Software Engineering

Software engineering.
Software engineering
Software engineering is an engineering branch associated with
development of software product using well-defined scientific principles,
methods and procedures. The outcome of software engineering is an
efficient and reliable software product.
Software project management has wider scope than software engineering

process as it involves communication, pre and post delivery support etc.
Software is more than just a program code. A program is an executable

code, which serves some computational purpose. Software is considered
to be collection of executable programming code, associated libraries and
documentations. Software, when made for a specific requirement is
called software product.
Engineering on the other hand, is all about developing products, using

well-defined, scientific principles and methods.
Software engineering is an engineering branch associated with

development of software product using well-defined scientific principles,
methods and procedures. The outcome of software engineering is an
efficient and reliable software product.
Definitions
1|co p y -p as te fr om tu tori alp oin ts. com
IEEE defines software engineering as:
(1) The application of a systematic,disciplined,quantifiable approach to the

development,operation and maintenance of software; that is, the
application of engineering to software.
(2) The study of approaches as in the above statement.
Fritz Bauer, a German computer scientist, defines software engineering

as:
Software engineering is the establishment and use of sound engineering

principles in order to obtain economically software that is reliable and work
efficiently on real machines.
Software Evolution
The process of developing a software product using software engineering
principles and methods is referred to as software evolution. This
includes the initial development of software and its maintenance and
updates, till desired software product is developed, which satisfies the
expected requirements.
Evolution starts from the requirement gathering process. After which

developers create a prototype of the intended software and show it to the
users to get their feedback at the early stage of software product
development. The users suggest changes, on which several consecutive
updates and maintenance keep on changing too. This process changes to
the original software, till the desired software is accomplished.
Even after the user has desired software in hand, the advancing
technology and the changing requirements force the software product to
change accordingly. Re-creating software from scratch and to go one-on-

one with requirement is not feasible. The only feasible and economical
solution is to update the existing software so that it matches the latest
requirements.
Software Evolution Laws

Lehman has given laws for software evolution. He divided the software
into three different categories:
 S-type (static-type) - This is a software, which works strictly according to

defined specifications and solutions. The solution and the method to achieve
it, both are immediately understood before coding. The s-type software is
least subjected to changes hence this is the simplest of all. For example,
calculator program for mathematical computation.
 P-type (practical-type) - This is a software with a collection

of procedures. This is defined by exactly what procedures can do. In this
software, the specifications can be described but the solution is not obvious
instantly. For example, gaming software.
 E-type (embedded-type) - This software works closely as the requirement

of real-world environment. This software has a high degree of evolution as
there are various changes in laws, taxes etc. in the real world situations. For
example, Online trading software.
E-Type software evolution

Lehman has given eight laws for E-Type software evolution -
 Continuing change - An E-type software system must continue to adapt to

the real world changes, else it becomes progressively less useful.
 Increasing complexity - As an E-type software system evolves, its

complexity tends to increase unless work is done to maintain or reduce it.
 Conservation of familiarity - The familiarity with the software or the

knowledge about how it was developed, why was it developed in that
particular manner etc. must be retained at any cost, to implement the
changes in the system.
 Continuing growth- In order for an E-type system intended to resolve some

business problem, its size of implementing the changes grows according to
the lifestyle changes of the business.
 Reducing quality - An E-type software system declines in quality unless

rigorously maintained and adapted to a changing operational environment.

 Feedback systems- The E-type software systems constitute multi-loop,

multi-level feedback systems and must be treated as such to be successfully
modified or improved.
 Self-regulation - E-type system evolution processes are self-regulating with

the distribution of product and process measures close to normal.
 Organizational stability - The average effective global activity rate in an

evolving E-type system is invariant over the lifetime of the product.
Software Paradigms
Software paradigms refer to the methods and steps, which are taken while
designing the software. There are many methods proposed and are in work
today, but we need to see where in the software engineering these
paradigms stand. These can be combined into various categories, though
each of them is contained in one another:
Programming paradigm is a subset of Software design paradigm which is

further a subset of Software development paradigm.
Software Development Paradigm

This Paradigm is known as software engineering paradigms where all the
engineering concepts pertaining to the development of software are
applied. It includes various researches and requirement gathering which
helps the software product to build. It consists of –
 Requirement gathering

 Software design
 Programming
Software Design Paradigm

This paradigm is a part of Software Development and includes –
 Design
 Maintenance
 Programming
Programming Paradigm
This paradigm is related closely to programming aspect of software
development. This includes –
 Coding
 Testing
 Integration
Need of Software Engineering

The need of software engineering arises because of higher rate of change
in user requirements and environment on which the software is working.
 Large software - It is easier to build a wall than to a house or building,

likewise, as the size of software become large engineering has to step to give
it a scientific process.
 Scalability- If the software process were not based on scientific and

engineering concepts, it would be easier to re-create new software than to
scale an existing one.
 Cost- As hardware industry has shown its skills and huge manufacturing has
lower down he price of computer and electronic hardware. But the cost of
software remains high if proper process is not adapted.
 Dynamic Nature- The always growing and adapting nature of software

hugely depends upon the environment in which user works. If the nature of
software is always changing, new enhancements need to be done in the
existing one. This is where software engineering plays a good role.
 Quality Management- Better process of software development provides

better and quality software product.
Characteristics of good software

A software product can be judged by what it offers and how well it can be
used. This software must satisfy on the following grounds:
 Operational
 Transitional
 Maintenance
Well-engineered and crafted software is expected to have the following

characteristics:
Operational
This tells us how well software works in operations. It can be measured
on:
 Budget
 Usability
 Efficiency
 Correctness
 Functionality
 Dependability
 Security
 Safety
Transitional
This aspect is important when the software is moved from one platform to
another:
 Portability
 Interoperability
 Reusability
 Adaptability
Maintenance
This aspect briefs about how well a software has the capabilities to
maintain itself in the ever-changing environment:
 Modularity
 Maintainability
 Flexibility

 Scalability
In short, Software engineering is a branch of computer science, which uses

well-defined engineering concepts required to produce efficient, durable,
scalable, in-budget and on-time software products.
Software Development Life Cycle, SDLC for short, is a well-defined,

structured sequence of stages in software engineering to develop the
intended software product.
SDLC Activities
SDLC provides a series of steps to be followed to design and develop a
software product efficiently. SDLC framework includes the following steps:
Communication
This is the first step where the user initiates the request for a desired
software product. He contacts the service provider and tries to negotiate
the terms. He submits his request to the service providing organization in
writing.
Requirement Gathering

This step onwards the software development team works to carry on the
project. The team holds discussions with various stakeholders from
problem domain and tries to bring out as much information as possible on
their requirements. The requirements are contemplated and segregated
into user requirements, system requirements and functional requirements.
The requirements are collected using a number of practices as given -
 studying the existing or obsolete system and software,
 conducting interviews of users and developers,
 referring to the database or
 collecting answers from the questionnaires.
Feasibility Study
After requirement gathering, the team comes up with a rough plan of
software process. At this step the team analyzes if a software can be made
to fulfill all requirements of the user and if there is any possibility of
software being no more useful. It is found out, if the project is financially,
practically and technologically feasible for the organization to take up.
There are many algorithms available, which help the developers to
conclude the feasibility of a software project.
System Analysis
At this step the developers decide a roadmap of their plan and try to bring
up the best software model suitable for the project. System analysis
includes Understanding of software product limitations, learning system
related problems or changes to be done in existing systems beforehand,
identifying and addressing the impact of project on organization and
personnel etc. The project team analyzes the scope of the project and
plans the schedule and resources accordingly.
Software Design
Next step is to bring down whole knowledge of requirements and analysis
on the desk and design the software product. The inputs from users and
information gathered in requirement gathering phase are the inputs of this
step. The output of this step comes in the form of two designs; logical
design and physical design. Engineers produce meta-data and data
dictionaries, logical diagrams, data-flow diagrams and in some cases
pseudo codes.
Coding
This step is also known as programming phase. The implementation of

software design starts in terms of writing program code in the suitable
programming language and developing error-free executable programs
efficiently.
Testing
An estimate says that 50% of whole software development process should
be tested. Errors may ruin the software from critical level to its own
removal. Software testing is done while coding by the developers and
thorough testing is conducted by testing experts at various levels of code
such as module testing, program testing, product testing, in-house testing
and testing the product at user’s end. Early discovery of errors and their
remedy is the key to reliable software.
Integration
Software may need to be integrated with the libraries, databases and other
program(s). This stage of SDLC is involved in the integration of software
with outer world entities.
Implementation
This means installing the software on user machines. At times, software
needs post-installation configurations at user end. Software is tested for
portability and adaptability and integration related issues are solved during
implementation.
Operation and Maintenance

This phase confirms the software operation in terms of more efficiency and
less errors. If required, the users are trained on, or aided with the
documentation on how to operate the software and how to keep the
software operational. The software is maintained timely by updating the
code according to the changes taking place in user end environment or
technology. This phase may face challenges from hidden bugs and real-
world unidentified problems.
Disposition
As time elapses, the software may decline on the performance front. It
may go completely obsolete or may need intense upgradation. Hence a
pressing need to eliminate a major portion of the system arises. This phase
includes archiving data and required software components, closing down

the system, planning disposition activity and terminating system at

appropriate end-of-system time.
Software Development Paradigm

The software development paradigm helps developer to select a strategy
to develop the software. A software development paradigm has its own set
of tools, methods and procedures, which are expressed clearly and defines
software development life cycle. A few of software development paradigms
or process models are defined as follows:
Waterfall Model
Waterfall model is the simplest model of software development paradigm.
It says the all the phases of SDLC will function one after another in linear
manner. That is, when the first phase is finished then only the second
phase will start and so on.
This model assumes that everything is carried out and taken place
perfectly as planned in the previous stage and there is no need to think
about the past issues that may arise in the next phase. This model does
not work smoothly if there are some issues left at the previous step. The
sequential nature of model does not allow us go back and undo or redo
our actions.
This model is best suited when developers already have designed and
developed similar software in the past and are aware of all its domains.
Iterative Model
This model leads the software development process in iterations. It
projects the process of development in cyclic manner repeating every step
after every cycle of SDLC process.
10 | c o p y - p a s t e f r o m t u t o r i a l p o i n t s . c o m
The software is first developed on very small scale and all the steps are
followed which are taken into consideration. Then, on every next iteration,
more features and modules are designed, coded, tested and added to the
software. Every cycle produces a software, which is complete in itself and
has more features and capabilities than that of the previous one.
After each iteration, the management team can do work on risk

management and prepare for the next iteration. Because a cycle includes
small portion of whole software process, it is easier to manage the
development process but it consumes more resources.
Spiral Model
Spiral model is a combination of both, iterative model and one of the SDLC
model. It can be seen as if you choose one SDLC model and combine it
with cyclic process (iterative model).
This model considers risk, which often goes un-noticed by most other
models. The model starts with determining objectives and constraints of
the software at the start of one iteration. Next phase is of prototyping the
software. This includes risk analysis. Then one standard SDLC model is
used to build the software. In the fourth phase of the plan of next iteration
is prepared.
V – model
The major drawback of waterfall model is we move to the next stage only
when the previous one is finished and there was no chance to go back if
something is found wrong in later stages. V-Model provides means of
testing of software at each stage in reverse manner.
At every stage, test plans and test cases are created to verify and validate
the product according to the requirement of that stage. For example, in
requirement gathering stage the test team prepares all the test cases in
correspondence to the requirements. Later, when the product is developed
and is ready for testing, test cases of this stage verify the software against
its validity towards requirements at this stage.
This makes both verification and validation go in parallel. This model is

also known as verification and validation model.
Big Bang Model

This model is the simplest model in its form. It requires little planning, lots
of programming and lots of funds. This model is conceptualized around the
big bang of universe. As scientists say that after big bang lots of galaxies,
planets and stars evolved just as an event. Likewise, if we put together
lots of programming and funds, you may achieve the best software
product.
For this model, very small amount of planning is required. It does not
follow any process, or at times the customer is not sure about the
requirements and future needs. So the input requirements are arbitrary.
This model is not suitable for large software projects but good one for
learning and experimenting.
The job pattern of an IT company engaged in software development can

be seen split in two parts:
 Software Creation
 Software Project Management
A project is well-defined task, which is a collection of several operations

done in order to achieve a goal (for example, software development and
delivery). A Project can be characterized as:
 Every project may has a unique and distinct goal.
 Project is not routine activity or day-to-day operations.
 Project comes with a start time and end time.
 Project ends when its goal is achieved hence it is a temporary phase in the
lifetime of an organization.
 Project needs adequate resources in terms of time, manpower, finance,

material and knowledge-bank.
Software Project
A Software Project is the complete procedure of software development
from requirement gathering to testing and maintenance, carried out
according to the execution methodologies, in a specified period of time to
achieve intended software product.
Need of software project management

