Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 151 views

    Method OF Procedure: Adjw Creation

    Uploaded by

    lamsis8343
    This document provides instructions for creating an ADJW (adjacency) for inter-circle roaming (ICR) on a 3G network. It outlines prerequisites, tools used, steps to prepare and execute adjacency creation commands, testing plans, rollback procedures, and emergency contacts. The purpose is to describe the actions needed to define an ADJW for ICR between sites on a Nokia BSC network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Method OF Procedure: Adjw Creation

    Uploaded by

    lamsis8343
    151 views8 pages
    This document provides instructions for creating an ADJW (adjacency) for inter-circle roaming (ICR) on a 3G network. It outlines prerequisites, tools used, steps to prepare and execute adjacency creation commands, testing plans, rollback procedures, and emergency contacts. The purpose is to describe the actions needed to define an ADJW for ICR between sites on a Nokia BSC network.

    Original Title

    ADJW_Creation_For_Internal_use_only_METH.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for creating an ADJW (adjacency) for inter-circle roaming (ICR) on a 3G network. It outlines prerequisites, tools used, steps to prepare and execute adjacency creation commands, testing plans, rollback procedures, and emergency contacts. The purpose is to describe the actions needed to define an ADJW for ICR between sites on a Nokia BSC network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    151 views8 pages

    Method OF Procedure: Adjw Creation

    Uploaded by

    lamsis8343
    This document provides instructions for creating an ADJW (adjacency) for inter-circle roaming (ICR) on a 3G network. It outlines prerequisites, tools used, steps to prepare and execute adjacency creation commands, testing plans, rollback procedures, and emergency contacts. The purpose is to describe the actions needed to define an ADJW for ICR between sites on a Nokia BSC network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    ADJW Creation

    For Internal use only

    METHOD
    OF
    PROCEDURE

    3G

    ADJW CREATION
    (HO CREATION FOR 3G ICR)

    Nokia Siemens Networks Pvt Ltd.

    MS India
    Process & Quality Team

    Page 1
    ADJW Creation
    For Internal use only

    Document History

    Document Author Suresh Palani Specialist - Config Suresh.palani@nsn.co


    Mgt m
    Document Contributor(s) Soney M G Manager - BSS soney.m_g@nsn.com
    O&M

    Document Approver Vipindas Regional BSS vipindas.d@nsn.com


    Manager-South
    Document Release Authority Lalit Sharma National BSS- lalit.sharma@nsn.com
    Head

    Versions
    Date Name Version Platform Contents of change
    27/09/2011 Suresh Palani V1.0 Vendor Initial Document
    Platform:
    IPA 2800
    Software
    Version: RN
    4.0 for RNC
    2600

    Page 2
    ADJW Creation
    For Internal use only

    Table of contents

    1. Purpose and Scope of Document .................................................................................................4


    2. Prerequisite ..................................................................................................................................4
    3. Compatibility / Dependencies to other products/system/owner ..................................................... 4
    4. Acronym Glossary ........................................................................................................................4
    5. Assumptions & Out of Scope details ............................................. Error! Bookmark not defined.
    6. Relations with other work instructionns ........................................................................................4
    7. Detailed description ......................................................................................................................5
    7.1 Detailed job description..........................................................................................................5
    7.2 Tools Used. ...........................................................................................................................5
    7.3 Impact on Service ..................................................................................................................5
    7.4 Identification of the Stakeholders ...........................................................................................5
    7.5 Specific Instructions ( Entry / Exit Criteria) .............................................................................6
    7.6 Software backup and change control requirements ............................................................... 6
    7.7 Pre-Test Plan and expected results .......................................................................................6
    7.8 Detailed step-by-step procedures ..........................................................................................6
    7.9 Post-Test Plan and expected results......................................................................................7
    7.10 Roll back Plan ....................................................................................................................7
    7.11 Emergency Contact Details ................................................................................................7
    7.12 Additional Document Reference .........................................................................................7
    Appendix ..............................................................................................................................................7

    Page 3
    ADJW Creation
    For Internal use only

    1. Purpose and Scope of Document

    This technical document covers the activity of ADJW CREATION (HO CREATION FOR
    3G ICR) at site. The purpose of this document is to describe the actions needed for ADJW
    CREATION (HO CREATION FOR 3G ICR) Definition in the site. This document is intended for the
    use of Managed services professional only for the purpose of the agreement under which the
    document is submitted, and no part of it may be used, reproduced, modified or transmitted without
    the prior permission of Nokia Siemens Networks.

    2. Prerequisite

    • Engineer should have detailed knowledge about the architecture, Fault Management,
    Configuration & Integration of Nokia BSC.

    3. Compatibility / Dependencies to other products/system/owner

    NA

    4. Acronym Glossary

    Table 4.1 Acronym and Glossary

    S.No: Key Word Definition

    1. BTS Base Transeiver Station

    2. CI Cell Identity

    3. LAC Location Area Code

    4. ICR Inter Circle Roaming

    5. RNC Radio Network Controller

    6. BSC Base Station Controller

    5. Assumptions & Out of Scope details

    • NONE

    Page 4
    ADJW Creation
    For Internal use only

    6. Relations with other work instructions

    None

    7. Detailed description

    7.1 Detailed job description

    Step 1 : Prepare the command set for adjacency creation previously.

    Step 2 : Execute the prepared command set.

    Step 3 : Capture the logs and Debug the errors if any.

    7.2 Tools Used.

    (Vendor Platform, Software version, Application Details)

    • Tools Used: Reflection

    • Vendor platform: Nokia DX 200 BSC

    7.3 Impact on Service

    • NONE

    7.4 Identification of the Stakeholders

    • GNSC-CM team / GNSC-FM team

    • RF team

    Page 5
    ADJW Creation
    For Internal use only

    7.5 Specific Instructions (Entry / Exit Criteria)

    • Check the correct username and password of given BSC

    • Check the user rights of particular user name

    • Post check should be done befote exit

    7.6 Software backup and change control requirements

    • NA

    7.7 Pre-Test Plan and expected results

    STEP 1: Check for any incorrect or missing values in the data in CRF.
    STEP 2: Check if BSC name specified matches with BSC C-NUM specified.
    STEP 3: Check if data given is for one way or for two way neighbours. If given for one way, call
    initiator and confirm the same.

    7.8 Detailed step-by-step procedures

    • Open Reflection

    • Log into the specified BSC & Confirm the BSC name
    ZQNI;

    • Check the existing adjacencies to find the last next index number.
    ZEAP:BTS=<BTS NUMBER>;
    ZEAO:BTS=<BTS NUMBER>;

    • Create new adjacency.


    ZEAE:BTS=<BTS identification>:INDEX=<adjacent cell index>: RNC=<radio network
    controller identifier>, CI=<cell identification>: LAC=<location area code>,
    SAC=<service area code>, FREQ=<WCDMA downlink carrier
    frequency>,SCC=<scrambling code>;

    • Check the created adjacency as specified.


    ZEAP:BTS=<BTS NUMBER>;
    ZEAO:BTS=<BTS NUMBER>;

    Page 6
    ADJW Creation
    For Internal use only

    7.9 Post-Test Plan and expected results

    • Inform to RF Team the site adjacency created.

    7.10 Roll back Plan

    • NONE

    7.11 Emergency Contact Details

    Mandatory
    Name & Phone No. Contact details,time line Escalation Priority
    RF Engg
    SPOC

    Escalation Matrix
    Team Lead

    7.12 Additional Document Reference

    • NED of BSC

    Appendix

    Page 7
    ADJW Creation
    For Internal use only

    Page 8

    You might also like