TILT COUPLER for excavators up to 32 tonne* *enquire for larger models
with
from
and Multi-Model™ 120o TILT 180o TILT
for ALL excavators 10T and above up to 9.0T
The world’s only dual-
INSTANT Automatically secures the attachment locking coupler that offers TOTAL SAFETY in
LESS THAN INTELLIGENT I-Lock Control System – ICS A SECOND! INNOVATIVE See it in action; Evolving technology – Refining simplicity Patents apply. For details, see our website.
Wedgelock Equipment Limited • 72 Montgomery Crescent, Upper Hutt 5018, NEW ZEALAND NZ 0800 424 482 • AUS 1800 731 757 • info@wedgelock.com • www.wedgelock.com I-LOCK ® by
CT2 Tilt Coupler Range
for excavators up to 32 tonne* * For larger excavator models please enquire
930-000-4 R-1 210 18.0-21.0T CT2-210 550 430 / 485 300 80 8000 120 270 22.0-27.0T CM2-270-090 640 460 / 520 325 90 12000 120 320 28.0-32.0T CM2-320 860 485 / 585 344 80 / 90 / 100 12000 120 *I-Lock Tilt Coupler models from 028 to 320 are designed with multi-model capability. This will enable the operator to connect to an array of attachments in the same weight class. Compatibility is subject to attachment design and specification. For further information please refer to C2 specification sheets 900-* or contact your nearest Wedgelock Dealer. Complies with the following standards/position papers: AS4772-2008, EN474, NSW WorkCover Position Paper for Quick Hitches, NZ WorkSafe Best Practices 5.10.3 Specifications are subject to change without notice. All images used are representative only and may differ from actual product.
The CM2 I-Lock Tilt Coupler delivers maximum safety without compromise:
Enables operators to connect
to an array of attachments The rear pin is locked in place by the within the same weight class. primary wedge, ensuring that both attachment pins are secure.
Incorporates world–renowned POWERTILT from HELAC for enhanced Automatically secures the precision and reliability. attachment to the coupler the instant the front jaw comes into contact with the first pin. This extremely important safety feature is unique to The ICS (I-Lock Control System) delivers all I-Lock couplers. functionality via two hydraulic lines.
Variable tones deliver clear signals during Safety Knuckle automatically resets to Check valve ensures primary wedge retains detach/attach. Safe Mode. pressure in the event of interruption of supply.