Software is said to be an intangible product. Software development is a
kind of all new stream in world business and there’s very little experience
in building software products. Most software products are tailor made to
fit client’s requirements. The most important is that the underlying
technology changes and advances so frequently and rapidly that
experience of one product may not be applied to the other one. All such
business and environmental constraints bring risk in software development
hence it is essential to manage software projects efficiently.
The image above shows triple constraints for software projects. It is an

essential part of software organization to deliver quality product, keeping
the cost within client’s budget constrain and deliver the project as per
scheduled. There are several factors, both internal and external, which
may impact this triple constrain triangle. Any of three factor can severely
impact the other two.
Therefore, software project management is essential to incorporate user

requirements along with budget and time constraints.
Software Project Manager

A software project manager is a person who undertakes the responsibility
of executing the software project. Software project manager is thoroughly
aware of all the phases of SDLC that the software would go through.
Project manager may never directly involve in producing the end product
but he controls and manages the activities involved in production.
A project manager closely monitors the development process, prepares

and executes various plans, arranges necessary and adequate resources,
maintains communication among all team members in order to address
issues of cost, budget, resources, time, quality and customer satisfaction.
Let us see few responsibilities that a project manager shoulders -
Managing People
 Act as project leader
 Liaison with stakeholders
 Managing human resources
 Setting up reporting hierarchy etc.
Managing Project
 Defining and setting up project scope
 Managing project management activities
 Monitoring progress and performance
 Risk analysis at every phase
 Take necessary step to avoid or come out of problems
 Act as project spokesperson
Software Management Activities

Software project management comprises of a number of activities, which
contains planning of project, deciding scope of software product,
estimation of cost in various terms, scheduling of tasks and events, and
resource management. Project management activities may include:
 Project Planning
 Scope Management
 Project Estimation
Project Planning
Software project planning is task, which is performed before the
production of software actually starts. It is there for the software
production but involves no concrete activity that has any direction
connection with software production; rather it is a set of multiple
processes, which facilitates software production. Project planning may
include the following:
Scope Management
It defines the scope of project; this includes all the activities, process need
to be done in order to make a deliverable software product. Scope
management is essential because it creates boundaries of the project by

clearly defining what would be done in the project and what would not be
done. This makes project to contain limited and quantifiable tasks, which
can easily be documented and in turn avoids cost and time overrun.
During Project Scope management, it is necessary to -
 Define the scope
 Decide its verification and control
 Divide the project into various smaller parts for ease of management.
 Verify the scope
 Control the scope by incorporating changes to the scope
Project Estimation
For an effective management accurate estimation of various measures is
a must. With correct estimation managers can manage and control the
project more efficiently and effectively.
Project estimation may involve the following:
 Software size estimation
Software size may be estimated either in terms of KLOC (Kilo Line of Code) or
by calculating number of function points in the software. Lines of code depend
upon coding practices and Function points vary according to the user or
software requirement.
 Effort estimation
The managers estimate efforts in terms of personnel requirement and man-

hour required to produce the software. For effort estimation software size
should be known. This can either be derived by managers’ experience,
organization’s historical data or software size can be converted into efforts by
using some standard formulae.
 Time estimation
Once size and efforts are estimated, the time required to produce the software
can be estimated. Efforts required is segregated into sub categories as per the
requirement specifications and interdependency of various components of
software. Software tasks are divided into smaller tasks, activities or events by
Work Breakthrough Structure (WBS). The tasks are scheduled on day-to-day

basis or in calendar months.
The sum of time required to complete all tasks in hours or days is the total
time invested to complete the project.
 Cost estimation
This might be considered as the most difficult of all because it depends on

more elements than any of the previous ones. For estimating project cost, it
is required to consider -
o Size of software
o Software quality
o Hardware
o Additional software or tools, licenses etc.
o Skilled personnel with task-specific skills
o Travel involved
o Communication
o Training and support
Project Estimation Techniques

We discussed various parameters involving project estimation such as size,
effort, time and cost.
Project manager can estimate the listed factors using two broadly
recognized techniques –
Decomposition Technique
This technique assumes the software as a product of various compositions.
There are two main models -
 Line of Code Estimation is done on behalf of number of line of codes in the

software product.
 Function Points Estimation is done on behalf of number of function points in

the software product.
Empirical Estimation Technique

This technique uses empirically derived formulae to make
estimation.These formulae are based on LOC or FPs.
 Putnam Model
This model is made by Lawrence H. Putnam, which is based on Norden’s

frequency distribution (Rayleigh curve). Putnam model maps time and efforts
required with software size.
 COCOMO
COCOMO stands for COnstructive COst MOdel, developed by Barry W. Boehm.

It divides the software product into three categories of software: organic,
semi-detached and embedded.
Project Scheduling
Project Scheduling in a project refers to roadmap of all activities to be done
with specified order and within time slot allotted to each activity. Project
managers tend to define various tasks, and project milestones and them
arrange them keeping various factors in mind. They look for tasks lie in
critical path in the schedule, which are necessary to complete in specific
manner (because of task interdependency) and strictly within the time
allocated. Arrangement of tasks which lies out of critical path are less likely
to impact over all schedule of the project.
For scheduling a project, it is necessary to -
 Break down the project tasks into smaller, manageable form
 Find out various tasks and correlate them
 Estimate time frame required for each task
 Divide time into work-units
 Assign adequate number of work-units for each task
 Calculate total time required for the project from start to finish
Resource management
All elements used to develop a software product may be assumed as
resource for that project. This may include human resource, productive
tools and software libraries.
The resources are available in limited quantity and stay in the organization
as a pool of assets. The shortage of resources hampers the development
of project and it can lag behind the schedule. Allocating extra resources
increases development cost in the end. It is therefore necessary to
estimate and allocate adequate resources for the project.
Resource management includes -
 Defining proper organization project by creating a project team and allocating

responsibilities to each team member
 Determining resources required at a particular stage and their availability
 Manage Resources by generating resource request when they are required

and de-allocating them when they are no more needed.
Project Risk Management

Risk management involves all activities pertaining to identification,
analyzing and making provision for predictable and non-predictable risks
in the project. Risk may include the following:
 Experienced staff leaving the project and new staff coming in.
 Change in organizational management.
 Requirement change or misinterpreting requirement.
 Under-estimation of required time and resources.
 Technological changes, environmental changes, business competition.
Risk Management Process

There are following activities involved in risk management process:
 Identification - Make note of all possible risks, which may occur in the
project.
 Categorize - Categorize known risks into high, medium and low risk intensity
as per their possible impact on the project.
 Manage - Analyze the probability of occurrence of risks at various phases.

Make plan to avoid or face risks. Attempt to minimize their side-effects.
 Monitor - Closely monitor the potential risks and their early symptoms. Also
monitor the effects of steps taken to mitigate or avoid them.
Project Execution & Monitoring

In this phase, the tasks described in project plans are executed according
to their schedules.
Execution needs monitoring in order to check whether everything is going

according to the plan. Monitoring is observing to check the probability of
risk and taking measures to address the risk or report the status of various
tasks.
These measures include -
 Activity Monitoring - All activities scheduled within some task can be

monitored on day-to-day basis. When all activities in a task are completed, it
is considered as complete.
 Status Reports - The reports contain status of activities and tasks completed
within a given time frame, generally a week. Status can be marked as
finished, pending or work-in-progress etc.
 Milestones Checklist - Every project is divided into multiple phases where

major tasks are performed (milestones) based on the phases of SDLC. This
milestone checklist is prepared once every few weeks and reports the status
of milestones.
Project Communication Management

Effective communication plays vital role in the success of a project. It
bridges gaps between client and the organization, among the team
members as well as other stake holders in the project such as hardware
suppliers.
Communication can be oral or written. Communication management

process may have the following steps:
 Planning - This step includes the identifications of all the stakeholders in the
project and the mode of communication among them. It also considers if any
additional communication facilities are required.
 Sharing - After determining various aspects of planning, manager focuses on

sharing correct information with the correct person on correct time. This
keeps every one involved the project up to date with project progress and its
status.
 Feedback - Project managers use various measures and feedback

mechanism and create status and performance reports. This mechanism
ensures that input from various stakeholders is coming to the project
manager as their feedback.
 Closure - At the end of each major event, end of a phase of SDLC or end of
the project itself, administrative closure is formally announced to update
every stakeholder by sending email, by distributing a hardcopy of document

or by other mean of effective communication.
After closure, the team moves to next phase or project.
Configuration Management
Configuration management is a process of tracking and controlling the
changes in software in terms of the requirements, design, functions and
development of the product.
IEEE defines it as “the process of identifying and defining the items in the
system, controlling the change of these items throughout their life cycle,
recording and reporting the status of items and change requests, and
verifying the completeness and correctness of items”.
Generally, once the SRS is finalized there is less chance of requirement of

changes from user. If they occur, the changes are addressed only with
prior approval of higher management, as there is a possibility of cost and
time overrun.
Baseline
A phase of SDLC is assumed over if it baselined, i.e. baseline is a
measurement that defines completeness of a phase. A phase is baselined
when all activities pertaining to it are finished and well documented. If it
was not the final phase, its output would be used in next immediate phase.
Configuration management is a discipline of organization administration,

which takes care of occurrence of any change (process, requirement,
technological, strategical etc.) after a phase is baselined. CM keeps check
on any changes done in software.
Change Control
Change control is function of configuration management, which ensures
that all changes made to software system are consistent and made as per
organizational rules and regulations.
A change in the configuration of product goes through following steps -
 Identification - A change request arrives from either internal or external

source. When change request is identified formally, it is properly documented.
 Validation - Validity of the change request is checked and its handling

procedure is confirmed.
 Analysis - The impact of change request is analyzed in terms of schedule, cost

and required efforts. Overall impact of the prospective change on system is
analyzed.
 Control - If the prospective change either impacts too many entities in the
system or it is unavoidable, it is mandatory to take approval of high authorities
before change is incorporated into the system. It is decided if the change is
worth incorporation or not. If it is not, change request is refused formally.
 Execution - If the previous phase determines to execute the change request,

this phase take appropriate actions to execute the change, does a thorough
revision if necessary.
 Close request - The change is verified for correct implementation and

merging with the rest of the system. This newly incorporated change in the
software is documented properly and the request is formally is closed.
Project Management Tools

