PIPE DIMENSIONS CS & SS

Dimensions acc. ANSI Nominal Pipe Size:

2"
do Pipe outside 60.33 mm
di Pipe inside 49.25 mm
s Pipe wallthkn. 5.54 mm Pipe schedule: 80
A Pipe section 9.54 cm Capacity v = (m/s)
O Circumference 189.53 mm C1 0.50 3.43 m/h
S Surface 0.1895 m/m C2 1.00 6.86 m/h
W1 Weight 7.4857 kg/m C3 1.50 10.29 m/h
W2 Weight full of water 9.3907 kg/m C4 Choose 1.50 10.29 m/h

Dim. acc. DIN 2448 (seaml.) Diameter Nominal: -

do Pipe outside 10.20 mm
di Pipe inside 6.60 mm
s Pipe wallthkn. 1.80 mm Wallthickness (mm) 1.8
A Pipe section 0.48 cm Capacity v = (m/s)
O Circumference 32.04 mm C1 0.50 0.06 m/h
S Surface 0.0320 m/m C2 1.00 0.10 m/h
W1 Weight 0.3729 kg/m C3 1.50 0.12 m/h
W2 Weight full of water 0.4071 kg/m C4 Choose 1.50 0.15 m/h

Dim. acc. DIN 2458 (welded) Diameter Nominal: 10

do Pipe outside 13.50 mm
di Pipe inside 6.30 mm
s Pipe wallthkn. 3.60 mm Wallthickness (mm) 3.6
A Pipe section 1.12 cm Capacity v = (m/s)
O Circumference 42.41 mm C1 0.50 0.06 m/h
S Surface 0.0424 m/m C2 1.00 0.09 m/h
W1 Weight 0.8789 kg/m C3 1.50 0.11 m/h
W2 Weight full of water 0.9101 kg/m C4 Choose 2.80 0.25 m/h

Dim. Stainless steel pipes Pipe dimensions (mm)

do Pipe outside 1.59 mm
1.59 x 0,51 (1/18" OD)
di Pipe inside #VALUE! mm
s Pipe wallthkn. #VALUE! mm
A Pipe section #VALUE! cm Capacity v = (m/s)
O Circumference 5.00 mm C1 0.50 #VALUE! m/h
S Surface 0.0050 m/m C2 1.00 #VALUE! m/h
W1 Weight #VALUE! kg/m C3 1.50 #VALUE! m/h
W2 Weight full of water #VALUE! kg/m C4 Choose 1.50 #VALUE! m/h
1

Dim. Cast iron pipes Nominal Pipe Size:

do Pipe outside 96.52 mm
Cast iron pipe Class 100 ft (43# ) Size 3"
di Pipe inside 76.71 mm
s Pipe wallthkn. 9.91 mm
A Pipe section 26.95 cm Capacity v = (m/s)
O Circumference 303.23 mm C1 0.50 8.32 m/h
S Surface 0.3032 m/m C2 1.00 #VALUE! m/h
W1 Weight 21.1595 kg/m C3 1.50 #VALUE! m/h
W2 Weight full of water 25.7809 kg/m C4 Choose 2.00 #VALUE! m/h
 PIPE DATA acc ANSI B 16.5

