FDPC PDF

PRODUCT CATALOG 2015 – 2016
INTRODUCTION
THE POWER OF ONE
All over the world, the engineering community turns to Fenner Drives

for value-adding, problem solving products for conveying and
power transmission applications. Our quality-driven teams design,
manufacture and distribute a broad range of sophisticated, reliable
components. Fenner Drives has over 100 years of manufacturing,
technical and commercial expertise; ISO 9001 certified production
facilities in Manheim and Lancaster, PA and Wilmington, NC;
warehouse facilities in Lancaster, PA, Wilmington, NC, and
Dewsbury, UK; and a global sales team with a presence on six
continents.
Fenner Drives is a division of Fenner PLC. With over 5,500 employees

worldwide, Fenner PLC is a leading global provider of local,
engineered solutions for performance critical applications.
www.fennerdrives.com • US and Canada 1 800 243 3374 • Latin America (except Brazil) 1 717 665 2421 • Europe, Asia, Australia, Africa and Brazil +44 0 870 757 7007
CONVEYING SOLUTIONS. . . . . . . . . . . . . . . . . . . . . . . 5
TABLE OF CONTENTS
Belting Selection – Round and V Belting . . . . . . . . . . .6 – 7
Eagle O-Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fabricated Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Round Belting & Products . . . . . . . . . . . . . . . . . . . . . 8 – 16
V Belting & Products . . . . . . . . . . . . . . . . . . . . . . . . 17 – 22
Flat Belting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Eagle Endurance Taper Edge Bands . . . . . . . . . . . . . . . . . 23
Eagle Welding Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Trackstar Guide, Channel & Rails . . . . . . . . . . . . . . . . . . . 25
Chain Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . 26 – 28
T-Max Tensioner/Sprocket Assemblies . . . . . . . . . . . . . . . 28
T-Max Chain Tensioners . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Engineering Data – Conveying Products . . . . . . . . 30 – 34
Material Properties – Conveying Products . . . . . . . 35 – 36
POWER TRANSMISSION SOLUTIONS . . . . . . . . . . . 37

V Belting & Wedge Belting . . . . . . . . . . . . . . . . . . . . . . . . 38
T-Max Belt & Chain Tensioners . . . . . . . . . . . . . . . 38 – 40
Material Properties – Power Transmission Products . . . . 41
Keyless Locking Devices Selection Assistance. . . . . 42 – 43
Trantorque Keyless Bushings. . . . . . . . . . . . . . . . . . 44 – 52
B-LOC Keyless Locking Devices . . . . . . . . . . . . . . . 53 – 66
Keyless Locking Device Application Examples . . . . . . . . . 67
Engineering Data – Keyless Locking Devices . . . . . 68 – 71
B-LOC Compression Hubs . . . . . . . . . . . . . . . . . . . 72 – 75
Engineering Data – B-LOC Compression Hubs. . . . . . . . 76
B-LOC Shrink Discs . . . . . . . . . . . . . . . . . . . . . . . . . 77 – 78
B-LOC Split and Half Shrink Discs . . . . . . . . . . . . . 79 – 83
B-LOC Single Taper Shrink Discs . . . . . . . . . . . . . . 84 – 85
Engineering Data – B-LOC Shrink Discs . . . . . . . . . . . . . 86
B-LOC WK Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . 87
Engineering Data – B-LOC WK Rigid Couplings. . 88 – 89
POWERMAX PULLEYS & IDLERS . . . . . . . . . . . . . . . 90

PowerMax Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . 91 – 92
PowerMax Carriage Rollers, Mounting Adapters, Pulleys . . 93
Engineering Data – Pulleys & Idlers . . . . . . . . . . . . . . . . . 94
Material Properties – Pulleys & Idlers . . . . . . . . . . . . . . . . 94
3
CONVEYING
4 www.fennerdrives.com • US and Canada 1 800 243 3374 • Latin America (except Brazil) 1 717 665 2421 • Europe, Asia, Australia, Africa and Brazil +44 0 870 757 7007
CONVEYING SOLUTIONS
Tango and PowerTwist Specialty Link Belts

• Install in minutes without dismantling conveyor components.
• Unaffected by extremes of temperature, water, oils, grease and

common solvents.
• Whether your application requires reduced contact surface, high

grip, abrasion resistance, non-marking, high temperature, oil,
and chemical resistance, there’s a Fenner Drives link belt to meet
your need.
Eagle Polyurethane Belting

• Comprehensive range of high quality non-reinforced and
reinforced belting in round and V profiles. Also available with
special top surfaces.
CONVEYING
• Over 400 FDA compliant products.
• Custom design capabilities: special profiles, dual durometer, static

dissipative, UV stabilized, tracking features, ridged profiles.
Trackstar UHMW Belt & Chain Guides

• Fight friction and reduce costs with long-wearing UHMW belt
and chain guides.
• Wide range of standard profiles for use in guiding belts, chain

and cables.
• Available from stock with same-day shipping.
• Two-piece guide and channel design simplifies installation and

replacement.
T-Max Belt and Chain Tensioners

T-Max spring loaded tensioners automatically take up the slack –
decreasing downtime, reducing operating costs and saving energy.
• Constructed from high-quality materials for proven durability in

harsh environments.
• Wide range of tensioners to handle single and multiple strand

belt and chain drives.
www.fennerdrives.com • US and Canada 1 800 243 3374 • Latin America (except Brazil) 1 717 665 2421 • Europe, Asia, Australia, Africa and Brazil +44 0 870 757 7007 5
BELTING SELECTION
ROUND BELTING
6"
6"
6"
2"
"
"
"
"
"
"
1/2
5/1
3/4
3/1
9/1
3/8
1/4
3/3
5/8
1/8
m
m
m
m
m
m
m
m
m
m
m
m
m
3m
4m
m
m
m
m
5m
m
m
m
m
m
m
m
m
.7
6m
2m
7m
3m
8m
4m
5m
9m
10
16
20
13
12
18
14
12
19
15
6.
2.
9.
Tango™ Link Belting
*
Eagle Blue® 80 EC
*
Eagle Clear 80 EC
*
Eagle Blue 80 MD
Eagle Opaque 80
*
Eagle Blue 85
*
Eagle Clear 85
Non-Reinforced Belting
*
Eagle Orange 85
*
Eagle Red 85
Eagle Green 89
Eagle Green 89 T
Eagle Red 90
*
Eagle Beige 95
*
Eagle Clear 95
CONVEYING
Eagle White 40D

Eagle Blue 55D
*
Eagle Blue 80 EC QC
*
Eagle Blue 85 QC
*
Eagle Clear 85 QC
Eagle Red 85 QC
*
Eagle Yellow 85 QC
Eagle Clear 85 TOR
*
Eagle Orange 85 R
Reinforced
*
Eagle Hyfen 85 R
Eagle Green 89 R
Eagle Green 89 RT
*
Eagle Beige 95 R
†
Eagle Can Cable
Eagle Fabricated Belts
Abbreviation Key
CXF Co-extruded Flat * These belts are FDA compliant (unless cogged).
† Can Cable available in Red 50D LCF, Blue 55D, Blue 55D Aramid,
CXR Co-extruded Ribbed
Natural 55D, Green 63D, and Natural 63D.
EC Regulation (EC) 1935/2004 ‡ Eagle Ivory 85 SGT and RSGT available with PVC, PU or TPE top surface.
LCF Low Coefficient of Friction

MD Metal Detectable
• Some diameters and cross sections may be subject to minimum orders.
PU PolyUrethane Dimensions are for reference only.
• Flat belting available in Eagle Orange 85. Additional cross sections, colors, and
PVC PolyVinyl Chloride durometers are available.
QC Quick-Connect • Contact Applications Engineering at AE@fennerdrives.com for design assistance.
R Reinforced
RCS Reduced Contact Surface
RSGT Reinforced SuperGrip Top
RT Reinforced Textured
SGT SuperGrip Top
T Textured
TOR Twisted O-Rings
TPE ThermoPlastic Elastomer
BELTING SELECTION
V BELTING
op
op
p
To
-T
-T
p
op
op
op
T-
To
p
ge
ge
T
-T
To
m
m
ed
ed
ed
-T
m
e-
e-
id
id
ge
5m
4m
4m
n-
ng
dg
bb
dg
-R
bb
bb
-R
p
d
ow
in
i
To
Lo
Hi
Ri
Ri
Ri
Ri
Ri
Ri
×
W
×
×
Tw
i
Cr
mm
Tw
T-
m
m
13
13
17
32
13
17
32
13
17
22
10
22
17
22
8m
6m
BB
AA
3L
3L
3L
3L
10
A/
A/
B/
D/
A/
B/
D/
A/
B/
C/
Z/
C/
B/
C/
A
Tango™ Link Belting
PowerTwist® Antistatic
Link Belting
PowerTwist Bridge Top™
PowerTwist SuperGrip Top PU
PowerTwist SuperGrip Top PVC
PowerTwist RCS
PowerTwist Friction Top®
PowerTwist Roller Drive™

*
Eagle® Blue 80 EC
*
Eagle Clear 80 EC
*
Eagle Blue 80 MD
Eagle Opaque 80
*
Eagle Blue 85
*
Eagle Clear 85
Non-Reinforced Belting
CONVEYING
Eagle Ivory 85
*
Eagle Orange 85
*
Eagle Red 85
Eagle Green 89
Eagle Red 90
*
Eagle Beige 95
*
Eagle Clear 95
Eagle White 40D
Eagle Blue 55D
Eagle Red 85 CXF
Eagle Ivory 85 SGT*
Eagle Green 89 SGT PVC
Eagle Red 90 SGT PVC
Eagle White 40D SGT PVC
Eagle Opaque 80 R
Reinforced Belting
*
Eagle Orange 85 R
*
Eagle Hyfen 85 R
Eagle Ivory 85 R
Eagle Green 89 R
*
Eagle Beige 95 R
*
Eagle Hyfen 95 R
Eagle Hyfen 85 CXF/CXR

‡
Eagle Ivory 85 RSGT
Eagle Fabricated Belts
ROUND BELTING FOR CONVEYING
Eagle® O-Rings
• O-Rings for line shaft, live roller and motion transfer conveyors.
• High coefficient of friction.
• Elastic with excellent memory.
• Popular 1/8", 3/16", 1/4", 5mm and 6mm sizes in stock.
• Contact Fenner Drives for part numbers.
Twisted O-Rings
• Twisted O-Rings are an ideal fast fit TWISTED O-RINGS
solution for live roller conveyors. Material and Part

Color Number Dimensions
• Twisted loop construction packaged with 5050003 3/16" × 6"

5050011 3/16" × 10"
metal hooks. Plastic hooks also available. 5050015 3/16" × 10-1/2"
5050012 3/16" × 11"
• No need to dismantle drive components. 5050911 3/16" × 11-1/2"
5050016 3/16" × 12"
5050005 3/16" × 12-1/2"
Eagle Fabricated Belts Eagle Clear 85 5050002 3/16" × 12-3/4"

5050006 3/16" × 12-7/8"
Let us do the work for you and take the hassle 5050007 3/16" × 13"
CONVEYING
5050017 3/16" × 13-1/4"

out of fabricating your own endless belts.
5050009 3/16" × 13-1/2"
Eagle Twisted O-Rings easily installed without dismantling
5050014 3/16" × 13-3/4"
• Available in all Eagle Belting colors 5050008 3/16" × 14"
line shaft.
50 pieces per box, packaged with metal hooks. Plastic hooks
and durometers (except Can Cable). 5050010 3/16" × 14-1/2" also available.
• Rapid order turnaround.
2mm, 3/32", 3mm, 1/8" Round Cross Sections

Round Belting
NON-REINFORCED Working Load @ Percent Tension Weight
Part Dimensions Ø Minimum Pulley Ø 4% 6% 8% 10%
Material and Color Number (in) (mm) (in) (mm) (lbs) (N) (lbs) (N) (lbs) (N) (lbs) (N) lbs/ft kg/m
Eagle Blue 80 EC 4928000 2 0.55 14 0.1 0.7 0.2 1 0.3 1.4 0.4 1.7 0.002 0.004
Eagle Clear 80 EC 4927000 2 0.55 14 0.1 0.7 0.2 1 0.3 1.4 0.4 1.7 0.002 0.004
Eagle Opaque 80 L04OP802M 2 0.55 14 0.2 0.9 0.4 1.6 0.5 2.2 0.6 2.7 0.003 0.004
Eagle Orange 85 L04OG852M 2 0.63 16 0.2 0.9 0.3 1.3 0.4 1.8 0.5 2.2 0.003 0.004
Eagle Clear 85 L04C852M 2 0.63 16 0.2 0.9 0.3 1.3 0.4 1.8 0.5 2.2 0.003 0.004
Eagle Green 89 4905402 2 0.71 18 0.3 1.4 0.5 2.4 0.7 3.2 0.9 4 0.003 0.004
Eagle Green 89 Textured 4905302 2 0.71 18 0.2 1 0.4 1.7 0.5 2.3 0.7 2.9 0.003 0.004
Eagle Red 90 4940017 2 0.79 20 1.1 4.7 1.5 6.8 1.9 8.5 2.2 10 0.003 0.004
Eagle Orange 85 1032003 3/32 0.75 19 0.3 1.2 0.4 1.9 0.6 2.5 0.7 3.1 0.004 0.005
Eagle Clear 85 4908003 3/32 0.75 19 0.3 1.2 0.4 1.9 0.6 2.5 0.7 3.1 0.004 0.005
Eagle Clear 95 4907003 3/32 0.94 24 0.5 2.3 0.8 3.4 1 4.3 1.2 5.1 0.004 0.005
Eagle Orange 85 1032004 1/8 1 25 0.5 2.2 0.7 3.3 1 4.4 1.2 5.5 0.006 0.01
Eagle Clear 85 4908006 1/8 1 25 0.5 2.2 0.7 3.3 1 4.4 1.2 5.5 0.006 0.01
Eagle Clear 95 4907006 1/8 1.25 32 0.9 4 1.3 6 1.7 7.7 2.1 9.1 0.007 0.01
Eagle Blue 80 EC 4928001 3 0.83 21 0.4 1.7 0.6 2.5 0.8 3.5 1 4.3 0.005 0.008
Eagle Clear 80 EC 4927001 3 0.83 21 0.4 1.7 0.6 2.5 0.8 3.5 1 4.3 0.005 0.008
Eagle Orange 85 L04OG853M 3 0.94 24 0.4 1.9 0.7 3 0.9 4 1.1 4.9 0.006 0.009
Eagle Clear 85 L04C853M 3 0.94 24 0.4 1.9 0.7 3 0.9 4 1.1 4.9 0.006 0.009
Eagle Blue 85 L04BL853M 3 0.94 24 0.4 1.9 0.7 3 0.9 4 1.1 4.9 0.006 0.009
Eagle Green 89 L04G893MS 3 1.06 27 0.7 3.2 1.2 5.2 1.6 7.2 2 9 0.006 0.009
Eagle Green 89 Textured 4905303 3 1.06 27 0.5 2.3 0.9 3.8 1.2 5.2 1.5 6.5 0.006 0.009
Eagle Red 90 4940020 3 1.18 30 2.4 10.5 3.4 15.1 4.3 19 5 22.2 0.006 0.009
Eagle White 40D L04BY403M 3 1.42 36 1.9 8.3 2.9 12.8 3.8 16.8 4.5 20.2 0.006 0.008
Dimensions are for reference only.
4mm, 5mm, 3/16" Round Cross Sections
Round Belting

Eagle® Blue 80 EC 4928002 4 1.1 28 0.6 2.8 0.9 4.2 1.3 5.6 1.5 6.7 0.009 0.014
Eagle Clear 80 EC 4927002 4 1.1 28 0.6 2.8 0.9 4.2 1.3 5.6 1.5 6.7 0.009 0.014
Eagle Opaque 80 L04OP804 4 1.1 28 0.8 3.7 1.4 6.2 2 8.7 2.5 11 0.01 0.015
Eagle Orange 85 L04OG854 4 1.26 32 0.8 3.4 1.2 5.3 1.6 7 1.9 8.6 0.01 0.015
Eagle Clear 85 L04C854 4 1.26 32 0.8 3.4 1.2 5.3 1.6 7 1.9 8.6 0.01 0.015
Eagle Red 85 L04R8504 4 1.26 32 0.8 3.4 1.2 5.3 1.6 7 2 8.7 0.01 0.015
Eagle Blue 85 L04BL854 4 1.26 32 0.8 3.4 1.2 5.3 1.6 7 2 8.7 0.01 0.015
Eagle Green 89 4905404 4 1.42 36 1.3 5.7 2.1 9.3 2.9 12.8 3.6 16 0.01 0.015
Eagle Red 90 4940021 4 1.57 40 4.2 18.6 6 26.8 7.6 33.8 8.9 39.5 0.01 0.015
Eagle White 40D L04BY404 4 1.89 48 3.3 14.8 5.1 22.8 6.7 29.8 8.1 36 0.01 0.015
Eagle Blue 80 MD 4941100 3/16 1.31 33 0.8 3.5 1.2 5.4 1.6 7 1.9 8.6 0.013 0.02
Eagle Orange 85 1032006 3/16 1.5 38 1.1 4.9 1.7 7.5 2.2 10 2.8 12.3 0.014 0.021
Eagle Clear 85 4908009 3/16 1.5 38 1.1 4.9 1.7 7.5 2.2 10 2.8 12.3 0.014 0.021
Eagle Red 90 4940022 3/16 1.88 48 6 26.5 8.6 38.2 10.8 48.1 12.6 56.2 0.014 0.022
Eagle Clear 95 4907009 3/16 1.88 48 2 9.1 3 13.5 3.9 17.3 4.6 20.6 0.015 0.022
Eagle Clear 85 QC 4934009 .188 × .080* 1.5 38 0.5 2 0.7 3.1 0.9 4.2 1.2 5.2 0.012 0.018
Eagle Yellow 85 QC 4934021 .188 × .080* 1.5 38 0.5 2 0.7 3.1 0.9 4.2 1.2 5.2 0.012 0.018
Eagle Blue 80 EC 4928003 5 1.38 35 0.9 4.2 1.4 6.3 1.9 8.4 2.4 10.6 0.015 0.022
Eagle Clear 80 EC 4927003 5 1.38 35 0.9 4.2 1.4 6.3 1.9 8.4 2.4 10.6 0.015 0.022
CONVEYING
Eagle Orange 85 4940100 5 1.57 40 1.2 5.4 1.9 8.3 2.5 11 3.1 13.6 0.016 0.024
Eagle Clear 85 L04C855M 5 1.57 40 1.2 5.3 1.9 8.2 2.5 11 3 13.5 0.016 0.024
Eagle Red 85 L04R855 5 1.57 40 1.2 5.3 1.9 8.2 2.5 11 3 13.5 0.016 0.024
Eagle Blue 85 L04BL855M 5 1.57 40 1.2 5.3 1.9 8.2 2.5 11 3 13.5 0.016 0.024
Eagle Green 89 4905405 5 1.77 45 2 8.9 3.3 14.6 4.5 20.1 5.6 25.1 0.016 0.023
Eagle Red 90 L04R9005M 5 1.97 50 6 26.5 8.6 38.2 10.8 48.1 12.6 56.2 0.014 0.022
Eagle Beige 95 L04BE955M 5 1.97 50 5.3 23.6 7.5 33.4 9.4 41.8 11 48.8 0.016 0.024
Eagle White 40D L04BY405M 5 2.36 60 5.2 23.1 8 35.5 10.5 46.6 12.6 56.2 0.015 0.023
Eagle Blue 80 EC QC 4928020 5 × 2* 1.38 35 0.4 1.8 0.6 2.8 0.8 3.7 1 4.6 0.012 0.018
Eagle Clear 85 QC L04QC855M 5 × 2* 1.57 40 0.5 2.3 0.8 3.5 1.1 4.7 1.3 5.8 0.013 0.02
Eagle Red 85 QC L04QCR855M 5 × 2* 1.57 40 0.5 2.3 0.8 3.5 1.1 4.7 1.3 5.8 0.013 0.02
Eagle Blue 85 QC L04QB855M 5 × 2* 1.38 35 0.5 2.3 0.8 3.5 1.1 4.7 1.3 5.8 0.013 0.02
QC Connectors 4935009 25/pack
REINFORCED Working Load @ Percent Tension Weight

Eagle Hyfen 85 5218009 3/16 2.06 52 2.8 12.5 6.8 30.2 11.2 49.8 15.5 68.9 0.014 0.021
Eagle Green 89 L04G895MRS 5 1.97 50 1.7 7.4 5 22.2 10.2 45.4 15.7 70.1 0.016 0.023
Eagle Green 89 Textured 4940056 5 1.97 50 2.3 10.2 6.9 30.5 14 62.5 21.7 96.3 0.016 0.023
Trackstar® Round Belt Guides
Part Numbers
Galvanized Stainless Steel Aluminum Channel
Channel Channel Channel Type A B D H
Belt Guide w/ Mounting Channel GB1006-3G GB1006-3S GB1006-3A C3 0.59 0.79 0.8 0.13
Part Number A B H
Belt Guide NC1006 0.38 0.75 0.13
* QC dimensions are shown O.D x I.D. (O.D. is the outer diameter of the belt. I.D. is the inner diameter of the belt.)
6mm, 1/4" Round Cross Sections
Round Belting

Eagle® Blue 80 EC 4928004 6 1.65 42 1.3 5.9 2.1 9.1 2.8 12.3 3.4 15.2 0.021 0.032
Eagle Clear 80 EC 4927004 6 1.65 42 1.3 5.9 2.1 9.1 2.8 12.3 3.4 15.2 0.021 0.032
Eagle Opaque 80 L04OP806M 6 1.65 42 1.9 8.2 3.2 14 4.4 19.6 5.6 24.7 0.023 0.034
Eagle Clear 85 L04C856M 6 1.89 48 1.7 7.7 2.7 11.8 3.5 15.8 4.4 19.4 0.023 0.034
Eagle Blue 85 L04BL856M 6 1.89 48 1.7 7.7 2.7 11.9 3.6 15.8 4.4 19.5 0.023 0.034
Eagle Green 89 4905406 6 2.13 54 2.9 12.8 4.7 21 6.5 28.9 8.1 36.1 0.023 0.034
Eagle Green 89 Textured 4905306 6 2.13 54 2.1 9.3 3.4 15.3 4.7 21 5.9 26.2 0.023 0.034
Eagle White 40D L04BY406M 6 2.83 72 7.5 33.3 11.5 51.2 15.1 67.1 18.2 80.9 0.022 0.033
Eagle Blue 80 EC QC 4928021 6 × 2.5* 1.65 42 0.6 2.5 0.9 3.9 1.2 5.3 1.5 6.6 0.018 0.026
Eagle Clear 85 QC L04QC856M 6 × 2.5* 1.89 48 0.7 3.2 1.1 5 1.5 6.7 1.9 8.3 0.019 0.028
Eagle Red 85 QC L04QCR856M 6 × 2.5* 1.89 48 0.7 3.2 1.1 5 1.5 6.7 1.9 8.3 0.019 0.028
Eagle Blue 85 QC L04QB856M 6 × 2.5* 1.89 48 0.7 3.2 1.1 5 1.5 6.7 1.9 8.3 0.019 0.028
Eagle Blue 80 MD 4941101 1/4 6.3 1.75 44 1.3 6 2.1 9.2 2.8 12.3 3.4 15.3 0.024 0.035
Eagle Opaque 80 4940003 1/4 6.3 1.75 44 2.1 9.2 3.5 15.7 4.9 22 6.2 27.7 0.026 0.039
Eagle Orange 85 1032008 1/4 6.3 2 51 1.9 8.6 3 13.3 4 17.7 4.9 21.9 0.026 0.038
Eagle Clear 85 4908012 1/4 6.3 2 51 1.9 8.6 3 13.3 4 17.7 4.9 21.9 0.026 0.038
Eagle Red 90 4940023 1/4 6.3 2.5 64 10.6 47.2 15.3 67.9 19.2 85.5 22.5 100 0.026 0.038
Eagle Clear 95 4907012 1/4 6.3 2.5 64 3.6 16.1 5.4 24 6.9 30.8 8.2 36.6 0.026 0.039
Eagle Clear 85 QC 4934012 .250 × .098* 2 51 0.8 3.7 1.3 5.7 1.7 7.7 2.1 9.5 0.022 0.032
CONVEYING
Eagle Yellow 85 QC 4934022 .250 × .098* 2 51 0.8 3.7 1.3 5.7 1.7 7.7 2.1 9.5 0.022 0.032
Eagle Blue 80 EC 4928005 1/4 6.3 1.74 44 1.5 6.6 2.3 10.2 3.1 13.7 3.8 17 0.023 0.035
Eagle Blue 85 L04BL856.3 1/4 6.3 2 51 1.9 8.6 3 13.3 4 17.7 4.9 21.8 0.025 0.037
QC Connectors L04CON6S 25/pack

Eagle Orange 85 L04OG856MR 6 2.36 60 0.7 3.2 2.5 11 4.8 21.5 6.9 30.8 0.023 0.034
Eagle Green 89 L04G896MSR 6 2.36 60 2.4 10.6 7.2 32 14.7 65.5 22.7 100.9 0.023 0.034
Eagle Green 89 Textured 4940057 6 2.36 60 3.3 14.6 9.9 43.9 20.2 90 31.2 138.8 0.023 0.034
Eagle Orange 85 4940058 1/4 6.3 2.5 64 0.8 3.6 2.8 12.3 5.4 24.1 7.8 34.6 0.026 0.038
Eagle Hyfen 85 5218012 1/4 6.3 2.75 70 3.7 16.5 12.4 55.2 20 89 27.8 123.7 0.026 0.038
Part Numbers
Part Number A B H
Belt Guide NC1000 0.38 0.75 0.16

Round Belting

Eagle® Orange 85 L04OG857M 7 2.2 56 2.4 10.5 3.6 16.2 4.8 21.6 6 26.6 0.031 0.046
Eagle Clear 85 L04C857M 7 2.2 56 2.4 10.5 3.6 16.2 4.8 21.6 6 26.6 0.031 0.046
Eagle Green 89 4999637 7 2.48 63 3.9 17.4 6.4 28.6 8.8 39.3 11 49.1 0.031 0.046
Eagle Red 90 L04R907 7 2.76 70 12.9 57.4 18.6 82.7 23.4 104.1 27.4 121.8 0.031 0.047
Eagle Blue 80 MD 4941102 5/16 2.19 56 2.1 9.4 3.3 14.5 4.3 19.3 5.5 24.3 0.037 0.055
Eagle Orange 85 1032010 5/16 2.5 64 3 13.5 4.7 20.8 6.2 27.7 7.7 34.1 0.04 0.059
Eagle Clear 85 4908015 5/16 2.5 64 3 13.5 4.7 20.8 6.2 27.7 7.7 34.1 0.04 0.059
Eagle Clear 95 4907015 5/16 3.13 79 5.7 25.2 8.4 37.4 10.8 48.1 12.9 57.2 0.041 0.061
Eagle Clear 85 QC 4934015 .313 × .126* 2.5 64 1.3 5.7 2 8.9 2.7 11.9 3.3 14.7 0.034 0.05
Eagle Yellow 85 QC 4934023 .313 × .126* 2.5 64 1.3 5.7 2 8.9 2.7 11.9 3.3 14.7 0.034 0.05
Eagle Blue 80 EC 4928006 8 2.2 56 2.4 10.5 3.6 16.2 4.8 21.5 6.1 26.9 0.038 0.056
Eagle Clear 80 EC 4927006 8 2.2 56 2.4 10.5 3.6 16.2 4.8 21.5 6.1 26.9 0.038 0.056
Eagle Clear 85 L04C858 8 2.52 64 3.1 13.7 4.7 21.1 6.3 28.1 7.8 34.7 0.041 0.06
Eagle Blue 85 L04BL858M 8 2.52 64 3.1 13.7 4.7 21.1 6.3 28.1 7.8 34.7 0.041 0.06
Eagle Green 89 L04G898MS 8 2.83 72 5.1 22.8 8.4 37.4 11.5 51.3 14.4 64.1 0.04 0.06
CONVEYING
Eagle Red 90 4940024 8 3.15 80 16.8 74.9 24.3 107.9 30.5 135.8 35.7 158.9 0.041 0.061
Eagle Beige 95 L04BE958 8 3.15 80 13.6 60.5 19.3 85.7 24.1 107 28.1 125.1 0.042 0.062
Eagle White 40D L04BY408M 8 3.78 96 13.3 59.2 20.5 91 26.8 119.3 32.3 143.8 0.04 0.059
Eagle Blue 80 EC QC 4928022 8 × 3.2* 2.2 56 1 4.6 1.6 7.1 2.2 9.6 2.7 11.9 0.032 0.047
Eagle Clear 85 QC L04QC858M 8 × 3.2* 2.52 64 1.3 5.8 2 9 2.7 12.1 3.4 14.9 0.034 0.051
Eagle Red 85 QC L04QCR858M 8 × 3.2* 2.52 64 1.3 5.8 2 9 2.7 12.1 3.4 14.9 0.034 0.051
Eagle Blue 85 QC L04QB858M 8 × 3.2* 2.52 64 1.3 5.7 2 8.9 2.7 11.9 3.3 14.6 0.034 0.051

Eagle Green 89 L04G897MRS 7 2.76 70 3.3 14.5 9.8 43.5 20.1 89.2 30.9 137.6 0.031 0.046
Eagle Orange 85 4940059 5/16 3.13 79 1.3 5.6 4.3 19.3 8.5 37.6 12.1 54 0.04 0.059
Eagle Hyfen 85 5218015 5/16 3.44 87 3.7 16.5 12.4 55.2 20 89 27.8 123.7 0.04 0.059
Eagle Orange 85 L04OG858R 8 3.15 80 1.3 5.7 4.4 19.6 8.6 38.2 12.3 54.8 0.041 0.06
Eagle Green 89 L04G898MRS 8 3.15 80 4.3 18.9 12.8 56.8 26.2 116.4 40.4 179.5 0.04 0.06
Eagle Green 89 Textured 4940051 8 3.15 80 5.8 26 17.6 78.2 36 160.1 55.5 246.8 0.04 0.06
Eagle Beige 95 L04BE958R 8 3.78 96 3.8 16.9 7 31.1 10.4 46.3 13.6 60.5 0.042 0.062
Part Numbers
Part Number A B H
Belt Guide NC1001 0.5 0.75 0.19
9mm, 9.5mm, 3/8" Round Cross Sections
Round Link Belting
LINK BELTING Part Number
Max Product Weight Max Product Weight
Minimum Pulley Ø w/Idlers w/UHMW
25' 10m Cross Section (in) (mm) (lbs) (kg) (lbs) (kg)
Tango™ Belting 0470225 0470233 3/8" 3.0 76 190 86 65 30
Round Belting

Eagle® Green 89 Textured L04G899 9 3.19 81 4.7 21 7.7 34.4 10.6 47.2 13.3 59 0.051 0.076
Eagle Blue 80 MD 4941103 3/8 9.5 2.63 67 3 13.5 4.7 20.9 6.3 27.9 7.8 34.8 0.054 0.08
Eagle Opaque 80 4940005 3/8 9.5 2.63 67 4.7 20.8 8 35.4 11.1 49.4 14 62.3 0.058 0.087
Eagle Orange 85 1032012 3/8 9.5 3 76 4.4 19.4 6.7 29.9 9 39.9 11.1 49.2 0.057 0.086
Eagle Clear 85 4908018 3/8 9.5 3 76 4.4 19.4 6.7 29.9 9 39.9 11.1 49.2 0.057 0.086
Eagle Red 90 4940025 3/8 9.5 3.75 95 23.9 106.1 34.4 152.9 43.3 192.4 50.6 225.1 0.058 0.086
Eagle Clear 95 4907018 3/8 9.5 3.75 95 8.2 36.3 12.1 53.9 15.6 69.3 18.5 82.4 0.059 0.088
Eagle Clear 85 QC 4934018 .375 × .152* 3 76 1.8 8.2 2.9 12.7 3.8 17.1 4.7 21 0.048 0.071
Eagle Yellow 85 QC 4934025 .375 × .152* 3 76 1.8 8.2 2.9 12.7 3.8 17.1 4.7 21 0.048 0.071
Eagle Blue 80 EC 4928007 3/8 9.5 2.62 67 3.4 15 5.2 23.2 7 31 8.7 38.7 0.053 0.079
Eagle Blue 85 L04BL859.5M 3/8 9.5 3 76 4.4 19.4 6.7 29.9 9 39.9 11.1 49.2 0.057 0.085
Eagle Green 89 L04G899.5MS 3/8 9.5 3.39 86 7.2 32.1 11.8 52.7 16.3 72.4 20.3 90.4 0.057 0.084
Eagle Blue 80 EC QC 4928023 9.5 × 3.8* 2.64 67 1.5 6.4 2.3 10.1 3 13.5 3.8 16.8 0.045 0.067
CONVEYING

Eagle Orange 85 4940060 3/8 9.5 3.75 95 1.8 8 6.2 27.8 12.2 54.2 17.5 77.8 0.057 0.086
Eagle Hyfen 85 5218018 3/8 9.5 4.13 105 7.3 32.5 26.2 116.5 43.5 193.5 57.4 255.3 0.057 0.086
Blue 55D Can Cable 4816019 3/8 9.5 12 305 18.1 80.4 42.9 190.6 79.4 353.1 118.4 526.5 0.057 0.086
Natural 55D Can Cable 4816018 3/8 9.5 12 305 18.1 80.4 42.9 190.6 79.4 353.1 118.4 526.5 0.057 0.086
Natural 63D Can Cable 4899006 3/8 9.5 12 305 18.1 80.4 42.9 190.6 79.4 353.1 118.4 526.5 0.058 0.087
Red 50D LCF Can Cable 4816020 3/8 9.5 10 254 23.8 105.9 57.8 257.2 104.3 463.8 152.3 677.2 0.058 0.087
Green 63D Can Cable 4817018 3/8 9.5 12 305 18.1 80.4 42.9 190.6 79.4 353.1 118.4 526.5 0.058 0.087
Blue 55D Aramid Can Cable 4899012 3/8 9.5 12 305 41.7 185.5 149.1 663.2 281.1 1250.4 — — 0.057 0.086
Part Numbers
Belt Guide w/ Mounting Channel GB1002-5G GB1002-5S C5 0.59 1.1 0.84 0.22
Part Number A B H
Belt Guide NC1002 0.63 1 0.22
10mm, 12mm, 12.7mm, 1/2" Round Cross Sections
Round Link Belting
Tango™ Belting 0470325 0470333 1/2" 3.0 76 255 116 85 39
Round Belting

Eagle® Blue 80 EC 4928008 10 2.76 70 3.7 16.4 5.8 25.6 7.7 34.1 9.6 42.6 0.059 0.088
Eagle Clear 80 EC 4927008 10 2.76 70 3.7 16.4 5.8 25.6 7.7 34.1 9.6 42.6 0.059 0.088
Eagle Orange 85 L04OG8510M 10 3.15 80 4.8 21.4 7.4 33 9.9 44 12.2 54.2 0.063 0.094
Eagle Clear 85 L04C8510M 10 3.15 80 4.8 21.4 7.4 33 9.9 44 12.2 54.2 0.063 0.094
Eagle Blue 85 L04BL8510M 10 3.15 80 4.8 21.4 7.4 33 9.9 44 12.2 54.2 0.063 0.094
Eagle Green 89 L04G8910MS 10 3.54 90 8 35.4 13.1 58.2 18 79.9 22.4 99.8 0.063 0.093
Eagle Red 90 L04R9010M 10 3.94 100 26.3 116.9 37.9 168.4 47.6 211.9 55.7 248 0.064 0.095
Eagle Beige 95 L04BE9510M 10 3.94 100 21.2 94.5 30.1 133.8 37.6 167.2 43.9 195.5 0.065 0.097
Eagle White 40D L04BY4010M 10 4.72 120 20.8 92.5 32 142.2 41.9 186.5 50.5 224.6 0.062 0.092
Eagle Blue 55D L04BY5510M 10 5.12 130 39.3 174.6 60.4 268.7 78.5 349.2 93 413.8 0.063 0.094
Eagle Red 85 QC L04QCR8510M 10 × 3.8* 3.15 80 2.1 9.3 3.2 14.4 4.3 19.3 5.3 23.8 0.054 0.081
Eagle Blue 85 QC L04QB8510M 10 × 3.8* 3.15 80 2.1 9.3 3.2 14.4 4.3 19.3 5.3 23.8 0.054 0.081
Eagle Orange 85 L04OG8512M 12 3.78 96 6.9 30.8 10.7 47.5 14.2 63.3 17.5 78 0.091 0.136
CONVEYING
Eagle Clear 85 L04C8512M 12 3.78 96 6.9 30.8 10.7 47.5 14.2 63.3 17.5 78 0.091 0.136
Eagle Green 89 L04G8912MS 12 4.25 108 11.5 51.2 18.9 84.1 26 115.5 32.4 144.3 0.09 0.135
Eagle Red 90 L04R9012M 12 4.72 120 37.8 168.4 54.5 242.5 68.6 305.2 80.3 357.2 0.092 0.137
Eagle Blue 85 QC L04QB8512 12 × 5.2* 3.78 96 2.8 12.6 4.4 19.7 5.9 26.3 7.3 32.5 0.074 0.11
Eagle Blue 80 MD 4941105 1/2 12.7 3.5 89 5.4 23.9 8.4 37.3 11.2 49.7 13.8 61.6 0.095 0.142
Eagle Orange 85 1032016 1/2 12.7 4 102 7.8 34.5 12 53.2 16 71 19.6 87.4 0.102 0.152
Eagle Clear 85 4908024 1/2 12.7 4 102 7.8 34.5 12 53.2 16 71 19.6 87.4 0.102 0.152
Eagle Red 90 4940026 1/2 12.7 5 127 42.4 188.6 61.1 271.7 76.9 342 90 400.2 0.103 0.153
Eagle Clear 95 4907024 1/2 12.7 5 127 14.5 64.6 21.6 95.9 27.7 123.1 32.9 146.4 0.105 0.156
Eagle Clear 85 QC 4934024 .500 × .205* 4 102 3.3 14.5 5.1 22.5 6.8 30.2 8.4 37.2 0.085 0.126
Eagle Yellow 85 QC 4934026 .500 × .205* 4 102 3.3 14.5 5.1 22.5 6.8 30.2 8.4 37.2 0.085 0.126
Eagle Red 85 L04R8512.7 1/2 12.7 4 102 7.8 34.5 12 53.2 16 71 19.6 87.4 0.102 0.152
Eagle Blue 85 L04BL8512.7 1/2 12.7 4 102 7.8 34.5 12 53.2 15.9 70.9 19.6 87.4 0.102 0.152
QC Connectors L04CON10S 20/pack (Use for 3/8" and 10mm)
QC Connectors L04CON13S 20/pack (Use for 1/2” and 12-13mm)

Eagle Orange 85 L04OG8510MR 10 3.94 100 2 8.8 6.9 30.6 13.4 59.7 19.3 85.7 0.063 0.094
Eagle Green 89 L04G8910MRS 10 3.94 100 6.6 29.5 20 88.8 40.9 181.9 63.1 280.5 0.063 0.093
Eagle Beige 95 L04BE9510R 10 4.72 120 6 26.7 11 48.9 16.2 72.1 21.2 94.3 0.065 0.097
Eagle Orange 85 L04OG8512R 12 4.72 120 2.9 12.7 9.9 44.1 19.3 85.9 27.7 123.4 0.091 0.136
Eagle Green 89 L04G8912MRS 12 4.72 120 9.6 42.6 28.8 127.9 58.9 262 90.8 404 0.09 0.135
Eagle Green 89 Textured 4940053 12 4.72 120 13.2 58.5 39.5 175.9 81 360.2 124.9 555.4 0.09 0.135
Eagle Orange 85 4940061 1/2 12.7 5 127 3.2 14.2 11.1 49.4 21.6 96.3 31.1 138.3 0.102 0.152
Eagle Hyfen 85 5218024 1/2 12.7 5.5 140 7.3 32.5 26.2 116.5 43.5 193.5 57.4 255.3 0.102 0.152

Part Numbers
* QC dimensions are shown O.D x I.D. (O.D. is the outer

Part Number A B H
diameter of the belt. I.D. is the inner diameter of the belt.)
Belt Guide NC1003 0.75 1.25 0.28 Dimensions are for reference only.
13mm, 9/16" Round Cross Sections
Round Link Belting
Tango™ Belting 0470425 0470433 9/16" 5.5 140 450 204 155 70
Round Belting

Eagle® Clear 85 QC L04QC8513 13 x 5.2* 4.09 104 3.5 15.3 5.4 23.8 7.2 31.9 8.9 39.4 0.09 0.134
Eagle Red 85 QC L04QCR8513M 13 x 5.2* 4.09 104 3.5 15.3 5.4 23.8 7.2 31.9 8.9 39.4 0.09 0.134
Eagle Blue 80 MD 4941106 9/16 3.94 100 6.9 30.6 10.6 47.1 14.2 63 17.6 78.2 0.121 0.18
Eagle Orange 85 1032018 9/16 4.5 114 9.8 43.7 15.1 67.3 20.2 89.8 24.9 110.6 0.129 0.192
Eagle Clear 85 4908027 9/16 4.5 114 9.8 43.7 15.1 67.3 20.2 89.8 24.9 110.6 0.129 0.192
Eagle Red 90 4940036 9/16 5.63 143 53.7 238.6 77.3 343.8 97.3 432.7 113.8 506.3 0.13 0.194
Eagle Clear 95 4907027 9/16 5.63 143 18.4 81.7 27.3 121.3 35 155.8 41.7 185.3 0.133 0.197

Eagle Orange 85 4940062 9/16 5.63 143 4.1 18 14 62.5 27.4 121.8 39.3 174.9 0.129 0.192
Eagle Hyfen 85 5218027 9/16 6.19 157 16.7 74.3 36.6 162.8 58 258 75.8 337.2 0.129 0.192
CONVEYING
Part Numbers
Part Number A B H
Belt Guide NC1004 1 1.25 0.32
Round Belting

Eagle® Opaque 80 L04OP8015M 15 4.13 105 11.6 51.6 19.7 87.7 27.6 122.6 34.7 154.4 0.145 0.216
Eagle Blue 85 L04BL8515 15 4.72 120 10.8 48.1 16.7 74.2 22.2 99 27.4 121.9 0.142 0.212
Eagle Green 89 L04G8915MS 15 5.31 135 18 80 29.5 131.4 40.6 180.5 50.7 225.5 0.141 0.21
Eagle Red 90 4999315 15 5.91 150 59.1 262.9 85.2 378.8 107.2 476.8 125.4 557.9 0.144 0.214
Eagle Beige 95 L04BE9515M 15 5.91 150 47.8 212.5 67.7 301.2 84.6 376.2 98.9 440 0.146 0.217
Eagle White 40D L04BY4015 15 7.09 180 46.8 208.1 71.9 319.9 94.3 419.6 113.6 505.4 0.139 0.207
Eagle Blue 55D L04BY5515 15 7.68 195 88.3 392.9 135.9 604.6 176.7 785.8 209.3 931 0.142 0.212
Eagle Blue 80 MD 4941107 5/8 4.38 111 8.4 37.5 13.1 58.2 17.4 77.6 21.7 96.4 0.149 0.222
Eagle Orange 85 1032020 5/8 5 127 12.1 53.9 18.7 83.1 24.9 110.8 30.7 136.5 0.16 0.238
Eagle Clear 85 4908030 5/8 5 127 12.1 53.9 18.7 83.1 24.9 110.8 30.7 136.5 0.16 0.238
Eagle Clear 95 4907030 5/8 6.25 159 22.7 100.9 33.7 149.8 43.2 192.3 51.4 228.7 0.164 0.243
Eagle Clear 85 QC 4934030 .625 × .273* 5 127 5 22.1 7.7 34.2 10.3 45.9 12.7 56.6 0.129 0.192
Eagle Yellow 85 QC 4934020 .625 × .273* 5 127 5 22.1 7.7 34.2 10.3 45.9 12.7 56.6 0.129 0.192
Eagle Clear 85 QC L04QC8516M 16 × 6.8* 5.04 128 5.1 22.7 7.9 35.2 10.6 47.2 13.1 58.2 0.133 0.198
QC Connectors 4935030 15/pack

Eagle Orange 85 L04OG8515MR 15 5.91 150 4.5 19.9 15.5 68.9 30.2 134.3 43.3 192.8 0.142 0.212
CONVEYING
Eagle Green 89 L04G8915MRS 15 5.91 150 15 66.5 44.9 199.9 92 409.3 141.9 631.2 0.141 0.21
Eagle Beige 95 L04BE9515R 15 7.09 180 13.5 60.1 24.7 109.9 36.5 162.4 47.8 212.6 0.146 0.217
Eagle Hyfen 85 5218030 5/8 6.88 175 16.7 74.3 36.6 162.8 58 258 75.8 337.2 0.16 0.238
Part Numbers
Part Number A B H
Belt Guide NC1005 1 1.25 0.35
Round Link Belting
Tango™ Belting 0470525 0470533 3/4" 8.5 216 360 163 120 54
Round Belting
Eagle® Green 89 L04G8918MS 18 6.38 162 25.9 115.2 42.5 189.2 58.4 259.9 73 324.6 0.203 0.303
Eagle Green 89 Textured 4940091 18 6.38 162 18.8 83.7 30.9 137.5 42.4 188.8 53 235.9 0.203 0.303
Eagle White 40D L04BY4018 18 8.5 216 67.4 299.7 103.6 460.7 135.8 604.2 163.6 727.8 0.2 0.298
Eagle Blue 55D L04BY5518 18 9.21 234 127.2 565.8 195.7 870.6 254.4 1131.6 301.4 1340.7 0.205 0.305
Eagle Orange 85 1032024 3/4 6 152 17.5 77.7 26.9 119.6 35.9 159.6 44.2 196.6 0.23 0.342
Eagle Clear 85 4908033 3/4 6 152 17.5 77.7 26.9 119.6 35.9 159.6 44.2 196.6 0.23 0.342
Eagle Clear 95 4907033 3/4 7.5 191 32.7 145.3 48.5 215.7 62.3 277 74 329.4 0.236 0.351
Eagle Green 89 Textured 4940055 18 7.09 180 29.6 131.7 89 395.7 182.2 810.5 280.9 1249.7 0.203 0.303
Eagle Orange 85 4940064 3/4 7.5 191 7.2 32.1 25 111.1 48.7 216.6 69.9 311 0.23 0.342
Eagle Hyfen 85 5218033 3/4 8.25 210 16.7 74.3 36.6 162.8 58 258 75.8 337.2 0.23 0.342
CONVEYING
Part Numbers
Part Number A B H
Belt Guide NC1007 1 1.5 0.41
Round Belting — 20mm

Eagle Green 89 L04G8920MS 20 7.09 180 32 142.3 52.5 233.5 72.1 320.8 90.1 400.8 0.251 0.374
Eagle White 40D L04BY4020 20 9.45 240 83.2 370 127.9 568.7 167.7 745.9 202 898.6 0.247 0.368
V BELTING FOR CONVEYING
6x4, 8x5, 10x4mm Cross Section
V Belting V T-Top
Part Dimensions w × h* Minimum Pulley Ø 4% 6% 8% 10%
Material and Color Cross Section Number (in) (mm) (in) (mm) (lbs) (N) (lbs) (N) (lbs) (N) (lbs) (N) lbs/ft kg/m
Eagle® Blue 80 EC 6mm × 4mm 4928009 6.5 × 4 1.1 28 0.8 3.7 1.5 6.7 2.1 9.4 2.7 12.1 0.015 0.023
Eagle Clear 80 EC 6mm × 4mm 4927009 6.5 × 4 1.1 28 0.8 3.7 1.5 6.7 2.1 9.4 2.7 12.1 0.015 0.023
Eagle Clear 85 6mm × 4mm L04C850604 6.5 × 4 1.26 32 1 4.5 1.7 7.6 2.4 10.7 3 13.5 0.016 0.024
Eagle Blue 85 6mm × 4mm L04BL850604 6.5 × 4 1.25 32 1 4.5 1.7 7.6 2.3 10.7 3 13.5 0.016 0.024
Eagle Blue 80 EC 8mm × 5mm 4928010 8×5 1.38 35 1.3 5.7 2.4 10.5 3.3 14.6 4.2 18.9 0.024 0.035
Eagle Clear 80 EC 8mm × 5mm 4927010 8×5 1.38 35 1.3 5.7 2.4 10.5 3.3 14.6 4.2 18.9 0.024 0.035
Eagle Opaque 80 8mm × 5mm 4940006 8×5 1.38 35 1.6 7.1 3.3 14.7 5.2 23.1 7 31.2 0.026 0.039
Eagle Red 85 8mm × 5mm L04R8585M 8×5 1.57 40 1.5 6.8 2.6 11.5 3.6 16.2 4.6 20.5 0.025 0.038
Eagle Blue 85 8mm × 5mm L04BL8585M 8×5 1.57 40 1.5 6.8 2.6 11.5 3.6 16.2 4.6 20.5 0.025 0.038
Eagle Red 90 8mm × 5mm 4940027 8×5 2 50 10.8 48.1 15.6 69.3 19.6 87.2 22.9 102 0.026 0.039
Eagle White 40D 8mm × 5mm L04BY400805 8×5 2.36 60 6 26.5 10.2 45.3 14 62.4 17.3 77.2 0.025 0.037
Eagle Blue 80 EC 10mm × 4mm T-Top 4928011 10 × 4 1.1 28 1 4.6 1.9 8.5 2.7 11.8 3.4 15.3 0.019 0.028
Eagle Clear 80 EC 10mm × 4mm T-Top 4927011 10 × 4 1.1 28 1 4.6 1.9 8.5 2.7 11.8 3.4 15.3 0.019 0.028
Z/10, 3L Cross Section

