Geral
Geral
Geral
ine engine. 16 inches LOA, 1 1/2 inch hose connection tube side, 3/4 inch NPT fittings shell side. 2 ea available.
terpillar Parts and Caterpillar Engine Parts for Diesel and Natural Gas engines. Since 1955 IPD has been synonymous with
ef="http://www.surplusman.com/Detail.php?itemid=6491"_self">(click here)</a> NSN 2940011033267
water pump. Housing part no. 5135915, pump part no. 5144689. Group no. 4.4050
ea available.
02640579. Quantity available.
drilled in 5 inch thick collar, 5 1/4 inches deep. 8 ea 3/4 inch bolt holes
1/2 inch thick collar, 7 inches deep. 8 ea 1 inch bolt holes.
inch thick collar, 8 inches deep. 8 ea 1 inch bolt holes.
r, 7 inches deep. 8 ea 5/8 inch bolt holes.
e collar. 8 ea 1 inch bolt holes.
Bolt pattern 10 3/4 inch diameter, 6 bolt pattern. Shaft collar 8 1/2 inches deep. Matches up to this coupling flange: <a hr
e. NSN 2910002348492
, 20 HP. NSN 28058725972. Gorman Rupp self priming pump. 200 gpm @ 3300 RPM. In as-is condition. Unit NSN 4320
ble. NSN 2815000601125
4730002898493
Adapter side 8" OD, 7 1/8" bolt hole diameter, 3?8" bolt holes.
phy hour meter and amp gauges. Manual Vernier throttle control. John Deere 0-3000 RPM electronic tachometer. Custom
al available.
NSN 2530011715347
80 34151 76002 34185 51014 61016 And Bearing kits: V200-201-38WR V200/201-32-W3-R
7.4L engine, 1992 Chevrolet Caprice 5.7L 350cid engine, 1992 Pontiac Trans Sport V6 3.1L engine, others. 13 ea availabl
12 tooth pinion
12 tooth pinion
5712. Clockwise rotation. 11 tooth pinion
. 11 tooth pinion
press 3500, 5.7L. 2 ea available. NSN 2530-01-369-4178, 2530013694178, 2530 01 369 4178.
, others. 2 ea avialable. NSN 2920009728843
46469, 2520 01 124 6469. 7 available.
5, LT215/85-16, LT225/75/16. 7.00-16, 8.00-16.NSN 2540012229734
valve resulted from the requirement for high quality cryogenic valves having performance features not available in other
014421010
antity available. NSN 4730003568086
2651-12 MSHA IC-64/2 4Q91. NSN 4720011284587
NSN 5925011449133
Pump Nos. AR49771, RE36903, RE43272. 6404A, 6404T (To Eng. No 357083) (400-500 Series) w/530 C.I. 6 Cyl. Eng.
ned for burnout clean-up, and wax removal on low heat cfc/hfcf/hfc applications
uous RPM 26500, 28000 max. Made by Alco Power, Inc. NSN 2990-00-480-0039, 2990004800039, 2990 00 480 0039.
or applications with (small) 3 ¾” main journal diameter. Part no. 4375957. Used, may need to be turned.
able. As pictured.
eries 6 cyl diesel. Re-manufactured, in excellent condition. NSN 2815-00-762-1376, 2815007621376, 2815 00 762 1376
ries 6 cyl diesel. Re-manufactured, in excellent condition. NSN 2815-00-762-1376, 2815007621376, 2815 00 762 1376.
7/8" hole). Fits models D21, 180, 185, 190, 190XT- Gas and Diesel. Replaces 74007554.
647, 650, 653, 654 Series Transmission. For Navistar. New, several available. NSN 3020010653163.
and Rotation
but we have in stock. We also have Allison flywheels, and a large selection of Allison / Detroit Diesel bell housings.
" across bolt holes.6 bolt pattern. Fits Allison M20 Gear.
plate, 1 output cover bolt hole is cracked (see photo). Pan no longer available.
d, in excellent condition.
o. AT540. Serial no. 080207. Crack in case at mounting bolt hole, right side. Laton hydraulic motor PN 005430-002, ser
040010830922
ea available. NSN 2815009195068
700-90-MG18. No. 10 Std. 42" long x 3 1/16" / 2 7/8" wide (tapered) x 1" thick. 4 boxes of 8 ea.
A-80B, 21210. Firing order 1-2-4-3.
tomer no. P11582. Firing order 1-5-3-6-2-4
by American Bosch
10002169769
50 PSI. 300 deg F. Dual pass tube assembly. 3/4 inch NPT fittings shell and tube sides. Serial no. 1714517
Cylindrical PTC" injectors V6, V8, V12, 5 1/2" bore. NSN 4910010984605
eral available.
t dimensions 22" x 4". Stainless Steel construction. NSN 2510014203026
them the ideal solution to your industrial pressure control needs. Diaphragm switches are ideal for applications demanding
6W. NSN 5945012176897
r 50/60Hz brushless generators requiring 7A of excitation at 63Vdc. the AEC voltage regulator receives its power for preci
ical voltage regulator for 50 or 60 Hz brushless ac generators. The APR has frequency compensation which aids system b
ric offers two high powered, low cost analog excitation controllers, the AVC63-12 and the AVC125-10. These environment
ess generators. the controllers include frequency compensation, overexcitation shutdown, solid state buildup circuitry, and
e on 50 / 60 Hz brushless generators. the encapsulated regulator is small in size, ruggedly constructed, and incorporates
on 50 / 60 Hz brushless generators. Several models are available with 240 or 480 VAC sensing and with or without paral
eration. 2 ea available.
rol, transfer switch control, metering, protection and programmable logic in a simple, easy to use, reliable, rugged, and co
802. Used.
t replacement for SR4A2B16B3A. Input sensing 480 VAC, 30 VA, 50/60HZ 3 phase. Power, 120 VAC, 840 VA, 50/60 HZ
tors. This encapsulated regulator is small in size, ruggedly constructed, and incorporates solid state technology with frequ
SN 2530003395405
N 2530011797589
it Diesel engines.
Serial no. 2C0774E. Belt driven.
oit Diesel engines.
Turns well.
g and details.
others. SAE 4 bell housings.
available. NSN 2520009205620
Part no. MHD332812EZ51R01. Turns tight, may need work
152-2373, 2990011522373, 2990 01 152 2373.Turbo kit is a schwitzer p/n 5705073 New in box, quantity available.
ion. Reduction turns, transmission frozen. Good rebuildable core.
As pictured.
sel part no. 5129524. Splined for 71-C, 72-C, 73-C. Will also work on several Paragon transmissions. 8 inch diameter, in
1. Serial no. 1520. Low hours, in excellent condition. Comes with mounts to accept "Crusader" style or other mounts.
N 2805000185293
, 6.15 inch OD
L, 5V, 5VX section belts and B bushing. Ability to run multiple belt sections allows a variety of pitch diameters and power r
and 4 ea DF-237-M1, 1500 to 1800 lbs engine weight. Made by Bushings, Inc.
0 lb, 80 - 500 HP engines (4 point mount). Sets of 4 ea.
inexpensive cable that is easily adjustable and can be locked in place to hold engine at the desired rpm's. Because of the
9V. Made by C.E. Niehoff & Co. NSN 2920010760480, 2920004199224
ea available. NSN 3040012501951
:1 ratio. No hydraulic pump, no clutches, no engine oil dam. With clutch housing and flywheel adapter, SAE 2 - 11 1/2.
no. 1174-0189. Comes with SAE 1 oil dam, clutch pack and pump drive shaft.
no. 1170-1279. Needs clutch plates.
0100. SAE 2 Oil Dam Adapter. No selector valve, no clutch pack.
1-50210. 3:1 (engine rotation) ratio. Hyd pump no. 1-13410-0500. Rated to 550 HP. Complete with clutch pack, SAE 2
0210. 3:1 ratio.
7 Ratio - 6.0 : 1 SAE #1
405-0889, to 950 hp, several avilable.
, B000C41H5Q.
s available. NSN2815011493291
no. X-217736-B. Twin Disc spec no. N62570, serial no. 3A5854. Surplus new, unused.
845, good used take-offs
225 RPM. Caterpillar 7261 marine transmission
e. 2 ea available.
N 2815008586165
ed. 2 available.
new in box, 3 available no box, damaged fans. NSN 2920015152886. Rebuilt part no. 0R7701
or 32V. New, in box.
N 2815011982833
10 01 178 9786
10011527834
. NSN 2910012748300
zer. 2 ea available.
Performance spec no. OT-8808. Engine family PCT0403F2E0. 290 HP. Governor part no. 4R9040. SAE 2 bell housing, n
disc MG-506 gears, 1.97:1 ratio. Spec no. 33815, serial no. 392505. 12V. 2 ea available.
ore engine, turns over.
4. NSN 2815010112686
93. Off of engine serial no. 35Z13874, arr. no. 1082861. Includes fan shroud and mounting hardware as pictured.
generator drive engine, Block serial no. 35Z13874, arr. no. 1082861. Part no. 2P3912. As pictured.
08-7128, 2990012087128, 2990 01 208 7128. New in box, 3 ea available.
good condition.
udes exhaust elbow
o. 6N3147, Assembly no. 4N2583,Adapter housing casting no. 7N1313 Ser no. 99U1416 & up. Note Mounting feet on
nce Spec no. 2T4049. Modification Spec no. PA1121-02. 510 HP, hour meter reads 03469. SAE 1 belll housing and flywh
wheel. Front mount PTO. Missing governor, raw water pump. Includes expansion tank and piping pictured. LH exhaust m
2815-01-312-1359, 2815013121359, 2815 01 312 1359. New, in box.
N822, 6N823, 6N3880, 2P4303, 2P4301
8 ea available. NSN 2815005438924
r 3500 series engines. 23 ea available. NSN 2815012083083, 2815013565441
82, 7W8668, 7W2063. NSN 2910-01-3190-107, 2910013190107, 2910 01 3190 107. New in box, 5 ea available.
3176, 2815013193176, 2815 01 319 3176.
. NSN 2940012059477
4. New in box. NSN 2815012090951
5169940, 2815 01 516 9940.
517-8785, 2815015178785, 2815 01 517 8785.
NSN 2990015167742
782. New in box, 2 ea available.
continuous rated, 1225 RPM. In excellent condition. Caterpillar 7261 3 to 1 marine gear off of cat D399, 3 to 1 marine tra
ntinuous rated, 1225 RPM. In excellent condition. Caterpillar 7261 3 to 1 marine gear off of cat D399, 3 to 1 marine trans
0 01 299 5719. Dimesnions: 18.21 X 13.41 X 0.185 462.5 X 340.6 X 4. 68 internal teeth. For Caterpillar 825C Compacto
65035. 410 HP. SAE 1 Bell Housing. Jake brake model no 312A, serial no. 312AA05740. 24VDC. Bendix air compressor
on. 2 ea available.
2L6983, 3N509, 1H9894, 8L4911
2839, 5L3211. 3 piece manifold, includes cooler core part no. 3N0751.
andle 3L5478. Off of engine arrangement no. 3202349, serial no. 47B409
s chamber assembly part no. 8S3617. Several available used. NSN 2815009782059
3426. 3 ea available.
e heads, 3 ea available. NSN 2815001253305
l cooler and aftercooler
City 3 pump drive, assembly no. 20-2001914. Model no. 763C. 1:1 ratio, style no. 36
r D-342. 24V.
ed 300 BHP @ 1200 RPM. 5.75" bore x 8" stroke. NSN 2815-01-317-7613, 2815013177613, 2815 01 317 7613.
part numbers: 6L3050, 6L3022. As pictured, 2 ea available.
g part numbers: 6L3050, 6L3322, 6L3022, 6L3021. As pictured.
186. Front housing part no. 5L4695. In excellent condition. NSN 2930002045735
mbly no. 7N125. 7N0125.
5. As pictured.
ngine. Perfex part no. X518200C66. End cap casting numbers: G6825, G6830, G6882, G6833
Generator drive engines with water cooled exhaust manifolds. B series connecting rods. Woodward UG8 governors. serial
ter. All copper-nickel construction. For D-399, 3516, others. Part of Heat exchanger assembly group no's: 3N5513 New
1940, Full load RPM: 1846 121 HP, Engine does not turn.
on complete overhaul.
he following seals, gaskets and mounting hardware: 9Y6859, 8N6986, 6L0830, 8M3182, 2B0858, 1B9575, 7H3171, 9S41
ng part no's: 1672312, 1672201, 1J0708, 1P3702, 2K3258, 8C3840, 8T0785, 4J0522, 5J-4989/0101. NSN 3830-01-267
As-is, turns.
le. National Stock no. 2910-01-150-0950, 2910011500950, 2910 01 150 0950.
0004392872
h spline. Note bolt pattern for flywheel mounting.
C. New in box.
A278. Cat head 5" diameter x 5 1/2" long. In good working order.
o. 1516D. 3/4" inlet and outlet, tapered key shaft (1 1/4" - 1 1/2"). Shaft 3" long. 3 available. Surplus new, unused. N
ng no 377127. Small plug holes, air pump holes in exhaust ports. 2 ea available.
vailable. NSN 2990013653583
ol range. 277 VAC, 30A. 1 inch pipe inlet and outlet
_2805010462005.
ge quantity available.
. NSN 2920010750821.
815003538301
ssembly. 53 ea available. NSN 2815003538305
SN 2815002730429
2815006107819
NSN 2815005744316
lable. NSN 2815003641729
0003641940
5 ea available. NSN 2815003538213
NSN 2815003902146
N 2910003538193
ble. NSN 2815001260530
N 2815003643786
NSN 2815003538211
e. NSN 2815003219961
2815003538339
815003538291
NSN 2815001460413
5003538184
278A, EMD 278A. 2 ea available. NSN 2815003644360
2815003641759
ailable. NSN 2815003557214
N 2910003538298
ble. NSN 2815002303072
2001. Coast Guard Approval no. 162.050/1142/2. 22GPM max flow rate. max operating pressure 30 PSI. Clean Water I
SN 2920011375493
N2040007059249
09790. Serial no. C3932. Pressure rating, inlet - 100 lbs, proof - 225lbs. Operating tempurature 925 deg F. Voltage 28
2815000364255
5 HP, 720 rpm engine. NSN 2815-00-856-2024, 2815008562024, 2815 00 856 2024. Several available.
VAC 3 phase. Application MEDR-12/LO R-502
s Steel. Large quantity available. NSN 4030-01-436-3733, 4030014363733, 4030 01 436 3733.
SN 2815012103425. 30 ea available.
009235960
esel. 15 ea available. For Cummins NT855 Engines.
no. 80424. Core only.
. For Holset HX35W turbos. Used on Cummins 5.9L 1994 and up. NSN 2990012975221
mins by Prestolite.
013852524
Runs, generates electiricity, as is.
SN 3120012263750
e. 2 ea available.
120012743377
9104, 3905802, 3909395, 3905801, 7905012, 7905015130, 3957544. New, as pictured. 2 ea available. NSN 281501526
NSN 2910014635200
SN 2815-01-478-2079, 2815014782079, 2815 01 478 2079. 18 ea available.
