New Generation of Pumps

The combination of "engineering plastic" and "stainless steel"

makes the pumps lighter in weight and greater in toughness.

Air vent valve

A ba ll-shape d air vent valve insta lled at the botto m of the
companion flange releases air that resides in the pump chamber,
thereby preventing an air lock.

Prevention of water leakage between

the pump and the automatic connection
The top of the pump chamber is provided with many holes for
releasing air, thereby stably installing the pump in place. This also
serves to prevent the leakage of water between the pump and the
automatic connection.

TORNADO FIN
Achieved long life of mechanical seal（Over 0.25kW）
（Applicable : CR & CRS 0.25∼0.75kW）

Equipped with TORNADO FIN to cool mechanical seal

chamber temperature so that deterioration of mechanical
seal can be prevented. Also, oil volume is increased 66％
(from 240cc to 400cc), therefore, more long life can be
achieved.

MOTOR SHAFT

TORNADO FIN Upper Mechanical Seal Sliding

OIL

Upper Mechanical Seal Rotation

Upper Mechanical Seal Temperature

120
︶
100 NORUS
deg

︵
Temperature Rise

80

60

40

20 New Type NORUS

0
0 100 200 300
Shaft Material SUS316 as standerd
Oil Decrease Volume（ml）
(Applicable:CR&CRS 0.25∼0.75kW)

Rubber protector fitted to important parts

The important parts which are made of a special-grade resin
having high impact strength are provided with a rubber protector
to further improve against impact resistance.
2
 ■ Principal Specifications
Waste water
One-point lifting for easy installation Applicable
Liquid type or raw water containing sludge
The pump can be easily hanged up and down using a single liquid
hole in the handle. Liquid temperature 0∼40℃

CR 0.1∼0.15kW:SUS420J2
CRS 0.25∼0.75kW:SUS316
Pump shaft
Screws which hardly become loose 1.5∼2.2kW:SUS304
CRC 0.4∼2.2kW:SUS304
The use of glass fiber and a specially designed screw taking
into consideration the pump deformation with the lapse of time Material Stator casing SUS304
and due to heat prevents the leakage of water caused by
loose screws.
Pump casing
Engineering Plastic
（reinforced with glass fiber）
Excellent corrosion resistance Impeller

SUS 304 and engineering plastic are also used for the stator Vortex:CR,CRS
casing and wet part, offering better corrosion resistance than Impeller Closed:CRC
the cast iron ones in conventional models. As a result, the
"NORUS" of pumps achieves good corrosion resistance even Double mechanical seal
under severer working conditions. In addition, the "NORUS" is Structure
Wet side：SiC x SiC
hardly damaged by rust. Normally, only maintenance required Motor side：Ceramic x Carbon
shaft seal
of the "NORUS" is washing. （0.1∼0.75kW）
SiC x SiC
（1.5∼2.2kW）

Seamless Stator Casing Structure

Type Air filled-type submersible induction motor
No welded area, improved corrosion
resistance by enlarged seal width
Insulation class Class E
（Applicable : CR & CRS 0.15∼0.75kW）
Motor
Single phase Three phase
Seamless stator casing structure is employed by press process Phase
（0.1∼0.4kW） （0.15∼2.2kW）
so that no welded area on stator casing to prevent rust from
junction. Starting method Condenser-run Direct
Also, packing seal width is enlarged to prevent rust between gap.
Upper Motor Seal Lower Motor Seal

■ New Type ■ Former Type ■ New Type ■ Former Type High Pumping Capability
with Automatic Connection
Packing Seal Width（3.5mm）

Packing
Seal Width
Packing
（1mm） Packing Line up with auto-connecting type
Seal Width
Seal Width（3.5mm）
（1mm） for easy installation and maintenance.
Anti floating mechanism is provided
for connection. Also, in combination
Tough against dry operation with special packing to prevent
Continuous dry ope ra ti on for 30 mi nut es is re alized by water leakage so that pumping
empl oying mo to r with few rises in heat. “NORUS ”is loss is prevented.
designed for longer operating life by suppressing rise in heat
of bearing.