V Belting V Crown-Top T-Top Twin

Eagle Orange 85 3L 1032030 3/8 × 7/32 1.75 44 2.1 9.5 3.6 16.1 5.1 22.6 6.4 28.6 0.035 0.053
CONVEYING
Eagle Clear 85 3L 4912063 3/8 × 7/32 1.75 44 2.2 9.7 3.7 16.5 5.2 23.1 6.6 29.3 0.035 0.053
Eagle Blue 85 3L L04BL853L 3/8 × 7/32 1.75 45 2.1 9.5 3.6 16.1 5.1 22.6 6.4 28.6 0.035 0.053
Eagle Clear 95 3L 4911063 3/8 × 7/32 2.19 56 4 17.9 6.6 29.2 8.8 39.3 10.8 47.9 0.036 0.054
Eagle Orange 85 3L Crown-Top 1032032 9/16 × 1/4 2 51 3 13.2 5 22.4 7.1 31.5 9 39.9 0.049 0.073
Eagle Orange 85 3L T-Top 1032031 9/16 × 19/64 2.38 60 3.5 15.7 6 26.5 8.4 37.2 10.6 47.2 0.058 0.087
Eagle Clear 85 3L T-Top 4912064 9/16 × 19/64 2.38 60 3.6 16.1 6.1 27.2 8.6 38.2 10.9 48.3 0.058 0.087
Eagle Orange 85 3L Twin 1032033 15/16 × 17/64 2.13 54 5.9 26.2 10 44.5 14 62.4 17.8 79 0.098 0.145
Eagle Clear 85 3L Twin 4912065 15/16 × 17/64 2.13 54 6 26.9 10.2 45.6 14.4 63.9 18.2 81 0.098 0.145
Eagle Clear 95 3L Twin 4911065 15/16 × 17/64 2.5 64 11.1 49.5 18.1 80.6 24.4 108.5 29.7 132.2 0.1 0.149
Eagle Blue 80 EC Z/10 4928012 10 × 6.5 1.79 46 2.1 9.2 3.8 16.8 5.3 23.5 6.8 30.3 0.038 0.057
Eagle Clear 80 EC Z/10 4927012 10 × 6.5 1.79 46 2.1 9.2 3.8 16.8 5.3 23.5 6.8 30.3 0.038 0.057
Eagle Opaque 80 Z/10 4940008 10 × 6.5 1.79 46 2.5 11.3 5.2 23.3 8.3 36.8 11.1 49.5 0.041 0.062
Eagle Orange 85 Z/10 4940114 10 × 6.5 1.88 52 2.5 10.9 4.2 18.5 5.8 26 7.4 32.9 0.041 0.061
Eagle Clear 85 Z/10 4940118 10 × 6.5 2.05 52 2.5 11.2 4.3 19 6 26.6 7.6 33.7 0.041 0.061
Eagle Ivory 85 Z/10 L04I85Z 10 × 6.5 2.05 52 6.9 30.8 10.6 47 13.9 61.7 16.8 74.8 0.04 0.06
Eagle Blue 85 Z/10 L04BL85Z 10 × 6.5 1.88 52 2.5 10.8 4.2 18.3 5.8 25.6 7.4 32.5 0.041 0.061
Eagle Green 89 Z/10 L04G89Z 10 × 6.5 2.3 59 12.4 55.3 19 84.5 24.9 110.6 30 133.4 0.04 0.06
Eagle Red 90 Z/10 4940028 10 × 6.5 2.5 65 16.9 75.2 24.3 108.3 30.6 136.3 35.9 159.5 0.041 0.061
Eagle White 40D Z/10 L04BY40Z 10 × 6.5 3.07 78 9.4 41.9 16.1 71.6 22.2 98.7 27.4 122 0.039 0.058
Eagle Blue 55D Z/10 L04BY55Z 10 × 6.5 3.33 85 37.1 165.2 54.6 242.8 68.5 304.8 79.3 352.9 0.041 0.061
Eagle Beige 95 3L 4940070 3/8 × 7/32 2.63 67 11.4 50.5 26.5 117.9 38.9 172.9 47.8 212.8 0.036 0.054
Eagle Hyfen 85 3L Twin 5299010 15/16 × 17/64 2.92 74 15.5 68.8 21.8 96.8 28.4 126.4 34.7 154.4 0.095 0.142
Eagle Orange 85 Z/10 4940065 10 × 6.5 2.38 65 2.4 10.7 5.7 25.3 9.1 40.4 12 53.3 0.04 0.06
Eagle Ivory 85 Z/10 L04I85ZR 10 × 6.5 2.56 65 3.1 13.7 9.3 41.3 14.8 65.7 18.8 83.8 0.04 0.06
Trackstar® V Belt Guides

Part Numbers
Belt Section Channel Channel Channel Type A B D H
V Belt Guide with Mounting Channel GB2000-3G GB2000-3S GB2000-3A C3 0.59 0.79 0.8 0.16
Belt Section Part Number A B H

V Belt Guide NC2000 0.38 0.79 0.16
* w (width) is the widest part of the belt. h (height) is the tallest part of the belt, including the belting top surface.
A Cross Section
Link V Belting V SGT

25' 100' 10m 30m Cross Section (in) (mm) (lbs) (kg) (lbs) (kg)
Tango™ Belting 0470725 0470733 A 3.0 76 340 154 115 52

PowerTwist® SuperGrip Top PU 0430101 0430100 A 3.0 76 200 91 65 30
PowerTwist® SuperGrip Top PVC 0409100 04091030 A 3.0 76 200 91 65 30
PowerTwist® Friction Top® 0405081 0408081 0418085 A 2.5 64 200 91 65 30
PowerTwist® Bridge Top™ 0499022 0499020 0419022 A 3.0 76 340 154 115 52
PowerTwist Plus® Antistatic 0408505 0408501 040850010 0408500 A 3.0 76 340 154 115 52
V Belting V Twin Hi-Ridge-Top Ridge-Top Lo-Ridge-Top AA SGT/CXF/CXR

Eagle® Blue 80 EC A/13 4928013 13 × 8 2.2 56 3.4 14.9 6.1 27.3 8.6 38.2 11.1 49.3 0.062 0.092
Eagle Clear 80 EC A/13 4927013 13 × 8 2.2 56 3.4 14.9 6.1 27.3 8.6 38.2 11.1 49.3 0.062 0.092
Eagle Blue 80 MD A/13 4941108 1/2 × 5/16 13 × 8 2.2 56 2.8 12.6 4.8 21.5 6.8 30.4 8.8 38.9 0.061 0.091
Eagle Opaque 80 A/13 4940009 1/2 × 5/16 13 × 8 2.2 56 4.1 18.1 8.4 37.3 13.2 58.8 17.8 79.2 0.066 0.099
Eagle Orange 85 A/13 1032038 1/2 × 5/16 13 × 8 2.5 64 4 17.6 6.7 29.9 9.4 41.9 11.9 53.1 0.066 0.098
Eagle Clear 85 A/13 4912066 1/2 × 5/16 13 × 8 2.5 64 4.1 18.1 6.9 30.6 9.7 43 12.2 54.4 0.066 0.098
Eagle Ivory 85 A/13 L04I85A 1/2 × 5/16 13 × 8 2.52 64 11.2 50 17.2 76.4 22.5 100.2 27.3 121.4 0.065 0.096
Eagle Blue 85 A/13 L04BL85A 1/2 × 5/16 13 × 8 2.5 64 4 18 6.8 30.4 9.5 42.7 12 54.1 0.066 0.098
CONVEYING
Eagle Green 89 A/13 L04G89A 1/2 × 5/16 13 × 8 2.83 72 20.2 89.8 30.8 137.2 40.4 179.6 48.7 216.6 0.066 0.098
Eagle Red 90 A/13 4940029 1/2 × 5/16 13 × 8 3.13 80 27 120.2 38.9 173.1 49 217.9 57.3 255 0.066 0.098
Eagle Beige 95 A/13 L04BE95A 1/2 × 5/16 13 × 8 3.1 80 16.6 73.8 24.8 110.3 32 142.5 38.4 170.7 0.068 0.101
Eagle Clear 95 A/13 4911066 1/2 × 5/16 13 × 8 3.13 79 7.5 33.2 12.2 54.2 16.4 72.9 20 88.9 0.067 0.1
Eagle White 40D A/13 L04BY40A 1/2 × 5/16 13 × 8 3.78 96 15.5 69.1 26.6 118.1 36.6 162.8 45.2 201.2 0.064 0.096
Eagle Blue 55D A/13 L04BY55A 1/2 × 5/16 13 × 8 4.09 104 60.3 268.3 88.6 394.3 111.3 495 128.8 573.1 0.066 0.098
Eagle Red 85 CXF A/13 4924320 0.50 × 0.41 13 × 10.54 3.28 83 4.6 20.5 7.3 32.3 9.9 44 12.3 54.8 0.091 0.135
Eagle Ivory 85 SGT PU A/13 493030030M 0.50 × 0.47 13 × 12.06 3.28 83 11.2 50 17.2 76.4 22.5 100.2 27.3 121.4 0.085 0.127
Eagle Ivory 85 SGT PVC A/13 L04I85ASG 0.50 × 0.53 13 × 13.51 3.28 83 11.2 50 17.2 76.4 22.5 100.2 27.3 121.4 0.095 0.142
Eagle Ivory 85 SGT TPE A/13 493120030M 0.50 × 0.48 13 × 12.34 3.28 83 11.2 50 17.2 76.4 22.5 100.2 27.3 121.4 0.028 0.124
Eagle Green 89 SGT PVC A/13 L04G89ASG 0.50 × 0.53 13 × 13.51 3.69 94 20.2 89.8 30.8 137.2 40.4 179.6 48.7 216.6 0.096 0.143
Eagle Red 90 SGT PVC A/13 L04R90ASG 0.50 × 0.53 13 × 13.51 3.69 94 27 120.2 38.9 173.1 49 217.9 57.3 255 0.096 0.143
Eagle White 40D SGT PVC A/13 L04BY40ASG 0.50 × 0.53 13 × 13.51 5.34 136 15.5 69.1 26.6 118.1 36.6 162.8 45.2 201.2 0.095 0.141
Eagle Orange 85 A/13 Hi-Ridge-Top 1032040 1/2 × 5/8 5 127 5.5 24.7 9.4 41.8 13.2 58.7 16.7 74.3 0.092 0.137
Eagle Clear 85 A/13 Hi-Ridge-Top 4911102 1/2 × 5/8 5 127 5.3 23.7 9 40.1 12.7 56.3 16 71.3 0.086 0.128
Eagle Orange 85 A/13 Lo-Ridge-Top 1032039 1/2 × 7/16 3.5 89 4.3 19.1 7.3 32.4 10.2 45.4 12.9 57.5 0.071 0.106
Eagle Clear 85 A/13 Lo-Ridge-Top 4912067 1/2 × 7/16 3.5 89 4.3 19.3 7.3 32.6 10.3 45.8 13 58 0.07 0.104
Eagle Green 89 A/13 Ridge-Top L04G89AX 13 × 16 5.67 144 33 146.8 50.4 224.3 66 293.6 79.6 354.1 0.107 0.159
Eagle Orange 85 A Twin 1032041 1-3/16 × 5/16 2.5 64 9.3 41.4 15.8 70.2 22.1 98.5 28.1 124.8 0.154 0.23
Eagle Clear 85 A Twin 4912068 1-3/16 × 5/16 2.5 64 9.6 42.5 16.2 72 22.7 100.9 28.7 127.9 0.154 0.23
Eagle Orange 85 AA 1232550 1/2 × 13/32 3.25 83 5.6 25.1 9.6 42.5 13.4 59.6 17 75.5 0.093 0.139
Eagle Opaque 80 A/13 L04OP80AR 1/2 × 5/16 13 × 8 3.15 80 5.9 26.3 16 71.1 24 106.9 29.4 130.7 0.066 0.099
Eagle Orange 85 A/13 4940066 1/2 × 5/16 13 × 8 3.13 80 3.9 17.3 9.3 41.2 14.8 65.8 19.5 86.6 0.065 0.097
Eagle Ivory 85 A/13 L04I85AR 1/2 × 5/16 13 × 8 3.15 80 4.9 21.9 14.8 66 23.6 105.1 30.1 134.1 0.065 0.096
Eagle Green 89 A/13 L04G89AR 1/2 × 5/16 13 × 8 3.15 80 3.8 16.8 14.3 63.5 53.9 239.9 88.7 394.8 0.065 0.096
Eagle Beige 95 A/13 4940075 1/2 × 5/16 13 × 8 3.78 96 20.9 93 48.8 217.1 71.6 318.4 88.1 391.7 0.067 0.099
Eagle Beige 95 A/13 Cogged 4940071 1/2 × 5/16 13 × 8 2.78 71 20.9 93 48.8 217.1 71.6 318.4 88.1 391.7 0.067 0.099
Eagle Hyfen 95 A 5260200 1/2 × 3/8 3.75 95 18.3 81.3 26.6 118.2 34.1 151.8 41.3 183.6 0.077 0.114
Eagle Hyfen 95 A Cogged 5220000 1/2 × 3/8 2.75 70 18.3 81.3 26.6 118.2 34.1 151.8 41.3 183.6 0.077 0.114
Eagle Hyfen 85 A Ridge-Top 5299007 1/2 × 9/16 6.19 157 17.4 77.4 25.1 111.5 33.8 150.2 42.8 190.2 0.1 0.148
Eagle Hyfen 85 A Twin 5299019 1-3/16 × 5/16 3.44 87 45.5 202.2 34.4 153.2 44.9 199.9 54.9 244.2 0.151 0.224
Eagle Hyfen 85 CXF A 5260520 0.50 × 0.51 4.53 115 17.4 77.4 25.1 111.5 33.8 150.2 42.8 190.2 0.103 0.153
Eagle Hyfen 85 CXR A 5260525 1.19 × 0.41 4.53 115 17.4 77.4 25.1 111.5 33.8 150.2 42.8 190.2 0.088 0.131
Eagle Hyfen 85 CXF A Twin 5260572 0.50 × 0.51 4.53 115 45.5 202.2 34.4 153.2 44.9 199.9 54.9 244.2 0.203 0.302
Eagle Hyfen 85 CXR A Twin 5260577 1.19 × 0.41 4.53 115 45.5 202.2 34.4 153.2 44.9 199.9 54.9 244.2 0.174 0.259
Eagle Ivory 85 SGT PU A/13 493060030M 0.50 × 0.47 13 × 12.06 4.11 104 4.9 21.9 14.8 66 23.6 105.1 30.1 134.1 0.085 0.127
Eagle Ivory 85 SGT PVC A/13 L04I85ARSG 0.50 × 0.53 13 × 13.51 4.11 104 4.9 21.9 14.8 66 23.6 105.1 30.1 134.1 0.095 0.142
Eagle Ivory 85 SGT TPE A/13 493150030M 0.50 × 0.48 13 × 12.34 4.11 104 4.9 21.9 14.8 66 23.6 105.1 30.1 134.1 0.084 0.124
V BELTING PRODUCTS FOR CONVEYING
Part Numbers
V Belt Size Channel Channel Channel Type A B D H
V Belt Guide with Mounting Channel A GB2001-3G GB2001-3S GB2001-3A C3 0.59 0.79 0.8 0.2
V Belt Guide with Mounting Channel A Twin GB2006-5G GB2006-5S C5 0.59 1.42 0.84 0.2
V Belt Size Part Number A B H

V Belt Guide A NC2001 0.5 0.79 0.2
V Belt Guide A Twin NC2006 0.59 1.42 0.2
T-Max® Tensioner/Pulley Assembly

Assembly Component
Part Number Component Part Number
Tensioner RT1001 Force Range: 0-30 lb

FS0578
Pulley VA3001
Tensioner RT1001 Force Range: 0-30 lb Zerk fitted to apply grease to the spring cavity.
FS0581ZF
Pulley VA3001
Tensioner RT1001-L Force Range: 0-30 lb Zerk fitted to apply grease to the shaft area.
FS0577ZF
Pulley VX3012
FS0524
Pulley VA3001
CONVEYING
B Cross Section

25' 100' 10m 30m Cross Section (in) (mm) (lbs) (kg) (lbs) (kg)
Tango™ Belting 0470825 0470833 B 5.5 140 612 278 204 93

PowerTwist® Super Grip Top PU 0435101 0435100 B 5.5 140 400 181 135 61
PowerTwist® Super Grip Top PVC 0409200 04092030 B 5.5 140 400 181 135 61
PowerTwist® Friction Top® 0405082 0408082 0418088 B 5.0 127 400 181 135 61
PowerTwist® Bridge Top™ 0499021 0499002 0419002 B 5.5 140 612 278 204 93
PowerTwist® Roller Drive™ 0410300-25 0410300 0411301 0411300 B 5.0 127 275 125 95 43
PowerTwist Plus® Antistatic 0408605 0408601 040860010 0408600 B 5.5 140 612 278 204 93
PowerTwist® Reduced Contact Surface 0419300 B 5.5 140 612 278 204 93
V Belting V Ridge-Top BB Ribbed Wing-Top SGT

Eagle® Blue 80 EC B/17 4928014 17 × 11.5 3.17 81 6.1 27.3 11.2 49.9 15.7 69.9 20.3 90.2 0.113 0.168
Eagle Clear 80 EC B/17 4927014 17 × 11.5 3.17 81 6.1 27.3 11.2 49.9 15.7 69.9 20.3 90.2 0.113 0.168
Eagle Blue 80 MD B/17 4941109 21/32 × 7/16 17 × 11.5 3.17 81 5 22 8.4 37.3 11.8 52.6 15.1 67 0.113 0.168
Eagle Opaque 80 B/17 4940010 21/32 × 7/16 17 × 11.5 3.17 81 7.4 33.1 15.3 68 24.1 107.2 32.5 144.5 0.121 0.18
Eagle Orange 85 B/17 1032047 11/16 × 13/32 17.5 × 10 3.25 83 7 31.1 11.8 52.7 16.6 73.9 21.1 93.7 0.116 0.172
CONVEYING
Eagle Clear 85 B/17 4912069 11/16 × 13/32 17.5 × 10 3.25 83 7.2 31.9 12.1 54 17 75.8 21.6 96 0.116 0.172
Eagle Ivory 85 B/17 L04I85B 21/32 × 7/16 17 × 11.5 3.62 92 20.6 91.6 31.4 139.8 41.2 183.4 49.9 222.2 0.118 0.175
Eagle Blue 85 B/17 L04BL85B 21/32 × 7/16 17 × 11.5 3.25 92 7.3 31 12.4 52.5 17.4 73.7 22 93.4 0.121 0.18
Eagle Green 89 B/17 L04G89B 21/32 × 7/16 17 × 11.5 4.07 104 37 164.4 56.4 251.1 73.9 328.7 89.1 396.4 0.12 0.178
Eagle Clear 95 B/17 4911069 11/16 × 13/32 17.5 × 10 4.13 105 13.2 58.6 21.5 95.5 28.9 128.6 35.2 156.8 0.119 0.177
Eagle White 40D B/17 L04BY40B 21/32 × 7/16 17 × 11 5.2 132 27.6 122.6 47.1 209.5 64.9 288.9 80.3 357 0.114 0.17
Eagle Blue 55D B/17 L04BY55B 21/32 × 7/16 17 × 11.5 5.89 150 110.4 491 162.2 721.6 203.6 905.8 235.8 1048.7 0.121 0.18
Eagle Red 90 B/17 4940030 21/32 × 7/16 17 × 11.5 4.5 115 49.3 219.3 71 315.9 89.4 397.5 104.6 465.2 0.12 0.178
Eagle Beige 95 B/17 L04BE95B 21/32 × 7/16 17 × 11.5 4.5 115 30.4 135.1 45.4 201.9 58.6 260.8 70.2 312.3 0.124 0.184
Eagle Orange 85 B/17 Ribbed 1032046 11/16 × 13/32 17.5 × 10 3.25 83 6.5 28.7 10.9 48.6 15.3 68.3 19.4 86.5 0.107 0.159
Eagle Green 89 B/17 Ridge-Top L04G89BX 17 × 19.5 6.91 176 53.7 238.9 82 364.9 107.4 477.7 129.5 576.1 0.174 0.259
Eagle Orange 85 B/17 Wing-Top 1032048 11/16 × 5/8 5 127 7.8 34.6 13.2 58.7 18.5 82.3 23.5 104.3 0.129 0.192
Eagle Orange 85 BB 1232600 11/16 × 9/16 4.5 114 10.3 45.8 17.5 77.7 24.5 109 31.1 138.1 0.171 0.254
Eagle Clear 95 BB 4911070 11/16 × 9/16 5.63 143 19.4 86.5 31.7 140.9 42.6 189.6 52 231.1 0.175 0.26
Eagle Red 85 CXF B/17 4924330 0.69 × 0.51 17.5 × 12.54 4.28 109 8.1 36.1 12.8 57 17.4 77.5 21.7 96.7 0.15 0.223
Eagle Ivory 85 SGT PU B/17 493040030M 0.66 × 0.60 17 × 15.56 4.28 109 20.6 91.6 31.4 139.8 41.2 183.4 49.9 222.2 0.146 0.218
Eagle Ivory 85 SGT PVC B/17 L04I85BSG 0.66 × 0.66 17 × 17.01 4.28 109 20.6 91.6 31.4 139.8 41.2 183.4 49.9 222.2 0.158 0.235
Eagle Ivory 85 SGT TPE B/17 493130030M 0.66 × 0.61 17 × 15.84 4.28 109 20.6 91.6 31.4 139.8 41.2 183.4 49.9 222.2 0.039 0.215
Eagle Green 89 SGT PVC B/17 L04G89BSG 0.66 × 0.66 17 × 17.01 4.82 122 37 164.4 56.4 251.1 73.9 328.7 89.1 396.4 0.16 0.238
Eagle Red 90 SGT PVC B/17 L04R90BSG 0.66 × 0.66 17 × 17.01 4.82 122 49.3 219.3 71 315.9 89.4 397.5 104.6 465.2 0.16 0.238
Eagle White 40D SGT PVC B/17 L04BY40BSG 0.66 × 0.66 17 × 17.01 6.96 177 27.6 122.6 47.1 209.5 64.9 288.9 80.3 357 0.154 0.229
Eagle Hyfen 95 B 5260300 21/32 × 1/2 5 127 26.9 119.6 39.1 173.8 50.2 223.3 60.7 270.1 0.131 0.196
Eagle Hyfen 95 B Cogged 5230000 21/32 × 1/2 4 102 26.9 119.6 39.1 173.8 50.2 223.3 60.7 270.1 0.131 0.196
Eagle Hyfen 85 B Ridge-Top 5299009 21/32 × 11/16 7.56 192 25.7 114.4 37 164.6 49.9 221.7 63.2 280.9 0.161 0.239
Eagle Opaque 80 B/17 L04OP80BR 21/32 × 7/16 17 × 11.5 4.53 115 11 48.8 29.7 132 44.6 198.4 54.5 242.6 0.123 0.183
Eagle Orange 85 B/17 4940067 21/32 × 7/16 17 × 11.5 4.38 115 7.1 31.6 16.9 75.2 27 120 35.5 158 0.119 0.177
Eagle Ivory 85 B/17 L04I85BR 21/32 × 7/16 17 × 11.5 4.53 115 9 39.9 27.1 120.5 43.1 191.9 55 244.8 0.118 0.175
Eagle Green 89 B/17 4940127 21/32 × 7/16 17 × 11.5 4.53 115 7 31.2 26.5 117.9 100.1 445.3 164.7 732.8 0.12 0.178
Eagle Beige 95 B/17 4940076 21/32 × 7/16 17 × 11.5 5.43 138 38.8 172.7 90.6 403 132.9 591 163.5 727.2 0.124 0.184
Eagle Beige 95 B/17 Cogged 4940072 21/32 × 7/16 17 × 11.5 4.43 113 38.8 172.7 90.6 403 132.9 591 163.5 727.2 0.124 0.184
Eagle Ivory 85 B/17 Ridge-Top L04I85BRXH 17 × 19.5 7.68 195 13.3 59 40.1 178.3 63.8 283.8 81.4 362 0.174 0.259
Eagle Green 89 B/17 Ridge-Top L04G89BRXH 17 × 19.5 7.68 195 10.2 45.4 38.5 171.4 145.5 647.3 239.5 1065.1 0.174 0.259
Eagle Hyfen 85 CXF B 5260530 0.66 × 0.51 5.89 150 25.7 114.4 37 164.6 49.9 221.7 63.2 280.9 0.141 0.21
Eagle Hyfen 85 CXR B 5260535 0.66 × 0.51 5.89 150 25.7 114.4 37 164.6 49.9 221.7 63.2 280.9 0.122 0.181
Eagle Ivory 85 SGT PU B/17 493020030M 0.60 × 0.60 17 × 15.56 5.36 136 9 39.9 27.1 120.5 43.1 191.9 55 244.8 0.146 0.218
Eagle Ivory 85 SGT PVC B/17 L04I85BRSG 0.66 × 0.66 17 × 17.01 5.36 136 9 39.9 27.1 120.5 43.1 191.9 55 244.8 0.158 0.235
Eagle Ivory 85 SGT TPE B/17 493160030M 0.66 × 0.61 17 × 15.84 5.36 136 9 39.9 27.1 120.5 43.1 191.9 55 244.8 0.144 0.215
V BELTING PRODUCTS FOR CONVEYING
Part Numbers
V Belt Guide with Mounting Channel B GB2002-5G GB2002-5S C5 0.59 1.1 0.84 0.29

V Belt Guide B NC2002 0.63 1.1 0.29
T-Max® Tensioner/Pulley Assembly

Assembly Component
Part Number Component Part Number

FS0566
Pulley VA5001
CONVEYING
C and D Cross Sections
LINK BELTING Part Number Max Product Weight Max Product Weight
PowerTwist® Bridge Top™ 0418072 C 9.0 229 815 370 275 125
PowerTwist Super Grip Top PU 0440101 0440100 C 9.0 229 650 295 220 100
PowerTwist Super Grip Top PVC 0409300 04093030 C 9.0 229 650 295 220 100
V Belting V Ribbed Ridge-Top SGT/CXF/CXR

Eagle® Orange 85 C/22 1032072 29/32 × 17/32 23 × 13.5 4.25 108 12.2 54.1 20.6 91.7 28.9 128.6 36.6 163 0.201 0.3
Eagle Clear 85 C/22 4912072 29/32 × 17/32 23 × 13.5 4.25 108 12.5 55.5 21.1 94 29.6 131.8 37.5 167 0.201 0.3
Eagle Ivory 85 C/22 L04I85C 7/8 × 9/16 22 × 14.5 4.57 116 33.9 150.6 51.7 229.8 67.8 301.7 82.1 365.4 0.194 0.289
Eagle Blue 85 C/22 L04BL85C 7/8 × 9/16 22 × 14.5 4.5 116 12 54 20.3 91.5 28.5 128.4 36.2 162.6 0.199 0.296
Eagle Green 89 C/22 L04G89C 7/8 × 9/16 22 × 14.5 5.14 131 60.8 270.3 92.8 412.9 121.5 540.5 146.5 651.9 0.197 0.293
Eagle Red 90 C/22 4999306 7/8 × 9/16 22 × 14.5 5.75 145 81.1 360.8 116.8 519.7 147.1 654.1 172.1 765.4 0.197 0.293
Eagle Beige 95 C/22 L04BE95C 7/8 × 9/16 22 × 14.5 5.7 145 49.9 222.2 74.6 332 96.4 428.9 115.5 513.6 0.204 0.303
Eagle Clear 95 C/22 4911072 29/32 × 17/32 23 × 13.5 5.31 135 22.9 102 37.4 166.2 50.3 223.7 61.3 272.7 0.206 0.307
Eagle White 40D C/22 L04BY40C 7/8 × 9/16 22 × 14.5 6.85 174 46.8 208 79.9 355.4 110.2 490 136.1 605.6 0.194 0.288
Eagle Orange 85 C/22 Ribbed 1032054 29/32 × 17/32 4.25 108 11.3 50.3 19.2 85.3 26.9 119.7 34.1 151.7 0.187 0.279
Eagle Green 89 C/22 Ridge-Top 4999514 22 × 24.5 8.68 221 85.6 380.7 130.7 581.4 171.1 761.2 206.4 917.9 0.278 0.413
Eagle Green 89 C/22 Ridge-Top L04G89CX 22 × 28.5 10.1 257 98.7 439.2 150.8 670.8 197.4 878.1 238.1 1059 0.32 0.477
Eagle Ivory 85 SGT PU C/22 493050030M 0.88 × 0.72 22 × 18.56 5.28 134 33.9 150.6 51.7 229.8 67.8 301.7 82.1 365.4 0.227 0.338
CONVEYING
Eagle Ivory 85 SGT PVC C/22 L04I85CSG 0.88 × 0.78 22 × 20.01 5.28 134 33.9 150.6 51.7 229.8 67.8 301.7 82.1 365.4 0.245 0.365
Eagle Ivory 85 SGT TPE C/22 493140030M 0.88 × 0.73 22 × 18.84 5.28 134 33.9 150.6 51.7 229.8 67.8 301.7 82.1 365.4 0.045 0.334
Eagle Green 89 SGT PVC C/22 L04G89CSG 0.88 × 0.78 22 × 20.01 5.94 151 60.8 270.3 92.8 412.9 121.5 540.5 146.5 651.9 0.248 0.37
Eagle Red 90 SGT PVC C/22 L04R90CSG 0.88 × 0.78 22 × 20.01 5.94 151 81.1 360.8 116.8 519.7 147.1 654.1 172.1 765.4 0.248 0.369
Eagle White 40D SGT PVC C/22 L04BY40CSG 0.88 × 0.78 22 × 20.01 8.59 218 46.8 208 79.9 355.4 110.2 490 136.1 605.6 0.24 0.358
Eagle Hyfen 95 C 5260400 7/8 × 5/8 6.25 159 39.8 177.2 57.9 257.6 74.4 330.8 90 400.3 0.226 0.337
Eagle Hyfen 95 C Cogged 5240000 7/8 × 5/8 5.25 133 39.8 177.2 57.9 257.6 74.4 330.8 90 400.3 0.226 0.337
Eagle Orange 85 C/22 4940068 7/8 × 9/16 22 × 14.5 5.62 145 11.7 52 27.8 123.7 44.4 197.4 58.4 260 0.196 0.291
Eagle Ivory 85 C/22 L04I85CR 7/8 × 9/16 22 × 14.5 5.71 145 14.8 65.7 44.6 198.3 71 315.7 90.5 402.7 0.194 0.289
Eagle Green 89 C/22 L04G89CR 22 × 14.5 5.71 145 11.5 51.3 43.6 193.9 164.6 732.4 270.9 1205.1 0.197 0.293
Eagle Beige 95 C/22 4940077 7/8 × 9/16 22 × 14.5 6.85 174 63.8 284 149 662.7 218.5 971.9 268.8 1195.9 0.204 0.303
Eagle Beige 95 C/22 Cogged 4940073 7/8 × 9/16 22 × 14.5 5.85 149 63.8 284 149 662.7 218.5 971.9 268.8 1195.9 0.204 0.303
Eagle Ivory 85 C/22 Ridge-Top 5299103 22 × 24.5 9.65 245 21.7 96.6 65.6 291.7 104.4 464.3 133.2 592.4 0.285 0.424
Eagle Ivory 85 C/22 Ridge-Top L04I85CRXH 22 × 28.5 11.22 285 24.4 108.5 73.7 327.7 117.3 521.6 149.6 665.4 0.32 0.477
Eagle Green 89 C/22 Ridge-Top 4999524 22 × 24.5 9.65 245 16.2 72.3 61.4 273.1 231.8 1031.3 381.5 1697 0.278 0.413
Eagle Green 89 C/22 Ridge-Top L04G89CRXH 22 × 28.5 11.22 285 18.7 83.4 70.8 315.1 267.5 1189.8 440.1 1957.8 0.32 0.477
Eagle Hyfen 85 CXF C 5260540 0.88 × 0.63 7.7 196 38 169.1 54.7 243.4 73.7 327.9 93.4 415.4 0.241 0.358
Eagle Hyfen 85 CXR C 5260545 0.88 × 0.63 7.7 196 38 169.1 54.7 243.4 73.7 327.9 93.4 415.4 0.215 0.32
Eagle Ivory 85 SGT PU C/22 493070030M 0.88 × 0.72 22 × 18.56 6.61 168 14.8 65.8 44.6 198.3 71 315.7 90.5 402.7 0.227 0.338
Eagle Ivory 85 SGT PVC C/22 L04I85CRSG 0.88 × 0.78 22 × 20.01 6.61 168 14.8 65.8 44.6 198.3 71 315.7 90.5 402.7 0.245 0.365
Eagle Ivory 85 SGT TPE C/22 493170030M 0.88 × 0.73 22 × 18.84 6.61 168 14.8 65.8 44.6 198.3 71 315.7 90.5 402.7 0.224 0.334

Part Numbers
V Belt Guide with Mounting Channel C GB2003-5G GB2003-5S C5 0.71 1.1 0.96 0.4
V Belt Guide C NC2003 0.75 1.1 0.4
* w (width) is the widest part of the belt. h (height) is the tallest part of the belt,
D Cross Section including the belting top surface.
V Belting Ribbed CXF/CXR

Eagle Orange 85 D/32 Ribbed 1032062 1-5/16 x 3/4 33.5 x 19 6 152 22.9 101.8 38.8 172.5 54.4 242 68.9 306.7 0.379 0.564
Eagle Hyfen 85 CXF D 5260550 1.25 x 0.85 10.88 276 77.1 343 111 493.6 149.5 665 189.4 842.4 0.448 0.667
Eagle Hyfen 85 CXR D 5260555 1.25 x 0.85 10.88 276 77.1 343 111 493.6 149.5 665 189.4 842.4 0.412 0.612
FLAT BELTING AND ADDITIONAL PRODUCTS FOR CONVEYING
Flat Belting
Flat Belting
Flat Flat with Guide
Eagle Orange 85 .055" × .375" 1032121 .055 × .375 0.44 11 0.6 2.6 0.9 3.9 1.1 5 1.4 6.1 0.011 0.016
Eagle Orange 85 .062" × .5" 1032126 .062 × .500 0.5 13 0.9 3.9 1.3 5.8 1.7 7.6 2.1 9.2 0.016 0.024
Eagle Orange 85 .062" × .75" † 1032210 .062 × .750 0.5 13 2.3 10.1 3.4 15.1 4.4 19.7 5.4 23.9 0.042 0.062
Eagle Orange 85 .062" × 1.5" 1032148 .062 × 1.50 0.5 13 2.6 11.6 3.9 17.4 5.1 22.7 6.2 27.6 0.048 0.072
Eagle Orange 85 .062" × 1.75" 1032155 .062 × 1.75 0.5 13 3 13.5 4.6 20.3 6 26.5 7.2 32.2 0.056 0.084
Eagle Orange 85 .062" × 2" 1032160 .062 × 2.00 0.5 13 3.5 15.5 5.2 23.2 6.8 30.3 8.3 36.8 0.064 0.096
Eagle Orange 85 .062" × 3" 1032170 .062 × 3.00 0.5 13 5.2 23.2 7.8 34.8 10.2 45.5 12.4 55.2 0.097 0.144
Eagle Orange 85 .078" × .75" 1032136 .075 × .750 0.62 16 1.6 7.3 2.4 10.9 3.2 14.2 3.9 17.3 0.03 0.045
Eagle Orange 85 .090" × 1" 1032142 .090 × 1.00 0.72 18 2.5 11.2 3.8 16.8 4.9 21.9 6 26.6 0.047 0.069
Eagle Orange 85 .090" × 1.25" 1032146 .090 × 1.25 0.72 18 3.1 14 4.7 21 6.2 27.4 7.5 33.3 0.058 0.087
Eagle Orange 85 .090" × 1.5" 1032151 .090 × 1.50 0.72 18 3.8 16.8 5.7 25.2 7.4 33 9 40 0.07 0.104
Eagle Orange 85 .090" × 2" 1032163 .090 × 2.00 0.72 18 5 22.4 7.6 33.6 9.9 44 12 53.4 0.093 0.139
Eagle Orange 85 .125" × .625" 1032133 .125 × .625 1 25 2.2 9.7 3.3 14.5 4.3 19 5.2 23 0.04 0.06
Eagle Orange 85 .125" × 1" 1032143 .125 × 1.00 1 25 3.5 15.5 5.2 23.3 6.9 30.5 8.3 37 0.065 0.096
Eagle Orange 85 .250" × .625" 1032134 .250 × .625 2 51 4.4 19.4 6.5 29 8.5 38 10.4 46.1 0.081 0.12
† Belt has a .156" radius guide.
CONVEYING
Eagle® Endurance™ Taper Edge Bands
Part Number A
COLOR Left Side* Right Side* (inches)
Blue 4938280BL 4938280BR 0.085

Red 4938281BL 4938281BR 0.075 • Long lasting, minimal stretch replacement for PVC Bands on wallboard forming lines.
Green 4938282BL 4938282BR 0.105
* As belt travels toward you

• Fit and forget installation reduces labor and downtime costs.
• Thermal splicing for a tough, seamless, flexible joint that maintains a perfect indentation.
Eagle Endurance Welding Kit

COLOR Part Number Voltage Plug
Blue 5700301 115v US

Red 5700304 115v US
Green 5700305 115v US
Blue 5700306 240v UK
Red 5700307 240v UK
Green 5700308 240v UK
Kit includes: Platen Assembly, Controller, Cutting Shears,
Finger Splice Template, Instructional CD
Taper Edge Band Return Roller

Part Number
• Prevents surface scoring due to Eagle Endurance Taper Edge Band
Bracket and Roller Assembly DA0041 rubbing against worn return support brackets.
Roller FX0395
• Easy to install mounting bracket with hand knob for quick
adjustment and release.
• Solid polymer plain bearing allows low-friction rotation.
ADDITIONAL PRODUCTS FOR CONVEYING
Eagle® Welding Kits
Butt Welding Kit & Components - 115 V Part Numbers Butt Welding Kit & Components – 240 V Part Numbers
Butt Welding Kit 115 V (Large Clamp) 5700200 Butt Welding Kit 240 V (Large Clamp) L04FULLWELD240V
Mini Butt Welding Kit 115 V (Mini Clamp) 5700231 Mini Butt Welding Kit 240 V (Mini Clamp) L04MINIWELD240V
Butt Welding Clamp 5700201 Butt Welder Clamp 5700201
Mini Clamp 5700227 Mini Clamp 5700227
Hot Knife 115 V with holder and 2" blade 5700228 Hot Knife 240 V L04HKNIFE240
Double Iron Hot Knife 115 V with holder and 3" blade 5700220 Cutting Shears L04SHEARS
Hot Knife Holder 5700202 Flash Cutter L04FCUTTER
Hot Knife Blade – 2" 5700233 Hot Knife Blade – 2" L04S
Hot Knife Blade – 3" (Use with 5700220) 5700218 Case (Large Clamp) L04CASEBKST
Cutting Shears 5700153 Case (Mini Clamp) L04CASEBLM Mini Clamp
Flash Cutter 1448000
Clamping Plate (2 pcs) 5700208
Flat/V belt adapter Plate (2 pcs) 5700209
Black Knurled Knob (5 pcs) 5700212
Case 5700203
Kit Includes: Hot Knife, Large Clamp or Mini Clamp, Flash Cutters,
Cutting Shears, Carrying Case
Eagle Freestyle® Cordless Welding Part Numbers
Freestyle Welding Kit 5700539

CONVEYING
Freestyle Welder 5700537

Freestyle Welder Blade Assembly 5700366
Freestyle Welder End Cap 5700367
Blade Replacement Tape 10/pk 5700542
Pack of 2 D cell NiMH batteries 5700541
Cutting Shears 5700153
Flash Cutter 1448000
Kit includes: Welder, Flat Plate Adapters, Professional Battery Charger,

(4) D Cell NiMH Batteries, Blade Release Tape, Cutting Shears, Flash
Cutters, Tool Bag
Overlap Welding Kit & Components Part Numbers Overlap Welding Kit & Components Part Numbers
Overlap Welding Kit 115V 5700160K 7mm Die 5700602

Overlap Welding Kit 240V 5700161K 8mm Die 5700603
Flash Cutter 5700152 9mm Die 5700604
Case 5700164 10mm Die 5700605
Temperature Controller w/Control Box 115 V 5700300 12mm Die 5700606
Temperature Controller w/Control Box 240 V 5700310 18mm Die 5700608
Heating Tip (Z Block) 5700325 20mm Die 5700620
Thumb Nuts 5700330 Z/10 Die Set 5700610
Hold Down Pin 5700340 A Hyfen Die Set 5700440
Thermocouple Wire 5700350 A/13 Die Set 5700611
Thermocouple Connector 5700355 A Ridge–Top Die Set 5700470
Heating Element, Power Cord and Plug 115 V 5700360 B Hyfen Die Set 5700453
Heating Element, Power Cord and Plug 240 V 5700361 B/17 Die Set 5700612
Plug Adapter – UK to EU 5700351 B Ridge-Top Die Set 5700490
Spring 5700380 C Hyfen Die Set 5700457
Heating Assembly Knob 5700390 C/22 Die Set 5700613
1/4" and 5/16" Die Set 5700400 D Hyfen Die Set 5700460
3/8" and 1/2" Die Set 5700410 A Die Set for Hyfen CXF and CXR 5700480
9/16", 5/8" and 16mm Die Set 5700420 B Die Set for Hyfen CXF and CXR 5700472
3/4" and 19mm Die 5700430 C Die Set for Hyfen CXF and CXR 5700476
5mm Die 5700600 D Die Set for Hyfen CXF and CXR 5700474
6mm Die 5700601
Kit Includes: Welder, Control Box, Set of Dies, Flash Cutters, Cutting Shears, Carrying Case
Trackstar® Flat Belt Guides
Part Numbers
Galvanized Stainless Steel Channel
Belt Width Channel Channel Type A B C D H
3/4" GB3000-5G GB3000-5S C5 0.71 1.10 1.10 0.95 0.25

Flat Belt Guide with Mounting Channel
1" GB3001-5G GB3001-5S C5 0.71 1.10 1.34 0.95 0.25
Part Numbers
Channel Channel Channel Type A B D
GR2001-3G GR2001-3S GR2001-3A C3 0.39 0.79 0.60

Flat Guide with Mounting Channel GR2002-5G GR2002-5S C5 0.39 1.10 0.64
GR2003-9G GR2003-9S C9 0.59 1.50 0.96
Trackstar Mounting Channels

Installation is simple with standard 120" C channels in galvanized steel, 304 stainless steel, or
anodized aluminum (C3 only). Either tack weld or bolt into place with optional mounting holes.
Part Numbers Material Mounting Holes Centers
C3 Mounting Channel MC 0500 Anodized Aluminum None –

MC 0501 Anodized Aluminum .20 Diameter 12 inch
C3
MC 1000 Galvanized Steel None –
MC 1001 Galvanized Steel .20 Diameter 12 inch
MC 1500 #304 Stainless Steel None –
MC 1501 #304 Stainless Steel .20 Diameter 12 inch
CONVEYING
C5 C5 Mounting Channel MC 2000 Galvanized Steel None –
C9 Mounting Channel MC 3000 Galvanized Steel None –

C9 MC 3001 Galvanized Steel .20 Diameter 12 inch
C10 Mounting Channel MC 4001 Galvanized Steel .20 Diameter 12 inch

C10 MC 4501 #304 Stainless Steel .20 Diameter 12 inch

C11 Mounting Channel MC 5000 Galvanized Steel None –
C11
Trackstar Guide Rails

The “C” channel design features a two-piece construction for quick and easy replacement of UHMW inserts.
“C” channel guide rails are available in Black or FDA/USDA approved White.
Part Numbers
Profile/Color Galvanized Channel Stainless Steel Channel Aluminum Channel
C3 Guide Rail Crowned/Black GR1000-3G120.00 GR1000-3S120.00 GR1000-3A120.00

Crowned/White GR1001-3G120.00 GR1001-3S120.00 GR1001-3A120.00
Flat/Black GR1100-3G120.00 GR1100-3S120.00 GR1100-3A120.00
Crowned Flat
Flat/White GR1101-3G120.00 GR1101-3S120.00 GR1101-3A120.00
Trackstar® Single Chain Guide with Mounting Channel

Part Number
ANSI Chain
Galvanized Stainless Steel Aluminum Channel Type A B C D E
25-1 GC1025-3G GC1025-3S GC1025-3A C3 0.59 0.79 0.86 0.80 0.79
35-1 GC1035-3G GC1035-3S GC1035-3A C3 0.59 0.79 0.90 0.80 0.79
40-1 GC1040-3G GC1040-3S GC1040-3A C3 0.59 0.79 0.95 0.80 0.79
50-1 GC1050-3G GC1050-3S GC1050-3A C3 0.59 0.79 1.00 0.80 0.79
60-1 GC1060-5G GC1060-5S C5 0.59 1.10 1.06 0.83 1.10
80-1 GC1080-5G GC1080-5S C5 0.71 1.10 1.26 0.95 1.34
81X GC1081-5G GC1081-5S C5 1.25 1.10 1.95 1.50 1.75
100-1 GC1100-9G GC1100-9S C9 0.79 1.50 1.54 1.16 1.75
120-1 GC1120-9G GC1120-9S C9 0.79 1.50 1.60 1.16 2.12
Trackstar Single Chain Guide

ANSI Chain Part Number A B C
25-1 NC1025 0.59 0.79 0.66
35-1 NC1035 0.59 0.79 0.69
40-1 NC1040 0.59 0.79 0.75
50-1 NC1050 0.59 0.79 0.79
60-1 NC1060 0.59 1.10 0.82
80-1 NC1080 0.71 1.34 1.02
81X NC1081 1.00 1.75 1.45
100-1 NC1100 1.00 1.61 1.38
120-1 NC1120 1.25 2.01 1.69
140-1 NC1140 1.50 2.17 2.00
160-1 NC1160 1.50 2.61 2.06
180-1 NC1180 1.50 2.88 2.20
CONVEYING
Trackstar Double Chain Guide with Mounting Channel

Part Number
ANSI Chain
25-2 GC2025-3G GC2025-3S GC2025-3A C3 0.44 0.79 0.72 0.65 0.79
35-2 GC2035-3G GC2035-3S GC2035-3A C3 0.59 0.79 0.89 0.80 0.57*
40-2 GC2040-3G GC2040-3S GC2040-3A C3 0.59 0.79 0.95 0.80 0.85
50-2 GC2050-5G GC2050-5S C5 0.59 1.10 1.03 0.84 1.06
60-2 GC2060-5G GC2060-5S C5 0.59 1.10 1.06 0.84 1.34
80-2 GC2080-9G GC2080-9S C9 0.79 1.50 1.47 1.16 1.75
100-2 GC2100-9G GC2100-9S C9 0.79 1.50 1.54 1.16 2.12
Trackstar Double Chain Guide

ANSI Chain Part Number A B C
25-2 NC2025 0.59 0.78 0.66
35-2 NC2035 0.59 0.78 0.69
40-2 NC2040 0.85 0.85 1.00
50-2 NC2050 1.07 1.07 1.27
60-2 NC2060 1.34 1.34 1.57
80-2 NC2080 1.75 1.75 2.06
Trackstar Single Chain Guide with Mounting Channel

Part Number
ANSI Chain
Galvanized Stainless Steel Aluminum Channel Type A B D
25-1 GC3525-3G GC3525-3S GC3525-3A C3 0.59 0.79 0.80
35-1 GC3535-3G GC3535-3S GC3535-3A C3 0.59 0.79 0.80
40-1 GC3540-3G GC3540-3S GC3540-3A C3 0.59 0.79 0.80
50-1 GC3550-5G GC3550-5S C5 0.71 1.10 0.96
60-1 GC3560-5G GC3560-5S C5 0.71 1.10 0.96
80-1 GC3580-9G GC3580-9S C9 0.79 1.50 1.16

ANSI Chain Part Number A B
25-1 NC3525 0.59 0.78
35-1 NC3535 0.59 0.78
40-1 NC3540 0.59 0.78
50-1 NC3550 0.71 1.10
60-1 NC3560 0.71 1.10
80-1 NC3580 0.79 1.50
Trackstar Guides are supplied in 120" standard lengths.

