Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Especificacoes Bloco 3114 - 3116 - 3126

    Uploaded by

    Rogério Reale
    This document provides specifications for cylinder blocks used in 3116 and 3126 truck engines. It lists 16 measurements related to features of the cylinder block like cup plug depth, dowel extension distances, camshaft and main bearing bore sizes, bearing cap widths, bolt torque specifications, and cylinder bore sizes. Precise tolerances are given for each dimension in both metric and US standard units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Especificacoes Bloco 3114 - 3116 - 3126

    Uploaded by

    Rogério Reale
    21 views3 pages
    This document provides specifications for cylinder blocks used in 3116 and 3126 truck engines. It lists 16 measurements related to features of the cylinder block like cup plug depth, dowel extension distances, camshaft and main bearing bore sizes, bearing cap widths, bolt torque specifications, and cylinder bore sizes. Precise tolerances are given for each dimension in both metric and US standard units.

    Original Description:

    Especificacoes Bloco 3114 - 3116 - 3126

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for cylinder blocks used in 3116 and 3126 truck engines. It lists 16 measurements related to features of the cylinder block like cup plug depth, dowel extension distances, camshaft and main bearing bore sizes, bearing cap widths, bolt torque specifications, and cylinder bore sizes. Precise tolerances are given for each dimension in both metric and US standard units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views3 pages

    Especificacoes Bloco 3114 - 3116 - 3126

    Uploaded by

    Rogério Reale
    This document provides specifications for cylinder blocks used in 3116 and 3126 truck engines. It lists 16 measurements related to features of the cylinder block like cup plug depth, dowel extension distances, camshaft and main bearing bore sizes, bearing cap widths, bolt torque specifications, and cylinder bore sizes. Precise tolerances are given for each dimension in both metric and US standard units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    3116 and 3126 Truck Engines Cylinder Block

    (1) Depth that cup plugs are installed (measured from block face to top edge of plug) …
    1.25 ± 0.25 mm (0.049 ± 0.010 in)
    (2) Distance all dowels extend from top face … 14 ± 2 mm (0.55 ± 0.08 in)
    (3) Distance two large dowels extend from rear face … 12.0 ± 0.5 mm (0.47 ± 0.02 in)
    (4) Distance all dowels extend from front face … 8.0 ± 0.5 mm (0.31 ± 0.02 in)

    (5) Bores in block for all camshaft bearings except front bearing … 69.000 ± 0.038 mm
    (2.7165 ± 0.0015 in)
    (6) Locate bearing oil hole for all camshaft bearings (except from bearing) at top of bore.
    (7) Bore in block for front camshaft bearing … 70.000 ± 0.025 mm (2.7559 ± 0.0010 in)
    (8) Front camshaft bearing joint location.
    (9) Front camshaft bearing oil hole.
    NOTE: Install front camshaft bearing with bearing oil hole (9) aligned with oil hole in block
    and bearing joint (8) positioned as shown.
    (10) Width of main bearing cap … 159.995 ± 0.020 mm (6.2990 ± 0.0008 in)
    Width of cylinder block main bearing cap … 160.000 ± 0.018 mm (6.2992 ± 0.0007 in)
    (11) Bore in block for main bearings … 95.000 ± 0.013 mm (3.7402 ± 0.0005 in)
    (12) Main bearing cap bolts. Install as follows:
    Install bearing caps with sequence number to the right, 1 through 7 (front to rear).
    a. Before assembly, put 2P2506 Thread Lubricant on the bolt threads and washer face.
    b. Tighten both bolts of each bearing cap to a torque of … 54 ± 7 N·m (40 ± 5 lb ft)
    c. Then tighten bolts an additional … 90 ± 5 degrees (1/4 turn
    (13) Location of bearing cap sequence number.
    (14) Dimension from centerline of crankshaft bore to pan rail … 110.00 mm (4.331 in)
    (15) Dimension from centerline of crankshaft bore to top of block … 322.00 mm (12.677 in)
    (16) Cylinder bore size (8WL1-UP) … 105 mm (4.134 in)
    Cylinder bore size (1WM1-UP) … 110 mm (4.331 in)
    NOTE: Bore size must be checked with a 4C4377 Cylinder Head Stress Plate and gasket
    installed. Refer to Installation Of 7C6208 Cylinder Sleeve, Special Instruction SEHS9047

    You might also like