0 D85-bulldozer-NT855-C280 D155A-1-bulldozer-NTA855-C360 BJ374-mining dump truck-NT855-C250 -BELAZ-540(A)-m
203170 Ring set part no. AR11930 Wrist pin set part no. AR70575 Piston part no. 1071463 NSN 2815-01-385-6803. fits
gear part no. 3902175. For Sherwood M71 raw water pump.
07. Includes seal no. 3907177, liner 3919937. For C6 series, 8.3L engines. 13 ea available. NSN 2815014144120
ngines. NSN 2910014828565
os, intercooled. 850 HP. Idle range 575-625 RPM. SAE 0 b ell housing and flywheel. Well maintained, excellent running
ing no. 3882615.
667, serial no. C3494L. Engine Family D201, CPL 5004. 136HP @ 3300 RPM. Heat exchanger cooled. In excellent conditio
15011085384
4320011185394
. NSN 4320007904861.
00-733-2652, 2815007332652, 2815 00 733 2652. For diesel engine 12 3D1700 12V142AO 900HP 2300RPM CW. 3 ea a
/4" flare connection
2530002744511
shoe push rods. 9 ea available. NSN 2530002744511
he years 1970-80, and some mid 80's applications. Part no. 18009497. 2 ea available.
0010472363
Re-manufactured.
2920007408148
SN 2920010116213
W. NSN 2920004548053
n. In good condition.
Clockwise rotaation.
manufactured
A. NSN 2920000092162
NSN 2910013076389
4 64674-0. Includes suction flange and line.
ets, as pictured
sets available.
38. governor type SW / VS. Idle range 500 - 900 RPM. Drive ratio 2:1.
ox drain. 24V starter. Set up for keel cooling. Good running take-out
and flywheel. No starter or alternator. Engine frozen.
osmoline coated. 2 available. Part no. 5147078. NSN 2815005778237.
tary rebuild.
006003196
element 3570.
9422. 2 ea available.
1 and 92 engines
wheel. 2 ea available.
13 AR 1.39 (Option Type #'s 1095, 1096, 1098,1102, 1107,&nb
N 2930013381904
00 RPM. 2:1 drive ratio. Missing top cover, as pictured. For inline 71 series.
0 RPM. 2:1 drive ratio. Missing top cover, as pictured. For inline 71 series.
0 RPM. 2:1 drive ratio. Missing top cover, as pictured. For inline 71 series.
xcellent condition.
e, also 1 used.
NSN 2910009676026
940012510666
# 380, Requires 2. 2 ea available.
43. Group no. 12.4001. Casting no. 400065. 12 CFM. Made by Midland.
haft part no. 5133711.
2 ea available.
ea available.
20 00 083 8021. Used, in good condition. LH helix also available, part no 5121816. <a href="http://www.surplu
slightly used.
Several available.
ston skirt, wrist pin and liner only. Part no. 23524596. NSN 2815014817904
h serrated hole.
330004317232, 5330 00 4317 232. 3 ea available.
5168929, group 7.4530 and 24V solenoid 23504197, group no. 7.4519
W-ALT, serial no. 0203014. Input 140 V - ph 2.0A - hz. Output, 120V 3 Ph 27A 200 HZ. NSN 2920014431881
no. 5133295-M, 5133295. National Stock No. 2990012058755. New, unused. Part no. 5104774. 2 available.
vernor, SAE 1 bell housing and flywheel. 24VDC starter. N60 injectors. Keel Cooled.
ernor, SAE 1 bell housing and flywheel. 24VDC starter. N60 injectors. Keel Cooled.
changer cooled. SAE 1 bell housing and flywheel, 24VDC starter and alternator. N-70 injectors. Walker Air-Sep system.
hanger cooled. SAE 1 bell housing and flywheel, 24VDC starter. N-70 injectors. Walker Air-Sep System. Includes Gauge
co flywheel. N-65 injectors. Engine turns over well. Woodward Electronic governor. Keel cooled expansion tank off of en
using. No starter, alternator. Set up for keel cooling. Variable speed governor.
or, 500-600 RPM idle range. Part no. 5143586. Group no. 2.7001.
or, 500-600 RPM idle range. Part no. 5143586. Group no. 2.7001. Missing some parts, as pictured.
rive 12V-71 (Rear Blower)
ox air filter. 24V shutdown solenoid
03538. Set up for keel cooling. SAE 1 bell housing and flywheel. Walker Air-Sep System. Dual weight, limiting speed go
llent condition.
down solenoid.
er. SAE 1 bell housing and flywheel. Set up for keel cooling. good running take-out.
4635. PTO model no. 1BF214PI, serial no. 105916. Spec no. 29777. SAE 1 bell housing. Core, will part out.
d turbos. Garret Turbo part no. 465689-9001. SAE 1 bell housing and flywheel. Low hour rebuild, in excellent condition. O
432, cooler plate adapter 5122850, cooler housing 5117690. Also includes cooler core 8539503 listed separately <a href=
silencers available.
manifold part no. 5122458, for heat exchanger operation.
silencers available.
injectors. SAE 1 bell housing and flywheel. Radiator cooled, skid mounted. 2 Bendix air compressors, engine and belt dr
bell housing and flywheel. 24V system. Radiator cooled, skid mounted.
s, 32V starter. Water cooled turbos. Garret Turbo part no. 465689-9001. SAE 1 bell housing and flywheel. Low hour reb
exchanger cooled. SAE 1 Bell housing and flywheel. N70 injectors. Good running take-out.
. 12VA-56044. N70 injectors, 24V system. Woodward Governor, pat no. 041820, serial no. 1803573. Detroit Diesel par
nor, 500 RPM minimum. Part no. 5147214, superceded by part no. 5106262. Group no. 2.7001
ble speed governor, SAE 0 bell housing and flywheel. Engine does not turn
e speed governor, SAE 0 bell housing and flywheel. Rust under valve covers, some injectors and valve train parts missing
606. N-55 injectors. SAE 1 housing. Excellent running take-out, 70 lbs oil pressure. Hydraulic governor drive without go
n good condition.
ea available.
26. Quantity available.
me. 05144912 Piston Skirt and Sub Kit SK00855 Ring Set.
112. 8 ea available.
no. 1.3313. 2 ea available.
. SAE 1-18. Appears unused.
6 ea available.
454, 527, 529, 531, 544, 583, 652, 674, 720, 725. Group no 3.4030. 12 ea available. NSN 2920000806476
Height; (Option Type #'s 106, 114, 130, 136, 145, 159, 1
8 ea available.
R5234920, 5234920
10 ea available.
. Several available.
2 ea available. NSN 2990013708047
67, 168, 340, 350, 359. Core, as-is. Group no. 3.5001. 4 ea available. NSN 2950010898895
rankshaft also available <a href="http://www.surplusman.com/Detail.php?itemid=4289"_self">(click here)</a>.
Quantity available. For 149 series electronic injectors.
d flywheel. N-55 injectors. No starter, no alternator. As pictured. In good condition.
inlet and outlet ells part no. 5143863. Off of 16V-149 NA marine engine. 2 available. 149 series.
inlet and outlet ells part no. 5143863. Off of 16V-149 NA marine engine. 2 available. 149 series.
Note variance in length of expansion joints, as pictured. 8" standard pipe flanges.
n Type #'s: 167, 168, 340, 350, 359. Group no. 3.5001. 2 ea available. Used, turns well.
00601. OSK00603, OSK00604, OSK00606, OSK00607. Does not include head gasket set. 3 ea available. 149 series
et, turbo inter/aftercooler. 149 series.
00 HP. 2 ea available. Dimensions, 109" long, 43" wide, 66" high. <a href="http://www.surplusman.com/Search.php?sea
400 HP. 2 ea available. Dimensions, 109" long, 43" wide, 66" high. <a href="http://www.surplusman.com/Search.php?s
part no. 23506053. For 16V-92, 16V-149. 92 series, 149 series. 2 ea available.
6V-71 Engines.
or, 500 RPM minimum. Part no. 5144832. Group no. 2.7001
ell housing. Front PTO housing, SAE 1 with 3 sheave pulley. Core engine.
AE 0 bell housing. Front PTO housing, SAE 1 with 3 sheave pulley. Core engine.
Lima generator, 23KW. 60 hz @ 1800 RPM. Basler KR4FF voltage regulator. 12V starter and alternator. Woodward Hy
Used. as pictured.
mbly 5163654
00 PM 3PH 230 Volts, 4 wire Y. No starter, fan, water pump, thermostat cover, fuel pump, intake or exhaust manifolds Uni
990000905604
95, 2930009705995, 2930 00 970 5995. 4 ea available.
NSN 2930003541273
2:1 ratio. Housing part no. 5154355, breather part no. 5165693. Good used.
For radiator cooled engines. Used.
el no. 1026-5401.
50-L-61. 10 lead, 60 hz @ 1200 RPM. Powered by Detroit Diesel 2-71, serial no. 2A52269, model no. 2151. No governor
8. 149 series
ousing and flywheel. SW-VS governor, 550 RPM minimum. Part no. 5138851. Engine turns, appears in good condition. N
variable speed governor. SAE 3 bell housing, Borg Warner flywheel (D.D. PN 5125756).
nd flywheel. DW-LS Governor. Engine does not turn
. 5033-6239, serial no. 3D196174. DW-LS governor idle range 500-750 RPM. Part no. 5107127. Bell housing part no. 51
8. Used, in excellent condition.
20003899090
nor. N-65 injectors. Keel cooled. Generator Kato model 10SX9E, serial no. 79551. 12 lead 1800 RPM. Basler APR63-5 v
inches long
st manifold. Keel cooled. Woodward hydraulic governor missing lid and fuel rod. No blower. SAE 1 housing with Delco fl
3-71, 4-71
ewed from the rear. For 3-71, 4-71, 6-71 engines. Part no's. 8920513, 5159452, 5177241.
149707. Includes intake part no. 5175674. Group no. 5.1030
housing. New.
35. New, unused. 3 ea available. NSN 2815007715862
, SAE 1 bell housing, no flywheel. Appears to be very low hour engine, hourmeter reads 436. No exhaust manifold, no wa
bell housing. Front mount PTO housing, SAE 3. Serial no. 3A91979, model no. 1033-7005.
eel housing, Delco flywheel. Woodward hydraulic governor.
7. Includes thermostat housing and flange part no. 5122517. Group no. 6.2085
1001. Oil cooler housing part no. 5135914, group no. 4.4050. Casting no on cooler housing 5119453. Will sell separately
5330001876536
are for 8V-53.
Pump part no. 5119281, cooler housing part no. 5116491. Includes block adapter part no. 5128414.
167741. Includes heat exchanger core.
8-K-66 3ph 208/240/480 V 60Hz, 1800 RPM Driven by 4-53 Detroit Diesel Serial #4D-68191 Model #5043-7201 No blowe
80. Complete with main caps.
2815 00 967 3214. Surplus new, unused. 4 ea available.
ernor part no. 5142803. 7N-65 Injectors, 4 valve head. SAE 2 Allison bell housing. Ex-generator drive engine. 2 ea ava
d. 2 ea available.
n. Includes water in & out manifold part no. 5146191.
10207. Detroit Diesel part no. 5108295. Generator end no longer available.
SAE 2 front PTO. Spline drives front and rear, adapters for hydraulic pumps.
ywheel housing. No flywheel, starter or alternator. 0 hours on re-build.
NSN 2815001210438
Includes crankshaft, camshaft, balance shaft, rods and pistons, as pictured. SAE 1 bell housing.
. Model 10438K32 180 HP At 2200 rpm serial 4A0290410, 4-71T, GM471T,
4D-192257. Generator model no. BA1792CM, serial no. 795301-0A. 50 kw, 62.5 KVA.480 VAC, 75A. 60 hz @ 1800 RPM
3 series engines, 18.7:1 CR.020 OS. 2 kits available, 1 Detroit Diesel, 1 Interstate McBee. NSN 2815011343484
815-01-230-0203, 2815012300203, 2815 01 230 0203.
le. NSN 2815-01-230-0207, 2815012300207, 2815 01 230 0207. Several sets available.
odel no. SP114P1, serial no. 3S1606, BOM no. 35131. 2 ea available. <a href="http://www.surplusman.com/Detail.php?
erial no. 6A66486. High block, 4 valve head. Engine does not turn over
lt. 2 ea available.
ray Marine no. C14730. Gray Marine / Twin Disc 8708 "crash box" gear, 3:1 ratio. Gray Marine Model no 64-YTL. All inte
no 5189012. Breather no. 5114263. Oil cooler housing no. 5111405
arine engines. NSN 2815003541188
V-71 engines. Also in stock, valve covers for 4-71 and other Detroit Diesel engines.
spected, no cracks. As pictured
ected, no cracks. As pictured
ected, no cracks. As pictured
ected, no cracks. As pictured
ead installed. Set up for Allison Marine Gear. Engine has been out of service since 1995. Block casting 5194848 make of
cooled. Allison Bell housing and flywheel, SAE 2. With 12V starter, no alternator.
er cooled, with 12V starter and alternator. SAE 2 bell housing with Borg Warner Velvet Drive adapter and damper.
ission, model no. 20-R, Serial no. 45714-5011. Part no. 6770016. 12V starter.
cooled, Allison SAE 2 bell housing. 12V starter and alternator.
using and flywheel, with Twin Disc Drive ring. Heat exchanger cooled, Gray Marine. No starter or alternator.
SAE #1, Good running Takeout. 12A2369
el. 12 V starter, hydraulic governor. Keel cooled ex generator drive. Runs excellent
e SAE 1 Bell Housing 4 valve head/ 24V starter
available. for 6-71 engine
ng, Delco flywheel. Woodward hydraulic governor, part no. 041817, serial no. 2254922. Keel cooled ex generator drive.
. Rockford direct PTO, model PTA-1SD-50, serial no. 4070876. Detroit Diesel part no. 5171519. 1150 hrs on unit.
rbo, turbo and engine do not turn, With Allison 1:1 Marine Gear, Serial #8700517
,2001. 4 valve, 3/4" industrial. Rebuilt, had some minor rusting from storage. Cleaned and cosmolined. NSN 28150112
w condition.
nor pictured.
ard, polished. Crank magnafluxed, and checked for straightness.
ernor Part no. 5116009. As pictured.
air compressor, starter. Out of rough terrain forklift
0 minimum idle RPM.
135518. In excellent condition.
5122990. 2 ea available.
ernor part no 5103782, 500-900 RPM range. Standard bore, rods, mains. N70 injectors. SAE 3 bell housing and flywhee
e, rods, mains. N70 injectors
52526. 12V starter and generator. Set up for keel cooling. Test ran, 55 psi oil pressure. Available with or without transm
71, 310,329, 358, 378, 395, 426, 427, 428, 429, 430, 431, 442, 444, 447, 453, 454, 476, 478, 479, 480, 481, 524, 527,
6. Turns well, in excellent condition.
take-out, 60 lbs oil pressure at fast idle. N-50 injectors. SAE 3 bell housing, flywheel accepts 8" diameter Borg Warner d
fered as pictured
turbo, air compressor, exhaust manifolds, thermo housings and crossover tube. SAE 1 bell housing, automotive flywheel,
W/Marman Flange)
6V-92 turbo engine.
