Twin Disc Marine Product Guide

MA RINE P RODUC T GUI D E
November 2014
TABLE OF CONTENTS
Twin Disc Marine Product Information . . . . . . . . . . . . . . . . 3 - 24
Service Classification Definitions . . . . . . . . . . . . . . . . . . . . . . . 25
Important Application Information . . . . . . . . . . . . . . . . . . . . . 26
Pleasure Craft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 36
Standard and QuickShift® Marine Transmission Ratings
Light Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 - 44
Intermediate Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 - 54
Medium Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 64
Continuous Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 - 74
Standard and QuickShift®

Marine Transmission Dimensions . . . . . . . . . . . . . . . . . 75 - 82
Twin Disc Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 - 86

ENGINEERED TO WORK. HARD.
Twin Disc marine products are designed,
engineered and built to perform real tasks,
really well, in the real world. Sometimes it’s
glamorous work; sometimes it’s not so pretty. FAST, SMOOTH SHIFTS
No other marine transmission in the world shifts as fast and
But it’s always necessary. smooth as the Twin Disc QuickShift®, yet it provides amazing
control at near zero vessel speed.
From luxurious pleasure craft to stealthy military FEATURES & BENEFITS
vessels to hard-working tugs, pushboats, fishing • Patented, completely internal and integrated clutch
actuating system
boats, crew boats and supply vessels, Twin Disc
• Regulates engine torque at extremely low speeds to slow
products optimize the control of the engine’s the propeller speed down to 50 rpm or less — allowing
you to maneuver at near zero boat speed, an incredible
horsepower, contributing to the boat’s overall advantage in docking
performance, productivity, operating efficiency • Instantly delivers cushioned torque to the driveline
when shifting from neutral to anywhere from full ahead
and cost-effectiveness. to full reverse
• Eliminates driveline shock while optimizing power
to the driveshaft
Twin Disc marine products propel all kinds of
• Steep but smooth power curve (full out or at slow speeds)
vessels, on all kinds of water, all around the world.
• Superior maneuvering control
• Instant power to propeller
2 3
SPEED IS JUST THE BEGINNING
Mechanical innovator and offshore racing enthusiast
Howard Arneson perfected the performance and reliability
of surface-piercing propulsion. Twin Disc then made Arneson
Surface Drives® available for non-racing applications — pleasure
craft and commercial vessels, as well as military applications.
Today, Arneson Surface Drives® are renown as the fastest,
most efficient, fuel-friendly propulsion systems on the planet.
FEATURES & BENEFITS
• Cleaner hull, trimable drive shaft and adjustable angle • Accelerate faster and achieve higher top end than
conventional drives
• Completely eliminates cavitation, thus increasing propeller
performance while reducing cavitation erosion • Reduce underwater drag by 50% compared to conventional
submerged propeller drive systems and provide more
• Manufactured for maximum duty applications and to last efficient thrust
the life of the vessel using high-quality, corrosion-resistant
materials matched to exacting tolerances • Can reduce engine costs while maintaining performance
• Models designed to fit virtually every powerplant option, • Better payload-to-power ratio
accommodating torque outputs exceeding 16,500 lb-ft
• Outperforms waterjets in high-speed applications
• Can be combined with Twin Disc QuickShift® transmissions
and EC300 control systems
MODEL ASD06 ASD08 ASD10 ASD11S ASD12 ASD14 ASD15S ASD15L ASD16
GASOLINE @ 5200 rpm To 550 To 990 To 1485 —

HORSEPOWER
DIESEL @ 2400 rpm To 290 To 380 To 565 To 850 To 1400 To 1800 To 2100 To 2400 Contact Twin Disc, Inc.
ACCEPTANCE
GAS TURBINE Contact Twin Disc, Inc.
ASD INPUT SHAFT TORQUE LIMITS1 (lbs-ft) 650 1200 2000 3200 4800 8000 11500 13500 16500
NOMINAL SHAFT SIZE (inches) 1.75 2.00 2.50 2.875 3.30 3.50 4.50 4.50 4.50
UNIT WEIGHT (pounds, dry, includes ASD unit,
A 135
trim and steering cylinders, trim pump, reservoir, B 285 B 415 B 515 B 785 B 1135 A 1500 A 1540 A 1985
B 195
mounting hardware and hoses)2
OVERALL EXTERNAL LENGTH (inches) 36 42 53 57 63 71 78 78 87
THRUST SOCKET DIAMETER (inches) 8 8 10 10 13 15 19 19 20
THRUST SOCKET FLANGE DIAMETER (inches) 8 12 14 14 17 19 21.25 21.25 23
TURNING ANGLE (total) 40˚ 40˚ 40˚ 40˚ 40˚ 40˚ 36˚ 36˚ 36˚
PROPELLER TRIM CONTROL (vertical travel) 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 15˚
1. Torque ratings shown are nominal and may vary due to vessel characteristics. 2 A: Aluminum housings
4 B: Bronze housings 5
TWIN DISC MARINE CONTROL DRIVE (MCD)
TESTED & PROVEN
With over 30 years of research, development and operation,
the versatile Twin Disc Marine Control Drive (MCD) has proven
its worth in a wide variety of workboat applications including
tugs, offshore supply vessels, double-ended ferries, icebreakers,
dredges and fire fighting vessels.
FEATURES & BENEFITS

ULTIMATE PROPELLER PERFORMANCE
• Provides operating advantages for vessels requiring
Since 1963 the name Rolla has been synonymous with the
highly-accurate positioning
highest quality, most efficient propellers in the world. What
• Used in conjunction with Azimuth Thruster systems started with Philip Rolla individually designing and crafting
• Best alternative to controllable pitch propellers (CPP) race-winning propellers has grown to become the leader
• Dynamic positioning (DP) capable in propeller technology for high-performance pleasure
and commercial craft and military vessels.
• PTO to drive auxiliary equipment is standard
• Emergency “come home” device per classification
FEATURES & BENEFITS
requirements
• Smooth, gradual propeller speed change resulting • Rolla stainless steel and NiBrAl propellers range from
in improved maneuverability 16 inches to 10 feet in diameter
• Safer and easier vessel control during slow speed • Specifically designed for high-performance submerged
maneuvering and docking and Arneson Surface Drive® applications
• Adjustment of propeller speeds below engine speed rating • Wide variety of service for every aspect of propeller design,
manufacture and application
• Divides the power from the main propulsion engine
to eliminate the need for auxiliary engines • Offers complete hydrodynamic analysis and engineering
capabilities to computational fluid dynamic (CFD) hull
• Delivers an instant response when required analysis to sea trials
• Bearing calculated for high universal joint angles
at maximum power
6 7
TWIN DISC BOW & STERN THRUSTERS TWIN DISC HYDRAULIC THRUSTERS
RELIABLE AND HIGH-PERFORMING FEATURES & BENEFITS
Our years of experience in propulsion technologies have
• Combines the need for higher thrust requirements and
brought Twin Disc to the development of our bow thrusters line. longer working cycles with the builders’ need to control
Our thrusters are suitable for applications from 20’ to 130’. the total weight and dimensions, and the final system cost
Compact design and easy installation make Twin Disc • Bow- and stern- mounting options
bow thrusters a favorite among major boatyards.
• Designed and sized specifically for each individual application
TWIN DISC ELECTRIC THRUSTERS • Complete range for applications up to 130’

• Double counter-rotating propeller
FEATURES & BENEFITS • Transmission gears built in high-tensile materials
• Compact and effective design for easy installation, • High-quality materials suitable to the marine environment
even in restricted areas
• Wide range of hydraulic components in different sizes
• Bow- and stern- mounting options for a complete system and different configurations
• Reversible electric motor at continuous current • Compact leg design for a low hydrodynamic resistance
• Transmission gears built in high-tensile materials • Reduced noise
• Complete range for applications from 20’ to 60’ • ‘Brand name’ hydraulic components
for easy access to spare parts
• Wide range of accessories for a complete system
• Easy installation
• Low hydro-dynamic resistance
• Conforming to the highest
• Reduced noise production standards
• Materials suitable to the marine environment
• Conforming to the highest production standards
• The thrusters' electric motor can be placed vertically
or horizontally, with no impact on system performance
• PCS control system will automatically shut down the thruster
in the event of system failure to protect from boat damage Hydraulic Thruster Technical Data
Nominal Thrust Tunnel I.D. Nominal Power Weight

MODEL
Kgf • N (lbs) mm (in) kW (hp) kg (lbs)
Control panels 220 • 2158
BP 220 250 (9.83) 18.7 (25) 24 (53)
(485)
300 • 2943
BP 300 300 (11.80) 28.5 (38) 35 (77)
(661)
400 • 3924
BP 400 355 (14) 35 (47) 45 (99)
(881)
550 • 5886
BP 550 400 (15.75) 48.5 (65) 75 (165)
(1322)
Bow Thruster
600 • 5886
BP 600 450 (17.72) 60 (82) 85 (189)
Batteries (1333)
These values are intended to be indicative. The performance of each

thruster depends on several different factors and on the sizing of the hydraulic
Stern Thruster components. Contact the Twin Disc Applications Engineering Department for
suggestions on the most suitable configuration at applications@twindisc.com.
8 9
TWIN DISC STEERING SYSTEMS TWIN DISC TRIM TABS
HYDRAULIC AND ELECTRONIC OPTIONS PERFORMANCE, SAFETY AND EFFICIENCY
Our steering systems are a combination of selected materials, Twin Disc offers trim tab systems in stainless steel and
innovative design and state-of-art technical solutions. All aluminum. Both are available in a large variety of dimensions
components are built with high precision systems and tooling and can be combined with four different hydraulic kits, satisfying
to meet the requirements of the best survey authorities such many different requirements and covering a wide application
as Rina Lloyd’s Register, ABS and Bureau Veritas. field. A large selection of accessories are available to complete
both stainless and aluminum systems and aid in easy and
FEATURES & BENEFITS efficient use.
• Wide variety of possible configurations

FEATURES & BENEFITS
• Suitable for either small/medium pleasure boats
and commercial vessels • Stainless steel offers highest corrosion resistance
• Highly-flexible and efficient electronic systems are suitable • All series MY3000, MY4000 and MY5000 are available
for applications up to 230’ in the simple tab (single plate) type for smaller boats
or with lower loads, and the reinforced tab (reinforced plate)
• Electronic systems support over 100 application types for larger applications
• Decades of experience in the production of electronic • MY3000 series tabs are provided with a welded
power-assisted steering connection cylinder
• Ensure performance and durability Performance improvement
• Hydraulic cylinders and helm pumps can handle
• Stern lifting and better balance
many different applications, from outboard steering
to inboard systems • Faster planing
• Better propeller efficiency for more in-line power
• Listing correction
• Decrease of yawing and wandering with cruising quality
improvement
Safety improvement
• Better and greater visibility

Main station helm pump
Second station
helm pump • Better maneuverability at low cruising speed
A Efficiency improvement
C • Better engine performance

• Reduced fuel consumption
• Staying on plane even at slower cruising speed
B Hoses
Auto-pilot power unit
Relief valve
Cylinder flexible hosing
10 11
SEAPROP 60 SAILDRIVE
SAILING EASE AND VERSATILITY
The SeaProp 60 saildrive is a propul-
sion system for sailboats with engines
rated up to 56 kW (75 hp) @ 3600 ULTIMATE CONTROL IN YOUR HANDS
rpm. Sailboat manufacturers and Leading the industry
operators alike benefit from this in quality, style and
system’s unique but proven design. performance, the Twin
Disc Power Commander™
FEATURES & BENEFITS electronic control system
is designed to interface
• Easy, space-saving installation
with all popular electronic
• Eliminates propeller shaft along engines and transmis-
with stuffing box, cutless bearing,
stern tube and strut sions. It is versatile,
rugged and easy to
• Can be matched with a variety of fixed or foldable propellers
install. With literally one
• Sailboat manufacturer will overcome inherent limitations finger on one lever, the
and problems of conventional inboard shaft drive
installations with a quicker, more versatile and simplified operator can control the
engine installation process boat’s speed and direction. Multiple drivetrains and multiple
control heads can easily be accommodated. Multiple
• Easily mounted facing forward or aft
electronic control stations can be placed around the boat.
• Not constrained by shaft angle and offers the builder more
versatility in engine placement and a smaller ‘footprint’ (no FEATURES & BENEFITS
shaft, stuffing box, or strut aft of the engine)
• Single lever control
• Increased propulsion efficiency as the thrust is parallel
to the boat's waterline • Selectable synchronization
• More efficient, quieter, creating less vibration to the boat • Trolling valve control option
and providing an all-around smoother experience
• J1939, RS232, RS485 coms
• No water leakage into the bilge through the stuffing box
• Allows up to eight control stations
• Cast aluminum control boxes with stainless steel levers
(two length options)
• Express Joystick System® ready
• Selectable station transfer rules
SAILDRIVE SP60 TECHNICAL DATA
• Individual station active indicators
RATIO INPUT RATINGS - PLEASURE KW (HP)
Forward Reverse 2800 rpm 3000 rpm 3600 rpm • Individual station neutral indicators
2.15 2.15 43 (59) 46 (63) 55 (75) • 12 and 24 volt system power compatible
2.38 2.38 34 (46) 36 (50) 44 (60) • Full functionality of Quickshift® gears
Max Input Speed: 3800 rpm
Dry Weight: 43 kg
Oil Quantity: 2.8 liters
12 13
DON'T BUY YOUR NEXT BOAT WITHOUT IT MAINTAIN POSITION WITH THE TOUCH OF A BUTTON
The Twin Disc EJS® Based on the award-winning EJS®, Express Positioning®
(Express Joystick System®) maintains a vessel in a fixed position and heading at the touch
absolutely revolutionizes of a button. A dedicated, highly accurate and reliable GPS
docking and slow speed receiver determines the vessel’s exact location and heading
maneuvering of diesel and the Twin Disc EC300JS controller commands the Twin Disc
powered, conventional QuickShift® transmissions and Twin Disc proportional hydraulic
shaftline boats. thrusters to smoothly and instantaneously maintain the precise
station coordinates and heading*. Never before have shaft line
With easy fingertip
boats been able to so effortlessly hold position.
movements you control
direction and speed —
FEATURES & BENEFITS
instantaneously and
intuitively. No lugging. • Works only in conjunction with Twin Disc Express
No lurching. No clunking. All thanks to proven QuickShift® Joystick System®
transmission and EC300 control technology. • Maximum power available to continuously hold station
without producing excess heat or wear
FEATURES & BENEFITS • Compatible with single-and twin-engine applications
• “Push, twist and go” directional maneuvering • Compatible with twin-engine bow or bow/stern thruster
applications
• Proven QuickShift® transmission and EC300 control
technologies • Can be retrofit to existing EJS® applications
• Simultaneously and instantaneously controls engines, • Based on years of experience with Dynamic Positioning
transmissions and thrusters systems in commercial vessels
• During docking, eliminates steering wheel and control • Only QuickShift® transmissions provide the smooth,
lever activities responsive shifting and propulsion control required
• Effortlessly move the boat in any direction and even pivot • QuickShift® transmissions and precision hydraulic thrusters
on its own axis provide ultra fine maneuvering control at low thrust levels
• Extremely intuitive responsiveness * Vessel position may not be maintained in all sea and weather conditions.
Captain is responsible for the safe operation of the vessel.

