Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 208 views

    DW 450 MLE - Motor Lead Flat Cable 450 °F

    Uploaded by

    Mario Diez
    This document summarizes Prysmian's DW 450 MLE motor lead flat cable for use in downhole extraction systems. The cable features solid copper conductors insulated with Kapton tape and EPDM rubber compound. It has a lead sheath over the insulation and an outer Monel 400 tape armour for protection. The cable is rated for temperatures up to 450°F and can withstand chemicals and gases downhole. It provides reliable power transmission to ESP systems for oil and gas extraction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DW 450 MLE - Motor Lead Flat Cable 450 °F

    Uploaded by

    Mario Diez
    208 views2 pages
    This document summarizes Prysmian's DW 450 MLE motor lead flat cable for use in downhole extraction systems. The cable features solid copper conductors insulated with Kapton tape and EPDM rubber compound. It has a lead sheath over the insulation and an outer Monel 400 tape armour for protection. The cable is rated for temperatures up to 450°F and can withstand chemicals and gases downhole. It provides reliable power transmission to ESP systems for oil and gas extraction.

    Original Description:

    Especificaciones de MLE(Motor Lead Cable) y prestaciones.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes Prysmian's DW 450 MLE motor lead flat cable for use in downhole extraction systems. The cable features solid copper conductors insulated with Kapton tape and EPDM rubber compound. It has a lead sheath over the insulation and an outer Monel 400 tape armour for protection. The cable is rated for temperatures up to 450°F and can withstand chemicals and gases downhole. It provides reliable power transmission to ESP systems for oil and gas extraction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    208 views2 pages

    DW 450 MLE - Motor Lead Flat Cable 450 °F

    Uploaded by

    Mario Diez
    This document summarizes Prysmian's DW 450 MLE motor lead flat cable for use in downhole extraction systems. The cable features solid copper conductors insulated with Kapton tape and EPDM rubber compound. It has a lead sheath over the insulation and an outer Monel 400 tape armour for protection. The cable is rated for temperatures up to 450°F and can withstand chemicals and gases downhole. It provides reliable power transmission to ESP systems for oil and gas extraction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Oil & Gas - Cable Solutions

    Exploration & Production

    ESP Cables
    Flat Cables

    DW 450 MLE - Motor Lead Flat Cable 450 °F


    Motor lead flat cable. For easier installation and maintenance, Prysmian ESP cables
    are shipped on reels of a continuous, splice-free length. Maximum permissible
    temperature is 450 °F (232 °C).

    APPLICATION DESIGN & CONSTRUCTION 1

    Downhole extraction systems are critical 1 CONDUCTOR 2


    for crude oil extraction. The reliability of Solid plain copper conductors.
    the electrical power supply to an Electrical
    Submersible Pump (ESP) system depends 2 TAPE
    on the performance and reliability of the Two layers of Kapton tape are applied on 3
    power feed through to the wellhead, power the conductors to allow high thermal and
    cable, motor lead cable, pig tail connectors electrical performances.
    and related equipment such as the pump and
    motor. Prysmian ESP cables offer an efficient, 3 INSULATION 4
    rugged and easy to handle solution that A proprietary high quality EPDM compound
    delivers reliable performance in a package that is chemically bonded to the conductor.
    is straightforward to install and maintain. It is specially formulated to provide high
    dielectric and low swell characteristics in
    presence of oil.
    5
    STANDARDS & APPROVALS
    4 LEAD SHEATH
    A continuous, impervious, fatigue and
    IEEE 1018 as far as applicable.
    corrosion resistant lead sheath is extruded
    over the insulation to provide excellent
    protection against oil, chemicals and gases
    QUALITY & TESTING and insulation decompression.
    6
    Prysmian has a built-in multi-step quality 5 BRAID
    assurance program, covering the production A synthetic braid, applied with full coverage
    process from cable design and raw material over the lead sheath, provides additional
    purchases to final inspection and testing mechanical reinforcement, hoop strength
    documentation. and armour bedding. A suitable overlapped
    tape can be used as an alternative.
    The ISO 9001 quality system of Prysmian Group
    (together with ISO 14001 and OHSAS 18001) 6 ARMOUR
    has been assessed, approved and is currently A 50% lapped, Monel 400 tape armour
    ESP 450 MLE - 09/2017

    audited by SGS. provides excellent mechanical protection


    with a high degree of flexibility and is
    available in thickness of 0.015”. Stainless
    steel or fully galvanized (4 sides) steel tape
    armour (thickness 0.020”) is available for
    use in less corrosive well environments.

    CONTACT INFO:
    prysmianoilandgas@prysmiangroup.com
    www.prysmiangroup.com/contact-us
    Oil & Gas - Cable Solutions

    Exploration & Production

    ESP Cables
    Flat Cables

    PERFORMANCES/RATINGS
    CHEMICAL MAXIMUM MIN. INSTALLATION MAX. RATED MIN. BENDING RADIUS
    RESISTANCE AXIAL LOAD TEMPERATURE TEMPERATURE FOR INSTALLED CABLES

    monel tape: excellent 50 N/mm2 -40 °F +450 °F 7 times


    (-40°C) (+232°C) major axis dimension

    TECHNICAL DATA
    DW 450 MLE - 3 Conductors KAPTON/EPDM/LEAD/MONEL 4 kV - MOTOR LEAD EXTENSION

    size conductor conductor insulation insulation dimensions overall weight electrical


    strands diameter thickness diameter under armour dimensions parameters
    r x
    (awg) (mm2) (nr) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb/kft) (kg/km) (Ω/kft) (Ω/kft)
    4 23,76 1 0,22 5,50 0,050 1,27 0,32 8,1 0.40x1.20 10.2x30.6 0.47x1.26 11.7x32.1 1478 2200 0,459 0,042

    6 15,34 1 0,18 4,42 0,050 1,27 0,28 7,0 0.36x1.07 9.1x27.3 0.45x1.17 11.5x29.7 1155 1719 0,730 0,045

    r = conductor electrical resistance at 450 °F | x= inductive reactance at 60 Hz Note: overall dimensions and weights are based on 0.015” armour tape thickness
    This product information sheet is provided for reference only.
    For Voltage Drop/Ampacity data, please contact your Prysmian representative.

    ESP 450 MLE - 09/2017

    CONTACT INFO:
    prysmianoilandgas@prysmiangroup.com
    www.prysmiangroup.com/contact-us

    You might also like