NPS DN OD 5S 5 10S 10 20 30 40S Std. 40 60 80S XS 80 100 120 140 160 XXS

1/8" 6 10.29 - - - - - - 1.73 1.73 1.73 - 2.41 2.41 2.41 - - - - -

1/4" 10 13.72 - - - - - - 2.24 2.24 2.24 - 3.02 3.02 3.02 - - - - -
3/8" - 17.15 - - - - - - 2.31 2.31 2.31 - 3.20 3.20 3.20 - - - - -
1/2" 15 21.34 1.65 1.65 2.11 2.11 - - 2.77 2.77 2.77 - 3.73 3.73 3.73 - - - 4.75 7.47
3/4" 20 26.67 1.65 1.65 2.11 2.11 - - 2.87 2.87 2.87 - 3.91 3.91 3.91 - - - 5.54 7.82
1" 25 33.40 1.65 1.65 2.77 2.77 - - 3.38 3.38 3.38 - 4.55 4.55 4.55 - - - 6.35 9.09
1" 32 42.16 1.65 1.65 2.77 2.77 - - 3.56 3.56 3.56 - 4.85 4.85 4.85 - - - 6.35 9.70
1" 40 48.26 1.65 1.65 2.77 2.77 - - 3.68 3.68 3.68 - 5.08 5.08 5.08 - - - 7.14 10.16
2" 50 60.33 1.65 1.65 2.77 2.77 - - 3.91 3.91 3.91 - 5.54 5.54 5.54 - - - 8.71 11.07
2" 65 73.03 2.11 2.11 3.05 3.05 - - 5.16 5.16 5.16 - 7.01 7.01 7.01 - - - 9.53 14.02
3" 80 88.90 2.11 2.11 3.05 3.05 - - 5.49 5.49 5.49 - 7.62 7.62 7.62 - - - 11.13 15.24
3" - 101.60 2.11 2.11 3.05 3.05 - - 5.74 5.74 5.74 - 8.08 8.08 8.08 - - - - 16.15
4" 100 114.30 2.11 2.11 3.05 3.05 - - 6.02 6.02 6.02 - 8.56 8.56 8.56 - 11.13 - 13.49 17.12
5" 125 141.30 2.77 2.77 3.40 3.40 - - 6.55 6.55 6.55 - 9.53 9.53 9.53 - 12.70 - 15.88 19.05
6" 150 168.28 2.77 2.77 3.40 3.40 - - 7.11 7.11 7.11 - 10.97 10.97 10.97 - 14.27 - 18.24 21.95
8" 200 219.08 2.77 2.77 3.76 3.76 6.35 7.04 8.18 8.18 8.18 10.31 12.70 12.70 12.70 15.06 18.24 20.62 23.01 22.23
10" 250 273.05 3.40 3.40 4.19 4.19 6.35 7.80 9.27 9.27 9.27 12.70 12.70 12.70 15.06 18.24 21.41 25.40 28.58 25.40
12" 300 323.85 3.96 4.19 4.57 4.57 6.35 8.38 9.53 9.53 10.31 14.27 12.70 12.70 17.45 21.41 25.40 28.58 33.32 25.40
14" 350 355.60 3.96 - 4.78 6.35 7.92 9.53 - 9.53 11.13 15.06 - 12.70 19.05 23.80 27.76 31.75 35.71 -
16" 400 406.40 4.19 - 4.78 6.35 7.92 9.53 - 9.53 12.70 16.66 - 12.70 21.41 26.19 30.94 36.53 40.46 -
18" 450 457.20 4.19 - 4.78 6.35 7.92 11.13 - 9.53 14.27 19.05 - 12.70 23.80 29.36 34.93 39.67 45.24 -
20" 500 508.00 4.78 - 5.54 6.35 9.35 12.70 - 9.53 15.06 20.62 - 12.70 26.19 32.54 38.10 44.45 49.99 -
22" 550 558.80 4.78 - 5.54 6.35 9.35 12.70 - 9.53 15.88 22.23 - 12.70 28.57 34.92 41.27 47.62 53.97 -
24" 600 609.60 5.54 - 6.35 6.35 9.35 14.27 - 9.53 17.45 24.59 - 12.70 30.94 38.89 46.02 52.37 59.51 -
26" 650 660.40 - - - 7.92 12.7 - - 9.53 - - - 12.70 - - - - - -
28" 700 711.20 - - - 7.92 12.7 15.87 - 9.53 - - - 12.70 - - - - - -
30" 750 762.00 - - - 7.92 12.7 15.87 - 9.53 - - - 12.70 - - - - - -
32" 800 812.80 - - - 7.92 12.7 15.87 - 9.53 17.45 - - 12.70 - - - - - -
34" 850 863.60 - - - 7.92 12.7 15.87 - 9.53 17.45 - - 12.70 - - - - - -
36" 900 914.40 - - - 7.92 12.7 15.87 - 9.53 19.05 - - 12.70 - - - - - -
38" 950 965.20 - - - - - - - 9.53 - - - 12.70 - - - - - -
40" 1000 1016.00 - - - - - - - 9.53 - - - 12.70 - - - - - -
42" 1050 1066.80 - - - - - - - 9.53 - - - 12.70 - - - - - -
44" 1100 1117.60 - - - - - - - 9.53 - - - 12.70 - - - - - -
46" 1150 1168.40 - - - - - - - 9.53 - - - 12.70 - - - - - -
48" 1200 1219.20 - - - - - - - 9.53 - - - 12.70 - - - - - -