Dimensions are in inches and are for reference only.
Trackstar® Single Chain Guide with Mounting Channel

Part Number
ANSI Chain
Galvanized Stainless Steel Aluminum Channel Type A B C D L
25-1 GC3625-3G GC3625-3S GC3625-3A C3 0.80 0.79 0.15 1.01 0.11
35-1 GC3635-3G GC3635-3S GC3635-3A C3 0.80 0.79 0.22 1.01 0.17
40-1 GC3640-5G GC3640-5S C5 1.01 1.10 0.33 1.25 0.29
50-1 GC3650-9G GC3650-9S C9 1.24 1.50 0.42 1.61 0.35
60-1 GC3660-9G GC3660-9S C9 1.66 1.50 0.50 2.03 0.47
80-1 GC3680-9G GC3680-9S C9 2.26 1.50 0.65 2.63 0.60

ANSI Chain Part Number A B L
25-1 NC3625 0.88 0.79 0.11
35-1 NC3635 0.88 0.79 0.17
40-1 NC3640 1.05 1.10 0.29
50-1 NC3650 1.43 1.50 0.35
60-1 NC3660 1.85 1.50 0.47
CONVEYING
Part Number
ANSI Chain
Galvanized Stainless Steel Channel Type A B C D
25-1 GS1025-9G GS1025-9S C9 0.11 1.50 0.15 0.71
35-1 GS1035-0G GS1035-0S C10 0.17 1.19 0.22 0.94
40-1 GS1040-0G GS1040-0S C10 0.29 1.19 0.33 0.94
50-1 GS1050-0G GS1050-0S C10 0.35 1.19 0.42 0.94
60-1 GS1060-0G GS1060-0S C10 0.47 1.19 0.49 1.05
80-1 GS1080-1G GS1080-1S C11 0.60 1.77 0.65 1.58
100-1 GS1100-1G GS1100-1S C11 0.73 1.77 0.78 1.58

Part Number
ANSI Chain
35-1 GT1035-3G GT1035-3S GT1035-3A C3 0.67 0.79 0.71 1.24 0.57
40-1 GT1040-3G GT1040-3S GT1040-3A C3 0.59 0.79 0.65 1.16 0.57
50-1 GT1050-3G GT1050-3S GT1050-3A C3 0.77 0.79 0.62 1.46 0.69
60-1 GT1060-5G GT1060-5S C5 0.89 1.11 0.87 1.60 0.70
Chain Breakers Chain Pullers

Part Number Description Part Number Description
5810100 #1 Chain Breaker 25-60 Chain 5800350 #35 Chain Puller 35 - 60 Chain
Trackstar Guides are supplied in 120" standard lengths.

Dimensions are in inches and are for reference only.
Double Pitch Chain Guides T-Max® Tensioner/Sprocket Assemblies

Dimensions (inches) Assembly Component Rotation Force
Part Number Chain Part Number Component Part Number (Degrees) (lbs)
Number A B C D E F
#35 Chain
STYLE A
15 16
DPA2040 2040 0.31 1.25 0.19 - 0.88 - Tensioner RT1001
FS0142 30 23
DPA2050 2050 0.38 1.25 0.22 - 1.00 - Sprocket CS3502
45 30
DPA2060 2060 0.38 1.50 0.19 - 1.25 -
15 10
DPA2080 2080 0.50 2.00 0.25 - 1.56 - Tensioner RT1601-L
FS0658 30 13
DPA2100 2100 0.63 2.25 0.31 - 1.88 - Sprocket CS3502
Style A 45 16
DPA2120 2120 0.63 2.75 0.25 - 2.25 -
#40 Chain
DPA2081 81X 1.00 3.00 0.38 - 2.50 -
15 16
STYLE B Tensioner RT1001
FS0651 30 23
DPB2040 2040 0.31 1.25 0.19 - 0.88 - Sprocket CS4002
45 30
DPB2050 2050 0.38 1.25 0.22 - 1.00 -
15 20
DPB2060 2060 0.38 1.50 0.19 - 1.25 - Tensioner RT1601
FS0652 25 23
DPB2080 2080 0.50 2.00 0.25 - 1.56 - Sprocket CS4002
Style B 35 26
DPB2100 2100 0.63 2.25 0.31 - 1.88 -
15 10
DPB2120 2120 0.63 2.75 0.25 - 2.25 - Tensioner RT1601-L
FS0644 30 13
STYLE C Sprocket CS4002
45 16
DPC2040 2040 0.31 1.00 0.14 0.08 0.69 0.25
DPC2050 2050 0.38 1.25 0.19 0.10 0.81 0.31 Tensioner RT3001
FS0557 0 - 70 0 - 42
Sprocket CS4002
DPC2060 2060 0.50 1.50 0.21 0.12 1.13 0.44
#50 Chain
DPC2080 2080 0.50 2.00 0.25 0.13 1.44 0.56
15 16
Style C STYLE D Tensioner RT1001
FS0653 30 23
DPD2040 2040 0.31 1.00 0.08 - - 0.25 Sprocket CS5002
CONVEYING
45 30
DPD2050 2050 0.31 1.25 0.10 - - 0.31
15 20
DPD2060 2060 0.31 1.25 0.12 - - 0.44 Tensioner RT1601
FS0654 25 23
DPD2080 2080 0.38 1.50 0.13 - - 0.56 Sprocket CS5002
35 26
DPD2100 2100 0.50 2.00 0.21 - - 0.69
15 10
DPD2120 2120 0.50 2.25 0.26 - - 0.94 Tensioner RT1601-L
Style D FS0659 30 13
STYLE E Sprocket CS5002
45 16
DPE2040 2040 0.31 1.00 0.08 - - 0.25
DPE2050 2050 0.31 1.25 0.10 - - 0.31 Tensioner RT3001
FS0567 0 - 70 0 - 42
Sprocket CS5002
DPE2060 2060 0.31 1.25 0.12 - - 0.44
#60 Chain
DPE2080 2080 0.38 1.50 0.13 - - 0.56
15 16
DPE2100 2100 0.50 2.00 0.21 - - 0.69 Tensioner RT1001
Style E FS0655 30 23
DPE2120 2120 0.50 2.25 0.26 - - 0.94 Sprocket CS6002
45 30
15 20
Tensioner RT1601
FS0656 25 23
Sprocket CS6002
35 26
Tensioner RT3001
FS0568 0 - 70 0 - 42
Sprocket CS6002
#80 Chain
15 16
Tensioner RT1001
FS0657 30 23
Sprocket CS8002
45 30
Fenner Drives has several tensioner/sprocket assemblies not shown here.

Contact us for availability.
T-Max® Chain Tensioners

CT Series: CT1100, CT2100 & CT3100† Common Dimensions
Travel Force ‡ Dimensions*
Part Number Series
(in) (mm) (lbs) (N) A B C D E G H K
1100-L 1.05 27 5 - 30 22 - 133 INCH
1100 1.05 27 15 - 40 67 - 178 CT1100 2.31 0.98 1.82 2.91 5.6 0.41 5.5 0.46
2100 1.20 31 20 - 60 89 - 267 CT2100 2.95 1.18 2.27 3.52 6.4 0.49 5.5 0.45
3100 1.50 38 45 - 100 200 - 445 CT3100 3.54 1.38 2.91 4.25 7.5 0.53 5.5 0.49
3100-H 1.00 25 30 - 200 134 - 890 METRIC
3196 1.50 - 45 - 100 - CT1100 59 25 46 74 142 10 140 11
R = 3.50" (89mm) CT2100 75 30 58 89 163 12 140 11
CT3100 90 35 74 108 191 13 140 12
Single Chain Double Chain Triple Chain

Part Number Chain M* Part Number Chain N* Part Number Chain O*
INCH
CT1101-L #35 0.79 CT1103-L #35 0.79 CT1105-L #35 0.98
CT1101 #35 0.79 CT1103 #35 0.79 CT1105 #35 0.98
CT1102 #40 0.79 CT1104 #40 0.79 CT1106 #40 1.37
CT2101 #50 0.87 CT2103 #50 0.98 CT2105 #50 1.75
CT2102 #60 0.87 CT2104 #60 1.37
CT3101 #80 0.98 CT3103 #80 1.75
CT3102 #100 0.98
CT3102-H #100 0.98
CT3196 #81X 2.15
METRIC
CT1111-L 06B 20 CT1113-L 06B 20
CT1111 06B 20 CT1113 06B 20
CONVEYING
CT1112 08B 20 CT1114 08B 20
CT2111 10B 22 CT2112 10B 25
CT2109 12B 22 CT2110 12B 35
CT3111 16B 25 CT3113 16B 44
CT3112 20B 25
CT3112-H 20B 25
Single Double Triple
CT Series: CT1200, CT2200 & CT3200† Common Dimensions

Travel Force ‡ Dimensions*
Part Number Series
(in) (mm) (lbs) (N) A B C D E G H K
1200-L 1.05 27 5 - 30 22 - 133 INCH
1200 1.05 27 15 - 40 67 - 178 CT1200 2.31 1 1.82 2.91 5.47 0.41 3 0.46
2200 1.20 31 20 - 60 89 - 267 CT2200 2.95 1 2.27 3.52 6.47 0.49 3.5 0.45
3200 1.50 38 45 - 100 200 - 445 CT3200 3.54 1 2.91 4.25 7.8 0.53 4 0.49
3200-H 1.00 25 30 - 200 134 - 890 METRIC
CT1200 59 25 46 74 139 10 76 11
CT2200 75 30 58 89 164 12 89 11
R=
CT3200 90 35 74 108 198 13 102 12
CT1200 1.50" (38mm)
CT2200 1.75" (44mm)
Single Chain Double Chain Triple Chain
CT3200 2.00" (51mm)
Part Number Chain M* Part Number Chain N* Part Number Chain O*
INCH
CT1201-L #35 1 CT1203-L #35 0.79 CT1205-L #35 0.98
CT1201 #35 1 CT1203 #35 0.79 CT1205 #35 0.98
CT1202 #40 1 CT1204 #40 0.79 CT1206 #40 1.37
CT2201 #50 1 CT2203 #50 0.98 CT2205 #50 1.75
CT2202 #60 1 CT2204 #60 1.37
CT3201 #80 0.98 CT3203 #80 1.75
CT3202 #100 0.98
CT3202-H #100 0.98
METRIC
CT1211-L 06B 20 CT1213-L 06B 20
CT1211 06B 20 CT1213 06B 20
CT1212 08B 20 CT1214 08B 20
CT2208 10B 22 CT2209 10B 25
CT2206 12B 22 CT2207 12B 35
CT3211 16B 25 CT3213 16B 44
CT3212 20B 25
CT3212-H 20B 25
Single Double Triple * Inch dimensions are in inches; metric dimensions are in millimeters.
† These tensioners can be used on chain sizes up to ANSI #160 or BS/DIN #24B.
Contact Fenner Drives Applications Engineering group at AE@fennerdrives.com for head dimensions.
‡ All forces are nominal.
ENGINEERING DATA — IMPERIAL PULLEY SECTIONS
Round Belting Pulley

Size
Pulley Diameter
(inches)
Groove
Angle
Round
Belt
Dimensions (inches)
w a b
Round belts are commonly run in pulleys with a round 3/16"
2L Under 1.50" 32° .240 .010 .084
groove; see Figure 1a. In the absence of round groove 3/16"
2L 1.50" to 1.99" O.D. 34° .243 .016 .078
pulleys, they can also be used in V-groove pulleys 1/4" .243 .153 –.028
(Figure 1b). The table at right shows the dimensional 2L 2.00" to 2.50" O.D. 36° 3/16" .246 .020 .074
data for a round belt used in a V-groove pulley. 1/4" .246 .151 –.026
2L Over 2.50" O.D. 38° 3/16" .250 .020 .074
1/4" .250 .146 –.021
3L Under 2.20" O.D. 32° 1/4" .360 –.049 .174
5/16" .360 .094 .062
3L 2.20" to 3.19" O.D. 34° 1/4" .364 –.043 .168
5/16" .364 .094 .062
3L 3.20" to 4.20" O.D. 36° 1/4" .368 –.037 .062
5/16" .368 .095 .061
3L Over 4.20" O.D. 38° 1/4" .372 –.031 .156
5/16" .372 .095 .061
A/13 2.60" to 5.40" D.D. 34° 5/16" .494 –.118 .274
Figure 1a 3/8" .494 .019 .168
1/2" .494 .297 –.047
A/13 Over 5.40" D.D. 38° 5/16" .504 –.097 .253
3/8" .504 .030 .157
1/2" .504 .286 .036
B/17 4.60" to 7.00" D.D. 34° 1/2" .637 .062 .188
CONVEYING
9/16" .637 .199 .082

5/8" .637 .340 –.027
B/17 Over 7.00" D.D. 38° 1/2" .650 .074 .176
9/16" .650 .200 .081
5/8" .650 .331 –.018
C/22 7.00" to 7.99" D.D. 34° 5/8" .879 –.056 .369
3/4" .879 .218 .157
C/22 8.00" to 12.00" D.D. 36° 5/8" .887 –.041 .354
Figure 1b
3/4" .887 .222 .153
C/22 Over 12.00" D.D. 38° 5/8" .895 –.027 .340
3/4" .895 .226 .149
Note: above dimensions are belt fit in groove under no tension.

Dimensions in inches unless otherwise indicated.
V Belting Cross Datum Groove bg hg min Sg Se

Section Diameter Range Angle
(inches) (inches) (inches) (inches)
V belts in “classical” A, B, C, D and light duty 3L cross
Up thru 5.4" 34° ±0.33° .494 +.090
sections are designed to fit RMA compliant pulleys A/13
Over 5.4" 38° ±0.33° .504
±.005 .460 .625 ± .025 .375
–.062
as per the groove details illustrated in Figure 2. Up thru 7.0" 34° ±0.33° .637 +.120
B/17 ±.006 .550 .750 ± .025 .500
Over 7.0" 38° ±0.33° .650 –.065
Up thru 7.99" 34° ±0.33° .879
+.160
C/22 8.0" thru12.0" 36° ±0.33° .887 ±.007 .750 1.000 ± .025 .688
–.070
Over 12.0" 38° ±0.33° .895
Up thru 12.99" 34° ±0.33° 1.259
+.220
D/32 13.0" thru 17.0" 36° ±0.33° 1.271 ±.008 1.020 1.438 ± .025 .875
–.080
Over 17.0" 38° ±0.33° 1.283
2.2" thru 3.1" 34° ±0.33°
+.062
3L 3.2" thru 4.2" 36° ±0.33° .364 ±.005 .406 .500 ± .025 .313
– .032
Over 4.2" 38° ±0.33°
Figure 2 Dimensions in inches unless otherwise indicated.
Flat Belting
All flat belts have a natural tendency to move laterally. Therefore a
flat or straight pulley is not recommended, as the belt would walk off
the pulley. To keep the belt in the center of the pulley it must have a
crown. Figure 3a illustrates a round crown and is the preferred method.
A modified round crown as illustrated in Figure 3b is also acceptable.
A flat pulley with guide flanges (Figure 3c) is not recommended. Even
with the guide flanges the belt will move laterally and potentially could
climb up onto them.
Figure 3a Figure 3b Figure 3c
ENGINEERING DATA — METRIC PULLEY SECTIONS
Round Belting
Dimensions (mm)
Round belts are commonly run in pulleys with a round Pulley
Size
Pulley Diameter
(mm)
Groove
Angle
Round
Belt
groove; see Figure 1a. In the absence of round groove w a b
pulleys, they can also be used in V-groove pulleys Z/10 Up thru 80mm 34° 7 9.7 -0.39 3.89
(Figure 1b). The table at right shows the dimensional 8 9.7 1.82 2.18
data for a round belt used in a V-groove pulley. 9.5 9.7 5.14 -0.39
Z/10 Over 80mm 38° 7 9.7 0.17 3.34
8 9.7 2.19 1.81
9.5 9.7 5.25 -0.50
A/13 Up thru 118mm 34° 9.5 12.7 0.23 4.52
10 12.7 1.33 3.67
12 12.7 5.75 0.25
A/13 Over 118mm 38° 9.5 12.7 0.90 3.85
10 12.7 1.91 3.09
12 12.7 5.98 0.02
B/17 Up thru 190mm 34° 12 16.3 -0.14 6.14
15 16.3 6.50 1.00
Figure 1a 16 16.3 8.71 -0.71
B/17 Over 190mm 38° 12 16.3 0.76 5.24
15 16.3 6.87 0.63
16 16.3 8.90 -0.90
C/22 Up thru 315mm 34° 20 22 8.22 1.78
C/22 Over 315mm 38° 20 22 9.00 1.23
CONVEYING
Note: above dimensions are belt fit in groove under no tension.
Dimensions in millimeters unless otherwise indicated.
Figure 1b
V Belting Cross Datum Groove bg hg Min Sg Se

Section Diameter Range Angle
(mm) (mm) (mm) (mm)
V belts in “classical” Z/10, A/13, B/17, C/22 and D/32
Up thru 80mm 34° ±1°
cross sections are designed to fit ISO and DIN 2215 Z/10
Over 80mm 38° ±1°
9.7 11 12 ±0.3 8 ±0.6
compliant pulleys as per the groove details illustrated Up thru 118mm 34° ±1°
A/13 12.7 14 15 ±0.3 10 ±0.6
in Figure 2. Over 118mm 38° ±1°
Up thru 190mm 34° ±1°
B/17 16.3 18 19 ±0.4 12.5 ±0.8
Over 190mm 38° ±1°
Up thru 315mm 34° ±1°
C/22 22 24 25.5 ±0.5 17 ±1.0
Over 315mm 38° ±30’
Up thru 500mm 36° ±30’
D/32 32 28 37 ±0.6 24 ±2.0
Over 500mm 38° ±30’
Dimensions in millimeters unless otherwise indicated.
Figure 2
Flat Belting
All flat belts have a natural tendency to move laterally. Therefore a
flat or straight pulley is not recommended, as the belt would walk off
the pulley. To keep the belt in the center of the pulley it must have a
crown. Figure 3a illustrates a round crown and is the preferred method.
A modified round crown as illustrated in Figure 3b is also acceptable.
A flat pulley with guide flanges (Figure 3c) is not recommended. Even
with the guide flanges the belt will move laterally and potentially could
climb up onto them.
Figure 3a Figure 3b Figure 3c
ENGINEERING DATA – CONVEYING PRODUCTS
Belt Installation Tension

All belts require a certain amount of tension to function properly in the application. The specific installation tension is determined from several factors including
belt type, construction and working load. Belt details are in the Technical Data section of this catalog and working load is derived from your application.
Non-Reinforced Belting: When non-reinforced belting is stretched and released, elasticity is the property that brings the material back to its original shape. This
“memory” is what gives our non-reinforced belting its self-tensioning properties. When a non-reinforced belt is first installed (stretched) the material does not return
to 100% of its original length and continues to lose elasticity over its life span. This loss in elasticity is evident as tension decay. To overcome tension decay effects, a
non-reinforced belt requires a relatively high install tension. Installation tensions ranging from 6% to 10% will normally be sufficient for most applications. If higher
tensions are required, the application may exceed the belt’s load capacity.
Reinforced Belting: Reinforced belts contain a reinforcing tensile member which increases the belt’s modulus of elasticity. This reduces the belt’s ability to stretch and
minimizes tension decay. This allows a reinforced belt to carry a greater load than a non-reinforced belt. Since an endless reinforced belt is essentially a fixed length,
it cannot be stretched on like a non-reinforced belt. Consequently, reinforced belts require a mechanical take-up mechanism to apply the appropriate installation
tension as well as accommodating any eventual small amount of tension decay that may occur. This mechanism should accommodate at least 4% of the belt’s length.
Belt Installation Length

In this section, we will refer to two different lengths that are defined as follows:
1. Reference Length: The length determined by taking a measuring tape and following the path of the belt around all of the pulleys, or through computer
aided design (CAD) techniques. This length may also be obtained from the equation below. Take up mechanisms should be adjusted to the minimum
position to allow for maximum adjustment of the belt prior to taking or calculating length. Note: this equation applies to two-pulley drives only.
2 where: L = reference length
L = 2C + π2 (D + d) + (D4C
- d)
C = center of pulley shaft to center of pulley shaft distance
D = pitch diameter of large pulley
d = pitch diameter of small pulley
CONVEYING
2. Install Length: The length the belt is made to prior to welding or joining.
Apply the following formulas to determine the Install Length from Reference Length:
Butt weld non-reinforced:

Install Length = Reference Length ÷ (1 + % tension) Install Length = 44" ÷ (1 + 8%) Install Length = 1120mm ÷ (1 + 8%)
Example: Reference Length for a non-reinforced belt is 44" (1120mm), = 44" ÷ 1.08 = 1120mm ÷ 1.08
requires 8% tension and will be butt welded. Install Length is calculated on right. = 40.7" = 1037mm
Overlap weld reinforced: Install Length = Reference Length + 1.5" (38mm) Install Length = 44" + 1.5" Install Length = 1120mm + 38mm
Example: Reference Length for a reinforced belt is 44" (1120mm) and will be = 45.5" = 1158mm
overlap welded. The overlap weld consumes 1.5" (38mm) of belt length.
Install Length is calculated on right.
Butt weld reinforced: Install Length = Reference Length Install Length = 44" Install Length = 1120mm
Example: Reference Length for a reinforced belt is 44" (1120mm) and will be
butt welded. The weld consumes a negligible amount of belt length, consequently,
Install Length and Reference Length are the same. Install Length is calculated on right.
Link Belting: Install length = Reference Length minus (1 - 2%) Install Length = 44" - (44 x .02) Install Length = 1120mm - (1120 x .02)
Example: Reference Length for a link belt is 44" (1120mm). = 44" - 0.88" = 1120mm - 22.40
Install Length removing 2% is calculated on right. = 43.12" = 1097.60mm
Remove links to get as close as possible to Install Length.
Temperature
The temperature range of polyurethane belting is determined by the thermoplastic resin. Like all thermoplastic resins its physical properties change with
changes in temperature. At higher temperatures the material will soften, lose strength and can elongate excessively to the point of premature failure. At
lower temperatures the material will become more brittle and stiff which can result in cracking. The temperature ranges are for guidance and listed under
each individual belt type in the Material Properties section.
Minimum Pulley Diameter

The most common serious mistake in designing belt drives is the selection of a pulley diameter that is too small. In most cases, non-reinforced belts can operate on
smaller diameter pulleys than belts with a reinforcing tensile member. Reinforced belts require a larger pulley diameter to prevent premature flex fatigue failure of
the tensile member. Listed under each individual belt type’s technical data is the recommended minimum pulley diameter. Smaller diameters can be used only if a
reduction in belt service life is acceptable.
Engineering Data — Selection Procedure, Conveying

1. Refer to the Technical Data chart for the belt material and cross section selected.
2. Use the following formula that meets your application requirements (Note: if belt supported by rollers use .17 for µ):
a. Horizontal Transport with Slider Bed Where:
Te = Wt × µ + Bwt Te = Effective Tension
Wt = Total Weight on Conveyor
b. Horizontal Transport with Slider Bed and Product Accumulation
C = Conveyor Center Distance
Te = Wt × µ + Bwt + Awt
Bwt = Belt weight/unit length × C
c. Incline or Decline Transport with Slider Bed Awt = Accumulating weight × µ´
Te = Wt × (Ht + µ × C2 + Ht2 ) + Bwt (where µ´ is the COF between belt and product)
C Ht = Incline or decline height
µ = COF on slider bed material from chart
d. Incline or Decline Transport with Slider Bed and Product Accumulation
Te = Wt × (Ht + µ × C2 + Ht2 ) + Bwt + Awt
C
3. Determine Tight Tension (T1).

Flat and round belts: T1 = Te × 2
V belts: T1 = Te × 1.25
4. Refer to the Technical Data chart for the material and cross section selected and compare T1 to the Working Load at maximum % tension. If only
one belt is desired, T1 may not be greater than the Working Load at maximum % tension. If more than one belt is required, divide T1 by the
Working Load at maximum % tension to arrive at number of belts. Round up to the nearest whole number of belts.
5. Find load per belt by dividing T1 by number of belts. From the Technical Data chart, determine the percent installed tension for the load per belt.
CONVEYING
To determine the required belt length, please refer to the “Belt Installation Length” section on the previous page.
Engineering Data — Selection Example


Color Number (in) (mm) (in) (mm) (lbs) (N) (lbs) (N) (lbs) (N) (lbs) (N) lbs/ft kg/m
Eagle® Orange 85 L04OG856M 6 1.89 48 1.7 7.7 2.7 11.8 3.5 15.8 4.4 19.4 0.023 0.034
Eagle Orange 85 1032008 1/4 6.3 2 51 1.9 8.6 3 13.3 4 17.7 4.9 21.9 0.026 0.038
Coefficient of Friction Contact Temperature Range
NON-REINFORCED
Product Hardness FDA Compliant Stainless Steel Steel UHMW °F °C
Eagle Orange 85 85A Yes 0.70 0.60 0.45 -22 to +150 -30 to +66
Example 1 Example 2
Type of belt being considered = Eagle Orange 85 in ¼" round Eagle Orange 85 in 6mm round
Head-to-tail center distance (C) = 10 feet Head-to-tail center distance (C) = 3 meters
Incline or decline = none Incline or decline = none
Product accumulation on belt(s)? = no Product accumulation on belt(s)? = no
Total weight on belt(s) = 15 lbs. Total weight on belt(s) = 6 kg
Type of belt support = UHMW slider bed Type of belt support = UHMW slider bed
2. Horizontal Transport with Slider Bed. 2. Horizontal Transport with Slider Bed.
Since the belt will run in UHMW slider bed the COF(µ) of .45 is used Since the belt will run in UHMW slider bed the COF(µ) of .45 is used
from Technical Data chart. From the chart the belt weight is .026 lbs/ft from Technical Data chart. From the chart the belt weight is .034 kgs/m
giving a total belt weight of .26 lbs (.026 × 10'). giving a total belt weight of .102 kg (.034 × 3m).
Te = 15 lbs × .45 + .26 = 7.01 Te = 6 kg × .45 + .102 = 2.802 kg
3. Determine Tight Tension (T1). 3. Determine Tight Tension (T1).

round belts T1 = 7.01 × 2 = 14.02 round belts T1 = 2.802 × 2 = 5.604kg = 54.98 Newtons (5.604 × 9.81)
4. Refer to the Technical Data chart for the material and cross section 4. Refer to the Technical Data chart for the material and cross section
selected and compare T1 to the Working Load at 10% tension. selected and compare T1 to the Working Load at 10% tension.
If only one belt is desired, T1 may not be greater than the Working If only one belt is desired, T1 may not be greater than the Working
Load at 10% tension. If more than one belt is required, divide T1 Load at 10% tension. If more than one belt is required, divide T1
by the Working Load at 10% tension to arrive at number of belts. by the Working Load at 10% tension to arrive at number of belts.
Round up to the nearest whole number of belts. Round up to the nearest whole number of belts.
¼" round rated 4.9 lbs @ 10% tension. 14.02 ÷ 4.9 = 2.86 use 3 belts 6mm round rated 19.4 N @ 10% tension. 54.98 ÷ 19.4 = 2.83 use 3 belts
5. Find load per belt by dividing T1 by number of belts. From the Technical 5. Find load per belt by dividing T1 by number of belts. From the Technical
Data chart, determine the percent installed tension for the load per belt. Data chart, determine the percent installed tension for the load per belt.
Load/belt = 14.02 ÷ 3 = 4.67 lbs Load/belt = 54.98 N ÷ 3 = 18.33 Newtons
Corresponding installed tension = 9.7% Corresponding installed tension = 9.6%
Eagle® Belting Chemical Resistance Chart

Polyurethane is extremely resistant to many industrial oils and chemicals, but not all. Below are a wide variety of oils and chemicals found
in industrial applications. Consult Fenner Drives Applications Engineering group for assistance on projects with design criteria outside these
parameters, or obtain a sample belt and determine its compatibility in the precise operating conditions.
Acids Rating Fuels Rating Solvents Rating
Acetic, 5% C ASTM Fuel A A Acetone C
Boric, 4% C ASTM Fuel B C Aniline C
Chromic C ASTM Fuel C C Benzene C
Citronic C Diesel Fuel B Benzyl Alcohol C
Formic C Gasoline, Premium C Butane C
HCI B Gasohol (10-15% Methanol) C Butyl Acetate C
Hydrochloric, 10% C Jet Fuel, JP-4 A Butyl Alcohol C
Lactic C Kerosene A Carbon Tetrachloride C
Nitric, >1% C Chlorobenzane C
Oleic C Greases Rating Chloroform C
Phosphoric C Calcium Grease B Cyclohexane C
Sulfuric, <20% B Sodium Grease B Ethanol C
Sulfuric, >20% C Teflon Grease A Ether C
Ethyl Acetate C
Alkalines Rating Miscellaneous Rating Freon 11, 12, 22 C
Ammonia, >10% C Dioctyl Phthalate (DOP) A Freon 113 A
Detergent, 1% A Ethylene Chloride C Glycerine, Glycerol, Glycol A
Potassium Hydroxide B Ethylene Dichloride C Heptane B
Soap, 1% A Ethylene GlycoWater 50/50 C Hexane C
Sodium Hydroxide, 10% C Household Cleaner B Isopropyl Alcohol C
Naptha A Methanol C
Aqueous Solutions Rating Silage (Silo) Juice C Methyl Acetate C
Aluminum Chloride, 10% C Natural Perspiration B Methyl Ethyl Ketone C
CONVEYING
Ammonium Chloride, 10% C Tincture of Iodine C Methyl Glycol C

Bleaching Agent, 40% B Tricresyl Phosphate C Methylene Chloride C
Bleaching Agent, 100% C N-Methyl Pyrrolidone C
Calcium Chloride, 40% C Oils Rating Perchloroethylene C
Caustic Soda, 10% B ASTM Oil #1 A Pyridine C
Cola A ASTM Oil #2 A Turpentine A
Ferric Chloride, 10% C ASTM Oil #3 A Tetrachloroethylene C
Hydrogen Peroxide, 3% B Brake Fluid (ATE or ATS) C Tetrahydrofuran C
Isopropanol, 50% C Gear Box Oil (SAE 90) A Toluene C
Magnesium Chloride, 30% C Hydraulic Fluid C Trichloroethylene C
Potassium Chloride, 40% C Hydraulic/Water Emulsion C Xylene C
Potassium Dichromate, 10% C Mineral Oil A
Potassium Permanganate, 5% C Motor Oil A
Sea Water B Paraffin Oil A
Sodium Bisulfate, 10% C Petroleum (Texas Sour Crude) A
Sodium Chloride, 10% C Power Steering Fluid B Rating Key
Sodium Hypochlorite, 5% C Skydrol 500 Oil C A - Fluid has little or no effect
Sodium Thiosulfate, 20% A Transmission Oil A A B - Fluid has minor to moderate effect
Water, Deionized A C - Fluid has severe effect
Trackstar® Chemical Resistance Chart

UHMW-PE
Acids, Weak S
Acids, Strong L
Alkalies, Weak S
Alkalies, Strong S
Hydrocarbons, Aromatic L
Hydrocarbons, Aliphatic S S – Suitable
Ketones S L – Limited Suitability
Ethers S U – Unsuitable
Esters S
Alcohols S Disclaimer: Fenner Drives accepts no
responsibility nor makes any claims
Inorganic Salt Solutions S
regarding suitability for a particular
Continuous Sunlight U
use or purpose.
For assistance, contact Fenner Drives Applications Engineering

group at AE@fennerdrives.com.
MATERIAL PROPERTIES – CONVEYING PRODUCTS

NON-REINFORCED
Material and Color Hardness Compliancy Stainless Steel Steel UHMW °F °C
Eagle Blue 80 EC 80A EC, FDA 0.80 0.70 0.55 -22 to +150 -30 to +66
Eagle Clear 80 EC 80A EC, FDA 0.80 0.70 0.55 -22 to +150 -30 to +66
Eagle Blue 80 MD 80A FDA 0.75 0.65 0.50 -22 to +150 -30 to +66
Eagle Opaque 80 80A – 0.75 0.65 0.50 -22 to +150 -30 to +66
Eagle Orange 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Clear 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 85A – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Red 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Blue 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Green 89 89A – 0.65 0.55 0.40 -22 to +150 -30 to +66
Eagle Green 89 Textured 89A – 0.50 0.40 0.30 -22 to +150 -30 to +66
Eagle Red 90 90A – 0.60 0.50 0.38 -22 to +150 -30 to +66
Eagle Beige 95 95A FDA 0.55 0.45 0.35 -22 to +150 -30 to +66
Eagle Clear 95 95A FDA 0.55 0.45 0.35 -22 to +150 -30 to +66
Eagle White 40D 40D – 0.55 0.45 0.35 -22 to +176 -30 to +80
Eagle Blue 55D 55D – 0.50 0.40 0.30 -22 to +176 -30 to +80
Eagle Blue 80 EC QC 80A EC, FDA 0.50 0.40 0.30 -22 to +150 -30 to +66
Eagle Clear 85 QC 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Red 85 QC 85A – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Yellow 85 QC 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Blue 85 QC 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Red 85 CXF 85A Base, 60A Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 SGT PU 85A Base, 70A PU Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
CONVEYING
Eagle Ivory 85 SGT PVC 85A Base, 50A PVC Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 SGT TPE 85A Base, 55A TPE Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Green 89 SGT PVC 89A Base, 50A PVC Top – 0.65 0.55 0.40 -22 to +150 -30 to +66
Eagle Red 90 SGT PVC 90A Base, 50A PVC Top – 0.60 0.50 0.38 -22 to +150 -30 to +66
Eagle White 40D SGT PVC 40D Base, 50A PVC Top – 0.55 0.45 0.35 -22 to +150 -30 to +66
REINFORCED
Material and Color Hardness Compliancy Stainless Steel Steel UHMW °F °C
Eagle Opaque 80 80A – 0.75 0.65 0.50 -22 to +150 -30 to +66
Eagle Orange 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Hyfen 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 85A FDA 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Green 89 89A – 0.65 0.55 0.40 -22 to +150 -30 to +66
Eagle Green 89 Textured 89A – 0.50 0.40 0.30 -22 to +150 -30 to +66
Eagle Beige 95 95A FDA 0.55 0.45 0.35 -22 to +150 -30 to +66
Eagle Hyfen 95 95A FDA 0.55 0.45 0.35 -22 to +150 -30 to +66
Eagle Red 50D LCF CC 50D – n/a n/a n/a -22 to +150 -30 to +66
Eagle Blue 55D CC 55D – n/a n/a n/a -22 to +176 -30 to +80
Eagle Blue 55D Aramid CC 55D – n/a n/a n/a -22 to +176 -30 to +80
Eagle Natural 55D CC 55D – n/a n/a n/a -22 to +176 -30 to +80
Eagle Green 63D CC 63D – n/a n/a n/a -22 to +176 -30 to +80
Eagle Natural 63D CC 63D – n/a n/a n/a -22 to +176 -30 to +80
Eagle Ivory 85 RSGT PU 85A Base, 70A PU Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 RSGT PVC 85A Base, 50A PVC Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Ivory 85 RSGT TPE 85A Base, 55A TPE Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Hyfen 85 CXF V 85A Base, 60A Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Eagle Hyfen 85 CXR V 85A Base, 60A Top – 0.70 0.60 0.45 -22 to +150 -30 to +66
Cogged Belting is not FDA compliant.
Contact Temperature Range

NON-REINFORCED
Material and Color Hardness Compliancy °F °C
Eagle Endurance Taper Edge Band 60D – -22 to +176 -30 to +80
MATERIAL PROPERTIES – CONVEYING PRODUCTS
Temperature Range
Product Color Compliancy Material °F °C
Tango Belting Purple RoHS Composite Polyester/Polyurethane -40 to +240 -40 to +116
Composite Polyester/Polyurethane
PowerTwist SuperGrip Top PU Red, Orange Top RoHS -22 to +150 -30 to +66
Polyurethane grip top surface
PowerTwist SuperGrip Top PVC Red, Green Top RoHS -22 to +150 -30 to +66
PVC grip top surface
PowerTwist Friction Top® Red RoHS Composite Polyester/Polyurethane -22 to +150 -30 to +66
PowerTwist Bridge Top™ Red, White Inserts RoHS -40 to +450* -40 to +232 *
PTFE inserts
PowerTwist Roller Drive™ Red RoHS Composite Polyester/Polyurethane -22 to +150 -30 to +66
PowerTwist Plus Antistatic Blue RoHS Composite Polyester/Polyurethane -40 to +240 -40 to +116
PowerTwist RCS Red, White Tabs RoHS -22 to +150 -30 to +66
Polyurethane tabs
* Contact temperature
CONVEYING
Our Trackstar Guides are produced using only the highest quality
virgin black UHMW-PE material to ensure minimum friction and
maximum wear resistance.
ASTM Test UHMW-PE
Density (gm/cm3) D792 .930 – .936

Tensile Strength at yield ( psi at 73° F ) D638 3100
Elongation at break ( % at 73° F ) D638 350
Relative volumetric abrasion loss* N/A 100
Coefficient of friction on steel 73° F Static N/A .15 – .20
Coefficient of friction on steel 73° F Dynamic N/A .10 – .20
Hardness 73° F ( Shore D ) D785 62 – 66
-4
Coefficient of linear thermal expansion ( in/in/° F ) D696 1.1 x 10
Continuous Service Temp in air ( max ) (° F ) D696 180
15
Volume Resistivity ( Ohm/cm ) D257 >10
* Industry standard testing method using slurry of 60% aluminum oxide and 40%
water at a rotation speed of 1750 rpm for two hours. A lower number indicates
better abrasion resistance.
Construction Operating Temperature Range
Tensioner Series Body Arm °F °C

RT1000, RT1600 Die Cast Aluminum Die Cast Aluminum -10 to +300 -23 to +149
RT3000 Die Cast Aluminum Heavy Duty Stamped Steel -20 to +350 -29 to +177
CT1000, 2000, 3000 Die Cast Aluminum UHMW Head -10 to +180 -23 to +82
POWER TRANSMISSION SOLUTIONS
PowerTwist Plus, SuperTLink, and NuTLink V Belting

PowerTwist Plus, SuperTLink and NuTLink V Belts provide time- and
cost-saving benefits to maintenance engineers and equipment designers.
• Longer belt life in even the harshest environments.
• Easier, faster installation without tear-downs or struggling

with motor bases.
• Install on captive drives and fixed center drives.
• Make matching sets.
• Better drive efficiency due to minimal belt elongation.
• Reduced noise, longer bearing life due to low belt vibration.
T-Max Belt and Chain Tensioners

T-Max spring loaded tensioners automatically take up the slack –
decreasing downtime, reducing operating costs and saving energy.
• Constructed from high-quality materials for proven durability

in harsh environments.
• Wide range of tensioners to handle single and multiple strand

belt and chain drives.
POWER TRANSMISSION
Trantorque and B-LOC Keyless Locking Devices
A true zero backlash shaft-to-hub connection with none of the
operational drawbacks of keyways, shrink fits, or splines.
• Extensive inventory – same day shipment available for stock bore

sizes: 1/8 – 8", 3 – 600mm.
• 18 different internal and external locking devices for any application.
• Made-to-Order keyless locking devices for your most demanding

applications.
BELTING, BELT & CHAIN TENSIONERS FOR POWER TRANSMISSION
Link Belting
Minimum
Nominal Width Part Numbers Pulley Ø
LINK BELTING Cross
Section inches mm 5' Sleeve 6' Sleeve 2m Sleeve 5m 25' 100' 10m 20m 30m inches mm
PowerTwist Plus® 3L 3/8 0418010SL 0405010 0408010 2.00
PowerTwist Plus Z/10 10 04100202 0410020 0418023 45
NuTLink® Z/10 10 L01Z5 L01Z20 45
PowerTwist Plus A/4L/13 1/2 13 0418030SL 04090502M 0405030 0408030 0410030 0418033 3.00 80
PowerTwist Plus Antistatic A/4L/13 1/2 13 0408505 0408501 040850010 0408500 3.00 80
NuTLink A/13 1/2 13 L01A5 L01A20 3.00 80
PowerTwist Plus AA 1/2 13 0405230 0408230 0419230 3.00 80
PowerTwist Plus B/5L/17 5/8 17 0418050SL 04090302M 0405050 0408050 0410050 0418053 5.00 125
PowerTwist Plus Antistatic B/5L/17 5/8 17 0408605 0408601 040860010 0408600 5.00 125
NuTLink B/17 5/8 17 L01B5 L01B20 5.00 125
PowerTwist Plus BB 5/8 17 0405250 0408250 0419250 5.00 125
PowerTwist Plus C/22 7/8 22 0405070 0408070 0410070 0418073 9.00 229
NuTLink C/22 7/8 22 L01C5 L01C20 9.00 229
PowerTwist Plus CC 7/8 22 0405270 0408270 0418270 9.00 229
PowerTwist Plus D/32 1-1/4 32 0405090 0408090 0410090 0418093 13.2 335
SuperTLink® 3V 0.45 11 0407025 0407100 2.8 71
SuperTLink 5V 0.66 17 0417025 0417100 5.5 140
SuperTLink SPZ 10 L02Z5N L02Z20N 71
SuperTLink SPA 13 L02A5N L02A20N 90
SuperTLink SPB 17 L02B5 L02B20 140
SuperTLink SPC 22 L02C5 L02C20 224
PowerTwist® Ground Round® 5/16" 04051050 04081050 2.00 51
PowerTwist Ground Round 3/8" 04051060 04081060 3.00 76
PowerTwist Ground Round 3/4" 04081080 8.50 216
TLink Installation Tool L02NT10 (10pk)
T-Max® Belt & Chain Tensioners

Tensioner Guidelines for Belt & Chain Drives
Use the following charts to guide your tensioner selection.
POWER TRANSMISSION
V Belt 1 Groove 2 Groove 3 Groove 4 Groove

Tensioners Z A SPZ SPA/3V B SPB/5V Z A SPZ SPA/3V B SPB/5V Z A SPZ SPA/3V B SPB/5V Z A SPZ SPA/3V B SPB/5V
RT1000-L X X X X X
RT1000 X X X X X
RT3000 X X X X X X X X X X
RT4000 X X X X X X X X X X X X X X
Chain Single Chain Double Chain

Tensioners 35 40 50 60 80 100 35 40 50 60 80
06B 08B 10B 12B 16B 20B 06B 08B 10B 12B 16B
RT1600-L X X X X X
RT1600 X X X X X X X X
RT1000 X X X X X X X X X
RT3000 X X X X
RT4100 X
RT4900 X
CT1000-L X X X X X
CT1000 X X X X X X X X X X X
CT2000 X X X X X X X
CT3000 X X X
CT3000-H X
Note: Consult Fenner Drives Applications Engineering for any belt or chain application concerns.
BELT & CHAIN TENSIONERS FOR POWER TRANSMISSION
T-Max® Belt & Chain Tensioners
RT1000 Series * †
Part
Dimensions (inches) Rotation Force ‡
Number A B C D E F G H I (degrees) (degrees)
RT1001 3.50 0.29 0.59 2.76 5.37 1.15 3⁄8-16 3⁄8-16 1.45 15 16
30 23
45 30
RT1003 3.50 0.29 0.59 2.76 5.37 1.15 0.40 3⁄8-16 1.45 15 16
30 23
45 30
RT10542ZF 3.50 0.29 0.59 2.76 5.37 1.15 3⁄8-16 3⁄8-16 1.45 15 16
Zerk fitted to apply grease to the spring cavity. 30 23
45 30
RT10562ZF 3.50 0.29 0.59 2.76 5.37 1.15 3⁄8-16 3⁄8-16 1.45 15 16
Zerk fitted to apply grease to the shaft area. 30 23
45 30
RT1600 Series * †
Part
Number A B C D E F G H I (degrees) (degrees)
RT1601-L 6.37 0.29 0.59 2.76 8.24 1.12 3⁄8-16 3⁄8-16 1.45 15 10
30 13
45 16
RT1603-L 6.37 0.29 0.59 2.76 8.24 1.12 0.40 3⁄8-16 1.45 15 10
30 13
45 16
RT1601 6.37 0.29 0.59 2.76 8.24 1.12 3⁄8-16 3⁄8-16 1.45 15 20
25 23
35 26
RT1603 6.37 0.29 0.59 2.76 8.24 1.12 0.40 3⁄8-16 1.45 15 20
25 23
35 26
RT3000 Series *
POWER TRANSMISSION
Part
Number A B C D E F G H (degrees) (degrees)
RT3000 4.50 0.28 1.35 3.34 6.92 1.50 3⁄8-16 0.51 0 - 70 0 - 42
RT3001 4.50 0.28 1.35 3.34 6.92 1.50 0.40 0.51 0 - 70 0 - 42
* Maximum load no more than 1" distance from front face of tensioner to centerline of idler.
† Do not use on reciprocating applications such as IC engines and piston devices.
‡ All forces (lbs.) are nominal.
BELT & CHAIN TENSIONERS FOR POWER TRANSMISSION
T-Max® Tensioners
RT4100 Series * †
⁄16"
3 Part
Number A A1 B C D E G H I J K M M1 (degrees) (degrees)
RT4100 5.40 4.50 0.47 1.19 4.00 8.58 1⁄2 - 13 0.51 2.60 2.15 2.46 2.35 3.25 0 - 85 0 - 85
RT4101 5.40 4.50 N/A 1.19 4.00 8.58 0.51 0.51 2.60 2.15 2.46 2.35 3.25 0 - 85 0 - 85
RT4900 Series * †
⁄8"
3 Dimensions (inches) Rotation § Force §
Part
Number A B C D E G H I K (degrees) (degrees)
RT4900 5.40 N/A 2.37 4.00 8.58 0.51 0.51 2.60 2.46 0 - 85 0 - 70
RT4902 5.40 0.47 2.37 4.00 8.58 1⁄2 - 13 0.51 2.60 2.46 0 - 85 0 - 70
POWER TRANSMISSION
* Maximum load no more than 1½" distance from front face of tensioner arm to centerline of idler.
† Requires a fixed head, hook style spanner wrench for tensioning (supplied with unit).
‡ Dimension A: 1° rotation = .83 lb. force.
Dimension A1: 1° rotation = 1 lb. force. All forces (lbs.) are nominal.
§ 1° rotation = .83 lb. force. All forces (lbs.) are nominal.
MATERIAL PROPERTIES – POWER TRANSMISSION PRODUCTS
Temperature Range
Product Color Compliancy Material °F °C
PowerTwist Plus Red RoHS, Reach Composite Polyester/Polyurethane -40 to +240 -40 to +116
PowerTwist® Ground Round® Red RoHS, Reach Composite Polyester/Polyurethane -40 to +240 -40 to +116
PowerTwist Plus Antistatic Blue RoHS Composite Polyester/Polyurethane -40 to +240 -40 to +116
SuperTLink Blue RoHS -40 to +240 -40 to +116
Steel Rivets
NuTLink Orange RoHS -40 to +240 -40 to +116
Steel Rivets
Construction Operating Temperature Range
Tensioner Series Body Arm °F °C
RT1000, RT1600 Die Cast Aluminum Die Cast Aluminum -10 to +300 -23 to +149
CT1000, 2000, 3000 Die Cast Aluminum UHMW Head -10 to +180 -23 to + 82
POWER TRANSMISSION
KEYLESS LOCKING DEVICES FOR POWER TRANSMISSION
Trantorque® or B-LOC®: the Enduring Question

Once you have decided that a keyless locking device is the right solution, your next big decision is which
series of Fenner Drives Trantorque or B-LOC Keyless Locking Device to choose. While the underlying
engineering principle for both Trantorque and B-LOC is exactly the same, the functionality of each may
appeal to different applications and situations.
Overall
SELECTION Shaft Size Torque Axial Self
Length Concentricity
ASSISTANCE Range Transmission Movement Centering
Range
Trantorque GT 5
⁄8 — 3 in; 11⁄2 — 41⁄4 in; 153 — 1,444 ft lb; ~0.075 in (1.9mm) Yes Excellent
15 — 75mm 38.1 — 108mm 196 — 1,939 Nm
Trantorque Mini 1
⁄8 — 5⁄8 in; 3
⁄4 — 11⁄8 in; 91 — 1,234 in lb; ~0.045 in (1.1mm) Yes Excellent
3 — 16mm 19 — 29mm 10 — 140 Nm
Trantorque OE ⁄16 — 11⁄2 in;

11
15⁄32 — 125⁄32 in; 162 — 492 ft lb; ~0.075 in (1.9mm) Yes Excellent
17 — 35mm 29 — 43mm 211 — 658 Nm
Trantorque NT ⁄16 — 2 in
3
11⁄16 — 43⁄64 in 7 — 561 ft lb No Yes Excellent
B-LOC B109 ⁄4 — 13⁄8 in;

1 0.650 — 1.102 in; 167 — 5,929 in lb; No Yes Excellent
6 — 35mm 16.5 — 28.5mm 19 — 683 Nm
B-LOC B103 3
⁄4 — 8 in; 1.122 — 2.559 in; 247 — 48,913 ft lb; ~0.032 in (0.8mm) Yes Excellent
15 — 400mm 21.5 — 116mm 115 — 489,701 Nm
B-LOC B106 5
⁄8 — 8 in; 0.846 — 2.559 in; 55 — 37,959 ft lb; No Yes Excellent
14 — 400mm 20.5 — 116mm 68 — 372,590 Nm
B-LOC B800 ⁄4 — 4 15⁄16 in;

1 0.866 — 5.039 in; 16 — 18,362 ft lb; No Yes Excellent
6 — 130mm 22 — 128mm 22 — 25,742 Nm
POWER TRANSMISSION
B-LOC B400 3
⁄4 — 8 in; 0.787 — 2.047 in; 234 — 53,827 ft lb; No No Fair
18 — 500mm 20 — 102mm 302 — 814,734 Nm
B-LOC B112 1 — 8 in; 1.575 — 5.866 in; 600 — 110,469 ft lb; No Yes Excellent
24 — 600mm 40 — 203mm 755 — 1,756,139 Nm
B-LOC B115 2 3⁄4 — 8 in; 2.441 — 4.134 in; 5,261 — 70,109 ft lb; No Yes Excellent
70 — 600mm 62 — 160mm 7,118 — 1,228,856 Nm
B-LOC B113 180 — 560mm 231 — 280mm 223,566 — 2,342,897 Nm No Yes Excellent
B-LOC B117 180 — 600mm 122 — 178mm 87,000 — 1,080,000 Nm No Yes Excellent
B-LOC 1
⁄2 — 3 in; 0.708 – 2.224 in 48 - 4797 ft lb; No Yes Fair to Excellent
Compression Hubs 12 — 75mm 18.1 – 56.6mm 65 – 6400 Nm
B-LOC 5
⁄8 — 21.26 in; 0.71 — 11.26 in; 139 — 3,267,568 ft lb No Yes Excellent
Shrink Discs 15 — 540mm 22 — 286 mm
B-LOC 5
⁄8 - 4-1⁄4 in; 1.339 – 4.960 in; 132 – 19810 ft-lb; No Yes Excellent
WK Couplings 16 – 105mm 34 -126mm 179 – 26859 Nm
Recessed Internal or External

