10 Mul-eocs400-T-wr Spec V1a

MUL-EOCS400-T-WR Specification v1a
Multicom Indoor EOC Slave with 4*FE, CATV/R, & WiFi
Multicom MUL-EOCS400-T-WR is a EOC slave based on the HomePlug AV solution for Ethernet access over coax.
It works together with a EOC master which is also based on the HomePlug AV solution to create a two-layer
Ethernet data transmission channel on CATV coax cable, and to provide Ethernet access service using the existing
coax cable networking at the subscriber.
The MUL-EOCS400-T-WR is a EOC slave equipped with 4 Ethernet ports, 1 CATV output, and WiFi.
The MUL-EOCS400-T-WR design is based on the USA Qualcomm chipset solution,with the high anti-jamming
capabilities of OFDM technology. The 5-42MHz low frequency band is used for EOC signals. With the built-in high
isolation filter for the CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run over
the same single cable without interference. The PHY Layer speed is 600Mbps, and the MAC Layer throughput is up
to 320Mpbs.
Features:
 Based on the HomePlug AV solution and Qualcomm chipset

 Qualcomm Chipset: provides USA innovation, power, performance!
 5-42Mhz frequency for EOC signals., no interference wwith CATV Service
 PHY Layer speed 600Mbps
 Supports data encryption
 4 * 100M auto-negotiation Ethernet ports
 Supports the isolation of slave under one master
 Supports port-based VLAN and 802.1q VLAN
 Supports bandwidth limits
 Supports QOS configurations based on slave port or VLAN.
 Supports broadcast storm prevention
 Automatically distributes configurations to newly connected slaves, available to use as soon as
correctly connected and powered on.
 Supports WEB,CLI and SNMP management
1
www.multicominc.com (800) 423-2594
All Rights Reserved © 2018 Multicom, Inc. (407) 331-7779
EOC Specification
Item Parameters Specification

1*TV(RF signal) OUTPUT, F connector
RF interface
1*CABLE(MIX) INPUT, F connector
Ethernet
4*10/100M auto-negotiation, RJ45
interfaces
Power
Interface & 1*DC12V power supply interface
interface
LED indicators
1 x power indicator
1 x system indicator
LED indicators 1 x CABLE indicator
1 x WiFi indicator
LAN indicators (each Ethernet port has 1 indicator)
Frequency: 5-42MHz
Output level: 110±5dBuv
RF parameters Receiver sensibility: 45dBuv
Return loss:>15dB
Output impedance: 75Ω
Performance
PHY Layer:600Mbps
parameters Transmission
Throughput on MAC Layer:320Mbps
OFDM– 2690-carriers
Modulation Mode
4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO
Working Mode TDMA/CSMA
Encryption Mode AES-128
IEEE P1901(Draft)
EOC Standard
HomePlug AV
Standard
IEEE 802.3, IEEE 802.3x, IEEE 802.3u
Ethernet Standard
IEEE802.1P, IEEE802.1Q
Network
WEB, CLI, SNMP
Software Management
Software Features VLAN, QOS, Bandwidth Control, Broadcast storm prevention
Power supply & Power adapter:12VDC1A

Consumption Power consumption <8W
Dimensions 160×120×32mm
Physical Weight 0.5kg
Features Work temperature：0～50℃
Environment Stock temperature：-40～85℃
Attribute Work humidity：10%～90%, non-condensation
Stock humidity：10%～90%, non-condensation
2
WiFi Specification
Operating Modes Router or bridge
IEEE 802.11b: 11Mbps
Throughput IEEE 802.11g: 54 Mbps
IEEE 802.11n: 135Mbps
Frequency 2.412 ~ 2.472 GHz
13*Channel, configurable to meet the standard of USA, Canada,
Channel
Japan and China
Modulation DSSS , CCK and OFDM
Coding BPSK, QPSK, 16QAM and 64QAM
802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps;
-78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps
Performance
802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps;
Parameters
-79dBm @ 12 Mbps; -77dBm @ 18 Mbps;
RF receiver sensitivity
-74dBm @ 24 Mbps; -70dBm @ 36 Mbps;
-66dBm @ 48 Mbps; -65dBm @ 54 Mbps
802.11n: -65dBm @ 65 MbpsHT40;
-61dBm @ 135 MbpsHT40;
802.11b: 16.5 ±1dBm
802.11g: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps;
RF output level 15 ± 1dBm @ 6 ~ 36 Mbps
802.11n: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps;
15 ± 1dBm @ 6 ~ 36 Mbps
Encryption Mode 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK)
Typical Applications
 CATV

 Internet Access

 VOD

 IPTV

 Camera monitor systems
3

10 Mul-eocs400-T-wr Spec V1a

Uploaded by

Copyright:

Available Formats

10 Mul-eocs400-T-wr Spec V1a

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

10 Mul-eocs400-T-wr Spec V1a

Uploaded by

Copyright:

Available Formats

MUL-EOCS400-T-WR Specification v1a

Multicom Indoor EOC Slave with 4*FE, CATV/R, & WiFi

 Based on the HomePlug AV solution and Qualcomm chipset

Item Parameters Specification

Software Features VLAN, QOS, Bandwidth Control, Broadcast storm prevention

Power supply & Power adapter:12VDC1A

You might also like