The risk and uncertainty rises multifold with respect to the size of the
project, even when the project is developed according to set
methodologies.
There are tools available, which aid for effective project management. A
few are described -
Gantt Chart
Gantt charts was devised by Henry Gantt (1917). It represents project
schedule with respect to time periods. It is a horizontal bar chart with bars
representing activities and time scheduled for the project activities.
PERT Chart
PERT (Program Evaluation & Review Technique) chart is a tool that depicts
project as network diagram. It is capable of graphically representing main
events of project in both parallel and consecutive way. Events, which occur
one after another, show dependency of the later event over the previous
one.
Events are shown as numbered nodes. They are connected by labeled

arrows depicting sequence of tasks in the project.
Resource Histogram
This is a graphical tool that contains bar or chart representing number of
resources (usually skilled staff) required over time for a project event (or
phase). Resource Histogram is an effective tool for staff planning and
coordination.
Critical Path Analysis

This tools is useful in recognizing interdependent tasks in the project. It
also helps to find out the shortest path or critical path to complete the
project successfully. Like PERT diagram, each event is allotted a specific
time frame. This tool shows dependency of event assuming an event can
proceed to next only if the previous one is completed.
The events are arranged according to their earliest possible start time.
Path between start and end node is critical path which cannot be further
reduced and all events require to be executed in same order.
The software requirements are description of features and functionalities

of the target system. Requirements convey the expectations of users from
the software product. The requirements can be obvious or hidden, known
or unknown, expected or unexpected from client’s point of view.
Requirement Engineering
The process to gather the software requirements from client, analyze and
document them is known as requirement engineering.
The goal of requirement engineering is to develop and maintain

sophisticated and descriptive ‘System Requirements Specification’
document.
Requirement Engineering Process

It is a four step process, which includes –
 Feasibility Study
 Requirement Gathering
 Software Requirement Specification
 Software Requirement Validation
Let us see the process briefly -
Feasibility study
When the client approaches the organization for getting the desired
product developed, it comes up with rough idea about what all functions
the software must perform and which all features are expected from the
software.
Referencing to this information, the analysts does a detailed study about

whether the desired system and its functionality are feasible to develop.
This feasibility study is focused towards goal of the organization. This study
analyzes whether the software product can be practically materialized in
terms of implementation, contribution of project to organization, cost
constraints and as per values and objectives of the organization. It
explores technical aspects of the project and product such as usability,
maintainability, productivity and integration ability.
The output of this phase should be a feasibility study report that should
contain adequate comments and recommendations for management about
whether or not the project should be undertaken.
Requirement Gathering
If the feasibility report is positive towards undertaking the project, next
phase starts with gathering requirements from the user. Analysts and
engineers communicate with the client and end-users to know their ideas
on what the software should provide and which features they want the
software to include.
Software Requirement Specification

SRS is a document created by system analyst after the requirements are
collected from various stakeholders.
SRS defines how the intended software will interact with hardware,
external interfaces, speed of operation, response time of system,
portability of software across various platforms, maintainability, speed of
recovery after crashing, Security, Quality, Limitations etc.
The requirements received from client are written in natural language. It

is the responsibility of system analyst to document the requirements in
technical language so that they can be comprehended and useful by the
software development team.
SRS should come up with following features:
 User Requirements are expressed in natural language.
 Technical requirements are expressed in structured language, which is used

inside the organization.
 Design description should be written in Pseudo code.
 Format of Forms and GUI screen prints.
 Conditional and mathematical notations for DFDs etc.
Software Requirement Validation

After requirement specifications are developed, the requirements
mentioned in this document are validated. User might ask for illegal,
impractical solution or experts may interpret the requirements incorrectly.
This results in huge increase in cost if not nipped in the bud. Requirements
can be checked against following conditions -
 If they can be practically implemented
 If they are valid and as per functionality and domain of software
 If there are any ambiguities
 If they are complete
 If they can be demonstrated
Requirement Elicitation Process

Requirement elicitation process can be depicted using the folloiwng

diagram:
 Requirements gathering - The developers discuss with the client and end
users and know their expectations from the software.
 Organizing Requirements - The developers prioritize and arrange the

requirements in order of importance, urgency and convenience.
 Negotiation & discussion - If requirements are ambiguous or there are some

conflicts in requirements of various stakeholders, if they are, it is then
negotiated and discussed with stakeholders. Requirements may then be
prioritized and reasonably compromised.
The requirements come from various stakeholders. To remove the ambiguity

and conflicts, they are discussed for clarity and correctness. Unrealistic
requirements are compromised reasonably.
 Documentation - All formal & informal, functional and non-functional

requirements are documented and made available for next phase processing.
Requirement Elicitation Techniques

Requirements Elicitation is the process to find out the requirements for an
intended software system by communicating with client, end users,
system users and others who have a stake in the software system
development.
There are various ways to discover requirements
Interviews
Interviews are strong medium to collect requirements. Organization may
conduct several types of interviews such as:
 Structured (closed) interviews, where every single information to gather is

decided in advance, they follow pattern and matter of discussion firmly.
 Non-structured (open) interviews, where information to gather is not decided

in advance, more flexible and less biased.
 Oral interviews
 Written interviews
 One-to-one interviews which are held between two persons across the table.
 Group interviews which are held between groups of participants. They help to
uncover any missing requirement as numerous people are involved.
Surveys
Organization may conduct surveys among various stakeholders by
querying about their expectation and requirements from the upcoming
system.
Questionnaires
A document with pre-defined set of objective questions and respective
options is handed over to all stakeholders to answer, which are collected
and compiled.
A shortcoming of this technique is, if an option for some issue is not

mentioned in the questionnaire, the issue might be left unattended.
Task analysis
Team of engineers and developers may analyze the operation for which
the new system is required. If the client already has some software to
perform certain operation, it is studied and requirements of proposed
system are collected.
Domain Analysis
Every software falls into some domain category. The expert people in the
domain can be a great help to analyze general and specific requirements.
Brainstorming
An informal debate is held among various stakeholders and all their inputs
are recorded for further requirements analysis.
Prototyping
Prototyping is building user interface without adding detail functionality for
user to interpret the features of intended software product. It helps giving
better idea of requirements. If there is no software installed at client’s end
for developer’s reference and the client is not aware of its own
requirements, the developer creates a prototype based on initially
mentioned requirements. The prototype is shown to the client and the
feedback is noted. The client feedback serves as an input for requirement
gathering.
Observation
Team of experts visit the client’s organization or workplace. They observe

the actual working of the existing installed systems. They observe the
workflow at client’s end and how execution problems are dealt. The team
itself draws some conclusions which aid to form requirements expected
from the software.
Software Requirements Characteristics

Gathering software requirements is the foundation of the entire software
development project. Hence they must be clear, correct and well-defined.
A complete Software Requirement Specifications must be:
 Clear
 Correct
 Consistent
 Coherent
 Comprehensible
 Modifiable
 Verifiable
 Prioritized
 Unambiguous
 Traceable
 Credible source
Software Requirements
We should try to understand what sort of requirements may arise in the
requirement elicitation phase and what kinds of requirements are expected
from the software system.
Broadly software requirements should be categorized in two categories:
Functional Requirements
Requirements, which are related to functional aspect of software fall into
this category.
They define functions and functionality within and from the software
system.
EXAMPLES -
 Search option given to user to search from various invoices.
 User should be able to mail any report to management.
 Users can be divided into groups and groups can be given separate rights.
 Should comply business rules and administrative functions.
 Software is developed keeping downward compatibility intact.
Non-Functional Requirements
Requirements, which are not related to functional aspect of software, fall
into this category. They are implicit or expected characteristics of software,
which users make assumption of.
Non-functional requirements include -
 Security
 Logging
 Storage
 Configuration
 Performance
 Cost
 Interoperability
 Flexibility
 Disaster recovery
 Accessibility
Requirements are categorized logically as
 Must Have : Software cannot be said operational without them.
 Should have : Enhancing the functionality of software.
 Could have : Software can still properly function with these requirements.
 Wish list : These requirements do not map to any objectives of software.
While developing software, ‘Must have’ must be implemented, ‘Should

have’ is a matter of debate with stakeholders and negation, whereas ‘could
have’ and ‘wish list’ can be kept for software updates.
User Interface requirements
UI is an important part of any software or hardware or hybrid system. A

software is widely accepted if it is -
 easy to operate
 quick in response
 effectively handling operational errors
 providing simple yet consistent user interface
User acceptance majorly depends upon how user can use the software. UI
is the only way for users to perceive the system. A well performing
software system must also be equipped with attractive, clear, consistent
and responsive user interface. Otherwise the functionalities of software
system can not be used in convenient way. A system is said be good if it
provides means to use it efficiently. User interface requirements are briefly
mentioned below -
 Content presentation
 Easy Navigation
 Simple interface
 Responsive
 Consistent UI elements
 Feedback mechanism
 Default settings
 Purposeful layout
 Strategical use of color and texture.
 Provide help information
 User centric approach
 Group based view settings.
Software System Analyst

System analyst in an IT organization is a person, who analyzes the
requirement of proposed system and ensures that requirements are
conceived and documented properly & correctly. Role of an analyst starts
during Software Analysis Phase of SDLC. It is the responsibility of analyst
to make sure that the developed software meets the requirements of the
client.
System Analysts have the following responsibilities:
 Analyzing and understanding requirements of intended software
 Understanding how the project will contribute in the organization objectives
 Identify sources of requirement
 Validation of requirement
 Develop and implement requirement management plan
 Documentation of business, technical, process and product requirements
 Coordination with clients to prioritize requirements and remove and ambiguity
 Finalizing acceptance criteria with client and other stakeholders
Software Metrics and Measures

Software Measures can be understood as a process of quantifying and
symbolizing various attributes and aspects of software.
Software Metrics provide measures for various aspects of software process

and software product.
Software measures are fundamental requirement of software engineering.

They not only help to control the software development process but also
aid to keep quality of ultimate product excellent.
According to Tom DeMarco, a (Software Engineer), “You cannot control

what you cannot measure.” By his saying, it is very clear how important
software measures are.
Let us see some software metrics:
 Size Metrics - LOC (Lines of Code), mostly calculated in thousands of

delivered source code lines, denoted as KLOC.
Function Point Count is measure of the functionality provided by the software.