Self-Locking Installation RoHS At the broadest level, keyless locking devices may be split into two categories, internal
Balance
Tapers Without Compliant locking devices (Trantorque and B-LOC Keyless Bushings) and external locking devices
Counterbore
(B-LOC Shrink Discs, WK Couplings, and Compression Hubs). Selecting an external
locking device is relatively straightforward. If you are joining two solid shafts at their
Excellent Yes No Yes
ends, see the section on B-LOC WK Couplings. To connect most industry standard
coupling hubs or flanges, gearboxes with hollow-shaft outputs, or other similar
geometries see the B-LOC Shrink Disc section. If the component you are mounting has
Very Good Yes No Yes a narrow hub or has a short length through-bore, like a plate sprocket, see the section
on B-LOC Compression Hubs.
Most applications, however, consist of a shaft and bored component that require the
Excellent Yes No Yes use of a keyless bushing. Many more factors play into the proper selection of a keyless
bushing and are briefly addressed below and in the accompanying table.
Shaft Size
Very Good Yes No Yes
Shaft size may immediately determine whether you use a Trantorque or B-LOC Keyless
Bushing. A Trantorque can accommodate shaft sizes as small as 1/8" (3mm) while
the smallest shaft a B-LOC will fit is 1/4" (6mm). At the other end of the spectrum,
Excellent Yes No Yes Trantorque tops out at 3" (75mm) and the largest B-LOC will accommodate shafts
approaching 24" (600mm). Larger and smaller versions of all units may be available
as MTOs (Made To Order).
Excellent Yes Yes Yes As a practical matter, under most circumstances our Application Engineers will
recommend a Trantorque for shaft sizes 1-1/2" and under and a B-LOC for shaft sizes
over 1-1/2". These are considered the optimal ranges for the product lines taking
maximum advantage of each product’s unique installation method.
Installation
The most obvious difference when comparing a B-LOC to a Trantorque Keyless
Excellent Yes No Yes Bushing is the installation method. All B-LOC units use a plurality of screws; all
Trantorque units use a single hex nut. Your particular application will be your guide
as to which method is preferred.
POWER TRANSMISSION
Very Good No Yes No The advantages of a single hex nut, as used in a Trantorque Keyless Bushing, are
speed and simplicity of installation and removal. For installation, simply tighten the
single hex nut to the specified installation torque and your connection is complete.
Removal is just as straightforward. Merely loosen the same hex nut and the unit will
Excellent Yes Yes Yes
disengage. The cost for this simplicity is a relatively high installation torque requirement,
which may present a challenge for larger units.
Since the force needed to draw the mating tapers of a B-LOC Keyless Bushing
Excellent Yes Yes Yes
together is distributed among many screws, the installation torque of an individual
screw is relatively low. This allows for effortless installation of even the largest units. The
price paid for this low installation torque is a more timely and complex installation and
Excellent Yes Yes Yes removal process. The screws must be slowly and equally tightened in series until the
final installation torque is achieved. Since most B-LOC units have self locking tapers,
the removal process requires loosening all screws and backing off the unit.
Other Considerations
There are several other design points that may help guide you in your selection
process. OD to ID ratios vary widely from product to product. If your design requires
Excellent No N/A Yes a small OD/ID ratio, consider either a B-LOC B800 or a Trantorque OE. While all
Fenner Drives Keyless Bushings are designed to transmit high torque loads, if you have
an extremely demanding application, a double taper B-LOC B112, B113 or B115 may
be required. If you are mounting plate sprockets or other thin components, B-LOC
Excellent No N/A No
Compression Hubs could be the solution. Other factors to consider include axial
movement, recessed installation, corrosion protection, and RoHS compliance. The table
is designed to help make your selection process easier, but if you are ever in doubt,
Excellent No N/A Yes please contact a Fenner Drives Applications Engineer at AE@fennerdrives.com. We
will be happy to guide you to the perfect keyless locking device solution.
Trantorque®
GT
B1
Inch
TOLERANCE (TL)
A d D
TL for shaft and bore is ± .003"
for all sizes
A1 B L
L1
Trantorque GT – Inch
Part Number Wrench Size Ma
Electroless Thin Dense

Nickel Chrome Install Shipping
Plated Coated Stainless d D L L1 A A1 B B1 Torque Weight
Steel Steel Steel Steel (inch) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (ft lb) (lb)
6202120UP 6202120EN 6202120DC 6990120 5/8 1 1/2 3/4 1 1/2 1 1/4 1 1/2 5/16 5/16 100 0.5
6202140UP 6202140EN 6202140DC 6990140 11/16 1 1/2 3/4 1 1/2 1 1/4 1 1/2 5/16 5/16 100 0.5
6202160UP 6202160EN 6202160DC 6990160 3/4 1 1/2 3/4 1 1/2 1 1/4 1 1/2 5/16 5/16 100 0.5
6202190UP 6202190EN 6202190DC 6990190 13/16 1 3/4 7/8 1 7/8 1 1/2 1 3/4 7/16 3/8 125 0.7
6202200UP 6202200EN 6202200DC 6990200 7/8 1 3/4 7/8 1 7/8 1 1/2 1 3/4 7/16 3/8 125 0.7
6202220UP 6202220EN 6202220DC 6990220 15/16 1 3/4 7/8 1 7/8 1 1/2 1 3/4 7/16 3/8 125 0.7
6202240UP 6202240EN 6202240DC 6990240 1 1 3/4 7/8 1 7/8 1 1/2 1 3/4 7/16 3/8 125 0.7
6202270UP 6202270EN 6202270DC 6990270 1 1/16 2 1 2 1/4 1 3/4 2 1/2 9/16 167 1.1
6202280UP 6202280EN 6202280DC 6990280 1 1/8 2 1 2 1/4 1 3/4 2 1/2 9/16 167 1.1
6202300UP 6202300EN 6202300DC 6990300 1 3/16 2 1 2 1/4 1 3/4 2 1/2 9/16 167 1.1
6202320UP 6202320EN 6202320DC 6990320 1 1/4 2 1 2 1/4 1 3/4 2 1/2 9/16 167 1.1
6202350UP 6202350EN 6202350DC 6990350 1 5/16 2 3/8 1 1/2 2 3/4 2 2 3/8 9/16 1/2 192 1.1
6202360UP 6202360EN 6202360DC 6990360 1 3/8 2 3/8 1 1/2 2 3/4 2 2 3/8 9/16 1/2 192 1.9
6202380UP 6202380EN 6202380DC 6990380 1 7/16 2 3/8 1 1/2 2 3/4 2 2 3/8 9/16 1/2 192 1.8
6202400UP 6202400EN 6202400DC 6990400 1 1/2 2 3/8 1 1/2 2 3/4 2 2 3/8 9/16 1/2 192 1.8
6202430UP 6202430EN 6202430DC 6990430 1 9/16 2 5/8 1 11/16 3 1/8 2 1/4 2 5/8 9/16 11/16 234 2.5
POWER TRANSMISSION
6202440UP 6202440EN 6202440DC 6990440 1 5/8 2 5/8 1 11/16 3 1/8 2 1/4 2 5/8 9/16 11/16 234 2.4
6202460UP 6202460EN 6202460DC 6990460 1 11/16 2 5/8 1 11/16 3 1/8 2 1/4 2 5/8 9/16 11/16 234 2.4
6202480UP 6202480EN 6202480DC 6990480 1 3/4 2 5/8 1 11/16 3 1/8 2 1/4 2 5/8 9/16 11/16 234 2.3
6202510UP 6202510EN 6202510DC 6990510 1 13/16 2 7/8 2 3 9/16 2 1/2 2 7/8 5/8 3/4 409 3.5
6202520UP 6202520EN 6202520DC 6990520 1 7/8 2 7/8 2 3 9/16 2 1/2 2 7/8 5/8 3/4 409 3.4
6202540UP 6202540EN 6202540DC 6990540 1 15/16 2 7/8 2 3 9/16 2 1/2 2 7/8 5/8 3/4 409 3.3
6202560UP 6202560EN 6202560DC 6990560 2 2 7/8 2 3 9/16 2 1/2 2 7/8 5/8 3/4 409 3.2
6202562UP 6202562EN 6202562DC 6990562 2 1/16 3 1/8 2 1/8 3 3/4 2 3/4 3 1/8 5/8 13/16 442 3.8
6202564UP 6202564EN 6202564DC 6990564 2 1/8 3 1/8 2 1/8 3 3/4 2 3/4 3 1/8 5/8 13/16 442 4
6202566UP 6202566EN 6202566DC 6990566 2 3/16 3 1/8 2 1/8 3 3/4 2 3/4 3 1/8 5/8 13/16 442 3.8
6202568UP 6202568EN 6202568DC 6990568 2 1/4 3 1/8 2 1/8 3 3/4 2 3/4 3 1/8 5/8 13/16 442 3.7
6202570UP 6202570EN 6202570DC 6990570 2 5/16 3 3/8 2 1/4 3 7/8 3 3 3/8 11/16 3/4 467 4.4
6202572UP 6202572EN 6202572DC 6990572 2 3/8 3 3/8 2 1/4 3 7/8 3 3 3/8 11/16 3/4 467 4.5
6202574UP 6202574EN 6202574DC 6990574 2 7/16 3 3/8 2 1/4 3 7/8 3 3 3/8 11/16 3/4 467 4.4
6202576UP 6202576EN 6202576DC 6990576 2 1/2 3 3/8 2 1/4 3 7/8 3 3 3/8 11/16 3/4 467 4.2
6202580UP 6202580EN 6202580DC 6990580 2 9/16 3 5/8 2 3/8 4 1/16 3 1/4 3 5/8 11/16 13/16 500 5
6202582UP 6202582EN 6202582DC 6990582 2 5/8 3 5/8 2 3/8 4 1/16 3 1/4 3 5/8 11/16 13/16 500 5.1
6202584UP 6202584EN 6202584DC 6990584 2 11/16 3 5/8 2 3/8 4 1/16 3 1/4 3 5/8 11/16 13/16 500 5
6202586UP 6202586EN 6202586DC 6990586 2 3/4 3 5/8 2 3/8 4 1/16 3 1/4 3 5/8 11/16 13/16 500 5
6202590UP 6202590EN 6202590DC 6990590 2 13/16 3 7/8 2 1/2 4 1/4 3 1/2 3 7/8 3/4 13/16 550 6
6202592UP 6202592EN 6202592DC 6990592 2 7/8 3 7/8 2 1/2 4 1/4 3 1/2 3 7/8 3/4 13/16 550 6
6202594UP 6202594EN 6202594DC 6990594 2 15/16 3 7/8 2 1/2 4 1/4 3 1/2 3 7/8 3/4 13/16 550 6
6202596UP 6202596EN 6202596DC 6990596 3 3 7/8 2 1/2 4 1/4 3 1/2 3 7/8 3/4 13/16 550 5
Trantorque®
GT
Inch
Performance Data Table

Mt Th Ph
*
Maximum Transmitted
Hub
d Torque Thrust Pressure
(inch) (ft lb) (lbs) (psi)
5/8 153 5857 13347 MULTIPLIERS

11/16 168 5857 13347 Steel 1.0
3/4 183 5857 13347
Electroless Nickel
13/16 207 6110 9336 Plated Steel 0.6
7/8 223 6110 9336
Thin Dense Chrome
15/16 239 6110 9336
Coated Steel 1.1
1 255 6110 9336
Stainless
1 1/16 311 7014 8313
Steel 0.3
1 1/8 329 7014 8313
1 3/16 347 7014 8313
1 1/4 365 7014 8313
1 5/16 384 7019 4842

The data in the Performance Data
Table is for a steel unit. To obtain data
1 3/8 402 7019 4842
for other materials, use the multiplier
1 7/16 421 7019 4842
provided.
1 1/2 439 7019 4842
1 9/16 499 7663 4287 For example, you require a 2" (d)
POWER TRANSMISSION
1 5/8 519 7663 4287 Electroless Nickel Plated Trantorque GT.
1 11/16 539 7663 4287
1 3/4 559 7663 4287

Find 2" (d) in Performance Data
Table and use the multiplier of 0.6 for
1 13/16 913 12085 5257
Electroless Nickel Plated Steel.
1 7/8 944 12085 5257
1 15/16 976 12085 5257 Mt : 1007 x 0.6 = 604

2 1007 12085 5257 Th : 12085 x 0.6 = 7251
2 1/16 1013 11793 4457 *Ph : 5257 x 0.6 = 3154
2 1/8 1044 11793 4457
2 3/16 1075 11793 4457 * IMPORTANT:

2 1/4 1106 11793 4457 After hub pressure (Ph) is determined,
2 5/16 1101 11430 3789 record D, L and Ph and refer to page 70
2 3/8 1131 11430 3789
to calculate the minimum hub diameter.
2 7/16 1161 11430 3789
2 1/2 1191 11430 3789
2 9/16 1207 11306 3313
2 5/8 1237 11306 3313
2 11/16 1266 11306 3313
2 3/4 1295 11306 3313
2 13/16 1354 11555 3014
2 7/8 1384 11555 3014
2 15/16 1414 11555 3014
3 1444 11555 3014
Trantorque®
GT
B1
Metric
TOLERANCE (TL)
A d D
TL for shaft and bore is ± .08mm
for all sizes
A1 B L
L1
Trantorque GT – Metric
Part Number Wrench Size Ma

Plated Coated Stainless d D L L1 A A1 B B1 Torque Weight
Steel Steel Steel Steel (mm) (mm) (mm) (mm) (mm) (inch) (mm) (mm) (Nm) (kg)
6202800UP 6202800EN 6202800DC 6990800 15 38.0 19.1 38.1 32 1 1/2 8.0 8.9 136 0.2
6202803UP 6202803EN 6202803DC 6990803 16 38.0 19.1 38.1 32 1 1/2 8.0 8.9 136 0.2
6202804UP 6202804EN 6202804DC 6990804 17 38.0 19.1 38.1 32 1 1/2 8.0 8.9 136 0.2
6202805UP 6202805EN 6202805DC 6990805 18 38.0 19.1 38.1 32 1 1/2 8.0 8.9 136 0.2
6202808UP 6202808EN 6202808DC 6990808 19 38.0 19.1 38.1 32 1 1/2 8.0 8.9 136 0.2
6202811UP 6202811EN 6202811DC 6990811 20 45.0 22.2 47.6 38 1 3/4 11.1 9.5 170 0.4
6202815UP 6202815EN 6202815DC 6990815 22 45.0 22.2 47.6 38 1 3/4 11.1 9.5 170 0.4
6202820UP 6202820EN 6202820DC 6990820 24 45.0 22.2 47.6 38 1 3/4 11.1 9.5 170 0.3
6202825UP 6202825EN 6202825DC 6990825 25 45.0 22.2 47.6 38 1 3/4 11.1 9.5 170 0.3
6202830UP 6202830EN 6202830DC 6990830 28 51.0 25.4 57.2 46 2 12.7 14.3 225 0.5
6202835UP 6202835EN 6202835DC 6990835 30 51.0 25.4 57.2 46 2 12.7 14.3 225 0.5
6202840UP 6202840EN 6202840DC 6990840 32 51.0 25.4 57.2 46 2 12.7 14.3 225 0.5
6202845UP 6202845EN 6202845DC 6990845 34 60.5 38.1 69.9 50 2 3/8 14.3 12.7 260 0.9
6202850UP 6202850EN 6202850DC 6990850 35 60.5 38.1 69.9 50 2 3/8 14.3 12.7 260 0.9
6202855UP 6202855EN 6202855DC 6990855 36 60.5 38.1 69.9 50 2 3/8 14.3 12.7 260 0.9
6202860UP 6202860EN 6202860DC 6990860 38 60.5 38.1 69.9 50 2 3/8 14.3 12.7 260 0.8
POWER TRANSMISSION
6202865UP 6202865EN 6202865DC 6990865 40 67.0 42.9 79.4 60 2 5/8 14.3 17.4 316 1.2
6202870UP 6202870EN 6202870DC 6990870 42 67.0 42.9 79.4 60 2 5/8 14.3 17.4 316 1.1
6202876UP 6202876EN 6202876DC 6990876 45 73.0 50.8 90.5 65 2 7/8 15.9 19.1 554 1.6
6202880UP 6202880EN 6202880DC 6990880 48 73.0 50.8 90.5 65 2 7/8 15.9 19.1 554 1.6
6202885UP 6202885EN 6202885DC 6990885 50 73.0 50.8 90.5 65 2 7/8 15.9 19.1 554 1.5
6202900UP 6202900EN 6202900DC 6990900 55 80.0 54.0 95.3 70 3 1/8 15.9 20.7 600 1.8
6202910UP 6202910EN 6202910DC 6990910 60 86.0 57.2 98.4 75 3 3/8 17.5 19.1 635 2
6202920UP 6202920EN 6202920DC 6990920 65 92.0 60.3 103.2 82 3 5/8 17.5 20.7 680 2
6202930UP 6202930EN 6202930DC 6990930 70 92.0 60.3 103.2 82 3 5/8 17.5 20.7 680 2
6202940UP 6202940EN 6202940DC 6990940 75 100.0 63.5 108.0 90 3 7/8 19.1 20.7 750 3
Trantorque®
GT
Metric

Mt Th Ph*
Maximum Transmitted
Hub
(mm) (Nm) (kN) (N/mm2)
15 196 26 93 MULTIPLIERS
16 209 26 93 Steel 1.0
17 222 26 93
Electroless Nickel
18 235 26 93
Plated Steel 0.6
19 248 26 93
Thin Dense Chrome
20 273 27 64
Coated Steel 1.1
22 300 27 64
Stainless
24 327 27 64
Steel 0.3
25 341 27 64
28 434 31 57
30 465 31 57
The data in the Performance Data
32 496 31 57
Table is for a steel unit. To obtain data
34 530 31 33
for other materials, use the multiplier
35 546 31 33 provided.
36 561 31 33
38 592 31 33 For example, you require a 30mm (d)
POWER TRANSMISSION
40 679 34 29 Electroless Nickel Plated Trantorque GT.
42 713 34 29
Find 30mm (d) in Performance Data
45 1208 54 36
Table and use the multiplier of 0.6 for
48 1289 54 36
Electroless Nickel Plated Steel.
50 1343 54 36
55 1444 53 31 Mt : 465 x 0.6 = 279

60 1530 51 26 Th : 31 x 0.6 = 19
65 1640 50 23 *Ph : 57 x 0.6 = 34
70 1766 50 23
75 1939 52 21 * IMPORTANT:
After hub pressure (Ph) is determined,
record D, L and Ph and refer to page 70
Trantorque®
Mini
Inch
TOLERANCE (TL)
A d D
for all sizes
B L
L1
Trantorque Mini – Inch

Wrench
Part Number Size M a†

Plated Coated Stainless d D L L1 A B Torque Weight
Steel Steel Steel Steel (inch) (inch) (inch) (inch) (inch) (inch) (in lb) (lb)
6410013 6202102EN 6410013DC 6990102 1/8 5/8 3/8 3/4 1/2 1/8 125 0.1
6410019 6202103EN 6410019DC 6990103 3/16 5/8 3/8 3/4 1/2 1/8 125 0.1
6410025 6202105EN 6410025DC 6990105 1/4 5/8 3/8 3/4 1/2 1/8 125 0.1
6410031 6202107EN 6410031DC 6990107 5/16 3/4 7/16 7/8 5/8 1/8 250 0.1
6410038 6202109EN 6410038DC 6990109 3/8 3/4 7/16 7/8 5/8 1/8 250 0.1
6410044 6202110EN 6410044DC 6990110 7/16 7/8 1/2 1 3/4 3/16 390 0.1
6410050 6202112EN 6410050DC 6990112 1/2 7/8 1/2 1 3/4 3/16 390 0.1
6410056 6202114EN 6410056DC 6990114 9/16 1 5/8 1 1/8 7/8 3/16 585 0.1
6410063 6202115EN 6410063DC 6990115 5/8 1 5/8 1 1/8 7/8 3/16 585 0.1

POWER TRANSMISSION
Mt† Th Ph* MULTIPLIERS The data in the Performance Data Table is for
Steel 1.0
a steel unit. To obtain data for other materials,
Maximum Transmitted
Hub use the multiplier provided.
d Torque Thrust Pressure Electroless Nickel
(inch) (in lb) (lbs) (psi)
Plated Steel 0.8 For example, you require a 1/4" (d) Electroless
1/8 91 1459 16513
Thin Dense Chrome Nickel Plated Trantorque Mini.
3/16 137 1459 16513
Coated Steel 1.0
1/4 182 1459 16513
Find 1/4" (d) in Performance Data Table and
Stainless
5/16 366 2345 18960 use the multiplier of 0.8 for Electroless Nickel
Steel 0.35
3/8 440 2345 18960 Plated Steel.
7/16 669 3057 18535
1/2 764 3057 18535 Mt : 182 x 0.8 = 146

9/16 1110 3948 16754
Th : 1459 x 0.8 = 1167
*Ph : 16513 x 0.8 = 13210
5/8 1234 3948 16754
* IMPORTANT:
† When installing Trantorque Mini with

an open-ended wrench, a reduction
in installation torque by 50% is
recommended. This will result in a
Transmitted Torque (Mt) reduced by 50%.
Trantorque®
Mini
Metric
TOLERANCE (TL)
TL for shaft and bore is ± .04mm for all sizes
Trantorque Mini – Metric

Wrench
Electroless
Nickel Thin Dense Install Shipping
Plated Chrome Stainless d D L L1 A B Torque Weight
Steel Steel Coated Steel Steel (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (kg)
TTQM0316 TTQM0316EN TTQM0316DC TTQM0316SS 3 16 10 19 13 3 14 0.02
POWER TRANSMISSION
Mt† Th Ph * MULTIPLIERS The data in the Performance Data Table is for
Steel 1.0
Maximum Transmitted
Hub
use the multiplier provided.
d Torque Thrust Pressure Electroless Nickel
(mm) (Nm) (kN) (N/mm2)
Plated Steel 0.8 For example, you require a 8mm (d) Electroless
3 10 6 112
Thin Dense Chrome Nickel Plated Trantorque Mini.
4 13 6 112
Coated Steel 1.0
5 16 6 112 Find 8mm (d) in Performance Data Table and
Stainless
6 19 6 112 use the multiplier of 0.8 for Electroless Nickel
Steel 0.35
7 36 10 123 Plated Steel.
8 41 10 123
9 47 10 123
Mt : 41 x 0.8 = 33
Th : 10 x 0.8 = 8
10 68 14 123
*Ph : 123 x 0.8 = 98
11 75 14 123
12 81 14 123 * IMPORTANT:
14 123 18 113
15 132 18 113
16 140 18 113
† When installing Trantorque Mini with

Trantorque®
OE
Inch
TOLERANCE (TL)

for all sizes
Trantorque OE – Inch
Wrench
Thin Dense
Electroless Chrome Install Shipping
Nickel Coated Stainless d D L L1 A B Torque Weight
Steel Plated Steel Steel Steel (inch) (inch) (inch) (inch) (inch) (inch) (ft lb) (lb)
6410069 6410069EN 6410069DC 6410069SS 11/16 1 1/4 7/8 1 5/32 1 1/8 1/4 82 0.2
6410075 6410075EN 6410075DC 6410075SS 3/4 1 1/4 7/8 1 5/32 1 1/8 1/4 82 0.2
6410081 6410081EN 6410081DC 6410081SS 13/16 1 3/8 15/16 1 1/4 1 1/4 1/4 111 0.2
6410088 6410088EN 6410088DC 6410088SS 7/8 1 3/8 15/16 1 1/4 1 1/4 1/4 111 0.2
6410094 6410094EN 6410094DC 6410094SS 15/16 1 1/2 1 1 11/32 1 3/8 5/16 137 0.4
6410100 6410100EN 6410100DC 6410100SS 1 1 1/2 1 1 11/32 1 3/8 5/16 137 0.3
6410106 6410106EN 6410106DC 6410106SS 1 1/16 1 5/8 1 1/16 1 15/32 1 1/2 3/8 155 0.4
6410113 6410113EN 6410113DC 6410113SS 1 1/8 1 5/8 1 1/16 1 15/32 1 1/2 3/8 155 0.4
6410119 6410119EN 6410119DC 6410119SS 1 3/16 1 3/4 1 1/8 1 19/32 1 5/8 7/16 177 0.5
6410125 6410125EN 6410125DC 6410125SS 1 1/4 1 3/4 1 1/8 1 19/32 1 5/8 7/16 177 0.5
6410131 6410131EN 6410131DC 6410131SS 1 5/16 1 7/8 1 3/16 1 11/16 1 3/4 1/2 196 0.6
6410138 6410138EN 6410138DC 6410138SS 1 3/8 1 7/8 1 3/16 1 11/16 1 3/4 1/2 196 0.6
6410144 6410144EN 6410144DC 6410144SS 1 7/16 2 1 1/4 1 25/32 1 7/8 1/2 196 0.7
6410150 6410150EN 6410150DC 6410150SS 1 1/2 2 1 1/4 1 25/32 1 7/8 1/2 196 0.6

POWER TRANSMISSION
Mt† Th Ph * The data in the Performance Data Table is for

Maximum Transmitted MULTIPLIERS
d Torque Thrust Pressure Steel 1.0
(inch) (ft lb) (lbs) (psi)
11/16 162 5639 20247 Electroless Nickel For example, you require a 1" (d) Electroless
Plated Steel 0.6 Nickel Plated Trantorque OE.
3/4 176 5639 20247
13/16 231 6816 20136 Thin Dense Chrome Find 1" (d) in Performance Data Table and
7/8 248 6816 20136 Coated Steel 0.9 use the multiplier of 0.6 for Electroless Nickel
15/16 297 7601 18746 Stainless Plated Steel.
1 317 7601 18746 Steel 0.3
1 1/16 348 7868 16466 Mt : 317 x 0.6 = 190
1 1/8 369 7868 16466
Th : 7601 x 0.6 = 4561
*Ph : 18746 x 0.6 = 11248
1 3/16 409 8267 14865
1 1/4 431 8267 14865 * IMPORTANT:

1 5/16 463 8463 13259 After hub pressure (Ph) is determined,
1 3/8 485 8463 13259
1 7/16 473 7878 10838
1 1/2 492 7878 10838
† When installing Trantorque OE with

Trantorque®
OE
Metric
TOLERANCE (TL)
TL for shaft and bore is ± .08mm

for all sizes
Trantorque OE – Metric
Wrench
Electroless Thin Dense Install Shipping

Nickel Chrome Stainless d D L L1 A B Torque Weight
Steel Plated Steel Coated Steel Steel (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (kg)
POWER TRANSMISSION
Mt† Th Ph * The data in the Performance Data Table is for
Maximum Transmitted MULTIPLIERS
(mm) (Nm) (kN) (N/mm2) Steel 1.0
For example, you require a 20mm (d)
17 211 25 137 Electroless Nickel
Electroless Nickel Plated Trantorque OE.
18 223 25 137 Plated Steel 0.6
19 236 25 137 Thin Dense Chrome Find 20mm (d) in Performance Data Table and
20 303 30 138 Coated Steel 0.9 use the multiplier of 0.6 for Electroless Nickel
22 333 30 138 Stainless Plated Steel.
24 405 34 129 Steel 0.3
25 422 34 129
Mt : 303 x 0.6 = 182
28 515 37 101
Th : 30 x 0.6 = 18
*Ph : 138 x 0.6 = 83
30 551 37 101
32 601 38 87 * IMPORTANT:
35 658 38 87
† When installing Trantorque OE with

Trantorque®
NT
Inch
TOLERANCE (TL)
TL for shaft and bore is .0015" for Part

A d D Numbers 6980103UP – 6980119UP
TL for shaft and bore is .003"

for all other Trantorque NT
B L
L1
Trantorque NT – Inch
Ma Mt Th Ph*
Part Wrench
Number Size Maximum Transmitted
Install Hub
d D L L1 A B Torque Torque Thrust Pressure
Steel (inch) (inch) (inch) (inch) (inch) (inch) (in lb) (ft lb) (lbs) (psi)
6980103UP 3/16 5/8 3/8 1 1/16 1/2 1/8 125 7 839 9496
6980105UP 1/4 5/8 3/8 1 1/16 1/2 1/8 125 9 839 9496
6980107UP 5/16 3/4 7/16 1 3/16 5/8 1/8 150 11 809 6542
6980109UP 3/8 3/4 7/16 1 3/16 5/8 1/8 150 13 809 6542
6980110UP 7/16 7/8 1/2 1 5/16 3/4 3/16 175 14 789 4783
6980112UP 1/2 7/8 1/2 1 5/16 3/4 3/16 175 16 789 4783
6980114UP 9/16 1 5/8 1 7/16 7/8 3/16 200 18 776 3294
6980115UP 5/8 1 5/8 1 7/16 7/8 3/16 200 20 776 3294
6980119UP 3/4 1 1/4 3/4 1 11/16 1 1/16 1/4 700 70 2227 6301
6980120UP 5/8 1 1/2 11/16 1 13/16 1 1/4 5/16 1200 87 3336 8580
6980140UP 11/16 1 1/2 11/16 1 13/16 1 1/4 5/16 1200 96 3336 8580
6980160UP 3/4 1 1/2 11/16 1 13/16 1 1/4 5/16 1200 104 3336 8580
6980190UP 13/16 1 3/4 13/16 2 3/16 1 1/2 7/16 1500 116 3441 6420
6980200UP 7/8 1 3/4 13/16 2 3/16 1 1/2 7/16 1500 125 3441 6420
6980220UP 15/16 1 3/4 13/16 2 3/16 1 1/2 7/16 1500 134 3441 6420
6980240UP 1 1 3/4 13/16 2 3/16 1 1/2 7/16 1500 143 3441 6420
POWER TRANSMISSION
6980270UP 1 1/16 2 15/16 2 9/16 1 3/4 1/2 2000 175 3962 5605
6980280UP 1 1/8 2 15/16 2 9/16 1 3/4 1/2 2000 186 3962 5605
6980300UP 1 3/16 2 15/16 2 9/16 1 3/4 1/2 2000 196 3962 5605
6980320UP 1 1/4 2 15/16 2 9/16 1 3/4 1/2 2000 206 3962 5605
6980350UP 1 5/16 2 3/8 1 7/16 3 3/32 2 9/16 2300 215 3939 3060
6980360UP 1 3/8 2 3/8 1 7/16 3 3/32 2 9/16 2300 226 3939 3060
6980380UP 1 7/16 2 3/8 1 7/16 3 3/32 2 9/16 2300 236 3939 3060
6980400UP 1 1/2 2 3/8 1 7/16 3 3/32 2 9/16 2300 246 3939 3060
6980430UP 1 9/16 2 5/8 1 5/8 3 15/32 2 1/4 9/16 2800 278 4277 2659
6980440UP 1 5/8 2 5/8 1 5/8 3 15/32 2 1/4 9/16 2800 290 4277 2659
6980460UP 1 11/16 2 5/8 1 5/8 3 15/32 2 1/4 9/16 2800 301 4277 2659
6980480UP 1 3/4 2 5/8 1 5/8 3 15/32 2 1/4 9/16 2800 312 4277 2659
6980510UP 1 13/16 2 7/8 1 15/16 4 3/64 2 1/2 5/8 4900 508 6730 3205
6980520UP 1 7/8 2 7/8 1 15/16 4 3/64 2 1/2 5/8 4900 526 6730 3205
6980540UP 1 15/16 2 7/8 1 15/16 4 3/64 2 1/2 5/8 4900 543 6730 3205
6980560UP 2 2 7/8 1 15/16 4 3/64 2 1/2 5/8 4900 561 6730 3205
*IMPORTANT: Please refer to page 70 to calculate your minimum hub diameter.

Consult factory for weights and availability.
B-LOC ®
B109
Inch and
Locking screws transfer
to integrated push-off Metric
holes for disassembly.
Metric socket head

locking screws TOLERANCE (TL)
ISO 4762 grade 12.9
(See Ma for install Tolerance (TL) for shaft and bore
torque). is ± .001" (.025mm) for all sizes.
Screw head height = screw diameter (mm)
B109 — Inch
Ma Mt Th Ph
Locking Screws Maximum Transmitted

Install Hub Shipping
Part d D D1 L L1 L2 Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) (inch) (inch) Qty Size (in lb) (in lb) (lbs) (psi) (lb)
T902004 1/4 13/16 15/16 0.394 0.650 0.516 3 M4 x 12 36.0 167 1336 11073 0.1
T902005 5/16 7/8 1 0.394 0.650 0.516 3 M4 x 12 42.5 246 1572 12096 0.1
T902006 3/8 15/16 1 1/16 0.394 0.650 0.516 3 M4 x 12 42.5 295 1572 11290 0.1
B902008 1/2 1 1/16 1 3/16 0.394 0.650 0.516 4 M4 x 12 42.5 524 2096 13282 0.1
T902010 5/8 1 3/16 1 5/16 0.472 0.807 0.594 6 M4 x 14 42.5 983 3144 14880 0.2
B902012 3/4 1 5/16 1 7/16 0.472 0.807 0.594 6 M4 x 14 42.5 1179 3144 13463 0.2
T902014 7/8 1 9/16 1 3/4 0.591 0.984 0.754 6 M5 x 18 87.0 2264 5174 14863 0.4
B902100 1 1 11/16 1 7/8 0.591 0.984 0.754 8 M5 x 18 87.0 3449 6899 18349 0.4
T902102 1 1/8 1 7/8 2 0.669 1.102 0.829 9 M5 x 18 87.0 4366 7761 16412 0.6
T902103 1 3/16 1 15/16 2 1/16 0.669 1.102 0.829 10 M5 x 18 87.0 5120 8623 17647 0.6
B902104 1 1/4 2 2 1/8 0.669 1.102 0.829 10 M5 x 18 87.0 5390 8623 17096 0.6
B902106 1 3/8 2 1/8 2 1/4 0.669 1.102 0.829 10 M5 x 18 87.0 5929 8623 16090 0.6
B109 — Metric
Ma Mt Th Ph
POWER TRANSMISSION
Number (mm) (mm) (mm) (mm) (mm) (mm) Qty Size (Nm) (Nm) (N) (N/mm2) (kg)
T901006 6 20.64 23.81 10 16.5 13.1 3 M4 x 12 4.3 19 6192 80 0.05
T901008 8 22.23 25.40 10 16.5 13.1 3 M4 x 12 5 29 7285 87 0.05
B901010 10 23.81 27.00 10 16.5 13.1 3 M4 x 12 5 36 7285 81 0.05
T901011 11 26.99 30.16 10 16.5 13.1 4 M4 x 12 5 53 9713 95 0.05
T901012 12 26.99 30.16 10 16.5 13.1 4 M4 x 12 5 58 9713 95 0.05
T901014 14 30.16 33.34 12 20.5 15.1 6 M4 x 14 5 102 14569 107 0.05
T901015 15 30.16 33.34 12 20.5 15.1 6 M4 x 14 5 109 14569 107 0.09
T901016 16 30.16 33.34 12 20.5 15.1 6 M4 x 14 5 117 14569 107 0.09
T901019 19 33.34 36.51 12 20.5 15.1 6 M4 x 14 5 138 14569 97 0.09
T901020 20 39.69 44.45 15 25 19.2 6 M5 x 18 10 234 23414 104 0.18
T901022 22 39.69 44.45 15 25 19.2 6 M5 x 18 10 258 23414 104 0.18
T901024 24 42.86 47.62 15 25 19.2 8 M5 x 18 10 375 31219 129 0.18
T901025 25 42.86 47.62 15 25 19.2 8 M5 x 18 10 390 31219 129 0.18
T901028 28 47.62 50.80 17 28 21.06 9 M5 x 18 10 492 35121 115 0.27
T901030 30 49.21 52.39 17 28 21.06 10 M5 x 18 10 585 39024 124 0.27
T901032 32 50.80 53.97 17 28 21.06 10 M5 x 18 10 624 39024 120 0.27
T901035 35 53.98 57.15 17 28 21.06 10 M5 x 18 10 683 39024 113 0.27
B-LOC ®
B103
L1
L2
L
TOLERANCE (TL)
Inch Locking screws transfer
to integrated push-off
holes for disassembly.
Bore diameter machined to D -0/+TL
TL = .002" for bores up to 4.724"
.003" for bores up to 12.008"
.004" for bores over 12.008"
d = Shaft diameter machined to d +0/-TL

d D
Metric socket head locking

screws
ISO 4762 grade 12.9
(See Ma for install torque).
Note: Flange of Series B103 locking

assemblies should be located inside
Screw head height = screw diameter (mm) of hub bore.
B103 — Inch
Ma Mt Th Ph
Part d D L L1 L2 Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) (inch) Qty Size (ft lb) (ft lb) (lbs) (psi) (lb)
B302012 3/4 1.850 0.669 1.122 0.886 5 M6 x 20 10 247 7918 16959 0.6
T302014 7/8 1.850 0.669 1.122 0.886 5 M6 x 20 10 289 7918 16959 0.6
B302100 1 1.969 0.669 1.122 0.886 6 M6 x 20 10 396 9502 19130 0.7
B302102 1 1/8 2.165 0.669 1.122 0.886 6 M6 x 20 10 445 9502 17391 0.8
B302103 1 3/16 2.165 0.669 1.122 0.886 6 M6 x 20 10 470 9502 17391 0.7
B302104 1 1/4 2.362 0.669 1.122 0.886 8 M6 x 20 10 660 12669 21256 0.9
B302106 1 3/8 2.362 0.669 1.122 0.886 8 M6 x 20 10 726 12669 21256 0.8
B302107 1 7/16 2.559 0.669 1.122 0.886 8 M6 x 20 10 759 12669 19621 1.0
B302108 1 1/2 2.559 0.669 1.122 0.886 8 M6 x 20 10 792 12669 19621 1.0
B302110 1 5/8 2.953 0.787 1.358 1.043 7 M8 x 25 25 1439 21250 24245 1.7
T302111 1 11/16 2.953 0.787 1.358 1.043 7 M8 x 25 25 1494 21250 24245 1.6
B302112 1 3/4 2.953 0.787 1.358 1.043 7 M8 x 25 25 1550 21250 24245 1.6
T302114 1 7/8 3.150 0.787 1.358 1.043 7 M8 x 25 25 1660 21250 22729 1.8
B302115 1 15/16 3.150 0.787 1.358 1.043 7 M8 x 25 25 1716 21250 22729 1.7
B302200 2 3.150 0.787 1.358 1.043 7 M8 x 25 25 1771 21250 22729 1.6
T302202 2 1/8 3.346 0.787 1.358 1.043 8 M8 x 25 25 2150 24286 24448 1.9
B302203 2 3/16 3.346 0.787 1.358 1.043 8 M8 x 25 25 2214 24286 24448 1.8
B302204 2 1/4 3.543 0.787 1.358 1.043 8 M8 x 25 25 2277 24286 23090 2.1
T302206 2 3/8 3.543 0.787 1.358 1.043 8 M8 x 25 25 2403 24286 23090 1.9
POWER TRANSMISSION
B302207 2 7/16 3.740 0.787 1.358 1.043 9 M8 x 25 25 2775 27322 24609 2.2
B302208 2 1/2 3.740 0.787 1.358 1.043 9 M8 x 25 25 2846 27322 24609 2.2
T302209 2 9/16 3.740 0.787 1.358 1.043 9 M8 x 25 25 2917 27322 24609 2.1
T302211 2 11/16 4.331 0.945 1.594 1.201 8 M10 x 30 50 4411 39387 25532 3.8
T302212 2 3/4 4.331 0.945 1.594 1.201 8 M10 x 30 50 4513 39387 25532 3.7
T302214 2 7/8 4.528 0.945 1.594 1.201 8 M10 x 30 50 4718 39387 24422 4.0
B302215 2 15/16 4.528 0.945 1.594 1.201 8 M10 x 30 50 4821 39387 24422 3.9
B302300 3 4.724 0.945 1.594 1.201 8 M10 x 30 50 4923 39387 23404 4.4
T302304 3 1/4 4.921 0.945 1.594 1.201 9 M10 x 30 50 6000 44311 25277 4.5
T302306 3 3/8 4.921 0.945 1.594 1.201 9 M10 x 30 50 6231 44311 25277 4.3
B302307 3 7/16 5.118 0.945 1.594 1.201 9 M10 x 30 50 6347 44311 24305 4.8
T302308 3 1/2 5.118 0.945 1.594 1.201 9 M10 x 30 50 6462 44311 24305 4.6
T302312 3 3/4 5.315 0.945 1.594 1.201 10 M10 x 30 50 7693 49234 26005 4.7
T302315 3 15/16 5.709 1.024 1.772 1.299 8 M12 x 35 90 9944 60608 27512 6
T302400 4 5.709 1.024 1.772 1.299 8 M12 x 35 90 10101 60608 27512 6
T302407 4 7/16 6.102 1.024 1.772 1.299 8 M12 x 35 90 11206 60608 25737 6
T302412 4 3/4 6.496 1.024 1.772 1.299 9 M12 x 35 90 13495 68184 27200 7
T302415 4 15/16 7.087 1.339 2.165 1.614 9 M14 x 40 135 18113 88043 24620 11
B302500 5 7.087 1.339 2.165 1.614 9 M14 x 40 135 18342 88043 24620 11
T302507 5 7/16 7.480 1.339 2.165 1.614 9 M14 x 40 135 19947 88043 23324 12
T302515 5 15/16 7.874 1.339 2.165 1.614 10 M14 x 40 135 24202 97825 24620 12
T302607 6 7/16 8.858 1.732 2.559 2.008 12 M14 x 40 135 31488 117391 20292 20
T302615 6 15/16 9.252 1.732 2.559 2.008 12 M14 x 40 135 33933 117391 19429 20
B302700 7 9.252 1.732 2.559 2.008 12 M14 x 40 135 34239 117391 19429 20
T302707 7 7/16 9.843 1.732 2.559 2.008 15 M14 x 40 135 45474 146738 22829 22
T302715 7 15/16 10.236 1.732 2.559 2.008 15 M14 x 40 135 48531 146738 21951 23
T302800 8 10.236 1.732 2.559 2.008 15 M14 x 40 135 48913 146738 21951 21
B-LOC ®
B103
Metric
TOLERANCE (TL)

TL = .05mm for bores up to 120mm
.08mm for bores up to 305mm
.10mm for bores over 305mm
B103 — Metric
Ma Mt Th Ph

Part d D L L1 L2 Torque Torque Thrust Pressure Weight
Number (mm) (mm) (mm) (mm) (mm) Qty Size (Nm) (Nm) (N) (N/mm2) (kg)
T301015 15 32 14 21.5 18 4 M4 x 12 5 115 15390 91 0.1
T301018 18 47 17 28.5 22.5 5 M6 x 20 14 327 36371 121 0.3
T301019 19 47 17 28.5 22.5 5 M6 x 20 14 346 36371 121 0.3
T301020 20 47 17 28.5 22.5 5 M6 x 20 14 364 36371 121 0.3
T301022 22 47 17 28.5 22.5 5 M6 x 20 14 400 36371 121 0.2
T301024 24 50 17 28.5 22.5 6 M6 x 20 14 524 43645 136 0.3
B301025 25 50 17 28.5 22.5 6 M6 x 20 14 546 43645 136 0.3
T301028 28 55 17 28.5 22.5 6 M6 x 20 14 611 43645 124 0.3
B301030 30 55 17 28.5 22.5 6 M6 x 20 14 655 43645 124 0.3
T301032 32 60 17 28.5 22.5 8 M6 x 20 14 931 58193 151 0.4
B301035 35 60 17 28.5 22.5 8 M6 x 20 14 1018 58193 151 0.3
T301038 38 65 17 28.5 22.5 8 M6 x 20 14 1106 58193 140 0.4
B301040 40 65 17 28.5 22.5 8 M6 x 20 14 1164 58193 140 0.4
T301042 42 75 20 34.5 26.5 7 M8 x 25 34 1991 94822 168 0.7
B301045 45 75 20 34.5 26.5 7 M8 x 25 34 2133 94822 168 0.6
B301050 50 80 20 34.5 26.5 7 M8 x 25 34 2371 94822 157 0.7
T301055 55 85 20 34.5 26.5 8 M8 x 25 34 2980 108368 169 0.8
B301060 60 90 20 34.5 26.5 8 M8 x 25 34 3251 108368 160 0.8
T301065 65 95 20 34.5 26.5 9 M8 x 25 34 3962 121914 170 0.9
POWER TRANSMISSION
B301070 70 110 24 40.5 30.5 8 M10 x 30 68 6151 175750 177 1.6
T301075 75 115 24 40.5 30.5 8 M10 x 30 68 6591 175750 169 1.6
T301080 80 120 24 40.5 30.5 8 M10 x 30 68 7030 175750 162 1.7
B301085 85 125 24 40.5 30.5 9 M10 x 30 68 8403 197719 175 1.8
B301090 90 130 24 40.5 30.5 9 M10 x 30 68 8897 197719 168 1.9
T301095 95 135 24 40.5 30.5 10 M10 x 30 68 10435 219688 180 2
B301100 100 145 26 45 33 8 M12 x 35 122 13478 269557 190 3
T301110 110 155 26 45 33 8 M12 x 35 122 14826 269557 177 3
B301120 120 165 26 45 33 9 M12 x 35 122 18195 303251 188 3
T301130 130 180 34 55 41 9 M14 x 40 183 25452 391574 170 5
T301140 140 190 34 55 41 9 M14 x 40 183 27410 391574 161 5
T301150 150 200 34 55 41 10 M14 x 40 183 32631 435082 170 5
T301160 160 210 34 55 41 11 M14 x 40 183 38287 478591 178 6
T301170 170 225 44 65 51 12 M14 x 40 183 44378 522099 140 8
T301180 180 235 44 65 51 12 M14 x 40 183 46989 522099 134 8
T301190 190 250 44 65 51 15 M14 x 40 183 61999 652624 157 9
T301200 200 260 44 65 51 15 M14 x 40 183 65262 652624 151 10
T301220 220 285 50 73 57 12 M16 x 45 297 82145 746770 139 13
T301240 240 305 50 73 57 15 M16 x 45 297 112016 933463 162 14
T301260 260 325 50 73 57 18 M16 x 45 297 145620 1120155 183 15
T301280 280 355 60 85 67 16 M18 x 50 393 163726 1169473 146 23
T301300 300 375 60 85 67 18 M18 x 50 393 197349 1315657 155 24
T301320 320 405 74 102 82 18 M20 x 50 569 274346 1714665 152 34
T301340 340 425 74 102 82 21 M20 x 50 569 340075 2000443 169 36
T301360 360 455 86 116 94 18 M22 x 60 759 377769 2098718 142 49
T301380 380 475 86 116 94 21 M22 x 60 759 465216 2448505 159 52
T301400 400 495 86 116 94 21 M22 x 60 759 489701 2448505 153 55
B-LOC ® L1
B106
L2
L
Locking screws transfer TOLERANCE (TL)

