Higher Surveying Review Exam
Higher Surveying Review Exam
Higher Surveying Review Exam
The map distance between two benchmarks, A and B, is 15 cm and their elevations above sea level are 850.50 m and
939.60 m, respectively. Assuming uniformity of slope between A and B, determine the following:
1. Map distance from A where the contour will cross the line between two benchmarks when the elevation is 860 meters
above sea level.
a. 1.6 cm b. 5.0 cm c. 8.3 cm d. 11.7 cm
2. Map distance from A where the contour will cross the line between two benchmarks when the elevation is 880 meters
above sea level.
a. 1.6 cm b. 5.0 cm c. 9.50 d. 11.7 cm
3. Map distance from A where the contour will cross the line between two benchmarks when the elevation is 920 meters
above sea level.
a. 1.6 cm b. 8.3 cm c. 9.5 cm d. 11.7 cm
The longitude of Washington is 77°04’00” West and that of San Francisco is 122°25’45” West. Determine the following
4. Difference in solar time between Washington and San Francisco.
a. 3h 01m 27s b. 18h 25m 23s c. 9h 03m 00s d. 5h 42m 58s
5. Time in Washington when it is 9:03:00 AM at San Francisco
a. 04 : 27 PM b. 03 : 28 AM c. 06 : 06 PM d. 02 : 45 PM
6. Time at San Francisco when it is 7:54:30 PM at Washington
a. 02 : 12 PM b. 10 : 51 AM c. 01 : 29 AM d. 04 : 53 PM
The difference in elevation between two ground points, X and Y, is 38.25, and the horizontal distance between the two
points is 125.50 m.
7. Determine the slope between the points in percent.
a. 19.41 b. 16.95 c. 30.48 d. 3.28
8. Determine the slope between the points in gradient.
a. 19.41 b. 16.95 c. 30.48 d. 3.28
9. Determine the slope between the points in degrees.
a. 19.41 b. 16.95 c. 30.48 d. 3.28
10. The angle of intersection of a circular curve is 45° 30' and its radius is 198.17 m. PC is at Sta. 0 + 700. Compute the
right angle offset from Sta. 0 + 736.58 on the curve to tangent through PC.
a. 2.98 m b. 3.37 m c. 3.09 m d. 3.87 m
11. The angle of intersection of a circular curve is 36° 30'. Compute the radius if the external distance is 12.02 m.
a. 203.74 m b. 253.72 m c. 226.94 m d. 214.67 m
12. Given the following elements of a circular curve: middle ordinate = 2 m; length of long chord = 70 m. Find its degree
of curve, use arc basis.
a. 4.5° b. 5.3° c. 2.9° d. 3.7°
A reversed curve with diverging tangent is to be designed to connect to three traversed lines for the portion of the
proposed highway. The lines AB is 185 m, BC is 122.40 m, and CD is 285 m. The azimuth are Due East, 242°, and 302°
respectively. The following are the cost index and specification:
Type of Pavement = Item 311 (Portland Cement Concrete Pavement)
Number of Lanes = Two Lanes
Width of Pavement = 3.05 m per lane
Thickness of Pavement = 280 mm
Unit Cost = P1,800 per square meter
It is necessary that the PRC (Point of Reversed Curvature) must be one-fourth the distance BC from B.
20. A highway engineer must stake a symmetrical vertical curve where an entering grade of +0.80% meets an existing
grade of -0.40% at station 10 + 100 which has an elevation of 140.36 m. If the maximum allowable change in grade per 20
m station is -0.20%, what is the length of the vertical curve?
a. 150 m b. 130 m c. 120 m d. 140 m
“Our greatest glory is not in never falling, but in rising every time we fall”
- Confucius