1100 Series 1104D-44T Industrial

74.5 kW / 99.9 hp @ 2200 rpm

With the success of their 1100 Series, single platform engines, Perkins have
taken development further with the introduction of the 1100D range to the
Series.

The 1100D range is the ultimate power solution. With its wide choice of build
options, plus all the features and benefits, it presents a secure future for all
our customers at Tier 3/Stage IIIA emissions legislation; and is the platform on
which the long-term solution to Tier 4/Stage IIIB legislation will be built.

Emissions
Meets U.S. EPA Tier 3 and European EU Stage IIIA emissions requirements.

Specification
Number of cylinders 4 vertical in-line
Bore and stroke 105 x 127 mm 4.3 x 5.0 in
Displacement 4.41 litres 269 in3
Aspiration Turbocharged
Cycle 4 stroke
Combustion system Direct injection
Compression ratio 16.2:1
Rotation Anti-clockwise, viewed on flywheel
Total lubricating capacity up to 11 litres* 3.0 US gal
Cooling system Liquid
Total coolant capacity 7 litres 1.9 US gal
* dependent on sump option and gradeability requirements

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1835/12/14 Produced in England ©2014 Perkins Engines Company Limited
1100 Series 1104D-44T Industrial
74.5 kW / 99.9 hp @ 2200 rpm

Features and benefits

Powered by your needs

l The 1100D range offers the possibility to move between different fuel system technologies and aspirations
l The 1104D mechanical range offers a class-leading choice of aspirations. This includes turbocharged and turbo
aftercooled models for use worldwide, with the addition of a naturally aspirated model for markets outside of the US

State of the art design

l Latest diesel technology development used in mechanical control system
l Minimised impact on heat rejection and fuel consumption

Component commonality
l Shared front and rear ends and ‘repeated’ components – pistons, con rods and valve gear
l Rationalised inventory, streamlined training and consistent serviceability

Reduced noise
l Noise minimised at source – engine sound levels have been reduced by up to 1 dBA
l Reduction in noise suppression costs

Lower installation costs

l Virtually identical hook-up points and envelope size as the 1104C model
l Customer enjoys a seamless transition during the emissions changeover process

Lower operating costs

l Service intervals are 500 hours standard
l Warranties and Service Contracts
We provide one-year warranties for constant speed engines and two-year warranties for variable speed models, as
standard. These are supported by multilevel Extended Service Contracts that can be bought additionally
Discover more: www.perkins.esc
l Low usage warranty package is also available

Product support
l Through an experienced network of distributors and dealers, fully trained engine experts deliver total service
support around the clock, 365 days a year. This global network uses a comprehensive suite of web based
tools covering technical information, parts identification and ordering systems, all dedicated to maximising the
productivity of your engine
l Throughout the entire life of a Perkins engine, we provide access to genuine OE specification parts giving 100%
reassurance that you receive the very best in terms of quality for lowest possible cost... wherever your Perkins
powered machine is operating in the world
l To find your local distributor: www.perkins.com/distributor

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1835/12/14 Produced in England ©2014 Perkins Engines Company Limited
1100 Series 1104D-44T Industrial
74.5 kW / 99.9 hp @ 2200 rpm

Technical information
l Engine ratings
l SAE A or SAE B PTO drive

l Timing case and gear driven auxiliaries

l Flywheel housings

l Flywheel and starter rings

l Oil filter positions

l Adapter plates

l Starter motors

l Fan drives and locations

l Lubricating oil filters and breathers

l Front-end drives

l Alternators

l Belt driven auxiliaries

l Induction manifolds

l Exhaust manifolds

l Fuel filter positions

l Cold start aids

l Engine mountings

l Cooling packs

l Air compressor

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1835/12/14 Produced in England ©2014 Perkins Engines Company Limited
1100 Series 1104D-44T Industrial
74.5 kW / 99.9 hp @ 2200 rpm

663 mm 597 mm

810 mm

Engine package weights and dimensions

Length 663 mm 26.1 in
Width 597 mm 23.5 in
Height 810 mm 31.9 in
Weight (dry) 306 kg 674.6 lb

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1835/12/14 Produced in England ©2014 Perkins Engines Company Limited
1100 Series 1104D-44T Industrial
74.5 kW / 99.9 hp @ 2200 rpm

392.0
400
x
390
380
370
360
Torque (Nm)

350
340
330
N
320
310 A
300 90
85
80
74.5 74.0
75
70
65
60

Power (kW)
55
50
45
40
35
30
25
20
15
800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

Engine Speed (rev/min)

Performance after 60 hours operation with fuel oil at 40˚C at pump inlet

Note: lower speed ratings cannot be read off this curve

Performance data Gross intermittent (ISO 14396) Speed rpm

Power output (kW)  74.5 2200
Power output (hp)  99.9 2200
Peak torque (Nm) 392.0 1400
Peak torque (lbf·ft) 289.1 1400
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1. Derating may
be required for conditions outside these; consult Perkins Engines Company Limited.

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1835/12/14 Produced in England ©2014 Perkins Engines Company Limited