Inch to integrated push-off
holes for disassembly. Bore dia. machined to D -0/+TL
TL = .002” for bores up to 4.724”
.003” for bores up to 12.008”
.004” for bores over 12.008”
D1 d D d = Shaft diameter machined to d +0/-TL
Metric socket head locking

screws
ISO 4762 grade 12.9
(See Ma for install torque).
B106 — Inch
Ma Mt Th Ph

Number (inch) (inch) (inch) (inch) (inch) (inch) Qty Size (ft lb) (ft lb) (lbs) (psi) (lb)
T602010 5/8 1.260 1.457 0.551 0.846 0.709 4 M4 x 12 3.5 55 2096 8007 0.6
B602012 3/4 1.850 2.047 0.669 1.122 0.886 5 M6 x 20 12 187 5997 12845 0.6
B602014 7/8 1.850 2.047 0.669 1.122 0.886 5 M6 x 20 12 219 5997 12845 0.7
T602015 15/16 1.969 2.224 0.669 1.122 0.886 5 M6 x 20 12 234 5997 12071 0.6
B602100 1 1.969 2.224 0.669 1.122 0.886 6 M6 x 20 12 300 7196 14489 0.7
B602102 1 1/8 2.165 2.421 0.669 1.122 0.886 6 M6 x 20 12 337 7196 13172 0.8
B602103 1 3/16 2.165 2.421 0.669 1.122 0.886 6 M6 x 20 12 356 7196 13172 0.7
B602104 1 1/4 2.362 2.618 0.669 1.122 0.886 8 M6 x 20 12 500 9595 16099 0.9
B602106 1 3/8 2.362 2.618 0.669 1.122 0.886 8 M6 x 20 12 550 9595 16099 0.8
B602107 1 7/16 2.559 2.815 0.669 1.122 0.886 8 M6 x 20 12 575 9595 14860 1.0
B602108 1 1/2 2.559 2.815 0.669 1.122 0.886 8 M6 x 20 12 600 9595 14860 1.0
B602110 1 5/8 2.953 3.287 0.787 1.358 1.043 7 M8 x 25 30 1090 16094 18362 1.7
B602111 1 11/16 2.953 3.287 0.787 1.358 1.043 7 M8 x 25 30 1132 16094 18362 1.6
B602112 1 3/4 2.953 3.287 0.787 1.358 1.043 7 M8 x 25 30 1174 16094 18362 1.6
B602114 1 7/8 3.150 3.484 0.787 1.358 1.043 7 M8 x 25 30 1257 16094 17214 1.8
B602115 1 15/16 3.150 3.484 0.787 1.358 1.043 7 M8 x 25 30 1299 16094 17214 1.7
B602200 2 3.150 3.484 0.787 1.358 1.043 7 M8 x 25 30 1341 16094 17214 1.6
T602202 2 1/8 3.346 3.681 0.787 1.358 1.043 8 M8 x 25 30 1629 18393 18516 1.9
B602203 2 3/16 3.346 3.681 0.787 1.358 1.043 8 M8 x 25 30 1676 18393 18516 1.8
POWER TRANSMISSION
B602204 2 1/4 3.543 3.898 0.787 1.358 1.043 8 M8 x 25 30 1724 18393 17487 2.1
B602206 2 3/8 3.543 3.898 0.787 1.358 1.043 8 M8 x 25 30 1820 18393 17487 1.9
B602207 2 7/16 3.740 4.016 0.787 1.358 1.043 9 M8 x 25 30 2102 20693 18638 2.2
B602208 2 1/2 3.740 4.016 0.787 1.358 1.043 9 M8 x 25 30 2155 20693 18638 2.2
T602209 2 9/16 3.740 4.016 0.787 1.358 1.043 9 M8 x 25 30 2209 20693 18638 2.1
T602211 2 11/16 4.331 4.685 0.945 1.594 1.201 8 M10 x 30 60 3340 29831 19337 3.8
B602212 2 3/4 4.331 4.685 0.945 1.594 1.201 8 M10 x 30 60 3418 29831 19337 3.7
B602214 2 7/8 4.528 4.882 0.945 1.594 1.201 8 M10 x 30 60 3573 29831 18496 4.0
B602215 2 15/16 4.528 4.882 0.945 1.594 1.201 8 M10 x 30 60 3651 29831 18496 3.9
B602300 3 4.724 5.079 0.945 1.594 1.201 8 M10 x 30 60 3729 29831 17726 4.4
B602304 3 1/4 4.921 5.276 0.945 1.594 1.201 9 M10 x 30 60 4545 33559 19144 4.5
T602306 3 3/8 4.921 5.276 0.945 1.594 1.201 9 M10 x 30 60 4719 33559 19144 4.3
B602307 3 7/16 5.118 5.472 0.945 1.594 1.201 9 M10 x 30 60 4807 33559 18408 4.8
B602308 3 1/2 5.118 5.472 0.945 1.594 1.201 9 M10 x 30 60 4894 33559 18408 4.6
T602312 3 3/4 5.315 5.669 0.945 1.594 1.201 10 M10 x 30 60 5826 37288 19695 4.7
T602315 3 15/16 5.709 6.063 1.024 1.772 1.299 8 M12 x 35 105 7322 44627 20258 6
B602400 4 5.709 6.063 1.024 1.772 1.299 8 M12 x 35 105 7438 44627 20258 6
B602407 4 7/16 6.102 6.457 1.024 1.772 1.299 8 M12 x 35 105 8251 44627 18951 6
T602412 4 3/4 6.496 6.850 1.024 1.772 1.299 9 M12 x 35 105 9936 50205 20028 7
B602415 4 15/16 7.087 7.441 1.339 2.165 1.614 9 M14 x 40 166 14057 68327 19106 11
T602500 5 7.087 7.441 1.339 2.165 1.614 9 M14 x 40 166 14235 68327 19106 11
B602507 5 7/16 7.480 7.835 1.339 2.165 1.614 9 M14 x 40 166 15480 68327 18101 12
B602515 5 15/16 7.874 8.228 1.339 2.165 1.614 10 M14 x 40 166 18782 75918 19106 12
B602607 6 7/16 8.858 9.213 1.732 2.559 2.008 12 M14 x 40 166 24436 91102 15748 20
T602615 6 15/16 9.252 9.606 1.732 2.559 2.008 12 M14 x 40 166 26334 91102 15078 20
B602700 7 9.252 9.606 1.732 2.559 2.008 12 M14 x 40 166 26571 91102 15078 20
B602707 7 7/16 9.843 10.197 1.732 2.559 2.008 15 M14 x 40 166 35290 113878 17717 22
T602715 7 15/16 10.236 10.591 1.732 2.559 2.008 15 M14 x 40 166 37663 113878 17035 23
T602800 8 10.236 10.591 1.732 2.559 2.008 15 M14 x 40 166 37959 113878 17035 21
B-LOC ®
B106
Metric
Spacer
Spacer Sleeve Sleeve
Note: Series B106 also available with optional
TOLERANCE (TL) integrated spacer sleeve (ideal for
very narrow drive elements). Spacers
Bore diameter machined to D -0/+TL are 0.275" wide for B106 sizes with
TL = .05mm for bores up to 120mm D = 2.559" (65mm) and smaller, and
.08mm for bores up to 305mm 0.315" wide for all others.
B106 — Metric
Ma Mt Th Ph
Locking Screws Install Maximum Transmitted Hub Shipping

Number (mm) (mm) (mm) (mm) (mm) (mm) Qty Size (Nm) (Nm) (N) (N/mm2) (kg)
T601014 14 28 32 14 20.5 17 4 M4 x 12 5 68 9713 66 0.1
T601015 15 28 32 14 20.5 17 4 M4 x 12 5 73 9713 66 0.1
T601018 18 47 52 17 28.5 22.5 5 M6 x 20 16 236 26234 87 0.3
T601019 19 47 52 17 28.5 22.5 5 M6 x 20 16 249 26234 87 0.3
T601020 20 47 52 17 28.5 22.5 5 M6 x 20 16 262 26234 87 0.3
B601022 22 47 52 17 28.5 22.5 5 M6 x 20 16 289 26234 87 0.3
T601024 24 50 56.5 17 28.5 22.5 6 M6 x 20 16 378 31481 98 0.3
B601025 25 50 56.5 17 28.5 22.5 6 M6 x 20 16 394 31481 98 0.3
B601028 28 55 61.5 17 28.5 22.5 6 M6 x 20 16 441 31481 89 0.4
B601030 30 55 61.5 17 28.5 22.5 6 M6 x 20 16 472 31481 89 0.3
T601032 32 60 66.5 17 28.5 22.5 8 M6 x 20 16 672 41975 109 0.4
B601035 35 60 66.5 17 28.5 22.5 8 M6 x 20 16 735 41975 109 0.4
T601038 38 65 71.5 17 28.5 22.5 8 M6 x 20 16 798 41975 101 0.5
B601040 40 65 71.5 17 28.5 22.5 8 M6 x 20 16 839 41975 101 0.5
T601042 42 75 83.5 20 34.5 26.5 7 M8 x 25 41 1515 72167 128 0.8
B601045 45 75 83.5 20 34.5 26.5 7 M8 x 25 41 1624 72167 128 0.7
T601048 48 80 88.5 20 34.5 26.5 7 M8 x 25 41 1732 72167 120 0.8
B601050 50 80 88.5 20 34.5 26.5 7 M8 x 25 41 1804 72167 120 0.8
B601055 55 85 93.5 20 34.5 26.5 8 M8 x 25 41 2268 82476 129 0.8
B601060 60 90 98 20 34.5 26.5 8 M8 x 25 41 2474 82476 122 0.9
POWER TRANSMISSION
T601063 63 95 102 20 34.5 26.5 9 M8 x 25 41 2923 92786 130 0.9
T601065 65 95 102 20 34.5 26.5 9 M8 x 25 41 3016 92786 130 0.9
T601070 70 110 119 24 40.5 30.5 8 M10 x 30 81 4624 132127 133 1.7
B601075 75 115 124 24 40.5 30.5 8 M10 x 30 81 4955 132127 127 1.8
B601080 80 120 129 24 40.5 30.5 8 M10 x 30 81 5285 132127 122 1.9
T601085 85 125 134 24 40.5 30.5 9 M10 x 30 81 6317 148643 131 2
B601090 90 130 139 24 40.5 30.5 9 M10 x 30 81 6689 148643 126 2
T601095 95 135 144 24 40.5 30.5 10 M10 x 30 81 7845 165159 135 2
B601100 100 145 154 26 45 33 8 M12 x 35 142 9901 198016 139 3
B601110 110 155 164 26 45 33 8 M12 x 35 142 10891 198016 130 3
B601120 120 165 174 26 45 33 9 M12 x 35 142 13366 222768 138 3
T601130 130 180 189 34 55 41 9 M14 x 40 225 19751 303855 132 5
B601140 140 190 199 34 55 41 9 M14 x 40 225 21270 303855 125 5
T601150 150 200 209 34 55 41 10 M14 x 40 225 25321 337617 132 6
B601160 160 210 219 34 55 41 11 M14 x 40 225 29710 371379 138 6
B601170 170 225 234 44 65 51 12 M14 x 40 225 34437 405140 109 8
B601180 180 235 244 44 65 51 12 M14 x 40 225 36463 405140 104 9
T601190 190 250 259 44 65 51 15 M14 x 40 225 48110 506425 122 10
B601200 200 260 269 44 65 51 15 M14 x 40 225 50643 506425 117 10
T601220 220 285 294 50 73 57 12 M16 x 45 348 60747 552244 103 14
T601240 240 305 314 50 73 57 15 M16 x 45 348 82837 690305 120 15
T601260 260 325 334 50 73 57 18 M16 x 45 348 107688 828366 135 16
T601280 280 355 364 60 85 67 16 M18 x 50 475 124894 892098 111 23
T601300 300 375 384 60 85 67 18 M18 x 50 475 150542 1003610 118 25
T601320 320 405 414 74 102 82 18 M20 x 50 678 206318 1289490 114 35
T601340 340 425 434 74 102 82 21 M20 x 50 678 255749 1504405 127 37
T601360 360 455 464 86 116 94 18 M22 x 60 915 287427 1596815 108 51
T601380 380 475 484 86 116 94 21 M22 x 60 915 353961 1862951 121 53
T601400 400 495 504 86 116 94 21 M22 x 60 915 372590 1862951 116 57
B-LOC ®
B800
Locking screws transfer L1
to integrated push-off L2
holes for disassembly. L
Inch Metric socket head

locking screws
ISO 4762 grade 12.9
TOLERANCE (TL)
(See Ma for install
torque).
d D D2 D1 Bore diameter machined to D -0/+TL
d = Shaft diameter machined to d +0/-TL.
Integrated spacer sleeve included
B800 — Inch
Ma Mt Th Ph
Maximum
Locking Screws Install Transmitted Shipping
Hub
Part d D D1 D2 L L1 L2 Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) (inch) (inch) (inch) Qty Size (ft lb) (ft lb) (lbs) (psi) (lb)
B802004 1/4 0.551 0.984 0.906 0.394 0.866 0.748 3 M4 x 10 3.5 16 1572 19217 0.2
B802005 5/16 0.591 1.063 0.945 0.472 0.984 0.866 3 M4 x 10 3.5 20 1572 14947 0.3
B802006 3/8 0.630 1.142 1.024 0.551 1.063 0.945 4 M4 x 10 3.5 33 2096 16014 0.4
T82007 7/16 0.709 1.260 1.102 0.551 1.083 0.945 4 M4 x 10 3.5 38 2096 14235 0.5
B802008 1/2 0.906 1.496 1.299 0.551 1.083 0.945 4 M4 x 10 3.5 44 2096 11140 0.5
B802010 5/8 0.945 1.732 1.575 0.630 1.437 1.161 3 M6 x 16 12 94 3598 16036 0.6
B802012 3/4 1.063 1.929 1.693 0.709 1.555 1.280 4 M6 x 16 12 150 4798 16893 0.7
T82014 7/8 1.260 2.126 1.890 0.984 1.850 1.575 4 M6 x 16 12 175 4798 10263 0.8
B802015 15/16 1.339 2.205 1.969 0.984 1.850 1.575 6 M6 x 16 12 281 7196 14489 0.9
B802100 1 1.339 2.205 1.969 0.984 1.850 1.575 6 M6 x 16 12 300 7196 14489 0.9
B802102 1 1/8 1.535 2.402 2.165 0.984 1.850 1.575 6 M6 x 16 12 337 7196 12631 1.0
T82103 1 3/16 1.614 2.441 2.244 0.984 1.850 1.575 6 M6 x 16 12 356 7196 12015 1.1
B802104 1 1/4 1.693 2.559 2.323 0.984 1.850 1.575 8 M6 x 16 12 500 9595 15275 1.2
T82106 1 3/8 1.850 2.677 2.441 1.260 2.126 1.850 8 M6 x 18 12 550 9595 10918 1.4
B802107 1 7/16 1.969 2.835 2.598 1.260 2.126 1.850 8 M6 x 18 12 575 9595 10263 1.5
B802108 1 1/2 1.969 2.835 2.598 1.260 2.126 1.850 8 M6 x 18 12 600 9595 10263 1.5
B802110 1 5/8 2.165 3.071 2.795 1.260 2.126 1.850 8 M6 x 18 12 650 9595 9330 1.7
T82111 1 11/16 2.323 3.386 3.150 1.772 2.756 2.441 8 M8 x 22 30 1293 18393 11856 2.7
T82112 1 3/4 2.323 3.386 3.150 1.772 2.756 2.441 8 M8 x 22 30 1341 18393 11856 2.7
POWER TRANSMISSION
T82114 1 7/8 2.441 3.425 3.189 1.772 2.756 2.441 8 M8 x 22 30 1437 18393 11282 2.7
T82115 1 15/16 2.559 3.622 3.386 1.772 2.756 2.441 8 M8 x 22 30 1485 18393 10762 3.1
B802200 2 2.795 3.858 3.622 2.165 3.189 2.874 9 M8 x 22 30 1724 20693 9068 3.8
T82202 2 1/8 2.795 3.858 3.622 2.165 3.189 2.874 9 M8 x 22 30 1832 20693 9068 3.8
T82203 2 3/16 3.031 4.094 3.858 2.165 3.189 2.874 9 M8 x 22 30 1886 20693 8362 4.2
T82206 2 3/8 3.031 4.094 3.858 2.165 3.189 2.874 9 M8 x 22 30 2048 20693 8362 4.2
B802207 2 7/16 3.307 4.370 4.134 2.165 3.189 2.874 9 M8 x 22 30 2102 20693 7665 4.9
B802208 2 1/2 3.307 4.370 4.134 2.165 3.189 2.874 9 M8 x 22 30 2155 20693 7665 4.9
T82210 2 5/8 3.543 4.685 4.449 2.559 3.780 3.386 9 M10 x 25 60 3671 33559 9817 7
T82212 2 3/4 3.543 4.685 4.449 2.559 3.780 3.386 9 M10 x 25 60 3845 33559 9817 7
T82214 2 7/8 3.740 4.961 4.685 2.559 3.780 3.386 9 M10 x 25 60 4020 33559 9301 7
T82215 2 15/16 3.740 4.961 4.685 2.559 3.780 3.386 9 M10 x 25 60 4108 33559 9301 7
B802300 3 3.740 4.961 4.685 2.559 3.780 3.386 9 M10 x 25 60 4195 33559 9301 7
T82302 3 1/8 3.937 5.157 4.921 2.559 3.780 3.386 12 M10 x 25 60 5826 44746 11781 8
T82304 3 1/4 4.173 5.394 5.157 2.559 3.780 3.386 12 M10 x 25 60 6059 44746 11114 8
T82306 3 3/8 4.173 5.394 5.157 2.559 3.780 3.386 12 M10 x 25 60 6292 44746 11114 8
T82307 3 7/16 4.409 5.669 5.394 2.559 3.780 3.386 12 M10 x 25 60 6409 44746 10519 9
T82308 3 1/2 4.409 5.669 5.394 2.559 3.780 3.386 12 M10 x 25 60 6525 44746 10519 9
T82310 3 5/8 4.409 5.669 5.394 2.559 3.780 3.386 12 M10 x 25 60 6758 44746 10519 9
T82312 3 3/4 4.724 5.866 5.591 2.559 3.780 3.386 14 M10 x 25 60 8157 52204 11454 10
T82314 3 7/8 4.921 6.299 6.024 2.756 4.213 3.701 12 M12 x 30 105 10808 66940 13092 12
B802315 3 15/16 4.921 6.299 6.024 2.756 4.213 3.701 12 M12 x 30 105 10982 66940 13092 12
B802400 4 4.921 6.299 6.024 2.756 4.213 3.701 12 M12 x 30 105 11157 66940 13092 12
T82404 4 1/4 5.512 6.850 6.614 2.756 4.213 3.701 12 M12 x 30 105 11854 66940 11690 15
T82406 4 3/8 5.512 6.850 6.614 2.756 4.213 3.701 12 M12 x 30 105 12203 66940 11690 15
T82407 4 7/16 6.102 7.795 7.362 3.543 5.039 4.528 16 M12 x 30 105 16503 89254 10949 21
T82408 4 1/2 6.102 7.795 7.362 3.543 5.039 4.528 16 M12 x 30 105 16735 89254 10949 21
T82412 4 3/4 6.102 7.795 7.362 3.543 5.039 4.528 16 M12 x 30 105 17665 89254 10949 21
T82415 4 15/16 6.496 8.189 7.756 3.543 5.039 4.528 16 M12 x 30 105 18362 89254 10286 23
B-LOC ®
B800
Metric
TOLERANCE (TL)

d = Shaft diameter machined to d +0/-TL.
B800 — Metric
Ma Mt Th Ph

Part d D D1 D2 L L1 L2 Torque Torque Thrust Pressure Weight
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) Qty Size (Nm) (Nm) (N) (N/mm2) (kg)
T8006 6 14 25 23 10 22 19 3 M4 x 10 5 22 7285 138 0.1
T8007 7 15 27 24 12 25 22 3 M4 x 10 5 25 7285 107 0.1
T8008 8 15 27 24 12 25 22 3 M4 x 10 5 29 7285 107 0.1
T8009 9 16 29 26 14 27 24 4 M4 x 10 5 44 9713 115 0.1
B801010 10 16 29 26 14 27 24 4 M4 x 10 5 49 9713 115 0.1
T8011 11 18 32 28 14 28 24 4 M4 x 10 5 53 9713 102 0.1
T8012 12 18 32 28 14 28 24 4 M4 x 10 5 58 9713 102 0.1
B801014 14 23 38 33 14 28 24 4 M4 x 10 5 68 9713 80 0.1
T8015 15 24 44 40 16 37 30 3 M6 x 16 16 118 15740 109 0.2
B801016 16 24 44 40 16 37 30 3 M6 x 16 16 126 15740 109 0.2
B801018 18 26 47 42 18 40 33 4 M6 x 16 16 189 20987 119 0.3
B801019 19 27 49 43 18 40 33 4 M6 x 16 16 199 20987 115 0.3
B801020 20 28 50 44 18 40 33 4 M6 x 16 16 210 20987 110 0.3
B801022 22 32 54 48 25 47 40 4 M6 x 16 16 231 20987 70 0.4
B801024 24 34 56 50 25 47 40 6 M6 x 16 16 378 31481 98 0.4
B801025 25 34 56 50 25 47 40 6 M6 x 16 16 394 31481 98 0.4
T8028 28 39 61 55 25 47 40 6 M6 x 16 16 441 31481 86 0.4
B801030 30 41 62 57 25 47 40 6 M6 x 16 16 472 31481 81 0.4
B801032 32 43 65 59 25 47 40 8 M6 x 16 16 672 41975 104 0.5
POWER TRANSMISSION
T8035 35 47 68 62 32 54 47 8 M6 x 18 16 735 41975 74 0.5
B801038 38 50 72 66 32 54 47 8 M6 x 18 16 798 41975 70 0.6
B801040 40 53 75 69 32 54 47 8 M6 x 18 16 839 41975 66 0.7
T8042 42 55 78 71 32 54 47 8 M6 x 18 16 881 41975 63 0.7
T8045 45 59 86 80 45 70 62 8 M8 x 22 41 1856 82476 82 1.1
T8048 48 62 87 81 45 70 62 8 M8 x 22 41 1979 82476 78 1.1
T8050 50 65 92 86 45 70 62 8 M8 x 22 41 2062 82476 75 1.3
T8055 55 71 98 92 55 81 73 9 M8 x 22 41 2552 92786 63 1.6
T8060 60 77 104 98 55 81 73 9 M8 x 22 41 2783 92786 58 1.8
T8065 65 84 111 105 55 81 73 9 M8 x 22 41 3015 92786 53 2
T8070 70 90 119 113 65 96 86 9 M10 x 25 81 5203 148643 67 3
T8075 75 95 126 119 65 96 86 9 M10 x 25 81 5575 148643 64 3
T8080 80 100 131 125 65 96 86 12 M10 x 25 81 7928 198191 81 3
T8085 85 106 137 131 65 96 86 12 M10 x 25 81 8423 198191 76 4
B801090 90 112 144 137 65 96 86 12 M10 x 25 81 8919 198191 72 4
T8095 95 120 149 142 65 96 86 14 M10 x 25 81 10983 231223 79 4
T8100 100 125 160 153 70 107 94 12 M12 x 30 142 14851 297024 90 6
T8110 110 140 174 168 70 107 94 12 M12 x 30 142 16336 297024 80 7
T8120 120 155 198 187 90 128 115 16 M12 x 30 142 23762 396032 75 10
T8130 130 165 208 197 90 128 115 16 M12 x 30 142 25742 396032 71 11
Ls
B-LOC ® Metric socket head L1
B400
locking screws
ISO 4762 grade 12.9 L
(See Ma for install TOLERANCE (TL)
torque).
Inch
d D
(2) or (3) equally spaced
zinc chromate coated
screws provided solely to
indicate position of partial
pull out threads size dB.
B400 — Inch Screw head height = screw diameter (mm)
Ma Mt Th Ph
Locking Screws Install Maximum Transmitted

Hub Shipping
Part d D L L1 Ls Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) (inch) Qty Size (ft lb) dB (ft lb) (lbs) (psi) (lb)
B402012 3/4 1.850 0.669 0.787 1.024 8 M6 x 18 11 M8 234 7501 16067 0.5
B402014 7/8 1.850 0.669 0.787 1.024 8 M6 x 18 11 M8 273 7501 16067 0.5
B402100 1 1.969 0.669 0.787 1.024 9 M6 x 18 11 M8 352 8439 16991 0.5
B402102 1 1/8 2.165 0.669 0.787 1.024 10 M6 x 18 11 M8 440 9377 17162 0.6
T402103 1 3/16 2.159 0.669 0.787 1.024 10 M6 x 18 11 M8 464 9377 17212 0.6
B402104 1 1/4 2.362 0.669 0.787 1.024 12 M6 x 18 11 M8 586 11252 18880 0.7
T402106 1 3/8 2.365 0.669 0.787 1.024 12 M6 x 18 11 M8 645 11252 18856 0.6
B402107 1 7/16 2.559 0.669 0.787 1.024 14 M6 x 18 11 M8 786 13127 20331 0.8
B402108 1 1/2 2.559 0.669 0.787 1.024 14 M6 x 18 11 M8 820 13127 20331 0.7
B402110 1 5/8 2.953 0.787 0.945 1.260 12 M8 x 22 26 M10 1381 20393 23267 1.3
B402111 1 11/16 2.953 0.787 0.945 1.260 12 M8 x 22 26 M10 1434 20393 23267 1.2
B402112 1 3/4 2.953 0.787 0.945 1.260 12 M8 x 22 26 M10 1487 20393 23267 1.2
B402114 1 7/8 3.150 0.787 0.945 1.260 12 M8 x 22 26 M10 1593 20393 21812 1.3
B402115 1 15/16 3.150 0.787 0.945 1.260 12 M8 x 22 26 M10 1646 20393 21812 1.3
B402200 2 3.346 0.787 0.945 1.260 14 M8 x 22 26 M10 1983 23792 23951 1.5
B402202 2 1/8 3.346 0.787 0.945 1.260 14 M8 x 22 26 M10 2107 23792 23951 1.4
B402203 2 3/16 3.543 0.787 0.945 1.260 14 M8 x 22 26 M10 2169 23792 22622 1.6
B402204 2 1/4 3.543 0.787 0.945 1.260 14 M8 x 22 26 M10 2231 23792 22620 1.5
T402206 2 3/8 3.531 0.787 0.945 1.260 14 M8 x 22 26 M10 2354 23792 22699 1.4
B402207 2 7/16 3.740 0.787 0.945 1.260 16 M8 x 22 26 M10 2762 27191 24491 1.6
B402208 2 1/2 3.740 0.787 0.945 1.260 16 M8 x 22 26 M10 2832 27191 24491 1.6
T402209 2 9/16 3.737 0.787 0.945 1.260 16 M8 x 22 26 M10 2903 27191 24512 1.5
B402210 2 5/8 4.331 0.945 1.102 1.496 14 M10 x 25 51 M12 4139 37844 24532 2.8
POWER TRANSMISSION
B402211 2 11/16 4.331 0.945 1.102 1.496 14 M10 x 25 51 M12 4238 37844 24532 2.8
T402212 2 3/4 4.337 0.945 1.102 1.496 14 M10 x 25 51 M12 4336 37844 24496 2.7
T402214 2 7/8 4.528 0.945 1.102 1.496 14 M10 x 25 51 M12 4533 37844 23465 2.9
B402215 2 15/16 4.528 0.945 1.102 1.496 14 M10 x 25 51 M12 4632 37844 23465 2.8
B402300 3 4.724 0.945 1.102 1.496 14 M10 x 25 51 M12 4730 37844 22487 3.2
B402302 3 1/8 4.724 0.945 1.102 1.496 14 M10 x 25 51 M12 4928 37844 22487 3.0
T402304 3 1/4 4.921 0.945 1.102 1.496 16 M10 x 25 51 M12 5857 43250 24672 3.3
B402306 3 3/8 4.921 0.945 1.102 1.496 16 M10 x 25 51 M12 6082 43250 24672 3.1
B402307 3 7/16 5.118 0.945 1.102 1.496 16 M10 x 25 51 M12 6195 43250 23723 3.4
B402308 3 1/2 5.118 0.945 1.102 1.496 16 M10 x 25 51 M12 6307 43250 23723 3.4
T402312 3 3/4 5.305 0.945 1.102 1.496 18 M10 x 25 51 M12 7603 48656 25748 3.5
T402314 3 7/8 5.709 1.024 1.299 1.772 14 M12 x 30 91 M14 9320 57726 26204 4.8
T402315 3 15/16 5.709 1.024 1.299 1.772 14 M12 x 30 91 M14 9471 57726 26204 4.7
B402400 4 5.843 1.024 1.299 1.772 14 M12 x 30 91 M14 9621 57726 25602 5
T402403 4 3/16 6.102 1.024 1.299 1.772 14 M12 x 30 91 M14 10072 57726 24513 6
B402407 4 7/16 6.496 1.024 1.299 1.772 16 M12 x 30 91 M14 12198 65972 26317 6
B402408 4 1/2 6.496 1.024 1.299 1.772 16 M12 x 30 91 M14 12370 65972 26317 6
B402415 4 15/16 7.087 1.339 1.496 1.969 20 M12 x 35 91 M14 16966 82466 23060 8
T402500 5 7.087 1.339 1.496 1.969 20 M12 x 35 91 M14 17180 82466 23060 8
B402507 5 7/16 7.480 1.339 1.496 1.969 22 M12 x 35 91 M14 20552 90712 24031 9
T402508 5 1/2 7.492 1.339 1.496 1.969 22 M12 x 35 91 M14 20788 90712 23993 8
B402600 6 8.268 1.339 1.496 1.969 26 M12 x 35 91 M14 26801 107205 25695 10
T402607 6 7/16 8.858 1.496 1.732 2.283 22 M14 x 40 138 M16 31764 118419 23702 14
B402608 6 1/2 8.858 1.496 1.732 2.283 22 M14 x 40 138 M16 32072 118419 23702 13
B402615 6 15/16 9.252 1.496 1.732 2.283 24 M14 x 40 138 M16 37343 129185 24757 14
B402700 7 9.252 1.496 1.732 2.283 24 M14 x 40 138 M16 37679 129185 24757 14
T402708 7 1/2 9.823 1.811 2.047 2.598 28 M14 x 45 138 M16 47099 150716 22473 18
T402714 7 7/8 10.236 1.811 2.047 2.598 30 M14 x 45 138 M16 52986 161481 23106 19
T402715 7 15/16 10.504 1.811 2.047 2.598 30 M14 x 45 138 M16 53407 161481 22517 19
T402800 8 10.504 1.811 2.047 2.598 30 M14 x 45 138 M16 53827 161481 22517 19
TOLERANCE (TL)
B-LOC ®
B400
Metric
B400 — Metric
Ma Mt Th Ph
Part d D L L1 Ls Torque Torque Thrust Pressure Weight
Number (mm) (mm) (mm) (mm) (mm) Qty Size (Nm) dB (Nm) (N) (N/mm2) (kg)
T401018 18 47 17 20 26 8 M6 x 18 15 M8 302 33561 111 0.2
T401019 19 47 17 20 26 8 M6 x 18 15 M8 319 33561 111 0.2
B401020 20 47 17 20 26 8 M6 x 18 15 M8 335 33561 111 0.2
T401022 22 47 17 20 26 8 M6 x 18 15 M8 369 33561 111 0.2
B401024 24 50 17 20 26 9 M6 x 18 15 M8 453 37756 118 0.2
B401025 25 50 17 20 26 9 M6 x 18 15 M8 472 37756 118 0.2
B401028 28 55 17 20 26 10 M6 x 18 15 M8 587 41952 119 0.3
B401030 30 55 17 20 26 10 M6 x 18 15 M8 629 41952 119 0.3
B401032 32 60 17 20 26 12 M6 x 18 15 M8 806 50342 131 0.3
B401035 35 60 17 20 26 12 M6 x 18 15 M8 881 50342 131 0.3
B401038 38 65 17 20 26 14 M6 x 18 15 M8 1116 58732 141 0.3
B401040 40 65 17 20 26 14 M6 x 18 15 M8 1175 58732 141 0.3
B401042 42 75 20 24 32 12 M8 x 22 35 M10 1892 90071 159 0.6
B401045 45 75 20 24 32 12 M8 x 22 35 M10 2027 90071 159 0.5
T401048 48 80 20 24 32 12 M8 x 22 35 M10 2162 90071 149 0.6
B401050 50 80 20 24 32 12 M8 x 22 35 M10 2252 90071 149 0.6
B401055 55 85 20 24 32 14 M8 x 22 35 M10 2889 105083 164 0.6
B401060 60 90 20 24 32 14 M8 x 22 35 M10 3152 105083 155 0.7
B401065 65 95 20 24 32 16 M8 x 22 35 M10 3903 120095 168 0.7
B401070 70 110 24 28 38 14 M10 x 25 69 M12 5880 167988 169 1.2
B401075 75 115 24 28 38 14 M10 x 25 69 M12 6300 167988 161 1.3
B401080 80 120 24 28 38 14 M10 x 25 69 M12 6720 167988 155 1.4
T401085 85 125 24 28 38 16 M10 x 25 69 M12 8158 191986 170 1.4
B401090 90 130 24 28 38 16 M10 x 25 69 M12 8639 191986 163 1.5
B401095 95 135 24 28 38 18 M10 x 25 69 M12 10259 215984 177 1.6
B401100 100 145 26 33 45 14 M12 x 30 123 M14 12800 255998 180 2
B401110 110 155 26 33 45 14 M12 x 30 123 M14 14081 255998 169 2
B401120 120 165 26 33 45 16 M12 x 30 123 M14 17553 292569 181 3
B401130 130 180 34 38 50 20 M12 x 35 123 M14 23771 365712 159 4
B401140 140 190 34 38 50 22 M12 x 35 123 M14 28161 402283 165 4
POWER TRANSMISSION
T401150 150 200 34 38 50 24 M12 x 35 123 M14 32917 438854 171 4
B401160 160 210 34 38 50 26 M12 x 35 123 M14 38033 475425 177 4
B401170 170 225 38 44 58 22 M14 x 40 187 M16 44752 526487 163 6
B401180 180 235 38 44 58 24 M14 x 40 187 M16 51694 574350 171 6
B401190 190 250 46 52 66 28 M14 x 45 187 M16 63654 670075 155 8
B401200 200 260 46 52 66 30 M14 x 45 187 M16 71794 717937 159 9
B401220 220 285 50 56 72 26 M16 x 50 290 M20 93540 850401 158 11
B401240 240 305 50 56 72 30 M16 x 50 290 M20 117750 981232 171 12
B401260 260 325 50 56 72 34 M16 x 50 290 M20 144565 1112063 182 13
T401280 280 355 60 66 84 32 M18 x 60 397 M22 178059 1271808 158 19
T401300 300 375 60 66 84 36 M18 x 60 397 M22 214617 1430784 169 21
T401320 320 405 72 78 98 36 M20 x 70 569 M24 295337 1845919 168 29
T401340 340 425 72 78 98 36 M20 x 70 569 M24 313810 1845919 160 31
T401360 360 455 84 90 112 36 M22 x 80 766 M27 410431 2280208 158 43
T401380 380 475 84 90 112 36 M22 x 80 766 M27 433250 2280208 152 45
T401400 400 495 84 90 112 36 M22 x 80 766 M27 456041 2280208 145 47
T401420 420 515 84 90 112 40 M22 x 80 766 M27 532035 2533564 155 49
T401440 440 545 96 102 126 40 M24 x 90 983 M30 651795 2962675 150 65
T401460 460 565 96 102 126 40 M24 x 90 983 M30 681406 2962675 145 67
T401480 480 585 96 102 126 42 M24 x 90 983 M30 746608 3110809 147 71
T401500 500 605 96 102 126 44 M24 x 90 983 M30 814734 3258942 149 72
B400 — Pilot Bushings

B-LOC pilot bushings: for series B400 Recommended pre-centering
Keyless Bushings to provide pre-centering length in installations without
in applications with either straight through pilot bushings. Provide a
hub bores or narrow hubs. Pilot bushings minimum .001" clearance
are supplied in sets consisting of three (hub concentricity depends
(3) bushings and three (3) longer screws on fit clearance).
(replacing plated locking screws). For more
information refer to www.fennerdrives.com
or contact Applications Engineering at
AE@fennerdrives.com.
B-LOC ®
B112
L1
L
Locking screws transfer
Inch to integrated push-off

holes for disassembly. TOLERANCE (TL)

Metric socket head .003" for bores up to 12.008"
locking screws d D
ISO 4762 grade 12.9 .005" for bores over 25.000"
(See Ma for install
torque). d = shaft diameter machined to d +0/-TL.
B112 — Heavy Duty — Inch

Ma Mt Th Ph

Part d D L L1 Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) Qty Size (ft lb) (ft lb) (lbs) (psi) (lb)
B122100 1 2.165 1.260 1.575 6 M6 x 35 12 600 14390 18656 1.0
T122102 1 1/8 2.165 1.260 1.575 6 M6 x 35 12 675 14390 18656 1.0
B122103 1 3/16 2.165 1.260 1.575 6 M6 x 35 12 712 14390 18656 0.9
B122104 1 1/4 2.362 1.732 2.126 7 M6 x 45 12 874 16788 14083 1.5
B122106 1 3/8 2.362 1.732 2.126 7 M6 x 45 12 962 16788 14083 1.4
B122107 1 7/16 2.362 1.732 2.126 7 M6 x 45 12 1006 16788 14083 1.3
B122108 1 1/2 2.953 1.732 2.126 7 M8 x 50 30 2011 32182 21598 2.4
B122110 1 5/8 2.953 1.732 2.126 7 M8 x 50 30 2179 32182 21598 2.3
T122111 1 11/16 2.953 1.732 2.126 7 M8 x 50 30 2263 32182 21598 2.3
B122112 1 3/4 2.953 1.732 2.126 7 M8 x 50 30 2347 32182 21598 2.1
B122114 1 7/8 3.150 2.205 2.598 8 M8 x 55 30 2873 36779 17881 2.9
B122115 1 15/16 3.150 2.205 2.598 8 M8 x 55 30 2969 36779 17881 2.8
B122200 2 3.150 2.205 2.598 8 M8 x 55 30 3065 36779 17881 2.6
B122202 2 1/8 3.346 2.205 2.598 9 M8 x 55 30 3664 41377 18933 2.9
B122203 2 3/16 3.346 2.205 2.598 9 M8 x 55 30 3771 41377 18933 2.8
B122204 2 1/4 3.543 2.205 2.598 10 M8 x 55 30 4310 45974 19868 3.3
B122206 2 3/8 3.543 2.205 2.598 10 M8 x 55 30 4550 45974 19868 3.1
B122207 2 7/16 3.740 2.205 2.598 10 M8 x 55 30 4669 45974 18822 3.6
B122208 2 1/2 3.740 2.205 2.598 10 M8 x 55 30 4789 45974 18822 3.4
B122209 2 9/16 3.740 2.205 2.598 10 M8 x 55 30 4909 45974 18822 3.3
B122210 2 5/8 4.331 2.756 3.150 10 M10 x 60 60 8155 74561 20714 7
T122211 2 11/16 4.331 2.756 3.150 10 M10 x 60 60 8349 74561 20714 7
B122212 2 3/4 4.331 2.756 3.150 10 M10 x 60 60 8543 74561 20714 6
B122214 2 7/8 4.331 2.756 3.150 10 M10 x 60 60 8932 74561 20714 6
POWER TRANSMISSION
B122215 2 15/16 4.724 2.756 3.150 11 M10 x 60 60 10039 82017 20887 8

B122300 3 4.724 2.756 3.150 11 M10 x 60 60 10252 82017 20887 7
T122302 3 1/8 4.724 2.756 3.150 11 M10 x 60 60 10679 82017 20887 7
B122304 3 1/4 4.724 2.756 3.150 11 M10 x 60 60 11107 82017 20887 7
B122306 3 3/8 5.118 2.756 3.150 12 M10 x 60 60 12582 89474 21033 8
B122307 3 7/16 5.118 2.756 3.150 12 M10 x 60 60 12815 89474 21033 8
B122308 3 1/2 5.118 2.756 3.150 12 M10 x 60 60 13048 89474 21033 8
T122310 3 5/8 5.118 2.756 3.150 12 M10 x 60 60 13514 89474 21033 7
B122312 3 3/4 5.709 3.543 4.016 11 M12 x 80 105 19172 122699 20688 13
B122314 3 7/8 5.709 3.543 4.016 11 M12 x 80 105 19811 122699 20688 12
T122315 3 15/16 5.709 3.543 4.016 11 M12 x 80 105 20130 122699 20688 13
B122400 4 5.709 3.543 4.016 11 M12 x 80 105 20450 122699 20688 12
T122404 4 1/4 6.102 3.543 4.016 12 M12 x 80 105 23703 133853 21112 14
T122406 4 3/8 6.102 3.543 4.016 12 M12 x 80 105 24400 133853 21112 13
B122407 4 7/16 6.496 3.543 4.016 14 M12 x 80 105 28874 156162 23138 16
B122408 4 1/2 6.496 3.543 4.016 14 M12 x 80 105 29280 156162 23138 16
T122412 4 3/4 6.496 3.543 4.016 14 M12 x 80 105 30907 156162 23138 14
B122415 4 15/16 7.087 4.094 4.567 12 M14 x 90 166 37477 182167 20618 21
B122500 5 7.087 4.094 4.567 12 M14 x 90 166 37952 182167 20618 21
B122504 5 1/4 7.480 4.094 4.567 14 M14 x 90 166 46491 212528 22789 24
B122507 5 7/16 7.480 4.094 4.567 14 M14 x 90 166 48151 212528 22789 22
T122508 5 1/2 7.480 4.094 4.567 14 M14 x 90 166 48704 212528 22789 21
T122512 5 3/4 7.874 4.094 4.567 15 M14 x 90 166 54555 227709 23196 24
B122515 5 15/16 7.874 4.094 4.567 15 M14 x 90 166 56334 227709 23196 22
B122600 6 8.268 4.094 4.567 16 M14 x 90 166 60722 242890 23564 26
T122607 6 7/16 8.858 5.276 5.866 14 M16 x 110 257 77782 289982 20051 40
T122608 6 1/2 8.858 5.276 5.866 14 M16 x 110 257 78537 289982 20051 39
B122615 6 15/16 9.252 5.276 5.866 15 M16 x 110 257 89810 310695 20569 40
B122700 7 9.252 5.276 5.866 15 M16 x 110 257 90619 310695 20569 38
T122704 7 1/4 9.843 5.276 5.866 16 M16 x 110 257 100113 331408 20624 47
T122707 7 7/16 9.843 5.276 5.866 16 M16 x 110 257 102702 331408 20624 44
T122708 7 1/2 9.843 5.276 5.866 16 M16 x 110 257 103565 331408 20624 43
T122712 7 3/4 10.236 5.276 5.866 16 M16 x 110 257 107017 331408 19830 48
T122715 7 15/16 10.236 5.276 5.866 16 M16 x 110 257 109606 331408 19830 45
T122800 8 10.236 5.276 5.866 16 M16 x 110 257 110469 331408 19830 44
B-LOC ®
B112
TOLERANCE (TL)

Metric
d = shaft diameter machined to d +0/-TL.
B112 — Heavy Duty — Metric

Ma Mt Th Ph

Number (mm) (mm) (mm) (mm) Qty Size (Nm) (Nm) (N) (N/mm2) (kg)
T121024 24 55 32 40 6 M6 x 35 16 755 62949 126 0.4
B121025 25 55 32 40 6 M6 x 35 16 787 62949 126 0.4
T121028 28 55 32 40 6 M6 x 35 16 881 62949 126 0.4
B121030 30 55 32 40 6 M6 x 35 16 944 62949 126 0.4
T121032 32 60 44 54 7 M6 x 45 16 1175 73440 95 0.6
B121035 35 60 44 54 7 M6 x 45 16 1285 73440 95 0.6
T121038 38 75 44 54 7 M8 x 50 41 2742 144304 150 1.0
B121040 40 75 44 54 7 M8 x 50 41 2886 144304 150 1.0
T121042 42 75 44 54 7 M8 x 50 41 3030 144304 150 1.0
B121045 45 75 44 54 7 M8 x 50 41 3247 144304 150 0.9
T121048 48 80 56 66 8 M8 x 55 41 3958 164918 124 1.3
B121050 50 80 56 66 8 M8 x 55 41 4123 164918 124 1.2
B121055 55 85 56 66 9 M8 x 55 41 5102 185533 132 1.3
B121060 60 90 56 66 10 M8 x 55 41 6184 206148 138 1.4
B121065 65 95 56 66 10 M8 x 55 41 6700 206148 131 1.5
B121070 70 110 70 80 10 M10 x 60 81 11559 330251 142 3
T121075 75 115 70 80 10 M10 x 60 81 12384 330251 136 3
B121080 80 120 70 80 11 M10 x 60 81 14531 363276 143 3
T121085 85 125 70 80 11 M10 x 60 81 15439 363276 138 3
B121090 90 130 70 80 12 M10 x 60 81 17834 396302 144 4
T121095 95 135 70 80 12 M10 x 60 81 18824 396302 139 4
B121100 100 145 90 102 11 M12 x 80 142 27222 544433 142 6
B121110 110 155 90 102 12 M12 x 80 142 32666 593927 145 6
B121120 120 165 90 102 14 M12 x 80 142 41575 692914 159 7
POWER TRANSMISSION
B121130 130 180 104 116 12 M14 x 90 225 52658 810116 142 9
B121140 140 190 104 116 14 M14 x 90 225 66159 945135 157 10
B121150 150 200 104 116 15 M14 x 90 225 75948 1012645 160 10
B121160 160 210 104 116 16 M14 x 90 225 86412 1080154 162 11
T121170 170 225 134 149 14 M16 x 110 348 109506 1288307 138 16
T121180 180 235 134 149 15 M16 x 110 348 124230 1380329 142 17
T121190 190 250 134 149 16 M16 x 110 348 139873 1472351 142 20
B121200 200 260 134 149 16 M16 x 110 348 147235 1472351 137 21
B121220 220 285 134 150 18 M16 x 110 348 182203 1656395 140 25
B121240 240 305 134 150 20 M16 x 110 348 220853 1840439 146 27
T121260 260 325 134 150 21 M16 x 110 348 251220 1932460 143 29
T121280 280 355 165 177 18 M20 x 130 678 360984 2578456 146 43
T121300 300 375 165 177 20 M20 x 130 678 429743 2864951 154 47
T121320 320 405 165 177 21 M20 x 130 678 481312 3008198 149 56
T121340 340 425 165 177 22 M20 x 130 678 535746 3151446 149 60
T121360 360 455 190 203 21 M22 x 150 915 670526 3725144 143 80
T121380 380 475 190 203 22 M22 x 150 915 741481 3902532 143 85
T121400 400 495 190 203 24 M22 x 150 915 851462 4257308 150 88
T121420 420 515 190 203 24 M22 x 150 915 894035 4257308 144 92
T121440 440 535 190 203 24 M22 x 150 915 936608 4257308 139 96
T121460 460 555 190 203 24 M22 x 150 915 979181 4257308 134 101
T121480 480 575 190 203 28 M22 x 150 915 1192046 4966859 151 103
T121500 500 595 190 203 28 M22 x 150 915 1241715 4966859 146 108
T121520 520 615 190 203 30 M22 x 150 915 1383625 5321634 151 111
T121540 540 635 190 203 30 M22 x 150 915 1436841 5321634 146 114
T121560 560 655 190 203 32 M22 x 150 915 1589395 5676410 151 119
T121580 580 675 190 203 32 M22 x 150 915 1646159 5676410 147 123
T121600 600 695 190 203 33 M22 x 150 915 1756139 5853798 147 128
L1
L TOLERANCE (TL)
B-LOC ® Locking screws transfer to integrated
B115
push-off holes for disassembly. Bore diameter machined to D -0/+TL
Metric socket head locking screws .005" for bores over 25.000"
Inch
ISO 4762 grade 12.9 d D
(See Ma for install torque). TL = .05mm for bores up to 120mm
Metric Screw head height = screw diameter (mm)
.10mm
.13mm
for
for
bores
bores
up to 635mm
over 635mm
d = shaft diameter machined to d +0/-TL

B115 — Medium Duty — Inch
Ma Mt Th Ph

Number (inch) (inch) (inch) (inch) Qty Size (ft lb) (ft lb) (lbs) (psi) (lb)
B152212 2 3/4 4.331 1.969 2.441 8 M10 x 50 60 5261 45913 17858 5
B152215 2 15/16 4.528 1.969 2.441 8 M10 x 50 60 5620 45913 17079 5
T152307 3 7/16 5.118 1.969 2.441 11 M10 x 50 60 9042 63131 20777 7
B152308 3 1/2 5.118 1.969 2.441 11 M10 x 50 60 9207 63131 20777 6
B152315 3 15/16 5.709 2.362 2.835 10 M12 x 60 105 14086 85858 21111 9
B152407 4 7/16 6.496 2.362 2.835 11 M12 x 60 105 17462 94444 20408 12
T152408 4 1/2 6.496 2.362 2.835 11 M12 x 60 105 17708 94444 20408 11
T152415 4 15/16 7.087 2.559 3.189 14 M12 x 70 105 24729 120202 21162 15
T152500 5 7.087 2.559 3.189 14 M12 x 70 105 25042 120202 21162 15
B152507 5 7/16 7.480 2.559 3.228 15 M12 x 70 105 29178 128787 21482 15
B152515 5 15/16 7.874 2.559 3.228 15 M12 x 70 105 31861 128787 20407 16
T152600 6 8.268 2.559 3.228 16 M12 x 70 105 34343 137373 20731 19
T152607 6 7/16 8.858 3.071 3.661 15 M14 x 80 166 47013 175273 20830 25
B152615 6 15/16 9.252 3.071 3.661 15 M14 x 80 166 50665 175273 19944 25
B152715 7 15/16 10.236 3.465 4.134 18 M14 x 80 166 69561 210328 18216 31
T152800 8 10.236 3.465 4.134 18 M14 x 80 166 70109 210328 18216 32
B115 — Medium Duty — Metric

Ma Mt Th Ph

B151070 70 110 50 62 8 M10 x 50 81 7118 203362 123 2
T151075 75 115 50 62 8 M10 x 50 81 7626 203362 117 2
T151080 80 120 50 62 10 M10 x 50 81 10168 254202 140 3
T151090 90 130 50 62 11 M10 x 50 81 12583 279622 143 3
T151095 95 135 50 62 11 M10 x 50 81 13282 279622 137 4
POWER TRANSMISSION
B151100 100 145 60 72 10 M12 x 60 142 19048 380966 145 4