M SAE 1 bell housing. DW-LS governor, part no. 8921497. 9G90 injectors. Includes oil cooler not pictured. NSN 2815-0
8 Inch thick.
14972 X Head wide gap. X head piston, skirt pn 23522070, Head pn 23512150. Made by Korody-Colyer, 2 ea available.
able. Also available by Corody Colyer. NSN 2815-01-247-7901, 2815012477901, 2815 01 247 7901.
Federal Mogul. Quantity available. NSN 2815003697910
ade by Korody-Colyer
SN 2815000192642
CR. Group no. 1.6110. 84 ea available. NSN 2815009945786
1.16180.81 port.010 oversize. 29 ea available. Some rusting from storage. NSN 2815008165698
70 ea available. Some rusting from storage. NSN 2815000192623
p no. 1.6115. Trunk type, 15 sets available. NSN 2815008593742
bores standard. With or without cams. We also have the oil pan, heads, and air silencers for this engine (see photos). Cr
923:1 ratio. NSN 2990012423006
tors. Front mount Twin Disc PTO, model no. SL111PM3, spec no. 36442. Allison transmission pictured no longer available
1. Used, in good condition. 4 ea available.
ds. Fresh water cooled with raw water pump and heat exchanger. 12V starter. Single weight variable speed governor. E
up no. 6.1001
ds as pictured. Manifold part no. 23501807. Old part no. 5116079.
rt no. 5147138
3, 2815001505083, 2815 00 150 5083.
o manifolds. Running Take-out. Test ran, 45 lbs oil press at idle. SAE 3 bell housing and flywheel. Leece Neville 12V alter
rt no. 513492
ock and crank. No cams, flywheel or bell housing. No Oil Pump. Industrial, RA, Turbo block.
0, thrust standard.
governor pictured.
r mount. As pictured.
Bell housing and flywheel. 24V starter and alternator. Good running takeout.
anger cooled, 9295 injectors. With Allison M20L gear. Garrett twin turbos, part no. 5143110, model no. T-08A64. 32V s
7. 2 ea available.
r alternator. Heat exchanger cooled, no raw water pump. SAE 1 bell housing and flywheel. Engine turns 10 degrees, locks
For 8V-92 engine.
Brake equipped. DW-LS governor, part no. R8921497. SAE 1 Bell Housing. NSN 2815011867251, 8V-92TA, 8V92TA
wheel. Variable speed governor. N50 injectors. RH rotation. 60 lbs oil pressure. No raw water pump. With 12v starter an
son M20R transmission, Serial no. 35861, part no. 6770016, 2:1 ratio. Heat exchanger cooled, manifolds included.
earch Turbos. Walker AirSeps. With Allison MH-20R marine gear, part no. 80M22H, serial no. 0910056649. 24V starter an
rbo part no. 8923340. VLSLS governor, part no. 8923340. Vickers hydraulic pump model no. V20F1P3P3B8G. Jake bra
ke equipped. Leece Neville 28V alternator. V.L.S.L.S. governor part no. 892-7079, 500 -1800 RPM. Tu-Flo air compressor
no. 1.5001. NSN 2815011668757
a available.
r 92 Series engines
53, 23524342. Liner Part no. 23507231, piston part no. 23508731. Cylinder kit group no. 1.6182. 17:1 CR turbo coach a
H. Helix; R. Bank Rear). For 92 series engines.
Group no. 2.7001. SW-VS governor, 550 RPM minimum. For 92 series engines.
NSN 2815010627272
nor. SAE 0 bell housing and flywheel. Missing fresh water pump cover. Keel cooled. Good running take-out
exchanger and core, oil cooler. Heat exchanger assembly part no. 8502373, Gray Marine part no. D6-275. Tank part no.
wer, governor parts. Engine turns over rough. Allison 1:1 Torqmatic transmission, part no. 6753252 serial no. 10810.
W-LS governor, 500-600 RPM idle range. No fuel rod. For in-line 53 series engines.
1. Heat exchanger core part no. 8529617, group no. 5.5003. Includes part no's 5167769, 5167741, 5167770, 5167777,
for keel cooling.
et 5168929, group 7.4530 and 24V solenoid 23504197, group no. 7.4519
acket 5168929, group 7.4530
DW-LS governor, 500-600 RPM idle range. For in-line 53 series engines.
rial no. LB32768. 010 Bores, standard crank. 32V starter, SAE 1 bell housing. N-70 injectors. Heat exchanger cooled, Ja
amp; High Mount; 12L; (Option Type #'s 1672, 1737). Used, turns well.
Spec no. 50123563000. No flywheel. Jake Brake equipped. 12.7 liter standard engine, DDEC III/IV Engine Control. 12V
15.5 CFM. Includes drive coupling part no. 5143616. Bendix Tu-Flo 700. Several available. NSN 4310011646916
core at bottom.
xchanger tank and water pump. Old part no. 5145524.
5125239. 12 ea available.
, V-92 engines. 8 ea available.
p no. 4.2290
0000548325
1, 92 engines.
V-71, 92 series engines. Casting no. 5133295
ies engines.
-71, 92 series engines.
r on body 5122894, superceded by 8922104. 2 ea available. For V-71, 92 series engines.
ilable. NSN 4320010388118
Group no. 4.4211. 2 ea available.
. For V-71, 92 series engines
-71, V-92 engines. Walker pump. NSN 2930011115390.
V-92 engines. One of two sides <a href="http://www.surplusman.com/Detail.php?itemid=6813"_self">(click here)</a>
two sides <a href="http://www.surplusman.com/Detail.php?itemid=6812"_self">(click here)</a>.
2 series. 2 ea available.
-71, V-92 Series. 7 ea available.
NSN 3040000548325
N 3040000548330
V-92 series engines. 4 ea available.
ilable, some missing front cover. NSN 2930013549202
engines. SAE #2 housing, for Allison gear. NSN 2815-00-577-8237, 2815005778237, 2815 00 577 8237. New, in box a
ate no. 5171419. Off of IL 6-71 engine. Used, in excellent condition. Several Allison flywheels available, also Detroit Die
issions. 5 ea available.
rt no. 5C23910-V
, 11 1/2 inch plate.
el ESSE-2AM, serial no. 86734. New in box, with install manual.
, with and without bearing and roller. Used as clutch dogs on X8708 crash box, others.
. 4 ea available.
NSN 2520001127479.
a Dana model no. 270XBAJP-D4XK. Allison assembly no. 23014539 / 84H01. 14 ea available. NSN 2520011324262.
ries engines. Group no. 2.7001
nning take-out.
6, camshafts 4005186, 4005187. Cylinder head 4006154.
135, 4016136, 4016133, 4016134. Core assembly part no. 4016245.
at 750 rpm also available new and used spare parts
2920013566830
wered by Deutz 4 cyl air cooled diesel engine. Model no. 8369053, 46KW. 1/min 2300. Trailer mounted.
2-000. 120 VAC. NSN 4440010692052
2 available.
n units. * FILMTEC SW30 membrane elements have the highest flow rates available to meet the water demands of bo
style 600 gph ROWPU, watermaker. Several available. NSN 4610011052075 Lowest cost surplus RO Membranes <a hre
Not rated for steam. NSN 4730002888430
no N00104-91-g-a020 0006, class S serial XXM338, capacity 100 CFM, discharge pressure 125 psi
n, and engine instrumentation for all types of diesel and gas generator sets. The module is easily configured using either th
4140008532138
20007572479
008214865
, 150545, 20832, 23261, 81052, 81505, 81547, 4301855, 14291, 14993, 15980, 16723, 14897, 15977, 16516, 19974, 2
15907. With hoses, pictured.
e. NSN 4030013841968
815003186632
HP @ 900 RPM. LH rotation engine. 16-567ED3A / 73C31503. EMD Turbo part no. 8296473, serial no. 8483-6007 / 3T18
ves. New in box, 24 available. Electro Motive Division, General Motors. Also available rebuilt <a href="http://www.surpl
ocker arm. NSN 2815-00-093-5697, 2815000935697, 2815 00 093 5697.
that has been upgraded to run on 645 packs. NSN 2910014223651. 8 available.
General Motors Parts.
90 ea available. NSN 2910003538425
available. NSN 2815006003257
ection. 2 ea available.
VAC 1 phase, 10A. Item ID 05088-C703925218. 6 ea available. NSN 2090004750142.
nt no 1739040. Separator Canister part no. 050505-01. Go-No-Go element no. 041420-M1. Capacity 150 PSI, 20 GPM.
3 ea available. NSN 2910009309367
ew, unused. Several available.
meter: 130 mm, 5.1181 in. Width: 22 mm,0.8661 in. National Stock no. 311-00-555-5423, 3110005555423, 311 00 555
4 inch discharge. Part no. 16604085, 16608974. Military part no. C603AFBAHC. NSN 4320008780463
SN 3110001005825
ng and flywheel Marine Exhaust Manifold Block casting #E6NN6015 engine does not turn over
ng and flywheel Marine Exhaust Manifold Block casting #E6NN6015 engine turns over $650.00
only), WITHOUT POWER WINDOWS DOORS (only)
NSN 2805011158428
water. Complete with EEC module. With ZF / Hurth gear, model no. HSW-800 A2 - 2.5. 2.5:1 ratio.
5000; (1965 to 1975); 8000, (1968 to 7-1976) 8000,8200,8600,(1968 to 7-1976). NSN 2815000624015
sensor. Senses teeth on flywheel, generating signal for speed controller. New in box.
p. Rebuildable core.
Rebuildable core, as pictured.
t no. R5103837.
no. DB2205-4.
01152 10501153 10501154 10501155 10501156 10501157 10501158 10501914 10501927 10513409 10513414 105134
611. 2 ea available. NSN 2520011151545
x. General Dynamics Land Systems
0Hz. New, slight rusting from storage on puley, frame.
4 each in stock
7155031. 9 ea available.
NSN 5925013428901
25001141421
Quantity available.
ew, unused.
e. 35 ea available.
7 ea available.
202 each in stock
e. 43 ea available.
910000072178
otors EMD. Distributed by Hatch and Kirk. New. NSN 2815003463416.
8700 LW9511-1-4. Distributed by Hatch and Kirk. New. NSN 2815003860824.
88, 7 inch OD, 2 1/8 inch ID.
14061698I. Chevrolet Blazer, Truck, GMC Jimmy, Truck with 379CID V-8 Diesel, 6.2L. 1982-1991. NSN 2930-01-353-57
5.7L. 3 ea available. NSN 2805013897671
5. Type B, class 1. Part no. 8533307, serial no. 1-59100. Contract no. N00104-70-A-0008. Max pressure 300 PSI case
ate 6-84 pole 3 volts AC Serial NO15084, Overhauled by Mare Island Naval Island Naval Shipyard Circuit Breaker Facility D
cu-Break Switch with Clampmatic Contacts CATf-325H
cu-Break Switch with Clampmatic Contacts CATf-325H
3 Serial #0021 Complete unit with cable guide, brake, and tension control
servo. Typically used as an engine fuel control positioning device. Can operate directly on 12, 24, or 32 VDC. Application
ps, creating an integrated proportional servo fuel package. Sealed components and no sliding parts. Currently available fo
servo. Typically used as an engine fuel control positioning device. Can operate directly on 12, 24, or 32 VDC. Applications
eries fuel injection pump in place of mechanical governor. With external fuel shut-off and adjustable internal max fuel lim
Coupling the 275 Series with a fuel pump results in a high performance fuel control system without external linkages or b
mps. Coupling the 295 series with a fuel pump results in a high performance fuel control system without external linkages
ric servo designed for mechanical actuation of fuel system control levers requiring torques in the 5 lb-ft range. the actuat
electric fruel metering servo for use on Cuimmins engines with PT fuel systems. Energized by signals from a speed contr
ne "D" series fuel injection pumps. No external linkage or brackets are required, and no extra Stanadyne parts are neede
Diesel Engine.
strainers. NSN 204000826001
NSN 3040013826490
urability and extra corrosion resistance. Aluminum piston and nylon bearings provide maximum guidance stability that diff
ers 2109239 CPN-8440236 .03-02-06, P1-G2020W-8E9T9T-11B61-S78 2 each available
4326, 2825003174326, 2825 00 317 4326. New, in box.
N 2815000748916
15, 30kw gensets, MEP004A, MEP005A. NSN 6115001181241, 6115001181241. NSN 2815009611635
le. also have new pump available, <a href="http://www.surplusman.com/detail.php?itemid=1398" target=
Used, as pictured.
ailable. Also available used, <a href="http://www.surplusman.com/detail.php?itemid=308" target="_self">(click here)</
ictured. Several available.
750C, spacer part no. 288728B. National stsock no. 2815-00-477-6001. Used, as pictured.
d condition.
1002B Quincy Air Compressor Model #W5120 Serial #369405 High volume air compressor for dive station Hydraulic valve
xcellent condition.
sed, in like new condition.
008567092. 11 available.
1 ratio, style A. NSN 2520-01-344-9423, 2520013449423, 2520 01 344 9423. 1 inch diameter input and output shafts. N
pressure. New in box, 3 ea available. NSN 2990-01-153-1332, 2990011531332, 2990 01 153 1332.
1800144. 12 tooth pinion, 150 PSI max. New, 9 ea available. NSN 2990013825719
ter with engine driven hydraulic pump, manual pump. Ideal for operation in hazardous locations 116 Hrs on unit. Serial n
rter with engine driven hydraulic pump, manual pump. Ideal for operation in hazardous locations 208 Hrs on unit Serial n
ea available.
90014771692, 2990 01 477 1692. Several available.
C2. 24V starter and alternator. SAE 3 - 11.5 bell housing and flywheel. Core engine.
o 2 trip speed 590-610 rpm, no 3 1200-1225 rpm. Part no. 36024-LDW-72-2203-1
e side rated at 150 PSI, 400 deg F. Tube side inlet and outlet have 5" 150 standard flange ends, with 5" and 3" threaded
Test pressure shell side, 150 psi, tube side 270 psi. 1 1/2 inch full face flange tube side, 1" shell side. Weight 85 lbs, LO
s, Iveco marine engines, Massey Furgeson tractors, others. NSN 2920011871099
Marine diesel engine set up for heat exchanger cooling. Broken crankshaft, but engine still turns. Missing starter, altern
Problem in injector pump. Marine diesel engine set up for heat exchanger cooling. Fiat Iveco 8061. Serial no. 806425-05
Needs head gasket. Ran well, 65 lbs oil press. Marine diesel engine set up for heat exchanger cooling. Fiat Iveco. Variou
7841. Dimensions: 5" diameter, 4" deep, 1 1/4" shaft diameter. New in box, 6 available.
10, 2520, 2630, 3010 GAS, LP GAS S/N 091618>, 3020 GAS, LP GAS S/N 091618>, 402. 14 kits available.
t NR-50410. Shaft, mechanical seal and ceramic housing.