345626552.xls Tabblad
]02/16/2017
 WELDING NECK FLANGE & PIPE DIMENSIONS

do
di s

d3
d2

d1
k
D

Flange dimensions
D Flange diam. 1162.1 mm
WNRF 600# ANSI B16.47-API 605 Size 34"
H Flange length 239.8 mm
b Flange thkn. incl. RF 147.6 mm Include data of following WN flanges:
d1 Diam. raced face 952.5 mm ANSI B 16.5 125-2500#
k Pitch circle 1054.1 mm ANSI B 16.5 Long WN fl. 150-2500#
n Number of bolts 24 pce ANSI B 16.31 Cast iron 25-800#
d2 Diam. boltholes 60.5 mm ANSI B 16.47 - API Std. 605 75-900#
d3 Diameter hub 914.4 mm ANSI B 16.47 - MSS SP-44 150-900#
f Raced face height 6.4 mm BS 10 tables A-T 43-1400#
r Round off 14.2 mm BS 10 Cast iron 200#
g Thickness of gasket 7.0 mm BS 3293 150-600#
L Required stud length 408.2 mm 1) BS 4772 Cast iron PN 10 -12
bt Bolt M56 BS 4504 PN 6 - 100
m Nut height 45 mm DIN 2630-2638 PN 1-160
W Weight 582 kg DIN 2627-2629 PN 250-400
DIN Cast iron 2532-33 PN 10-16
Surface finish DIN Cast iron 28604-07 PN 10-40
Stock DN < 24" 6,3-12,5 m NEN 5831-5835 PN 6 - 40
Stock DN > 24" 12,5-25,0 m JIS B 2210-2213 PN 5-40
Smooth 3,2-6,3 m Pressure vessels DIN 28034 -

1) for flange / flange connection

345626552.xls 02/16/2017 blad WN Flanges

 BLIND & SLIP ON FLANGES
Blind flange acc.:
ANSI B 16.5, MSS-SP44
D
BS 3293, DIN 2527 d2

d1
k
Slip-on flange acc.:
DIN 1882, NEN 5818/19 D
DIN 2573/76 d2

d4
k
Slip-on flange acc.:
ANSI B 16.5, MSS-SP44 D
BS 3293, DIN 86029/30 d3
d2 d4

d1
k

Flange dimensions
D Flange diameter 209.6 mm
SORF 400# ANSI B16.5 Size 3"
h Flange height 52.4 mm
b / b1 Flange thickness 38.2 mm Include data of following flanges:
d1 Diameter RF 127.0 mm SO/BL RF ANSI B 16.5 125-1500#
k Pitch circle bolts 168.1 mm SO/BL RF ANSI B 16.47-MSS SP-44 150-900#
n Number of bolts 8 pce SO/BL RF ANSI B 16.47-API 650 75-900#
d2 Diameter boltholes 22.4 mm SORF BS 3293 150-600#
d3 Diameter hub 117.3 mm SO DIN 2573 PN 6
f Heigt of RF 6.4 mm SO DIN 2576 PN 10
d4 Diameter pipe hole 90.7 mm SO DIN 2641-42 PN 6-10
g Thickness of gasket 4 mm SO DIN 2655-56 PN 16-25
L Required stud length 122.4 mm 1) BL DIN 2527 PN 6-100
bt Bolt M20 SORF DIN 86029-30 PN 10-16
m Nut height 16 mm SO DIN 1882 PN 10
W Weight 7.00 kg SO NEN 5818-19 PN 6-10
1) for flange / flange connection Pressure vessels DIN 28031-32-36

345626552.xls 02/16/2017 blad Blind & Slip-on fl.