T151110 110 155 60 72 10 M12 x 60 142 20953 380966 136 4
B151120 120 165 60 72 11 M12 x 60 142 25144 419063 140 5
T151130 130 180 65 81 14 M12 x 70 142 34668 533353 146 6
B151140 140 190 65 82 15 M12 x 70 142 40001 571449 148 7
B151150 150 200 65 82 15 M12 x 70 142 42859 571449 140 7
B151160 160 210 65 82 16 M12 x 70 142 48764 609546 143 8
B151170 170 225 78 93 15 M14 x 80 225 66254 779456 144 11
B151180 180 235 78 93 15 M14 x 80 225 70151 779456 137 11
B151190 190 250 88 105 16 M14 x 80 225 78985 831420 116 14
B151200 200 260 88 105 18 M14 x 80 225 93535 935348 126 15
B151220 220 285 96 111 15 M16 x 90 348 116872 1062472 121 19
B151240 240 305 96 111 20 M16 x 90 348 169995 1416629 150 20
T151260 260 325 96 111 21 M16 x 90 348 193370 1487460 148 22
T151280 280 355 96 111 15 M20 x 90 678 231548 1653915 163 27
T151300 300 375 96 111 15 M20 x 90 678 248087 1653915 154 30
T151320 320 405 124 136 20 M20 x 110 678 352835 2205220 150 44
T151340 340 425 124 136 20 M20 x 110 678 374887 2205220 143 47
T151360 360 455 140 160 20 M22 x 130 915 491542 2730791 133 66
T151380 380 475 140 160 20 M22 x 130 915 518850 2730791 127 69
T151400 400 495 140 160 22 M22 x 130 915 600774 3003871 134 72
T151420 420 515 140 160 24 M22 x 130 915 688159 3276950 141 75
T151440 440 535 140 160 24 M22 x 130 915 720929 3276950 135 78
T151460 460 555 140 160 24 M22 x 130 915 753698 3276950 131 82
T151480 480 575 140 160 25 M22 x 130 915 819237 3413489 131 84
T151500 500 595 140 160 25 M22 x 130 915 853372 3413489 127 88
T151520 520 615 140 160 28 M22 x 130 915 994008 3823108 137 91
T151540 540 635 140 160 28 M22 x 130 915 1032239 3823108 133 94
T151560 560 655 140 160 30 M22 x 130 915 1146932 4096187 138 97
T151580 580 675 140 160 30 M22 x 130 915 1187894 4096187 134 100
T151600 600 695 140 160 30 M22 x 130 915 1228856 4096187 130 103
B-LOC ®
B113
L1
L
Metric
TOLERANCE (TL)

Locking screws transfer to integrated .08mm for bores up to 355mm
push-off holes for disassembly. .09mm for bores up to 615mm
D d
Metric socket head locking screws .13mm for bores over 675mm
ISO 4762 grade 12.9
(See Ma for install torque). d = shaft diameter machined to d +0/-TL
B113 — Extra Heavy Duty — Metric

Ma Mt Th Ph

T131180 180 285 205 231 14 M22 x 180 915 223566 2483935 139 62
T131200 200 305 205 233 16 M22 x 180 915 283878 2838783 149 67
T131220 220 325 205 229 16 M22 x 180 915 312251 2838783 141 73
T131240 240 355 208 240 16 M24 x 180 1180 400322 3335957 147 88
T131260 260 375 208 240 18 M24 x 180 1180 487873 3752951 156 93
T131280 280 405 208 238 20 M24 x 180 1180 583812 4169946 163 110
T131300 300 425 208 240 20 M24 x 180 1180 625491 4169946 153 117
T131320 320 455 250 280 18 M27 x 220 1763 803261 5020549 149 161
T131340 340 475 250 285 20 M27 x 220 1763 948338 5578387 156 170
T131360 360 495 250 283 22 M27 x 220 1763 1104503 6136226 164 177
T131380 380 515 250 280 22 M27 x 220 1763 1165912 6136226 160 186
T131400 400 535 250 280 22 M27 x 220 1763 1227243 6136226 152 192
T131420 420 555 250 285 24 M27 x 220 1763 1405717 6694065 160 202
T131440 440 575 250 285 24 M27 x 220 1763 1472708 6694065 154 210
T131460 460 595 250 285 24 M27 x 220 1763 1539615 6694065 149 220
T131480 480 615 250 285 28 M27 x 220 1763 1874374 7809742 168 227
T131500 500 635 250 280 28 M27 x 220 1763 1952432 7809742 163 233
POWER TRANSMISSION
T131520 520 655 250 285 28 M27 x 220 1763 2030489 7809742 158 244
T131540 540 675 250 280 30 M27 x 220 1763 2259264 8367581 164 251
T131560 560 695 250 280 30 M27 x 220 1763 2342897 8367581 160 260
B-LOC ®
B117
Metric
Metric socket head locking TOLERANCE (TL)

screws
ISO 4762 grade 12.9 Bore diameter machined to D -0/+TL
(See Ma for install torque). TL = .05mm for bores up to 120mm
B117 — High-Bending — Metric

Locking Screws Mt1 Mt2 Mttot Th1 Th2 Thtot Ph1 Ph2
SIZE 1 SIZE 2
Maximum Transmitted Maximum Transmitted
Ma Ma
Install Install Hub Hub Shipping
Part d D D1 L L1 L2 Torque Torque Torque Torque Torque Thrust Thrust Thrust Pressure Pressure Weight
Number (mm) (mm) (mm) (mm) (mm) (mm) Qty. Size (Nm) Qty. Size (Nm) (Nm) (Nm) (Nm) (N) (N) (N) ( N/mm2) ( N/mm2) (kg)
B171180 180 250 256 40 122 92 8 M20 x 70 678 8 M16 x 110 348 51569 33128 84697 572990 368088 941078 152 98 21
B171190 190 270 276 40 122 92 10 M20 x 70 678 10 M16 x 110 348 68043 43710 111753 716238 460110 1176347 176 113 22
B171200 200 270 276 40 122 92 10 M20 x 70 678 10 M16 x 110 348 71624 46011 117635 716238 460110 1176347 176 113 23
B171220 220 290 296 40 122 92 10 M20 x 70 678 10 M16 x 110 348 78786 50612 129398 716238 460110 1176347 164 105 25
B171240 240 310 316 40 122 92 12 M20 x 70 678 12 M16 x 110 348 103138 66256 169394 859485 552132 1411617 184 118 28
B171260 260 330 336 40 122 92 12 M20 x 70 678 12 M16 x 110 348 111733 71777 183510 859485 552132 1411617 173 111 29
B171280 280 365 371 45 144 108 10 M24 x 80 1180 10 M20 x 130 678 145918 100273 246192 1042274 716238 1758512 168 116 45
B171300 300 385 391 45 144 108 10 M24 x 80 1180 10 M20 x 130 678 156341 107436 263777 1042274 716238 1758512 160 110 48
B171340 340 425 431 45 144 108 14 M24 x 80 1180 14 M20 x 130 678 248061 170465 418526 1459184 1002733 2461917 202 139 54
B171380 380 465 471 45 144 108 16 M24 x 80 1180 16 M20 x 130 678 316851 217736 534588 1667639 1145980 2813619 211 145 58
B171400 400 485 491 45 144 108 16 M24 x 80 1180 16 M20 x 130 678 333528 229196 562724 1667639 1145980 2813619 203 139 62
B171420 420 505 511 45 144 108 16 M24 x 80 1180 16 M20 x 130 678 350204 240656 590860 1667639 1145980 2813619 195 134 65
B171440 440 525 531 59 178 147 16 M24 x 100 1180 16 M20 x 150 678 366881 252116 618996 1667639 1145980 2813619 143 98 82
B171460 460 545 551 59 178 147 16 M24 x 100 1180 16 M20 x 150 678 383557 263575 647132 1667639 1145980 2813619 138 95 85
B171480 480 565 571 59 178 147 16 M24 x 100 1180 16 M20 x 150 678 400233 275035 675269 1667639 1145980 2813619 133 91 90
POWER TRANSMISSION
B171500 500 585 591 59 178 147 18 M24 x 100 1180 18 M20 x 150 678 469023 322307 791330 1876094 1289228 3165322 144 99 93
B171520 520 605 611 59 178 147 18 M24 x 100 1180 18 M20 x 150 678 487784 335199 822984 1876094 1289228 3165322 139 96 97
B171540 540 625 631 59 178 147 18 M24 x 100 1180 18 M20 x 150 678 506545 348092 854637 1876094 1289228 3165322 135 93 100
B171560 560 645 651 59 178 147 18 M24 x 100 1180 18 M20 x 150 678 525306 360984 886290 1876094 1289228 3165322 131 90 103
B171580 580 665 671 59 178 147 20 M24 x 100 1180 20 M20 x 150 678 604519 415418 1019937 2084549 1432475 3517024 141 97 107
B171600 600 685 691 59 178 147 20 M24 x 100 1180 20 M20 x 150 678 625365 429743 1055107 2084549 1432475 3517024 137 94 110
Additional sizes available upon request.
B117 Units, d ≤ 420mm B117 Units, d ≥ 440mm
Fenner Drives Keyless Locking Devices

From precision medical devices to powerful turbines,
Fenner Drives Keyless Locking Devices are perfectly
suited for use in any industry where there is a need
to mount a component to a shaft. Every day, our
customers find unique uses for the engineering
elegance of our keyless locking devices. The
application examples shown are just a small sampling
of the many thousands of possible applications
for Fenner Drives Keyless Locking Devices. So ask Trantorque Mini provides a solution for mounting components in
tight spaces on very small shafts, such as for this timing pulley
yourself, “What do I need to mount today?” on a linear slide.
Trantorque OE ensures zero backlash on a rack and pinion drive.
POWER TRANSMISSION
B-LOC Shrink Discs and WK Series Rigid Couplings facilitate torque-arm mounting
of hydraulic drives directly onto the driven shaft, eliminating more expensive and less
reliable flexible coupling arrangements.
Trantorque GT is perfect for high speed, low torque applications where balance is critical,
as on this fan hub.
B-LOC Compression Hubs mounting transfer wheels to the shaft of a Heavy Duty B112 mounts rotor on an aggregate impact crusher.
12-strand rollover conveyor.
ENGINEERING DATA – KEYLESS LOCKING DEVICES
SURFACE FINISH HOLLOW SHAFTS

Recommended surface finish for shafts and hub bores to be used Hollow shafts with bores exceeding 35% of outside diameter
with Fenner Drives Keyless Bushings is between 32 and 125 usually require a reduction of contact pressures in order to avoid
micro-inch (0.8 and 3.2 micro-meter) RMS. A smoother finish permanent shaft deformation. Special considerations arise when
— such as that found on components supplied TG& P (turned, installing Fenner Drives Keyless Bushings onto hollow shafts.
ground and polished) — is NOT recommended and can result Please consult with a Fenner Drives Applications Engineer for
in a failure of the connection. Note that surface finishes below a trouble free hollow shaft connection.
32 micro-inch (0.8 micro-meter) RMS can be roughened using
longitudinal abrasion with a bastard file, emery paper or similar LUBRICANTS
to achieve a surface finish within the recommended range. Trantorque® and B-LOC Keyless Locking Devices are supplied
with an oil specific to the product line. The listed performance
CONCENTRICITY data requires the use of these lubricants to provide the necessary
Fenner Drives Keyless Bushings are precision machined to coefficient of friction to the sliding surfaces. Some products have
maximize concentricity and minimize runout. The final strategically applied grease or oil (in some cases food grade) to
installed concentricity of mounted components depends on achieve performance.
several variables, including the components themselves and the
installation technique employed. Special attention to proper MATERIALS
installation will be required for B-LOC® B400 series units. Trantorque and B-LOC Keyless Locking Devices are made from
Overall, however, concentricity is typically excellent for the carbon and heat treated alloy steels. B-LOC Keyless Bushings
majority of Fenner Drives Keyless Bushings. are manufactured from heat treated carbon and alloy steels. For
applications in corrosive environments, corrosion resistance can
POLYMERIC DRIVE COMPONENTS be improved through sealing with grease or silicone, the use of
Fenner Drives Keyless Locking Devices are only recommended protective cover plates, application of industry standard plating
for use with drive components constructed of polymers if a materials (e.g., nickel, thin dense chrome, etc.) or by specifying
metal sleeve of sufficient size and strength is incorporated the product in stainless steel or other corrosion resistant
into the bore of the mounted component. For design and materials. Please consult with a Fenner Drives Applications
manufacturing support of a suitable sleeve consult with a Engineer for more details.
Fenner Drives Applications Engineer.
TORQUE
TEMPERATURE INFLUENCE T = peak drive torque = nominal torque multiplied by a variable
Similar to conventional shrink or press fits, connections using safety factor to account for stall or start-up conditions, mass
Fenner Drives Keyless Bushings are generally not affected by accelerations, impact loads, etc. Nominal drive torque can be
temperature changes as long as the shaft, hub and bushing calculated as follows:
are made of the same material and temperatures are applied
Mtnom (ft lb) = 5252 × HP
uniformly to each. For situations where one or more of the
rpm
components are made of a material with a different coefficient
of thermal expansion or where thermal gradients/cycles
Mtnom (Nm) = 9550 × kW
are present, fit pressures can be impacted. Please consult a
POWER TRANSMISSION
rpm
Fenner Drives Applications Engineer.
Consult with a Fenner Drives Applications Engineer in cases
MOUNTING BEARINGS where “T” is uncertain.
WITH FENNER DRIVES KEYLESS BUSHINGS Mt = The rated torque capacity of one Fenner Drives Keyless
Mounting bearings with a Fenner Drives Keyless Bushing is
Bushing installed according to our instructions. Published
not recommended. The expansion forces generated will distort
torque capacities are calculated without using a safety factor and
the bearing’s inner race, causing premature failure.
should be considered as the point where a connection could
INSTALLING MULTIPLE FENNER DRIVES slip if a higher torque is applied. Therefore, always select a unit
where Mt ≥ T.
KEYLESS BUSHINGS IN SERIES
Additional torque capacity can be achieved by arranging two MODIFIED INSTALLATION TORQUE
or more B-LOC Keyless Bushings in series. In these situations, The installation torque shown in the data tables is the
where access to locking screws is available from one side only, maximum installation torque recommended for the product.
the total torque capacity of the connection is not a linear Torque capacity and contact pressures are a linear function of
function of the number of units applied. For applications installation torque (Ma) and can be adjusted if necessary by
involving B-LOC Keyless Bushings in series, please consult changing Ma within the following limits:
with a Fenner Drives Applications Engineer.
Series Ma
ANAEROBIC ADHESIVES (THREADLOCKER) Trantorque up to 50% lower

Do not use anaerobic adhesives such as Loctite®, Permatex® or B-LOC B103/B106/B109 up to 20% lower
similar compounds with Fenner Drives Keyless Bushings. Doing B-LOC B400 up to 20% higher or
so results in unknown contact pressures and capacities. Further, up to 20% lower
disassembly may be compromised when such compounds are B-LOC B800 up to 20% lower
applied to the keyless bushing, the shaft and/or the hub bore. B-LOC B112/B113 up to 40% lower
Proper installation assures sufficient pre-load so that threads are B-LOC B115 up to 30% lower
self-locking, even in cases where the keyless bushing is subjected B-LOC B117 up to 20% lower
to extreme vibratory conditions.
THRUST FENNER DRIVES KEYLESS BUSHINGS

Th = transmissible thrust, determined by using the following WITH SHAFT ADAPTOR SLEEVES
equation: When an existing shaft diameter does not fit the bore of a
Th = 2 × Mt standard Fenner Drives Keyless Bushing, we recommend
d using an adapter sleeve that can be sized to allow for the use
where: d = shaft diameter of a standard unit and the existing shaft. The maximum wall
Mt = rated torque capacity thickness of the adapter sleeve should be approximately
10% of the existing shaft diameter.
TORQUE AND THRUST COMBINED Note that in order to maximize the torque
Simultaneous transmission of torque and thrust requires
capacity of a sleeved keyless bushing connection,
calculating a resultant torque:
the shaft/sleeve bore interface must be free
(
T2 + F × d
) of any lubricant. This makes the sleeve
2
Mtres =
2 outside diameter/keyless bushing bore
the point of lowest torque capacity
where: T = peak drive torque (provided the sleeve outside diameter is
F = peak thrust load less than 1.25 times the shaft diameter)
d = shaft diameter and allows for full use of the larger
Select a unit where Mt ≥ Mtres keyless bushing’s higher torque
capacity.
BENDING MOMENTS Notes:
Bending moments are a crucial sizing factor in applications 1. Sleeve ID = ds -0/+.001" (.025mm)
where a radial load from chain pull, the weight of components, where ds = shaft diameter
etc. acts significantly outside the keyless bushing centerline.
2. Sleeve OD = d +0/-TL for keyless bushing to be used
Typical applications include rolls or conveyor pulleys where
shaft deflection due to radial loads results in a bending moment 3. Install dry (cleaned with non-petroleum-based solvent) at
between shaft and end disc. Generally, bending moments change shaft/sleeve bore interface for coefficient of friction µ = 0.15
from a positive to a negative value during each rotation and are 4. Torque capacity at sleeve OD = Mt for keyless bushing
designated as rotating or reversing bending moments. to be used
Fenner Drives Keyless Bushings are well suited to transmit 5. Torque capacity on shaft = Mt × ds × 1.25
d
rotating/reversing bending moments. Compiled using relevant 6. Sleeve to be manufactured with one lengthwise slit
data gleaned from numerous successful heavy-duty applications (after machining) and from material equal to or better
in conveyor pulleys as well as pertinent investigations by than shaft material
independent institutions, the following bending moment 7. Sleeve can be installed over existing keyway; position slit
capacities apply: approximately opposite keyway
Bending Moment
Series
Capacity (Mb) RADIAL LOADS
POWER TRANSMISSION
Trantorque 0.28 × Mt Radial loads are generated when force is applied perpendicular
B-LOC B103/B106/B109 0.28 × Mt to the centerline of the shaft and are frequently associated with
B-LOC B400 0.22 × Mt pin or axle connections (see illustration below). Fenner Drives
B-LOC B800 0.28 × Mt Keyless Bushings are well suited to provide tight, backlash-free
B-LOC B115 0.32 × Mt connections for this type of application, as explained below.
B-LOC B112/B113 0.35 × Mt
Frad = radial load capacity = d × L × Ps
B-LOC B117 0.65 × Mt
where: d = shaft diameter
where: Mt = rated torque capacity (from specification tables)
D = hub bore
Consult with a Fenner Drives Applications Engineer on L = contact length
applications where the actual bending moment exceeds Ph = hub pressure
these recommended limits. Ps = shaft contact pressure = Ph × D
d
TORQUE AND BENDING COMBINED
Simultaneous transmission of torque and bending requires Typical pressure distribution in backlash-free pin connections
calculating a resultant torque: d = pin diameter
Mtb = T2 + (2 × Mb)2 Explanations:

pmin. = p - pL p = contact pressure provided
where: T = peak drive torque ≥0 by keyless bushing
pL = contact pressure on projected
Mb = bending moment contact area
Always select a unit where Mt ≥ Mtb and Mb is within the limits

Load load
appearing under Bending Moment Capacity above. =
d x contact length
pmax. = p + pL
Y.P. = yield point of pin material
≤ Y.P.
HUB SIZING Trantorque®, B-LOC ® B109, B103, B-LOC ® B112, B113, & B115
Fenner Drives Keyless Bushings transmit torque and B106, B117, B400 & B800
other loads by means of mechanical interference generated
1.5 1.25
by pressure exerted on both the shaft and mounted
component hub. Therefore, consideration must be
given to the amount of hub material (wall thickness)
required to prevent permanent expansion (i.e., yielding).
The following information is provided to assist you
in determining the required hub diameter DN for any
keyless bushing application.
Following standard industry practice, the criterion
σti < Sy is used to determine DN as follows:
1.5 2.0 1.25 1.5
DN = D Sy + (Ph × C)
Sy - (Ph × C)
where: D = hub bore diameter (from product specifications)

Ph = contact pressure applied to hub bore
(from product specifications)
Sy = yield strength of hub material and
2.0 1.5
C = Stress Reduction Factor which assumes the value
of 1.0, 0.8 or 0.6 depending upon the relationship of
your actual hub width Hw to the contact length L of
the keyless bushing selected. Use the illustrations on
the right to determine C for your application.
Table 1
Note: Keyless Locking Device outer ring axial position must be roughly centered in the hub.
THICK WALLED CYLINDER

SUBJECTED TO INTERNAL PRESSURE TANGENTIAL RADIAL EXPANSION/
STRESSES “st“ STRESSES “sr“ CONTRACTION
POWER TRANSMISSION
THICK WALLED CYLINDER

SUBJECTED TO EXTERNAL PRESSURE TANGENTIAL RADIAL EXPANSION/
STRESSES “st“ STRESSES “sr“ CONTRACTION
COMBINED HUB STRESSES
KEY i = inside of cylinder P = pressure

o = outside of cylinder τ = torsional hub stress
ν = Poisson’s ratio
for steel: 0.29
E = modulus of elasticity Q
for steel: 3.0 × 10 7 psi (2.07 × 10 5 N/mm2)
Example for calculating minimum hub diameter:

Trantorque OE 1", assuming a 2" wide hub made of 55,000 psi yield strength material.
Locate part number 6410100 on page 50.
Record the values for outside diameter D, contact length L, and hub pressure Ph and
return to this page.
D = 1½"
L = 1"
Ph = 18,746 psi
Determine the Stress Reduction Factor C, by first calculating the ratio of hub width to
contact length (Hw /L). Next, locate the appropriate product line in Table 1 on previous
page to determine C.
Hw
NOTE: Contact Fenner Drives Applications Engineering if <1
L
Hw
=2 C = 0.6
L
The last item required is the yield strength of your mounted component, Sy . This value
should be obtainable from the manufacturer of the mounted component or raw material
supplier. For this example, the yield strength is 55,000 psi.
Substitute the values obtained above into the minimum hub diameter equation, DN to
obtain your result.
DN = 1.5 55,000 + (18,746 × 0.6)

= 1.846"
55,000 - (18,746 × 0.6)
Worksheet for calculating minimum hub diameter:
Above Example Your Example
Series Trantorque OE ____________________________________
Part Number 6410400 ____________________________________
Size 1" ____________________________________
POWER TRANSMISSION
Outside diameter, D 1.5 ____________________________________
Contact Length, L 1 ____________________________________
Hub Pressure, Ph 18,746 ____________________________________
Hub Size, Hw 2" ____________________________________
Yield Strength, Sy 55,000 psi ____________________________________
Hw 2 Hw
= =2 C = 0.6 = = ______ C = ______
L 1 L
C is obtained from Table 1 on previous
page for Trantorque where Hw
≥2
L
DN = D Sy + (Ph × C) DN = D Sy + (Ph × C)
Sy - (Ph × C) Sy - (Ph × C)
= 1.5 55,000 + (18,746 × 0.6) = ______ _________ + ( __________ × ___________) = ________

= 1.846"
55,000 - (18,746 × 0.6)
_________ - ( __________ × ___________)
B-LOC ®
BCH Metric socket head
20
locking screws
ISO 4762 grade 12.9
(See Ma for install
torque).
Inch
Locking screws transfer to
integrated push-off holes
for disassembly. TOLERANCE (TL)
Recommended bore diameter d1 +.001" / +.003"

Screw head height = screw
TL = .002" for shafts up to 3"
diameter (mm)
Shaft diameter machined to d +0/-TL
Parallelism machined to X +/- .005"
BCH20 – Light Duty – Inch

Mounted Component Thickness (X) Ma Mt Th Ps
Locking Maximum
Screws Range 1 Range 2 Transmitted
Screw Screw Install Shaft Ship
Base Part d D H1 A d1 Length 1 Length 2 Torque Torque Thrust Pressure Weight
Number (inch) (inch) (inch) (inch) (inch) Qty Size X (inch) (mm) X (inch) (mm) (ft lb) (ft lb) (lbs) (ksi) (lb)
BCH202008 1/2 1.496 0.305 0.925 1.280 4 M4 0.098 – 0.161 16 0.161 – 0.319 20 3.5 48 2320 24.7 0.2
BCH202010 5/8 1.496 0.305 0.925 1.280 4 M4 0.098 – 0.161 16 0.161 – 0.319 20 3.5 60 2320 19.7 0.2
BCH202012 3/4 1.732 0.305 1.122 1.535 4 M4 0.098 – 0.161 16 0.161 – 0.319 20 3.5 72 2320 16.5 0.4
BCH202014 7/8 1.969 0.384 1.339 1.732 4 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 84 2320 11.3 0.4
BCH202015 15/16 1.969 0.384 1.339 1.732 4 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 90 2320 10.6 0.4
BCH202100 1 1.969 0.384 1.339 1.732 4 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 97 2320 9.9 0.4
BCH202102 1 1/8 2.165 0.384 1.535 1.969 5 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 136 2990 11.3 0.7
BCH202103 1 3/16 2.165 0.384 1.535 1.969 5 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 136 2990 10.7 0.7
BCH202104 1 1/4 2.362 0.384 1.732 2.126 6 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 180 3570 12.2 0.7
BCH202106 1 3/8 2.362 0.384 1.732 2.126 6 M4 0.098 – 0.240 20 0.240 – 0.437 25 3.5 180 3570 11.2 0.7
BCH202107 1 7/16 2.756 0.482 2.008 2.520 4 M5 0.098 – 0.276 25 0.276 – 0.472 30 7 237 4020 10.0 1.1
BCH202108 1 1/2 2.756 0.482 2.008 2.520 4 M5 0.098 – 0.276 25 0.276 – 0.472 30 7 237 4020 9.6 1.1
BCH202110 1 5/8 2.992 0.482 2.205 2.677 6 M5 0.098 – 0.276 25 0.276 – 0.472 30 7 385 6050 13.2 1.3
BCH202111 1 11/16 2.992 0.482 2.205 2.677 6 M5 0.098 – 0.276 25 0.276 – 0.472 30 7 385 6050 12.8 1.3
BCH202112 1 3/4 2.992 0.482 2.205 2.677 6 M5 0.098 – 0.276 25 0.276 – 0.472 30 7 385 6050 12.3 1.3
BCH202114 1 7/8 3.543 0.561 2.598 3.071 9 M5 0.098 – 0.394 30 0.394 – 0.512 40 7 683 9060 14.8 2.2
BCH202115 1 15/16 3.543 0.561 2.598 3.071 9 M5 0.098 – 0.394 30 0.394 – 0.512 40 7 683 9060 14.4 2.2
BCH202200 2 3.543 0.561 2.598 3.071 9 M5 0.098 – 0.394 30 0.394 – 0.512 40 7 683 9060 13.8 2.2
BCH202202 2 1/8 3.543 0.561 2.598 3.071 9 M5 0.098 – 0.394 30 0.394 – 0.512 40 7 683 9060 13.1 2
POWER TRANSMISSION
BCH202203 2 3/16 3.543 0.561 2.598 3.071 9 M5 0.098 – 0.394 30 0.394 – 0.512 40 7 683 9060 12.6 2
BCH202204 2 1/4 4.134 0.679 3.031 3.622 9 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1066 12190 13.6 3.5
BCH202206 2 3/8 4.134 0.679 3.031 3.622 9 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1066 12190 12.9 3.3
BCH202207 2 7/16 4.134 0.679 3.031 3.622 9 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1066 12190 12.6 3.3
BCH202208 2 1/2 4.134 0.679 3.031 3.622 9 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1066 12190 12.3 3.3
BCH202209 2 9/16 4.134 0.679 3.031 3.622 9 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1066 12190 12.0 3.1
BCH202210 2 5/8 4.724 0.679 3.465 4.016 12 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1617 16250 15.5 4.6
BCH202212 2 3/4 4.724 0.679 3.465 4.016 12 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1617 16250 14.9 4.4
BCH202214 2 7/8 4.724 0.679 3.465 4.016 12 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1617 16250 14.2 4.2
BCH202215 2 15/16 4.724 0.679 3.465 4.016 12 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1617 16250 13.9 4.2
BCH202300 3 4.724 0.679 3.465 4.016 12 M6 0.098 - 0.429 35 0.429 - 0.591 45 12 1617 16250 13.6 4
Part Number Ordering Guide

Base Screw Length Complete Part NOTES
Part Number
+ (based on X)
= Number 1. B-LOC Compression Hubs exert a maximum pressure on the
face of the mounted component of 250 N/mm2 (36 ksi).
BCH202110 025 BCH202110-025 2. B-LOC pilot diameter d1 machined to ISO tolerance h8.
3 digit whole number
Always in mm
25 = 025
B-LOC®
BCH
20
Metric
TOLERANCE (TL)
Recommended bore diameter d1 +.03mm / +.08mm

TL = .05mm for shafts up to 75mm
Parallelism machined to X +/- 0.13mm
BCH20 – Light Duty – Metric

Locking Maximum
Number (mm) (mm) (mm) (mm) (mm) Qty Size X (mm) (mm) X (mm) (mm) (Nm) (Nm) (kN) (N/mm2) (kg)
BCH201012 12 38 7.8 23.5 32.5 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 65 10.8 189 0.1
BCH201014 14 38 7.8 23.5 32.5 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 76 10.8 136 0.1
BCH201015 15 38 7.8 23.5 32.5 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 81 10.8 114 0.2
BCH201018 18 44 7.8 28.5 39 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 97 10.8 78 0.2
BCH201019 19 44 7.8 28.5 39 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 103 10.8 73 0.2
BCH201020 20 44 7.8 28.5 39 4 M4 2.5 – 4.1 16 4.1 – 8.1 20 5 108 10.8 68 0.2
BCH201022 22 50 9.8 34 44 4 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 122 11.2 78 0.3
BCH201024 24 50 9.8 34 44 4 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 134 11.2 74 0.3
BCH201025 25 50 9.8 34 44 4 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 140 11.2 84 0.3
BCH201028 28 55 9.8 39 50 5 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 195 13.9 77 0.3
BCH201030 30 55 9.8 39 50 5 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 195 13.9 69 0.5
BCH201032 32 60 9.8 44 54 6 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 257 16.7 66 0.5
BCH201035 35 60 9.8 44 54 6 M4 2.5 – 6.1 20 6.1 – 11.1 25 5 257 16.7 91 0.6
BCH201038 38 70 12.3 51 64 4 M5 2.5 – 7 25 7 – 12 30 10 321 17.9 88 0.6
BCH201040 40 70 12.3 51 64 4 M5 2.5 – 7 25 7 – 12 30 10 321 17.9 85 0.6
BCH201042 42 76 12.3 56 68 6 M5 2.5 – 7 25 7 – 12 30 10 522 26.9 102 1
BCH201045 45 76 12.3 56 68 6 M5 2.5 – 7 25 7 – 12 30 10 522 26.9 99 1
BCH201048 48 90 14.3 66 78 9 M5 2.5 – 10 30 10 – 13 40 10 926 40.3 95 1
BCH201050 50 90 14.3 66 78 9 M5 2.5 – 10 30 10 – 13 40 10 926 40.3 90 0.9
POWER TRANSMISSION
BCH201055 55 90 14.3 66 78 9 M5 2.5 – 10 30 10 – 13 40 10 926 40.3 87 0.9
BCH201060 60 105 17.3 77 92 9 M6 2.5 – 10.9 35 10.9 – 15 45 16 1445 54.2 94 1.6
BCH201065 65 105 17.3 77 92 9 M6 2.5 – 10.9 35 10.9 – 15 45 16 1445 54.2 89 1.5
BCH201070 70 120 17.3 88 102 12 M6 2.5 – 10.9 35 10.9 – 15 45 16 2192 72.3 87 1.5
BCH201075 75 120 17.3 88 102 12 M6 2.5 – 10.9 35 10.9 – 15 45 16 2192 72.3 85 1.5
Contact our Application Engineers:

• Larger and smaller bore sizes available upon request
• Larger mounted component thickness (outside of X Ranges 1 and 2) can be easily accommodated.
Fully-threaded screws are required for mounted component thicknesses larger than X Range 2.
• Fenner Drives can engineer a custom B-LOC Compression Hub to meet your needs.
• Email: AE@fennerdrives.com
B-LOC ®
BCH Metric socket head
50
locking screws
ISO 4762 grade 12.9
(See Ma for install
torque).
Inch
Locking screws transfer to
integrated push-off holes
for disassembly. TOLERANCE (TL)
Recommended bore diameter d1 +.001" / +.003"

Screw head height = screw
diameter (mm)
Parallelism machined to X +/- .005"
BCH50 – Heavy Duty – Inch

Locking Maximum
Number (inch) (inch) (inch) (inch) (inch) Qty Size X (inch) (mm) X (inch) (mm) (ft lb) (ft lb) (lbs) (ksi) (lb)
BCH502008 1/2 1.85 0.384 0.984 1.457 5 M5 0.098 – 0.197 20 0.197 – 0.394 25 7 104 4970 42.5 0.7
BCH502010 5/8 1.85 0.384 0.984 1.457 5 M5 0.098 – 0.197 20 0.197 – 0.394 25 7 129 5510 33.9 0.4
BCH502012 3/4 2.047 0.384 1.181 1.654 6 M5 0.098 – 0.197 20 0.197 – 0.394 25 7 186 6610 33.9 0.7
BCH502014 7/8 2.283 0.463 1.398 1.890 6 M5 0.098 – 0.315 25 0.315 – 0.512 30 7 217 6610 24.2 0.9
BCH502015 15/16 2.283 0.463 1.398 1.890 6 M5 0.098 – 0.315 25 0.315 – 0.512 30 7 233 6610 22.6 0.9
BCH502100 1 2.283 0.463 1.398 1.890 6 M5 0.098 – 0.315 25 0.315 – 0.512 30 7 248 6610 21.2 0.9
BCH502102 1 1/8 2.559 0.463 1.594 2.126 8 M5 0.098 – 0.315 25 0.315 – 0.512 30 7 385 9130 26.0 1.1
BCH502103 1 3/16 2.559 0.463 1.594 2.126 8 M5 0.098 – 0.315 25 0.315 – 0.512 30 7 406 9130 24.7 1.1
BCH502104 1 1/4 2.953 0.561 1.850 2.362 8 M6 0.098 – 0.350 30 0.350 – 0.547 35 12 564 12030 26.5 1.8
BCH502106 1 3/8 2.953 0.561 1.850 2.362 8 M6 0.098 – 0.350 30 0.350 – 0.547 35 12 621 12030 24.1 1.8
BCH502107 1 7/16 3.307 0.561 2.047 2.598 10 M6 0.098 – 0.350 30 0.350 – 0.547 35 12 811 15040 28.7 2.2
BCH502108 1 1/2 3.307 0.561 2.047 2.598 10 M6 0.098 – 0.350 30 0.350 – 0.547 35 12 846 15040 27.6 2.2
BCH502110 1 5/8 3.78 0.699 2.362 2.992 7 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1261 20710 28.0 3.5
BCH502111 1 11/16 3.78 0.699 2.362 2.992 7 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1310 20710 27.0 3.5
BCH502112 1 3/4 3.78 0.699 2.362 2.992 7 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1358 20710 26.0 3.5
BCH502114 1 7/8 4.528 0.699 2.756 3.386 8 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1663 23650 27.7 5.3
BCH502115 1 15/16 4.528 0.699 2.756 3.386 8 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1719 23650 26.8 5.1
BCH502200 2 4.528 0.699 2.756 3.386 8 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1774 23650 26.0 5.1
BCH502202 2 1/8 4.528 0.699 2.756 3.386 8 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1885 23650 24.5 4.9
POWER TRANSMISSION
BCH502203 2 3/16 4.528 0.699 2.756 3.386 8 M8 0.098 – 0.323 35 0.323 – 0.630 45 30 1940 23650 23.8 4.9
BCH502204 2 1/4 5.433 0.797 3.268 4.016 8 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 3198 37900 32.5 8.6
BCH502206 2 3/8 5.433 0.797 3.268 4.016 8 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 3375 37900 30.7 8.4
BCH502207 2 7/16 5.433 0.797 3.268 4.016 8 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 3464 37900 29.9 8.4
BCH502208 2 1/2 5.433 0.797 3.268 4.016 8 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 3553 37900 29.1 8.2
BCH502209 2 9/16 5.433 0.797 3.268 4.016 8 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 3642 37900 28.4 8.2
BCH502210 2 5/8 6.142 0.797 3.740 4.409 9 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 4197 42630 31.3 10.8
BCH502212 2 3/4 6.142 0.797 3.740 4.409 9 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 4396 42630 29.9 10.6
BCH502214 2 7/8 6.142 0.797 3.740 4.409 9 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 4596 42630 28.6 10.4
BCH502215 2 15/16 6.142 0.797 3.740 4.409 9 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 4696 42630 28.0 10.1
BCH502300 3 6.142 0.797 3.740 4.409 9 M10 0.098 – 0.335 40 0.335 – 0.630 50 60 4796 42630 27.4 10.1
Part Number Ordering Guide

Base Screw Length Complete Part NOTES
Part Number
+ (based on X)
= Number 1. B-LOC Compression Hubs exert a maximum pressure on the
face of the mounted component of 250 N/mm2 (36 ksi).
BCH502110 035 BCH502110-035 2. B-LOC pilot diameter d1 machined to ISO tolerance h8.
3 digit whole number
Always in mm
35 = 035
B-LOC®
BCH
50
Metric
TOLERANCE (TL)
Recommended bore diameter d1 +.03mm / +.08mm

TL = .05mm for shafts up to 75mm
Parallelism machined to X +/- 0.13mm
BCH50 – Heavy Duty – Metric

Locking Maximum
Number (mm) (mm) (mm) (mm) (mm) Qty Size X (mm) (mm) X (mm) (mm) (Nm) (Nm) (kN) (N/mm2) (kg)
BCH501012 12 47 9.8 25 37.0 5 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 132 22.1 310 0.3
BCH501014 14 47 9.8 25 37.0 5 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 155 22.1 266 0.2
BCH501015 15 47 9.8 25 37.0 5 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 166 22.1 248 0.2
BCH501018 18 52 9.8 30 42.0 6 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 239 26.5 248 0.3
BCH501019 19 52 9.8 30 42.0 6 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 252 26.5 235 0.3
BCH501020 20 52 9.8 30 42.0 6 M5 2.5 – 5.0 20 5.0 – 10.0 25 10 265 26.5 223 0.3
BCH501022 22 58 11.8 35.5 48.0 6 M5 2.5 – 8.0 25 8.0 – 13.0 30 10 302 27.4 175 0.4
BCH501024 24 58 11.8 35.5 48.0 6 M5 2.5 – 8.0 25 8.0 – 13.0 30 10 329 27.4 160 0.4
BCH501025 25 58 11.8 35.5 48.0 6 M5 2.5 – 8.0 25 8.0 – 13.0 30 10 342 27.4 154 0.4
BCH501028 28 65 11.8 40.5 54.0 8 M5 2.5 – 8.0 25 8.0 – 13.0 30 10 511 36.5 183 0.5
BCH501030 30 65 11.8 40.5 54.0 8 M5 2.5 – 8.0 25 8.0 – 13.0 30 10 548 36.5 171 0.5
BCH501032 32 75 14.3 47 60.0 8 M6 2.5 – 8.9 30 8.9 – 13.9 35 16 771 48.2 181 0.8
BCH501035 35 75 14.3 47 60.0 8 M6 2.5 – 8.9 30 8.9 – 13.9 35 16 843 48.2 166 0.8
BCH501038 38 84 14.3 52 66.0 10 M6 2.5 – 8.9 30 8.9 – 13.9 35 16 1145 60.2 191 1
BCH501040 40 84 14.3 52 66.0 10 M6 2.5 – 8.9 30 8.9 – 13.9 35 16 1205 60.2 181 0.9
BCH501042 42 96 17.8 60 76.0 7 M8 2.5 – 8.2 35 8.2 – 16.0 45 41 1740 82.9 190 1.6
BCH501045 45 96 17.8 60 76.0 7 M8 2.5 – 8.2 35 8.2 – 16.0 45 41 1864 82.9 177 1.6
BCH501048 48 115 17.8 70 86.0 8 M8 2.5 – 8.2 35 8.2 – 16.0 45 41 2273 94.7 190 2.4
BCH501050 50 115 17.8 70 86.0 8 M8 2.5 – 8.2 35 8.2 – 16.0 45 41 2367 94.7 182 2.3
POWER TRANSMISSION
BCH501055 55 115 17.8 70 86.0 8 M8 2.5 – 8.2 35 8.2 – 16.0 45 41 2604 94.7 166 2.2
BCH501060 60 138 20.3 83 102.0 8 M10 2.5 – 8.5 40 8.5 – 16.0 50 81 4551 152 213 3.8
BCH501065 65 138 20.3 83 102.0 8 M10 2.5 – 8.5 40 8.5 – 16.0 50 81 4930 152 197 3.7
BCH501070 70 156 20.3 95 112.0 9 M10 2.5 – 8.5 40 8.5 – 16.0 50 81 5973 171 205 4.8
BCH501075 75 156 20.3 95 112.0 9 M10 2.5 – 8.5 40 8.5 – 16.0 50 81 6400 171 192 4.6
Contact our Application Engineers:

• Larger and smaller bore sizes available upon request
• Larger mounted component thickness (outside of X Ranges 1 and 2) can be easily accommodated.
Fully-threaded screws are required for mounted component thicknesses larger than X Range 2.
• Fenner Drives can engineer a custom B-LOC Compression Hub to meet your needs.
• Email: AE@fennerdrives.com
ENGINEERING DATA – B-LOC COMPRESSION HUBS
Principles of Operation Adhesives & Lubricants

B-LOC® Compression Hubs differ from other keyless locking B-LOC Keyless Locking Devices are supplied with an oil specific
devices in how they engage the mounted component. Rather than to the product line. The listed performance data requires the use of
creating a radial force on the mounted component, the outer these lubricants to provide the necessary coefficient of friction to the
tapered rings are drawn together to generate an axial clamping sliding surfaces. Likewise, do not use anaerobic adhesives such as
force. In this way, the mounted component is not subjected to Loctite®, Permatex® or similar compounds with Fenner Drives Keyless
tensile (hoop) stresses. This operating principle also allows narrow Locking Devices. Doing so results in unknown contact pressures and
components to be mounted with excellent runout. capacities. Furthermore, disassembly may be compromised when such
compounds are applied to the keyless bushing, the shaft and/or the
hub bore. The approved lubricant for use with B-LOC Compression
Hubs is CRC3-36.
Materials
B-LOC Keyless Locking Devices are made from carbon steels and
The mounted component’s
bore matches the pilot
heat treated alloy steels. For applications in corrosive environments,
diameter to maximize
concentricity.
corrosion resistance can be improved through sealing with grease or
silicone, the use of protective cover plates, application of industry
standard plating materials (e.g., nickel, thin dense chrome, etc.) or
by specifying the product in stainless steel or other corrosion resistant
Surface Finish materials. Please consult with a Fenner Drives Applications Engineer
Recommended surface finish for shafts to be used with B-LOC
for more details.
Compression Hubs is between 32 and 125 microinch (0.8 and 3.2
micrometer) RMS. A smoother finish — such as that found on Torque
components supplied TG&P (turned, ground and polished) — is T = peak drive torque = nominal torque multiplied by a safety factor
NOT recommended and can result in a failure of the connection. to account for stall or start-up conditions, mass accelerations, impact
Note that surface finishes below 32 microinch (0.8 micrometer) loads, etc. Nominal drive torque can be calculated as follows:
RMS can be roughened using longitudinal abrasion with a bastard
file, emery paper or similar to achieve a surface finish within the Mtnom (ft lb) = 5252 × HP
recommended range. The recommended surface finish on the rpm
contact faces of the mounted component is between 32 and 250
microinch (0.8 – 6.4 micrometer). Mtnom (Nm) = 9550 × kW
rpm
Concentricity
Consult with a Fenner Drives Applications Engineer in cases where
Fenner Drives Keyless Locking Devices are precision machined to
“T” is uncertain.
maximize concentricity and minimize runout. The final installed
concentricity of mounted components depends on several variables, Mt = The rated torque capacity of one Fenner Drives Keyless Locking
including the components themselves and the installation technique Device installed according to our instructions. Published torque
employed. In the case of B-LOC Compression Hubs, total runout capacities are calculated without using a safety factor and should be
POWER TRANSMISSION
can be minimized by machining the bore and contacting faces of considered as the point where a connection could slip if a higher
the mounted component to tight tolerances. torque is applied. Therefore, always select a unit where Mt ≥ T.
Made to Order
B-LOC Compression Hubs offer a unique design that can savings can be realized by stacking together lower cost individual
provide solutions for applications beyond the standard, single components. The compression hub simultaneously clamps the
chain sprocket application. Because compression hubs function assembly together and attaches the assembly to the shaft.
by clamping the mounted components in the axial direction, cost
A double strand chain sprocket can be Applications that require spacing between thin end Split sprocket designs are simplified by
easily made by adding a spacer between discs can be accommodated by extending the pilot utilizing an A-plate sprocket which is split in
two A-plate sprockets. surface through the end discs so that it engages a a way that provides positive engagement
spacer and keeps the entire assembly aligned. between the two halves.
B-LOC ®
Shrink Disc
SD10
Metric hex head

locking screws
DIN 931 grade 10.9 See Table 1 below for maximum
(See Ma for install torque). diametrical clearance between
shaft and hub bore.
SD10 — Standard Duty

SD bore Hub OD Shaft Diameter Ma Mt
(Hub OD) Tolerance Range Locking Screws Max. Transmitted Torque
Install Ship
Part d TLd ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H e d1 R wt
Qty Size
Number Size (inch) (inch) (inch) (inch) (ft lb) (ft lb) (ft lb) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (lb)
B0241 24-10 0.945 + 0 / -0.002 5/8 0.774 6 M5 x 16 3.6 138 278 1.417 1.97 0.551 0.71 0.080 1.023 1/16 0.5
B0301 30-10 1.181 + 0 / -0.002 3/4 0.967 7 M5 x 18 3.6 177 407 1.732 2.36 0.629 0.79 0.081 1.259 1/16 0.7
B0361 36-10 1.417 + 0 / -0.002 7/8 1.161 5 M6 x 20 8.7 315 666 2.047 2.83 0.700 0.87 0.085 1.496 1/16 0.9
B0441 44-10 1.732 + 0 / -0.002 1 1/8 1.419 7 M6 x 20 8.7 683 1198 2.402 3.15 0.787 0.94 0.077 1.850 1/16 1.4
B0501 50-10 1.969 + 0 / -0.002 1 3/8 1.612 8 M6 x 22 8.7 964 1565 2.756 3.54 0.866 1.02 0.077 2.086 1/16 1.8
B0551 55-10 2.165 + 0 / -0.002 1 1/2 1.773 8 M6 x 25 8.7 1014 1707 2.953 3.94 0.905 1.14 0.118 2.283 3/32 2.4
B0621 62-10 2.441 + 0 / -0.002 1 3/4 1.999 10 M6 x 25 8.7 1718 2375 3.386 4.33 0.905 1.14 0.118 2.598 3/32 2.9
B0681 68-10 2.677 + 0 / -0.002 1 7/8 2.193 10 M6 x 25 8.7 1760 2606 3.386 4.53 0.905 1.14 0.118 2.834 3/32 3
B0751 75-10 2.953 + 0 / -0.002 2 1/8 2.418 7 M8 x 25 22 2792 4057 3.937 5.43 0.984 1.22 0.118 3.110 1/8 3.8
B0801 80-10 3.150 + 0 / -0.002 2 3/8 2.580 7 M8 x 25 22 3416 4331 3.937 5.71 0.984 1.22 0.118 3.307 1/8 4.2
B0901 90-10 3.543 + 0 / -0.004 2 1/2 2.902 10 M8 x 30 22 4751 7139 4.488 6.10 1.181 1.49 0.155 3.700 1/8 7
H0951 95-10 3.740 + 0 / -0.004 2 3/4 3.063 12 M8 x 30 22 6832 9108 4.882 6.69 1.338 1.69 0.176 4.094 1/8 10
B1001 100-10 3.937 + 0 / -0.004 2 7/8 3.224 12 M8 x 35 22 7059 9586 4.882 6.69 1.338 1.69 0.176 4.094 1/8 10
B1101 110-10 4.331 + 0 / -0.004 3 1/8 3.547 9 M10 x 40 44 9013 12602 5.354 7.28 1.535 1.93 0.198 4.488 1/8 13
B1251 125-10 4.921 + 0 / -0.004 3 1/2 4.031 12 M10 x 40 44 13710 19540 6.299 8.46 1.653 2.04 0.194 5.275 1/8 18
B1401 140-10 5.512 + 0 / -0.004 4 4.514 10 M12 x 45 74 19648 26440 6.890 9.06 1.811 2.28 0.235 5.708 3/16 23
B1551 155-10 6.102 + 0 / -0.004 4 1/2 4.998 12 M12 x 50 74 27515 34049 7.559 10.36 1.968 2.44 0.236 6.496 3/16 31
H1651 165-10 6.496 + 0 / -0.004 4 7/8 5.320 8 M16 x 55 185 37737 47135 8.268 11.42 2.204 2.67 0.233 6.889 3/16 49
B1751 175-10 6.890 + 0 / -0.004 5 1/4 5.643 8 M16 x 55 185 41620 50005 8.661 11.81 2.204 2.67 0.233 7.283 3/16 50
B1851 185-10 7.283 + 0 / -0.004 5 5/8 5.965 10 M16 x 65 185 56802 65965 9.291 12.99 2.795 3.34 0.273 7.677 3/16 82
POWER TRANSMISSION
H1951 195-10 7.677 + 0 / -0.004 5 7/8 6.288 12 M16 x 65 185 71908 84926 9.685 13.78 2.795 3.34 0.273 8.110 3/16 91
B2001 200-10 7.874 + 0 / -0.004 6 1/4 6.449 12 M16 x 65 185 80674 87096 9.685 13.78 2.795 3.34 0.273 8.110 3/16 90
B2201 220-10 8.661 + 0 / -0.004 6 3/8 7.094 15 M16 x 80 185 92230 116425 10.630 14.57 3.464 4.06 0.298 8.897 1/4 119
B2401 240-10 9.449 + 0 / -0.004 7 7.739 12 M20 x 80 362 130645 161818 11.614 15.95 3.622 4.22 0.299 9.763 1/4 148
B2601 260-10 10.236 + 0 / -0.004 7 5/8 8.383 14 M20 x 90 362 162198 205263 12.638 16.93 4.055 4.69 0.318 10.511 1/4 181
H2801 280-10 11.024 + 0 / -0.005 8 3/8 9.028 16 M20 x 100 362 210581 253378 13.622 18.11 4.488 5.20 0.356 11.338 5/16 225
H3001 300-10 11.811 + 0 / -0.005 9 9.673 18 M20 x 100 362 257278 306749 14.331 19.10 4.803 5.52 0.359 12.125 5/16 260
H3201 320-10 12.598 + 0 / -0.005 9 5/8 10.318 20 M20 x 100 362 310492 359728 15.197 20.48 4.803 5.52 0.359 12.913 5/16 288
H3401 340-10 13.386 + 0 / -0.005 10 1/4 10.963 24 M20 x 110 362 392088 462391 16.063 22.44 5.276 6.14 0.432 13.700 5/16 409
H3501 350-10 13.780 + 0 / -0.005 10 7/8 11.285 24 M20 x 110 362 432685 474097 17.008 22.84 5.511 6.30 0.395 14.488 5/16 429
H3601 360-10 14.173 + 0 / -0.005 11 1/4 11.608 24 M20 x 110 362 451405 487702 17.008 23.23 5.511 6.30 0.395 14.488 5/16 449
H3801 380-10 14.961 + 0 / -0.005 11 1/2 12.253 20 M24 x 120 620 535005 623051 18.031 25.40 5.669 6.46 0.396 15.276 5/16 526
H3901 390-10 15.354 + 0 / -0.005 12 1/4 12.575 21 M24 x 120 620 633184 673847 18.425 25.99 5.669 6.46 0.396 15.629 3/8 572
H4201 420-10 16.535 + 0 / -0.006 12 1/2 13.543 24 M24 x 130 620 685493 829666 19.843 27.17 6.456 7.25 0.397 16.929 3/8 630
H4401 440-10 17.323 + 0 / -0.006 13 1/2 14.187 24 M24 x 130 620 768743 852536 20.748 29.53 6.969 7.95 0.491 17.716 3/8 835
H4601 460-10 18.110 + 0 / -0.006 14 1/8 14.832 28 M24 x 130 620 934194 1051580 21.535 30.32 6.969 7.95 0.491 18.425 3/8 924
H4801 480-10 18.898 + 0 / -0.006 14 3/4 15.477 30 M24 x 150 620 1047086 1176357 22.441 31.50 7.401 8.39 0.495 19.291 1/2 1110
H5001 500-10 19.685 + 0 / -0.006 15 3/8 16.122 24 M27 x 150 922 1169590 1310148 23.228 33.46 7.401 8.39 0.495 19.999 1/2 1265
Shaft Sizes Maximum