030, 2520, 3020 (From SN 123000), 4000, 4020, 1230 GAS 820, 830, 1020, 1520, 1530, 2020, 2030, 2150, 2155, 2255
cludes impeller, shaft, all bearings and seals. Used pump also available. <a href="http://www.surplusman.com/Detail.php
h hose barb.
440, 4450, 4520, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430 M
9, 4.239 engine 4 cylinder, short nose and fits 2020, 2030, 2440, 2120, 2130, 2140, 2510, 2520, 1640, 1840, 2040, 450
320R. As-is
ets available.
5, 3110001556515, 3110 00 155 6515. $50.00 each New in box, quantity available.(60)
09, AR74144, AR100384, R71529, R71530, R71531 R78316, R77259, R59420, R61150, R64086 Fits: 6.404 and 6.466 En
, 5820 W/ 6619AE-02 Eng. SN <048542, 6619, 860B, 862, 862B Eng. SN 040932 Thru 499999, 8630 W/ 6619AE-02 Eng
ne control module 12 volt used on 6081AFM engines with option CODES 1601, 1603 and 1607. Replaces old part #'s RE5
20; R47110 Rod# R41423; R58882; R66922 6-Cylinder Kits 6-Connecting Rod Bearing Sets 6-Main Bearings 1-Thrust Be
onnecting Rod Bearings 6-Main Bearings 1-Thrust Bearings 1-Thrust Washer Set 1-Head Gasket Set 1-Lower Gasket Set 1
& up) 2150 (prior to s/n 704045) 2155 (prior to s/n 751023) 2240 (s/n 350000 & up) 2255 (prior to s/n 70404
t no. R501242.
y. AR55617 New John Deere JD Tractor Water Pump w/ IMP Kit 3010 3020 4010 4020
<a href="http://www.surplusman.com/Detail.php?itemid=2915"_self">(click here)</a>.
014080762
for longest life by Seakamp Engineering. 4 ea available
RE501133 Pulley R99590 Cover RE64442 Tensioner
ines 2350, 2355, 2550, 2755, 2855N (2150, 2255 all SN< 704045), 2155 SN < 743474, 2750 w/ AC.
ulley. For diesel engines. Tractors: 820 830 1020 1520 1530 2020 2030 2040 (prior to s/n 349999) 2240 (prior to s/n 349
or 4 cylinder 254 CID 4 cylinder 270 CID 4 cylinder 227 CID 6 cylinder 301 CID 6 cylinder 381 CID 6 cylinder 340 CID dies
Casting no. R124850. For 4039T engine. Cosmoline coated, crated, ready to ship.
(STD) used on 6081AFM and 6081AFM75. Marked R502125 and R502126. Replaces old RE504195. 6 sets available.
. New take-off.
57, cylinder liner kits PN NAR71593. For 164, 219, 329 early style.
310, 310A, 310B, 310C, 310D, 315D, 401C, 410, 410B. NSN 2520010197489
, cylinder kit part no. NRE 23165. For early 270 engines.
8MM. 3 ea available.
engines. 13 ea available.
9. Impeller turns.
. 3166-1188, serial no. ADIC4368-CJD. 12 lead re-connectable. 60 HZ @ 1800 RPM. Marine exhaust manifold, 12V start
no. AR97088. Core engine, does not turn over. No injection pump, basic long block core.
M 300 Series and 6068DFM 300 Series(code 6403 and 6404) marked R109150, 4045DFM50 and 4045DFM70 (code 6415)
no. 228000-6532
en type. 3 of each type available.
o. 10139131. For 4045 engines.
d 6068TFM76. Replaces part numbers RE505112 and RE65969. Pistons marked RE55512, RE505102 or RE509540. Kit i
FM75 (code 6858) and 6068TFM50 (code 6571 and 65JD). Marked RE502642. Water cooled. Good used.
FM70 and 4045TFM75
r used, in excellent condition. fits 4045T engines.
ne Engines.
rsize 4045TFM 300 Series Marine Engines. Also used on 6068TFM and 6068DFM 300 Series Engines. Quantity available.
4450, 4650, 4850, and 8450 with 4.56 inch bore with 466 T. A Diesel Engine with Engine Serial Number from 253,373 for
d Bearings 6-Main Bearings 1-Thrust Bearing 1-Thrust Washer Set 6-Connecting Rod Honable Bushings 4-Camshaft Bushin
Bearings 6-Main Bearings 1-Thrust Bearing 1-Thrust Washer Set 6-Connecting Rod Honable Bushings 4-Camshaft Bushin
ea available.
00 RPM. 0 hrs on rebuild. Out of 10,000 lb boom type forklift. SAE 3 bell housing and flywheel. No alternator. 3 ea avai
0 RPM. 0 hrs on rebuild. Out of 10,000 lb boom type forklift. SAE 3 bell housing and flywheel. Missing turbo. 3 ea availab
0 RPM. 0 hrs on rebuild. No alternator. Out of 10,000 lb boom type forklift. SAE 3 bell housing and flywheel. 3 ea availab
076AFM30 Engines.
Quantity available.
6AFM30 engines. 5 sets available.
ines. 2 ea available.
2815014835845, 2815 01 483 5845. Cooling fan bent, damage to turbo impeller, exhaust side. Slack in turbo cartridge.
engines. Also available used.
h), bearing part no. RE22514, bushing part no. R112203. 3 ea available. For 6081 engines, option 5203. Also available h
portion used on 6081AFM and 6081AFM75 engines with option CODE 1346
4A, 164B, 164C and 164D. Replaces old part number RE518726 Fuel Injector 6081AFM75. Denso part no. 5150,
with special bell housing and idler gear. Housing part no. YZ10041. 3 ea available.
d under 1 hour.
ntity available.
0, 5820 W/ 6619AE-02 Eng. SN <048542, 6619, 860B, 862, 862B Eng. SN 040932 Thru 499999, 8630 W/ 6619AE-02 En
RE501010, and part no's RE509416, R134920, R135526, R503578, R131051, RG36904. Denso injector no. 0551 01F 02
RE518726, and part no's RE509416, R134920, R135526, R503578, R131051, RG36904. Denso part no. 5150 10H01076.
Serial no. 10336668. GAC ADC100 series electronic actuator.
no. 9585479. Missing top cover, needs work.
erial no. 10020682. 2600 RPM. Rebuildable core, also available rebuilt. For DB4.
ts ground -.010 6-Cylinder Kits 6-Connecting Rod Bearings 6-Main Bearings 1-Thrust Bearing 1-Thrust Washer Set 6-Conn
03. For 4045 engine. New in box. 2 ea available.
Pollak. John Deere part no. AR58126, universal applications. Comes with J. Deere keys PN AR51481.
o. 10080949. 1800 RPM. Available with or without Electronic actuator. 12VDC.
al no. 10959882. Electronic actuator GAC Model no. 96-23538, serial no. IBK83015. 1800 RPM
al no. 11095219. 1800 RPM. 2 ea available NSN 2910014768668.
-6545, 6115012346545, 6115 01 234 6545. Serial no. ASK-30. Kit weight 1426 lbs. Dimensions: 108.1L x 41.4w x 75.8
-6545, 6115012346545, 6115 01 234 6545. Serial no. ASK-30. Kit weight 1426 lbs. Dimensions: 108.1L x 41.4w x 75.8 h
3-8274, 6115012338274, 6115 01 233 8274. Serial no. ASK-15 Kit weight 1292 lbs. Dimensions: 98.1L x 41.4w x 75.8
construction. Test pressure 30 psi. Bu-ships drawing no. 805-162-3944. Part no. 805-1401891ASSYB. NSN 2040007533
800 RPM. 3 phase 208-240/416-480 VAC Wye, 120-139/240-277 VAC Delta. 15kw single phase 120/240 VAC. 50V excit
RPM, 120/206, 240/416 VAC 3 phase, 12 lead. Delco Drive. Includes instrument panel pictured.
ial no. 61070-2-G, model no. 500 SR9D. Brushless exciter model 65JL4G, 6500W, type 12286 45V. Balser SSR63-12 Vo
el 500sx90, serial 60740143, type 12482, temp 70 c rise, brushless exciter model 5JL4G, type 12484, 60 volts, 5000 watt
design no 16330, serial 67066, temp rise 70C, brushless. 350 hours total time.
0802-3. 10 KW continuous rated, 60HZ at 3600 RPM. Shaft drive.
SN 2520013489542
2990014962353
deg F. comes with mounting hardware, instruction manual. 3 ea available. NSN 2990008113535
m up time. Model no. 3P50, catalogue no. C5033-050. 5000 watts, 240 VAC 3 phase. Comes with magnetic contactor mod
rm up time. Model no. 3P50, catalogue no. C5033-050. 5000 watts, 240 VAC 3 phase. Comes with magnetic contactor m
166 fpm Powered by hydraulic gear motor through a 33:1 double stage planetary. With automatic disc static brake.
-CC-05-2, Kinematics Manufacturing, KMI Inc. New
e. NSN 2940004355394
, 480 / 240 VAC 12 lead reconnectable, Manufactured 1997.
5-00-842-0859, 2815008420859, 2815 00 842 0859. New, in box. 13 available.
y available. NSN 2815008748677
-00-083-8021, 3020000838021, 3020 00 083 8021
6184, 5109953, 5116188. 175 sets available. Made by Korody Colyer. NSN 2815008905019
ck no. 2815-00-273-0428, 2815002730428, 2815 00 273 0428. 2 available
0015030865
no. 1N5733. 722 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. 24 avai
. 1Y4276. 680 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. 25 available
. 2L4569. 1492 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. 25 availabl
. 2Q2177. 682 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. 25 availabl
. 1Y4905. 552 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. 25 available
. 2L5250. 806 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several ava
. 1Q5281. 748 Hours. Special Oil pan allows for slant style installation for low profile applications. No Motor Mounts, no
. 1Y4570. 1198 Hours. Special Oil pan allows for slant style installation for low profile applications. No Motor Mounts, no h
. 1Q4060. 478 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several av
. not available. 527 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Sever
. 1Y4850, 1357 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several av
. YG6915. 480 Hours. Special Oil pan allows for slant style installation for low profile applications. No Motor Mounts, seve
. 1Y4855. 425 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several ava
. 2Q2551. 443 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several av
.3C1456. 324 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several ava
. 2S4690. 324 Hours. Oil pan allows for slant style installation for low profile applications. No motor mounts, no heat sh
.1Q4046. 28 Hours. Special mounts and oil pan allows for slant style installation for low profile applications. Several avail
. 1Q4655. 137 Hours. Oil pan allows for slant style installation for low profile applications. No motor mounts, no heat shie
t no. KK3866. NSN 3040013796359
hertz, DC amps 40, DC volts 24, no cells: 12, type cell: L. Dimensions:25"L x 26 1/2"H x 12"W. 2 ea. available
6.0869.2.00
RZJ01277. 643 hours. Powered by John Deere 6059T diesel engine. 43 gallon fuel tank. Note burned wires going to cu
nsions 108X42X76H, weight 1426 lbs. Missing stacks for intake and exhaust. Made by Libby Mfg Company
sions 108X42X76H, weight 1426 lbs. made by Libby Mfg Company
M. 12 lead reconnectable.
800 RPM. 12 lead re-connectable. Type SER-R
730012676985
n box. NSN 3020-00-223-2703, 3020002232703, 3020 00 223 2703.
2910000180290
de by Lockheed
. 21479LCG
does not turn. Off of 4 cylinder Bedford Diesel
509950, 2910 01 150 9950. Several available.
0900046GH. Serial no. 79L700-5-1890
60 hz @ 1800 RPM. 3 phase 120 / 208 VAC. VR no. 761426-01. SAE 1 housing.
86-7305, serial no. 8VA-429990. Magna generator model no. 682FDR8204-L282 W, serial no. ML-3020485. 60 hz @ 180
ept 348, 409, Tall block engines. Installed once, engines never turned over. 2 wire breakerless ignition module. Includes
D2848LE Engine
ll or part. Intercooler 6.0869.2.00, Heat exchanger 40190.2.35. Bosch Injection pump PL8P120A520/4LS3934, 6461783
(see picture) left side.
PT connections
Range 0.25-0.50 Inches, Capacity Range 1150-2300 Pounds, Bolt Diameter 1/2 Inches, Cap Screw Diameter 1/2 x 1 Inche
5210. New, unused.
, 6 ea available. NSN 4320004044835
casting no. 636015070. Unit does not turn over. 12V starter and alternator, heat exchanger cooled. With Paragon manu
. NSN 2990012443389
e. NSN 2530011050069
10013995280
standard.020 bore. Prestolikte waterproof ignition system part no. 1DA440401, serial no. 868. 24 volt, cap broken. As is
10642, 6758707, 8357328, 8355950, 442935. For Transmission assembly XTG-411-2A NSN 2520000459852.
2 sets ea available.
730004565938.
UNF. Rated 250 PSI W.P. 27 ea available. Military part no. ZZ-H-461. NSN 4720000929265.
720013405840
30015554781
4540; FITTING P/N 8744539; CAP P/N 8744536. Several available. NSN 4330005663816
. 5R363507, serial no. 49S00900. 12 lead re-connectasble with re-connect board. 3 phase, 50 - 60 hz. Missing starter, O
late 11664387 NSN 2520001070027 Pilot Bearing 700070 NSN 3110001448637 Release Brng 7348742 NSN 3110001865
motor 34-5104-3226.
cal replenishments. Filter NSN 4330011286277. Kit NSN 6850014231698. Several Kits available.
SN 4820000361393
1. NSN 2590014432208
1849, 2930006781849, 2930 00 678 1849.
resh water sources to potable water. Model WPES2-TYPE II, serial no. WPES2-8270. This unit was refubished by the milit
943679, DJID W81LG662341729
witzer part no. 914134. NSN 2930001130768
NSN 2990013829756
NSN 2990013725721
able. Military Morse part no. 301947-003-02640. 6 ea available. NSN 2990013830880, 2990013725721, 29900138308
S Single SR or Twin SR two lever controls. Recommended where long or difficult cable paths make parallel installations co
INCHES NOMINAL MOUNTING HOLE DIAMETER 1.000 INCHES NOMINAL PERFORMANCE TYPE LIGHT DUTY FACE WID
822410.00.01. Supply 12-36VDC, output 4-20mA. NSN 6620-12-340-6332, 6620123406332, 6620 12 340 6332.
no. 1.6110.
available. NSN 2815011687871 for M998 A1 HUMMER OIL PUMP AND SCREEN 23502073 5740541 NOS
, visual monitor. Simple and effective, one wire to ground protection against low oil level or high level caused by overfill, o
Model no. D 327-3, Spec #300451. 2600 RPM. No starter, no exhaust manifold. Urbooraft reduction box, Twin Disc PTO
eg F. Connections for Normally open, Normally closed positions. 2 ea available.