 LAPJOINT FLANGE & STUB-END DIMENSIONS
D
d5
d3
d1
d2

d4
k

D
d1
d2
s1

d3 s
d4
k

Flange dimensions
D Flange diameter 584.2 mm
LJ 300# ANSI B16.5 Size 14"
h Flange height 111.3 mm
b1 Flange thickness 53.8 mm Include data of following LJ flanges:
b2 Stub-end height ASA 304.8 mm ANSI B 16.5 150 #
b2 Stub-end height MSS 152.4 mm ANSI B 16.5 300 #
b2 Collar height - mm MSS SP-44 150 #
k Pitch circle 514.3 mm MSS SP-44 300 #
n Number of bolts 20 pce DIN 2641 Carbon steel PN 6
bt Bolt M30 - DIN 2641 Aluminium PN 6
L Required bolt length 170.6 mm DIN 2642 Carbon steel PN 10
s Thickn. Stubend fl. mm Din 2642 Aluminium PN 10
s Thickn. Collar flange 0.0 mm
g Thickness of gasket 7.0 mm
m Thickness of nut 24.0 mm
s1 Thickness pipe 0.0 mm
d1 Stub-end/collar diam. 355.6 mm
d2 Diam. boltholes 31.7 mm W1 Weight flange 70.90 kg
d3 Diam. flangehole 360.2 mm W2 Weight collar - kg
d4 Diameter rim 412.8 mm W2 Weight stub / collar kg
d5 Diameter hub 425.4 mm W2 Weight stub MSS kg

345626552.xls 02/16/2017 blad Lapjoint fl.

 WN & SO ORIFICE FLANGES

d3
do
di
s

d2

d1
k
D

d3
di

d2

d1
k
D

Flange dimensions
D Flange diam. 647.7 mm WNRF 300# Ansi B16.36 Size 16"
H Flange length 146.1 mm
b Flange thkn. incl. RF 57.2 mm Include data of following flanges:
d1 Diam. raced face 469.9 mm
k Pitch circle 571.5 mm Ansi B 16.36 WN Orifice fl. 300-2500#
n Number of bolts 20.0 pce Ansi B 16.36 SO Orifice fl. 300#
d2 Diam. boltholes 35.1 mm
d3 Diameter hub 482.6 mm
e Centre of tapping hole 23.9 mm
f Raced face height 1.6 mm
r Round off 12.7 mm
g Thickness of gasket 7.0 mm
L Required stud length 183.3 mm 1)
bt Bolt M33
m Nut height 26.0 mm
W Weight 254.4 kg

1) for flange / flange connection

345626552.xls 02/16/2017 blad Orifice fl.

 DIMENSIONS of ELBOWS, TEES & CAPS
Elbow 90- LR (R=1,5D) acc. ANSI B 16.9
Diam. outside Do 33.40 mm Size
Diam. Inside std. Di 26.64 mm
1"
Diam. Inside XS Di 24.30 mm
Wallth. Std. s 3.38 mm
Wallth. XS s 4.55 mm
Center to end R 38.10 mm
Weight Std. W 0.15 kg
Weight XS W 0.19 kg

Elbow 90- SR (R=D) acc. ANSI B 16.9

R
Diam. outside Do 33.40 mm Size
Diam. Inside std. Di 26.64 mm
1"
Diam. Inside XS Di 24.30 mm s
Wallth. Std. s 3.38 mm
Wallth. XS s 4.55 mm D
Center to end R 25.40 mm
Weight Std. W 0.10 kg
Weight XS W 0.13 kg

Elbow 45- LR (R=1,5D) acc. ANSI B 16.9

Diam. outside Do 114.30 mm Size B
Diam. Inside std. Di 102.26 mm
4"
Diam. Inside XS Di 97.18 mm
Wallth. Std. s 6.02 mm
Wallth. XS s 8.56 mm
Center to end B 63.50 mm
B
Weight Std. W 1.95 kg
Weight XS W 2.66 kg

Straight Tee acc. ANSI B 16.9

Diam. outside Do 33.40 mm Size
Diam. Inside std. Di 26.64 mm D
1"
Diam. Inside XS Di 24.30 mm
Wallth. Std. s 3.38 mm
Wallth. XS s 4.55 mm C
Center to end (run) E 38.10 mm
Center to end (branch) C 38.10 mm D
End to end F 76.20 mm
Weight Std. W 0.34 kg
s
Weight XS W 0.42 kg E E
Cap acc. ANSI B 16.9
Diam. outside Do 33.40 mm Size
Diam. Inside std. Di 26.64 mm
1"
Diam. Inside XS Di 24.30 mm
Wallth. Std. s 3.38 mm
Wallth. XS s 4.55 mm
H
Cap length Std. H 38.10 mm
Cap length XS H 38.10 mm
Weight Std. W 0.10 kg
s
Do
Weight XS W 0.13 kg