Wear resistant vortex impeller which is

hardly clogged with foreign matter
Model CR and CRS employ a vortex type impeller. Since the
vortex impeller reduces the tangling of fibrous matter, the CR
series is comparable or superior in pumping performance to
conventi onal vorte x ty pe pumps. The impeller is made of
engineering plasti c having excellent wear re sistance. It is
more than 100 times as strong as impellers made of ordinary
ABS re sin against th e wear caused by sand, detergents,
solids, etc. contained in sludge. Therefore, the "NORUS" can
be used even in raw water containing considerable amounts
of solids.
Water Flow
Connection Side

Pump Side

Impeller made of engineering plastic Impeller made of ordinary ABS resin

Afte r 200 hour s of pump operation Loss of Afte r 24 hours of pu mp ope ra ti on Loss of
Water flow and contact mechanism Water Flow
impeller weight：3.3％ impeller weight：46％
*Test condition：Pump was operated in 600 liters of water containing 120 kg of s and.

3
 Lightweight Submersible Pump ● Application
・ For tr eating r aw wat er
at wat er treatment
plants ,etc .
・ For controlling liquid
［Actual Size］ ［Actual Size］ fl ow r at e
Debris Passage Dia Debris Passage Dia ・ For returning sludge

35mm 46mm
High passing capability type
materialized as a result of
giving priority to the smooth 0.15∼0.75kW
passing of foreign matter
1.5・2.2kW

Non-Auto-Operation Auto-Operation Auto-Alternate Operation

■Standard Specifications
Pump Model Connection Part No. CapacityーTo ta l Head Weight（kg）
Bore Output
Non-Auto- Auto- Auto-Alternate Op er ation Auto- Free Phase m3/m inーm CR-D
mm kW CR
ペア呼称 No.2 Connecting Standing
Op er ation Op er ation Pair Designation Pump No.1＋Pump 50Hz 60 Hz CR-W
0. 15 0. 1 ー 3. 5 0. 1 ー 3. 5 5. 5 6. 0
CR501S CR501DS CR501DWS CR501WS＋CR501DS 1 0. 25 0. 13 ー 4. 5 0. 13 ー 4. 8 7.0 7.5
0. 4 0. 16 ー 6. 8 0. 16 ー 6. 4 8. 2 8.7
50 P50R L F50 0. 15 0. 1 ー 3. 5 0. 1 ー 3. 5 4. 9 5. 4
CR501T CR501DT ー ー 0. 25 0. 13 ー 4. 5 0. 13 ー 4. 8 6. 3 6. 8
3
0. 4 0. 16 ー 6. 8 0. 16 ー 6. 4 7.4 7.9
CR501 CR501D ー ー 0.75 0. 22 ー 8. 8 0. 22 ー 8. 9 8. 8 9 .3
CR65 ー ー ー 1. 5 0. 35 ー 9. 8 0. 30 ー 9.7 16 ー
65 P65N R F65N 3
CR80 ー ー ー 2. 2 0. 35 ー 13. 0 0. 35 ー 12 .6 19 ー
CR65 ー ー ー 1. 5 0. 35 ー 9. 8 0. 30 ー 9.7 16 ー
80 P80N R F80N 3
CR80 ー ー ー 2. 2 0. 35 ー 13. 0 0. 35 ー 12 .6 19 ー

■Performance Curves ■Standard Accessories

・Cable（5m）0.15∼0.75k W・
・・1 ・Float switch・
・・・
・・・
・・・
・・・
・1
（8m）1.5・2.2k W・ ・・1 （for type D/W）
・Screw coupling・・・・
・・・
・・1
・Spare nameplat e・・
・・・
・・1
    
 
Total Head（m）

Total Head（m）

 
   

2.
2.

2k  
2k

W    1
W

1.   .5
kW kW
 

●Auto-connection set
5

0.
 
0.

75

 
 
75

0
kW

・Connection
 
kW

0. kW
0.