HP at 2200 RPM, 14 HP max. Serial no. 91003817. Hand crank start with compression release. Radiator cooled. Comes
SN 2530011837326
. Impeller missing from air side. Off of Star Powr Power Stroke 7.4L marine engine.
-01-153-9035, 2930011539035, 2930 01 153 9035. New
possible to duct the now clean blow-by fumes into the air cleaner for a completely closed system, removing 100% of the b
5963014572273
41. 231 KVA. 60 hz 3 phase @1800 RPM. Good running take-out. SAE 1 housing.
NSN 2825001460131
excellent condition.
ntinuous, 3500 psi max. 9.5 GPM.
tio 1.47 to 1 Reverse Ratio 1.96 to 1, Model 101, serial 75997, v9057gr
2-0326 secondary fuel filter 122-0185 oil filter 140-1907 air filter element 123-1871 filter 123-0315 breather check valve
ed Technologies Springfield, MA fits US Military generator sets Model MEP-003A and MEP-002A NSN 6115-00-466-1030
ea available.
910 01 275 1715. 4 ea available.
ase, 120-240 VAC single phase, 120-208 VAC 3 phase. Generator end assembly no. 72-5200, NSN 6115010386728. To
owered by Onan air cooled 2 cyl motor, model no. DJM60-MS113239, serial no. 570957311. 12V starter. Frame mounted
tarter, SAE 6 Bell housing /w 5 sheave (sp?) 6 3/4" diameter pulley for belt drive
nes. 207 sets available. NSN 2815011651211
N 2920013689140
003A. 120 / 240 VAC 1 phase, 120 / 208 3 phase, phase and voltage selector switch. 24 V starter and alternator. 60 hz. W
SN 2815010488705. Alternate part no. 154-1358-01
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 517 hrs on unit. Unit turns over, does not run. Suspect bad inj
o. C960599854. 120 VAC single phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 2347 hrs on unit. Unit does not
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 1635 hrs on unit. Unit has been test run, runs good. produces
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 10 hrs on unit. Unit has been test run, runs good. produces po
air cooled genset. 8 ea available. NSN 2540012759002
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 10 hrs on unit. Several available. NSN 6115004561044
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 5492 hrs on unit. Unit turns over, does not run. Suspect bad
VAC single phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3498 hrs on unit. Unit turns over, appears complete
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 226 hrs on unit. Unit turns over, appears complete. Several av
phase, 120/240 VAC single phase, 120/208 VAC 3 phase. 1968 hours on unit. Unit turns over, appears complete. NSN
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 151 hrs on unit. Unit turns over, appears complete. Several av
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 281 hrs on unit. Unit turns over, appears complete. Several a
. 2 complete sets available, 2 ea also for #2 cylinder
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 2351 hrs on unit. Unit turns over, appears complete. Several a
VAC single phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 608 hrs on unit. Unit has been test run, works well,
hase, 120/240 VAC single phase, 120/208 VAC 3 phase. 1544 hours on unit. Test ran ok, NSN 6115004561044
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. Unit has been test run, runs good, produces power. NSN 61
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 4448 hours. Missing phase selector switch knob. Unit turns ov
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 949 hrs on unit. Unit turns over, appears complete. Several
e phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3084 hrs. Unit turns over. Needs work, not running. NSN 611
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3011 hrs on unit. Unit turns over, but does not run. suspect
SN 2815010488705. Alternate part no. 154-1358-01. Includes glow plugs pictured.
003A. Serial no. RZ00552. 4035 hours on hit. 120 / 240 VAC 1 phase, 120 / 208 3 phase, phase and voltage selector s
phase, 120/240 VAC single phase, 120/208 VAC 3 phase. 2064 hours on unit. Missing starter, battery gauge, some air lo
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3886 hrs on unit. In sound enclosure, Acoustic Suppression
ngle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3428 hrs on unit. Unit turns over, appears complete. Weig
AC single phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 3557 hours. Motor runs, Frequency Meter pegs out, vo
gle phase, 120-240 VAC single phase, 120-208 VAC 3 phase. 4648 hrs on unit. Test ran, ready to go. Weight, 1220 lbs. D
r cooled gensets model MEP-003A, MEP-002A. New, 9 ea available. NSN 2910008695668
phase, 120/240 VAC single phase, 120/208 VAC 3 phase. 2426 hours on unit. Missing starter, battery gauge, oil pressure
phase, 120/240 VAC single phase, 120/208 VAC 3 phase. Missing starter, battery gauge, charge gauge, frequency gauge,
0514 (1983), 150 amp, 480 VAC, 50/60 hz, 3 pole
020012299770
ialble. New. NSN 4730015152115
t a number of flows or pressure through a single valve. The flow is controlled by the rotation of a ported ball within a suita
, internals 316L stainless steel. PN MP-H-17-1.
onze impeller with drive ring, By Peabody / Barnes. Serial #US6018351-060. Surplus can be used for water or also used by
mp turns, as-is
o. NSN 2815000530430
. NSN 2815013237668
with L.O.L. sensor / switch, as pictured below, right. Model no. PRE-4. 24 VDC.
7.4L Power Stroke Marine engine. 19 inches LOA, 1 1/2 inch hose connection tube side, 3/4 inch NPT fittings shell side. 4
. 3900279M1. 3 ea available.
, 2 right side.
available, one missing end pieces.
NSN 2910011458261
No part no. available. 10 ea available.
ows and 502 Magnum EFI with stainless steel elbows. Part no. 93322A-6. Includes all brackets, gaskets and mounting ha
compressor for dive station,Hydraulic Valve loaders, cut in @ 225 psi, cut out @ 250 psi, Fresh water cooled w/salt water
2 ea available, note different wrist pin retainer style
ow 10 CFM/300L/m.
AT 3512 1200 rpm, rated 1060 hp at 1200 rpm, two available Call for Detials
53716. Connecting Rod Assembly 4045TFM 300 Series Marine Engines. Also used on 6068TFM and 6068DFM 300 Series
. CS653A1. National Sock No. 4420-00-937-5901, 4420009375901, 4420 00 937 5901. LOA 36 inch, 4 1/4inch dia, 281/
130014830560
motor. Serial no. 01088706. NSN 4310010088184
AR52020, AR63698, AR70987, AR68139. Switzer part no. 196062, model no. 3LM-259, serial no. B2894 010 R9. New,
model no. 3LM-299. Serial no. C0996 033 R9. New, in box. For Models: 4250, 4350, 4440, 4440 (Eng. SN: 027605>),
wer. Teco 20HP 3 phase 60hz motor. Type ASFA, 230/460 VAC. 3520 RPM.
c no. 34A63-255. 208-230/460 VAC. Scot model 71 centrifugal pump. 1.25x.75 BN-CN seal, 4.70 dia impeller. New. NS
motor. Powerful medium duty disintegrator. Model 22 provides high volume destruction with up to 1,200lbs /hr and minim
6 inch sheave.
type JXD6-A
050/1185/0. Baldor 3 phase motor, Cat. no. 330-4581-000, Spec no. 35F613-85. 1/2 HP 208-230/408 VAC, 1425/1725
540004518777
Control power 120 VAC internal transformer. serial no. 35399-99-42.
Y WEAPONS SYSTEM LEFT HAND;MATL,"COML";COLOR BLACK;54.500 IN. L,27.180 IN. W,0.090 IN. THK. Several availab
SE VEHICLE (JERRV) 4X4 EOD VARIANT. 30 kits available. NSN 2590015502112
R. NSN 5925010059384
2520015433724
2910011891748
Military Gen Sets MEP-005A, MEP-104A, MEP-114A, 6115-00-118-1240, 6115-00-118-1247, 6115-00-118-1248, 2910-0
G0248. Allis Chalmers Military 60kw gensets MEP006. 8 ea available. NSN 2910011616536
2200 RPM. 4 ea available. NSN 2910011539014
Off of Johyn Deere 6059T Generator Drive engine. NSN 2910014768971
601, serial no. 10853397. 1800 RPM. Rebuilt
button. 12A continuous 125VAC inductive.
M 88-93 AND 89-91 ISUZU TROOPERS WITH 2.8 TBI "R' LL2 ENGINES WITH AUTO TRANSMISSIONS. RE-MANUFACTURED
Military Gen Sets MEP-004A, MEP-103A, MEP-113A, 6115-00-118-1241, 6115-00-118-1245, 6115-00-118-1244, 2910-0
0 VAC 1 phase, 52A. Model 5KWCTMGSA, serial no. 6900656. Dimensions: 56x27x55, weight 750 lbs. As is.
nly. 0-3000 RPM.
et and outlet, no channel heads. 12 available, 10 new, 2 used. NSN 2520012489566
ble, one with drive shaft. As pictured. NSN 6680001258541
AR52020, AR63698, AR70987, AR68139. Switzer part no. 196062R, model no. 3LM-259
a-Tech part no. 072518006, mfr number 7189. 8 ea available. NSN 2930015344641
5 00 91 0483. Made by Thermal Engineering International. New in box, 2 ea available.
975003723734
no. 967. 115V, 50/60 hz, 2.8A.
001005303
generator set applications. The Battery Charging Regulator has a variable charge rate of between 10 Amperes minimum t
34586 unused
Pieces broken in housing at mounting bolt holes 2 places, but still usable. Rebuilt.
-C, BOM no N-62422. Serial no. 5EH015. NSN 2520-00-001-8292, 2520000018292, 25520 00 001 8292. New in crate,
engine application <a href="http://surplusman.com/Detail.php?itemid=6773"_self">(click here)</a>.
no. 5164464.
274372. Specific Torque 230. Available with Detroit Diesel 71 series SAE 1 flywheel.
2, Spec no. 34073. SAE 3.
n Disc X8708 "crash box" flywheel. Exchange X8708 transmission for MG 509 transmission without changing flywheel Part
NSN 3010013492357
off. Were installed but not used, inproper ratio for application. Excellent condition.
M no. 34983, serial no. 3E7502. 4 ea available, 3 rebuilt, 1 low hour running take-out. NSN 2520-01-018-0525, 2520010
ed and rebuilt
O. 2 ea available.
E 1 housing. Good RTO.
der Piston XA7334 Cylinder
g, owners manual. Serial no. 5HT016, BOM no. 37144. NSN 3010010636234.
owners manual. Serial no. 5HT858, BOM no. 37144. NSN 3010010636234.
owners manual. Serial no. 5HJ783, BOM no. 37092. NSN 3010010636234.
owners manual. Serial no. 5HR986, cust no. 37092. NSN 3010010636234.
owners manual. Serial no. 5HT020, BOM no. 37144. 3 ea available. NSN 3010010636234.
Drive part no. P10532. Excellent low hour running take-out
t running take-out. A7303-A, A7273, A7302, A7300, A7296. Needs dipstick PN A4969Z
ns. Has one chipped tooth. With or without shaft and bearings, as pictured. Mate to pinion shaft PN B6049.
t very low hour RTO.
5 ea available.
vailable. Comes with all fittings pictured. Shell side 1 1/2" NPT, tube side 1" NPT. 27" LOA x 5" dia.
ne gear. reduction 5 to 1
7, mg 527, Twin Disc Marine Transmission, marine gear. reduction 5.17 to 1. Spec no. 32031, serial no. 347078. SAE 0
ne gear. reduction 5 to 1
V-149. 2 ea available.
ea available.
rated 900 hp @2300 rpm. Ratio 1.97 to 1 SAE 1 includes drive ring and companion flange. Unit is rebuilt and was used
lectronic shifter. Complete with oil cooler, mounting bracket and mounting bolts. 2 ea available, SN's 5JW187, 5JW188.
e plate drive. Includes drive ring and bearing. NSN 2990-00-933-2954, 2990009332954, 2990 00 933 2954.
SAE 1. With drive ring. In good condition
l 3J2002 with Hydraulic Torque Converter, model 8FLWB17011 spec 64770 serial 3J2365 torque 335, 200 hours
2 ea avaialble
condition. Reverse shaft, forward sleeve and clutch assembly need work. As pictured.
rt no. 8764. Surplus new, unused.
gine application <a href="http://surplusman.com/Detail.php?itemid=6766"_self">(click here)</a>.
4580206, 2010 00 458 0206. Surplus new.
aft. Part no. A-5372-A. Used, in excellent condition. 9 ea available.
ear. Used, in excellent condition.
For X8708 "Crash Box" 1.5:1 marine gear.
2" diameter with 6 1/2" raised face flange, six bolt pattern, 6 1/2" across bolt holes. In excellent condition. Part no. X9804
Serial no. 9A0583. Customer no. 23990184, BOM no. 39759. SAE 0. 2400 horsepower @ 2100 RPM. Running take-out, in
AE 0 Housing.
ater. Portabable skid mounted. 600 GPH, 4610-01-093-2380, 4610-01-113-8651. For more info, <a href="http://www.su
on, Seawater to drinking water. Portabable skid mounted. 600 GPH, 4610-01-093-2380, 4610-01-113-8651. Univox seria
meter. Small end 4 ea 3/8x18 threaded holes 4 3/4 inch diameter. Mounted on 2 1/2" keyed shaft. 7 1/2 inches long
suction, 3/4 inch discharge. Packing gland type seal, pedestal mount. All bronze construction. Belt driven, 4 inch sheav
ter 11 inch. Shoulder length 8 inches. Accepts 4 inch shaft. Used, in good condition.
Bolt pattern 10 3/4 inch diameter, 6 bolt pattern. Shaft collar 8 1/2 inches deep. Matches up to this coupling flange: <a
attern 7 1/2 inch diameter, 8 bolt pattern. Shaft collar 6 inches deep. Part no. A924M
tud 9 1/2". With adjusting nuts and lock nuts. Hard rubber mounted. 6 1/2" between base securing holes. 4 available.
everal available.
558. New, several available.
7, 2815 00 364 3827. 4 available.
-273-0427, 2815 00 273 0427, 2815002730427. 14 available.
alt water, brackish water, impure fresh water sources to potable water. Completely refurbished units available, with all pu
2540014245328
no. 960751. 10 ea available. NSN 2530012370221
910012016872
3. SAE 1 bell housing and flywheel. 24V starter and generator. 162 HP @ 2200 RPM. Low hour (4000hr) running take-ou
sed, 4 ea available.
holes. 4 ea available.
Seal size 24 1/2 inch. Seal type M9. NSN 2010-01-252-3615, 2010012523615.
0007529407
mvd 31a, 6327-000-11, 6327-000-1. NSN 3010001481041. Reduction 1.5 to 1. New, 12 ea available. Used in U.S. Navy
NSN 2815012971396
60 hz, 20 HP motor. Control panel missing. 3 phase Motor turns at 1675 RPM to a large speed reducer.Rated at 20,000 LB
NSN 2825003886933
653J854G01, serial no. 429-S-65. NSN 6115-00-077-8600, FSN 6115-077-8600. No fuel tank. As pictured.