• Ergonomically friendly
• Remarkably easy to learn
14 15
EXPRESS JOYSTICK SYSTEM® (EJS®)
Sample Diagram
EC300JS2
Twin Disc Twin Disc

Hydraulic Bow Thruster Hydraulic Stern Thruster
EC300JS4
EC3001 EC3001
Display 3 Display 3
5 5
1 EC300: Standard control system for up to seven digital stations and up to eight
engine/transmission shaft lines per vessel.
2 EC300JS: Express Joystick System® option for up to six joystick stations.
3 Color display option (shown).
4 Available GPS option, station-keeping, Express Positioning System®.
5 T win Disc QuickShift® transmissions required. PLEASE CONTACT TWIN DISC OR A TWIN DISC AUTHORIZED
DISTRIBUTOR FOR MORE DETAILS.
16 17
A NEW LEVEL OF PERFORMANCE AND CONTROL EC300DP POWER COMMANDER
Based on the robust Twin Disc EC-300 electronic control platform,
ELECTRONIC CONTROL SYSTEM
Mastertrim® is a programmable trimming system which adjusts TOTAL PROPULSION CONTROL
the trim of the Arneson Surface Drive® and the vessel’s trim tabs
or interceptors to preset positions based on vessel speed and The Twin Disc EC300DP propulsion control package allows
operator-selected modes. instantaneous, shockless and virtually constant forward and
reverse shifting to keep supply vessels on station as directed
FEATURES & BENEFITS by the craft’s dynamic positioning system. Twin Disc Power
Commander™ Electronic Controls give you total control with
• Four operating modes selected to suit conditions electronic precision and, literally, fingertip ease. With only one
• Select manual mode by simply pressing the mode switch, lever required per engine, you can control your boat's speed
or by manually trimming any one of the drives or tabs and direction with one hand. You get responsive control over
• On-board diagnostics constantly monitor the health of the the entire speed range.
electronic controls system and displays instant feedback
• No special electronics needed for system troubleshooting FEATURES & BENEFITS
• Frees the operator to focus on driving the boat, rather than • High thrust rate change competitive with alternative
adjusting the propulsion system drive packages
• Easily programmed during vessel commissioning via the • More than 30x/minute directional reversals
supplied display; the system will guide the operator through
• Designed for conventional shaft lines
static and dynamic calibrations
• Linear thrust control from 10% of idle engagement
• Current installations supported:
to full engine power
• Twin drive with trim tabs or interceptors
• Tabs or interceptors are required • Maintain fuel-efficient engine speeds even at low
• Single helm station only propeller speeds
• System make up: • Meets DP2 requirements

• Electronic controls: • Enhanced installation, monitoring and maintenance/
• EC300MT control service software
• MT display
• Versatile, rugged and easy to install
• Valve driver module
• Interface to ship’s GPS • Designed to interface with all popular electronic engines
and transmissions
• Driveline speed sensors
• Trim and steering position sensors
• Interface to customer-provided trim and mode switches
• Optional analog gauge kit
• Hydraulic system:
• Twin Disc-supplied integrated trim and steering
manifold must be used
18 19
TWIN DISC DP INTERFACE SYSTEM (EC300DP)
Sample Diagram
Diesel
Thruster DP Computer
Shipyard
Twin Disc
TWIN DISC
COMMUNICATION
MODULES
EC300DP 3
EC300DP EC300DP1
1 The Twin Disc EC300DP control system is suitable for DP0,

DP1 and DP2 vessels with conventional propellers and two (2)
or more engine/transmission drivelines.
2 Twin Disc QuickShift® transmissions required.
3 Up to six digital stations possible. PLEASE CONTACT TWIN DISC OR A TWIN DISC AUTHORIZED
DISTRIBUTOR FOR MORE DETAILS.
20 21
GLOBAL SERVICE
The Twin Disc Global Customer Support Program is committed to Training curriculum provided by the Twin Disc Global Customer
providing world-class support in the most efficient and consistent Support Program is developed utilizing the latest information
manner for all of our customers. Our regional sales offices and and is built upon decades of expertise. Group training in a
vast distribution network support Twin Disc products all over the classroom setting as well as hands-on training with electrical,
world. With a corporate presence in every major market region, mechanical and spin test stands provide the most in-depth
and our extensive and growing worldwide network of more than training for all of our global technicians.
250 distributor sales and service locations in 83 countries, you
can rest assured you’re never far from Twin Disc support. With our vast network of distributor and dealer locations around
the world, Twin Disc offers you unprecedented service support.
Our program offers a wide range of services from the sales We can put engineering and service expertise on location virtually
process through commissioning and eventually, upgrade. anywhere. We’ll work with you on your particular application and
Twin Disc experts are always available, wherever you are, product to ensure optimum results. We’re more than just a name
to help you obtain the best possible return on your investment you know, Twin Disc is a name you can trust.
in our products.
Wherever you are when you need support, simply call your local
Twin Disc distributor. To find your nearest distributor,
go to: www.twindisc.com.
22 23
SERVICE CLASSIFICATION DEFINITIONS
IMPORTANT APPLICATION INFORMATION
PLEASURE CRAFT • Transmission ratings are based on use of the transmission
Up to 500 hours/year, low load factor usage planing hull in a torsionally compatible system utilizing a suitable input
vessels where typical full engine throttle operation is less torsional coupling.
than 10% of total time. The balance of operation at 80% of
• Ratings are for diesel engines at the indicated speeds,
full engine throttle or less. Marine transmissions for use in unless otherwise indicated.
long range pleasure cruisers, sportfish charter boats/patrol
boats do not qualify for Pleasure Craft Service. • Ratings are shown in SAE horsepower (HP).
• Consult factory for ratings applicable to gasoline engines,
Note: Some revenue-producing applications such as Planing gas turbines, or other applications not conforming to the given
Hull Bristol Bay Gillnetter do qualify under Pleasure Craft service class definitions.
rating definition. • Ratings apply to right hand engines (i.e., counter-clockwise
flywheel rotation when viewing rear of engine).
LIGHT DUTY • Transmission ratings should equal or exceed the engine’s
Relatively low hour usage (less than 1500 hours/year) published ratings for the given application.
where full throttle operation is 2 hours out of 12. Typical • Final marine transmission selections are to be confirmed
applications include planing hull vessels such as fire boats, prior to issuance of the purchase order. For unusual or unique
sport-fish charter boats and patrol/customs boats. This applications, please contact Twin Disc, Inc. for product
rating is also applicable to some bow and stern thruster selection assistance.
applications. • Marine transmission input couplings provided by Twin Disc
are configured to interface with engine flywheels which
conform to SAE J620 standards. Please consult Twin Disc
INTERMEDIATE DUTY when use of non-standard flywheels are considered.
Hour usage of up to 2000 hours/year (for models MG(X)-5114 •
Most of the transmissions listed herein are to be mounted
and smaller) and up to 3000 hours/year (for models larger directly on the SAE flywheel housing of the engine. It is
than MG-5114) with 50% of the operating time at full engine necessary that the engine crankshaft endplay be measured
rating. before the driven equipment is installed and rechecked after
the driven equipment is installed. The endplay measurements,
Typical applications include planing hull vessels such as before and after transmission installation, should be the same.
ferries, fishing boats, some crew boats, and also some If not the same, the driven equipment should be removed and
displacement hull yachts as well as some bow and stern the problem source located and corrected before the engine is
thruster applications. started. Engine crankshaft endplay measurement is considered
mandatory.
• The given data is subject to modifications/corrections without
MEDIUM DUTY prior notice.
Hour usage of up to 4000 hours/year with up to 80% of
• Use certified print for installation.
operating time at full engine power. This duty classification
is for usage where some variations in engine speed/power
occur as part of normal vessel operation.
Typical vessels include mid-water trawlers, crew/supply boats,