Function Point count defines the size of functional aspect of software.
 Complexity Metrics - McCabe’s Cyclomatic complexity quantifies the upper

bound of the number of independent paths in a program, which is perceived
as complexity of the program or its modules. It is represented in terms of
graph theory concepts by using control flow graph.
 Quality Metrics - Defects, their types and causes, consequence, intensity of

severity and their implications define the quality of product.
The number of defects found in development process and number of defects

reported by the client after the product is installed or delivered at client-end,
define quality of product.
 Process Metrics - In various phases of SDLC, the methods and tools used,
the company standards and the performance of development are software
process metrics.
 Resource Metrics - Effort, time and various resources used, represents

metrics for resource measurement.
Software design is a process to transform user requirements into some

suitable form, which helps the programmer in software coding and
implementation.
For assessing user requirements, an SRS (Software Requirement

Specification) document is created whereas for coding and
implementation, there is a need of more specific and detailed requirements
in software terms. The output of this process can directly be used into
implementation in programming languages.
Software design is the first step in SDLC (Software Design Life Cycle),
which moves the concentration from problem domain to solution domain.
It tries to specify how to fulfill the requirements mentioned in SRS.
Software Design Levels

Software design yields three levels of results:
 Architectural Design - The architectural design is the highest abstract

version of the system. It identifies the software as a system with many
components interacting with each other. At this level, the designers get the
idea of proposed solution domain.
 High-level Design- The high-level design breaks the ‘single entity-multiple

component’ concept of architectural design into less-abstracted view of sub-
systems and modules and depicts their interaction with each other. High-level
design focuses on how the system along with all of its components can be
implemented in forms of modules. It recognizes modular structure of each
sub-system and their relation and interaction among each other.
 Detailed Design- Detailed design deals with the implementation part of what
is seen as a system and its sub-systems in the previous two designs. It is
more detailed towards modules and their implementations. It defines logical
structure of each module and their interfaces to communicate with other

modules.
Modularization
Modularization is a technique to divide a software system into multiple
discrete and independent modules, which are expected to be capable of
carrying out task(s) independently. These modules may work as basic
constructs for the entire software. Designers tend to design modules such
that they can be executed and/or compiled separately and independently.
Modular design unintentionally follows the rules of ‘divide and conquer’

problem-solving strategy this is because there are many other benefits
attached with the modular design of a software.
Advantage of modularization:
 Smaller components are easier to maintain
 Program can be divided based on functional aspects
 Desired level of abstraction can be brought in the program
 Components with high cohesion can be re-used again
 Concurrent execution can be made possible
 Desired from security aspect
Concurrency
Back in time, all software are meant to be executed sequentially. By
sequential execution we mean that the coded instruction will be executed
one after another implying only one portion of program being activated at
any given time. Say, a software has multiple modules, then only one of all
the modules can be found active at any time of execution.
In software design, concurrency is implemented by splitting the software

into multiple independent units of execution, like modules and executing
them in parallel. In other words, concurrency provides capability to the
software to execute more than one part of code in parallel to each other.
It is necessary for the programmers and designers to recognize those

modules, which can be made parallel execution.
Example
The spell check feature in word processor is a module of software, which
runs along side the word processor itself.
Coupling and Cohesion

When a software program is modularized, its tasks are divided into several
modules based on some characteristics. As we know, modules are set of
instructions put together in order to achieve some tasks. They are though,
considered as single entity but may refer to each other to work together.
There are measures by which the quality of a design of modules and their
interaction among them can be measured. These measures are called
coupling and cohesion.
Cohesion
Cohesion is a measure that defines the degree of intra-dependability within
elements of a module. The greater the cohesion, the better is the program
design.
There are seven types of cohesion, namely –
 Co-incidental cohesion - It is unplanned and random cohesion, which might

be the result of breaking the program into smaller modules for the sake of
modularization. Because it is unplanned, it may serve confusion to the
programmers and is generally not-accepted.
 Logical cohesion - When logically categorized elements are put together

into a module, it is called logical cohesion.
 Temporal Cohesion - When elements of module are organized such that

they are processed at a similar point in time, it is called temporal cohesion.
 Procedural cohesion - When elements of module are grouped together,

which are executed sequentially in order to perform a task, it is called
procedural cohesion.
 Communicational cohesion - When elements of module are grouped

together, which are executed sequentially and work on same data
(information), it is called communicational cohesion.
 Sequential cohesion - When elements of module are grouped because the

output of one element serves as input to another and so on, it is called
sequential cohesion.
 Functional cohesion - It is considered to be the highest degree of cohesion,

and it is highly expected. Elements of module in functional cohesion are
grouped because they all contribute to a single well-defined function. It can
also be reused.
Coupling
Coupling is a measure that defines the level of inter-dependability among
modules of a program. It tells at what level the modules interfere and
interact with each other. The lower the coupling, the better the program.
There are five levels of coupling, namely -
 Content coupling - When a module can directly access or modify or refer to

the content of another module, it is called content level coupling.
 Common coupling- When multiple modules have read and write access to
some global data, it is called common or global coupling.
 Control coupling- Two modules are called control-coupled if one of them

decides the function of the other module or changes its flow of execution.
 Stamp coupling- When multiple modules share common data structure and
work on different part of it, it is called stamp coupling.
 Data coupling- Data coupling is when two modules interact with each other
by means of passing data (as parameter). If a module passes data structure
as parameter, then the receiving module should use all its components.
Ideally, no coupling is considered to be the best.
Design Verification
The output of software design process is design documentation, pseudo
codes, detailed logic diagrams, process diagrams, and detailed description
of all functional or non-functional requirements.
The next phase, which is the implementation of software, depends on all

outputs mentioned above.
It is then becomes necessary to verify the output before proceeding to the

next phase. The early any mistake is detected, the better it is or it might
not be detected until testing of the product. If the outputs of design phase
are in formal notation form, then their associated tools for verification
should be used otherwise a thorough design review can be used for
verification and validation.
By structured verification approach, reviewers can detect defects that

might be caused by overlooking some conditions. A good design review is
important for good software design, accuracy and quality.
Software analysis and design includes all activities, which help the
transformation of requirement specification into implementation.
Requirement specifications specify all functional and non-functional
expectations from the software. These requirement specifications come in
the shape of human readable and understandable documents, to which a
computer has nothing to do.
Software analysis and design is the intermediate stage, which helps

human-readable requirements to be transformed into actual code.
Let us see few analysis and design tools used by software designers:
Data Flow Diagram

Data flow diagram is graphical representation of flow of data in an
information system. It is capable of depicting incoming data flow, outgoing
data flow and stored data. The DFD does not mention anything about how
data flows through the system.
There is a prominent difference between DFD and Flowchart. The flowchart

depicts flow of control in program modules. DFDs depict flow of data in the
system at various levels. DFD does not contain any control or branch
elements.
Types of DFD
Data Flow Diagrams are either Logical or Physical.
 Logical DFD - This type of DFD concentrates on the system process, and
flow of data in the system.For example in a Banking software system, how
data is moved between different entities.
 Physical DFD - This type of DFD shows how the data flow is actually
implemented in the system. It is more specific and close to the
implementation.
DFD Components
DFD can represent Source, destination, storage and flow of data using the
following set of components -
 Entities - Entities are source and destination of information data. Entities are
represented by a rectangles with their respective names.
 Process - Activities and action taken on the data are represented by Circle or
Round-edged rectangles.
 Data Storage - There are two variants of data storage - it can either be
represented as a rectangle with absence of both smaller sides or as an open-
sided rectangle with only one side missing.
 Data Flow - Movement of data is shown by pointed arrows. Data movement

is shown from the base of arrow as its source towards head of the arrow as
destination.
Levels of DFD
 Level 0 - Highest abstraction level DFD is known as Level 0 DFD, which

depicts the entire information system as one diagram concealing all the
underlying details. Level 0 DFDs are also known as context level DFDs.
 Level 1 - The Level 0 DFD is broken down into more specific, Level 1 DFD.
Level 1 DFD depicts basic modules in the system and flow of data among
various modules. Level 1 DFD also mentions basic processes and sources of
information.
 Level 2 - At this level, DFD shows how data flows inside the modules
mentioned in Level 1.
Higher level DFDs can be transformed into more specific lower level DFDs with
deeper level of understanding unless the desired level of specification is
achieved.
Structure Charts
Structure chart is a chart derived from Data Flow Diagram. It represents
the system in more detail than DFD. It breaks down the entire system into
lowest functional modules, describes functions and sub-functions of each
module of the system to a greater detail than DFD.
Structure chart represents hierarchical structure of modules. At each layer

a specific task is performed.
Here are the symbols used in construction of structure charts -
 Module - It represents process or subroutine or task. A control module

branches to more than one sub-module. Library Modules are re-usable and
invokable from any module.
 Condition - It is represented by small diamond at the base of module. It

depicts that control module can select any of sub-routine based on some
condition.
 Jump - An arrow is shown pointing inside the module to depict that the
control will jump in the middle of the sub-module.
 Loop - A curved arrow represents loop in the module. All sub-modules
covered by loop repeat execution of module.
 Data flow - A directed arrow with empty circle at the end represents data
flow.
 Control flow - A directed arrow with filled circle at the end represents
control flow.
HIPO Diagram
HIPO (Hierarchical Input Process Output) diagram is a combination of two
organized method to analyze the system and provide the means of
documentation. HIPO model was developed by IBM in year 1970.
HIPO diagram represents the hierarchy of modules in the software system.

Analyst uses HIPO diagram in order to obtain high-level view of system
functions. It decomposes functions into sub-functions in a hierarchical
manner. It depicts the functions performed by system.
HIPO diagrams are good for documentation purpose. Their graphical

representation makes it easier for designers and managers to get the
pictorial idea of the system structure.
In contrast to IPO (Input Process Output) diagram, which depicts the flow
of control and data in a module, HIPO does not provide any information
about data flow or control flow.
Example
Both parts of HIPO diagram, Hierarchical presentation and IPO Chart are
used for structure design of software program as well as documentation of
the same.
Structured English
Most programmers are unaware of the large picture of software so they
only rely on what their managers tell them to do. It is the responsibility of
higher software management to provide accurate information to the
programmers to develop accurate yet fast code.
Other forms of methods, which use graphs or diagrams, may are

sometimes interpreted differently by different people.
Hence, analysts and designers of the software come up with tools such as
Structured English. It is nothing but the description of what is required to
code and how to code it. Structured English helps the programmer to write
error-free code.
Other form of methods, which use graphs or diagrams, may are sometimes
interpreted differently by different people. Here, both Structured English
and Pseudo-Code tries to mitigate that understanding gap.
Structured English is the It uses plain English words in structured

programming paradigm. It is not the ultimate code but a kind of
description what is required to code and how to code it. The following are
some tokens of structured programming.
IF-THEN-ELSE,
DO-WHILE-UNTIL
Analyst uses the same variable and data name, which are stored in Data
Dictionary, making it much simpler to write and understand the code.
Example
We take the same example of Customer Authentication in the online
shopping environment. This procedure to authenticate customer can be
written in Structured English as:
Enter Customer_Name
SEEK Customer_Name in Customer_Name_DB file
IF Customer_Name found THEN
Call procedure USER_PASSWORD_AUTHENTICATE()
ELSE
PRINT error message
Call procedure NEW_CUSTOMER_REQUEST()
ENDIF
The code written in Structured English is more like day-to-day spoken

English. It can not be implemented directly as a code of software.
Structured English is independent of programming language.
Pseudo-Code
Pseudo code is written more close to programming language. It may be
considered as augmented programming language, full of comments and
descriptions.
Pseudo code avoids variable declaration but they are written using some
actual programming language’s constructs, like C, Fortran, Pascal etc.
Pseudo code contains more programming details than Structured English.