40-3045301C. Off of Milkitary 15, 30 KW gensets MEP-004A, MEP005A MEP-103A, MEP-113A, MEP114A. Several availa
SN 2920012857164
o. 4385173. As-is
2990000365990
available, used.
ation 376061 part number 376104 (also have rebuilt units). NSN 2990001332309
ernor RPM 600 - 300. 125V AC / DC motor.
d 465-1100 RPM. control Air pressure 3-15 PSI NSN 2910014814014
rol air pressure, serial 1851509324, NSN 2990011442979
d by Woodward. 2 ea available.
6. Caterpillar part no. 5R-2462. Replaces part no. 8510-232. Taken off of very low hour unit, in excellent condition.
PM. 115 volt
075-1650. Rebuilt.
009048732. 3 a available.
Onan. Fits Military air cooled gensets model MEP-003A, MEP-002A. NSN 2910008695668
593. Max operating pressures: Shell: 250 psi, Tube: 150 psi. Max operating temp 350 psi. shell fittings 1" pipe, tube side
off of 500 kw CAT d398 gen set. 2 each available
r. 1 7/16" manifold flange, 2" air intake. Mounting bolt holes 2 3/4" at centers. Single venturi. New, as pictured.
Missing flywheel drive ring and line to selector valve. Rated 1486 hp @ 2300 rpm. Good used, two each available. Off of
no. TA127002. JLG part no. 8841042. 4 forward, 3 reverse gears. Drive for rear mount hydraulic pump. NSN 2520015
14. Rated 1486 hp @ 2300 rpm. Good used, two each available. Off of Detroit Diesel 16V-92TA. To view other gear, <a
n.com/Detail.php?itemid=6999"_self">(click here)</a>
2 ea available.
as been synonymous with quality, innovation, service and support. IPD has been involved in many areas of equipment rep
201-32-W3-R
res not available in other commercially offered valves. Available from stock in sizes from 1/2 in. to 4 in, CVI pipe–
) w/530 C.I. 6 Cyl. Eng. NSN 2910001003352
f">(click here)</a>
2-10"_self">(click here)</a>
7-1107-632-10"_self">(click here)</a>
/Search.php?searchterm=G127-1107-632-10"_self">(click here)</a>
ll all or part.
motor PN 005430-002, serial no. 1180038033. Will sell separately.
no. 1714517
quot;http://www.andersongreenwood.com/direct_spring.asp" target="_self">(click here)</a>
omputer centers, hospitals, airports, police and fire, etc. Allows for testing emergency systems under load without load int
or applications demanding instrument class accuracy and where pressure pulsations are less than 25 cycles per minute. Av
eceives its power for precise voltage regulation from a PMG (Permanent Magnet Generator), self excitation from the genera
ation which aids system block load pickup performance and controls excitation when operating below synchronous speed.
5-10. These environmentally rugged products are ideally suited for controlling the output of brushless excited synchronou
state buildup circuitry, and EMI filtering. Call for details.
tructed, and incorporates solid state technology with frequency compensation, automatic voltage build-up, overexcitation
and with or without paralleling provisions. Each model provides reliable performance due to its small, ruggedly construct
e, reliable, rugged, and cost effective package. Features include: Generator Metering/Engine Metering Genset Control Eng
0 VAC, 840 VA, 50/60 HZ 1 phase. Output, 63 VDC, 7A. New. NSN 6110002158584 SX.
tate technology with frequency compensation, automatic voltage build-up, and over-excitation shutdown as standard Inte
inch diameter, inner hub 5 1/4 inch diameter. 8 damper springs in hub. New, several available.
x, quantity available.
sions. 8 inch diameter, inner hub 6 1/4 inch diameter. 10 springs in hub. New, several available.
yle or other mounts.
H REMAN AL9959X CASE AR187873 CATERPILLAR 3E7285 CUMMINS 3604448RX, 392067 JOHN DEERE AT173624, AT220
tch diameters and power ranges. Incorporates Browning Split Taper Bushing - The only bushing system that provides a tru
ed rpm's. Because of the weather proof construction these cables can be mounted almost anywhere on your vehicle. .088"
self">(click here)</a>
man.com/detail.php?itemid=1282" target="_self">(click here)</a>
ete with clutch pack, SAE 2 Oil Dam Adapter. Dry weight 490 lbs.
.5 mm (12.933 in) 
Overall OD 491.5 mm (19.35 in). 20 micron. NSN 2940012060897
40. SAE 2 bell housing, no flywheel. Niehoff alternator PN 12420852RB with 12V and 24 VDC connections. Midland air co
nt running takeout.
using and flywheel. As pictured
rdware as pictured.
are as pictured.
manifold part no. 6N3727.
air compressor, model no. TP408, serial no. 33964. 600 CFM @ 100 PSI. USAF unit model no. 5M600, serial no. 431082
rice $750.00
up. Note Mounting feet on adapter housing cut off
E 1 belll housing and flywheel, front mount PTO drive. Includes gauge panel pictured.
ng pictured. LH exhaust manifold no longer available.
box, 5 ea available.
self">(click here)</a>.
s. In excellent condition.
15 01 317 7613.
n chamber assembly 8S3617 is required. 3/8" valve guides. 8 ea available.
ard UG8 governors. serial numbers 34J097 and 34J136. Bill of material number 3R5575-5. Cylinder block casting number
group no's: 3N5513 New part number 293-0009. 3N8893 8L5353 3N8892 3N8995 New in crate. NSN 2815-01-222-61
8, 1B9575, 7H3171, 9S4182, 1P1367, 9Y6860, 1B2790, 2P2537, 9M1974, 1D4540, 6N6985, 8M4432, 1A9579,0S1618 NS
/0101. NSN 3830-01-267-1354, 3830012671354, 3830 01 267 1354, New in box, Quantities available.
e 925 deg F. Voltage 28 - 32 VDC. Current - 1 Amp, resistive - 5 amps, conductive -.3 amp. New in box.
61"_self">(click here)</a>
Dowel (5/16"dia) ST-1241-7 Indicator Point The ST-1241 Plunger Protrusion Checking Tool is used to check the protrusion
M850 MCRS,QSK19G.
valve train, valve cover spacers. As-is, as pictured. Does not turn
>(click here)</a>. Housing part no. 2102796, Drive hub part no. 183439, Drive ring part no 8931. Vibration Damper part
4. 2 available.
Walker Air-Sep system. Includes Gauge Panel. Good running take-out. 2 ea available <a href="http://surplusman.com
System. Includes Gauge Panel. Good running take-out. 2 ea available <a href="http://surplusman.com/Detail.php?item
essors, engine and belt driven. Engine driven is a Bendix TU-FLO 500, part no. 276961, serial no. J1384R. Belt driven is B
03573. Detroit Diesel part no. 5108304. PTO SAE 0 housing, clutch 18-D. Rockford Assembly no. 4-18592, serial no. 844
p;145, 159, 160, 192, 193, 195, 196, 197, 198, 199, 200,
(click here)</a>.
elf">(click here)</a>.
sman.com/Search.php?searchterm=G118-1229-516-07"_self">(click here)</a>
lusman.com/Search.php?searchterm=G118-1229-516-07"_self">(click here)</a>
alternator. Woodward Hydraulic Governor, Det Diesel part no. 5108291. Self contained fuel tank. Rods, mains and bore
el no. 2151. No governor, unit does not turn over. Core, as is.
pears in good condition. No blower.
00 RPM. Basler APR63-5 voltage regulator, APM2000 Paralleling module. 130/225, 260/450 VVAC 3 phase.
del #5043-7201 No blower, no starter Woodward Hydraulic governor w/ radiator, skid mounted Unit turns over, engine up
2815011343484
205. Port height.84 inches. Group no. 1.6182. NSN 2815-01-076-3434, 2815010763434, 2815 01 076 3434. 47 ea av
http://www.surplusman.com/Detail.php?itemid=4887"_self">(click here)</a>
plusman.com/Detail.php?itemid=4886"_self">(click here)</a>
Model no 64-YTL. All internals have been Cosmoline coated. 2 valve head, GM 90 injectors.
casting 5194848 make offer
r alternator.
ww.surplusman.com/Search.php?searchterm=G136-6142-916-13"_self">(click here)</a>
136-6142-916-13"_self">(click here)</a>
136-6142-916-13"_self">(click here)</a>
136-6142-916-13"_self">(click here)</a>
ilable <a href="http://www.surplusman.com/Search.php?searchterm=G136-6142-916-13"_self">(click here)</a>
urplusman.com/Search.php?searchterm=G136-6142-916-13"_self">(click here)</a>
8" diameter Borg Warner drive plate. Adapter and drive plate for Borg Warner gear available.
sing, automotive flywheel, clutch and pressure plate. Core engine. Will part out. some part numbers: Turbo 5102353 Tu
not pictured. NSN 2815-01-251-9138, 281501251938, 2815 01 251 9138. In excellent condition.
y-Colyer, 2 ea available.
s engine (see photos). Crank sold.
model no. T-08A64. 32V starter and Leece Neville alternator (60 amp), type A0012126AA. One of matched pair.
"_self">(click here)</a>.
_self">(click here)</a>.
RPM. Tu-Flo air compressor part no. 8921208. 9A90 injectors. SAE 1 bell housing, no flywheel. 3 ea available. <a href=
PM. Tu-Flo air compressor part no. 8921208. 9A90 injectors. SAE 1 bell housing, no flywheel. Engine turns over well. NSN
PM. Tu-Flo air compressor part no. 8921208. 9A90 injectors. SAE 1 bell housing, no flywheel. 3 ea available. <a href="http
82. 17:1 CR turbo coach and bus engine, small port. New in box, large quantity available. NSN 2815-01-174-9346, 2815
ng take-out
o. D6-275. Tank part no. 5164516, Gray marine part no. D6-275.
racket 5176202.
et flanges PN 5167779 / 5167769, heat exchanger inlet and outlet flanges, PN 5167741 / 5167768, oil cooler line assmbly
housing. Port engine numbers not available. No starter. Keel cooled. Allison Dual Drive gear Serial no. HM10941, part no
53252, serial no. 14017. Will sell engine and trans separately. Engine rebuilt, then cosmoline coated.
configured using either the front panel buttons or our PC configurator software. The GSC300 provides direct mounting co
32 VDC. NSN 4810011513009
PE 1. NSN 2040011392782
0 Hz. Ampere Rating 97/88/44 Amp 60 Hz, 92/53/46 Amp 50 Hz. 25 hours on unit, in like new condition. Complete with
NSN 2815003538231
rial no. 8483-6007 / 3T18-S-N. Woodward PGA governor, model no. 8550143, serial no. 880666. 354-916 RPM. Very low
a href="http://www.surplusman.com/Detail.php?itemid=4920"_self">(click here)</a>.
NSN 2815012335320
.062 IN. LG; 4.335 IN. LG;1.565 IN. THK FLANGE;2 MTG HOLES THRU FLANGE 0.817 IN. DIA;5.500 IN. C TO C;2.485 IN
ax pressure 300 PSI case, 165 psi core. CID no. 030080513. Replaces model no. HE2524-365, part no. 8502115. New,
5 lb-ft range. the actuator is energized by appropriate speed control unit signals, and is capable of 35 degrees of rotation
ignals from a speed control unit, this actuator is capable of delivering fuel at rates up to 1700 lbs/hr. Design is totally sea
tanadyne parts are needed. when de-energized, the ADC functions as a fuel shut-off solenoid.
n and designed for high temperature operation. Uses linear ball bearings instead of bushings.
es fast response and proven reliability to allow for efficient and precise control. The ATB Series Actuator directly drives th
olution that withstands the rough environments and conditions found in various industrial engine applications. BEC 100 sta
m that needs flexibility, precision, or accurate control of governed speed. The EDG is designed for industrial engine applica
m is a suitable replacement for any mechanical governor system that needs flexibility, precision, or accurate control of gov
h reliability and simplicity of installation and adjustment. Hard potted design will withstand the engine environment. 12 or
ontrol, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a
loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will con
ontrol, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a
loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will con
h electronically and mechanically controlled engines, is ruggedly constructed with simple-to-use microprocessor technology
r to switch between automatic and manual particulate regeneration. Harsh applications are no match for JDR's rugged de
is the correctly sized servo device for this application.
ate within a temperature range of -65°F to 225°F (-55°C to 105°C). Thread Size Options 3/8-24 UNF
guidance stability that diffuses lateral and twisting motion. Steel alloy springs are epoxy coated to protect against rust and
PF1CQ150T4016F, APF1CQ150T4016G, APFICQ150T4016D, NSN 2910-00-649-6555, Old ALCO part number 72-77310-17
800 RPM. 1329 total hrs on unit. Powered by Hercules D298ERX37 D3000 White D298ER White / Hercules 6 cyl diesel, S
www.surplusman.com/detail.php?itemid=621">click here</a>
ve station Hydraulic valve loaders, cut-in @225psi, cut-out @250psi Fresh water cooled w/salt water heat exchanger Cylin
input and output shafts. New, several available.
HP continuous power. Dry weight 1480 lbs. Includes drive plate. Low hour unit in excellent condition.
ns. Missing starter, alternator, dipstick and tube, shutdown solenoid, cooling water ell out of oil cooler, oil fill cap, manifold
61. Serial no. 806425-052-577727.
cooling. Fiat Iveco. Various units available Fiat Iveco Dims 42"L 25"W 33"H
ts available.
, 2030, 2150, 2155, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2950, 295
rplusman.com/Detail.php?itemid=4816"_self">(click here)</a>
4169 and RE48125. Option code 2002
020, 7700, 7720, 8430 Model Year 1974-1981, 8440, 8450, 8820. 4 ea available.
0, 1640, 1840, 2040, 450, 450B, 450C, 310, 410, 410B, 410C. NSN 2815-01-192-8341, 2815011928341, 2815 01 192 8
Fits: 6.404 and 6.466 Engines 4000, 4020 s.n.215000 thru 335845, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450
8630 W/ 6619AE-02 Eng. SN <048542, 8640, 890, (890A, 992DLC ALL Eng. SN 040932>
Replaces old part #'s RE505662, RE509763, RE505662 and RE509629.
ain Bearings 1-Thrust Bearing 1-Thrust Washer Set 6-Connecting Rod Honable Bushings 4-Camshaft Bushings 1-Overhau
Set 1-Lower Gasket Set 1-Conversion Gasket Set 12-Capscrews Applications: John Deere Tractors: 644C, 644D, 690C, 74
2255 (prior to s/n 704045) 2350 2355 2550 2555 2750 (prior to s/n 594282) 2755 2855N 5500 (prior to s/n 248699). R
99) 2240 (prior to s/n 349999) 2440.
ID 6 cylinder 340 CID diesels. Use with block numbers R40910 R46350 R46430 only.