ferries and some inland water tow boats.
IMPORTANT NOTICE
Disregarding propulsion system torsional compatibility could
cause damage to components in the drive train resulting in loss
CONTINUOUS DUTY of mobility. At minimum, system incompatibility could result in gear
For use in continuous operation with little or no variation clatter at low speeds.
in engine speed/power settings. The responsibility for ensuring that the torsional compatibility
of the propulsion system is satisfactory rests with the assembler
Typical vessels include fishing trawlers, tow/tug boats of the drive and driven equipment.
and ocean going vessels.
Torsional vibration analysis can be made by the engine builder,
marine survey societies, independent consultants and others.
Twin Disc is prepared to assist in finding solutions to potential
SPECIAL APPLICATIONS torsional problems that relate to the equipment of Twin Disc
Some applications such as Dynamic Positioning (DP), Wind Incorporated’s supply.
Farm Service, and others, require Twin Disc Factory Approval.
24 25
PLEASURE CRAFT RATINGS FOR STANDARD &
QUICKSHIFT® MARINE TRANSMISSIONS
Kilowatts (Horsepower) Maximum Speed
Model Ratios
@ 2300 RPM @ 2800 RPM @ 3200 RPM (rpm)
1.45 26 (35) 26 (35) 26 (35)
MG-340 2.00 21 (28) 26 (35) 26 (35) 4500
2.60 17 (23) 21 (28) 23 (31)
1.55 40 (54) 50 (67) 56 (75)
2.00 36 (48) 44 (59) 50 (67)
MG-360 5000
2.45 29 (39) 35 (47) 40 (54)
2.83 24 (32) 29 (39) 33 (44)
1.54 83 (111) 101 (136) 110 (148)
MG-5005 A 2.00 67 (90) 82 (110) 93 (125) 4500
2.47 50 (67) 60 (81) 70 (94)
1.51 123 (165) 149 (200) 171 (229)
2.09 106 (142) 129 (173) 148 (198)
MG-5012 SC 4500
2.40 94 (126) 115 (154) 131 (176)
2.77 82 (110) 100 (134) 114 (153)
1.50, 2.04 181 (242) 220 (295) 251 (337)
MG-5020 SC 2.50 145 (194) 176 (236) 201 (270) 4000
2.94 123 (165) 150 (201) 171 (229)
1.52, 2.09 115 (154) 140 (188) 160 (215)
MG-5025 A 4500
2.40 100 (134) 123 (165) 140 (188)
1.53, 2.08 214 (287) 261 (350) 298 (400)
MG-5055 A 4000
2.60 144 (193) 176 (236) 201 (270)
@ 2300 RPM @ 2500 RPM @ 2800 RPM
1.00, 1.23, 1.53, 1.71, 2.04 226 (303) 245 (329) 272 (365)
MG-5050 SC* 2.45 226 (303) 233 (312) 261 (350) 3300 (5500*)
3.00 200 (268) 213 (286) 231 (310)
1.12, 1.26, 1.50, 1.80, 2.04 226 (303) 245 (329) 272 (365)
MG-5050 A* 3300 (5500*)
2.50 200 (268) 219 (294) 239 (320)
1.12, 1.26, 1.50, 1.80, 2.04 226 (303) 245 (329) 272 (365)
MG-5050 RV* 3300 (5500*)
2.50 200 (268) 219 (294) 239 (320)
1.15, 1.48, 1.77, 2.00 283 (380) 308 (413) 354 (463)
MG-5061 SC* 2.43 263 (353) 286 (384) 321 (430) 3300 (5500*)
3.00 245 (329) 266 (357) 298 (400)
1.13, 1.28, 1.54, 1.75, 2.00 283 (380) 308 (413) 354 (463)
MG-5061 A* 3300 (5500*)
2.47 263 (353) 286 (384) 321 (430)
1.13, 1.28, 1.54, 1.75, 2.00 283 (380) 308 (413) 354 (463)
MG-5061 RV* 3300*
2.47 263 (353) 286 (384) 321 (430)
1.19, 1.53, 1.83 283 (380) 313 (420) 354 (475)
MG-5062 IV* 3300 (5500*)
2.07, 2.51 263 (353) 286 (384) 321 (430)
MGX-5065 SC 1.08, 1.26, 1.47, 1.72, 2.04 393 (527) 425 (570) 474 (636)
3600
MG-5065 SC 2.43 368 (493) 400 (536) 448 (601)
MGX-5065 A 1.08, 1.26, 1.47, 1.72, 2.04 393 (527) 425 (570) 474 (636)
3600
MG-5065 A 2.43 368 (493) 400 (536) 448 (601)
Important – See rating definitions, application information, and torsional compatibility notices on * Consult Twin Disc for gasoline engine ratings and required transmission modifications.
pages 24 and 25.
Ratings shown are in SAE Horsepower (HP). Metric Horsepower equals SAE times 1.014.
Weights are approximate and include flywheel housing adapter and flexible input coupling.
26 27
QUICKSHIFT® MARINE TRANSMISSIONS (Continued)
Kilowatts (Horsepower) Maximum
Model Ratios
@ 2300 RPM @ 2500 RPM @ 2800 RPM Speed (rpm)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 423 (567) 455 (610) 503 (675)
MGX-5075 SC
2.53 380 (510) 410 (550) 453 (607) 3500
MG-5075 SC
2.88 373 (500) 403 (540) 434 (582)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 423 (567) 455 (610) 503 (675)
MGX-5075 A
2.53 380 (510) 410 (550) 453 (607) 3500
MG-5075 A
2.88 373 (500) 403 (540) 434 (582)
MGX-5075 IV
1.03, 1.30, 1.49, 1.72, 1.99, 2.46 392 (526) 423 (567) 468 (628) 3500
MG-5075 IV
MG-5075 SC 0.80, 0.92, 1.00, 1.16 380 (510) 410 (550) 453 (607) 3000
@ 2100 RPM @ 2300 RPM @ 2500 RPM
1.05, 1.22, 1.42, 1.76 416 (558) 433 (580) 459 (615)
MG-5085 SC 1.96 374 (502) 410 (550) 445 (597) 3200
2.33 343 (460) 365 (490) 388 (520)
1.05, 1.22, 1.47, 1.72 416 (558) 433 (580) 459 (615)
MG-5085 A 2.04 374 (502) 410 (550) 445 (597) 3200
2.43 343 (460) 365 (490) 388 (520)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28 490 (657) 530 (710) 543 (728)
MG-5082 SC 2.53 462 (620) 492 (660) 521 (699) 3200
2.88 428 (574) 447 (600) 465 (624)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28 490 (657) 530 (710) 543 (728)
MG-5082 A 2.53 462 (620) 492 (660) 521 (699) 3200
2.88 428 (574) 447 (600) 465 (624)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28 490 (657) 530 (710) 543 (728)
MGX-5086 SC 2.53 462 (620) 492 (660) 521 (699) 3200
2.88 428 (574) 447 (600) 465 (624)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28 490 (657) 530 (710) 543 (728)
MGX-5086 A 2.53 462 (620) 492 (660) 521 (699) 3200
2.88 428 (574) 447 (600) 465 (624)
1.17, 1.45, 1.71, 2.04 480 (643) 522 (700) 539 (723)
MG-5091 SC 2.45 433 (580) 474 (635) 500 (670) 3000
2.95 409 (548) 447 (600) 470 (630)
1.45, 1.73, 1.96 484 (649) 530 (710) 539 (723)
MG-5090 A 3000
2.43 433 (580) 474 (635) 500 (670)
MGX-5095 SC 1.15, 1.27, 1.47, 1.71, 2.00, 2.46 544 (730) 597 (800) 634 (850)
3000
MG-5095 SC 2.95 510 (684) 560 (751) 608 (815)
MGX-5095 A 1.28, 1.52, 1.81, 2.04 560 (751) 597 (800) 634 (850)
3000
MG-5095 A 2.48 521 (699) 560 (751) 599 (803)
1.28, 1.52, 1.81, 2.04 618 (829) 671 (900) 718 (963)
MGX-5096 A 3000
2.48 556 (746) 596 (800) 638 (856)
Important – See rating definitions, application information, and torsional compatibility notices on
pages 24 and 25.
28 29
Model Ratios
@ 2100 RPM @ 2300 RPM @ 2500 RPM (rpm)
MGX-5114 SC 0.93, 1.02, 1.12, 1.50, 1.74, 2.04, 2.54 619 (830) 673 (900) 716 (960) 2800 for 0.93:1
MG-5114 SC 3.00 528 (708) 578 (775) 629 (843) 3000 for others
MGX-5114 SC-HD 1.50, 1.74, 2.04, 2.54 619 (830) 673 (900) 716 (960)
3000
MG-5114 SC-HD 3.00 528 (708) 578 (775) 629 (843)
3.28, 3.43, 4.17 619 (830) 673 (900) 701 (940)
MGX-5114 DC
4.59 579 (776) 634 (850) 679 (911) 3000
MG-5114 DC
4.86 567 (760) 604 (810) 634 (850)
MGX-5114 A 1.03, 1.20, 1.48, 1.75, 1.92
619 (830) 673 (900) 701 (940) 3000
MG-5114 A 2.04, 2.50
MGX-5114 RV 1.03, 1.20, 1.48, 1.75, 1.92
619 (830) 673 (900) 701 (940) 3000
MG-5114 RV 2.04, 2.50
MGX-5114 IV 1.05, 1.23, 1.52, 1.80, 1.98 619 (830) 673 (900) 701 (940)
3000
MG-5114 IV 2.57 599 (803) 649 (870) 677 (908)
1.03, 1.20, 1.48, 1.75, 2.04 723 (970) 783 (1050) 816 (1094)
MGX-5126 A 3000
2.50 621 (933) 673 (902) 701 (940)
@ 2100 RPM @ 2300 RPM @ 2450 RPM
1.00, 1.10, 1.28, 1.48, 1.73, 2.04 817 (1096) 895 (1200) 954 (1279)
MGX-5135 SC
2.57 758 (1016) 847 (1136) 901 (1208) 2800
MG-5135 SC
2.90 668 (896) 746 (1000) 794 (1065)
MGX-5135 A 1.16, 1.25, 1.53, 1.79, 2.00 817 (1096) 895 (1200) 954 (1279)
2800
MG-5135 A 2.52 758 (1016) 847 (1136) 901 (1208)
MGX-5135 RV 1.16, 1.25, 1.53, 1.79, 2.00 817 (1096) 895 (1200) 954 (1279)
2800
MG-5135 RV 2.52 758 (1016) 847 (1136) 901 (1208)
1.00, 1.10, 1.28, 1.48, 1.73, 2.04 817 (1096) 895 (1200) 954 (1279)
MGX-5136 SC 2.57 758 (1016) 847 (1136) 901 (1208) 2800
2.90 668 (896) 746 (1000) 794 (1065)
1.16, 1.25, 1.53, 1.79, 2.00 817 (1096) 895 (1200) 954 (1279)
MGX-5136 A 2800
2.52 758 (1016) 847 (1136) 901 (1208)
1.16, 1.25, 1.53, 1.79, 2.00 817 (1096) 895 (1200) 954 (1279)
MGX-5136 RV 2800
2.52 758 (1016) 847 (1136) 901 (1208)
MGX-5145 SC 1.03, 1.20, 1.33, 1.48, 1.75, 1.96 949 (1273) 1007 (1350) 1050 (1408)
2500
MG-5145 SC 2.50 841 (1128) 916 (1228) 963 (1291)
MGX-5145 A 1.26, 1.48, 1.75, 1.96 949 (1273) 1007 (1350) 1050 (1408)
2500
MG-5145 A 2.50 878 (1177) 956 (1282) 1004 (1346)
MGX-5145 RV 1.26, 1.48, 1.75, 1.96 949 (1273) 1007 (1350) 1050 (1408)
2500
MG-5145 RV 2.50 878 (1177) 956 (1282) 1004 (1346)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5146 SC 2500
2.5 875 (1173) 952 (1277) 1001 (1342)
1.26, 1.48, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5146 A 2500
2.50 931 (1248) 1014 (1360) 1065 (1428)
1.26, 1.48, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5146 RV 2500
2.50 931 (1248) 1014 (1360) 1065 (1428)
pages 24 and 25.
30 31
Model Ratios
@ 2100 RPM @ 2300 RPM @ 2450 RPM (rpm)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5147 SC 2500
2.50 875 (1173) 952 (1277) 1001 (1342)
1.26, 1.48, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5147 A 2500
2.50 931 (1248) 1014 (1360) 1065 (1428)
1.26, 1.48, 1.75, 1.96 1070 (1435) 1142 (1531) 1195 (1603)
MGX-5147 RV 2500
2.50 931 (1248) 1014 (1360) 1065 (1428)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 886 (1188) 969 (1300) 1019 (1366) 2750
MGX-5202 SC
3.48 742 (995) 800 (1073) 841 (1128) (2500 at 1.17:1)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 1029 (1380) 1104 (1480) 1104 (1480) 2750
MGX-5204 SC
3.48 984 (1320) 1081 (1450) 1081 (1450) (2500 at 1.17:1)
1.51, 1.73, 2.07, 2.44 1007 (1350) 1104 (1480) 1104 (1480)
MG-6449 A 2500
2.95 715 (959) 782 (1050) 782 (1050)
1.51, 1.73, 2.07, 2.44 1007 (1350) 1104 (1480) 1104 (1480)
MG-6449 RV 2500
2.95 715 (959) 782 (1050) 782 (1050)
2.46, 3.03, 3.48 1335 (1790) 1462 (1961) 1557 (2088)
MGX-6598 DC 3.93 1226 (1644) 1343 (1801) 1399 (1876) 2500
4.43 1070 (1435) 1172 (1572) 1249 (1674)
1.07, 1.30, 1.50, 1.66 1326 (1778) 1452 (1947) 1518 (2036)
1.74, 1.97, 2.04, 2.19 1295 (1737) 1418 (1902) 1510 (2024)
MGX-6599 SC 2500
2.45 1226 (1644) 1343 (1801) 1431 (1919)
2.82 1056 (1416) 1156 (1550) 1232 (1652)
1.34, 1.51, 1.74, 2.03, 2.24, 2.48 1295 (1737) 1418 (1902) 1510 (2024)
MGX-6599 A 2500
2.80 1056 (1416) 1156 (1550) 1232 (1652)
1.34, 1.51, 1.74, 2.03, 2.24 1295 (1737) 1418 (1902) 1510 (2024)
MGX-6599 RV 2.48 1226 (1644) 1343 (1801) 1431 (1919) 2500
2.80 1056 (1416) 1156 (1550) 1232 (1652)
3.30, 4.11 1319 (1769) 1445 (1938) 1539 (2064)
4.68, 4.72 1225 (1643) 1342 (1800) 1430 (1918)
MG-6600 DC 2500
5.21 1103 (1479) 1208 (1620) 1287 (1726)
6.05 987 (1324) 1081 (1450) 1152 (1545)
1.15, 1.33, 1.53, 1.73, 2.03, 2.32, 2.44 1430 (1918) 1566 (2100) 1668 (2237)
MGX-6620 SC 2500
2.72 1342 (1800) 1470 (1971) 1556 (2087)
1.55, 1.72, 2.09, 2.28, 2.42 1430 (1918) 1566 (2100) 1668 (2237)
MGX-6620 A 2500
2.73 1373 (1841) 1504 (2017) 1602 (2148)
1.55, 1.72, 2.09, 2.28, 2.42 1430 (1918) 1566 (2100) 1668 (2237)
MGX-6620 RV 2500
2.73 1357 (1820) 1470 (1971) 1536 (2060)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6650 SC 1430 (1918) 1566 (2100) 1602 (2148)
2.47, 2.81, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6690 SC 1534 (2057) 1680 (2253) 1790 (2400)
2.47, 2.81, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 1864 (2500) 2028 (2720) —
2.37, 2.47 1864 (2500) 2028 (2720) 2147 (2879) 2300 (1.51-2.03)
MGX-6848 SC
2.58, 2.93 1746 (2341) 1891(2536) 2001 (2682) 2500 (2.37-3.21)
3.21 1526 (2046) 1653 (2217) 1748 (2343)
pages 24 and 25.
32 33
Model Ratios
@ 1600 RPM @ 1800 RPM @ 2100 RPM (rpm)
1.18, 1.54, 2.06, 2.29, 2.52 1693 (2270) 1905 (2555) 2222 (2980)
2.92 1648 (2210) 1854 (2486) 2163 (2900)
MG-6984 SC 2100
3.25 1466 (1966) 1649 (2211) 1924 (2580)
3.43 1364 (1829) 1534 (2057) 1790 (2400)
1.48, 1.97, 2.50 1693 (2270) 1905 (2555) 2222 (2980)
MG-6984 A 2.79 1682 (2256) 1892 (2537) 2207 (2960) 2100
2.93 1642 (2202) 1847 (2477) 2155 (2890)
1.48, 1.97, 2.50 1693 (2270) 1905 (2555) 2222 (2980)
MG-6984 RV 2.79 1682 (2256) 1892 (2537) 2207 (2960) 2100
2.93 1642 (2202) 1847 (2477) 2155 (2890)
MGX-61000 SC 2.22, 2.54, 2.63, 2.72, 3.03, 3.39 Please contact Twin Disc 2100
1.16, 1.52, 2.08, 2.47 2176 (2918) 2448 (3283) 2856 (3830)
MG-61242 SC 2100
2.96 2091 (2804) 2353 (3155) 2745 (3681)
1.42, 2.07, 2.44 2176 (2918) 2448 (3283) 2856 (3830)
MG-61242 A 2100
2.93 2074 (2781) 2333 (3129) 2722 (3650)
1.42, 2.07, 2.44 2176 (2918) 2448 (3283) 2856 (3830)
MG-61242 RV 2100
2.93 2074 (2781) 2333 (3129) 2722 (3650)
1.84, 1.98, 2.26, 2.39, 2.45
MGX-61500 SC Please contact Twin Disc 2100
2.56, 2.86, 2.97, 3.03, 3.41
pages 24 and 25.
34 35
LIGHT DUTY RATINGS FOR STANDARD &
Model Ratios
@ 2300 RPM @ 2500 RPM @ 2800 RPM (rpm)
1.00, 1.23, 1.53, 1.71, 2.04 211 (283) 228 (306) 254 (341)
MG-5050 SC* 2.45 211 (283) 216 (290) 223 (299) 3300 (5500*)
3.00 187 (251) 198 (266) 216 (290)
1.12, 1.26, 1.50, 1.80, 2.04 211 (283) 228 (306) 254 (341)
MG-5050 A* 3300 (5500*)
2.50 187 (251) 204 (274) 223 (299)
1.12, 1.26, 1.50, 1.80, 2.04 211 (283) 228 (306) 254 (341)
MG-5050 RV* 3300 (5500*)
2.50 187 (251) 204 (274) 223 (299)
1.15, 1.48, 1.77, 2.00 265 (355) 288 (386) 323 (433)
MG-5061 SC* 2.43 246 (330) 268 (360) 300 (402) 3300 (5500*)
3.00 229 (307) 248 (333) 279 (374)
1.13, 1.28, 1.54, 1.75 257 (345) 281 (377) 313 (420)
MG-5061 A* 3300 (5500*)
2.00, 2.47 246 (330) 268 (360) 300 (402)
1.13, 1.28, 1.54, 1.75 257 (345) 281 (377) 313 (420)
MG-5061 RV* 3300*
2.00, 2.47 246 (330) 268 (360) 300 (402)
1.19, 1.53, 1.83 265 (355) 292 (392) 331 (444)
MG-5062 IV* 3300 (5500*)
2.07, 2.51 246 (330) 268 (360) 300 (402)
MGX-5065 SC 1.08, 1.26, 1.47, 1.72, 2.04 376 (504) 407 (546) 453 (607)
3600
MGX-5065 A 2.43 351 (471) 381 (511) 428 (574)
1.08, 1.26, 1.47, 1.72, 2.04 376 (504) 407 (546) 453 (607)
MG-5065 SC 3600
2.43 351 (471) 381 (511) 428 (574)
1.08, 1.26, 1.47, 1.72, 2.04 376 (504) 407 (546) 453 (607)
MG-5065 A 3600
2.43 351 (471) 381 (511) 428 (574)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 368 (493) 390 (523) 433 (581)
MGX-5075 SC
2.53 355 (476) 383 (514) 423 (567) 3500
MG-5075 SC
2.88 348 (467) 375 (503) 406 (544)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 368 (493) 390 (523) 433 (581)
MGX-5075 A
2.53 355 (476) 383 (514) 423 (567) 3500
MG-5075 A
2.88 348 (467) 375 (503) 406 (544)
MGX-5075 IV
1.03, 1.30, 1.49, 1.72, 1.99, 2.46 355 (476) 383 (514) 423 (567) 3500
MG-5075 IV
MG-5075 SC 0.80, 0.92, 1.00, 1.16 355 (476) 383 (514) 423 (567) 3000
@ 2100 RPM @ 2300 RPM @ 2500 RPM
1.05, 1.22, 1.42, 1.76 389 (522) 404 (542) 429 (575)
MG-5085 SC 1.96 348 (467) 383 (514) 416 (558) 3200
2.33 321 (430) 342 (459) 362 (485)
1.05, 1.22, 1.47, 1.72 389 (522) 404 (542) 429 (575)
MG-5085 A 2.04 355 (476) 383 (514) 416 (558) 3200
2.43 321 (430) 342 (459) 362 (485)
Important – See rating definitions, application information, and torsional compatibility notices on * Consult Twin Disc for gasoline engine ratings and required transmission modifications.
pages 24 and 25.
36 37
Model Ratios
@ 2100 RPM @ 2300 RPM @ 2500 RPM (rpm)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 432 (579) 460 (617) 487 (653)
MG-5082 SC 3200
2.88 400 (536) 418 (560) 434 (582)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 432 (579) 460 (617) 487 (653)
MG-5082 A 3200
2.88 400 (536) 418 (560) 434 (582)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 432 (579) 460 (617) 487 (653)
MGX-5086 SC 3200
2.88 400 (536) 418 (560) 434 (582)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 432 (579) 460 (617) 487 (653)
MGX-5086 A 3200
2.88 400 (536) 418 (560) 434 (582)
1.17, 1.45, 1.71, 2.04 429 (575) 471 (632) 495 (664)
MG-5091 SC 2.45 404 (542) 442 (593) 467 (626) 3000
2.95 382 (512) 418 (561) 439 (589)
1.45, 1.73, 1.96 429 (575) 471 (632) 494 (662)
MG-5090 A 3000
2.43 404 (542) 442 (593) 434 (626)
MGX-5095 SC 1.15, 1.27, 1.47, 1.71, 2.00, 2.46 525 (704) 560 (751) 593 (795)
3000
MG-5095 SC 2.95 481 (645) 522 (700) 554 (743)
MGX-5095 A 1.28, 1.52, 1.81, 2.04 525 (704) 560 (751) 594 (797)
3000
MG-5095 A 2.48 485 (650) 522 (700) 558 (748)
1.28, 1.52, 1.81, 2.04 560 (751) 597 (801) 633 (849)
MGX-5096A 3000
2.48 520 (697) 559 (750) 598 (802)
MGX-5114 SC 0.93, 1.02, 1.12, 1.50, 1.74, 2.04, 2.54 579 (776) 629 (843) 669 (897) 2800 at .93:1
MG-5114 SC 3.00 494 (662) 540 (724) 588 (789) 3000 for others
MGX-5114 SC-HD 1.50, 1.74, 2.04, 2.54 579 (776) 629 (843) 669 (897)
3000
MG-5114 SC-HD 3.00 494 (662) 540 (724) 588 (789)
3.28, 3.43, 4.17 579 (776) 629 (843) 656 (880)
MGX-5114 DC
4.59 542 (727) 591 (793) 634 (850) 3000
MG-5114 DC
4.86 530 (711) 565 (758) 575 (771)
MGX-5114 A 1.03, 1.20, 1.48, 1.75, 1.92
580 (777) 629 (843) 655 (878) 3000
MG-5114 A 2.04, 2.50
MGX-5114 RV 1.03, 1.20, 1.48, 1.75, 1.92
580 (777) 629 (843) 655 (878) 3000
MG-5114 RV 2.04, 2.50
MGX-5114 IV 1.05, 1.23, 1.52, 1.80, 1.98 580 (777) 629 (843) 655 (878)
3000
MG-5114 IV 2.57 560 (751) 607 (814) 632 (848)
1.03, 1.20, 1.48, 1.75, 2.04 675 (905) 732 (982) 763 (1023)
MGX-5126 A 3000
2.50 580 (778) 629 (843) 656 (880)
pages 24 and 25.
38 39
Model Ratios
@ 2100 RPM @ 2300 RPM @ 2500 RPM (rpm)
1.00, 1.10, 1.28, 1.48, 1.73, 2.04 704 (944) 746 (1000) 788 (1057)
MGX-5135 SC
2.57 663 (889) 716 (960) 768 (1030) 2800
MG-5135 SC
2.90 622 (834) 671 (900) 720 (966)
MGX-5135 A 1.16, 1.25, 1.53, 1.79, 2.00 704 (944) 746 (1000) 788 (1057)
2800
MG-5135 A 2.52 663 (889) 716 (960) 768 (1030)
MGX-5135 RV 1.16, 1.25, 1.53, 1.79, 2.00 704 (944) 746 (1000) 788 (1057)
2800
MG-5135 RV 2.52 663 (889) 716 (960) 768 (1030)
1.00, 1.10, 1.28, 1.48, 1.73, 2.04 704 (944) 746 (1000) 788 (1057)
MGX-5136 SC 2.57 663 (889) 716 (960) 768 (1030) 2800
2.90 622 (834) 671 (900) 720 (966)
1.16, 1.25, 1.53, 1.79, 2.00 704 (944) 746 (1000) 788 (1057)
MGX-5136 A 2800
2.52 663 (889) 716 (960) 768 (1030)
1.16, 1.25, 1.53, 1.79, 2.00 704 (944) 746 (1000) 788 (1057)
MGX-5136 RV 2800
2.52 663 (889) 716 (960) 768 (1030)
MGX-5145 SC 1.03, 1.20, 1.33, 1.48, 1.75, 1.96 808 (1084) 857 (1150) 906 (1215)
2500
MG-5145 SC 2.50 759 (1018) 820 (1100) 881 (1181)
MGX-5145 A 1.26, 1.48, 1.75, 1.96 808 (1084) 857 (1150) 906 (1215)
2500
MG-5145 A 2.50 759 (1018) 820 (1100) 881 (1181)
MGX-5145 RV 1.26, 1.48, 1.75, 1.96 808 (1084) 857 (1150) 906 (1215)
2500
MG-5145 RV 2.50 759 (1018) 820 (1100) 881 (1181)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5146 SC 2500
2.50 828 (1110) 895 (1200) 961 (1289)
1.26, 1.48, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5146 A 2500
2.50 828 (1110) 895 (1200) 961 (1289)
1.26, 1.48, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5146 RV 2500
2.50 828 (1110) 895 (1200) 961 (1289)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5147 SC 2500
2.50 828 (1110) 895 (1200) 961 (1289)
1.26, 1.48, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5147 A 2500
2.50 828 (1110) 895 (1200) 961 (1289)
1.26, 1.48, 1.75, 1.96 918 (1231) 974 (1306) 1028 (1379)
MGX-5147 RV 2500
2.50 828 (1110) 895 (1200) 961 (1289)
@ 1800 RPM @ 2100 RPM @ 2300 RPM