(inch) Diametrical
Clearance
Notes: Between Shaft
• Inner rings of all shrink discs are supplied with one lengthwise slit. > ≤ and Hub Bore
• Shrink discs are available for shafts up to 40" diameter and in a variety of special designs. 1 1/8 0.0010
• Maximum shaft sizes listed for Shrink Disc Series SD10 and SD30 reflect equal section 1 1/8 1 15/16 0.0015
moduli of shaft and hub (maximum shaft diameter = d ). 1 15/16 4 3/4 0.0020
1.221
• Larger shrink discs for shafts up to 40" diameter are available on request. 4 3/4 7 0.0030
7 10 0.0040
10 14 0.0050
14 0.0060
Table 1
For Series SD10, SD20 and SD30
B-LOC ®
Shrink Disc
SD20
SD30 SD10 SD20 SD30
Standard Duty Light Duty Heavy Duty
SD20 — Light Duty

(Hub OD) Tolerance Range Locking Screws Install Max. Transmitted Torque Ship
Qty Size
H1252 125-20 4.921 + 0 / -0.004 3 5/8 4.125 8 M10 x 40 44 9380 13343 6.220 7.28 1.535 2.01 0.238 5.118 1/8 13
H1402 140-20 5.512 + 0 / -0.004 4 1/4 5.000 9 M10 x 40 44 13691 20328 6.889 8.67 1.535 2.01 0.238 5.669 1/8 18
H1552 155-20 6.102 + 0 / -0.004 5 5.500 11 M10 x 40 44 21144 27447 7.559 9.65 1.535 2.01 0.238 6.259 1/8 22
H1652 165-20 6.496 + 0 / -0.004 5 3/8 5.750 10 M12 x 50 74 30652 36677 8.267 10.24 1.811 2.44 0.315 6.653 3/16 31
H1752 175-20 6.890 + 0 / -0.004 5 5/8 6.125 11 M12 x 50 74 34940 43588 8.661 10.83 1.811 2.44 0.315 7.047 3/16 35
H1852 185-20 7.283 + 0 / -0.004 6 6.500 12 M12 x 50 74 41643 51035 8.858 11.62 1.811 2.44 0.315 7.440 3/16 44
H1952 195-20 7.677 + 0 / -0.004 6 1/2 7.000 15 M12 x 60 74 58979 71073 9.330 12.40 2.204 2.84 0.318 7.834 3/16 60
H2202 220-20 8.661 + 0 / -0.004 7 7.875 10 M16 x 70 185 76454 100895 10.433 13.59 2.598 3.31 0.356 8.818 3/16 77
H2402 240-20 9.449 + 0 / -0.004 7 7/8 8.500 12 M16 x 70 185 107011 129864 11.417 14.57 2.598 3.31 0.356 9.606 1/4 97
H2602 260-20 10.236 + 0 / -0.004 8 5/8 9.250 14 M16 x 70 185 139939 166618 12.204 15.55 2.834 3.63 0.398 10.433 1/4 106
H2802 280-20 11.024 + 0 / -0.005 9 9.875 16 M16 x 75 185 158724 200396 13.110 16.74 3.307 4.10 0.397 11.220 1/4 132
H3002 300-20 11.811 + 0 / -0.005 9 7/8 10.625 18 M16 x 75 185 229935 271288 14.094 18.11 3.307 4.10 0.397 12.007 1/4 165
H3202 320-20 12.598 + 0 / -0.005 10 1/2 11.375 20 M16 x 75 185 238939 292045 14.881 19.49 3.307 4.18 0.437 12.795 1/4 185
H3402 340-20 13.386 + 0 / -0.005 11 3/8 12.000 21 M16 x 75 185 281000 320857 15.826 21.07 3.307 4.18 0.437 13.582 1/4 220
H3602 360-20 14.173 + 0 / -0.005 11 7/8 12.625 16 M20 x 90 362 341876 398029 16.653 21.85 3.937 4.81 0.437 14.370 5/16 275
H3802 380-20 14.961 + 0 / -0.005 12 1/2 13.000 18 M20 x 100 362 403340 444630 17.401 23.03 4.409 5.35 0.471 15.236 5/16 301
H3902 390-20 15.354 + 0 / -0.005 12 5/8 13.750 20 M20 x 100 362 446171 549086 17.795 23.43 4.409 5.36 0.476 15.629 5/16 344
H4202 420-20 16.535 + 0 / -0.006 13 3/4 14.625 22 M20 x 100 362 544495 625817 19.094 24.81 4.724 5.67 0.473 16.810 5/16 407
H4602 460-20 18.110 + 0 / -0.006 14 5/8 16.375 28 M20 x 110 362 704454 927856 20.747 26.97 5.196 6.22 0.512 18.425 3/8 517
H5002 500-20 19.685 + 0 / -0.006 16 1/4 17.375 30 M20 x 120 362 860127 1014952 22.519 29.53 5.984 7.01 0.513 19.999 3/8 704
SD30 — Heavy Duty

Qty Size
H0443 44-30 1.732 + 0 / -0.002 1 1/8 1.419 5 M8 x 30 22 941 1653 2.598 3.35 1.102 1.34 0.119 1.890 1/16 1.4
H0503 50-30 1.969 + 0 / -0.002 1 3/8 1.612 7 M8 x 35 22 1761 2749 2.874 3.74 1.181 1.54 0.180 1.984 1/16 1.8
H0553 55-30 2.165 + 0 / -0.002 1 1/2 1.773 7 M8 x 35 22 1892 3023 3.071 4.13 1.181 1.54 0.180 2.323 3/32 2.4
POWER TRANSMISSION
B0623 62-30 2.441 + 0 / -0.002 1 3/4 1.999 7 M8 x 35 22 2353 3244 3.346 4.53 1.181 1.54 0.180 2.598 3/32 2.9
B0683 68-30 2.677 + 0 / -0.002 1 7/8 2.193 8 M8 x 35 22 2861 4173 3.622 4.72 1.181 1.54 0.180 2.835 3/32 3
B0753 75-30 2.953 + 0 / -0.002 2 1/8 2.418 7 M10 x 40 44 4552 6529 4.134 5.71 1.417 1.81 0.197 3.307 1/8 3.8
B0803 80-30 3.150 + 0 / -0.002 2 3/8 2.580 7 M10 x 40 44 5541 6971 4.134 5.71 1.417 1.81 0.197 3.307 1/8 4.2
B0903 90-30 3.543 + 0 / -0.004 2 1/2 2.902 8 M10 x 40 44 5946 8994 4.567 6.30 1.575 1.97 0.198 3.701 1/8 7
B1003 100-30 3.937 + 0 / -0.004 2 7/8 3.224 10 M10 x 45 44 9370 12700 4.961 6.69 1.732 2.13 0.199 4.094 1/8 10
H1103 110-30 4.331 + 0 / -0.004 3 1/8 3.547 12 M10 x 45 44 12116 16879 5.354 7.28 1.969 2.36 0.196 4.482 1/8 17
H1253 125-30 4.921 + 0 / -0.004 3 1/2 4.031 12 M12 x 50 74 20092 28393 6.299 8.47 2.126 2.60 0.237 5.157 3/16 24
B1403 140-30 5.512 + 0 / -0.004 4 4.514 12 M12 x 60 74 23275 31491 6.889 9.06 2.362 2.92 0.279 5.744 3/16 29
H1553 155-30 6.102 + 0 / -0.004 4 1/2 4.998 15 M12 x 60 74 34154 42273 7.795 10.36 2.598 3.15 0.276 6.614 3/16 44
H1653 165-30 6.496 + 0 / -0.004 4 7/8 5.320 10 M16 x 70 185 46957 58743 8.267 11.42 2.834 3.47 0.318 6.940 3/16 57
H1753 175-30 6.890 + 0 / -0.004 5 1/4 5.643 10 M16 x 70 185 51804 62320 8.661 11.82 2.834 3.47 0.318 7.322 3/16 64
H1853 185-30 7.283 + 0 / -0.004 5 5/8 5.965 15 M16 x 80 185 86847 100371 9.291 12.99 3.622 4.41 0.394 7.704 3/16 104
H1953 195-30 7.677 + 0 / -0.004 5 7/8 6.288 15 M16 x 80 185 89488 105820 9.685 13.78 3.622 4.41 0.394 8.102 1/4 110
H2003 200-30 7.874 + 0 / -0.004 6 1/4 6.449 15 M16 x 80 185 100466 108524 9.685 13.78 3.622 4.41 0.394 8.102 1/4 110
H2203 220-30 8.661 + 0 / -0.004 6 3/8 7.094 20 M16 x 90 185 123458 155750 10.629 14.57 4.488 5.28 0.396 8.901 1/4 143
B2403 240-30 9.449 + 0 / -0.004 7 7.739 15 M20 x 100 362 162518 201425 11.614 15.95 4.724 5.67 0.473 9.692 1/4 192
H2603 260-30 10.236 + 0 / -0.005 7 5/8 8.383 18 M20 x 110 362 207733 263252 12.637 16.93 5.354 6.30 0.473 10.511 1/4 220
H2803 280-30 11.024 + 0 / -0.005 8 3/8 9.028 21 M20 x 120 362 276822 332933 13.622 18.11 5.826 6.77 0.472 11.370 5/16 291
H3003 300-30 11.811 + 0 / -0.005 9 9.673 22 M20 x 120 362 313789 374371 14.330 19.10 5.984 6.93 0.473 12.177 5/16 308
H3203 320-30 12.598 + 0 / -0.005 9 5/8 10.318 24 M20 x 120 362 368957 427823 15.196 20.48 6.299 7.25 0.476 12.964 5/16 363
H3403 340-30 13.386 + 0 / -0.005 10 1/4 10.963 21 M24 x 130 620 489329 577963 16.535 22.44 6.929 7.88 0.476 13.724 5/16 528
H3603 360-30 14.173 + 0 / -0.005 11 11.608 22 M24 x 140 620 562859 642534 17.007 23.23 7.086 8.04 0.477 14.515 3/8 550
H3903 390-30 15.354 + 0 / -0.005 11 5/8 12.575 24 M24 x 140 620 628949 762028 18.425 25.99 7.401 8.35 0.475 15.609 3/8 770
H4203 420-30 16.535 + 0 / -0.006 12 1/2 13.543 30 M24 x 160 620 852841 1033732 19.842 27.17 8.425 9.37 0.472 16.811 3/8 902
H4603 460-30 18.110 + 0 / -0.006 13 5/8 14.832 28 M27 x 170 922 1144559 1403894 21.535 30.32 8.818 9.93 0.556 18.503 1/2 1188
H5003 500-30 19.685 + 0 / -0.006 14 7/8 16.122 32 M27 x 180 922 1443359 1749331 23.622 33.47 9.685 10.79 0.552 19.999 1/2 1650
Notes: • Inner rings of all shrink discs are supplied with one lengthwise slit.
• Shrink discs are available for shafts up to 40" diameter and in a variety of special designs.
• Maximum shaft sizes listed for Shrink Disc Series SD10 and SD30 reflect equal section moduli of shaft and hub (maximum shaft diameter = d ).
• See Table 1 (bottom of page 77) for maximum diametrical clearance between shaft and hub bore. 1.221
Split and Half Shrink Discs

To complement our standard line of B-LOC Shrink Discs, we also offer Split and Half Shrink Discs. These versions
are available in all bore sizes listed for standard Shrink Discs. The Split Shrink Disc design allows greater mounting
versatility on symmetrical hubs. For applications with tight space constraints and lower performance requirements,
Half Shrink Discs provide several compact mounting options.
• Reduced dimensions – Perfect for applications with restricted space.
• Easy Installation – Standard screws mean installation and removal are achieved using standard tools.
• Inﬁnite Adjustment – Simplified design allows hubs to be located and locked virtually anywhere on the shaft.
• Easy Removal – Units are self-releasing once the locking screws are loosened, making removal a breeze.
• Reliability you can count on! B-LOC Shrink Discs can be tightened and released as often as required.
Detail A
POWER TRANSMISSION
Split Shrink Disc Half Shrink Disc Half Shrink Disc
Type HS Type HC Type HT
(Tapped holes in hub) (Clearance holes in hub)
Note: Dimension X is required when ordering Split or Half Shrink Disc Type HT. See Table 1 at bottom left
of page 80 for web clearance hole data. Please consult B-LOC Applications Engineering at AE@fennerdrives.com
to determine appropriate screw length for your specific application.
Split Shrink Discs

Standard and Light Duty Series: If dimension X > 2  L then the transmissible torque may be reduced by up to 50%.
Heavy Duty Series: If dimension X > 1  L then the transmissible torque may be reduced by up to 50%.
Half Shrink Discs

Half Shrink Discs HC/HT transmit 50% of the Mt of Shrink Discs and Split Shrink Discs.
B-LOC ®
Shrink Disc
Split
Detail A
Dimension X is required when ordering Split

Shrink Discs. See Table 1 at bottom left for
web clearance hole data.
Split Shrink Disc – Type HS
SD10 — Split SD — Standard Duty
Install Ship
Part d TLd ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H1 e d1 R wt
Qty Size
HS0241 24-10 0.945 + 0 / -0.002 5/8 0.774 6 M5 3.6 138 278 1.417 1.97 0.374 0.453 0.080 1.023 1/16 0.5
HS0301 30-10 1.181 + 0 / -0.002 3/4 0.967 7 M5 3.6 177 407 1.732 2.36 0.413 0.493 0.081 1.259 1/16 0.7
HS0361 36-10 1.417 + 0 / -0.002 7/8 1.161 5 M6 8.7 315 666 2.047 2.83 0.448 0.533 0.085 1.496 1/16 0.9
HS0441 44-10 1.732 + 0 / -0.002 1 1/8 1.419 7 M6 8.7 683 1198 2.402 3.15 0.492 0.568 0.077 1.850 1/16 1.4
HS0501 50-10 1.969 + 0 / -0.002 1 3/8 1.612 8 M6 8.7 964 1565 2.756 3.54 0.531 0.608 0.077 2.086 1/16 1.8
HS0551 55-10 2.165 + 0 / -0.002 1 1/2 1.773 8 M6 8.7 1014 1707 2.953 3.94 0.551 0.668 0.118 2.283 3/32 2.4
HS0621 62-10 2.441 + 0 / -0.002 1 3/4 1.999 10 M6 8.7 1718 2375 3.386 4.33 0.551 0.668 0.118 2.598 3/32 2.9
HS0681 68-10 2.677 + 0 / -0.002 1 7/8 2.193 10 M6 8.7 1760 2606 3.386 4.53 0.551 0.668 0.118 2.834 3/32 3
HS0751 75-10 2.953 + 0 / -0.002 2 1/8 2.418 7 M8 22 2792 4057 3.937 5.43 0.689 0.807 0.118 3.110 1/8 3.8
HS0801 80-10 3.150 + 0 / -0.002 2 3/8 2.580 7 M8 22 3416 4331 3.937 5.71 0.689 0.807 0.118 3.307 1/8 4.2
HS0901 90-10 3.543 + 0 / -0.004 2 1/2 2.902 10 M8 22 4751 7139 4.488 6.10 0.788 0.942 0.155 3.700 1/8 7
HS0951 95-10 3.740 + 0 / -0.004 2 3/4 3.063 12 M8 22 6832 9108 4.882 6.69 0.866 1.042 0.176 4.094 1/8 10
HS1001 100-10 3.937 + 0 / -0.004 2 7/8 3.224 12 M8 22 7059 9586 4.882 6.69 0.866 1.042 0.176 4.094 1/8 10
HS1101 110-10 4.331 + 0 / -0.004 3 1/8 3.547 9 M10 44 9013 12602 5.354 7.28 0.965 1.162 0.198 4.488 1/8 13
HS1251 125-10 4.921 + 0 / -0.004 3 1/2 4.031 12 M10 44 13710 19540 6.299 8.46 1.024 1.217 0.194 5.275 1/8 18
HS1401 140-10 5.512 + 0 / -0.004 4 4.514 10 M12 74 19648 26440 6.890 9.06 1.103 1.337 0.235 5.708 3/16 23
HS1551 155-10 6.102 + 0 / -0.004 4 1/2 4.998 12 M12 74 27515 34049 7.559 10.36 1.181 1.417 0.236 6.496 3/16 31
HS1651 165-10 6.496 + 0 / -0.004 4 7/8 5.320 8 M16 185 37737 47135 8.268 11.42 1.299 1.532 0.233 6.889 3/16 49
HS1751 175-10 6.890 + 0 / -0.004 5 1/4 5.643 8 M16 185 41620 50005 8.661 11.81 1.299 1.532 0.233 7.283 3/16 50
HS1851 185-10 7.283 + 0 / -0.004 5 5/8 5.965 10 M16 185 56802 65965 9.291 12.99 1.595 1.867 0.273 7.677 3/16 82
HS1951 195-10 7.677 + 0 / -0.004 5 7/8 6.288 12 M16 185 71908 84926 9.685 13.78 1.595 1.867 0.273 8.110 3/16 91
HS2001 200-10 7.874 + 0 / -0.004 6 1/4 6.449 12 M16 185 80674 87096 9.685 13.78 1.595 1.867 0.273 8.110 3/16 90
HS2201 220-10 8.661 + 0 / -0.004 6 3/8 7.094 15 M16 185 92230 116425 10.630 14.57 2.027 2.325 0.298 8.897 1/4 119
POWER TRANSMISSION
HS2401 240-10 9.449 + 0 / -0.004 7 7.739 12 M20 362 130645 161818 11.614 15.95 2.106 2.405 0.299 9.763 1/4 148
HS2601 260-10 10.236 + 0 / -0.004 7 5/8 8.383 14 M20 362 162198 205263 12.638 16.93 2.323 2.640 0.318 10.511 1/4 181
HS2801 280-10 11.024 + 0 / -0.005 8 3/8 9.028 16 M20 362 210581 253378 13.622 18.11 2.638 2.994 0.356 11.338 5/16 225
HS3001 300-10 11.811 + 0 / -0.005 9 9.673 18 M20 362 257278 306749 14.331 19.10 2.796 3.154 0.359 12.125 5/16 260
HS3201 320-10 12.598 + 0 / -0.005 9 5/8 10.318 20 M20 362 310492 359728 15.197 20.48 2.796 3.154 0.359 12.913 5/16 288
HS3401 340-10 13.386 + 0 / -0.005 10 1/4 10.963 24 M20 362 392088 462391 16.063 22.44 3.032 3.464 0.432 13.700 5/16 409
HS3501 350-10 13.780 + 0 / -0.005 10 7/8 11.285 24 M20 362 432685 474097 17.008 22.84 3.150 3.544 0.395 14.488 5/16 429
HS3601 360-10 14.173 + 0 / -0.005 11 1/4 11.608 24 M20 362 451405 487702 17.008 23.23 3.150 3.544 0.395 14.488 5/16 449
HS3801 380-10 14.961 + 0 / -0.005 11 1/2 12.253 20 M24 620 535005 623051 18.031 25.40 3.229 3.624 0.396 15.276 5/16 526
HS3901 390-10 15.354 + 0 / -0.005 12 1/4 12.575 21 M24 620 633184 673847 18.425 25.99 3.327 3.722 0.396 15.629 3/8 572
HS4201 420-10 16.535 + 0 / -0.006 12 1/2 13.543 24 M24 620 685493 829666 19.843 27.17 3.720 4.117 0.397 16.929 3/8 630
HS4401 440-10 17.323 + 0 / -0.006 13 1/2 14.187 24 M24 620 768743 852536 20.748 29.53 3.977 4.467 0.491 17.716 3/8 835
HS4601 460-10 18.110 + 0 / -0.006 14 1/8 14.832 28 M24 620 934194 1051580 21.535 30.32 3.977 4.467 0.491 18.425 3/8 924
HS4801 480-10 18.898 + 0 / -0.006 14 3/4 15.477 30 M24 620 1047086 1176357 22.441 31.50 4.292 4.786 0.495 19.291 1/2 1110
HS5001 500-10 19.685 + 0 / -0.006 15 3/8 16.122 24 M27 922 1169590 1310148 23.228 33.46 4.292 4.786 0.495 19.999 1/2 1265
Specifications for Web Clearance Holes (diameter in inches) Shaft Sizes Maximum
(inch) Diametrical
Screw Size M5 M6 M8 M10 M12 M16 M20 M24 M27 Clearance
Between Shaft
Split Shrink Disc 0.281 0.328 0.406 0.500 0.594 0.750 0.906 1.063 1.188 > ≤ and Hub Bore
Half Shrink Disc HT 0.219 0.266 0.359 0.438 0.531 0.719 0.875 1.031 1.156
1 1/8 0.0010
Table 1
1 1/8 1 15/16 0.0015
1 15/16 4 3/4 0.0020
Notes:
• Screw length must be determined based on your X dimension. Please consult Applications Engineering. 4 3/4 7 0.0030
• Inner rings of all shrink discs are supplied with one lengthwise slit. 7 10 0.0040
• Shrink discs are available for shafts up to 40" diameter and in a variety of special designs. 10 14 0.0050
• Maximum shaft sizes listed for Shrink Disc Series SD10 and SD30 reflect equal section moduli of shaft 14 0.0060
and hub (maximum shaft diameter = d ).
1.221 Table 2
• Larger shrink discs for shafts up to 40" diameter are available on request. For Series SD10, SD20 and SD30
B-LOC ®
Shrink Disc
Split
SD20 — Split SD — Light Duty
Qty Size
HS1252 125-20 4.921 + 0 / -0.004 3 5/8 4.125 8 M10 44 9380 13343 6.220 7.28 0.965 1.202 0.238 5.118 1/8 13
HS1402 140-20 5.512 + 0 / -0.004 4 1/4 5.000 9 M10 44 13691 20328 6.889 8.67 0.965 1.202 0.238 5.669 1/8 18
HS1552 155-20 6.102 + 0 / -0.004 5 5.500 11 M10 44 21144 27447 7.559 9.65 0.965 1.202 0.238 6.259 1/8 22
HS1652 165-20 6.496 + 0 / -0.004 5 3/8 5.750 10 M12 74 30652 36677 8.267 10.24 1.103 1.417 0.315 6.653 3/16 31
HS1752 175-20 6.890 + 0 / -0.004 5 5/8 6.125 11 M12 74 34940 43588 8.661 10.83 1.103 1.417 0.315 7.047 3/16 35
HS1852 185-20 7.283 + 0 / -0.004 6 6.500 12 M12 74 41643 51035 8.858 11.62 1.103 1.417 0.315 7.440 3/16 44
HS1952 195-20 7.677 + 0 / -0.004 6 1/2 7.000 15 M12 74 58979 71073 9.330 12.40 1.299 1.617 0.318 7.834 3/16 60
HS2202 220-20 8.661 + 0 / -0.004 7 7.875 10 M16 185 76454 100895 10.433 13.59 1.496 1.852 0.356 8.818 3/16 77
HS2402 240-20 9.449 + 0 / -0.004 7 7/8 8.500 12 M16 185 107011 129864 11.417 14.57 1.594 1.950 0.356 9.606 1/4 97
HS2602 260-20 10.236 + 0 / -0.004 8 5/8 9.250 14 M16 185 139939 166618 12.204 15.55 1.712 2.110 0.398 10.433 1/4 106
HS2802 280-20 11.024 + 0 / -0.005 9 9.875 16 M16 185 158724 200396 13.110 16.74 1.949 2.345 0.397 11.220 1/4 132
HS3002 300-20 11.811 + 0 / -0.005 9 7/8 10.625 18 M16 185 229935 271288 14.094 18.11 1.949 2.345 0.397 12.007 1/4 165
HS3202 320-20 12.598 + 0 / -0.005 10 1/2 11.375 20 M16 185 238939 292045 14.881 19.49 1.949 2.385 0.437 12.795 1/4 185
HS3402 340-20 13.386 + 0 / -0.005 11 3/8 12.000 21 M16 185 281000 320857 15.826 21.07 1.949 2.385 0.437 13.582 1/4 220
HS3602 360-20 14.173 + 0 / -0.005 11 7/8 12.625 16 M20 362 341876 398029 16.653 21.85 2.363 2.799 0.437 14.370 5/16 275
HS3802 380-20 14.961 + 0 / -0.005 12 1/2 13.000 18 M20 362 403340 444630 17.401 23.03 2.599 3.069 0.471 15.236 5/16 301
HS3902 390-20 15.354 + 0 / -0.005 12 5/8 13.750 20 M20 362 446171 549086 17.795 23.43 2.599 3.074 0.476 15.629 5/16 344
HS4202 420-20 16.535 + 0 / -0.006 13 3/4 14.625 22 M20 362 544495 625817 19.094 24.81 2.756 3.229 0.473 16.810 5/16 407
HS4602 460-20 18.110 + 0 / -0.006 14 5/8 16.375 28 M20 362 704454 927856 20.747 26.97 3.090 3.602 0.512 18.425 3/8 517
HS5002 500-20 19.685 + 0 / -0.006 16 1/4 17.375 30 M20 362 860127 1014952 22.519 29.53 3.484 3.997 0.513 19.999 3/8 704
SD30 — Split SD — Heavy Duty

Qty Size
HS0443 44-30 1.732 + 0 / -0.002 1 1/8 1.419 5 M8 22 941 1653 2.598 3.35 0.649 0.768 0.119 1.890 1/16 1.4
HS0503 50-30 1.969 + 0 / -0.002 1 3/8 1.612 7 M8 22 1761 2749 2.874 3.74 0.689 0.868 0.180 1.984 1/16 1.8
POWER TRANSMISSION
HS0553 55-30 2.165 + 0 / -0.002 1 1/2 1.773 7 M8 22 1892 3023 3.071 4.13 0.689 0.868 0.180 2.323 3/32 2.4
HS0623 62-30 2.441 + 0 / -0.002 1 3/4 1.999 7 M8 22 2353 3244 3.346 4.53 0.689 0.868 0.180 2.598 3/32 2.9
HS0683 68-30 2.677 + 0 / -0.002 1 7/8 2.193 8 M8 22 2861 4173 3.622 4.72 0.689 0.868 0.180 2.835 3/32 3
HS0753 75-30 2.953 + 0 / -0.002 2 1/8 2.418 7 M10 44 4552 6529 4.134 5.71 0.906 1.102 0.197 3.307 1/8 3.8
HS0803 80-30 3.150 + 0 / -0.002 2 3/8 2.580 7 M10 44 5541 6971 4.134 5.71 0.906 1.102 0.197 3.307 1/8 4.2
HS0903 90-30 3.543 + 0 / -0.004 2 1/2 2.902 8 M10 44 5946 8994 4.567 6.30 0.985 1.182 0.198 3.701 1/8 7
HS1003 100-30 3.937 + 0 / -0.004 2 7/8 3.224 10 M10 44 9370 12700 4.961 6.69 1.063 1.262 0.199 4.094 1/8 10
HS1103 110-30 4.331 + 0 / -0.004 3 1/8 3.547 12 M10 44 12116 16879 5.354 7.28 1.182 1.377 0.196 4.482 1/8 17
HS1253 125-30 4.921 + 0 / -0.004 3 1/2 4.031 12 M12 74 20092 28393 6.299 8.47 1.260 1.497 0.237 5.157 3/16 24
HS1403 140-30 5.512 + 0 / -0.004 4 4.514 12 M12 74 23275 31491 6.889 9.06 1.378 1.657 0.279 5.744 3/16 29
HS1553 155-30 6.102 + 0 / -0.004 4 1/2 4.998 15 M12 74 34154 42273 7.795 10.36 1.496 1.772 0.276 6.614 3/16 44
HS1653 165-30 6.496 + 0 / -0.004 4 7/8 5.320 10 M16 185 46957 58743 8.267 11.42 1.614 1.932 0.318 6.940 3/16 57
HS1753 175-30 6.890 + 0 / -0.004 5 1/4 5.643 10 M16 185 51804 62320 8.661 11.82 1.614 1.932 0.318 7.322 3/16 64
HS1853 185-30 7.283 + 0 / -0.004 5 5/8 5.965 15 M16 185 86847 100371 9.291 12.99 2.008 2.402 0.394 7.704 3/16 104
HS1953 195-30 7.677 + 0 / -0.004 5 7/8 6.288 15 M16 185 89488 105820 9.685 13.78 2.106 2.500 0.394 8.102 1/4 110
HS2003 200-30 7.874 + 0 / -0.004 6 1/4 6.449 15 M16 185 100466 108524 9.685 13.78 2.106 2.500 0.394 8.102 1/4 110
HS2203 220-30 8.661 + 0 / -0.004 6 3/8 7.094 20 M16 185 123458 155750 10.629 14.57 2.539 2.935 0.396 8.901 1/4 143
HS2403 240-30 9.449 + 0 / -0.004 7 7.739 15 M20 362 162518 201425 11.614 15.95 2.657 3.130 0.473 9.692 1/4 192
HS2603 260-30 10.236 + 0 / -0.005 7 5/8 8.383 18 M20 362 207733 263252 12.637 16.93 2.972 3.445 0.473 10.511 1/4 220
HS2803 280-30 11.024 + 0 / -0.005 8 3/8 9.028 21 M20 362 276822 332933 13.622 18.11 3.307 3.779 0.472 11.370 5/16 291
HS3003 300-30 11.811 + 0 / -0.005 9 9.673 22 M20 362 313789 374371 14.330 19.10 3.386 3.859 0.473 12.177 5/16 308
HS3203 320-30 12.598 + 0 / -0.005 9 5/8 10.318 24 M20 362 368957 427823 15.196 20.48 3.544 4.019 0.476 12.964 5/16 363
HS3403 340-30 13.386 + 0 / -0.005 10 1/4 10.963 21 M24 620 489329 577963 16.535 22.44 3.859 4.334 0.476 13.724 5/16 528
HS3603 360-30 14.173 + 0 / -0.005 11 11.608 22 M24 620 562859 642534 17.007 23.23 4.035 4.512 0.477 14.515 3/8 550
HS3903 390-30 15.354 + 0 / -0.005 11 5/8 12.575 24 M24 620 628949 762028 18.425 25.99 4.193 4.667 0.475 15.609 3/8 770
HS4203 420-30 16.535 + 0 / -0.006 12 1/2 13.543 30 M24 620 852841 1033732 19.842 27.17 4.705 5.177 0.472 16.811 3/8 902
HS4603 460-30 18.110 + 0 / -0.006 13 5/8 14.832 28 M27 922 1144559 1403894 21.535 30.32 5.000 5.556 0.556 18.503 1/2 1188
HS5003 500-30 19.685 + 0 / -0.006 14 7/8 16.122 32 M27 922 1443359 1749331 23.622 33.47 5.434 5.986 0.552 19.999 1/2 1650
B-LOC ® X
Shrink Disc
Half
H1
D
A
Detail B
d1
d e L
ds Dimension X is required when
See Detail B ordering Half Shrink Disc Type HT.
See Table 1 at bottom left for web
clearance hole data.
Half Shrink Disc Type HC Half Shrink Disc Type HT
SD10 — Half SD — Standard Duty

Type HC Type HT Install Ship
Part Part d T Ld ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H1 e d1 R wt
Qty HC Size HT Size
Number Number Size (inch) (inch) (inch) (inch) (ft lb) (ft lb) (ft lb) (inch) (inch) (inch) (inch) (inch) (inch) (inch) (lb)
HHC0241 HHT0241 24-10 0.945 + 0 / -0.002 5/8 0.774 6 M5 x 16 M5 3.6 69 139 1.417 1.97 0.374 0.453 0.080 1.023 1/16 0.3
HHC0301 HHT0301 30-10 1.181 + 0 / -0.002 3/4 0.967 7 M5 x 18 M5 3.6 89 204 1.732 2.36 0.413 0.493 0.081 1.259 1/16 0.4
HHC0361 HHT0361 36-10 1.417 + 0 / -0.002 7/8 1.161 5 M6 x 20 M6 8.7 158 333 2.047 2.83 0.448 0.533 0.085 1.496 1/16 0.6
HHC0441 HHT0441 44-10 1.732 + 0 / -0.002 1 1/8 1.419 7 M6 x 20 M6 8.7 342 599 2.402 3.15 0.492 0.568 0.077 1.850 1/16 0.8
HHC0501 HHT0501 50-10 1.969 + 0 / -0.002 1 3/8 1.612 8 M6 x 22 M6 8.7 482 783 2.756 3.54 0.531 0.608 0.077 2.086 1/16 1
HHC0551 HHT0551 55-10 2.165 + 0 / -0.002 1 1/2 1.773 8 M6 x 25 M6 8.7 507 854 2.953 3.94 0.551 0.668 0.118 2.283 3/32 1.4
HHC0621 HHT0621 62-10 2.441 + 0 / -0.002 1 3/4 1.999 10 M6 x 25 M6 8.7 859 1188 3.386 4.33 0.551 0.668 0.118 2.598 3/32 1.6
HHC0681 HHT0681 68-10 2.677 + 0 / -0.002 1 7/8 2.193 10 M6 x 25 M6 8.7 880 1303 3.386 4.53 0.551 0.668 0.118 2.834 3/32 1.6
HHC0751 HHT0751 75-10 2.953 + 0 / -0.002 2 1/8 2.418 7 M8 x 25 M8 22 1396 2029 3.937 5.43 0.689 0.807 0.118 3.110 1/8 2.6
HHC0801 HHT0801 80-10 3.150 + 0 / -0.002 2 3/8 2.580 7 M8 x 25 M8 22 1708 2166 3.937 5.71 0.689 0.807 0.118 3.307 1/8 2.8
HHC0901 HHT0901 90-10 3.543 + 0 / -0.004 2 1/2 2.902 10 M8 x 30 M8 22 2376 3570 4.488 6.10 0.788 0.942 0.155 3.700 1/8 4
HHC0951 HHT0951 95-10 3.740 + 0 / -0.004 2 3/4 3.063 12 M8 x 30 M8 22 3416 4554 4.882 6.69 0.866 1.042 0.176 4.094 1/8 6
HHC1001 HHT1001 100-10 3.937 + 0 / -0.004 2 7/8 3.224 12 M8 x 35 M8 22 3530 4793 4.882 6.69 0.866 1.042 0.176 4.094 1/8 6
HHC1101 HHT1101 110-10 4.331 + 0 / -0.004 3 1/8 3.547 9 M10 x 40 M10 44 4507 6301 5.354 7.28 0.965 1.162 0.198 4.488 1/8 7
HHC1251 HHT1251 125-10 4.921 + 0 / -0.004 3 1/2 4.031 12 M10 x 40 M10 44 6855 9770 6.299 8.46 1.024 1.217 0.194 5.275 1/8 11
HHC1401 HHT1401 140-10 5.512 + 0 / -0.004 4 4.514 10 M12 x 45 M12 74 9824 13220 6.890 9.06 1.103 1.337 0.235 5.708 3/16 13
HHC1551 HHT1551 155-10 6.102 + 0 / -0.004 4 1/2 4.998 12 M12 x 50 M12 74 13758 17025 7.559 10.36 1.181 1.417 0.236 6.496 3/16 17
HHC1651 HHT1651 165-10 6.496 + 0 / -0.004 4 7/8 5.320 8 M16 x 55 M16 185 18869 23568 8.268 11.42 1.299 1.532 0.233 6.889 3/16 24
HHC1751 HHT1751 175-10 6.890 + 0 / -0.004 5 1/4 5.643 8 M16 x 55 M16 185 20810 25003 8.661 11.81 1.299 1.532 0.233 7.283 3/16 25
HHC1851 HHT1851 185-10 7.283 + 0 / -0.004 5 5/8 5.965 10 M16 x 65 M16 185 28401 32983 9.291 12.99 1.595 1.867 0.273 7.677 3/16 39
HHC1951 HHT1951 195-10 7.677 + 0 / -0.004 5 7/8 6.288 12 M16 x 65 M16 185 35954 42463 9.685 13.78 1.595 1.867 0.273 8.110 3/16 44
HHC2001 HHT2001 200-10 7.874 + 0 / -0.004 6 1/4 6.449 12 M16 x 65 M16 185 40337 43548 9.685 13.78 1.595 1.867 0.273 8.110 3/16 43
HHC2201 HHT2201 220-10 8.661 + 0 / -0.004 6 3/8 7.094 15 M16 x 80 M16 185 46115 58213 10.630 14.57 2.027 2.325 0.298 8.897 1/4 57
POWER TRANSMISSION
HHC2401 HHT2401 240-10 9.449 + 0 / -0.004 7 7.739 12 M20 x 80 M20 362 65323 80909 11.614 15.95 2.106 2.405 0.299 9.763 1/4 72
HHC2601 HHT2601 260-10 10.236 + 0 / -0.004 7 5/8 8.383 14 M20 x 90 M20 362 81099 102632 12.638 16.93 2.323 2.640 0.318 10.511 1/4 89
HHC2801 HHT2801 280-10 11.024 + 0 / -0.005 8 3/8 9.028 16 M20 x 100 M20 362 105291 126689 13.622 18.11 2.638 2.994 0.356 11.338 5/16 115
HHC3001 HHT3001 300-10 11.811 + 0 / -0.005 9 9.673 18 M20 x 100 M20 362 128639 153375 14.331 19.10 2.796 3.154 0.359 12.125 5/16 133
HHC3201 HHT3201 320-10 12.598 + 0 / -0.005 9 5/8 10.318 20 M20 x 100 M20 362 155246 179864 15.197 20.48 2.796 3.154 0.359 12.913 5/16 153
HHC3401 HHT3401 340-10 13.386 + 0 / -0.005 10 1/4 10.963 24 M20 x 110 M20 362 196044 231196 16.063 22.44 3.032 3.464 0.432 13.700 5/16 209
HHC3501 HHT3501 350-10 13.780 + 0 / -0.005 10 7/8 11.285 24 M20 x 110 M20 362 216343 237049 17.008 22.84 3.150 3.544 0.395 14.488 5/16 220
HHC3601 HHT3601 360-10 14.173 + 0 / -0.005 11 1/4 11.608 24 M20 x 110 M20 362 225703 243851 17.008 23.23 3.150 3.544 0.395 14.488 5/16 225
HHC3801 HHT3801 380-10 14.961 + 0 / -0.005 11 1/2 12.253 20 M24 x 120 M24 620 267503 311526 18.031 25.40 3.229 3.624 0.396 15.276 5/16 292
HHC3901 HHT3901 390-10 15.354 + 0 / -0.005 12 1/4 12.575 21 M24 x 120 M24 620 316592 336924 18.425 25.99 3.327 3.722 0.396 15.629 3/8 305
HHC4201 HHT4201 420-10 16.535 + 0 / -0.006 12 1/2 13.543 24 M24 x 130 M24 620 342747 414833 19.843 27.17 3.720 4.117 0.397 16.929 3/8 364
HHC4401 HHT4401 440-10 17.323 + 0 / -0.006 13 1/2 14.187 24 M24 x 130 M24 620 384372 426268 20.748 29.53 3.977 4.467 0.491 17.716 3/8 467
HHC4601 HHT4601 460-10 18.110 + 0 / -0.006 14 1/8 14.832 28 M24 x 130 M24 620 467097 525790 21.535 30.32 3.977 4.467 0.491 18.425 3/8 483
HHC4801 HHT4801 480-10 18.898 + 0 / -0.006 14 3/4 15.477 30 M24 x 150 M24 620 523543 588179 22.441 31.50 4.292 4.786 0.495 19.291 1/2 555
HHC5001 HHT5001 500-10 19.685 + 0 / -0.006 15 3/8 16.122 24 M27 x 150 M27 922 584795 655074 23.228 33.46 4.292 4.786 0.495 19.999 1/2 626
Specifications for Web Clearance Holes (diameter in inches) Shaft Sizes Maximum
(inch) Diametrical
Screw Size M5 M6 M8 M10 M12 M16 M20 M24 M27 Clearance
Between Shaft
Split Shrink Disc 0.281 0.328 0.406 0.500 0.594 0.750 0.906 1.063 1.188 > ≤ and Hub Bore
Half Shrink Disc HT 0.219 0.266 0.359 0.438 0.531 0.719 0.875 1.031 1.156
1 1/8 0.0010
Table 1 1 1/8 1 15/16 0.0015
1 15/16 4 3/4 0.0020
Notes: 4 3/4 7 0.0030
• Type HT: Screw length must be determined based on your X dimension. Please consult Applications Engineering.
7 10 0.0040
• Inner rings of all shrink discs are supplied with one lengthwise slit.
10 14 0.0050
• Shrink discs are available for shafts up to 40" diameter and in a variety of special designs.
• Maximum shaft sizes listed for Shrink Disc Series SD10 and SD30 reflect equal section moduli of shaft and 14 0.0060
hub (maximum shaft diameter = d ).
Table 2
1.221
For Series SD10, SD20 and SD30
• Larger shrink discs for shafts up to 40" diameter are available on request.
B-LOC ®
Shrink Disc
Half
SD20 — Half SD — Light Duty
(Hub OD) Tolerance Range Locking Screws
Type HC Type HT Install Max. Transmitted Torque Ship
Part Part d TLd ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H1 e d1 R wt
Qty HC Size HT Size
HHC1252 HHT1252 125-20 4.921 + 0 / -0.004 3 5/8 4.125 8 M10 x 40 M10 44 4690 6672 6.220 7.28 0.965 1.202 0.238 5.118 1/8 7
HHC1402 HHT1402 140-20 5.512 + 0 / -0.004 4 1/4 5.00 9 M10 x 40 M10 44 6846 10164 6.889 8.67 0.965 1.202 0.238 5.669 1/8 10
HHC1552 HHT1552 155-20 6.102 + 0 / -0.004 5 5.500 11 M10 x 40 M10 44 10572 13724 7.559 9.65 0.965 1.202 0.238 6.259 1/8 12
HHC1652 HHT1652 165-20 6.496 + 0 / -0.004 5 3/8 5.750 10 M12 x 50 M12 74 15326 18339 8.267 10.24 1.103 1.417 0.315 6.653 3/16 16
HHC1752 HHT1752 175-20 6.890 + 0 / -0.004 5 5/8 6.125 11 M12 x 50 M12 74 17470 21794 8.661 10.83 1.103 1.417 0.315 7.047 3/16 17
HHC1852 HHT1852 185-20 7.283 + 0 / -0.004 6 6.500 12 M12 x 50 M12 74 20822 25518 8.858 11.62 1.103 1.417 0.315 7.440 3/16 20
HHC1952 HHT1952 195-20 7.677 + 0 / -0.004 6 1/2 7.000 15 M12 x 60 M12 74 29490 35537 9.330 12.40 1.299 1.617 0.318 7.834 3/16 27
HHC2202 HHT2202 220-20 8.661 + 0 / -0.004 7 7.875 10 M16 x 70 M16 185 38227 50448 10.433 13.59 1.496 1.852 0.356 8.818 3/16 37
HHC2402 HHT2402 240-20 9.449 + 0 / -0.004 7 7/8 8.500 12 M16 x 70 M16 185 53506 64932 11.417 14.57 1.594 1.950 0.356 9.606 1/4 42
HHC2602 HHT2602 260-20 10.236 + 0 / -0.004 8 5/8 9.250 14 M16 x 70 M16 185 69970 83309 12.204 15.55 1.712 2.110 0.398 10.433 1/4 51
HHC2802 HHT2802 280-20 11.024 + 0 / -0.005 9 9.875 16 M16 x 75 M16 185 79362 100198 13.110 16.74 1.949 2.345 0.397 11.220 1/4 67
HHC3002 HHT3002 300-20 11.811 + 0 / -0.005 9 7/8 10.625 18 M16 x 75 M16 185 114968 135644 14.094 18.11 1.949 2.345 0.397 12.007 1/4 79
HHC3202 HHT3202 320-20 12.598 + 0 / -0.005 10 1/2 11.375 20 M16 x 75 M16 185 119470 146023 14.881 19.49 1.949 2.385 0.437 12.795 1/4 96
HHC3402 HHT3402 340-20 13.386 + 0 / -0.005 11 3/8 12.000 21 M16 x 75 M16 185 140500 160429 15.826 21.07 1.949 2.385 0.437 13.582 1/4 114
HHC3602 HHT3602 360-20 14.173 + 0 / -0.005 11 7/8 12.625 16 M20 x 90 M20 362 170938 199015 16.653 21.85 2.363 2.799 0.437 14.370 5/16 137
HHC3802 HHT3802 380-20 14.961 + 0 / -0.005 12 1/2 13.000 18 M20 x 100 M20 362 201670 222315 17.401 23.03 2.599 3.069 0.471 15.236 5/16 168
HHC3902 HHT3902 390-20 15.354 + 0 / -0.005 12 5/8 13.75 20 M20 x 100 M20 362 223086 274543 17.795 23.43 2.599 3.074 0.476 15.629 5/16 172
HHC4202 HHT4202 420-20 16.535 + 0 / -0.006 13 3/4 14.625 22 M20 x 100 M20 362 272248 312909 19.094 24.81 2.756 3.229 0.473 16.810 5/16 199
HHC4602 HHT4602 460-20 18.110 + 0 / -0.006 14 5/8 16.375 28 M20 x 110 M20 362 352227 463928 20.747 26.97 3.090 3.602 0.512 18.425 3/8 257
HHC5002 HHT5002 500-20 19.685 + 0 / -0.006 16 1/4 17.375 30 M20 x 120 M20 362 430064 507476 22.519 29.53 3.484 3.997 0.513 19.999 3/8 350
SD30 — Half SD — Heavy Duty