It provides a method to perform the task, as if a computer is executing
the code.
Example
Program to print Fibonacci up to n numbers.
void function Fibonacci
Get value of n;
Set value of a to 1;
Set value of b to 1;
Initialize I to 0
for (i=0; i< n; i++)
if a greater than b
Increase b by a;
Print b;
else if b greater than a
increase a by b;
print a;
Decision Tables
A Decision table represents conditions and the respective actions to be
taken to address them, in a structured tabular format.
It is a powerful tool to debug and prevent errors. It helps group similar

information into a single table and then by combining tables it delivers
easy and convenient decision-making.
Creating Decision Table

To create the decision table, the developer must follow basic four steps:
 Identify all possible conditions to be addressed
 Determine actions for all identified conditions
 Create Maximum possible rules
 Define action for each rule
Decision Tables should be verified by end-users and can lately be simplified

by eliminating duplicate rules and actions.
Example
Let us take a simple example of day-to-day problem with our Internet
connectivity. We begin by identifying all problems that can arise while
starting the internet and their respective possible solutions.
We list all possible problems under column conditions and the prospective
actions under column Actions.
Conditions/Actions Rules
Conditions Shows Connected N N N N Y Y Y Y
Ping is Working N N Y Y N N Y Y
Opens Website Y N Y N Y N Y N
Check network cable X
Check internet router X X X X
Actions Restart Web Browser X
Contact Service provider X X X X X X
Do no action
Table : Decision Table – In-house Internet Troubleshooting
Entity-Relationship Model
Entity-Relationship model is a type of database model based on the notion
of real world entities and relationship among them. We can map real world
scenario onto ER database model. ER Model creates a set of entities with
their attributes, a set of constraints and relation among them.
ER Model is best used for the conceptual design of database. ER Model can
be represented as follows :
 Entity - An entity in ER Model is a real world being, which has some properties
called attributes. Every attribute is defined by its corresponding set of values,
called domain.
For example, Consider a school database. Here, a student is an entity. Student

has various attributes like name, id, age and class etc.
 Relationship - The logical association among entities is called relationship.

Relationships are mapped with entities in various ways. Mapping cardinalities
define the number of associations between two entities.
Mapping cardinalities:
o one to one
o one to many
o many to one
o many to many
Data Dictionary
Data dictionary is the centralized collection of information about data. It
stores meaning and origin of data, its relationship with other data, data
format for usage etc. Data dictionary has rigorous definitions of all names
in order to facilitate user and software designers.
Data dictionary is often referenced as meta-data (data about data)

repository. It is created along with DFD (Data Flow Diagram) model of
software program and is expected to be updated whenever DFD is changed
or updated.
Requirement of Data Dictionary

The data is referenced via data dictionary while designing and
implementing software. Data dictionary removes any chances of
ambiguity. It helps keeping work of programmers and designers
synchronized while using same object reference everywhere in the
program.
Data dictionary provides a way of documentation for the complete

database system in one place. Validation of DFD is carried out using data
dictionary.
Contents
Data dictionary should contain information about the following
 Data Flow
 Data Structure
 Data Elements
 Data Stores
 Data Processing
Data Flow is described by means of DFDs as studied earlier and

represented in algebraic form as described.
= Composed of
{} Repetition
() Optional
+ And
[/] Or
Example
Address = House No + (Street / Area) + City + State
Course ID = Course Number + Course Name + Course Level + Course

Grades
Data Elements
Data elements consist of Name and descriptions of Data and Control Items,
Internal or External data stores etc. with the following details:
 Primary Name
 Secondary Name (Alias)
 Use-case (How and where to use)
 Content Description (Notation etc. )
 Supplementary Information (preset values, constraints etc.)
Data Store
It stores the information from where the data enters into the system and
exists out of the system. The Data Store may include -
 Files
o Internal to software.
o External to software but on the same machine.
o External to software and system, located on different machine.
 Tables
o Naming convention
o Indexing property
Data Processing
There are two types of Data Processing:
 Logical: As user sees it
 Physical: As software sees it
Software design is a process to conceptualize the software requirements

into software implementation. Software design takes the user
requirements as challenges and tries to find optimum solution. While the

software is being conceptualized, a plan is chalked out to find the best
possible design for implementing the intended solution.
There are multiple variants of software design. Let us study them briefly:
Structured Design
Structured design is a conceptualization of problem into several well-
organized elements of solution. It is basically concerned with the solution
design. Benefit of structured design is, it gives better understanding of
how the problem is being solved. Structured design also makes it simpler
for designer to concentrate on the problem more accurately.
Structured design is mostly based on ‘divide and conquer’ strategy where

a problem is broken into several small problems and each small problem
is individually solved until the whole problem is solved.
The small pieces of problem are solved by means of solution modules.

Structured design emphasis that these modules be well organized in order
to achieve precise solution.
These modules are arranged in hierarchy. They communicate with each

other. A good structured design always follows some rules for
communication among multiple modules, namely -
Cohesion - grouping of all functionally related elements.
Coupling - communication between different modules.
A good structured design has high cohesion and low coupling

arrangements.
Function Oriented Design

In function-oriented design, the system is comprised of many smaller sub-
systems known as functions. These functions are capable of performing
significant task in the system. The system is considered as top view of all
functions.
Function oriented design inherits some properties of structured design

where divide and conquer methodology is used.
This design mechanism divides the whole system into smaller functions,
which provides means of abstraction by concealing the information and
their operation.. These functional modules can share information among
themselves by means of information passing and using information

available globally.
Another characteristic of functions is that when a program calls a function,

the function changes the state of the program, which sometimes is not
acceptable by other modules. Function oriented design works well where
the system state does not matter and program/functions work on input
rather than on a state.
Design Process
 The whole system is seen as how data flows in the system by means of data
flow diagram.
 DFD depicts how functions changes data and state of entire system.
 The entire system is logically broken down into smaller units known as
functions on the basis of their operation in the system.
 Each function is then described at large.
Object Oriented Design

Object oriented design works around the entities and their characteristics
instead of functions involved in the software system. This design strategies
focuses on entities and its characteristics. The whole concept of software
solution revolves around the engaged entities.
Let us see the important concepts of Object Oriented Design:
 Objects - All entities involved in the solution design are known as objects.
For example, person, banks, company and customers are treated as objects.
Every entity has some attributes associated to it and has some methods to
perform on the attributes.
 Classes - A class is a generalized description of an object. An object is an

instance of a class. Class defines all the attributes, which an object can have
and methods, which defines the functionality of the object.
In the solution design, attributes are stored as variables and functionalities

are defined by means of methods or procedures.
 Encapsulation - In OOD, the attributes (data variables) and methods

(operation on the data) are bundled together is called encapsulation.
Encapsulation not only bundles important information of an object together,
but also restricts access of the data and methods from the outside world. This
is called information hiding.
 Inheritance - OOD allows similar classes to stack up in hierarchical manner

where the lower or sub-classes can import, implement and re-use allowed
variables and methods from their immediate super classes. This property of
OOD is known as inheritance. This makes it easier to define specific class and
to create generalized classes from specific ones.
 Polymorphism - OOD languages provide a mechanism where methods

performing similar tasks but vary in arguments, can be assigned same name.
This is called polymorphism, which allows a single interface performing tasks
for different types. Depending upon how the function is invoked, respective
portion of the code gets executed.
Design Process
Software design process can be perceived as series of well-defined steps.
Though it varies according to design approach (function oriented or object
oriented, yet It may have the following steps involved:
 A solution design is created from requirement or previous used system and/or

system sequence diagram.
 Objects are identified and grouped into classes on behalf of similarity in

attribute characteristics.
 Class hierarchy and relation among them is defined.
 Application framework is defined.
Software Design Approaches

Here are two generic approaches for software designing:
Top Down Design

We know that a system is composed of more than one sub-systems and it
contains a number of components. Further, these sub-systems and
components may have their on set of sub-system and components and
creates hierarchical structure in the system.
Top-down design takes the whole software system as one entity and then
decomposes it to achieve more than one sub-system or component based
on some characteristics. Each sub-system or component is then treated as
a system and decomposed further. This process keeps on running until the
lowest level of system in the top-down hierarchy is achieved.
Top-down design starts with a generalized model of system and keeps on

defining the more specific part of it. When all components are composed
the whole system comes into existence.
Top-down design is more suitable when the software solution needs to be

designed from scratch and specific details are unknown.
Bottom-up Design
The bottom up design model starts with most specific and basic
components. It proceeds with composing higher level of components by
using basic or lower level components. It keeps creating higher level
components until the desired system is not evolved as one single
component. With each higher level, the amount of abstraction is increased.
Bottom-up strategy is more suitable when a system needs to be created

from some existing system, where the basic primitives can be used in the
newer system.
Both, top-down and bottom-up approaches are not practical individually.

Instead, a good combination of both is used.
The term complexity stands for state of events or things, which have
multiple interconnected links and highly complicated structures. In
software programming, as the design of software is realized, the number
of elements and their interconnections gradually emerge to be huge, which
becomes too difficult to understand at once.
Software design complexity is difficult to assess without using complexity

metrics and measures. Let us see three important software complexity
measures.
Halstead's Complexity Measures

In 1977, Mr. Maurice Howard Halstead introduced metrics to measure
software complexity. Halstead’s metrics depends upon the actual
implementation of program and its measures, which are computed directly
from the operators and operands from source code, in static manner. It
allows to evaluate testing time, vocabulary, size, difficulty, errors, and
efforts for C/C++/Java source code.
According to Halstead, “A computer program is an implementation of an

algorithm considered to be a collection of tokens which can be classified
as either operators or operands”. Halstead metrics think a program as

sequence of operators and their associated operands.
He defines various indicators to check complexity of module.
Parameter Meaning
n1 Number of unique operators
n2 Number of unique operands
N1 Number of total occurrence of operators
N2 Number of total occurrence of operands
When we select source file to view its complexity details in Metric Viewer,
the following result is seen in Metric Report:
Metric Meaning Mathematical Representation
n Vocabulary n1 + n2
N Size N1 + N2
V Volume Length * Log2 Vocabulary
D Difficulty (n1/2) * (N1/n2)
E Efforts Difficulty * Volume
B Errors Volume / 3000
T Testing time Time = Efforts / S, where S=18 seconds.
Cyclomatic Complexity Measures