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 742 (995) 852 (1142) 924 (1239)
MGX-5202 SC 2750
3.48 641 (860) 731 (980) 789 (1059)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 742 (995) 865 (1160) 979 (1313)
MGX-5204 SC 2750
3.48 647 (868) 764 (1025) 837 (1122)
1.51, 1.73 840 (1126) 978 (1312) 1072 (1437)
2.07 795 (1067) 912 (1223) 974 (1306)
MG-6449 A 2500
2.44 711 (953) 805 (1080) 861 (1154)
2.95 545 (731) 635 (852) 696 (933)
1.51, 1.73 840 (1126) 978 (1312) 1072 (1437)
2.07 795 (1067) 912 (1223) 974 (1306)
MG-6449 RV 2500
2.44 711 (953) 805 (1080) 861 (1154)
2.95 545 (731) 635 (852) 696 (933)
2.46, 3.03 1000 (1341) 1167 (1565) 1278 (1714)
3.48 1000 (1341) 1155 (1549) 1241 (1664)
MGX-6598 DC 2500
3.93 952 (1277) 1060 (1421) 1131 (1517)
4.43 862 (1156) 990 (1328) 1055 (1415)
1.07, 1.30, 1.50, 1.66, 1.74 1010 (1354) 1178 (1580) 1244 (1668)
1.97, 2.04, 2.19 1001 (1342) 1167 (1565) 1234 (1655)
MGX-6599 SC 2500
2.45 920 (1234) 1073 (1439) 1164 (1561)
2.82 821 (1101) 955 (1281) 1042 (1397)
pages 24 and 25.
40 41
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.34, 1.51, 1.74, 2.03, 2.24 1092 (1464) 1221 (1637) 1301 (1745)
MGX-6599 A 2.48 935 (1254) 1091 (1463) 1195 (1602) 2500
2.80 896 (1202) 1045 (1401) 1144 (1534)
1.34, 1.51, 1.74, 2.03, 2.24 1092 (1464) 1221 (1637) 1301 (1745)
MGX-6599 RV 2.48 935 (1254) 1091 (1463) 1195 (1602) 2500
2.80 896 (1202) 1045 (1401) 1144 (1534)
3.30, 4.11 1009 (1353) 1177 (1578) 1289 (1728)
4.68, 4.72 926 (1242) 1080 (1448) 1182 (1585)
MG-6600 DC 2500
5.22 818 (1097) 953 (1278) 1044 (1400)
6.05 722 (968) 843 (1129) 923 (1237)
1.15 1109 (1487) 1294 (1735) 1338 (1794)
MGX-6620 SC 1.33, 1.53, 1.73, 2.03, 2.32, 2.44 1109 (1487) 1294 (1735) 1417 (1900) 2500
2.72 1080 (1448) 1255 (1683) 1338 (1794)
1.55, 1.72, 2.09, 2.28, 2.42 1106 (1483) 1294 (1735) 1417 (1900)
MGX-6620 A 2500
2.73 1105 (1482) 1248 (1674) 1330 (1784)
1.55, 1.72 1122 (1505) 1309 (1755) 1434 (1923)
MGX-6620 RV 2.09, 2.28, 2.42 1122 (1505) 1262 (1692) 1345 (1804) 2500
2.73 1030 (1381) 1147 (1538) 1223 (1640)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6650 SC 1225 (1643) 1417 (1900) 1464 (1963)
2.47, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6690 SC 1225 (1643) 1417 (1900) 1464 (1963)
2.47, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37, 2.47 1591 (2134) 1828 (2451) 1985 (2662)
2300 (1.51-2.03)
MGX-6848 SC 2.58, 2.81, 2.93 1483 (1989) 1699 (2278) 1841 (2469)
2500 (2.37-3.21)
3.21 1297 (1739) 1485 (1991) 1609 (2158)
@ 1600 RPM @ 1800 RPM @ 2100 RPM
1.18, 1.54, 2.06, 2.29, 2.52 1614 (2164) 1816 (2435) 2119 (2842)
2.92 1528 (2049) 1719 (2305) 2006 (2690)
MG-6984 SC 2100
3.25 1269 (1702) 1427 (1914) 1665 (2233)
3.43 1180 (1582) 1328 (1781) 1549 (2077)
1.48, 1.97 1602 (2148) 1802 (2416) 2102 (2819)
2.50 1552 (2081) 1746 (2341) 2037 (2732)
MG-6984 A 2100
2.79 1536 (2060) 1728 (2317) 2016 (2703)
2.93 1512 (2028) 1701 (2281) 1984 (2661)
1.48, 1.97 1602 (2148) 1802 (2416) 2102 (2819)
2.50 1552 (2081) 1746 (2341) 2037 (2732)
MG-6984 RV 2100
2.79 1536 (2060) 1728 (2317) 2016 (2703)
2.93 1512 (2028) 1701 (2281) 1984 (2661)
1.16, 1.52, 2.08 2064 (2768) 2322 (3114) 2709 (3633)
MG-61242 SC 2.47 2207 (2691) 2258 (3028) 2634 (3532) 2100
2.96 1950 (2615) 2193 (2941) 2559 (3432)
1.42, 2.07 2090 (2803) 2351 (3153) 2743 (3678)
MG-61242 A 2.44 2207 (2691) 2258 (3028) 2634 (3532) 2100
2.93 1950 (2615) 2193 (2941) 2559 (3432)
1.42, 2.07 2090 (2803) 2351 (3153) 2743 (3678)
MG-61242 RV 2.44 2207 (2691) 2258 (3028) 2634 (3532) 2100
2.93 1950 (2615) 2193 (2941) 2559 (3432)
1.84, 1.98, 2.26, 2.39, 2.45
2.56, 2.86, 2.97, 3.03, 3.41
pages 24 and 25.
42 43
INTERMEDIATE DUTY RATINGS FOR STANDARD &
Model Ratios
@ 2100 RPM @ 2500 RPM @ 2800 RPM (rpm)
1.45 24 (32) 26 (35) 26 (35)
MG-340 2.00 17 (23) 20 (27) 23 (31) 4500
2.60 13 (17) 15 (20) 18 (24)
1.55 31 (42) 36 (48) 41 (55)
2.00 28 (38) 33 (44) 37 (50)
MG-360 5000
2.45 23 (31) 29 (39) 31 (42)
2.83 19 (26) 22 (30) 25 (34)
1.54, 2.00 47 (63) 56 (75) 63 (85)
MG-5005 A 4500
2.47 35 (47) 41 (55) 47 (63)
1.51 93 (124) 110 (148) 124 (166)
2.09 81 (108) 96 (129) 108 (144)
MG-5012 SC 4500
2.40 72 (96) 85 (115) 96 (128)
2.78 62 (84) 74 (100) 83 (111)
1.50, 2.04 134 (179) 159 (214) 178 (239)
MG-5020 SC 2.50 107 (144) 128 (171) 143 (192) 4000
2.94 93 (124) 110 (148) 124 (166)
1.52, 2.09 81 (109) 97 (130) 108 (145)
MG-5025 A 4500
2.40 69 (93) 82 (110) 92 (123)
1.53, 2.08 147 (197) 175 (235) 196 (263)
MG-5055 A 4000
2.60 99 (135) 118 (160) 132 (179)
1.00, 1.23, 1.53, 1.71, 2.04, 2.45 157 (211) 187 (251) 209 (280)
MG-5050 SC 3300
3.00 142 (190) 170 (228) 194 (260)
MG-5050 A 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 157 (211) 187 (251) 209 (280) 3300
MG-5050 RV 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 157 (211) 187 (251) 209 (280) 3300
MG-5061 SC 1.15, 1.48, 1.77, 2.00, 2.43, 3.00 201 (270) 239 (320) 261 (350) 3300
MG-5061 A 1.13, 1.28, 1.54, 1.75, 2.00, 2.47 201 (270) 239 (320) 261 (350) 3300
MG-5061 RV 1.13, 1.28, 1.54, 1.75, 2.00, 2.47 201 (270) 239 (320) 261 (350) 3300
MG-5062 IV 1.19, 1.53, 1.83, 2.07, 2.51 201 (270) 239 (320) 261 (350) 3300
MGX-5065 SC 1.08, 1.26, 1.47, 1.72, 2.04 279 (374) 329 (441) 367 (492)
3600
MG-5065 SC 2.43 254 (341) 302 (405) 338 (453)
MGX-5065 A 1.08, 1.26, 1.47, 1.72, 2.04 279 (374) 329 (441) 367 (492)
3600
MG-5065 A 2.43 254 (341) 302 (405) 338 (453)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 283 (380) 310 (416) 324 (434)
MGX-5075 SC
2.53 268 (360) 298 (400) 313 (420) 3500
MG-5075 SC
2.88 261 (350) 287 (385) 306 (410)
1.06, 1.22, 1.33, 1.53, 1.77, 2.05 283 (380) 310 (416) 324 (434)
MGX-5075 A
2.53 268 (360) 298 (400) 313 (420) 3500
MG-5075 A
2.88 261 (350) 287 (385) 306 (410)
MGX-5075 IV
1.03, 1.30, 1.49, 1.72, 1.99, 2.46 268 (360) 298 (400) 313 (420) 3500
MG-5075 IV
MG-5075 SC 0.80, 0.92, 1.00, 1.16 268 (360) 298 (400) 313 (420) 3000
pages 24 and 25.
44 45
Model Ratios
@ 2100 RPM @ 2500 RPM @ 2800 RPM (rpm)
1.05, 1.22, 1.42, 1.76, 1.96 287 (385) 332 (445) 365 (490)
MG-5085 SC 3200
2.33 268 (360) 302 (405) 328 (440)
1.05, 1.22, 1.47, 1.72, 2.04 287 (385) 332 (445) 365 (490)
MG-5085 A 3200
2.43 268 (360) 302 (405) 328 (440)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 351 (471) 396 (531) 428 (574)
MG-5082 SC 3200
2.88 340 (456) 384 (515) 415 (557)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 351 (471) 396 (531) 428 (574)
MG-5082 A 3200
2.88 340 (456) 384 (515) 415 (557)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 351 (471) 396 (531) 428 (574)
MGX-5086 SC 3200
2.88 340 (456) 384 (515) 415 (557)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 351 (471) 396 (531) 428 (574)
MGX-5086 A 3200
2.88 340 (456) 384 (515) 415 (557)
1.17, 1.45, 1.71, 2.04 354 (475) 403 (540) 425 (570)
MG-5091 SC 2.45, 2.95 336 (450) 374 (501) 403 (540) 3000
3.33 268 (360) 309 (415) 346 (464)
3.82 321 (431) 377 (506) 420 (563)
MG-5091 DC 4.50 298 (400) 350 (470) 384 (515) 3000
5.05 251 (336) 298 (400) 334 (448)
1.45, 1.73, 1.96 343 (460) 365 (490) 382 (512)
MG-5090 A 3000
2.43 321 (430) 343 (460) 359 (481)
@ 1800 RPM @ 2100 RPM @ 2300 RPM
MGX-5095 SC 1.15, 1.27, 1.47, 1.71, 2.00, 2.46 368 (493) 410 (550) 438 (587)
3000
MG-5095 SC 2.95 332 (445) 380 (510) 412 (552)
MGX-5095 A 1.28, 1.52, 1.81, 2.04 367 (492) 410 (550) 438 (587)
3000
MG-5095 A 2.48 336 (451) 380 (510) 409 (548)
1.28, 1.52, 1.81, 2.04 367 (492) 410 (550) 438 (587)
MGX-5096 A 3000
2.48 336 (451) 380 (510) 409 (548)
0.93, 1.02, 1.12, 1.50, 1.74, 2.04 448 (601) 504 (676) 552 (740)
MGX-5114 SC 2800 at .93:1
2.54 410 (550) 466 (625) 500 (671)
MG-5114 SC 3000 for others
3.00 380 (510) 451 (605) 492 (660)
1.50, 1.74, 2.04 448 (601) 504 (676) 552 (740)
MGX-5114 SC-HD
2.54 410 (550) 466 (625) 500 (671) 3000
MG-5114 SC-HD
3.00 380 (510) 451 (605) 492 (660)
3.28, 3.43, 4.17 431 (580) 504 (676) 537 (720)
MGX-5114 DC
4.59 388 (520) 448 (601) 477 (640) 3000
MG-5114 DC
4.86 375 (503) 429 (575) 463 (621)
MGX-5114 A 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 404 (542) 466 (625) 504 (676)
3000
MG-5114 A 2.50 351 (471) 400 (536) 433 (581)
MGX-5114 RV 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 404 (542) 466 (625) 504 (676)
3000
MG-5114 RV 2.50 351 (471) 400 (536) 433 (581)
MGX-5114 IV 1.05, 1.23, 1.52, 1.80, 1.98 404 (542) 466 (625) 504 (676)
3000
MG-5114 IV 2.57 351 (471) 400 (536) 433 (581)
pages 24 and 25.
46 47
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.03, 1.20, 1.48, 1.75, 2.04 404 (542) 466 (625) 504 (676)
MGX-5126 A 3000
2.50 351 (471) 400 (536) 433 (581)
1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 529 (709) 560 (751) 600 (805)
MGX-5135 SC 2800
2.90 493 (661) 522 (700) 560 (751)
MGX-5135 A 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
MGX-5135 RV 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 529 (709) 560 (751) 600 (805)
MG-5135 SC 2800
2.90 493 (661) 522 (700) 560 (751)
MG-5135 A 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
MG-5135 RV 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 529 (709) 560 (751) 600 (805)
MGX-5136 SC 2800
2.90 493 (661) 522 (700) 560 (751)
MGX-5136 A 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
MGX-5136 RV 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 529 (709) 560 (751) 600 (805) 2800
MGX-5145 SC 1.03, 1.20, 1.33, 1.48, 1.75, 1.96 698 (936) 746 (1000) 836 (1121)
2500
MG-5145 SC 2.50 587 (787) 671 (900) 726 (974)
MGX-5145 A 1.26, 1.48, 1.75, 1.96 698 (936) 746 (1000) 836 (1121)
2500
MG-5145 A 2.50 587 (787) 671 (900) 726 (974)
MGX-5145 RV 1.26, 1.48, 1.75, 1.96 698 (936) 746 (1000) 836 (1121)
2500
MG-5145 RV 2.50 587 (787) 671 (900) 726 (974)
1.20, 1.33, 1.57, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5146 SC 2500
2.50 615 (825) 702 (941) 760 (1019)
1.26, 1.48, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5146 A 2500
2.50 615 (825) 702 (941) 760 (1019)
1.26, 1.48, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5146 RV 2500
2.50 615 (825) 702 (941) 760 (1019)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5147 SC 2500
2.50 615 (825) 702 (941) 760 (1019)
1.26, 1.48, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5147 A 2500
2.50 615 (825) 702 (941) 760 (1019)
1.26, 1.48, 1.75, 1.96 753 (1010) 806 (1081) 903 (1211)
MGX-5147 RV 2500
2.50 615 (825) 702 (941) 760 (1019)
pages 24 and 25.
48 49
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
3.06 530 (711) 573 (768) 594 (797)
3.50 518 (695) 549 (736) 569 (763)
4.04 494 (662) 521 (699) 540 (724)
MGX-516 2500
4.52 484 (649) 510 (684) 526 (705)
5.05 468 (628) 492 (660) 508 (681)
6.00 419 (562) 470 (630) 498 (668)
3.12, 3.54, 4.06, 4.50, 5.03, 5.95 537 (720) 578 (775) 578 (775)
MGX-5170 DC 2500
6.53, 6.95 467 (626) 545 (731) 561 (752)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 2750
MGX-5202 SC 630 (845) 720 (966) 778 (1043)
3.48 (2500 at 1.17:1)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 727 (975) 858 (1151) 969 (1299) 2750
MGX-5204 SC
3.48 630 (845) 720 (966) 781 (1047) (2500 at 1.17:1)
MGX-5222 DC 4.03, 4.59, 5.04, 6.10, 6.55, 6.96 630 (845) 720 (966) 778 (1043) 2500
MGX-5225 DC 4.03, 4.59, 5.04, 5.57, 6.10 727 (975) 858 (1151) 869 (1165) 2500
3.35, 4.06, 4.42, 4.96, 5.46, 5.96 1044 (1400) 1163 (1560) 1178 (1580)
MGX-5321 DC 2400
6.39 893 (1198) 1022 (1371) 1108 (1486)
@ 1600 RPM @ 1800 RPM @ 2100 RPM
1.93, 2.58, 2.90, 3.26 1049 (1407) 1180 (1582) — 1900
3.91 893 (1198) 1011 (1356) 1193 (1600) 2400
4.10, 4.60 1049 (1407) 1180 (1582) — 1900
MG-540
5.17 1038 (1392) 1168 (1566) 1362 (1826) 2100
(with flexible coupling)
6.18 867 (1163) 975 (1307) 1138 (1526) 2400
7.00 766 (1027) 861 (1155) 1005 (1348) 2400
7.47 718 (963) 808 (1084) 943 (1265) 2400
4.03, 4.55, 4.96, 5.44 1323 (1774) 1489 (1998) —
MG-5506 2000
6.00 1197 (1605) 1347 (1806) —
2.53, 2.98, 3.51, 4.03 1602 (2148) 1805 (2421) 2105 (2823)
4.63, 5.04 1602 (2148) 1805 (2421) 2095 (2809)
MGX-5600 2100
5.76 1598 (2143) 1760 (2360) 1770 (2374)
6.04 1353 (1814) 1502 (2014) 1717 (2302)
@ 1800 RPM @ 2100 RPM @ 2300 RPM
1.51, 1.73 769 (1031) 897 (1203) 958 (1285)
2.07 639 (857) 746 (1000) 794 (1065)
MG-6449 A 2500
2.44 555 (744) 647 (868) 692 (928)
2.95 496 (665) 577 (774) 617 (828)
1.51, 1.73 769 (1031) 897 (1203) 958 (1285)
2.07 639 (857) 746 (1000) 794 (1065)
MG-6449 RV 2500
2.44 555 (744) 647 (868) 692 (928)
2.95 496 (665) 577 (774) 617 (828)
2.46, 3.03 882 (1183) 1000 (1341) 1067 (1431)
3.48 849 (1139) 945 (1267) 1008 (1352)
MGX-6598 DC 2500
3.93 774 (1038) 861 (1155) 918 (1231)
4.43 722 (968) 804 (1078) 857 (1149)
1.07, 1.30, 1.50, 1.66, 1.74, 1.97, 2.04 862 (1156) 960 (1287) 1023 (1372)
MGX-6599 SC 2.19, 2.45 844 (1132) 940 (1261) 1002 (1344) 2500
2.82 728 (976) 811 (1088) 864 (1159)
pages 24 and 25.
50 51
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.34, 1.51, 1.74, 2.03, 2.24 890 (1193) 992 (1330) 1057 (1417)
MGX-6599 A 2.48 841 (1128) 937 (1257) 999 (1340) 2500
2.80 815 (1093) 908 (1218) 967 (1297)
1.34, 1.51, 1.74, 2.03, 2.24 890 (1193) 992 (1330) 1057 (1417)
MGX-6599 RV 2.48 841 (1128) 937 (1257) 999 (1340) 2500
2.80 815 (1093) 908 (1218) 967 (1297)
3.30 819 (1098) 955 (1281) 1046 (1403)
4.11 819 (1098) 955 (1281) 1018 (1365)
MG-6600 DC 4.68, 4.72 777 (1042) 906 (1215) 966 (1295) 2500
5.21 693 (929) 809 (1085) 886 (1188)
6.05 617 (828) 719 (964) 788 (1057)
1.15, 1.33, 1.53, 1.73 1047 (1404) 1166 (1564) 1191 (1597)
2.03 1025 (1375) 1142 (1531) 1184 (1588)
MGX-6620 SC 2.32 1019 (1366) 1136 (1523) 1184 (1588) 2500
2.44 987 (1324) 1100 (1475) 1172 (1572)
2.72 915 (1227) 1019 (1366) 1086 (1456)
1.55, 1.72, 2.09 1103 (1479) 1234 (1655) 1315 (1763)
MGX-6620 A 2.28, 2.42 1028 (1379) 1145 (1535) 1220 (1636) 2500
2.73 910 (1220) 1014 (1360) 1080 (1448)
1.55 1031 (1383) 1149 (1541) 1224 (1641)
1.72 998 (1338) 1112 (1491) 1185 (1589)
MGX-6620 RV 2.09 947 (1270) 1055 (1415) 1125 (1509) 2500
2.28, 2.42 920 (1234) 1025 (1375) 1092 (1464)
2.73 836 (1121) 932 (1250) 993 (1332)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6650 SC 1069 (1434) 1268 (1700) 1386 (1859)
2.47, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37, 2.47 1201 (1611) 1380 (1851) 1438 (1928)
2300 (1.51-2.03)
MGX-6690 SC 2.93 1201 (1611) 1318 (1767) 1386 (1859)
2500 (2.37-3.21)
3.21 1201 (1611) 1280 (1716) 1386 (1859)
1.51, 1.88, 2.03, 2.37, 2.47, 2.58, 2.81, 2.93 1342 (1800) 1566 (2100) 1715 (2300) 2300 (1.51-2.03)
MGX-6848 SC
3.21 1269 (1702) 1453 (1948) 1575 (2112) 2500 (2.37-3.21)
@ 1600 RPM @ 1800 RPM @ 2100 RPM
1.18, 1.54, 2.06, 2.29, 2.52, 2.92 1470 (1971) 1654 (2218) 1929 (2587)
MG-6984 SC 3.25 1244 (1668) 1399 (1876) 1632 (2189) 2100
3.43 1000 (1341) 1125 (1509) 1313 (1761)
1.48, 1.97, 2.50, 2.79 1504 (2017) 1692 (2269) 1974 (2647)
MG-6984 A 2100
2.93 1462 (1961) 1645 (2206) 1919 (2573)
1.48, 1.97, 2.50, 2.79 1504 (2017) 1692 (2269) 1974 (2647)
MG-6984 RV 2100
2.93 1462 (1961) 1645 (2206) 1919 (2573)
1.16, 1.52, 2.08 2001 (2683) 2251 (3019) 2626 (3521)
MG-61242 SC 2.47 1960 (2628) 2205 (2957) 2571 (3448) 2100
2.96 1949 (2614) 2193 (2941) 2559 (3432)
1.42, 2.07 2078 (2787) 2338 (3135) 2728 (3658)
MG-61242 A 2100
2.44, 2.93 1949 (2614) 2193 (2941) 2559 (3432)
1.42, 2.07 2078 (2787) 2338 (3135) 2728 (3658)
MG-61242 RV 2100
2.44, 2.93 1949 (2614) 2193 (2941) 2559 (3432)
1.84, 1.98, 2.26, 2.39, 2.45
2.56, 2.86, 2.97, 3.03, 3.41
pages 24 and 25.
52 53
MEDIUM DUTY RATINGS FOR STANDARD &
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.00, 1.23, 1.53, 1.71, 2.04, 2.45 115 (154) 128 (172) 140 (188)
MG-5050 SC 3300
3.00 102 (137) 119 (160) 133 (178)
MG-5050 A 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 115 (154) 128 (172) 140 (188) 3300
MG-5050 RV 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 115 (154) 128 (172) 140 (188) 3300
1.15, 1.48, 1.77, 2.00, 2.43 135 (181) 157 (211) 171 (229)
MG-5061 SC 3300
3.00 126 (169) 147 (197) 160 (215)
1.13, 1.28, 1.54, 1.75, 2.00 135 (181) 157 (211) 171 (229)
MG-5061 A 3300
2.47 126 (169) 147 (197) 160 (215)
1.13, 1.28, 1.54, 1.75, 2.00 135 (181) 157 (211) 171 (229)
MG-5061 RV 3300
2.47 126 (169) 147 (197) 160 (215)
MG-5062 IV 1.19, 1.53, 1.83, 2.07, 2.51 135 (181) 157 (211) 171 (229) 3300
MGX-5065 SC 1.08, 1.26, 1.47, 1.72, 2.04 227 (304) 262 (351) 285 (382)
3600
MG-5065 SC 2.43 208 (279) 243 (326) 266 (357)
MGX-5065 A 1.08, 1.26, 1.47, 1.72, 2.04 227 (304) 262 (351) 285 (382)
3600
MG-5065 A 2.43 208 (279) 243 (326) 266 (357)
MGX-5075 SC 1.06, 1.22, 1.33, 1.53, 1.77, 2.05
205 (275) 230 (308) 246 (330) 3500
MG-5075 SC 2.53, 2.88
MGX-5075 A 1.06, 1.22, 1.33, 1.53, 1.77, 2.05
205 (275) 230 (308) 246 (330) 3500
MG-5075 A 2.53, 2.88
MGX-5075 IV
1.03, 1.30, 1.49, 1.72, 1.99, 2.46 205 (275) 230 (308) 246 (330) 3500
MG-5075 IV
1.05, 1.22, 1.42, 1.76, 1.96 250 (335) 279 (375) 295 (396)
MG-5085 SC 3200
2.33 225 (302) 254 (341) 271 (363)
1.05, 1.22, 1.47, 1.72, 2.04 250 (335) 279 (375) 295 (396)
MG-5085 A 3200
2.43 217 (291) 248 (333) 268 (360)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 301 (404) 336 (451) 350 (469)
MG-5082 SC 3200
2.88 273 (366) 313 (420) 331 (444)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 301 (404) 336 (451) 350 (469)
MG-5082 A 3200
2.88 273 (366) 313 (420) 331 (444)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 301 (404) 336 (451) 350 (469)
MGX-5086 SC 3200
2.88 273 (366) 313 (420) 331 (444)
1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53 301 (404) 336 (451) 350 (469)
MGX-5086 A 3200
2.88 273 (366) 313 (420) 331 (444)
pages 24 and 25.
54 55
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.17, 1.45, 1.71, 2.04 274 (368) 317 (425) 347 (465)
MG-5091 SC 2.45, 2.95 265 (355) 308 (413) 330 (443) 3000
3.33 219 (293) 254 (340) 274 (368)
3.82, 4.50 262 (351) 303 (406) 330 (443)
MG-5091 DC 3000
5.05 210 (281) 245 (328) 268 (359)
1.45, 1.73, 1.96 267 (358) 309 (415) 321 (430)
MG-5090 A 3000
2.43 250 (335) 291 (390) 302 (405)
MGX-5095 SC 1.15, 1.27, 1.47, 1.71, 2.00, 2.46 336 (451) 374 (502) 399 (535)
3000
MG-5095 SC 2.95 319 (428) 360 (483) 385 (516)
MGX-5095 A
1.28, 1.52, 1.81, 2.04, 2.48 319 (428) 358 (480) 385 (516) 3000
MG-5095 A
MGX-5096 A 1.28, 1.52, 1.81, 2.04, 2.48 319 (428) 358 (480) 385 (516) 3000
MGX-5114 SC 0.93, 1.02, 1.12, 1.50, 1.74, 2.04, 2.54 394 (528) 451 (605) 489 (656) 2800 at .93:1
MG-5114 SC 3.00 361 (484) 410 (550) 443 (595) 3000 for others
MGX-5114 SC-HD 1.50, 1.74, 2.04, 2.54 394 (528) 451 (605) 489 (656)
3000
MG-5114 SC-HD 3.00 361 (484) 410 (550) 443 (595)
MGX-5114 DC 3.28, 3.43, 4.17, 4.59, 4.86
361 (484) 419 (562) 437 (586) 3000
MG-5114 DC
MGX-5114 A 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 357 (479) 407 (546) 440 (590)
3000