Type HC Type HT Install Ship
Part Part d TLd ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H1 e d1 R wt
Qty HC Size HT Size
HHC0443 HHT0443 44-30 1.732 + 0 / -0.002 1 1/8 1.419 5 M8 x 30 M8 22 471 827 2.598 3.35 0.649 0.768 0.119 1.890 1/16 1.2
HHC0503 HHT0503 50-30 1.969 + 0 / -0.002 1 3/8 1.612 7 M8 x 35 M8 22 881 1375 2.874 3.74 0.689 0.868 0.180 1.984 1/16 1.8
POWER TRANSMISSION
HHC0553 HHT0553 55-30 2.165 + 0 / -0.002 1 1/2 1.773 7 M8 x 35 M8 22 946 1512 3.071 4.13 0.689 0.868 0.180 2.323 3/32 2.1
HHC0623 HHT0623 62-30 2.441 + 0 / -0.002 1 3/4 1.999 7 M8 x 35 M8 22 1177 1622 3.346 4.53 0.689 0.868 0.180 2.598 3/32 2.3
HHC0683 HHT0683 68-30 2.677 + 0 / -0.002 1 7/8 2.193 8 M8 x 35 M8 22 1431 2087 3.622 4.72 0.689 0.868 0.180 2.835 3/32 2.5
HHC0753 HHT0753 75-30 2.953 + 0 / -0.002 2 1/8 2.418 7 M10 x 40 M10 44 2276 3265 4.134 5.71 0.906 1.102 0.197 3.307 1/8 4.6
HHC0803 HHT0803 80-30 3.150 + 0 / -0.002 2 3/8 2.580 7 M10 x 40 M10 44 2771 3486 4.134 5.71 0.906 1.102 0.197 3.307 1/8 4.4
HHC0903 HHT0903 90-30 3.543 + 0 / -0.004 2 1/2 2.902 8 M10 x 40 M10 44 2973 4497 4.567 6.30 0.985 1.182 0.198 3.701 1/8 6
HHC1003 HHT1003 100-30 3.937 + 0 / -0.004 2 7/8 3.224 10 M10 x 45 M10 44 4685 6350 4.961 6.69 1.063 1.262 0.199 4.094 1/8 7
HHC1103 HHT1103 110-30 4.331 + 0 / -0.004 3 1/8 3.547 12 M10 x 45 M10 44 6058 8440 5.354 7.28 1.182 1.377 0.196 4.482 1/8 9
HHC1253 HHT1253 125-30 4.921 + 0 / -0.004 3 1/2 4.031 12 M12 x 50 M12 74 10046 14197 6.299 8.47 1.260 1.497 0.237 5.157 3/16 13
HHC1403 HHT1403 140-30 5.512 + 0 / -0.004 4 4.514 12 M12 x 60 M12 74 11638 15746 6.889 9.06 1.378 1.657 0.279 5.744 3/16 16
HHC1553 HHT1553 155-30 6.102 + 0 / -0.004 4 1/2 4.998 15 M12 x 60 M12 74 17077 21137 7.795 10.36 1.496 1.772 0.276 6.614 3/16 23
HHC1653 HHT1653 165-30 6.496 + 0 / -0.004 4 7/8 5.320 10 M16 x 70 M16 185 23479 29372 8.267 11.42 1.614 1.932 0.318 6.940 3/16 32
HHC1753 HHT1753 175-30 6.890 + 0 / -0.004 5 1/4 5.643 10 M16 x 70 M16 185 25902 31160 8.661 11.82 1.614 1.932 0.318 7.322 3/16 33
HHC1853 HHT1853 185-30 7.283 + 0 / -0.004 5 5/8 5.965 15 M16 x 80 M16 185 43424 50186 9.291 12.99 2.008 2.402 0.394 7.704 3/16 53
HHC1953 HHT1953 195-30 7.677 + 0 / -0.004 5 7/8 6.288 15 M16 x 80 M16 185 44744 52910 9.685 13.78 2.106 2.500 0.394 8.102 1/4 60
HHC2003 HHT2003 200-30 7.874 + 0 / -0.004 6 1/4 6.449 15 M16 x 80 M16 185 50233 54262 9.685 13.78 2.106 2.500 0.394 8.102 1/4 59
HHC2203 HHT2203 220-30 8.661 + 0 / -0.004 6 3/8 7.094 20 M16 x 90 M16 185 61729 77875 10.629 14.57 2.539 2.935 0.396 8.901 1/4 76
HHC2403 HHT2403 240-30 9.449 + 0 / -0.004 7 7.739 15 M20 x 100 M20 362 81259 100713 11.614 15.95 2.657 3.130 0.473 9.692 1/4 99
HHC2603 HHT2603 260-30 10.236 + 0 / -0.005 7 5/8 8.383 18 M20 x 110 M20 362 103867 131626 12.637 16.93 2.972 3.445 0.473 10.511 1/4 121
HHC2803 HHT2803 280-30 11.024 + 0 / -0.005 8 3/8 9.028 21 M20 x 120 M20 362 138411 166467 13.622 18.11 3.307 3.779 0.472 11.370 5/16 149
HHC3003 HHT3003 300-30 11.811 + 0 / -0.005 9 9.673 22 M20 x 120 M20 362 156895 187186 14.330 19.10 3.386 3.859 0.473 12.177 5/16 165
HHC3203 HHT3203 320-30 12.598 + 0 / -0.005 9 5/8 10.318 24 M20 x 120 M20 362 184479 213912 15.196 20.48 3.544 4.019 0.476 12.964 5/16 200
HHC3403 HHT3403 340-30 13.386 + 0 / -0.005 10 1/4 10.963 21 M24 x 130 M24 620 244665 288982 16.535 22.44 3.859 4.334 0.476 13.724 5/16 272
HHC3603 HHT3603 360-30 14.173 + 0 / -0.005 11 11.608 22 M24 x 140 M24 620 281430 321267 17.007 23.23 4.035 4.512 0.477 14.515 3/8 286
HHC3903 HHT3903 390-30 15.354 + 0 / -0.005 11 5/8 12.575 24 M24 x 140 M24 620 314475 381014 18.425 25.99 4.193 4.667 0.475 15.609 3/8 384
HHC4203 HHT4203 420-30 16.535 + 0 / -0.006 12 1/2 13.543 30 M24 x 160 M24 620 426421 516866 19.842 27.17 4.705 5.177 0.472 16.811 3/8 462
HHC4603 HHT4603 460-30 18.110 + 0 / -0.006 13 5/8 14.832 28 M27 x 170 M27 922 572280 701947 21.535 30.32 5.000 5.556 0.556 18.503 1/2 624
HHC5003 HHT5003 500-30 19.685 + 0 / -0.006 14 7/8 16.122 32 M27 x 180 M27 922 721680 874666 23.622 33.47 5.434 5.986 0.552 19.999 1/2 838
Single Taper Shrink Discs (SD40)
We also offer SD40 Single Taper Shrink Discs as an alternative to SD10, SD20 & SD30 Double Taper Shrink Discs.
The SD40 units have the following attributes:
• External locking device
• Simpler two piece design
• Integrated removal holes
• Provides extremely concentric and well-balanced mechanical interference ﬁt

POWER TRANSMISSION
The advantages of the SD40 over the SD10, SD20 and SD30 include:
• No torque wrench needed.* Simply tighten the screws in clockwise sequence, using
several passes, until the front faces of the flange and of the outer ring are aligned
• Save up to 80% of mounting time if using a powered tool
• High transmissible torque
• Aligning the two flanges (flush mounted) ensures concentricity, reducing
the need for dynamic balancing
Note: Dynamic fit pressures vary between Single Taper and Double Taper shrink discs,
as this is based on effective contact length. This should be taken into consideration.
* A torque wrench is recommended for best performance.
For assistance or more information on B-LOC Single Taper Shrink Discs, contact
Fenner Drives Applications Engineering group at AE@fennerdrives.com.
Shaft Sizes Maximum

B-LOC ®
(inch) Diametrical Shrink Disc
SD40
Clearance
Between Shaft
> ≤ and Hub Bore
1.18 1.97 0.0016
1.97 3.15 0.0019
3.15 4.72 0.0022
4.72 6.30 0.0026
6.30 7.09 0.0031
Metric hex head
7.09 9.84 0.0035
locking screws
ISO 4017 grade 12.9 9.84 12.40 0.0040
(See Ma for install 12.40 15.75 0.0044
torque.) 15.75 19.69 0.0048
19.69 22.05 0.0054
SD40 — Single Taper

SD bore Shaft Diameter Ma Mt
Hub OD Tolerance
(Hub OD) Range Locking Screws Max. Transmitted Torque
Install Ship
Part d TLd ds-MIN ds-MAX Torque ds-MIN ds-MAX A D L H e R wt
Qty Size
Number Size (inch) (inch) (inch) (inch) (ft lb) (ft lb) (ft lb) (inch) (inch) (inch) (inch) (inch) (inch) (lb)
H0504 50-40 1.969 +0.0010/-0.0020 1.496 1.654 8 M8 x 20 25 1180 1475 2.677 3.543 0.925 1.028 0.103 0.086 1.8
H0554 55-40 2.165 +0.0012/-0.0024 1.654 1.890 8 M8 x 20 25 1254 1844 2.835 3.937 1.024 1.142 0.118 0.090 2.4
H0604 60-40 2.362 +0.0012/-0.0024 1.890 2.047 9 M8 x 20 25 1696 2139 3.150 4.331 1.024 1.152 0.128 0.094 2.9
H0624 62-40 2.441 +0.0012/-0.0024 1.890 2.047 9 M8 x 20 25 1696 2139 3.150 4.331 1.024 1.152 0.128 0.096 2.9
H0684 68-40 2.677 +0.0012/-0.0024 1.969 2.362 9 M8 x 20 25 1770 2950 3.386 4.528 1.024 1.157 0.133 0.101 2.9
H0754 75-40 2.953 +0.0012/-0.0024 2.165 2.559 10 M10 x 25 52 2803 4426 3.937 5.433 1.063 1.209 0.146 0.106 5.1
H0804 80-40 3.150 +0.0012/-0.0024 2.362 2.756 10 M10 x 25 52 3172 4794 4.094 5.551 1.063 1.224 0.161 0.110 5.1
H0854 85-40 3.346 +0.0014/-0.0028 2.559 2.953 11 M10 x 25 52 4426 6343 4.488 6.102 1.339 1.504 0.165 0.114 7.1
H0904 90-40 3.543 +0.0014/-0.0028 2.559 2.953 11 M10 x 25 52 4426 6343 4.488 6.102 1.339 1.504 0.165 0.119 7.1
H0954 95-40 3.740 +0.0014/-0.0028 2.756 3.150 14 M10 x 25 52 5532 7819 4.882 6.693 1.535 1.711 0.176 0.123 9.5
H1004 100-40 3.937 +0.0014/-0.0028 2.756 3.150 14 M10 x 25 52 5532 7819 4.882 6.693 1.535 1.711 0.176 0.127 9.5
H1054 105-40 4.134 +0.0014/-0.0028 3.150 3.543 12 M12 x 35 89 9441 12539 5.354 7.283 1.713 1.933 0.220 0.131 13
H1104 110-40 4.331 +0.0014/-0.0028 3.150 3.543 12 M12 x 35 89 9441 12539 5.354 7.283 1.713 1.933 0.220 0.135 13
H1154 115-40 4.528 +0.0014/-0.0028 3.346 3.740 14 M12 x 35 89 10105 13424 5.787 7.756 1.890 2.087 0.197 0.139 16
H1204 120-40 4.724 +0.0014/-0.0028 3.346 3.740 14 M12 x 35 89 10105 13424 5.787 7.756 1.890 2.087 0.197 0.143 15
H1254 125-40 4.921 +0.0017/-0.0033 3.543 3.937 14 M12 x 35 89 12244 15858 6.220 8.465 1.890 2.102 0.212 0.147 19
H1304 130-40 5.118 +0.0017/-0.0033 3.740 4.331 12 M14 x 40 140 15121 21759 6.496 9.055 2.008 2.264 0.256 0.151 24
H1354 135-40 5.315 +0.0017/-0.0033 3.740 4.331 12 M14 x 40 140 15121 21759 6.496 9.055 2.008 2.264 0.256 0.155 24
H1404 140-40 5.512 +0.0017/-0.0033 3.937 4.528 12 M14 x 40 140 17334 23972 6.772 9.055 2.008 2.276 0.268 0.159 23
H1504 150-40 5.906 +0.0017/-0.0033 4.331 4.921 14 M14 x 40 140 23234 31717 7.323 10.354 2.165 2.449 0.284 0.167 34
H1554 155-40 6.102 +0.0017/-0.0033 4.331 4.921 14 M14 x 40 140 23234 31717 7.323 10.354 2.165 2.449 0.284 0.171 34
H1604 160-40 6.299 +0.0017/-0.0033 4.724 5.315 12 M16 x 45 214 33192 43518 7.795 11.417 2.402 2.693 0.291 0.176 49
H1654 165-40 6.496 +0.0017/-0.0033 4.724 5.315 12 M16 x 50 214 33192 43518 7.795 11.417 2.402 2.693 0.291 0.180 47
POWER TRANSMISSION
H1704 170-40 6.693 +0.0017/-0.0033 5.118 5.709 14 M16 x 50 214 40568 52370 8.189 11.811 2.402 2.713 0.311 0.184 51
H1754 175-40 6.890 +0.0017/-0.0033 5.118 5.709 14 M16 x 50 214 40568 52370 8.189 11.811 2.402 2.713 0.311 0.188 50
H1804 180-40 7.087 +0.0017/-0.0033 5.512 6.102 16 M16 x 50 214 59746 74498 8.740 12.598 3.051 3.346 0.295 0.192 74
H1854 185-40 7.283 +0.0020/-0.0038 5.512 6.102 16 M16 x 50 214 59746 74498 8.740 12.598 3.051 3.346 0.295 0.196 72
H1904 190-40 7.480 +0.0020/-0.0038 5.906 6.496 16 M16 x 50 214 71547 88512 9.370 13.386 3.051 3.453 0.402 0.200 84
H1954 195-40 7.677 +0.0020/-0.0038 5.906 6.496 16 M16 x 50 214 71547 88512 9.370 13.386 3.051 3.453 0.402 0.204 82
H2004 200-40 7.874 +0.0020/-0.0038 5.906 6.496 16 M16 x 50 214 71547 88512 9.370 13.386 3.051 3.453 0.402 0.208 80
H2204 220-40 8.661 +0.0020/-0.0038 6.299 7.087 15 M20 x 60 420 95888 125392 10.551 14.567 3.799 4.234 0.435 0.224 117
H2404 240-40 9.449 +0.0020/-0.0038 6.693 7.874 16 M20 x 60 420 112115 161534 11.339 15.945 3.858 4.374 0.516 0.241 146
H2604 260-40 10.236 +0.0022/-0.0043 7.480 8.661 16 M20 x 60 420 158584 221280 12.283 16.929 4.350 4.933 0.583 0.257 181
H2804 280-40 11.024 +0.0022/-0.0043 8.268 9.449 18 M20 x 60 420 208003 280288 13.150 18.110 4.764 5.512 0.748 0.273 227
H3004 300-40 11.811 +0.0022/-0.0043 8.661 9.843 16 M24 x 70 730 269224 359211 14.173 19.094 4.882 5.504 0.622 0.290 265
H3204 320-40 12.598 +0.0024/-0.0047 9.449 10.630 18 M24 x 70 730 327494 427808 14.961 20.472 4.882 5.575 0.693 0.306 304
H3404 340-40 13.386 +0.0024/-0.0047 9.843 11.024 18 M24 x 70 730 395354 511157 15.827 22.441 5.472 6.236 0.764 0.322 417
H3604 360-40 14.173 +0.0024/-0.0047 10.630 11.417 20 M24 x 70 730 506731 612208 16.693 23.228 5.630 6.417 0.787 0.339 456
H3904 390-40 15.354 +0.0024/-0.0047 11.417 12.598 18 M27 x 70 1092 633598 787757 17.874 25.591 5.827 6.661 0.834 0.363 549
H4204 420-40 16.535 +0.0027/-0.0052 12.598 13.780 20 M27 x 70 1092 785544 959618 19.134 26.378 6.535 7.323 0.788 0.387 628
H4404 440-40 17.323 +0.0027/-0.0052 13.386 14.567 21 M27 x 70 1092 983221 1184586 19.921 29.134 6.772 7.634 0.862 0.404 866
H4604 460-40 18.110 +0.0027/-0.0052 14.173 15.354 21 M27 x 70 1092 1130003 1346858 21.024 30.315 7.008 7.992 0.984 0.420 924
H4704 470-40 18.504 +0.0027/-0.0052 14.567 15.748 21 M27 x 70 1092 811360 1032640 21.181 27.756 7.874 8.646 0.772 0.428 750
H4804 480-40 18.898 +0.0027/-0.0052 14.961 16.142 21 M30 x 100 1460 1343907 1586578 21.732 31.496 8.228 9.161 0.933 0.436 1085
H5004 500-40 19.685 +0.0027/-0.0052 15.748 16.929 24 M30 x 100 1460 1530520 1793843 23.937 33.465 7.795 8.685 0.890 0.453 1250
H5304 530-40 20.866 +0.0030/-0.0057 16.929 18.110 24 M30 x 100 1460 1548960 1792368 23.937 33.465 8.504 9.539 1.035 0.477 1162
H5604 560-40 22.047 +0.0030/-0.0057 17.717 18.898 24 M30 x 100 1460 2064542 2377285 24.882 37.008 8.661 9.630 0.969 0.502 1711
H5904 590-40 23.228 +0.0030/-0.0057 18.504 19.685 28 M30 x 100 1460 2408264 2755674 26.142 37.795 9.291 10.260 0.969 0.526 1841
H6204 620-40 24.409 +0.0030/-0.0057 19.685 21.260 28 M30 x 100 1460 2760099 3267568 27.795 38.189 10.197 11.378 1.181 0.550 2346
ENGINEERING DATA – B-LOC SHRINK DISCS
DESIGN FEATURES TORQUE AND THRUST COMBINED

External locking devices for keyless frictional shaft/hub connections Simultaneous transmission of torque and thrust requires calculating
on shafts from 5/8" to 40" diameter, B-LOC® Shrink Discs… a resultant torque:
• Provide a high capacity interference fit with all the positive Mtres =
(
T2 + F × d
)
2
features of conventional interference fits, but without their 2

assembly and disassembly problems.
where: T = peak drive torque
• Offer extremely concentric and well-balanced connections,
F = peak thrust load
ideal for high-speed applications.
d = shaft diameter
• Permit simple axial positioning and angular timing.
Select a unit where Mt ≥ Mtres
• Are available in standard, light, and heavy-duty series to
suit any application. BENDING MOMENTS
Shrink discs will generally transmit a continuous bending moment
WORKING PRINCIPLE equal to 25% of rated torque capacity Mt.
Ma
B-LOC Shrink Discs provide (Installation
a high-ratio conversion of Torque) RELEASABILITY
screw clamp loads into radial Since the tapers of a B-LOC Shrink
contact pressures when the Disc are self-releasing and stresses from
tapered collars are pulled radial contractions of the hub are well
together by tightening of within elastic limits, loosening the
the integrated high-strength Radial Force
locking screws results in hub expansion
locking screws. These radial towards Hub and Shaft back to its original dimensions, thereby restoring fit clearance for
contact pressures in turn simple disassembly. The SD40 is manufactured with self-releasing
accomplish the following: tapers, however, it is possible the outer ring may need disengaging
from the inner ring. This can be easily done by loosening the bolts
1. Contract the inner ring and hub in sequence, transferring the appropriate number of bolts over to the
to close the clearance between shaft threaded back-off holes in the face of the shrink disc and progressively
and hub bore. tightening these bolts until the shrink disc becomes loose. The hub
2. Generate a defined shaft/hub and shaft will return to their original fit clearances.
contact pressure for a high capacity
mechanical interference fit.
MATERIAL
Shrink disc inner rings are manufactured from high-carbon steel.
This frictional bond transmits torque, bending and/or thrust loads Outer rings are made from forged and heat treated alloy steel.
directly from the hub to the shaft; the shrink disc itself does not carry
any torque or thrust load. LUBRICANTS
Shrink discs are supplied with Molybdenum Disulphide based
TORQUE lubricant applied to the tapers and to the locking screw threads
POWER TRANSMISSION
Mt = rated torque capacity of one B-LOC Shrink Disc and head contact areas.
with all screws tightened to specified torque Ma as listed
in specifications, based on a coefficient of friction µ = 0.15 SHAFT AND HUB MATERIAL
and specified tolerances and clearances. Torque capacities Listed specifications assume shaft and hub material with a yield
for Half Shrink Discs = Mt point of at least 45 ksi (310 N/mm2). Cast iron hubs are well suited
2 for compressive stresses exerted by B-LOC Shrink Discs. However,
a lower torsional hub strength generally requires the selection of a
• Torque capacities for connections using shaft diameters between shrink disc at least one size larger than listed if full torque (i.e., that
the minimum and maximum sizes listed can be approximated applicable to a steel hub) is to be transmitted.
through interpolation.
LENGTH OF FIT
• Transmissible torque decreases if tolerances and/or clearances
The most recent research on length of fit for a
are larger than specified; or if hollow shafts with bores exceeding
shrink disc connection* indicates that the hub
approximately 35% of shaft diameter are used.
bore-to-shaft interface should be relieved using a
THRUST non-toleranced clearance except for that portion
Th = transmissible thrust, determined by using the following directly under the shrink disc inner ring, for a fit
equation: length equal to “L” for a standard shrink disc (see
illustration at right). This approach eliminates
Th = 2 × Mt fretting corrosion between shaft and hub which
d can make the separation of components difficult.
where: d = shaft diameter *(see Casper, Thomas: Reibkorrosionsverhalten von
Mt = rated torque capacity Spanelementverbindungen - Aachen: Mainz, 1999)
LOCATING AGAINST HUB FACE

In applications subjected to reversing bending
moments, we recommend the configuration at
right which requires a hub undercut where
R ≥ e for smooth transition.
H
TOLERANCE (TL) e B-LOC®

.006" for shafts over 1"
d = Shaft diameter machined to

WK
SERIES
d+0/-TL
D A d d1
Metric hex head locking

screws grade 10.9. (See
Ma for install torque.) L
WK Couplings can be manufactured to
Shaft engagement equal accommodate different shaft diameters;
for both ends with gap not this can also be accomplished using an
exceeding 5% of shaft diameter. adaptor sleeve.
WK Series
Ma Mt
Locking Maximum
Screws Install Transmissible
Part d D H L e d1 A Ship
Type Torque Torque wt
Number (in) (in) (in) (in) (in) (in) (in) Qty Size (ft lb) (ft lb) (lb)
HWK0152010 WK 15 5/8 2.047 1.339 1.181 0.079 0.827 1.378 3 M6 x 30 8.7 132 0.9
HWK0152011 11/16 145 0.9
HWK0152012 3/4 158 0.9
HWK0202013 WK 20 13/16 2.362 1.575 1.339 0.118 1.024 1.614 5 M6 x 35 8.7 286 1.4
HWK0202014 7/8 308 1.3
HWK0202015 15/16 330 1.3
HWK0252100 WK 25 1 2.598 1.732 1.496 0.118 1.260 1.890 7 M6 x 35 8.7 492 1.8
HWK0252101 1 1/16 523 1.8
HWK0252102 1 1/8 554 1.7
HWK0302103 WK 30 1 3/16 2.992 1.890 1.654 0.118 1.496 2.126 8 M6 x 40 8.7 668 2.7
HWK0302104 1 1/4 703 2.7
HWK0302106 1 3/8 774 2.6
HWK0402107 WK 40 1 7/16 3.780 2.205 1.969 0.118 1.850 2.638 7 M8 x 45 22 1371 5
HWK0402108 1 1/2 1430 5
HWK0402110 1 5/8 1550 5
HWK0402111 1 11/16 1609 5
HWK0402112 1 3/4 1669 5
HWK0502114 WK 50 1 7/8 4.409 2.676 2.362 0.157 2.283 3.150 10 M8 x 50 22 2554 8
POWER TRANSMISSION
HWK0502115 1 15/16 2639 8
HWK0502200 2 2724 8
HWK0502202 2 1/8 2895 8
HWK0602203 WK 60 2 3/16 4.724 3.071 2.756 0.157 2.598 3.504 12 M8 x 55 22 3576 10
HWK0602204 2 1/4 3678 10
HWK0602206 2 3/8 3882 10
HWK0602207 2 7/16 3984 10
HWK0602208 2 1/2 4087 9
HWK0702209 WK 70 2 9/16 5.826 3.464 3.150 0.157 3.110 4.173 12 M10 x 65 44 6642 19
HWK0702210 2 5/8 6804 19
HWK0702211 2 11/16 6966 18
HWK0702212 2 3/4 7128 18
HWK0702214 2 7/8 7452 17
HWK0802215 WK 80 2 15/16 6.693 4.095 3.701 0.197 3.701 4.961 10 M12 x 80 74 9128 28
HWK0802300 3 9323 28
HWK0802302 3 1/8 9711 27
HWK0802304 3 1/4 10099 26
HWK0802306 3 3/8 10488 26
HWK0902307 WK 90 3 7/16 7.283 4.567 4.173 0.197 4.094 5.433 12 M12 x 80 74 12819 36
HWK0902308 3 1/2 13052 36
HWK0902310 3 5/8 13518 35
HWK0902312 3 3/4 13984 34
HWK0902314 3 7/8 14450 34
HWK1002315 WK 100 3 15/16 7.756 4.960 4.488 0.236 4.488 5.866 15 M12 x 90 74 18354 43
HWK1002400 4 18645 43
HWK1002404 4 1/4 19810 42
If your application requires increased torque transmission and/or thrust, solvent clean the interface between the bore of the WK unit and the shaft to produce an oil free connection.
This in turn will result in up to a 20% increase in Mt and Th performance values. Contact Fenner Drives Applications Engineering for additional details at AE@fennerdrives.com.
ENGINEERING DATA – B-LOC WK RIGID COUPLINGS
DESIGN FEATURES TORQUE AND THRUST COMBINED

External keyless locking devices that simultaneously transmit high Simultaneous transmission of torque and thrust requires calculating
torques and bending moments that allow your drive to be overhung a resultant torque:
shaft mounted. where: T = peak drive torque
• Keyless, rigid, zero backlash coupling.
Mtres =
(
T2 + F × d 2
2 ) F = peak thrust load
d = shaft diameter
• Transmits high torque and bending moments. Select a unit where Mt ≥ Mtres
• Eliminates the need for costly mounting brackets and
structural support. BENDING MOMENTS
WK Couplings will generally transmit a continuous bending moment
• Compact, double taper design with self-releasing tapers equal to 25% of rated torque capacity Mt.
for easy removal.
• Exceptional concentricity. RELEASABILITY
Since the tapers of a B-LOC WK Coupling are self-releasing,
• Installs right over existing keyways and splines. loosening the locking screws results in releasing the shafts from the
• Not affected by shock or reversing loads. coupling. Care needs to be used by loosening each screw gradually
such that the screw tension remains relatively equal on all screws.
WORKING PRINCIPLE
Drawing the two tapered collars together with the integrated MATERIAL
tightening screws, generates Ma WK Coupling inner rings are manufactured from high-carbon steel.
radial forces that squeeze the
(Installation Torque)
Outer rings are made from forged and heat treated alloy steel.
inner ring tightly to the two
shafts. The inner ring acts as LUBRICANTS
a press fit sleeve, transmitting WK Couplings are supplied with molybdenum disulphide based
torque, thrust, and even lubricant applied to the tapers and to the locking screw threads
bending loads from one shaft and head contact areas. The bore of WK Couplings are supplied
to the other. Radial Force towards each Shaft
lightly oiled and should only be used with oil supplied on the unit.
TORQUE SHAFT AND HUB MATERIAL

Mt = rated torque capacity of one B-LOC® WK Coupling Listed specifications assume shaft material with a yield point of
with all screws tightened to specified torque Ma as listed at least 45 ksi (310 N/mm2).
in specifications.
LENGTH OF FIT
THRUST Shaft engagement inside the WK Coupling must be equal for both
Th = transmissible thrust, determined by using the following shafts and the gap between the shafts should not exceed 5% of the
equation: shaft diameter.
Th = 2 × Mt where: d = shaft diameter

POWER TRANSMISSION
d Mt = rated torque capacity
SUPPORT SHAFT
MOUNTED MOUNTED
(flexible coupling) (WK Coupling)
Requires bulky frame work and supports Shaft mount completely eliminates shaft misalignment and frame work
Shaft misalignment issues necessitate the use of flexible couplings Simple torque arm prevents motor rotation
Fretted and corroded flexible couplings complicate disassembly Keyless mechanical shrink fit never corrodes to the shaft and disassembles easily
Higher total cost Compact design allows for smaller drive footprint
Lower overall cost
ENGINEERING DATA – B-LOC WK RIGID COUPLINGS
Plan View
CALCULATIONS DESIGN TIPS
Once you have selected your WK Rigid Coupling, apply the following calculations • For any WK Coupling design or engineering
to verify that it is suitable for your application. Please reference Plan View above. questions, contact a Fenner Drives
Applications Engineer at AE@fennerdrives.com.
®
1. Mt = published max rated torque capacity of B-LOC WK Rigid Coupling = ______ ft-lb
• Shaft mounting creates bending moments
in the system; coupling, shafts, bearings etc.,
2. MDMAX = maximum drive torque (stall torque where applicable) = ______ ft-lb must be designed to handle these bending
moments.
3. W = weight of the overhung shaft mounted drive = ______ lb
• Torque arm design and placement can be
POWER TRANSMISSION
used to counteract or minimize bending
4. R = length of the torque arm = ______ ft moments in the system.
5. FTA = torque arm reaction force = MDMAX ÷ R = ______ lb • Torque arm and arm stop(s) must be
adequately designed to handle the forces
generated by the motor.
6. MB = bending moment at the coupling
NOTE: MB must be <0.25 × Mt • To achieve up to a 20% increase in coupling
load capacity, using a non-petroleum based
TORQUE ARM OPTIONS
solvent, clean the shafts and coupling bore
Straight Torque Arm to produce a completely lubricant free
MB = (W × X1) + (FTA × X2) = ______ ft-lb interface.
Bent Torque Arm • WK Couplings can typically join shafts of

MB = (W × X1) + (FTA × X3) = ______ ft-lb different sizes up to a ratio of 2:1. For shaft
ratios greater than this, please contact a
Double Torque Arm Fenner Drives Applications Engineer.
MB = (W × X1) = ______ ft-lb
• WK Couplings are not recommended for
applications in which motor and driven
7. MtB = resultant (torque & bending) = (MDMAX)2 + (2 × MB)2 = ______ ft-lb component are rigidly mounted.
NOTE: MtB must be <Mt
8. If the NOTES in steps 6 and 7 are both satisfied, the B-LOC WK Rigid Coupling
is recommended for your application.
The calculations on this page assume worst case placement of torque arm.
To optimize design contact a Fenner Drives Applications Engineer at AE@fennerdrives.com.
POWERMAX PULLEYS & IDLERS
The PowerMax Advantage

Fenner Drives is the industry leader in molded composite solutions for industrial
power transmission and material handling applications. PowerMax Composite
products are used where dependability counts most.
• High-strength glass reinforced composite idlers and pulleys are available

in a wide range of sizes for flat, round and V-belts.
• Our composite products are a lightweight, corrosion resistant alternative

to steel, aluminum and cast iron.
Need a custom solution?

With industry leading engineering, Fenner Drives will design the best product
for your application.
• In-house modular tooling capabilities allow us to economically build tooling

and cut weeks off order lead time.
• Engineered composite material allows for design flexibility by consolidating

multiple pieces into one unit.
• We offer a range of engineered composite material to best fit your

application requirements.
PowerMax V-Belt Iders used with PowerTwist Wood panel conveyor using PowerMax
Roller Drive on a Live Roller Conveyor. Round Idlers and Eagle Red 90 belting.
PowerMax DriveN Pulley on a Centrifugal Fan.
V Belt Idlers
Dimensions (inches)
Part Number Type Grooves A B C D E Belt Size Bearing Type Bore Sizes
VA3001 1 1 3 2 0.5 0.7 0.81 A 6203-2RS 17mm

VA3002 1 1 3.1 1.84 0.63 0.78 0.81 B 6203-2RS 17mm
VA4001 1 1 3.98 2.99 0.5 0.7 0.81 A 6203-2RS 17mm
VA4002 1 1 4 2.84 0.64 0.86 0.81 B 6203-2RS 17mm
VA5001 1 1 5.04 3.84 0.65 0.8 0.82 B 6203-2RS 17mm
VA6001 1 1 6.03 5.12 0.5 0.72 0.81 A 6203-2RS 17mm
VA6250+ 1 1 6.25 5 0.61 0.95 0.72 A/B 6203-2RS 17mm
VA7501 1 1 7.5 6.6 0.54 0.72 0.75 A 6203-2RS 17mm
V2B6280 2 2 6.28 5.18 0.64 1.72 1.85 B/5V 6203-2RS .510/.520
V3B6280 2 3 6.28 5.18 0.64 2.44 2.58 B/5V 6203-2RS .510/.520
V4B6280 2 4 6.28 5.18 0.64 3.16 3.33 B/5V 6203-2RS .510/.520
V Belt Idler
Single Flange Belt Idlers

Dimensions (inches)
Part Number A B C D E Belt Size Bearing Type Bore Sizes
VA3600 3.6 2.84 0.59 0.84 0.8 B 6203-2RS 17mm

VA4130 4.13 3.23 0.58 0.86 0.81 B 6203-2RS 17mm
Flat Belt Idlers

Dimensions (inches)
Part Number Type Crown A B C D E Belt Size Bearing Type Bore Size
FA2001† 1 Yes 2.07 1.88 1.37 1.54 0.47 1 1/8" 6203-2RS 17mm
FA2002† 1 Yes 2.35 1.99 0.98 1.15 0.47 7/8" 6203-2RS 17mm
FA2003 1 No 2.76 1.94 0.82 1.15 0.75 5/8" 6203-2RS 17mm
FA2009*† 1 No — 2 — 1 0.47 13/16" 6203-2RS 17mm
Single Flange Idler FA2010*† 1 No — 1.98 — 0.75 0.47 5/8" 6203-2DD 17mm
FA2501† 1 No 2.48 1.97 1.55 1.85 0.72 11/4" 6203-2RS 17mm
FA2700*† 1 No — 2.71 — 1.05 0.67 7/8" 6203-2RS 17mm
FA2750† 1 Yes 2.75 1.97 1.09 1.4 0.67 29/32" 6203-2RS 17mm
FA2751 1 Yes 2.75 2.52 1 1.22 0.8 13/16" 6203-2RS 17mm
FA2900* 1 Yes — 2.91 — 1.22 0.76 1" 6203-2RS 17mm
FA3002 1 Yes 3 2.5 1.02 1.31 0.76 7/8" 6203-2RS 17mm
FA3003* 1 No — 2.96 — 1.09 0.76 29/32" 6203-2RS 17mm
FA3250*† 1 No — 3.2 — 1.01 0.67 13/16" 6203-2DD 17mm
FA3251† 1 Yes 3.24 2.97 1.04 1.2 0.67 7/8" 6203-2DD 17mm
FA3301† 1 Yes 3.38 2.97 1.38 1.67 0.78 11/8" 6203-2RS 17mm
FA3501 1 Yes 3.5 3 0.77 1.09 0.76 5/8" 6203-2RS 17mm
FA3502 1 Yes 3.5 3 1 1.22 0.76 13/16" 6203-2RS 17mm
FA3504 1 Yes 3.48 2.98 0.69 0.9 0.76 1/2" 6203-2RS 17mm
FA3750† 1 Yes 3.75 2.96 1.09 1.38 0.67 29/32" 6203-2RS 17mm
FA3751† 1 Yes 3.8 3.25 1.03 1.24 0.67 7/8" 6203-2RS 17mm
FA4501 1 Yes 4.5 4 1.09 1.39 0.76 29/32" 6203-2RS 17mm
FA4502* 1 No — 4.5 — 1.21 0.82 1" 6203-2RS 17mm
FA4750† 1 Yes 4.75 3.96 1.09 1.38 0.67 29/32" 6203-2RS 17mm
FA5501† 1 Yes 5.56 5.03 1.02 1.29 0.72 7/8" 6203-2RS 17mm
FX0001‡ 1 Yes 2.75 2.37 1.07 1.39 — 29/32" 6205-2RS 1"
Flat Belt Idler FX0002*‡ 1 Yes — 2.33 — 1.39 — 11/8" 6205-2RS 1"
F1B6280 2 No 6.28 6 1.22 1.63 1.63 1" 6203-2RS .510/.520
F2B6280 2 No 6.28 6 2.1 2.5 2.5 2" 6203-2RS .510/.520
F3B6280 2 No 6.28 6 2.91 3.31 3.31 2 3/4" 6203-2RS .510/.520
F4B6280 2 No 6.28 6 3.85 4.25 4.25 3 3/4" 6203-2RS .510/.520
* Many idlers are, or can be, made into a driven pulley with a 5/8" or 3/4" bore.
Please contact Fenner Drives for minimum order quantities, pricing, and availability.
PowerMax™ Round Belt Idlers

Dimensions (inches)
Maximum
Part Number A B C D E Radius Belt Size Bearing Type Bore Sizes
RA3001 3.05 2.45 0.4 0.61 0.81 0.19 3/8" 6203-2RS 17mm
RA3002 3.05 2.45 0.42 0.61 0.63 0.21 13/32" 6203-2RS 17mm
RA3501 3.5 2.75 0.53 0.76 0.76 0.26 1/2" 6203-2RS 17mm
RA3502 3.5 2.75 0.44 0.76 0.76 0.19 3/8" 6203-2RS 17mm
RA4101 4.12 3.5 0.53 0.68 0.72 0.26 1/2" 6203-2RS 17mm
RA4801 4.8 4 0.53 1 0.77 0.28 1/2" 6203-2RS 17mm
RA4802 4.82 4 0.73 1.06 0.77 0.36 11/16" 6203-2RS 17mm
RA5502† 5.5 4.62 0.38 0.56 0.7 0.19 3/8" 6203-2RS 17mm
SMALL SERIES
RA1850† 1.84 1.39 0.4 0.63 0.63 0.16 5/16" 6902-2RS 15mm
RA2540 2.54 1.9 0.44 0.63 0.63 0.16 5/16" 6902-2RS 15mm
Round Belt Idler
PowerMax Cable Pulleys

Dimensions (inches)
Maximum
Part Number A B C D E Cable Size Bore Size
RA2701 2.75 2.43 0.23 0.54 0.82 5/32" 17mm
RA3503† 3.55 2.73 0.39 0.8 0.77 1/4" 17mm
RA3504 3.5 2.81 0.31 0.65 0.77 7/32" 17mm
RA4501† 4.46 3.74 0.38 0.86 0.77 1/4" 17mm
RA4502† 4.46 3.74 0.38 0.86 0.77 3/16" 17mm
RA5001 5 4.31 0.31 0.65 0.73 3/16" 17mm
RA5501† 5.5 4.86 0.22 0.53 0.6 5/32" 17mm
RA6001 6 5.2 0.4 0.8 0.8 1/4" 17mm
† Insertion molded bearing.
* Many idlers are, or can be, made into a driven pulley with a 5/8" or 3/4" bore.
Please contact Fenner Drives for minimum order quantities, pricing, and availability.
Cable Pulley
PowerMax Sprockets
Dimensions (inches)
Nominal O.D. Pitch
Part Number Chain # # Teeth (in) Diameter (in) A B C Bearing Type Bore Size
CS3502 35 19 2.48 2.28 0.67 1.78 0.164 6203-2RS 17mm

CS4002 40 17 2.98 2.72 0.67 1.78 0.279 6203-2RS 17mm
CS4003 40 17 2.98 2.72 0.67 1.78 0.279 6203-2RS-10 5/8"
CS4006 40 17 2.98 2.72 0.67 1.78 0.279 6203-2RS-12 3/4"
CS5002 50 15 3.34 3.01 0.67 1.78 0.343 6203-2RS 17mm
CS5004 50 15 3.34 3.01 0.67 1.78 0.343 6203-2RS-10 5/8"
CS5005 50 15 3.34 3.01 0.67 1.78 0.343 6203-2RS-12 3/4"
CS6002 60 13 3.52 3.14 0.67 1.78 0.449 6203-2RS 17mm
CS6003 60 13 3.52 3.14 0.67 1.78 0.449 6203-2RS-10 5/8"

CS6004 60 13 3.52 3.14 0.67 1.78 0.449 6203-2RS-12 3/4"
Sprocket CS8002 80 12 4.39 3.86 0.67 1.78 0.58 6203-2RS 17mm

CS8003 80 12 4.39 3.86 0.67 1.78 0.58 6203-2RS-10 5/8"
CS8004 80 12 4.39 3.86 0.67 1.78 0.58 6203-2RS-12 3/4"
PowerMax™ Carriage Rollers

Dimensions (inches)
Part Number Type A B C D Radius Bore Sizes
RA2001 1 1.36 1.2 1.95 1.37 0.53" 3/8"

RA2002 1 1.36 1.2 1.95 1.37 0.53" 1/2"
RA2004 1 1.48 1.2 1.95 1.37 0.53" 1/2"
RX0219 2 1.48 1.2 1.95 1.38 0.53" 3/8"
Type 1 Type 2
PowerMax Mounting Adapters
Bore Reducing Adapters Clevis Adapters Shoulder Adapters

Dimensions (inches) Dimensions (inches) Dimensions (inches)
Part Number A W Part Number A B W C Part Number A B W C
RB0001 .385 / .395 0.472 CB0001 .385 / .395 0.26 0.472 0.5 SB0001 .385 / .395 0.26 0.472 0.5
RB0002 .510 / .520 0.472 CB0002 .385 / .395 0.51 0.472 0.75 SB0002 .385 / .395 0.51 0.472 0.75
RB0071 .474 / .486 0.472 CB0003 .385 / .395 0.76 0.472 1 SB0003 .385 / .395 0.76 0.472 1
CB0004 .510 / .520 0.26 0.472 0.5 SB0004 .510 / .520 0.26 0.472 0.5
CB0005 .510 / .520 0.51 0.472 0.75 SB0005 .510 / .520 0.51 0.472 0.75
CB0006 .510 / .520 0.76 0.472 1 SB0006 .510 / .520 0.76 0.472 1
CB0013 .385 / .395 0.08 0.472 0.32 SB0013 .385 / .395 0.15 0.472 0.38
CB0015 .314 / .324 0.08 0.472 0.32 SB0018 .385 / .395 0.4 0.472 0.64
CB0016 .385 / .395 0.17 0.472 0.41 SB0020 .385 / .395 0.59 0.472 0.83
CB0020 .314 / .324 0.1 0.472 0.34 SB0032 .385 / .395 0.56 0.472 0.8
CB0023 .394 / .399 0.64 0.472 0.87 SB0052 .385 / .395 0.71 0.472 0.95
CB0036 .385 / .395 0.7 0.472 0.94 SB0033 .385 / .395 0.95 0.472 1.19
CB0058 .385 / .395 0.33 0.472 0.57 SB0090 .255 / .265 0.31 0.472 0.55
CB0100 .397 / .407 0.26 0.472 0.5
PowerMax DriveN Pulleys

Dimensions (inches) Diameter (inches)
Part Number Spoke
Number Type E F H L Belt Size Outside Datum Spokes Style
AFD44 1 0.79 0.74 2.17 1.53 A/4L 4.25 4 – –

AFD49 1 0.79 0.74 2.17 1.53 A/4L 4.75 4.5 4 I-Beam
AFD59 1 0.79 0.74 2.17 1.53 A/4L 5.75 5.5 4 I-Beam
AFD74 1 0.79 0.74 2.17 1.53 A/4L 7.25 7 4 I-Beam
AFD84 2 0.76 0.75 2.22 1.6 A/4L 8.25 8 6 Cross

AFD94 2 0.76 0.75 2.22 1.6 A/4L 9.25 9 6 Cross
AFD104 2 0.76 0.75 2.22 1.6 A/4L 10.25 10 6 Cross
AFD112 2 0.76 0.75 2.22 1.6 A/4L 10.98 10.73 6 Cross
AFD124 2 0.75 0.75 2.22 1.6 A/4L 12.25 12 6 I-Beam
Shaft Size Keyseat
5/8", 3/4" 3/16" x 3/32"

1" 1/4" x 1/8"
Type 1 Type 2
ENGINEERING DATA & MATERIAL PROPERTIES – PULLEYS & IDLERS
Engineering Data
Almost all PowerMax Pulleys use precision 6203-2RS chrome-alloy steel radial ball bearings (exceptions are noted). These bearings meet all
ABEC-1 standards. Our bearings utilize two rubber wiping seals to keep the grease in and contaminants out. See chart for standard load ratings.
Bearing Properties 6203 Radial Load Ratings
Type 6203-2RS Speed (RPM) 33 100 200 300 500 1000 1500 1800 2500 3600 5000
Seals Rubber Wiping Load (lbs) 2141 1480 1175 1026 866 687 601 565 507 449 402
Fit ABEC–1 “C4” Internal Clearance Load (N) 9523 6583 5226 4566 3852 3058 2672 2514 2254 1996 1789
Lubrication Chevron SRI #2 or equivalent (30% ± 5% Fill) Load Ratings based on 500 HR minimum L10 life.
Service Temperature -20° – 350°F (-30° – 180°C)
Basic Dynamic Load 2150 lbs. (9563N)
Bearings are also available in stainless steel, with trash seals and shields.
Bearing Life
How long a bearing will last in an application depends on two variables: first, the bearing’s physical
properties (material, design, method of manufacture); and second, the conditions of operation (load, • Revolutions: L10 = C
( )  10
3 6
P
speed, temperature, lubrication). Although it is not possible to predict the exact life of a bearing, the
designer can calculate the “L10 Life” of a bearing. L10 is the life, in hours or revolutions, that 90% of
a group of bearings will complete or exceed. The equations for calculating L10 life are:
( )  16667
• Hours: L10 = C 3
P N
• Where:
L10 = Rating Life
C = Basic Dynamic Capacity
P = Radial Load in lbs.
N = Speed in RPM
Material Properties
Fenner Drives uses engineering composites, which ensure the highest level of performance and
consistent strength. Our standard material is 33% glass reinforced nylon 6/6. The combination
of high strength, temperature resistance and abrasion resistance makes nylon a versatile
engineering thermoplastic.
33% GLASS-REINFORCED NYLON 6/6, dry as molded
PROPERTY ASTM CODE VALUE
Tensile Strength at Break D638 20,000 psi
Flexural Modulus D790 1,300,000 psi
Heat Deflection Temp @ 264 psi D648 480°F (249°C)
32° to 225°F
Continuous Service Temp. (Min. – Max.) N/A
(0° to 107°C)
1.3 to 1.8 ft.-lb/in.

Izod Impact Strength (notched 1/8") D256

of notch
Data listed was generated using molded specimens tested under standard conditions. Many of the
mechanical properties can be influenced by processing conditions, environmental factors and the
application of stress. Therefore, this data characterizes typical production material, and should not
be used either to establish specification limits or alone as the basis for engineering design.
FENNER DRIVES
|
PRODUCT CATALOG
|
2015 – 2016
Count on Fenner Drives. We’ve got the right product for your application.
With over 100 years of manufacturing, technical and commercial expertise, Fenner Drives is a global leader in value-adding, problem-solving
products for conveying and power transmission applications. Recognized widely for our expertise and innovation, we blend reliability, quality
and value in our products while providing unsurpassed technical support and service.
Visit us at www.fennerdrives.com
www.fennerdrives.com
US and Canada • 1 800 243 3374 Information subject to change
Latin America (except Brazil) • 1 717 665 2421 without prior notification. Visit
Europe, Asia, Australia, Africa and Brazil • +44 0 870 757 7007 www.fennerdrives.com/catalogs
for the most current information.
© 2015 FENNER DRIVES FDPC-001

FDPC PDF

Uploaded by

Copyright:

Available Formats

FDPC PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FDPC PDF

Uploaded by

Copyright:

Available Formats

PRODUCT CATALOG 2015 – 2016

THE POWER OF ONE

All over the world, the engineering community turns to Fenner Drives

Fenner Drives is a division of Fenner PLC. With over 5,500 employees

POWER TRANSMISSION SOLUTIONS . . . . . . . . . . . 37

POWERMAX PULLEYS & IDLERS . . . . . . . . . . . . . . . 90

Tango and PowerTwist Specialty Link Belts

• Unaffected by extremes of temperature, water, oils, grease and

• Whether your application requires reduced contact surface, high

Eagle Polyurethane Belting

• Custom design capabilities: special profiles, dual durometer, static

Trackstar UHMW Belt & Chain Guides

• Wide range of standard profiles for use in guiding belts, chain

• Available from stock with same-day shipping.

• Two-piece guide and channel design simplifies installation and

T-Max Belt and Chain Tensioners

• Constructed from high-quality materials for proven durability in

• Wide range of tensioners to handle single and multiple strand

Eagle White 40D

LCF Low Coefficient of Friction

PowerTwist SuperGrip Top PU

PowerTwist SuperGrip Top PVC

PowerTwist Friction Top®

PowerTwist Roller Drive™

Eagle White 40D

Eagle Blue 55D

Eagle Red 85 CXF

Eagle Ivory 85 SGT*

Eagle Green 89 SGT PVC

Eagle Red 90 SGT PVC

Eagle White 40D SGT PVC

Eagle Hyfen 85 CXF/CXR

Eagle Fabricated Belts

• High coefficient of friction.

• Elastic with excellent memory.

• Popular 1/8", 3/16", 1/4", 5mm and 6mm sizes in stock.

• Contact Fenner Drives for part numbers.

solution for live roller conveyors. Material and Part

• Twisted loop construction packaged with 5050003 3/16" × 6"

Eagle Fabricated Belts Eagle Clear 85 5050002 3/16" × 12-3/4"

5050017 3/16" × 13-1/4"

• Rapid order turnaround.

2mm, 3/32", 3mm, 1/8" Round Cross Sections

Dimensions are for reference only.

Part Dimensions Ø Minimum Pulley Ø 4% 6% 8% 10%

Part Dimensions Ø Minimum Pulley Ø 1% 2% 3% 4%

Trackstar® Round Belt Guides

Part Dimensions Ø Minimum Pulley Ø 4% 6% 8% 10%

Part Dimensions Ø Minimum Pulley Ø 1% 2% 3% 4%

Trackstar® Round Belt Guides

7mm, 8mm, 5/16" Round Cross Sections

Part Dimensions Ø Minimum Pulley Ø 4% 6% 8% 10%

Part Dimensions Ø Minimum Pulley Ø 1% 2% 3% 4%

Trackstar® Round Belt Guides

Tango™ Belting 0470225 0470233 3/8" 3.0 76 190 86 65 30

Part Dimensions Ø Minimum Pulley Ø 4% 6% 8% 10%

REINFORCED Working Load @ Percent Tension Weight

Part Dimensions Ø Minimum Pulley Ø 1% 2% 3% 4%

Trackstar® Round Belt Guides