4k
.4

25

・Guide holder（with bolts & nu ts ）

W
kW
0.
25

・Sliding bracket
 
kW

0
0.
15

・Lift ing chain

.1
5k

kW
W

・Shackle

Capacity（m3/min） Capacity（m3/min）

4
※ 0. 15∼0.75kW Performa nce Curves show Free Standing typ e.
 Lightweight Submersible Pump ● Application
・ For tr eating r aw wat er
at wat er treatment
plants ,etc .
・ For controlling liquid
fl ow r at e
［Actual Size］ ［Actual Size］ ［Actual Size］ ・ For returning sludge
Debris Passage Dia Debris Passage Dia Debris Passage Dia
20mm 25mm 30mm
Universal type with improverd
passing capability and pumping 0.1∼0.25kW
0.4・0.75kW
performance available 1.5・2.2kW

Non-Auto-Operation Auto-Operation Auto-Alternate Operation

■Standard Specifications
Pump Model Connection Part No. CapacityーTo ta l Head Weight（kg）
Bore Auto-Alternate Op er ation Phase Output
Non-Auto- Auto- Auto- Free m3/m inーm CRS-D
mm kW CRS
ペア呼称 No.2 Connecting Standing
Op er ation Op er ation Pair Designation Pump No.1＋Pump 50Hz 60 Hz CRS-W
− 0. 1 0. 08 ー 2. 9 0.08 ー 3.2 4. 5 5. 0
32 CRS3 21 S CRS321DS CRS321DWS CRS321WS＋CRS321DS F32 1
P32R L 0. 15 0. 1 ー 3. 9 0.1 ー 3. 9 5. 4 5. 9
0. 15 0. 1 ー 3. 9 0.1 ー 3.9 5. 4 5. 9
CRS401S CRS401DS CRS401DWS CRS401WS＋CRS40 1DS 1
0. 25 0. 13 ー 5. 3 0.13 ー 5. 4 6. 9 7.4
40 P40R L F40
0. 15 0. 1 ー 3. 9 0.1 ー 3.9 4. 8 5. 3
CRS401T CRS401DT CRS401DWT CRS401WT＋CRS40 1DT 3
0. 25 0. 13 ー 5. 3 0.13 ー 5. 4 6. 2 6.7
CRS501S CRS501DS CRS501DWS CRS501WS＋CRS501DS 1 0. 4 0. 16 ー 7.2 0.16 ー 6. 8 8. 1 8. 6
CRS501T CRS501DT CRS501DWT CRS501WT＋CRS501DT P50R L F50 0. 4 0. 16 ー 7.2 0.16 ー 6.8 7.3 7.8
50 3
CRS501 CRS501D CRS501DW CRS501W＋CRS501D 0.75 0. 22 ー 9. 2 0.22 ー 9.4 8.7 9. 2
CRS65 CRS65D CRS65D W CRS65W＋CRS65D P50N R F50N 3 1. 5 0. 4 ー 9. 9 0. 4 ー 7.8 16 16. 5
CRS65 CRS65D CRS65D W CRS65W＋CRS65D 1. 5 0. 35 ー 10.5 0. 30 ー 10.5 16 16. 5
65 P65N R F65N 3
CRS80 C RS80 D CRS80D W CRS80W＋CRS80D 2. 2 0. 35 ー 14 .1 0. 35 ー 13 .4 19 19. 5
CRS65 C RS65 D CRS65D W CRS65W＋CRS65D 1. 5 0. 35 ー 10.5 0. 30 ー 10.5 16 16. 5
80 P80N R F80N 3
CRS80 C RS80 D CRS80D W CRS80W＋CRS80D 2. 2 0. 35 ー 14 .1 0. 35 ー 13 .4 19 19. 5

■Performance Curves ■Standard Accessories

・Cabl e（5m）0.1∼0.75kW・
・・・1 ・Float switch・
・・・
・・・
・・・
・・・
・1
（8m）1.5・2.2k W・ ・・1 （for type D/W）
・Screw coupling・・・・
・・・
・・1
・Spare nameplat e・・
・・・
・・1
  2.
 
