Features

Transducers
General Industrial Transducer (Amplified) Series 423, 425, 426

General purpose, industrial grade transducer

Diffused silicon sensor for high accuracy and reliability
Rugged stainless steel enclosure
Superior surge voltage protection and EMI/RFI immunity
Built-in high pressure snubber (2000 psi and above)
Current and voltage signals

Applications
Oil pressure hydraulics
Cranes
Presses
Gas metering
Vacuum machinery packaging

General Specifications*
Accuracy (LH & R): ±0.25% BSL Pressure Connection: 1/4”-18 NPT male
Long Term Stability: ±0.5% FSO of calibration curve Response Time: 1 kHz (typ)
Typical Life Cycle: 100 million cycles Electrical 3 conductor for voltage series and 2
Proof Pressure: 2 times rated pressure or 13,000 psi max. Connection: conductor for current series, 24 awg, PVC
(884 bar), whichever is less jacketed, shielded cable, 3 ft. (1 m) long with
integral strain relief and case ground.
Input:
423: Excitation voltage: 9 to 30 VDC Temperature Ranges:
Operating: 0° to 160°F (-18° to 71)°C
426: Excitation voltage: 14 to 30 VDC
Compensated: 30° to 160°F (-1° to 71)°C
425: Excitation voltage: 12 to 32 VDC
Storage: -40° to 185°F (-40° to 85)°C
Supply Current: 15 mA maximum (no load)
Temperature Shift:
Min. Load Resistance: 2K ohms (voltage series only)
Zero & Span: 0.0125% per °F over compensated range,
Output: 75°F reference (±1% of FSO over temp.
423: Output: 0.5 to 5.5 VDC range)
Full scale output: 5.0 VDC ± 0.8%
Vibration: 15 g’s, 10-2000 Hz, MIL-STD 202
Zero output: 0.5 VDC ± 0.4%
Shock: 50 g’s, 11 ms, MIL-STD 202 Method 213,
426: Output: 1 to 11 VDC
Cond. G.
Full scale output: 10 VDC ± 0.4%
Zero output: 1.0 VDC ± 0.2% Built-in Protection: Conducted & radiated RF emissions/
interference to EN 55011
425: Output: 4 to 20 mA
Full scale output: 16 mA ± 0.4% IEC 801-2, -3, -4, -5, and -6
Zero output: 4 mA ± 0.2%
EN/IEC 6100-4-2, -3, -4, -5, -6
Wetted Parts: 17-4 PH & 300 series stainless steel
Enclosure: NEMA 4, 300 series stainless steel Refer to engineering drawing for details.
* See product configurator for additional options.
Weight:
423 & 426: 7.4 oz. (221 grams) to 1000 psi
9.9 oz. (281 grams) 2,000 psi and higher
Wiring Code
423, 425 & 426 425: 7.4 oz. (210 grams) to 1000 psi
T5/H5/T4/H4 T2 H3 9.4 oz. (266 grams) 2,000 psi and higher
1 A Red + Excitation
3 B Black + Output Warranty: 3 year warranty
2 C Green Common
4 D White Case Ground
- - Bare Shield

1
General Industrial Transducer (Amplified) Series 423, 425, 426
Technical Drawings

Standard and Optional Electrical Connections

1-1/8

CABLE
CONNECTOR
(H5)

2-7/16

STANDARD DIN
CONNECTOR
(T5)

Product Configurator Example 425 H3 -19 P1

Base Model Options

423 0.5 - 5.5 VDC analog output
Pressure Range Nema 4X enclosure
425 4 - 20 mA analog output -N4X
-23 0 - 29.9” of Hg (H3 Option only)
426 1 - 11 VDC analog output -25 0 - 5 psi (0 - 0.35 bar) -E External zero span adjustment

-01 0 - 15 psi (0 - 1 bar)4 -Z15 Calibrated in bars

Electrical Connection 4 1 to 5V output (available only on
-21 0 - 30 psi (0 - 2 bar)
-Z10
Shielded & jacketed #22 AWB cable (1 -03 0 - 50 psi (0 - 3.5 bar)4 423 models)
H3
meter) (standard)
-22 0 - 60 psi (0 - 4 bar)4 1 to 6V output (available only on
-Z11
Subminature DIN connector (43650 423 models)
H4 -04 0 - 100 psi (0 - 6.9 bar)4
type) - mating connector included
0.5 to 4.5V output (available
Shielded & jacketed cable with 1/2” -05 0 - 150 psi (0 - 10.3 bar)4 -Z12
H5 only on 423 models)
male conduit
-06 0 - 200 psi (0 - 12.8 bar)4
2 to 10V output (available only
T21 Bendix connector (PT02A-8-4P) - 4 pin -Z16
-07 0 - 300 psi (0 - 20.7 bar)4 on 426 models)
M12 Hirschman connector (ELST 412
T42 -08 0 - 500 psi (0 - 34.5 bar) Additional length of free leads
PG9)
-WXXX
-19 0 - 600 psi (0 -41 bar) (H3/H5 connection)
Standard DIN connector (43650) -
T5
mating connector included -10 0 - 1,000 psi (0 - 69 bar) Special pressure ranges
-ZXXY
-11 0 - 1,500 psi (0 - 104 bar) (see note 3)

Accessories -12 0 - 2,000 psi (0 - 138 bar)5

Order # Description -13 0 - 3,000 psi (0 - 207 bar)5 Process Connection

Bendix mating connector -14 0 - 4,000 psi (0 - 276 bar)5 Blank 1/4-18 NPT male (standard)
23969
(T2 electrical option) -15 0 - 5,000 psi (0 - 345 bar)5 -P1 7/16-20 UNF-2B female
Hirschman mating connector -16 0 - 6,000 psi (0 - 414 bar)5 -P3 7/16-20 UNF-2A male
239236
(T4 electrical option) -17 0 - 7,500 psi (0 - 517 bar)5
208360 Pressure snubber (1/4-18 NPT female/male) -18 0 - 10,000 psi (0 - 689 bar)5
1
Mating connector: Bendix # PT06E-8-4S or equivalent (not included). Order number: 23969
Blank Gauge pressure
2
Mating connector: Hirschman # ELWIKA 4021 PG7 or equivalent (not included). Order number: 239236 -A Absolute pressure range (<300psi)
3
Add suffix ZXXY for special pressure ranges. XX = significant digits. Y = number of trailing zeros.
Example: for 230psi callibration, add Z231
4
Available in absolute ranges
5
Built-in surge protector

3211 Fruitland Avenue • Los Angeles, CA 90058 •  800-835-1060 • Fax: 323-589-3463 • www.barksdale.com
See Barksdale’s Standard Conditions of Sale • Specifications are subject to modification at any time • Bulletin #R0032-B • 09/07 • ©2007 • Printed in the U.S.A. 2