MG-5114 A 2.50 338 (453) 385 (516) 417 (559)
MGX-5114 RV 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 357 (479) 407 (546) 440 (590)
3000
MG-5114 RV 2.50 338 (453) 385 (516) 417 (559)
MGX-5114 IV 1.05, 1.23, 1.52, 1.80, 1.98 357 (479) 407 (546) 440 (590)
3000
MG-5114 IV 2.57 338 (453) 385 (516) 417 (559)
1.03, 1.20, 1.48, 1.75, 2.04 357 (479) 407 (546) 440 (590)
MGX-5126A 3000
2.50 338 (453) 385 (516) 417 (559)
pages 24 and 25.
56 57
Model Ratios
@ 1600 RPM @ 1800 RPM @ 2100 RPM (rpm)
MGX-5135 SC 1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 447 (599) 485 (650) 542 (727)
2800
MG-5135 SC 2.90 413 (554) 448 (601) 500 (671)
MGX-5135 A
1.16, 1.25, 1.53, 1.79, 2.00, 2.52 447 (599) 485 (650) 542 (727) 2800
MG-5135 A
MGX-5135 RV
1.16, 1.25, 1.53, 1.79, 2.00, 2.52 447 (599) 485 (650) 542 (727) 2800
MG-5135 RV
1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 447 (599) 485 (650) 542 (727)
MGX-5136 SC 2800
2.90 413 (554) 448 (601) 500 (671)
MGX-5136 A 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 447 (599) 485 (650) 542 (727) 2800
MGX-5136 RV 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 447 (599) 485 (650) 542 (727) 2800
MGX-5145 SC 1.03, 1.20, 1.33, 1.48, 1.75, 1.96 553 (742) 596 (800) 637 (854)
2500
MG-5145 SC 2.50 473 (634) 522 (700) 597 (801)
MGX-5145 A 1.26, 1.48, 1.75, 1.96 553 (742) 596 (800) 637 (854)
2500
MG-5145 A 2.50 473 (634) 522 (700) 597 (801)
MGX-5145 RV 1.26, 1.48, 1.75, 1.96 553 (742) 596 (800) 637 (854)
2500
MG-5145 RV 2.50 473 (634) 522 (700) 597 (801)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5146 SC 2500
2.50 500 (671) 552 (740) 631 (846)
1.26, 1.48, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5146 A 2500
2.50 500 (671) 552 (740) 631 (846)
1.26, 1.48, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5146 RV 2500
2.50 500 (671) 552 (740) 631 (846)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5147 SC 2500
2.50 500 (671) 552 (740) 631 (846)
1.26, 1.48, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5147 A 2500
2.50 500 (671) 552 (740) 631 (846)
1.26, 1.48, 1.75, 1.96 623 (835) 671 (900) 714 (957)
MGX-5147 RV 2500
2.50 500 (671) 552 (740) 631 (846)
3.07, 3.50, 4.04, 4.52, 5.05 397 (532) 447 (600) 465 (624)
MGX-516 2500
6.00 365 (489) 406 (544) 425 (570)
3.12, 3.54, 4.06, 4.50, 5.03, 5.95 475 (637) 537 (720) 578 (775)
MGX-5170 DC 2500
6.53, 6.95 415 (557) 459 (615) 499 (669)
1.17, 1.33, 1.53, 1.76, 2.03
MGX-5202 SC 540 (724) 600 (805) 678 (909) 2500
2.48, 2.92, 3.48
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 633 (849) 716 (960) 797 (1069) 2750
MGX-5204 SC
3.48 540 (724) 600 (805) 678 (909) (2500 at 1.17:1)
MGX-5222 DC 4.03, 4.59, 5.04, 6.10, 6.55, 6.96 540 (724) 600 (805) 678 (909) 2500
MGX-5225 DC 4.03, 4.59, 5.04, 5.57, 6.10 644 (864) 727 (975) 787 (1055) 2500
3.35, 4.06, 4.42, 4.96, 5.46 928 (1244) 1044 (1400) 1069 (1434)
MGX-5321 DC 5.96 865 (1160) 970 (1300) 1035 (1388) 2400
6.39 776 (1041) 863 (1157) 967 (1297)
pages 24 and 25.
58 59
Model Ratios
@ 1200 RPM @ 1600 RPM @ 1800 RPM (rpm)
1.93, 2.58, 2.90 787 (1055) 1049 (1407) 1180 (1582) 1900
3.26 869 (1165) 1034 (1387) 1163 (1560) 2100
3.91 648 (869) 864 (1159) 972 (1303) 2400
MG-540 4.10, 4.60 787 (1055) 1049 (1407) 1180 (1582) 1900
(with flexible coupling) 5.17 774 (1038) 1032 (1384) 1161 (1557) 2100
6.18 644 (864) 859 (1152) 966 (1295) 2400
7.00 571 (766) 762 (1022) 857 (1149) 2400
7.47 535 (717) 715 (959) 804 (1078) 2400
4.03, 4.55, 4.96, 5.44 960 (1287) 1281 (1718) 1441 (1932)
MG-5506 2000
6.00 869 (1165) 1159 (1554) 1304 (1749)
2.53, 2.98, 3.51, 4.03, 4.63, 5.04 1230 (1649) 1598 (2143) 1760 (2360)
MGX-5600 5.76 1200 (1609) 1566 (2100) 1737 (2329) 2100
6.04 1016 (1362) 1309 (1755) 1451 (1946)
@ 1600 RPM @ 1800 RPM @ 2100 RPM
1.51, 1.73 680 (912) 741 (994) 833 (1117)
2.07 565 (758) 617 (827) 695 (932)
MG-6449 A 2500
2.44 494 (662) 537 (720) 602 (807)
2.95 435 (583) 489 (656) 570 (764)
1.51, 1.73 680 (912) 741 (994) 833 (1117)
2.07 565 (758) 617 (827) 695 (932)
MG-6449 RV 2500
2.44 494 (662) 537 (720) 602 (807)
2.95 435 (583) 489 (656) 570 (764)
2.46, 3.03 759 (1018) 824 (1105) 918 (1231)
3.48 717 (961) 779 (1045) 868 (1164)
MGX-6598 DC 2500
3.93 653 (876) 710 (952) 790 (1059)
4.43 609 (817) 662 (888) 737 (988)
1.07, 1.30, 1.50, 1.66, 1.74, 1.97, 2.04 713 (956) 774 (1038) 862 (1156)
MGX-6599 SC 2.19, 2.45 713 (956) 774 (1038) 862 (1156) 2500
2.82 615 (825) 668 (896) 744 (998)
1.34, 1.51, 1.74, 2.03, 2.24 754 (1011) 820 (1100) 910 (1220)
MGX-6599 A 2.48 711 (953) 772 (1035) 860 (1153) 2500
2.80 654 (877) 709 (951) 790 (1059)
1.34, 1.51, 1.74, 2.03, 2.24 754 (1011) 820 (1100) 910 (1220)
MGX-6599 RV 2.48 711 (953) 772 (1035) 860 (1153) 2500
2.80 654 (877) 709 (951) 790 (1059)
3.30, 4.11 884 (1185) 960 (1287) 998 (1338)
4.68, 4.72 861 (1155) 935 (1254) 998 (1338)
MG-6600 DC 2500
5.22 834 (1118) 906 (1215) 998 (1338)
6.05 773 (1037) 839 (1125) 935 (1254)
pages 24 and 25.
60 61
Kilowatts (horsepower) Maximum Speed
Model Ratios
@ 1600 RPM @ 1800 RPM @ 2100 RPM (rpm)
1.15, 1.33, 1.53, 1.73 884 (1185) 960 (1287) 998 (1338)
2.03, 2.32 861 (1155) 935 (1254) 998 (1338)
iMGX-6620 SC 2500
2.44 834 (1118) 906 (1215) 998 (1338)
2.72 773 (1037) 839 (1125) 935 (1254)
1.55, 1.72, 2.09 926 (1242) 1021 (1369) 1132 (1518)
MGX-6620 A 2.28, 2.42 868 (1164) 943 (1265) 1050 (1408) 2500
2.73 769 (1031) 835 (1120) 930 (1247)
1.55 871 (1168) 946 (1269) 1054 (1413)
1.72 843 (1130) 915 (1227) 1020 (1368)
MGX-6620 RV 2.09 800 (1073) 869 (1165) 968 (1298) 2500
2.28, 2.42 777 (1042) 844 (1132) 940 (1261)
2.73 707 (948) 767 (1029) 855 (1147)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6650 SC 928 (1244) 1044 (1400) 1174 (1574)
2.47, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37, 2.47 1054 (1413) 1174 (1574) 1277 (1712)
2300 (1.51-2.03)
MGX-6690 SC 2.93 1034 (1387) 1144 (1534) 1209 (1621)
2500 (2.37-3.21)
3.21 1018 (1365) 1119 (1501) 1194 (1601)
1.51, 1.88, 2.03, 2.37, 2.47, 2.58, 2.81, 2.93 1187 (1592) 1342 (1800) 1566 (2100) 2300 (1.51-2.03)
MGX-6848 SC
3.21 1103 (1479) 1226 (1644) 1404 (1883) 2500 (2.37-3.21)
@ 1200 RPM @ 1600 RPM @ 1800 RPM
1.18, 1.54, 2.06, 2.29, 2.52, 2.92 902 (1210) 1203 (1613) 1353 (1814)
MG-6984 SC 3.25 818 (1097) 1090 (1462) 1227 (1645) 2100
3.43 616 (826) 821 (1101) 924 (1239)
1.48, 1.97, 2.50, 2.79 923 (1238) 1230 (1649) 1384 (1856)
MG-6984 A 2100
2.93 887 (1189) 1182 (1585) 1330 (1784)
1.48, 1.97, 2.50, 2.79 923 (1238) 1230 (1649) 1384 (1856)
MG-6984 RV 2100
2.93 887 (1189) 1182 (1585) 1330 (1784)
MGX-61000 SC 2.22, 2.54, 2.72, 3.03, 3.39 1119 (1500) 1491 (2000) 1678 (2250) 2100
1.16, 1.52, 2.08, 2.47 1315 (1763) 1754 (2352) 1973 (2646)
MG-61242 SC 2100
2.96 1268 (1700) 1691 (2268) 1902 (2551)
1.42, 2.07, 2.44 1315 (1763) 1754 (2352) 1973 (2646)
MG-61242 A 2100
2.93 1263 (1694) 1685 (2260) 1896 (2543)
1.42, 2.07, 2.44 1315 (1763) 1754 (2352) 1973 (2646)
MG-61242 RV 2100
2.93 1263 (1694) 1685 (2260) 1896 (2543)
1.84, 1.98, 2.45, 2.56, 2.86, 2.97 1560 (2092) 2080 (2789) 2340 (3138)
MGX-61500 SC 2100
3.03, 3.41 1333 (1788) 1778 (2384) 2000 (2682)
For Waterjet propulsion only @ 1600 RPM @ 1800 RPM @ 2100 RPM
MGX-61500 SC-HL
1.84, 1.98, 2.18, 2.26, 2.56, 2.97 * 2079 (2788) 2339 (3137) 2729 (3660) 2100
MGX-61500 SC-HR
MGX-62000 SC-HL
1.84, 1.98, 2.18, 2.56, 2.97 * 2248 (3014) 2529 (3391) 2950 (3956) 2100
MGX-62000 SC-HL
*additional ratios will be
made available upon request
pages 24 and 25.
62 63
CONTINUOUS DUTY RATINGS FOR STANDARD &
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
1.45 18 (24) 21 (28) 23 (31)
MG-340 2.00 13 (17) 15 (20) 16 (21) 4500
2.60 9 (12) 11 (15) 12 (16)
1.55 23 (31) 26 (35) 29 (39)
2.00 21 (28) 24 (32) 26 (35)
MG-360 5000
2.45 17 (23) 20 (27) 21 (28)
2.83 14 (19) 16 (22) 17 (23)
1.54, 2.00 35 (47) 41 (55) 45 (60)
MG-5005 A 4500
2.47 26 (35) 30 (40) 33 (44)
1.51 74 (99) 86 (115) 94 (126)
2.09 64 (86) 75 (100) 82 (110)
MG-5012 SC 4500
2.40 58 (77) 67 (90) 74 (99)
2.77 50 (67) 58 (78) 64 (86)
1.50, 2.04 104 (139) 121 (162) 133 (178)
MG-5020 SC 2.50 83 (111) 97 (130) 106 (142) 4000
2.94 72 (96) 84 (112) 92 (123)
1.52, 2.09 59 (79) 69 (93) 75 (101)
MG-5025 A 4500
2.40 52 (70) 61 (82) 67 (90)
1.53, 2.08 105 (141) 123 (165) 135 (181)
MG-5055 A 4000
2.60 60 (82) 70 (95) 77 (103)
1.00, 1.23, 1.53, 1.71, 2.04, 2.45 104 (139) 116 (156) 127 (170)
MG-5050 SC 3300
3.00 93 (125) 108 (145) 121 (162)
MG-5050 A 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 104 (139) 116 (156) 127 (170) 3300
MG-5050 RV 1.12, 1.26, 1.50, 1.80, 2.04, 2.50 104 (139) 116 (156) 127 (170) 3300
1.15, 1.48, 1.77, 2.00, 2.43 123 (165) 142 (190) 155 (208)
MG-5061 SC 3300
3.00 115 (154) 133 (178) 145 (194)
1.13, 1.28, 1.54, 1.75, 2.00 123 (165) 142 (190) 155 (208)
MG-5061 A 3300
2.47 115 (154) 133 (178) 145 (194)
1.13, 1.28, 1.54, 1.75, 2.00 123 (165) 142 (190) 155 (208)
MG-5061 RV 3300
2.47 115 (154) 133 (178) 145 (194)
MG-5062 IV 1.19, 1.53, 1.83, 2.07, 2.51 123 (165) 142 (190) 155 (208) 3300
MGX-5065 SC 1.08, 1.26, 1.47, 1.72, 2.04 216 (290) 250 (335) 272 (365)
3600
MG-5065 SC 2.43 199 (267) 232 (311) 254 (341)
MGX-5065 A 1.08, 1.26, 1.47, 1.72, 2.04 216 (290) 250 (335) 272 (365)
3600
MG-5065 A 2.43 199 (267) 232 (311) 254 (341)
MGX-5075 SC 1.06, 1.22, 1.33, 1.53, 1.77, 2.05
186 (249) 209 (280) 224 (300) 3500
MG-5075 SC 2.53, 2.88
MGX-5075 A 1.06, 1.22, 1.33, 1.53, 1.77, 2.05
186 (249) 209 (280) 224 (300) 3500
MG-5075 A 2.53, 2.88
MGX-5075 IV
1.03, 1.30, 1.49, 1.72, 1.99, 2.46 186 (249) 209 (280) 224 (300) 3500
MG-5075 IV
1.05, 1.22, 1.42, 1.76, 1.96 227 (304) 254 (340) 265 (355)
MG-5085 SC 3200
2.33 205 (275) 231 (310) 243 (326)
1.05, 1.22, 1.47, 1.72, 2.04 227 (304) 254 (340) 265 (355)
MG-5085 A 3200
2.43 205 (275) 231 (310) 243 (326)
Important – See rating definitions, application information, and torsional compatibility notices
on pages 24 and 25.
64 65
Model Ratios
@ 1800 RPM @ 2100 RPM @ 2300 RPM (rpm)
MG-5082 SC 1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53, 2.88 262 (351) 292 (392) 310 (416) 3200
MG-5082 A 1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53, 2.88 262 (351) 292 (392) 310 (416) 3200
MGX-5086 SC 1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53, 2.88 262 (351) 292 (392) 310 (416) 3200
MGX-5086 A 1.06, 1.11, 1.33, 1.53, 1.77, 2.05, 2.28, 2.53, 2.88 262 (351) 292 (392) 310 (416) 3200
1.17, 1.45, 1.71, 2.04, 2.45, 2.95 242 (325) 280 (375) 306 (410)
MG-5091 SC 3000
3.33 205 (275) 239 (320) 261 (350)
3.82, 4.50 242 (325) 280 (375) 306 (410)
MG-5091 DC 3000
5.05 205 (275) 239 (320) 261 (350)
MG-5090 A 1.45, 1.73, 1.96, 2.43 239 (320) 276 (370) 287 (385) 3000
MGX-5095 SC 1.15, 1.27, 1.47, 1.71, 2.00, 2.46
298 (400) 335 (449) 360 (483) 3000
MG-5095 SC 2.95
MGX-5095 A 1.28, 1.52, 1.81, 2.04
298 (400) 335 (449) 360 (483) 3000
MG-5095 A 2.48
MGX-5096A 1.28, 1.52, 1.81, 2.04, 2.48 298 (400) 335 (449) 360 (483) 3000
MGX-5114 SC 0.93, 1.02, 1.12, 1.50, 1.74, 2.04, 2.54 358 (480) 410 (550) 444 (595) 2800 at .93:1
MG-5114 SC 3.00 328 (440) 373 (500) 403 (540) 3000 for others
MGX-5114 SC-HD 1.50, 1.74, 2.04, 2.54 358 (480) 410 (550) 444 (595)
3000
MG-5114 SC-HD 3.00 328 (440) 373 (500) 403 (540)
MGX-5114 DC
3.28, 3.43, 4.17, 4.59, 4.86 347 (465) 403 (540) 421 (565) 3000
MG-5114 DC
MGX-5114 A 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 347 (465) 387 (519) 418 (561)
3000
MG-5114 A 2.50 321 (430) 366 (491) 396 (531)
MGX-5114 RV 1.03, 1.20, 1.48, 1.75, 1.92, 2.04 347 (465) 387 (519) 418 (561)
3000
MG-5114 RV 2.50 321 (430) 366 (491) 396 (531)
MGX-5114 IV 1.05, 1.23, 1.52, 1.80, 1.98 347 (465) 387 (519) 418 (561)
3000
MG-5114 IV 2.57 321 (430) 366 (491) 396 (531)
1.03, 1.20, 1.48, 1.75, 2.04 347 (465) 387 (519) 418 (561)
MGX-5126A 3000
2.50 321 (430) 366 (491) 396 (531)
@ 1600 RPM @ 1800 RPM @ 2100 RPM
MGX-5135 SC 1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 410 (550) 445 (597) 497 (666)
2800
MG-5135 SC 2.90 376 (504) 408 (547) 456 (611)
MGX-5135 A 1.16, 1.25, 1.53, 1.79, 2.00
410 (550) 445 (597) 497 (666) 2800
MG-5135 A 2.52
MGX-5135 RV 1.16, 1.25, 1.53, 1.79, 2.00
410 (550) 445 (597) 497 (666) 2800
MG-5135 RV 2.52
pages 24 and 25.
66 67
Model Ratios
@ 1600 RPM @ 1800 RPM @ 2100 RPM (rpm)
1.00, 1.10, 1.28, 1.48, 1.73, 2.04, 2.57 410 (550) 445 (597) 497 (666)
MGX-5136 SC 2800
2.90 376 (504) 408 (547) 456 (611)
MGX-5136 A 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 410 (550) 445 (597) 497 (666) 2800
MGX-5136 RV 1.16, 1.25, 1.53, 1.79, 2.00, 2.52 410 (550) 445 (597) 497 (666) 2800
MGX-5145 SC 1.03, 1.20, 1.33, 1.48, 1.75, 1.96 510 (684) 552 (740) 596 (799)
2500
MG-5145 SC 2.50 438 (587) 485 (650) 555 (744)
MGX-5145 A 1.26, 1.48, 1.75, 1.96 510 (684) 552 (740) 596 (799)
2500
MG-5145 A 2.50 438 (587) 485 (650) 555 (744)
MGX-5145 RV 1.26, 1.48, 1.75, 1.96 510 (684) 552 (740) 596 (799)
2500
MG-5145 RV 2.50 438 (587) 485 (650) 555 (744)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5146 SC 2500
2.50 481 (645) 537 (720) 615 (825)
1.26, 1.48, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5146 A 2500
2.50 481 (645) 537 (720) 615 (825)
1.26, 1.48, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5146 RV 2500
2.50 481 (645) 537 (720) 615 (825)
1.20, 1.33, 1.48, 1.57, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5147 SC 2500
2.50 481 (645) 537 (720) 615 (825)
1.26, 1.48, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5147 A 2500
2.50 481 (645) 537 (720) 615 (825)
1.26, 1.48, 1.75, 1.96 565 (758) 612 (821) 660 (885)
MGX-5147 RV 2500
2.50 481 (645) 537 (720) 615 (825)
3.07, 3.50, 4.04, 4.52, 5.05 397 (532) 447 (600) 465 (624)
MGX-516 2500
6.00 365 (489) 406 (544) 425 (570)
3.12, 3.54, 4.06, 4.50, 5.03, 5.95 448 (601) 507 (680) 541 (725)
MGX-5170 DC 2500
6.53, 6.95 408 (547) 459 (615) 478 (641)
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92
MGX-5202 SC 540 (724) 600 (805) 678 (909) 2500
3.48
1.17, 1.33, 1.53, 1.76, 2.03, 2.48, 2.92 633 (849) 716 (960) 797 (1069) 2750
MGX-5204 SC
3.48 540 (724) 600 (805) 678 (909) (2500 at 1.17:1)
MGX-5222 DC 4.03, 4.59, 5.04, 6.10, 6.55, 6.96 540 (724) 600 (805) 678 (909) 2500
MGX-5225 DC 4.03, 4.59, 5.04, 5.57, 6.10 633 (849) 716 (960) 735 (986) 2500
3.35, 4.06, 4.42, 4.96, 5.46 882 (1183) 982 (1317) 1000 (1341)
MGX-5321 DC 5.96 861 (1155) 970 (1300) 968 (1298) 2400
6.39 737 (988) 812 (1089) 905 (1214)
pages 24 and 25.
68 69
Model Ratios
@ 1200 RPM @ 1600 RPM @ 1800 RPM (rpm)
1.93, 2.58, 2.90 787 (1055) 1049 (1407) 1180 (1582) 1900
3.26 776 (1041) 1034 (1387) 1163 (1560) 2100
3.91 648 (869) 864 (1159) 972 (1303) 2400
MG-540 4.60 787 (1055) 1049 (1407) 1180 (1582) 1900
(with flexible coupling) 5.17 774 (1038) 1032 (1384) 1161 (1557) 2100
6.18 644 (864) 859 (1152) 969 (1300) 2400
7.00 571 (766) 762 (1022) 895 (1200) 2400
7.47 535 (717) 715 (959) 804 (1078) 2400
4.03, 4.55, 4.96, 5.44 937 (1257) 1249 (1675) 1406 (1885)
MG-5506 2000
6.00 848 (1137) 1130 (1515) 1279 (1715)
2.53, 2.98, 3.51, 4.03, 4.63, 5.04 1230 (1649) 1575 (2112) 1760 (2360)
MGX-5600 5.76 1200 (1609) 1566 (2100) 1737 (2329) 2100
6.04 985 (1321) 1271 (1704) 1410 (1891)
4.20, 6.02 1151 (1543) 1564 (2097) 1760 (2360)
6.56 1038 (1392) 1458 (1955) 1641 (2201)
MGX-5600DR 2100
7.01 964 (1293) 1352 (1813) 1566 (2100)
7.22 845 (1133) 1088 (1459) 1207 (1619)
2.53, 3.00, 3.29
MGN-1814 V 1548 (2076) 2064 (2768) 2322 (3114) 1800
3.62, 4.00
4.43, 4.85
MGN-1816 V 1548 (2076) 2064 (2768) 2322 (3114) 1800
5.33, 5.61
6.00, 6.56, 6.88
MGN-1817 V 1548 (2076) 2064 (2768) 2322 (3114) 1800
7.22, 7.59
MGN-1819 V 8.88 1500 (2012) 2000 (2682) 2250 (3017) 1800
@ 1600 RPM @ 1800 RPM @ 2100 RPM
1.51, 1.73 640 (858) 695 (932) 778 (1043)
2.07 529 (709) 574 (770) 642 (861)
MG-6449 A 2500
2.44 462 (620) 502 (673) 562 (754)
2.95 413 (554) 448 (601) 501 (672)
1.51, 1.73 640 (858) 695 (932) 778 (1043)
2.07 529 (709) 574 (770) 642 (861)
MG-6449 RV 2500
2.44 462 (620) 502 (673) 562 (754)
2.95 413 (554) 448 (601) 501 (672)
pages 24 and 25.
70 71
Model Ratios
@ 1600 RPM @ 1800 RPM @ 2100 RPM (rpm)
2.46, 3.03 710 (952) 771 (1034) 858 (1151)
3.48 670 (898) 729 (978) 811 (1088)
MGX-6598 DC 2500
3.93 611 (819) 664 (890) 739 (991)
4.43 570 (764) 619 (830) 690 (925)
1.07, 1.30, 1.50, 1.66, 1.74 685 (919) 744 (998) 828 (1110)
MGX-6599 SC 1.97, 2.04, 2.19, 2.45 670 (898) 728 (976) 806 (1081) 2500
2.82 575 (771) 624 (837) 696 (933)
1.34, 1.51, 1.74, 2.03, 2.24 706 (947) 767 (1029) 851 (1141)
MGX-6599 A 2.48 668 (896) 728 (976) 804 (1078) 2500
2.80 644 (864) 699 (937) 779 (1045)
1.34, 1.51, 1.74, 2.03, 2.24 706 (947) 767 (1029) 851 (1141)
MGX-6599 RV 2.48 668 (896) 728 (976) 804 (1078) 2500
2.80 644 (864) 699 (937) 779 (1045)
3.30, 4.11 637 (854) 716 (960) 835 (1120)
4.68, 4.72 623 (835) 701 (940) 818 (1097)
MG-6600 DC 2500
5.22 534 (716) 600 (805) 699 (937)
6.05 473 (634) 532 (713) 621 (833)
1.15, 1.33, 1.53, 1.73 827 (1109) 898 (1204) 934 (1252)
2.03 810 (1086) 879 (1179) 934 (1252)
MGX-6620 SC 2.32 805 (1080) 874 (1172) 934 (1252) 2500
2.44 780 (1046) 847 (1136) 934 (1252)
2.72 723 (970) 785 (1053) 875 (1173)
1.55, 1.72, 2.09 875 (1173) 950 (1274) 1059 (1420)
MGX-6620 A 2.28, 2.42 767 (1029) 833 (1117) 928 (1244) 2500
2.73 719 (964) 780 (1046) 869 (1165)
1.55 815 (1093) 885 (1187) 986 (1322)
1.72 788 (1057) 856 (1148) 954 (1279)
MGX-6620 RV 2.09 749 (1004) 813 (1090) 905 (1214) 2500
2.28, 2.42 727 (975) 789 (1058) 879 (1179)
2.73 661 (886) 718 (963) 799 (1071)
1.51, 1.88, 2.03, 2.37 2300 (1.51-2.03)
MGX-6650 SC 911 (1222) 1025 (1375) 1098 (1472)
2.47, 2.93, 3.21 2500 (2.37-3.21)
1.51, 1.88, 2.03, 2.37, 2.47 1017 (1364) 1129 (1514) 1195 (1602)
2300 (1.51-2.03)
MGX-6690 SC 2.93 977 (1310) 1069 (1434) 1130 (1515)
2500 (2.37-3.21)
3.21 943 (1265) 1028 (1379) 1098 (1472)
1.51, 1.88, 2.03, 2.37, 2.47, 2.58, 2.81, 2.93 1111 (1490) 1250 (1676) 1420 (1904) 2300 (1.51-2.03)
MGX-6848 SC
3.21 1074 (1440) 1194 (1601) 1350 (1810) 2500 (2.37-3.21)
@ 1200 RPM @ 1600 RPM @ 1800 RPM
1.18, 1.54, 2.06, 2.29, 2.52, 2.92 884 (1185) 1178 (1580) 1326 (1778)
MG-6984 SC 3.25 800 (1073) 1066 (1430) 1200 (1609) 2100
3.43 602 (807) 802 (1075) 903 (1211)
1.48, 1.97, 2.50, 2.79 905 (1214) 1206 (1617) 1356 (1818)
MG-6984 A 2100
2.93 867 (1163) 1157 (1552) 1301 (1745)
1.16, 1.52 1250 (1676) 1667 (2235) 1875 (2514)
MG-61242 SC 2100
2.08, 2.47, 2.96 1173 (1573) 1512 (2028) 1760 (2360)
1.42, 2.07 1239 (1661) 1651 (2214) 1858 (2492)
MG-61242 A 2.44 1189 (1594) 1585 (2125) 1782 (2390) 2100
2.93 1173 (1573) 1565 (2099) 1760 (2360)
1.84, 1.98, 2.26, 2.39, 2.45
2.56, 2.86, 2.97, 3.03, 3.41
pages 24 and 25.
72 73
DIMENSIONS AND WEIGHTS
FOR TWIN DISC MARINE TRANSMISSIONS
A Vertical Offset B Vertical Offset Downangle D Integral V-Drive