Total Head（m）

Total Head（m）

2.2   2k
k 1. W
W 5
1.5
kW
kW

 0
 0 .75
kW
●Auto-connection set
.75  
 0 kW 0. ・Connection
 
.4k   4kW
     W 0. ・Guide holder（with bolts & nu ts ）
25
 

 
0.1 0.2   .1 kW
 

5 k 5k 0 ・Sliding bracket
0 1k

5k
  W W
W W ・Lift ing chain
.

0.1
kW
・Shackle

Capacity（m3/min） Capacity（m3/min）
5
※ 0. 1∼0.75 kW Performa nce Curves show Free Standing typ e.
 ● Application
Lightweight Submersible Pump

CRC
［Actual Size］ ［Actual Size］ ・ For use at water treatment facilities, etc, to
suppress foaming or to discharge treated
waste water
・ For use to discharge rain water or spring
water from underground passages, etc.
・ For use to drain buildings, factories,
basements, etc.
Debris Passage Dia Debris Passage Dia

High pump head with closed 7mm 12mm

impeller 0.4・0.75kW 1.5・2.2kW

Non-Auto-Operation Auto-Operation Auto-Alternate Operation

■Standard Specifications
Pump Model Connection Part No. CapacityーTotal Head Weight（kg）
Bore Output
Non-Auto- Auto- Auto-Alternate Operation
Auto- Free Phase m3/minーm CRC-D
mm kW CRC
Operation Operation Pair Designation Pump No.1＋Pump
ペア呼称 No.2 Connecting Standing 50Hz 60Hz CRC-W

CRC40S CRC40DS ー ー 1 0.05 ー 14.2 0.05 ー 14.0 8.9 9.4

40 P40RH F40 0.4
CRC40T CRC40DT ー ー 3 0.05 ー 14.2 0.05 ー 14.0 8.8 9.3

ー ー P50RH F50 0.75 0.10 ー 16.0 0.10 ー 17.0 10.2 10.7

50 CRC50 CRC50D 3
CRC50DW CRC50W＋CRC50D P50NR F50N 1.5 0.2 ー 18.2 0.2 ー 18.4 16 16.5

CRC50 CRC50D CRC50DW CRC50W＋CRC50D 1.5 0.2 ー 18.2 0.2 ー 18.4 16 16.5
65 P65NR F65N 3
CRC65 CRC65D CRC65DW CRC65W＋CRC65D 2.2 0.3 ー 20.6 0.3 ー 21.3 19 19.5

80 CRC65 CRC65D CRC65DW CRC65W＋CRC65D P80NR F80N 3 2.2 0.3 ー 20.6 0.3 ー 21.3 19 19.5

■Performance Curves ■Standard Accessories

30 30 ・Cable（5m）0.4・0.75kW・
・・1 ・Float switch・
・・・
・・・
・・・
・・・
・1
28 28 （8m）1.5・2.2kW・・・1 （for type D/W）
26
50Hz 26
60Hz
・Screw coupling・
・・・
・・・
・・1
24 2. 2 24
kW 2.2 ・Spare nameplate・・
・・・
・・1
22 22 kW
Total Head（m）

Total Head（m）

20 20 1.5
1.5 kW
18 18
k W
16 16
0.7
0.7

14 14
5kW

●Auto-connection set
5kW

0.4

12 12
0 .4k

・Connection
kW

10 10
W

8 8 ・Guide holder（with bolts & nuts）

6 6
・Sliding bracket
4 4
2 2 ・Lifting chain
0 0 ・Shackle
0 0.2 0.4 0.6 0.8 0 0.2 0.4 0.6 0.8
Capacity（m3/min） Capacity（m3/min）

6
Dimensions
Auto Connecting Type Free Standing Type

350

350

350

C
C
C

C
B B B
B B B
550 550 550
Continuous Pump Operation

Continuous Pump Operation

Max.Stop Level
Stop Level

Max.Stop Level
Stop Level
Starting Level
Minimum Water Level for

Starting Level
Minimum Water Level for
Stop Level
Water Level

Stop Level
Water Level
Starting Level

Stop Level
Minimum

Minimum
F
E

E
E

E
F
A

A
A

A
A
E

E
D
D

D
D

D
Non-Auto-Operation Auto-Operation Auto-Alternate Operation Non-Auto-Operation Auto-Operation Auto-Alternate Operation