Every program encompasses statements to execute in order to perform
some task and other decision-making statements that decide, what
statements need to be executed. These decision-making constructs
change the flow of the program.
If we compare two programs of same size, the one with more decision-
making statements will be more complex as the control of program jumps
frequently.
McCabe, in 1976, proposed Cyclomatic Complexity Measure to quantify

complexity of a given software. It is graph driven model that is based on
decision-making constructs of program such as if-else, do-while, repeat-
until, switch-case and goto statements.
Process to make flow control graph:
 Break program in smaller blocks, delimited by decision-making constructs.
 Create nodes representing each of these nodes.
 Connect nodes as follows:
o If control can branch from block i to block j
Draw an arc
o From exit node to entry node
Draw an arc.
To calculate Cyclomatic complexity of a program module, we use the

formula -
V(G) = e – n + 2
Where
e is total number of edges
n is total number of nodes
The Cyclomatic complexity of the above module is
e = 10
n = 8
Cyclomatic Complexity = 10 - 8 + 2
= 4
According to P. Jorgensen, Cyclomatic Complexity of a module should not

exceed 10.
Function Point
It is widely used to measure the size of software. Function Point
concentrates on functionality provided by the system. Features and
functionality of the system are used to measure the software complexity.
Function point counts on five parameters, named as External Input,

External Output, Logical Internal Files, External Interface Files, and
External Inquiry. To consider the complexity of software each parameter
is further categorized as simple, average or complex.
Let us see parameters of function point:
External Input
Every unique input to the system, from outside, is considered as external
input. Uniqueness of input is measured, as no two inputs should have same
formats. These inputs can either be data or control parameters.
 Simple - if input count is low and affects less internal files
 Complex - if input count is high and affects more internal files
 Average - in-between simple and complex.
External Output
All output types provided by the system are counted in this category.
Output is considered unique if their output format and/or processing are
unique.
 Simple - if output count is low
 Complex - if output count is high
 Average - in between simple and complex.
Logical Internal Files

Every software system maintains internal files in order to maintain its
functional information and to function properly. These files hold logical
data of the system. This logical data may contain both functional data and
control data.
 Simple - if number of record types are low
 Complex - if number of record types are high
External Interface Files

Software system may need to share its files with some external software
or it may need to pass the file for processing or as parameter to some
function. All these files are counted as external interface files.
 Simple - if number of record types in shared file are low
 Complex - if number of record types in shared file are high
External Inquiry
An inquiry is a combination of input and output, where user sends some
data to inquire about as input and the system responds to the user with
the output of inquiry processed. The complexity of a query is more than
External Input and External Output. Query is said to be unique if its input
and output are unique in terms of format and data.
 Simple - if query needs low processing and yields small amount of output data
 Complex - if query needs high process and yields large amount of output data
Each of these parameters in the system is given weightage according to

their class and complexity. The table below mentions the weightage given
to each parameter:
Parameter Simple Average Complex
Inputs 3 4 6
Outputs 4 5 7
Enquiry 3 4 6
Files 7 10 15
Interfaces 5 7 10
The table above yields raw Function Points. These function points are
adjusted according to the environment complexity. System is described
using fourteen different characteristics:
 Data communications
 Distributed processing
 Performance objectives
 Operation configuration load
 Transaction rate
 Online data entry,
 End user efficiency
 Online update
 Complex processing logic
 Re-usability
 Installation ease
 Operational ease
 Multiple sites
 Desire to facilitate changes
These characteristics factors are then rated from 0 to 5, as mentioned

below:
 No influence
 Incidental
 Moderate
 Average
 Significant
 Essential
All ratings are then summed up as N. The value of N ranges from 0 to 70

(14 types of characteristics x 5 types of ratings). It is used to calculate
Complexity Adjustment Factors (CAF), using the following formulae:
CAF = 0.65 + 0.01N
Then,
Delivered Function Points (FP)= CAF x Raw FP
This FP can then be used in various metrics, such as:
Cost = $ / FP
Quality = Errors / FP
Productivity = FP / person-month
software implementation.
Structured Programming
In the process of coding, the lines of code keep multiplying, thus, size of
the software increases. Gradually, it becomes next to impossible to
remember the flow of program. If one forgets how software and its
underlying programs, files, procedures are constructed it then becomes
very difficult to share, debug and modify the program. The solution to this
is structured programming. It encourages the developer to use
subroutines and loops instead of using simple jumps in the code, thereby
bringing clarity in the code and improving its efficiency Structured
programming also helps programmer to reduce coding time and organize
code properly.
Structured programming states how the program shall be coded.

Structured programming uses three main concepts:
 Top-down analysis - A software is always made to perform some rational

work. This rational work is known as problem in the software parlance. Thus
it is very important that we understand how to solve the problem. Under top-
down analysis, the problem is broken down into small pieces where each one
has some significance. Each problem is individually solved and steps are
clearly stated about how to solve the problem.
 Modular Programming - While programming, the code is broken down into

smaller group of instructions. These groups are known as modules,
subprograms or subroutines. Modular programming based on the
understanding of top-down analysis. It discourages jumps using ‘goto’
statements in the program, which often makes the program flow non-
traceable. Jumps are prohibited and modular format is encouraged in
structured programming.
 Structured Coding - In reference with top-down analysis, structured coding

sub-divides the modules into further smaller units of code in the order of their
execution. Structured programming uses control structure, which controls the
flow of the program, whereas structured coding uses control structure to
organize its instructions in definable patterns.
Functional Programming
Functional programming is style of programming language, which uses the
concepts of mathematical functions. A function in mathematics should
always produce the same result on receiving the same argument. In
procedural languages, the flow of the program runs through procedures,
i.e. the control of program is transferred to the called procedure. While
control flow is transferring from one procedure to another, the program
changes its state.
In procedural programming, it is possible for a procedure to produce

different results when it is called with the same argument, as the program
itself can be in different state while calling it. This is a property as well as
a drawback of procedural programming, in which the sequence or timing
of the procedure execution becomes important.
Functional programming provides means of computation as mathematical

functions, which produces results irrespective of program state. This
makes it possible to predict the behavior of the program.
Functional programming uses the following concepts:
 First class and High-order functions - These functions have capability to

accept another function as argument or they return other functions as results.
 Pure functions - These functions do not include destructive updates, that is,
they do not affect any I/O or memory and if they are not in use, they can
easily be removed without hampering the rest of the program.
 Recursion - Recursion is a programming technique where a function calls

itself and repeats the program code in it unless some pre-defined condition
matches. Recursion is the way of creating loops in functional programming.
 Strict evaluation - It is a method of evaluating the expression passed to a

function as an argument. Functional programming has two types of evaluation
methods, strict (eager) or non-strict (lazy). Strict evaluation always evaluates
the expression before invoking the function. Non-strict evaluation does not
evaluate the expression unless it is needed.
 λ-calculus - Most functional programming languages use λ-calculus as their

type systems. λ-expressions are executed by evaluating them as they occur.
Common Lisp, Scala, Haskell, Erlang and F# are some examples of

functional programming languages.
Programming style
Programming style is set of coding rules followed by all the programmers
to write the code. When multiple programmers work on the same software
project, they frequently need to work with the program code written by
some other developer. This becomes tedious or at times impossible, if all
developers do not follow some standard programming style to code the
program.
An appropriate programming style includes using function and variable

names relevant to the intended task, using well-placed indentation,
commenting code for the convenience of reader and overall presentation
of code. This makes the program code readable and understandable by all,
which in turn makes debugging and error solving easier. Also, proper
coding style helps ease the documentation and updation.
Coding Guidelines
Practice of coding style varies with organizations, operating systems and
language of coding itself.
The following coding elements may be defined under coding guidelines of

an organization:
 Naming conventions - This section defines how to name functions, variables,

constants and global variables.
 Indenting - This is the space left at the beginning of line, usually 2-8
whitespace or single tab.
 Whitespace - It is generally omitted at the end of line.
 Operators - Defines the rules of writing mathematical, assignment and logical

operators. For example, assignment operator ‘=’ should have space before
and after it, as in “x = 2”.
 Control Structures - The rules of writing if-then-else, case-switch, while-until

and for control flow statements solely and in nested fashion.
 Line length and wrapping - Defines how many characters should be there
in one line, mostly a line is 80 characters long. Wrapping defines how a line
should be wrapped, if is too long.
 Functions - This defines how functions should be declared and invoked, with
and without parameters.
 Variables - This mentions how variables of different data types are declared
and defined.
 Comments - This is one of the important coding components, as the

comments included in the code describe what the code actually does and all
other associated descriptions. This section also helps creating help
documentations for other developers.
Software Documentation
Software documentation is an important part of software process. A well
written document provides a great tool and means of information
repository necessary to know about software process. Software
documentation also provides information about how to use the product.
A well-maintained documentation should involve the following documents:
 Requirement documentation - This documentation works as key tool for

software designer, developer and the test team to carry out their respective
tasks. This document contains all the functional, non-functional and behavioral
description of the intended software.
Source of this document can be previously stored data about the software,
already running software at the client’s end, client’s interview, questionnaires
and research. Generally it is stored in the form of spreadsheet or word
processing document with the high-end software management team.
This documentation works as foundation for the software to be developed and

is majorly used in verification and validation phases. Most test-cases are built
directly from requirement documentation.
 Software Design documentation - These documentations contain all the

necessary information, which are needed to build the software. It
contains: (a) High-level software architecture, (b) Software design
details, (c) Data flow diagrams, (d) Database design
These documents work as repository for developers to implement the

software. Though these documents do not give any details on how to code the
program, they give all necessary information that is required for coding and
implementation.
 Technical documentation - These documentations are maintained by the

developers and actual coders. These documents, as a whole, represent
information about the code. While writing the code, the programmers also
mention objective of the code, who wrote it, where will it be required, what it
does and how it does, what other resources the code uses, etc.
The technical documentation increases the understanding between various

programmers working on the same code. It enhances re-use capability of the
code. It makes debugging easy and traceable.
There are various automated tools available and some comes with the
programming language itself. For example java comes JavaDoc tool to
generate technical documentation of code.
 User documentation - This documentation is different from all the above

explained. All previous documentations are maintained to provide information
about the software and its development process. But user documentation
explains how the software product should work and how it should be used to
get the desired results.
These documentations may include, software installation procedures, how-to

guides, user-guides, uninstallation method and special references to get more
information like license updation etc.
Software Implementation Challenges

There are some challenges faced by the development team while
implementing the software. Some of them are mentioned below:
 Code-reuse - Programming interfaces of present-day languages are very

sophisticated and are equipped huge library functions. Still, to bring the cost
down of end product, the organization management prefers to re-use the
code, which was created earlier for some other software. There are huge
issues faced by programmers for compatibility checks and deciding how much
code to re-use.
 Version Management - Every time a new software is issued to the customer,

developers have to maintain version and configuration related documentation.
This documentation needs to be highly accurate and available on time.
 Target-Host - The software program, which is being developed in the

organization, needs to be designed for host machines at the customers end.
But at times, it is impossible to design a software that works on the target
machines.
Software Testing is evaluation of the software against requirements

gathered from users and system specifications. Testing is conducted at the
phase level in software development life cycle or at module level in
program code. Software testing comprises of Validation and Verification.
Software Validation
Validation is process of examining whether or not the software satisfies
the user requirements. It is carried out at the end of the SDLC. If the
software matches requirements for which it was made, it is validated.
 Validation ensures the product under development is as per the user

requirements.
 Validation answers the question – "Are we developing the product which

attempts all that user needs from this software ?".
 Validation emphasizes on user requirements.
Software Verification
Verification is the process of confirming if the software is meeting the
business requirements, and is developed adhering to the proper
specifications and methodologies.
 Verification ensures the product being developed is according to design

specifications.
 Verification answers the question– "Are we developing this product by firmly

following all design specifications ?"
 Verifications concentrates on the design and system specifications.
Target of the test are -
 Errors - These are actual coding mistakes made by developers. In addition,

there is a difference in output of software and desired output, is considered as
an error.
 Fault - When error exists fault occurs. A fault, also known as a bug, is a result
of an error which can cause system to fail.
 Failure - failure is said to be the inability of the system to perform the desired
task. Failure occurs when fault exists in the system.
Manual Vs Automated Testing

Testing can either be done manually or using an automated testing tool:
 Manual - This testing is performed without taking help of automated testing

tools. The software tester prepares test cases for different sections and levels
of the code, executes the tests and reports the result to the manager.
Manual testing is time and resource consuming. The tester needs to confirm
whether or not right test cases are used. Major portion of testing involves
manual testing.
 Automated This testing is a testing procedure done with aid of automated

testing tools. The limitations with manual testing can be overcome using
automated test tools.
A test needs to check if a webpage can be opened in Internet Explorer.