C Remote V-Drive
C A C C
A C A
S S S S
F L R F1 F L R F1 F L R
F L R
Installation F1 (length) L (mounting R (mounting

Assembly Con- SAE A C (offset) S (sump) F (length) Weight
Model Drawing pad) pad)
Drawing fig. Housing (deg.) in (mm) in (mm) in (mm) in (mm) lb (kg)
Series in (mm) in (mm)
MG-340 IT101317501 IT40TD0004 A 5, BW — 2.66 (68) 2.46 (63) 7.17 (182) — — 2.95 (75) 20 (9)
MG-360 IT101319505 IT60TD0004 A 5, BW — 3.10 (79) 3.56 (83) 9.65 (245) — — — 31 (14)
MG-5005 A IT345ATD0001 IT1023041 B 3, 4, 5 8° 4.37 (111) 3.19 (81) 8.82 (224) — — — 55 (25)
MG-5012 SC IT1013079B01 IT93TD0001 A 3, 4, BW — 4.35 (110) 4.92 (125) 10.14 (258) — 6.61 (168) 6.61 (168) 117 (53)
MG-5020 SC IT1013049B01 IT170TD0001 A 3, 4, BW — 5.18 (132) 5.17 (131) 10.53 (268) — 7.60 (193) 7.60 (193) 165 (75)
MG-5025 A IT1013170 IT485ATD0000 B 3, 4, BW 8° 4.96 (126) 3.43 (87) 10.63 (270) — 6.50 (165) 6.50 (165) 79 (36)
MG-5055 A IT101316101 IT880ATD0002 B 3, 4, BW 10° 6.10 (155) 4.25 (108) 10.51 (267) — 7.60 (193) 7.60 (193) 119 (54)
1, 2,
MG-5050 SC PX-12700 PX-13021 A — 5.28 (134) 4.69 (119) 12.78 (325) — 8.13 (207) 5.85 (149) 189 (86)
3, 4
1, 2,
MG-5050 A PX-12730 PX-13019 B 10° 5.52 (140) 3.68 (93) 12.10 (307) — 8.13 (207) 5.85 (149) 176 (80)
3, 4
MG-5050 RV PX-8760 PX-8760 C — 10° 5.52 (140) 3.68 (93) 3.06 (78) 10.13 (257) 8.13 (207) 5.85 (149) 160 (73)
MG-5061 SC PX-11650/-A 1026328 A 1, 2, 3 — 5.66 (144) 4.84 (123) 13.18 (335) — 8.40 (213) 6.15 (156) 215 (98)
MG-5061 A PX-11640/-A 1026225 B 1, 2, 3 7° 5.75 (146) 4.21 (107) 12.53 (318) — 8.40 (213) 6.16 (156) 210 (95)
MG-5061 RV PX-8735 PX-8735 C — 7° 5.75 (146) 4.21 (107) 2.79 (71) 10.53 (267) 8.40 (213) 6.16 (156) 190 (86)
MG-5062 IV PX-11660/-A PX-11660/-A D 1, 2, 3 15° 13.03 (331) 3.97 (101) 4.00 (102) 12.92 (328) 8.40 (213) 6.15 (156) 312 (142)
MGX-5065 SC PX-12410-A 1026371 A 1, 2, 3 — 6.00 (152) 5.22 (133) 13.30 (338) — 10.00 (254) 6.50 (165) 244 (111)
MGX-5065 A PX-12370-A 1026215 B 1, 2, 3 7° 6.69 (170) 4.84 (123) 12.97 (329) — 10.00 (254) 6.50 (165) 244 (111)
MG-5065 SC PX-11480-A 1026372-A A 1, 2, 3 — 6.00 (152) 5.22 (133) 13.30 (338) — 10.00 (254) 6.50 (165) 244 (111)
MG-5065 A PX-11165-B 1026552 B 1, 2, 3 7° 6.69 (170) 4.84 (123) 12.97 (329) — 10.00 (254) 6.50 (165) 244 (111)
MGX-5075 SC PX-12620 PX-13174 A 1, 2, 3 — 0.59 (15) 7.00 (178) 14.11 (358) — 10.00 (254) 10.00 (254) 268 (122)
MGX-5075 A PX-12610 PX-12610 B 1, 2, 3 7° 1.91 (48) 7.00 (178) 13.80 (350) — 10.00 (254) 10.00 (254) 268 (122)
MGX-5075 IV PX-12630 1026838 D 1, 2, 3 15° 14.70 (373) 3.93 (100) 2.81 (71) 13.94 (354) 10.00 (254) 10.00 (254) 330 (150)
PX-11876 &
MG-5075 SC 1026311 A 1, 2, 3 — 0.59 (15) 7.00 (178) 14.11 (358) — 10.00 (254) 10.00 (254) 268 (122)
PX-11876
MG-5075 SC PX-10680/-A PX-10680/-A A 1, 2, 3 — 0.59 (15) 7.00 (178) 14.11 (358) — 10.00 (254) 10.00 (254) 268 (122)
MG-5075 A PX-10700/-A 1026876 B 1, 2, 3 7° 1.91 (48) 7.00 (178) 13.80 (350) — 10.00 (254) 10.00 (254) 268 (122)
MG-5075 IV PX-11530A PX-13054 D 1, 2, 3 15° 14.70 (373) 3.93 (100) 2.81 (71) 13.94 (354) 10.00 (254) 10.00 (254) 330 (150)
MG-5082 SC PX-11250-A PX-11250-A A 1, 2 — 0.59 (15) 7.00 (178) 16.24 (413) — 10.00 (254) 10.00 (254) 298 (135)
MG-5082 A PX-11040-B PX-11040-B B 1, 2 7° 2.12 (54) 7.00 (178) 15.97 (405) — 10.00 (254) 10.00 (254) 298 (135)
MG-5085 SC PX-9260-B/-C PX-9260-B/-C A 1, 2,3 — 6.00 (152) 5.25 (133) 14.67 (373) — 10.00 (254) 6.50 (165) 265 (120)
MG-5085 A PX-9360-B/-C PX-13370 B 1, 2, 3 7° 6.69 (170) 4.84 (123) 14.69 (373) — 10.00 (254) 6.50 (165) 270 (123)
MGX-5086 SC PX-12600 PX-12600 A 1, 2 — 0.59 (15) 7.00 (178) 16.24 (413) — 10.00 (254) 10.00 (254) 298 (135)
MGX-5086 A PX-12290 PX-13064 B 1, 2 7° 2.12 (54) 7.00 (178) 15.97 (405) — 10.00 (254) 10.00 (254) 298 (135)
MG-5091 SC PX-10016 1026295 A 1, 2 — 6.82 (173) 6.22 (158) 16.59 (421) — 10.25 (260) 6.94 (176) 485 (220)
1002155/ 1026877/
MG-5091 DC A 1, 2 — 9.49 (241) 9.60 (244) 18.09 (459) — 11.12 (282) 11.12 (282) 655 (297)
PX-12636 (FS) PX-12636 (FS)
MG-5090 A PX-10015 PX-13290 B 1, 2 7° 7.30 (185) 5.05 (128) 17.07 (434) — 10.25 (260) 7.00 (178) 475 (215)
MGX-5095 SC PX-12480 PX-13023 A 1, 2 — 7.48 (190) 6.14 (156) 17.00 (432) — 10.43 (265) 10.43 (265) 419 (190)
MGX-5095 A PX-12360 PX-13022 B 1, 2 7 7.43 (189) 5.54 (141) 17.00 (432) — 10.43 (265) 10.43 (265) 407 (185)
MG-5095 SC PX-11535 PX-13215 A 1, 2 — 7.48 (190) 6.14 (156) 17.00 (432) — 10.43 (265) 10.43 (265) 419 (190)
MG-5095 A PX-11495 PX-11495 B 1, 2 7 7.43 (189) 5.54 (141) 17.00 (432) — 10.43 (265) 10.43 (265) 407 (185)
Dimensions may vary with housing adapter or output flange. Use certified drawings for installation.
Dry weights are approximate and vary by input and ratio.
74 Specifications are subject to change without notice. 75