Unit:mm Unit:mm

Auto-Connecting Type Free Standing Type

Connection Output Connection Output
Pump Model A B C D E F Pump Model A B C D E F
Part No. （kW） Part No. （kW）

0.15 395 436 144 0.15 380 206 144

150 330
CR501S／T 0.25 CR501S／T 0.25 394
P50RL 165 345 F50
0.4 409 470 175 0.4 240 175
CR ー CR 398 155 335 ー
CR501 0.75 CR501 0.75
Non-Auto-Operation

CR65 P65NR／80NR 1.5 536 470 CR65 1.5 517 450

621 203 200 F65N／80N 295 203 180
CR80 P65NR／80NR 2.2 561 490 CR80 2.2 542 470
CRS321S P32RL 395 436 144 0.1 105
0.15 ※1 CRS321S F32 352 206 144
（409）
（470）
（175）
CRS401S／T P40RL 0.15※1（366）
（240）
（175） 305
125
0.25 165 345 CRS401S／T F40
0.25 366
CRS CRS501S／T 0.4 409 470 175 ー CRS ー
P50RL CRS501S／T 0.4 240 175
CRS501 0.75 F50 379 135 315
CRS501 0.75
CRS65 P50NR／65NR／80NR 1.5 536 470 CRS65 F50N／65N／80N 1.5 485 420
621 203 200 295 203 150
CRS80 P65NR／80NR 2.2 561 490 CRS80 F65N／80N 2.2 510 440
CRC40S／T P40RH 0.4 417 360 CRC40S／T F40 0.4 389 330
452 177 160 245 177 130
P50RH 0.75 436 380 F50 0.75 408 350
CRC CRC50 ー CRC CRC50 ー
P50NR／65NR 1.5 536 470 F50N／65N 1.5 485 420
621 203 200 295 203 150
CRC65 P65NR／80NR 2.2 561 490 CRC65 F65N／80N 2.2 510 440
0.15 395 436 171 0.15 380 206 171 510
150
CR501DS／T 0.25 CR501DS／T 0.25 394 515
CR-D P50RL 165 530 ー CR-D F50 ー
0.4 409 470 202 0.4 240 202
398 155 520
CR501D 0.75 CR501D 0.75
0.1 105
Auto-Operation

CRS321DS P32RL 395 436 171

0.15※1 CRS321DS F32 352 206 171
（409）（470）
（202） 480
CRS401DS／T P40RL 0.15※1（366）
（240）
（202）
125
0.25 165 530 CRS401DS／T F40
0.25 366 490
CRS-D CRS501DS／T 0.4 409 470 202 ー CRS-D ー
P50RL CRS501DS／T 0.4 240 202
CRS501D 0.75 F50 379 135 500
CRS501D 0.75
CRS65D P50NR／65NR／80NR 1.5 536 765 CRS65D F50N／65N／80N 1.5 485 715
621 203 205 300 203 155
CRS80D P65NR／80NR 2.2 561 790 CRS80D F65N／80N 2.2 510 740
CRC40DS／T P40RH 0.4 417 CRC40DS／T F40 0.4 389
452 195 170 570 245 195 140 540
P50RH 0.75 436 F50 0.75 408
CRC-D CRC50D ー CRC-D CRC50D ー
P50NR／65NR 1.5 536 765 F50N／65N 1.5 485 715
621 203 205 300 203 155
CRC65D P65NR／80NR 2.2 561 790 CRC65D F65N／80N 2.2 510 740
0.15 395 436 171 0.15 380 206 171 460 590
185
CR-W CR501WS P50RL 0.25 200 480 610 CR-W CR501WS F50 0.25 394 465 595
Auto-Alternate Operation