Number from 253,373 for the 466T engine and Engine Serial Number from 67,685 for the 466A engine.
shings 4-Camshaft Bushings 1-Overhaul Gasket Set 1-Front & Rear Crankshaft Seals 1-Cup Plug 12-Capscrews Appli
shings 4-Camshaft Bushings 1-Overhaul Gasket Set 1-Front &Rear Crankshaft Seals 1-Cup Plug 12-Capscrews Applica
hp?itemid=3118"_self">(click here)</a>
9, 8630 W/ 6619AE-02 Eng. SN <048542, 8640, 890, (890A, 992DLC ALL Eng. SN 040932>
o injector no. 0551 01F 0279. New in box, 4 ea available.
part no. 5150 10H01076. New in box, 5 ea available
(stainless steel)
Thrust Washer Set 6-Connecting Rod Honable Bushings 4-Camshaft Bushings 1-Overhaul Gasket Set 1-Front & Rear
s: 108.1L x 41.4w x 75.8 ht. Date of mfg 01-91. Control no. DAAK01-87-D-A111. Mfg by John R Hollingsworth Co. Design
: 108.1L x 41.4w x 75.8 ht. Date of mfg 12-89. Control no. DAAK01-87-D-A111. Mfg by John R Hollingsworth Co. Designe
ns: 98.1L x 41.4w x 75.8 ht. Date of mfg 12-88. Control no. DAAK01-87-D-A111. Mfg by John R Hollingsworth Co. Des
h magnetic contactor model no. MC330L. Last used on Detroit Diesel 4-71T engine. Very few hours on unit. In excellent co
with magnetic contactor model no. MC330L. Last used on Detroit Diesel 4-71T engine. Very few hours on unit. In excelle
ofile applications. 24 available, all units are under 1000 hrs total time price $690.00 each or best offer
applications. 25 available, all units are under 1000 hrs total time price $690.00 each or best offer
e applications. 25 available. 24VDC. price $690.00 each or best offer
e applications. 25 available. 24VDC. price $690.00 each or best offer
e applications. 25 available. 24VDC. price $690.00 each or best offer
e applications. Several available. 24VDC. price $690.00 each or best offer
ns. No Motor Mounts, no heat shield on exhaust manifold. Several available. 24VDC. price $690.00 each
ns. No Motor Mounts, no heat shield on exhaust manifold. Several available. 24VDC. price $690.00 each
e applications. Several available. 24VDC. price $690.00 each
profile applications. Several available. 24VDC. price $690.00 each
e applications. Several available. 24VDC. price $690.00 each or best offer
s. No Motor Mounts, several units available. 24VDC. Price $690.00 each
e applications. Several available. 24VDC. price $690.00 each or best offer
e applications. Several available. 24VDC. price $690.00 each or best offer
applications. Several available. 24VDC. price $690.00 each or best offer
motor mounts, no heat shield on exhaust manifold. Several available. 24VDC. price $690.00 each or best offer
applications. Several available. 24VDC. price $690.00 each or best offer
otor mounts, no heat shield on exhaust manifold. Several available. 24VDC. price $690.00 each or best offer
. 2 ea. available
e burned wires going to current transformers, minor repair. Made by Libby Corp. NSN 6115012747390
ML-3020485. 60 hz @ 1800 RPM. 24 VDC system. Woodward governor part no. 041820, serial no. 1915179. Deetroit Di
0A520/4LS3934, 646178371.
SN 4320-DC-3155943, 4320DC3155943
ooled. With Paragon manual gear, model no. OM102, serial no. 13A58. Ex sailboat auxiliary.
20000459852.
rgency repair items. Dry Dimensions: 28' L 7'4" W 4"H (lays flat), filled dimensions: 27' L 62"W 52"H. Surplus military un
- 60 hz. Missing starter, Oil Press and Temp Gauge. Available as is or re-furbished. NSN 6115010366374
348742 NSN 3110001865037 Press Plate 8735507 NSN 2520000974152 Kit NSN 2520011787175
NSN 6115000178239
was refubished by the military, has been in storage for a few years. It has all the necessary pumps for operation, no hoses
13725721, 2990013830890.
ake parallel installations costly and/or difficult. When S or SR two lever controls are used in a parallel dual station applicatio
PE LIGHT DUTY FACE WIDTH 0.375 INCHES NOMINAL 7 ea available. NSN 3455002313476
level caused by overfill, or water / fuel seepage into crankcase. Several available in box, never used.
duction box, Twin Disc PTO, model no. F108 HP4. Turbocraft Centrifugal pump with 4" "camlock" suction,
temid=1964"_self">(click here)</a>.
315 breather check valve 113-0331 ring set (2 sets) 149-1046 repair kit 168-0198 overhaul gasket kit NSN 28150100871
NSN 6115-00-466-1030
ick here)</a>.
r and alternator. 60 hz. Weight, 1220 lbs. Dimensions, L 62", W 32", Ht 37". Fully self contained with fuel tank, or can be
s not run. Suspect bad injection pump. appears complete. Several available. NSN 6115004561044
hrs on unit. Unit does not run, suspect bad injection pump. Needs some work. Several available. NSN 6115004561044
run, runs good. produces powerr in all phases. NSN 6115004561044. To see this unit run, <a href="https://www.youtub
n, runs good. produces powerr in all phases. NSN 6115004561044. to see it run, <a href="https://www.youtube.com/wa
NSN 6115004561044
oes not run. Suspect bad injection pump. appears complete. Several available. NSN 6115004561044
ns over, appears complete. Several available. NSN 6115004561044
ears complete. Several available. NSN 6115004561044
appears complete. NSN 6115004561044
ears complete. Several available. NSN 6115004561044
pears complete. Several available. NSN 6115004561044
ase and voltage selector switch. 24 V starter and alternator. 60 hz. Weight, 1220 lbs. Dimensions, L 62", W 32", Ht 37". F
attery gauge, some air louvres. Unit turns over. NSN 6115004651030
re, Acoustic Suppression kit ASK-10. Unit turns over, appears complete. NSN 6115004651030
appears complete. Weight, 1220 lbs. Dimensions, L 62", W 32", Ht 37". NSN 6115004651030
quency Meter pegs out, voltge Selector Switch frozen. NSN 6115004651030
o go. Weight, 1220 lbs. Dimensions, L 62", W 32", Ht 37". NSN 6115004651030
attery gauge, oil pressure gauge, voltage regulator, fan guard. Injection pump frozen. Front mounts bad. Unit turns over
gauge, frequency gauge, hour meter, fan guard, fuel tank. Unit turns over. NSN 6115004651030
ported ball within a suitable ported seat(s). The ball is usually engaged by a stem. It is normally operated in an open or c
d for water or also used by military for diesel fuel transfer. Several available
h NPT fittings shell side. 4 ea available.
e each $165.00
er through a suction valve on the up-stroke and discharged through a discharge valve on the down-stroke. Primer body is
gaskets and mounting hardware. 20 kits available. NSN 2805-01-377-4550, 2805013774550, 2805 01 377 4550.
water cooled w/salt water heat exhanger, Cylinders jacket water cooled, compressor discharge, Belt driven by 3 ph 460V m
and 6068DFM 300 Series Engines. Marked R56187 or R116851. Replaces old part number AR66400. 4 ea available.
6 inch, 4 1/4inch dia, 281/4 inch shell length (between channel heads). New in box, 2 ea available. To view application,
440 (Eng. SN: 027605>), (4440, 4450, 4640, 4650, 4840, 4850, 8430, 8440, 8450 (ALL TB4129 Turbo Model), 4450, 464
001 8292. New in crate, 2 ea available. Used in Case 1150 or 1155 track loader and dozer, others.
out changing flywheel Part number A-6441-A.
your crash box to MG-509 without changing flywheel or relocating engine. Drive ring part no. A6441A
mid=2751"_self">(click here)</a>
?itemid=1665">click here</a>
=2707"_self">(click here)</a>
serial no. 347078. SAE 0 housing.
hp?itemid=6615"_self">(click here)</a>. MG 540 RH Ratio 1.93/1 Serial # 3J1882
00 933 2954.
ng holes. 4 available.
units available, with all pumps, hoses, chemicals and accessories for operation. Replacement RO membranes, filter elemen
educer.Rated at 20,000 LBs at 30 FPM, on second wrap. Geared Transmission is enclosed. Weighs 5500 LBS, without wire
As pictured.
20 HP, 1175 RPM. 200V 3 phase 60A. For Use on Military style 600 GPH ROWPU <a href="http://www.surplusman.com/
ittings 1" pipe, tube side 1/2". As pictured, tube fittings reduced to 3/8" pipe. Shown with AMF / CUNO filter, model DDS.
New, as pictured.
two each available. Off of Detroit Diesel 16V-92TA. To view other gear, <a href="http://www.surplusman.com/detail.php
k here)</a>
to 4 in, CVI pipe–size valves are applicable to any cryogenic fluid ­handling system, particularly for use in pro
t;(click here)</a>
under load without load interruption. 120 / 208 Y, 3 pole, NEMA 3R enclosure. Dimensions: 32x24x84H. Quantity availab
n 25 cycles per minute. Available in various pressure ranges up to 150 psi, diaphragm switches are suitable for use in eithe
excitation from the generator line, or other AC sources. Regulation accuracy better than +/- 1.0% Adjustable frequency c
elow synchronous speed. the regulator is designed for prime and standby power applications for small and medium sized
shless excited synchronous generators up to 5 MW. These devices offer higher powered output and accept a variety of ac
e build-up, overexcitation shutdown, and EMI filtering as standard. Integrated circuitry for compact size, simplicity, high re
small, ruggedly constructed package. Integrated circuitry for compact size, simplicity, high reliability. Extremely rugged.
tering Genset Control Engine Protection 16 programmable contact inputs; 7 Contact outputs: (3) 30 Adc and (4) Programm
hutdown as standard Integrated circuitry for compact size, simplicity, high reliability. Extremely rugged. Exciter field curre
DEERE AT173624, AT220393, TY6799 Internally Regulated, 65 AMP Neg. Ground 3-Wire Hook-Up, Tachometer Lead, Ign
system that provides a true Key-to-Key drive to both the shaft and the hub. 2.4375 bore.
ere on your vehicle. .088" dia. stainless steel core .375 dia. outer conduit on cable Dual lock balls provide increased load r
onnections. Midland air compressor model 0672IN500130. Engine does not turn over. NSN 2815014190222
5M600, serial no. 431082DHD3964. National Stock no. 4310-01-006-9027, 4310010069027, 4310 01 006 9027. Weight
nder block casting number 5L9549
te. NSN 2815-01-222-6151, 2815012226151, 2815 01 222 6151. Made by Caterpillar USA.
4432, 1A9579,0S1618 NSN 2940010936889
php?itemid=1862">(click here)</a>
ge 460 VAC 3 Phase 60 hz. Controls 120 VAC. Includes Installation and Operations manual. Made by Coffin Wold Water
d to check the protrusion of the governor weight assist plunger during assembly of the fuel pump. Using any other type o
ng set-NTA855-G2(BCⅢ) NSN 2815011421732
31. Vibration Damper part no. 1991198. Will sell all or part.
7,1204, 1266, 1270, 1307, 1319, 1562, 1600, 1698). Tee part no. 8924482
able new (click here)</a>
f="http://surplusman.com/Detail.php?itemid=6301"_self">(click here)</a>.
man.com/Detail.php?itemid=6300"_self">(click here)</a>.
?itemid=2432" target="_self">(click here)</a>
o. J1384R. Belt driven is Bendix compressor, no numbers available. 24V system, damage to starter solenoid.
">(click here)</a>
oup no. 3.5001. Used, as pictured. Turns well.
630JA. SAE 1 bell housing flywheel plate part no. 23046428. 9A90 injectors. 15 engines available. Will part out. Also a
ovides direct mounting compatibility with other DynaGen controllers such as the GSC400 to allow for a full range of option
condition. Complete with all accesories pictured, plus spare instrument bulbs, belts, and more. NSN 4910014171870
6. 354-916 RPM. Very low hour running take-out, Call for Details
.500 IN. C TO C;2.485 IN. BODY DIA; INTERNAL THD INLET PORT 1.125-12 UNF RH;INTERNAL THD RETURN PORT 0.125
sor signal will control a wide variety of engines in an isochronous mode. It is designed for high reliability and its hard pott
part no. 8502115. New, unused. NSN 4420009106067
arbureted engines. Sized for engines up to approximately 150 HP. Used in conjunction with GAC Speed Control Units and
ized carbureted engines. Sized for engines up to approximately 700 HP. Used in conjunction with GAC Speed Control Units
etic particles collecting and jamming the actuator. As a result, the 275 Series typically outlasts the life of a diesel engine a
agnetic particles collecting and jamming the actuator. Mounts directly on Bosch P9 and 10 fuel injection pumps in place o
e of 35 degrees of rotation with torques as high as 12 lb-ft. Internal springs provide fail safe operation by forcing the actua
s/hr. Design is totally sealed for outstanding reliability. A single compression spring is used to improve reliability. No ma
Actuator directly drives the throttle plate with internal return springs, insuring that the throttle plate returns to the minimu
applications. BEC 100 standard, BEC150 includes pre-heat (glow Plug) Circuitry.
r industrial engine applications from generator sets, mechanical drives, pumps or compressors
or accurate control of governed speed.
ngine environment. 12 or 24 VDC.
nsor signal, will control a wide variety of engines in an isochronous mode. It is designed for high reliability and built rugge
eed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability
nsor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability and b
peed sensor signal, will control a wide varety of engines in an isochronous or droop mode. It is designed for high reliability
microprocessor technology. GAC’s new controller series provides superior generator set control, protection, and me
match for JDR's rugged design. With installation and setup a breeze, users will be monitoring engine vital signs and config
d Size Options 3/8-24 UNF 5/8-18 UNF M16 x 1.5 3/4-16 UNF Connector Options Bare Leads / Shielded Cable Commercia
o protect against rust and corrosion. Deeper spring cavities and optional spring force outputs offer uniform output and lon
art number 72-77310-178, ALCO ITEM number 72-03920-002, 46 each available
/ Hercules 6 cyl diesel, Self contained. Offered as-is, or will refurbish to suit.
ater heat exchanger Cylinders jacket water cooled, compressor discharge aftercooled by belt driven 3ph, 460V motor, 25
122219, 4420-01-112-2219, 4420 01 112 2219.
ooler, oil fill cap, manifold, turbo. Core engine. Fiat Iveco.
ors: 644C, 644D, 690C, 740A, 743A, 743, 762A, 762B, 770A, 770B, 772A, 772B, 790, 790D, 792, 793D, 850B, 4250, 435
0 (prior to s/n 248699). Replaces John Deere casting numbers R70437 R78286 R100812.
Plug 12-Capscrews Applications: John Deere: 644C, 644D, 740A, 743A, 743, 762A, 770B, 4240S, 4440, 4455, 4485, 464
Plug 12-Capscrews Applications: John Deere: 644C, 644D, 693C, 740A, 743A, 743, 762A, 762B, 770A, 770B, 772A, 772B
G120-3374-766-08"_self">(click here)</a>.
20-3374-766-08"_self">(click here)</a>.
20-3374-766-08"_self">(click here)</a>.