C Remote V-Drive
C A C C
A C A
S S S S
F L R
Installation L (mounting R (mounting

Assembly Con- SAE A C (offset) S (sump) F (length) F1 (length) Weight
MGX-5096A PX12680A PX12820 B 1, 2 7 7.51 (191) 5.45 (139) 19.76 (502) — 10.43 (265) 10.43 (265) 443 (201)
MG-5096A PX13225 PX13226 B 1, 2 7 7.51 (191) 5.45 (139) 19.76 (502) — 10.43 (265) 10.43 (265) 443 (201)
MGX-5114 SC PX-12490 PX-13025 A 1 — 7.47 (190) 6.33 (161) 19.00 (483) — 11.00 (279) 7.50 (191) 447 (203)
MGX-5114 SC-HD PX-12860 PX-13252 A 1 — 7.47 (190) 6.33 (161) 19.00 (483) — 11.00 (279) 11.00 (279) 595 (270)
MGX-5114 DC PX-12170 PX-13144 A 1 — 10.90 (277) 9.85 (250) 19.03 (483) — 11.25 (286) 11.25 (286) 793 (360)
MGX-5114 A 1024390 PX-13024 B 1, 2 7 8.00 (203) 5.30 (135) 18.80 (479) — 11.00 (279) 8.00 (203) 455 (206)
MGX-5114 RV PX-13270 PX-13365 C — 7 8.00 (203) 5.25 (133) 2.12 (54) 17.69 (449) 11.00 (279) 8.00 (203) 435 (198)
MGX-5114 IV PX-12510 1025008 D 1, 2 14 16.26 (413) 5.75 (146) 2.43 (62) 19.26 (489) 7.50 (191) 11.50 (292) 595 (270)
MG-5114 SC PX-13150 PX-13253 A 1 — 7.47 (190) 6.33 (161) 19.00 (483) — 11.00 (279) 7.50 (191) 447 (203)
MG-5114 SC-HD PX-13155 PX-13251 A 1, Ind. — 7.47 (190) 6.33 (161) 19.00 (483) — 11.00 (279) 11.00 (279) 595 (270)
PX-10250-A/ PX-10250-A/
MG-5114 DC A 1, Ind. — 10.90 (277) 9.85 (250) 19.03 (483) — 11.25 (286) 11.25 (286) 800 (364)
PX-12195 (FS) PX-12195 (FS)
MG-5114 A 1024125 1026762 B 1, 2 7 8.00 (203) 5.30 (133) 18.80 (479) — 11.00 (279) 8.00 (203) 455 (206)
MG-5114 RV PX-13280 PX-13366 C — 7 8.00 (203) 5.25 (133) 2.12 (54) 17.69 (449) 11.00 (279) 8.00 (203) 435 (198)
MG-5114 IV PX-11920 PX-11920 D 1, 2 14 16.26 (413) 5.75 (146) 2.43 (62) 19.26 (489) 7.50 (191) 11.50 (292) 595 (270)
MGX-5126 A PX12870 1026597 B 1 7 8.11 (206) 5.13 (130) 21.53 (547) — 11.00 (279) 8.00 (203) 489 (222)
MG-5126 A PX13235 PX13236 B 1 7 8.11 (206) 5.13 (130) 21.53 (547) — 11.00 (279) 8.00 (203) 489 (222)
PX-12450/
MGX-5135 SC 1026089 A 1, 0 — 7.87 (200) 7.48 (190) 21.06 (535) — 12.01 (305) 12.01 (305) 625 (284)
PX-12590 (FS)
MGX-5135 A PX-12380 1025702 B 1, 0 10 9.09 (231) 6.28 (160) 20.48 (520) — 12.01 (305) 12.01 (305) 617 (280)
MGX-5135 RV PX-12520 PX-13143 C — 10 9.09 (231) 6.28 (160) 4.55 (116) 22.91 (582) 12.01 (305) 12.01 (305) 568 (258)
MG-5135 SC PX-11590 PX-11590 A 1, 0 — 7.87 (200) 7.48 (190) 21.06 (535) — 12.01 (305) 12.01 (305) 625 (284)
MG-5135 A PX-11380 PX-11380 B 1, 0 10 9.09 (231) 6.28 (160) 20.48 (520) — 12.01 (305) 12.01 (305) 617 (280)
MG-5135 RV PX-11945 PX-11945 C — 10 9.09 (231) 6.28 (160) 4.55 (116) 22.91 (582) 12.01 (305) 12.01 (305) 568 (258)
MGX-5136SC 1027445 1027608 A 1, 0 — 7.87 (200) 7.48 (190) 22.52 (572) — 12.01 (305) 12.01 (305) 659 (299)
MGX-5136A 1025600 1027607 B 1, 0 10 9.12 (232) 6.26 (159) 21.93 (557) — 12.01 (305) 12.01 (305) 650 (295)
MGX-5136RV 1027556 1027609 C — 10 9.12 (232) 6.26 (159) 4.46 (113) 18.02 (458) 12.01 (305) 12.01 (305) 608 (276)
MG-5136SC 1027560 1027762 A 1, 0 — 7.87 (200) 7.48 (190) 22.52 (572) — 12.01 (305) 12.01 (305) 659 (299)
MG-5136A 1027557 1027761 B 1, 0 10 9.12 (232) 6.26 (159) 21.93 (557) — 12.01 (305) 12.01 (305) 650 (295)
MG-5136RV 1027561 1027763 C — 10 9.12 (232) 6.26 (159) 4.46 (113) 18.02 (458) 12.01 (305) 12.01 (305) 608 (276)
MGX-5145 SC PX-12460 1026327 A 1, 0 — 8.12 (206) 7.04 (179) 21.05 (535) — 12.01 (305) 12.01 (305) 716 (325)
MGX-5145 A PX-12420 1025920 B 1, 0 10 10.40 (264) 6.13 (156) 20.33 (516) — 12.01 (305) 12.01 (305) 734 (333)
MGX-5145 RV PX-12530 PX-13299 C — 10 10.40 (264) 6.13 (156) 5.77 (147) 18.06 (459) 12.01 (305) 12.01 (305) 650 (295)
MG-5145 SC PX-10885 PX-13145 A 1, 0 — 8.12 (206) 7.04 (179) 21.05 (535) — 12.01 (305) 12.01 (305) 716 (325)
MG-5145 A PX-10830 PX-10830 B 1, 0 10 10.40 (264) 6.13 (156) 20.33 (516) — 12.01 (305) 12.01 (305) 734 (333)
MG-5145 RV PX-10880 PX-10880 C — 10 10.40 (264) 6.13 (156) 5.77 (147) 18.06 (459) 12.01 (305) 12.01 (305) 650 (295)
MGX-5146SC 1027661 1027662 A 1, 0 — 8.12 (206) 7.04 (179) 22.52 (572) — 12.01 (305) 12.01 (305) 760 (345)
MGX-5146A 1027596 1027597 B 1, 0 10 10.40 (264) 6.13 (156) 21.85 (555) — 12.01 (305) 12.01 (305) 778 (353)
MGX-5146RV 1027740 1027741 C — 10 10.40 (264) 6.13 (156) 5.68 (144) 17.96 (456) 12.01 (305) 12.01 (305) 694 (315)
MG-5146SC 1027904 1027905 A 1, 0 — 8.12 (206) 7.04 (179) 22.52 (572) — 12.01 (305) 12.01 (305) 760 (345)
MG-5146A 1027902 1027903 B 1, 0 10 10.40 (264) 6.13 (156) 21.85 (555) — 12.01 (305) 12.01 (305) 778 (353)
MG-5146RV 1027906 1027907 C — 10 10.40 (264) 6.13 (156) 5.68 (144) 17.96 (456) 12.01 (305) 12.01 (305) 694 (315)