409 470 202 240 202

0.4 0.4 398 190 470 600
CRS321WS P32RL 395 436 171 0.1 140
0.15※1 CRS321WS F32 352 206 171
（409）（470）
（202）200 480 610 430 560
CRS401WS／T P40RL 0.15※1（366）
（240）
（202）
160
0.25 CRS401WS／T F40
0.25 366 440 570
CRS-W CRS501WS／T 0.4 409 470 202 CRS-W
P50RL 200 480 610 CRS501WS／T 0.4 240 202
CRS501W 0.75 F50 379 170 450 580
CRS501W 0.75
CRS65W P50NR／65NR／80NR 1.5 536 695 775 CRS65W F50N／65N／80N 1.5 485 645 725
621 203 240 300 203 190
CRS80W P65NR／80NR 2.2 561 720 800 CRS80W F65N／80N 2.2 510 670 750
CRC50W P50NR／65NR 1.5 536 695 775 CRC50W F50N／65N 1.5 485 645 725
CRC-W 621 203 240 CRC-W 300 203 190
CRC65W P65NR／80NR 2.2 561 720 800 CRC65W F65N／80N 2.2 510 670 750

※1（ ）：CRS401S 1Phase - 200V or Over

CRS401T 3Phase - 380V or Over 7
 Special Accessories
Liquid Level Regulators - All models are non-mercury structure for earth environment.

LC “Level Switch” MS “Mini Switch” FV “Oval Float”

■Features

LC Useful for drinking water, waste water and sewage containing the suspended solids.
Hardly affected by corrosion or rust even if it is immersed in a corrosive liquid for a long time.

MS Useful for waste water and sewage containing a few suspended solids.
The MS is available in two types, MS11 (single float) and MS21 (double float).

FV Useful for the fresh water as well as waste water not containing suspended solids.
A single FV is able to control both the upper and lower liquid levels.

■Specifications
Model LC12 MS11, MS21 FV11
Switch Micro Switch Lead Switch Lead Switch
Specific gravity of liquid 0.95~1.15 0.95~1.10 0.95~1.10
Liquid Temp 0~60˚C 0~40˚C 0~60˚C
Voltage AC/DC30V or under
Current 5A or under 0.5A or under 0.6A
Cable Length 6m, 13m, 20m, 30m, 40m, 50m (further cable extension at interval of 10m)
Cable Type 0.75mm2×3 cores, Flat Type 0.2mm2×2 cores×φ4.7mm 0.5mm2×2 cores×φ5.8mm
Weight (including cable) 1.2kg (6m cable) 0.6kg (MS11, 6m cable) 1.0kg (6m cable)
Case Polypropylene resin ABS resin Polypropylene resin
Material Cable VCTFK PVC resin (soft type) PVC resin (soft type)
Others Chain: SUS304 Sinker: Cast iron with PVC resin coating Sinker: Cast iron

Specifications and dimensions are subject to change without notice.

ShinMaywa Industries, Ltd.

International Business Group 3-2-43, Shitte, Tsurumi-ku, Yokohama, 230-0003, Japan
Sales & Marketing Dept., Fluid Div. Phone : +81-45-584-1322 Fax : +81-45-575-2286
E-mail : sales.eisui @shinmaywa.co.jp

ShinMaywa (America), Ltd. ShinMaywa (Asia) Pte. Ltd.

10737 Gateway West, Suite 240, 8 Burn Road, #14-10 Trivex,
El Paso, Texas 79935, U.S.A. Singapore 369977
Phone : +1-915-594-9862 Phone : +65-6224-0728
Fax : +1-915-594-9866 Fax : +65-6224-9678
E-mail : info@shinmaywaamerica.com E-mail : asia.ad@shinmaywa.com.sg

ShinMaywa (Shanghai) Trading Co., Ltd.

201107 Building 6, Lane 333, Zhujian Road,
Minhang District, Shanghai, China
Phone : +86-21-5296-2966
Fax : +86-21-5296-2970
E-mail : shanghai@shinmaywa.co.jp
, Printed on recycled paper.
http://www.shinmaywa.co.jp/english/products/pump.htm 15. 3 Z-E115J Printed in Japan1.9