This can be easily done with manual testing. But to check if the web-server
can take the load of 1 million users, it is quite impossible to test manually.
There are software and hardware tools which helps tester in conducting
load testing, stress testing, regression testing.
Testing Approaches
Tests can be conducted based on two approaches –
 Functionality testing
 Implementation testing
When functionality is being tested without taking the actual

implementation in concern it is known as black-box testing. The other side
is known as white-box testing where not only functionality is tested but
the way it is implemented is also analyzed.
Exhaustive tests are the best-desired method for a perfect testing. Every
single possible value in the range of the input and output values is tested.
It is not possible to test each and every value in real world scenario if the
range of values is large.
Black-box testing
It is carried out to test functionality of the program. It is also called

‘Behavioral’ testing. The tester in this case, has a set of input values and
respective desired results. On providing input, if the output matches with
the desired results, the program is tested ‘ok’, and problematic otherwise.
In this testing method, the design and structure of the code are not known
to the tester, and testing engineers and end users conduct this test on the
software.
Black-box testing techniques:
 Equivalence class - The input is divided into similar classes. If one element
of a class passes the test, it is assumed that all the class is passed.
 Boundary values - The input is divided into higher and lower end values. If
these values pass the test, it is assumed that all values in between may pass
too.
 Cause-effect graphing - In both previous methods, only one input value at

a time is tested. Cause (input) – Effect (output) is a testing technique where
combinations of input values are tested in a systematic way.
 Pair-wise Testing - The behavior of software depends on multiple

parameters. In pairwise testing, the multiple parameters are tested pair-wise
for their different values.
 State-based testing - The system changes state on provision of input. These

systems are tested based on their states and input.
White-box testing
It is conducted to test program and its implementation, in order to improve
code efficiency or structure. It is also known as ‘Structural’ testing.
In this testing method, the design and structure of the code are known to
the tester. Programmers of the code conduct this test on the code.
The below are some White-box testing techniques:
 Control-flow testing - The purpose of the control-flow testing to set up test

cases which covers all statements and branch conditions. The branch
conditions are tested for both being true and false, so that all statements can
be covered.
 Data-flow testing - This testing technique emphasis to cover all the data
variables included in the program. It tests where the variables were declared
and defined and where they were used or changed.
Testing Levels
Testing itself may be defined at various levels of SDLC. The testing process
runs parallel to software development. Before jumping on the next stage,
a stage is tested, validated and verified.
Testing separately is done just to make sure that there are no hidden bugs
or issues left in the software. Software is tested on various levels -
Unit Testing
While coding, the programmer performs some tests on that unit of
program to know if it is error free. Testing is performed under white-box
testing approach. Unit testing helps developers decide that individual units
of the program are working as per requirement and are error free.
Integration Testing
Even if the units of software are working fine individually, there is a need
to find out if the units if integrated together would also work without
errors. For example, argument passing and data updation etc.
System Testing
The software is compiled as product and then it is tested as a whole. This
can be accomplished using one or more of the following tests:
 Functionality testing - Tests all functionalities of the software against the

requirement.
 Performance testing - This test proves how efficient the software is. It tests
the effectiveness and average time taken by the software to do desired task.
Performance testing is done by means of load testing and stress testing where
the software is put under high user and data load under various environment
conditions.
 Security & Portability - These tests are done when the software is meant to
work on various platforms and accessed by number of persons.
Acceptance Testing
When the software is ready to hand over to the customer it has to go
through last phase of testing where it is tested for user-interaction and
response. This is important because even if the software matches all user
requirements and if user does not like the way it appears or works, it may
be rejected.
 Alpha testing - The team of developer themselves perform alpha testing by

using the system as if it is being used in work environment. They try to find
out how user would react to some action in software and how the system
should respond to inputs.
 Beta testing - After the software is tested internally, it is handed over to the
users to use it under their production environment only for testing purpose.
This is not as yet the delivered product. Developers expect that users at this
stage will bring minute problems, which were skipped to attend.
Regression Testing
Whenever a software product is updated with new code, feature or
functionality, it is tested thoroughly to detect if there is any negative
impact of the added code. This is known as regression testing.
Testing Documentation
Testing documents are prepared at different stages -
Before Testing
Testing starts with test cases generation. Following documents are needed
for reference –
 SRS document - Functional Requirements document
 Test Policy document - This describes how far testing should take place
before releasing the product.
 Test Strategy document - This mentions detail aspects of test team,

responsibility matrix and rights/responsibility of test manager and test
engineer.
 Traceability Matrix document - This is SDLC document, which is related to

requirement gathering process. As new requirements come, they are added to
this matrix. These matrices help testers know the source of requirement. They
can be traced forward and backward.
While Being Tested

The following documents may be required while testing is started and is
being done:
 Test Case document - This document contains list of tests required to be

conducted. It includes Unit test plan, Integration test plan, System test plan
and Acceptance test plan.
 Test description - This document is a detailed description of all test cases

and procedures to execute them.
 Test case report - This document contains test case report as a result of the
test.
 Test logs - This document contains test logs for every test case report.
After Testing
The following documents may be generated after testing :
 Test summary - This test summary is collective analysis of all test reports
and logs. It summarizes and concludes if the software is ready to be launched.
The software is released under version control system if it is ready to launch.
Testing vs. Quality Control, Quality Assurance

and Audit
We need to understand that software testing is different from software
quality assurance, software quality control and software auditing.
 Software quality assurance - These are software development process

monitoring means, by which it is assured that all the measures are taken as
per the standards of organization. This monitoring is done to make sure that
proper software development methods were followed.
 Software quality control - This is a system to maintain the quality of

software product. It may include functional and non-functional aspects of
software product, which enhance the goodwill of the organization. This system
makes sure that the customer is receiving quality product for their
requirement and the product certified as ‘fit for use’.
 Software audit - This is a review of procedure used by the organization to

develop the software. A team of auditors, independent of development team
examines the software process, procedure, requirements and other aspects of
SDLC. The purpose of software audit is to check that software and its
development process, both conform standards, rules and regulations.
Software maintenance is widely accepted part of SDLC now a days. It

stands for all the modifications and updations done after the delivery of
software product. There are number of reasons, why modifications are
required, some of them are briefly mentioned below:
 Market Conditions - Policies, which changes over the time, such as taxation
and newly introduced constraints like, how to maintain bookkeeping, may
trigger need for modification.
 Client Requirements - Over the time, customer may ask for new features or
functions in the software.
 Host Modifications - If any of the hardware and/or platform (such as

operating system) of the target host changes, software changes are needed
to keep adaptability.
 Organization Changes - If there is any business level change at client end,

such as reduction of organization strength, acquiring another company,
organization venturing into new business, need to modify in the original
software may arise.
Types of maintenance
In a software lifetime, type of maintenance may vary based on its nature.
It may be just a routine maintenance tasks as some bug discovered by
some user or it may be a large event in itself based on maintenance size
or nature. Following are some types of maintenance based on their
characteristics:
 Corrective Maintenance - This includes modifications and updations done in

order to correct or fix problems, which are either discovered by user or
concluded by user error reports.
 Adaptive Maintenance - This includes modifications and updations applied

to keep the software product up-to date and tuned to the ever changing world
of technology and business environment.
 Perfective Maintenance - This includes modifications and updates done in

order to keep the software usable over long period of time. It includes new
features, new user requirements for refining the software and improve its
reliability and performance.
 Preventive Maintenance - This includes modifications and updations to

prevent future problems of the software. It aims to attend problems, which
are not significant at this moment but may cause serious issues in future.
Cost of Maintenance
Reports suggest that the cost of maintenance is high. A study on
estimating software maintenance found that the cost of maintenance is as
high as 67% of the cost of entire software process cycle.
On an average, the cost of software maintenance is more than 50% of all

SDLC phases. There are various factors, which trigger maintenance cost
go high, such as:
Real-world factors affecting Maintenance Cost
 The standard age of any software is considered up to 10 to 15 years.
 Older softwares, which were meant to work on slow machines with less
memory and storage capacity cannot keep themselves challenging against
newly coming enhanced softwares on modern hardware.
 As technology advances, it becomes costly to maintain old software.
 Most maintenance engineers are newbie and use trial and error method to
rectify problem.
 Often, changes made can easily hurt the original structure of the software,
making it hard for any subsequent changes.
 Changes are often left undocumented which may cause more conflicts in
future.
Software-end factors affecting Maintenance Cost
 Structure of Software Program
 Programming Language
 Dependence on external environment
 Staff reliability and availability
Maintenance Activities
IEEE provides a framework for sequential maintenance process activities.
It can be used in iterative manner and can be extended so that customized
items and processes can be included.
These activities go hand-in-hand with each of the following phase:
 Identification & Tracing - It involves activities pertaining to identification of

requirement of modification or maintenance. It is generated by user or system
may itself report via logs or error messages.Here, the maintenance type is
classified also.
 Analysis - The modification is analyzed for its impact on the system including
safety and security implications. If probable impact is severe, alternative
solution is looked for. A set of required modifications is then materialized into
requirement specifications. The cost of modification/maintenance is analyzed
and estimation is concluded.
 Design - New modules, which need to be replaced or modified, are designed

against requirement specifications set in the previous stage. Test cases are
created for validation and verification.
 Implementation - The new modules are coded with the help of structured
design created in the design step.Every programmer is expected to do unit
testing in parallel.
 System Testing - Integration testing is done among newly created modules.