345626552.xls 02/16/2017 blad Fittings

 DIMENSIONS of REDUCERS & REDUCED TEES
Conc. reducer acc. ANSI B16.9 run-size
Diam. outside D1 26.67 mm Size
Diam. Inside Std. Di 20.93 mm
3/4" x 3/8"
Diam. Inside XS Di 18.85 mm
Wallth. Std. s1 2.87 mm s1
Wallth. XS s1 3.91 mm
Length L 38.10 mm s2
red.-size
Diam. outside D2 17.15 mm
Diam. Inside Std. Di 12.53 mm D1 D2
Diam. Inside XS Di 10.75 mm
Wallth. Std. s2 2.31 mm
Wallth. XS s2 3.20 mm
Weight Std. W 0.09 kg
Weight XS W 0.11 kg L

Exc. reducer acc. ANSI B16.9 run-size

Diam. outside D1 26.67 mm Size
Diam. Inside Std. Di 20.93 mm
3/4" x 3/8"
Diam. Inside XS Di 18.85 mm
Wallth. Std. s1 2.87 mm s1
Wallth. XS s1 3.91 mm
Length L 38.10 mm
Center to center M 4.76 mm s2
red.-size
Diam. outside D2 17.15 mm
D1
Diam. Inside Std. Di 12.53 mm M
Diam. Inside XS Di 10.75
D2
mm
Wallth. Std. s2 2.31 mm
Wallth. XS s2 3.20 mm
Weight Std. W 0.09 kg L
Weight XS W 0.11 kg

Reduced Tee acc. ANSI B16.9 run-size

Diam. outside D1 21.34 mm Size
Diam. Inside Std. Di 15.80 mm
1/2"x1/2"x1/4"
Diam. Inside XS Di 13.88 mm
Wallth. Std. s1 2.77 mm E E
Wallth. XS s1 3.73 mm D2
Center to end E 25.40 mm s2
End to end (branch) C 25.40 mm
End to end (run) F 50.80 mm
red.-size
C
Diam. outside D2 13.72 mm
Diam. Inside Std. Di 9.24 mm D1
Diam. Inside XS Di 7.68 mm
Wallth. Std. s2 2.24 mm
Wallth. XS s2 3.02 mm s1 F
Weight Std. W 0.10 kg
Weight XS W 0.12 kg

345626552.xls 02/16/2017 blad Red. fittings

 DIMENSIONS of SWAGE NIPPLES

H2 D2

D1
H1

Swage nipples acc. Ansi B 16.5 Size:

Diameter outside runsize D1 17.15 mm
3/8" x 1/4"
Diameter outside red.size D2 13.72 mm
Nipple length A 64.00 mm
Red. neck length F 16.00 mm
Threaded length runsize H1 10.00 mm
Threaded length red.size H2 8.00 mm
Centre to centre E 1.72 mm
Weight sch. 40 G 0.08 kg
Weight sch. 80 G 0.08 kg
Weight sch. 160 G 0.11 kg
Weight sch. XXS G 0.13 kg

Abbriviations:
BEB Both Ends Bevelled
BEG Both Ends Grooved
BEP Both Ends Plain
BET Both Ends Threaded
BLE/GSE Bevelled Large End - Grooved Small End
BLE/PSE Bevelled Large End - Plain Small End
BLE/TSE Bevelled Large End - Threaded Small End
BOE Bevelled One End
GBE Grooved Both Ends
GOE Grooved One End
LEBG Large End Bevelled - small end Bevelled
LEBP Large End Bevelled - small end Plain
LEBT Large End Bevelled - small end Threaded
LEGB Large End Grooved - small end Bevelled
LEGP Large End Grooved - small end Plain
LEGT Large End Grooved - small end Threaded
LEPB Large End Plain - small end Bevelled
LEPG Large End Plain - small end Grooved
LEPT Large End Plain - small end Threaded
LETB Large End Threaded - small end Bevelled
LETP Large End Threaded - small end Plain
PBE Plain Both Ends
PLE/BSE Plain Large End - Bevelled Small End
PLE/GSE Plain Large End - Grooved Small End
PLE/TSE Plain Large End - Threaded Small End
POE Plain One End
TBE Threaded Both Ends
TLE/BSE Threaded Large End - Bevelled Small End
TLE/GSE Threaded Large End - Grooved Small End
TLE/PSE Threaded Large End - Plain Small End
TOE Threaded One End

345626552.xls 02/16/2017 blad Swage nipples

345626552.xls 02/16/2017 blad Swage nipples