C Remote V-Drive
C A C C
A C A
S S S S
F L R
Installation Con- F1 (length) L (mounting R (mounting

Assembly SAE A C (offset) S (sump) F (length) Weight
MGX-5147 SC PX-12470-A 1026327 A 1, 0 — 8.12 (206) 7.04 (179) 21.05 (535) — 12.01 (305) 12.01 (305) 716 (325)
MGX-5147 A PX-12430-A 1025920 B 1, 0 10 10.40 (264) 6.13 (156) 20.33 (516) — 12.01 (305) 12.01 (305) 734 (333)
MGX-5147 RV PX-12540-A PX-13299 C — 10 10.40 (264) 6.13 (156) 5.77 (147) 18.06 (459) 12.01 (305) 12.01 (305) 650 (295)
1, 0 (14" 13.29
MGX-516 1023380 1026197 A — 12.77 (324) 20.59 (523) — 14.00 (356) 14.00 (356) 1580 (717)
only) (338)
MGX-5170 DC 1023382 1026199 A 1, 0 — 15.15 (385) 14.23 (361) 22.55 (573) — 15.00 (381) 15.00 (381) 1670 (759)
MGX-5202 SC 1026316 1026322 A 1, 0, Ind. — 9.75 (248) 8.75 (222) 23.45 (595) — 14.75 (375) 10.50 (267) 1275 (580)
MGX-5204 SC 1026193 1026242 A 1, 0, Ind. — 9.75 (248) 8.75 (222) 23.43 (595) — 14.75 (375) 10.50 (267) 900 (409)
MGX-5222 DC 1022822-A 1025541 A 1, 0, Ind. — 15.75 (400) 15.13 (384) 25.08 (637) — 16.00 (406) 16.00 (406) 2304 (1046)
MGX-5225 DC 1022825-A 1025541 A 1, 0, Ind. — 15.75 (400) 15.13 (384) 25.08 (637) — 16.00 (406) 16.00 (406) 2304 (1046)
MGX-5321 DC 1022203-B 1026064 A 0, 00, Ind. — 17.32 (440) 16.77 (426) 29.83 (758) — 17.32 (440) 17.32 (440) 3864 (1754)
MG-540 X-9882-C X-9882-C A 0, 00, Ind. — 8.08 (205) 13.45 (342) 36.47 (926) — 16.00 (406) 16.00 (406) 4450 (2019)
MG-5506 00D005604 00D005604 A 0, 00, Ind. — 19.29 (490) 19.29 (490) 39.17 (995) — 20.08 (510) 20.08 (510) 4846 (2200)
MGX-5600 1027251 1027247 A 0, 00, Ind. — 21.65 (550) 21.26 (540) 41.02 (1042) — 20.67 (525) 20.67 (525) 6890 (3132)
MGX-5600 DR 1028410 1028499 A Ind. — 8.85 (225) 21.26 (540) 50.63 (1286) — 20.67 (525) 20.67 (525) 7000 (3175)
MGN-1814 V PPD007097 PPD007097 A Ind. — 16.73 (425) 19.69 (500) 55.12 (1400) — 27.56 (700) 23.62 (600) 6608 (3000)
MGN-1816 V PPD007098 PPD007098 A Ind. — 21.26 (540) 22.83 (580) 55.12 (1400) — 29.53 (750) 29.53 (750) 8370 (3800)
MGN-1817 V 00D007099-B 00D007099-B A Ind. — 26.38 (670) 27.56 (700) 55.12 (1400) — 31.50 (800) 31.50 (800) 9912 (4500)
MGN-1819 V PLN005679-B PLN005679-B A Ind. — 30.71 (780) 33.46 (850) 55.12 (1400) — 37.40 (950) 37.40 (950) TBA (TBA)
MG-6449 A 5-50006-B 7-38504-A B 1, 0, Ind. 10 10.83 (275) 4.92 (125) 20.83 (529) — 12.01 (305) 12.01 (305) 757 (344)
MG-6449 RV 7-37431-A 7-37431-A C — 10 10.88 (276) 6.44 (164) 6.32 (161) 20.32 (516) 12.01 (305) 12.01 (305) 782 (355)
MGX-6598 DC 7-40985 see 1025433 A 1, 0, Ind. — 12.20 (310) 10.83 (275) 23.72 (603) — 14.17 (360) 14.17 (360) 1278 (580)
MGX-6599 SC 7-40979 7-40989 A 1, 0, Ind. — 8.66 (220) 9.29 (236) 23.31 (592) — 13.39 (340) 13.39 (340) 1084 (492)
MGX-6599 A 7-40981 7-40987 B 1, 0, Ind. 10 11.70 (297) 6.25 (159) 22.60 (574) — 13.39 (340) 13.39 (340) 1075 (488)
MGX-6599 RV 7-40983 7-40988 C — 10 11.70 (297) 6.25 (159) 6.06 (154) 20.63 (524) 13.39 (340) 13.39 (340) 1031 (468)
MG-6600 DC 7-37941 7-36712-A A 0, Ind. — 14.17 (360) 14.96 (380) 30.87 (784) — 14.76 (375) 14.76 (375) 1747(794)
MGX-6620 SC 7-40980 see 1025433 A 0, Ind. — 9.25 (235) 9.25 (235) 27.48 (698) — 13.39 (340) 13.39 (340) 1267 (575)
MGX-6620 A 7-40982 see 1025433 B 0, Ind. 10 12.44 (316) 7.25 (184) 25.70 (653) — 13.39 (340) 13.39 (340) 1278 (580)
MGX-6620 RV 7-40984 see 1025433 C — 10 12.44 (316) 7.25 (184) 5.06 (129) 23.74 (603) 13.39 (340) 13.39 (340) 1123 (510)
MGX-6650 SC 1002046 1028862 A 0, 00, Ind. — 12.21 (310) 11.81 (300) 30.13 (765) — 17.32 (440) 17.32 (440) 2205 (1001)
MGX-6690 SC 1020674 1025142 A 0, 00, Ind. — 12.21 (310) 11.81 (300) 30.13 (765) — 17.32 (440) 17.32 (440) 2205 (1001)
MGX-6848 SC 1020675 1025142 A 0, 00, Ind. — 12.21 (310) 11.81 (300) 30.13 (765) — 17.32 (440) 17.32 (440) 2205 (1001)
MG-6984 SC 7-37482 7-38495 A 0, 00, Ind. — 12.21 (310) 11.30 (287) 27.20 (691) — 17.52 (445) 17.52 (445) 2628 (1192)
MG-6984 A 7-37950-A 7-37028 B 0, 00, Ind. 10 15.04 (382) 8.50 (216) 26.93 (684) — 17.52 (445) 17.52 (445) 1991 (905)
MG-6984 RV 7-37042 7-37042 C — 10 15.04 (382) 8.50 (216) 11.82 (300) 30.86 (784) 17.52 (445) 17.52 (445) 2002 (910)
MGX-61000 SC 1024420 1024771 A 00, Ind. — 14.96 (380) 14.17 (360) 39.08 (993) — 19.29 (490) 19.29 (490) 3920 (1780)
MG-61242 SC 7-37018 see 1025433 A Ind. — 13.39 (340) 12.17 (309) 29.80 (757) — 19.69 (500) 19.69 (500) 2310 (1050)
MG-61242 A 7-37047 7-37046 B Ind. 10 17.52 (445) 9.49 (241) 30.35 (771) — 19.69 (500) 19.69 (500) 2431 (1105)
MG-61242 RV 7-37050 7-37049 C — 10 17.52 (445) 9.49 (241) 11.34 (288) 32.56 (827) 19.69 (500) 19.69 (500) 2475 (1125)
A Vertical Offset E Horizontal Offset Left F Horizontal Offset Right
C C
C
S S
S
F L R F R L
F L R
Assembly Installation F1 L (mounting R (mounting

Drawing Con- SAE A C (offset) S (sump) F (length) Weight
Model (length) pad) pad)
Drawing fig. Housing (deg.) in (mm) in (mm) in (mm) lb (kg)
Series in (mm) in (mm) in (mm)
MGX-61500 SC 1024500 1025454 A Ind. — 18.11 (460) 15.63 (397) 40.63 (1032) — 18.23 (463) 18.23 (463) 4230 (1920)
MGX-61500 SC-HL 1023610 1025259 E Ind. — 18.11 (460) 24.36 (619) 40.04 (1017) — 15.63 (397) 29.33 (745) 4840 (2195)
MGX-61500 SC-HR 1023611 1025260 F Ind. — 18.11 (460) 24.36 (619) 40.04 (1017) — 29.33 (745) 15.63 (397) 4840 (2195)
MGX-62000SC-HL 1026779 1025259 E Ind. — 18.11 (460) 24.36 (619) 40.04 (10.17) — 15.63 (397) 29.33 (745) 4840 (2195)
MGX-62000SC-HR 1026776 1025260 F Ind. — 18.11 (460) 24.36 (619) 40.04 (10.17) — 29.33 (745) 15.63 (397) 4840 (2195)
Specifications are subject to change without notice.
80 81
NOTES NOTES
82 83
TWIN DISC, INCORPORATED
1328 RACINE STREET
RACINE, WISCONSIN 53403 USA
TELEPHONE: +1 (262) 638-4000
TELEFAX: +1 (262) 638-4480
EMAIL: SALES@TWINDISC.COM
TWIN DISC INTERNATIONAL, S.A. TWIN DISC (FAR EAST) PTE. LTD.
Chaussé de Namur, 54 10, Fifth Lok Yang Road
B-1400 Nivelles Jurong
Belgium Singapore 629761
Telephone: +32 (0) 67 887 211 Telephone: +65 6267 0800
Telefax: +32 (0) 67 887 333 Telefax: +65 6264 2080
E-mail: tdbelgium@twindisc.com E-mail: enquiry@twindisc.com.sg
TWIN DISC SRL TWIN DISC POWER TRANSMISSION CO. LTD.

Via S. Cristoforo 131 Shanghai Representative Office
40017 S. Matteo Della Decima (BO) Room 2308, No. 88 South Zun Yi Road
Italy Chang Ning District
Telephone: +39 051 6819711 China 200336
Telefax: +39 051 6824234 Telephone: +86 (21) 6427 3212
6825814 +86 (21) 6209 7626
E-mail: info.technodrive@twindisc.com Telefax: +86 (21) 6209 7629
E-mail: enquiry@twindisc.com.cn
TWIN DISC SRL
Via E.e P. Salani 1 TWIN DISC POWER TRANSMISSION PRIVATE, LTD.
50050 Limite Sull’Arno (FI) EL Heights, 1st Floor
Italy 3 CMM Street
Phone: +39 0571 979111 Nungambakkam, Chennai, 600034
Telefax: +39 0571 979143 India
E-Mail: info.bcs@twindisc.com Telephone: +91 (44) 2821 3099
TWIN DISC, INC. ROLLA SP PROPELLERS SA

Latin America Office Via Roncaglia 6
3505 Lake Lynda Drive, Suite 200 P.O. Box 109
Orlando, FL 32817 Novazzano, 6883
United States of America Switzerland
Telephone: +1-407-574-3357 Phone: + 41 (0) 91 695 2000
Cell: +1-954-663-3244 Telefax: + 41 (0) 91 695 2001
E-mail: eberhardt.erwin@twindisc.com E-mail: info@rolla-propellers.ch
TWIN DISC (PACIFIC) PTY. LTD. TWIN DISC JAPAN

40 Telford Street Twin Disc Nico Co. Ltd.
Virginia QLD 4014 405-3, Yoshinocho 1-chome, Kita-ku
Australia Saitama-shi, Saitama-ken, 331-0811
Telephone: +61 (7) 3265-1200 Japan
Cell: +61 (7) 3865-1371 Phone: +81 (48) 652-8069
E-mail: twindisc.brisbane@twindisc.com.au Telefax: +81 (48) 665-6695
E-Mail: info@tdnico.com
84
T W I N DI S C, I N CORP ORAT E D
R AC I NE , WI S CON S I N , U.S .A .
UNITED STATES OF AMERICA • AUSTRALIA • BELGIUM
CANADA • CHINA • INDIA • ITALY • SINGAPORE • SWITZERLAND
Bulletin 319-B-MPG Nov-14 Printed in the USA
WWW.T WINDISC.COM

Twin Disc Marine Product Guide

Uploaded by

Copyright:

Available Formats

Twin Disc Marine Product Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Twin Disc Marine Product Guide

Uploaded by

Copyright:

Available Formats

What does the document discuss?

What does the document discuss?

What are some of the product lines mentioned?

What are some of the product lines mentioned?

MA RINE P RODUC T GUI D E

Service Classification Definitions . . . . . . . . . . . . . . . . . . . . . . . 25

Important Application Information . . . . . . . . . . . . . . . . . . . . . 26

Standard and QuickShift®

Twin Disc Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 - 86

FEATURES & BENEFITS

GASOLINE @ 5200 rpm To 550 To 990 To 1485 —

FEATURES & BENEFITS

TWIN DISC ELECTRIC THRUSTERS • Complete range for applications up to 130’

Nominal Thrust Tunnel I.D. Nominal Power Weight

These values are intended to be indicative. The performance of each

• Wide variety of possible configurations

• Better and greater visibility

C • Better engine performance

Captain is responsible for the safe operation of the vessel.

Twin Disc Twin Disc

• System make up: • Meets DP2 requirements

1 The Twin Disc EC300DP control system is suitable for DP0,

Typical vessels include mid-water trawlers, crew/supply boats,

A Vertical Offset B Vertical Offset Downangle D Integral V-Drive

Installation F1 (length) L (mounting R (mounting

A Vertical Offset B Vertical Offset Downangle D Integral V-Drive

Installation L (mounting R (mounting

A Vertical Offset B Vertical Offset Downangle D Integral V-Drive

Installation Con- F1 (length) L (mounting R (mounting

A Vertical Offset E Horizontal Offset Left F Horizontal Offset Right

Assembly Installation F1 L (mounting R (mounting

TWIN DISC SRL TWIN DISC POWER TRANSMISSION CO. LTD.

TWIN DISC, INC. ROLLA SP PROPELLERS SA

TWIN DISC (PACIFIC) PTY. LTD. TWIN DISC JAPAN

Bulletin 319-B-MPG Nov-14 Printed in the USA

You might also like

1 The Twin Disc EC300DP control system is suitable for DP0,