Integration testing is also carried out between new modules and the system.
Finally the system is tested as a whole, following regressive testing
procedures.
 Acceptance Testing - After testing the system internally, it is tested for

acceptance with the help of users. If at this state, user complaints some issues
they are addressed or noted to address in next iteration.
 Delivery - After acceptance test, the system is deployed all over the
organization either by small update package or fresh installation of the system.
The final testing takes place at client end after the software is delivered.
Training facility is provided if required, in addition to the hard copy of user

manual.
 Maintenance management - Configuration management is an essential part

of system maintenance. It is aided with version control tools to control
versions, semi-version or patch management.
Software Re-engineering
When we need to update the software to keep it to the current market,
without impacting its functionality, it is called software re-engineering. It
is a thorough process where the design of software is changed and
programs are re-written.
Legacy software cannot keep tuning with the latest technology available in
the market. As the hardware become obsolete, updating of software
becomes a headache. Even if software grows old with time, its functionality
does not.
For example, initially Unix was developed in assembly language. When

language C came into existence, Unix was re-engineered in C, because
working in assembly language was difficult.
Other than this, sometimes programmers notice that few parts of software
need more maintenance than others and they also need re-engineering.
Re-Engineering Process
 Decide what to re-engineer. Is it whole software or a part of it?
 Perform Reverse Engineering, in order to obtain specifications of existing

software.
 Restructure Program if required. For example, changing function-oriented

programs into object-oriented programs.
 Re-structure data as required.
 Apply Forward engineering concepts in order to get re-engineered

software.
There are few important terms used in Software re-engineering
Reverse Engineering
It is a process to achieve system specification by thoroughly analyzing,
understanding the existing system. This process can be seen as reverse
SDLC model, i.e. we try to get higher abstraction level by analyzing lower
abstraction levels.
An existing system is previously implemented design, about which we

know nothing. Designers then do reverse engineering by looking at the
code and try to get the design. With design in hand, they try to conclude
the specifications. Thus, going in reverse from code to system
specification.
Program Restructuring
It is a process to re-structure and re-construct the existing software. It is
all about re-arranging the source code, either in same programming
language or from one programming language to a different one.
Restructuring can have either source code-restructuring and data-
restructuring or both.
Re-structuring does not impact the functionality of the software but

enhance reliability and maintainability. Program components, which cause
errors very frequently can be changed, or updated with re-structuring.
The dependability of software on obsolete hardware platform can be

removed via re-structuring.
Forward Engineering
Forward engineering is a process of obtaining desired software from the
specifications in hand which were brought down by means of reverse
engineering. It assumes that there was some software engineering already
done in the past.
Forward engineering is same as software engineering process with only

one difference – it is carried out always after reverse engineering.
Component reusability
A component is a part of software program code, which executes an
independent task in the system. It can be a small module or sub-system
itself.
Example
The login procedures used on the web can be considered as components,
printing system in software can be seen as a component of the software.
Components have high cohesion of functionality and lower rate of coupling,

i.e. they work independently and can perform tasks without depending on
other modules.
In OOP, the objects are designed are very specific to their concern and
have fewer chances to be used in some other software.
In modular programming, the modules are coded to perform specific tasks

which can be used across number of other software programs.
There is a whole new vertical, which is based on re-use of software

component, and is known as Component Based Software Engineering
(CBSE).
Re-use can be done at various levels
 Application level - Where an entire application is used as sub-system of new

software.
 Component level - Where sub-system of an application is used.
 Modules level - Where functional modules are re-used.
Software components provide interfaces, which can be used to establish

communication among different components.
Reuse Process
Two kinds of method can be adopted: either by keeping requirements
same and adjusting components or by keeping components same and
modifying requirements.
 Requirement Specification - The functional and non-functional

requirements are specified, which a software product must comply to, with the
help of existing system, user input or both.
 Design - This is also a standard SDLC process step, where requirements are
defined in terms of software parlance. Basic architecture of system as a whole
and its sub-systems are created.
 Specify Components - By studying the software design, the designers

segregate the entire system into smaller components or sub-systems. One
complete software design turns into a collection of a huge set of components
working together.
 Search Suitable Components - The software component repository is

referred by designers to search for the matching component, on the basis of
functionality and intended software requirements..
 Incorporate Components - All matched components are packed together to

shape them as complete software.
CASE stands for Computer Aided Software Engineering. It means,

development and maintenance of software projects with help of various
automated software tools.
CASE Tools
CASE tools are set of software application programs, which are used to
automate SDLC activities. CASE tools are used by software project
managers, analysts and engineers to develop software system.
There are number of CASE tools available to simplify various stages of

Software Development Life Cycle such as Analysis tools, Design tools,
Project management tools, Database Management tools, Documentation
tools are to name a few.
Use of CASE tools accelerates the development of project to produce

desired result and helps to uncover flaws before moving ahead with next
stage in software development.
Components of CASE Tools

CASE tools can be broadly divided into the following parts based on their
use at a particular SDLC stage:
 Central Repository - CASE tools require a central repository, which can serve
as a source of common, integrated and consistent information. Central
repository is a central place of storage where product specifications,
requirement documents, related reports and diagrams, other useful
information regarding management is stored. Central repository also serves
as data dictionary.
 Upper Case Tools - Upper CASE tools are used in planning, analysis and
design stages of SDLC.
 Lower Case Tools - Lower CASE tools are used in implementation, testing
and maintenance.
 Integrated Case Tools - Integrated CASE tools are helpful in all the stages
of SDLC, from Requirement gathering to Testing and documentation.
CASE tools can be grouped together if they have similar functionality,

process activities and capability of getting integrated with other tools.
Scope of Case Tools

The scope of CASE tools goes throughout the SDLC.
Case Tools Types

Now we briefly go through various CASE tools
Diagram tools
These tools are used to represent system components, data and control
flow among various software components and system structure in a
graphical form. For example, Flow Chart Maker tool for creating state-of-
the-art flowcharts.
Process Modeling Tools

Process modeling is method to create software process model, which is
used to develop the software. Process modeling tools help the managers
to choose a process model or modify it as per the requirement of software
product. For example, EPF Composer
Project Management Tools

These tools are used for project planning, cost and effort estimation,
project scheduling and resource planning. Managers have to strictly
comply project execution with every mentioned step in software project
management. Project management tools help in storing and sharing
project information in real-time throughout the organization. For example,
Creative Pro Office, Trac Project, Basecamp.
Documentation Tools
Documentation in a software project starts prior to the software process,
goes throughout all phases of SDLC and after the completion of the
project.
Documentation tools generate documents for technical users and end

users. Technical users are mostly in-house professionals of the
development team who refer to system manual, reference manual,
training manual, installation manuals etc. The end user documents
describe the functioning and how-to of the system such as user manual.
For example, Doxygen, DrExplain, Adobe RoboHelp for documentation.
Analysis Tools
These tools help to gather requirements, automatically check for any
inconsistency, inaccuracy in the diagrams, data redundancies or erroneous
omissions. For example, Accept 360, Accompa, CaseComplete for
requirement analysis, Visible Analyst for total analysis.
Design Tools
These tools help software designers to design the block structure of the
software, which may further be broken down in smaller modules using
refinement techniques. These tools provides detailing of each module and
interconnections among modules. For example, Animated Software Design
Configuration Management Tools

An instance of software is released under one version. Configuration
Management tools deal with –
 Version and revision management
 Baseline configuration management
 Change control management
CASE tools help in this by automatic tracking, version management and

release management. For example, Fossil, Git, Accu REV.
Change Control Tools

These tools are considered as a part of configuration management tools.
They deal with changes made to the software after its baseline is fixed or
when the software is first released. CASE tools automate change tracking,
file management, code management and more. It also helps in enforcing
change policy of the organization.
Programming Tools
These tools consist of programming environments like IDE (Integrated
Development Environment), in-built modules library and simulation tools.
These tools provide comprehensive aid in building software product and
include features for simulation and testing. For example, Cscope to search
code in C, Eclipse.
Prototyping Tools
Software prototype is simulated version of the intended software product.

Prototype provides initial look and feel of the product and simulates few
aspect of actual product.
Prototyping CASE tools essentially come with graphical libraries. They can
create hardware independent user interfaces and design. These tools help
us to build rapid prototypes based on existing information. In addition,
they provide simulation of software prototype. For example, Serena
prototype composer, Mockup Builder.
Web Development Tools

These tools assist in designing web pages with all allied elements like
forms, text, script, graphic and so on. Web tools also provide live preview
of what is being developed and how will it look after completion. For
example, Fontello, Adobe Edge Inspect, Foundation 3, Brackets.
Quality Assurance Tools

Quality assurance in a software organization is monitoring the engineering
process and methods adopted to develop the software product in order to
ensure conformance of quality as per organization standards. QA tools
consist of configuration and change control tools and software testing
tools. For example, SoapTest, AppsWatch, JMeter.
Maintenance Tools
Software maintenance includes modifications in the software product after
it is delivered. Automatic logging and error reporting techniques,
automatic error ticket generation and root cause Analysis are few CASE
tools, which help software organization in maintenance phase of SDLC. For
example, Bugzilla for defect tracking, HP Quality Center.

Software Engineering

Uploaded by

Copyright:

Available Formats

Software Engineering

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Software Engineering

Uploaded by

Copyright:

Available Formats

Software engineering.

Software project management has wider scope than software engineering

Software is more than just a program code. A program is an executable

Engineering on the other hand, is all about developing products, using

Software engineering is an engineering branch associated with

IEEE defines software engineering as:

(1) The application of a systematic,disciplined,quantifiable approach to the

(2) The study of approaches as in the above statement.

Fritz Bauer, a German computer scientist, defines software engineering

Software engineering is the establishment and use of sound engineering

Evolution starts from the requirement gathering process. After which

2|co p y -p as te fr om tu tori alp oin ts. com

Software Evolution Laws

 S-type (static-type) - This is a software, which works strictly according to

 P-type (practical-type) - This is a software with a collection

 E-type (embedded-type) - This software works closely as the requirement

E-Type software evolution

 Continuing change - An E-type software system must continue to adapt to

 Increasing complexity - As an E-type software system evolves, its

 Conservation of familiarity - The familiarity with the software or the

 Continuing growth- In order for an E-type system intended to resolve some

 Reducing quality - An E-type software system declines in quality unless

3|co p y -p as te fr om tu tori alp oin ts. com

 Feedback systems- The E-type software systems constitute multi-loop,

 Self-regulation - E-type system evolution processes are self-regulating with

 Organizational stability - The average effective global activity rate in an

Programming paradigm is a subset of Software design paradigm which is

Software Development Paradigm

4|co p y -p as te fr om tu tori alp oin ts. com

Software Design Paradigm

Need of Software Engineering

 Large software - It is easier to build a wall than to a house or building,

 Scalability- If the software process were not based on scientific and

 Dynamic Nature- The always growing and adapting nature of software

 Quality Management- Better process of software development provides

Characteristics of good software

Well-engineered and crafted software is expected to have the following

6|co p y -p as te fr om tu tori alp oin ts. com

In short, Software engineering is a branch of computer science, which uses

Software Development Life Cycle, SDLC for short, is a well-defined,

7|co p y -p as te fr om tu tori alp oin ts. com

 studying the existing or obsolete system and software,

 conducting interviews of users and developers,

 referring to the database or

 collecting answers from the questionnaires.

This step is also known as programming phase. The implementation of

Operation and Maintenance

9|co p y -p as te fr om tu tori alp oin ts. com

the system, planning disposition activity and terminating system at

Software Development Paradigm

After each iteration, the management team can do work on risk

This makes both verification and validation go in parallel. This model is

Big Bang Model

The job pattern of an IT company engaged in software development can

 Software Project Management

A project is well-defined task, which is a collection of several operations

 Every project may has a unique and distinct goal.

 Project is not routine activity or day-to-day operations.

 Project comes with a start time and end time.