Set 1-Front & Rear Crankshaft Seals 1-Cup Plug 12-Capscrews Applications: John Deere: 644C, 644D, 740A, 743A,
Hollingsworth Co. Designed for military 30 KW gen set. We have skids available that this enclosure attaches to that can b
Hollingsworth Co. Designed for military 30 KW gen set. We have skids available that this enclosure attaches to that can be
n R Hollingsworth Co. Designed for military 15 KW gen set. We have skids available that this enclosure attaches to that c
urs on unit. In excellent condition. NSN 2990011780567
w hours on unit. In excellent condition. NSN 2990011780567
h or best offer
or best offer
no. 1915179. Deetroit Diesel part no. 5108304.
52"H. Surplus military unit. NSN 5430-01-181-4071, 5430011814071, 5430 01 181 4071.
ps for operation, no hoses. Chemicals for operation not included. Mutlimedia filter has been serviced. Dimensions: 115x8
allel dual station application cable routings or too small a cable bend radius may cause the clutch or throttle levers to oper
mid=3943"_self">(click here)</a>
with fuel tank, or can be operated with remote tank. National Stock No. 6115-00-465-1030, 6115004651030, 6115 00 4
NSN 6115004561044
href="https://www.youtube.com/watch?v=iRPI5xiIIhI&feature=youtu.be"_self">CLICK HERE</a>
s://www.youtube.com/watch?v=w8WoVXt8hx8&feature=youtu.be"_self">CLICK HERE</a>
c">Click here</a>
t, 1220 lbs. Dimensions, L 62", W 32", Ht 37". NSN 6115004651030
s, L 62", W 32", Ht 37". Fully self contained with fuel tank, or can be operated with remote tank. National Stock No. 61150
Belt driven by 3 ph 460V motor 25 hspwr, 1750rpm, 319.4 hrs total on unit
66400. 4 ea available.
ble. To view application, <a href="http://www.surplusman.com/Detail.php?itemid=1898"_self">(click here)</a>
9 Turbo Model), 4450, 4640, (4640, 4840, 8430, 8440, 8450 (ALL Eng SN: 027605-282880), 4650, 4840, 4850, 8430, 84
meet all NSA/CSS 02-02 requirements for the destruction of paper documents. Security Engineered Machinery serial no. 2
orp model A-3 control box, Part no. ST40023. New, unused.
sated to operate from -25 degrees F to 225 degrees F. The battery charger can be operated continuously with the battery
ick here)</a>
For more info, <a href="http://www.surplusman.com/static/O_water_RO.php?menuid=27" target="_self">(click here)</
click here)</a>
membranes, filter elements hoses also available. Special pumps, controlled by a built-in panel, move the water through th
s 5500 LBS, without wire rope. Drum is 20" wide. Core is 21" diameter. Flange Dia is 36". Forward, Reverse controls. Dru
://www.surplusman.com/Detail.php?itemid=356"_self">(click here)</a>
CUNO filter, model DDS. LOA 14". New, never used
urplusman.com/detail.php?itemid=1290">click here</a>
particularly for use in processes using liquid helium and cold dense helium gas. The V-1060 series valves are suitable for
24x84H. Quantity available.
re suitable for use in either positive pressure or vacuum applications. Single, and dual, and triple circuit models are availa
% Adjustable frequency compensation Parallel droop or cross current compensation Overexcitation alarm via a triac outpu
small and medium sized brushless generators. Accessory equipment can adapt the APR to a broad range of specialized a
and accept a variety of accessory items for new and retrofit applications where high performance and reliability are manda
act size, simplicity, high reliability. Extremely rugged. Exciter field current 4A continuous, 7A forcing. Regulation accuracy
bility. Extremely rugged. Exciter field current 7A continuous, 11.5A forcing. Regulation accuracy better than +/-.25% no lo
30 Adc and (4) Programmable 2 Adc rated contacts Additional (8) Programmable 2 Adc contacts (optional) Expandable I/
rugged. Exciter field current 4A continuous, 7A forcing. Regulation accuracy better than +/- 1.0% no load to full load. Fast
Up, Tachometer Lead, Ignition protected
ls provide increased load range and extended plunger life Adjustable friction collar assures stable settings in the presence
15014190222
310 01 006 9027. Weight 8040 lbs. 1028 hours on unit.
ade by Coffin Wold Water Systems. NSN 4330014411572
p. Using any other type of indicator will compress the weight assist spring, causing incorrect readings. New in box, 175 ea
8). Tee part no. 8924482
rter solenoid.
309, 352, 354, 357, 358, 364, 366, 367, 371, 374, 
1-09"_self">(click here)</a> NSN 2815011321417
able. Will part out. Also available for this engine Allison TH-740 transmission <a href="http://www.surplusman.com/Deta
w for a full range of options to fit the application. Displays: * Oil Pressure * Engine Temperature * Fuel Level
NSN 4910014171870
THD RETURN PORT 0.125-27 NPT RH;5 FUEL INJECTION HOLE IN NOZZLE. 2 ea available. New in box.
eliability and its hard potted design will withstand the engine environment.
C Speed Control Units and Magnetic Speed Sensors. 1.0 lb-ft torque, 20 degree rotation (25 degree ADB / ADC), < 32mse
h GAC Speed Control Units and Magnetic Speed Sensors. 2.2 lb-ft torque, 25 degree rotation, <45 msec response. NSN: A
he life of a diesel engine and is maintenance free. Mounts directly on Bosch P and RP-21 Fuel injection pumps in place of
njection pumps in place of mechanical governor.
ration by forcing the actuator to the fuel shut off position when the actuator is de-energized. Both CW and CCW shafts are
ate returns to the minimum fuel position when the actuator becomes de-energized.
Shielded Cable Commercial Molded Plug Packard Metri-Pak MIL Sensors w/ Wire Leads <a href="http://www.surplusman.c
er uniform output and longer service life. The Maxibrake® H-Series Hydraulic Spring-Set Parking Brake release mecha
ven 3ph, 460V motor, 25 HP, 1750 rpm Dimensions: 6'L x 3.25'W x 4'H
20, 6030, 7200, 7400, 7600 Diesel
8450, 850B, 8640, 8650, 600 s.n. 215000 thru 335845, 644C, 644D, 646A, 690B, 690C, 693B, 693C, 740A 762, 762A, 7
screws Applications: John Deere: 4320, 4520, 4620, 5200, 5400, 5440, 7020
2, 793D, 850B, 4250, 4350, 4440, 4450, 4455, 4485, 4640, 4650, 4850, 7720, 8450, 8820
0S, 4440, 4455, 4485, 4640, 4840, 7720, 8430, 8440, 8450, 8820
770A, 770B, 772A, 772B, 790, 790D, 792, 793D, 850B, 4250, 4350, 4440, 4450, 4455, 4485, 4650, 4850, 7720, 8450,
644C, 644D, 740A, 743A, 743, 762A, 770B, 4240S, 4440, 4455, 4485, 4640, 4840, 7720, 8430, 8440, 8450, 8820
ure attaches to that can be modified to accept other gen sets. 2 available.
re attaches to that can be modified to accept other gen sets. 2 available.
closure attaches to that can be modified to accept other gen sets.
viced. Dimensions: 115x83x67H, weight 8710 lbs. Offered as-is, as pictured. NSN 4610013000918
h or throttle levers to operate "stiff" or "bumpy". Adding a transfer unit can improve control performance. Part no. 061371
eere 4039 DEFM, 4045 TFM Detroit Diesel 3-53, 4-53, 4-71, 6V-71
15004651030, 6115 00 465 1030. Several units available.
National Stock No. 6115004651030. to see it run, <a href="https://www.youtube.com/watch?v=jO9lA0QgJv8&feat
man.com/Detail.php?itemid=356"_self">(click here)</a>.
extremely tough and longwearing. A rubber air discharge valve, built into the diaphragm, provides a positive seal.
>(click here)</a>
50, 4840, 4850, 8430, 8440, 8450; COMBINE: 6620, 6622, 7720, 8820, 8820 (TB4129 Turbo Model); FORAGE HARVEST
red Machinery serial no. 28375. 5 Bladed Solid Steel Rotor, (7 Blade Cutting System Energy Efficient 20HP Motor @ 460V
tinuously with the battery disconnected with an output of 23 to 34VDC continuous at 0.5 amps. The battery charger&rsqu
et="_self">(click here)</a>
move the water through the ROWPU to produce as much as 10 gallons of drinking water per minute. The ROWPU reduces t
ard, Reverse controls. Drum is grooved for 1-1/8" Wire rope. Winch will hold 900' of it. Stearns electric brake on the backs
es valves are suitable for 350 PSIG design pressures and are fabricated from corrosion resistant 300 series Austenitic stain
e circuit models are available. Housed models (D1H & D2H) feature a durable, anodized aluminum enclosure with an
on alarm via a triac output Solid state voltage buildup Applicable for 50 or 60 Hz systems Compatible with single phase P
oad range of specialized applications. Regulation accuracy better than +/- 0.25% Frequency compensated Overexcitation
e and reliability are mandatory. These devices utilize a pulse width modulated power stage, state of the art circuitry, and a
ing. Regulation accuracy better than +/- 1.0% no load to full load. Fast response. Frequency compensation. Overexcitatio
better than +/-.25% no load to full load. Fast response. Built in parallel droop compensation (optional). EMI suppression C
s (optional) Expandable I/O capability via J1939 CANBUS (optional) BESTCOMSPlus (included with every DGC-2020 at no a
% no load to full load. Fast response. Frequency compensation. Over-excitation shutdown. EMI suppression. CSWA approve
e settings in the presence of severe vibration. 5 ea available. NSN 2990013636932
dings. New in box, 175 ea. available. NSN 4910001505839
bsp;371, 374, 379, 381, 382, 383, 384, 385, 386, 390, 39
ww.surplusman.com/Detail.php?itemid=4771"_self">(click here)</a>. NSN 2815011321417
ation result in the most consistent product performance available. SW30-8040-A. Dimensions 8" x 40" NSN 4610012534
erature * Fuel Level * Hour Meter * Frequency * Battery Voltage * Conformally coated for protection against
ree ADB / ADC), < 32msec. response.
th CW and CCW shafts are available. Engine applications include large block pumps, and dual medium and some large siz
ude adjustable droop and idle operation, inputs for accessories used in multi-engine or special applications, protection aga
and idle operation, inputs for accessories used in multi-engine or special applications, a single element speed switch, prote
features of the ESD5500 series are the engine starting fuel and speed ramping adjustments. the use of these features wi
nitoring & Alerts. 18 Configurable Binary Inputs & Outputs. Configuration Software SAEJ1939 / MODBUS / RS-2
king Brake release mechanisms are housed inside the unit making them readily available for use. Stamped steel piston wi
693C, 740A 762, 762A, 762B, 770A, 770B, 772A, 772B, 790, 790D, 792, 793D, 892D, 892
4650, 4850, 7720, 8450, 8820
8440, 8450, 8820
ormance. Part no. 061371. NSN 2520013827057
v=jO9lA0QgJv8&feature=youtu.be"_self">CLICK HERE</a>
des a positive seal.
Model); FORAGE HARVESTER: 5720; INDUST./CONST.: 644C, 644D, 646C, 690C, 690CR, 740A, 762A, 762B, 770A, 770B,
cient 20HP Motor @ 460V/3ph/60Hz Safety Interlock Switches, integrated Noise Reduction. Twin Bag Collection System
The battery charger’s input is protected against accidental reversal of input connections. Additional features: *
te. The ROWPU reduces the number of small particles held in solution found in most fresh water systems, dirty streams an
lectric brake on the backside of the motor. The winch has a manual wheel turn friction brake on the drum end and a locki
300 series Austenitic stainless steel (consult factory for special material requirements). The replaceable seal is of KEL-F&r
minum enclosure with an integrated 1/2" NPT conduit connector, a tamper-resistant cover for the setpoint adjustment scre
e of the art circuitry, and advanced methods of noise immunity. they are UL recognized, CSA certified, and CE compliant.
ated for protection against moisture and contaminants. * Customizable Screen Messages. * Configurable via front pa
3510, 2990011763510
edium and some large size carburetors. It's matching speed control unit, the ESB5300, offers a versatile range of feature
pplications, protection against reverse battery voltage, transient voltages, accidental short circuit of the actuator and fail-s
ment speed switch, protection against reverse battery voltage, transient voltages, accidental short circuit of the actuator a
e use of these features will minimize engine exhaust smoke experienced prior to attaining engine operating speed. Other
AEJ1939 / MODBUS / RS-232/485. Resistant to salt, fog, humidity, dust, dirt, and chemical contaminants
. Stamped steel piston with 360° heavy duty plastic bushing and o-ring seal. Chrome plated piston rod. OEM part no
762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 792, 850B. Replaces: RE19780, RE19779, AR83439, AR7362
embly Mechanically rugged Remote voltage adjust rheostat supplied Small size, reliable, low cost EMI filter built in Fast res
rtified, and CE compliant. /- 0.5% accuracy voltage regulation. 0.5% accuracy up to 20% THD (harmonic associated with
ASTM B117-73, Method 711-1C For Salt / Fog 5 Models: AVC63-7 AVC63-7F AVC63-7S AVC63-7FS AVC63-7-1A
l Automatic Synchronizer (optional) SAE J1939 Engine ECU communications Multilingual capability Wide Ambient Tempera
est cost surplus RO membranes <a href="http://www.surplusman.com/Detail.php?itemid=358"_self">(click here)</a>
Configurable via front panel or PC. * Accepts industry standard senders (VDO, Stewart-Warner, Datcon, Murphy). *
versatile range of features such as cranking termination, overspeed sensing, fuel limiting during startup and speed rampin
of the actuator and fail-safe design in the event of loss of speed sensor signal or battery supply. NSN: ESD5111: 2910-0
ort circuit of the actuator and fail-safe design in the event of loss of speed sensor signal or battery supply.
operating speed. Other features included adjustable droop and idle operation, inputs for accessories used in multi-engine
EMI filter built in Fast response time Applicable to 50 or 60 Hz systems Complete accessory line available CSA certified, U
(harmonic associated with 6SCR loads). Outputs of 63 Vdc @ 12 Adc and 125 Vdc @ 10Adc from a PWM output stage. 1 or
AVC63-7FS AVC63-7-1A
y Wide Ambient Temperature range Remote communications to the Basler Electric RDP-110 Remote Dial-out and Dial-in c
_self">(click here)</a>
er, Datcon, Murphy). * Zero speed restart prevents starter pinion wear. * Timers for: Pre-heat/Warm-up/Energize-to
startup and speed ramping to minimize exhausts emissions during the starting cycle.
sories used in multi-engine or special applications, protection against reverse battery voltage, transient voltages, accidenta
a PWM output stage. 1 or 2X V/Hz limiting (jumper selectable). Single or three phase average sensing (jumper selectable
mote Dial-out and Dial-in capability with Internal Modem (optional) Modbus Communications with RS-485 (optional) UL rec
heat/Warm-up/Energize-to-stop, Cool-down, Engine Start Delay, Mid-heat and Post-heat. * Low Battery Indication. *
nsient voltages, accidental short circuit of the actuator and fail safe design in the even of loss of speed sensor signal or ba