Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DC-DC Full Bridge Transformer: Features Applications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

PRODUCT DATA SHEET

DC-DC Full Bridge Transformer P2470


Features Applications

∗ 1250Vrms Isolation ∗ Isolated RS-485 interface


∗ Surface Mount ∗ LTC 1535, MAX3553E and MXL1535E
∗ RoHS compliant circuits
∗ Wide operating temperature ∗ Power across safety barrier

DESCRIPTION

P2470 is an isolation transformer for use with P2470 is compliant with RoHS Directive
LTC1535, MAX3535E and MXL1535E isolated 2002/95/EC, and suitable for lead-free and
RS-485 transceivers. conventional placement and reflow.

ETALDOC 882/2 Page 1 of 4 July 2007


P2470
SPECIFICATIONS

Electrical

Values at T = 25ºC, unless otherwise stated.

Parameter Conditions Min Typ Max Units


Primary Inductance 1-4, 100kHz 250mV 382 500 711 µH
Turns ratio 1-4 : 5-6 : 6-8 - 1.0 : 1.375 : 1.375 - -
DC resistance 1-4 - - 0.62 Ω
5-8 - - 2.5 Ω
Dielectric strength Pri : sec, pri : core 1250 - - Vrms
Sec : core 500 Vdc
Operating range Ambient temperature -40 - +85 ºC

TYPICAL APPLICATION

Typical Application
Fig. 1

5
1
+
10µF
6

4
8
P2470
2 3 11 14
LTC 1535/MAX3535E/MXL1535E

ETALDOC 882/2 Page 2 of 4 July 2007


P2470

CONSTRUCTION

Dimensions Connections
Fig. 2 6.0 Fig. 3
2.0 6.0
0.6
2.0

e2
8 5

ETAL

1.35
P2470

12.2
1 4
9.5
1.2

PCB PATTERN
5.6

1 : 1.375+ 1.375
1 5
8.2
11.6
6

4 8

Dimensions shown are in millimetres (inches).


Terminal plating JESD97 category = e2
Recommended reflow solder profile: 2 minutes @ 150-200ºC, 10 seconds @ 260ºC; time above 217ºC 60
seconds maximum

SAFETY ABSOLUTE MAXIMUM RATINGS

Manufactured from materials conforming to (Ratings of components independent of circuit).


flammability requirements of UL 94V-0.
Short term isolation voltage (1s) 1700Vrms

Storage temperature -40ºC to


+100ºC
Operating temperature -40ºC to
+85ºC
Soldering temperature profile peak 260ºC, 10s

ETALDOC 882/2 Page 3 of 4 July 2007


P2470

COPYRIGHT

ETAL and P2470 are Trade Marks of Profec Technologies Ltd.


The Trade Mark ETAL is registered at the UK Trade Marks Registry.

LTC1535 is trademark of Linear Technology, Inc.

MAX3535E and MXL1535E are trademarks of Maxim Integrated Products, Inc

Profec Technologies Ltd is the owner of the design right under the Copyright Designs and Patents Act 1988
and no rights or licences are hereby granted or implied to any third party.

© 2007 Profec Technologies Ltd.


Reproduction prohibited.

ISO 9001
FM 25326
ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela
Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333
Website: www.etalgroup.com Email: etalgroup@egruppen.com

ETALDOC 882/2 Page 4 of 4 July 2007

You might also like