Model Curriculum

LED Light Repair Technician

SECTOR: ELECTRONICS
SUB-SECTOR: LED LIGHTING
LED LIGHT TESTING AND
OCCUPATION: QUALITY ASSURANCE
REF. ID: ELE/Q9302 VERSION1.0
NSQF LEVEL: 4
 TABLE OF CONTENTS

1. Curriculum 01

2. Trainer Prerequisites 05

3. Annexure: Assessment Criteria 06

LED Light Repair Technician
CURRICULUM / SYLLABUS
This program is aimed at training candidates for the job of a “LED Light Repair Technician”, in the “Electronics”
Sector/Industry and aims at building the following key competencies amongst the learner

Program Name LED Light Repair Technician

Qualification Pack Name & LED Light Repair Technician

Reference ID. ID (ELE/Q4605)version 1.0

Version No. 1.0 Version Update Date 07 – 12 – 2015

Pre•requisites to Training ITI

Diploma
Minimum 6 months as helper
Training Outcomes After completing this programme, participants will be able to:
• Interact with the customer in order to identify and understand the problem in
the television set
• Understanding of the basics of power electronics and its usages in lighting
controls, or LED power supplies and LED drivers
• Special safety and handling precautions to be taken during LED luminary testing
• 5S standards (sorting, setting, standardize, sustain, shining) + safety, security
• Follow behavior etiquettes while interacting with others
• Ensure customer satisfaction
• Identify dysfunctional components through visual inspection and by use of
multi-meter
• To understand, various electronic & electrical components, materials and their
specific properties & usages
• Communicate effectively
• Establishing good working relationships with colleagues within and outside the
department by coordinating

LED Light Repair Technician 1

This course encompasses 3 out of 3 National Occupational Standards (NOS) of “LED Light Repair Technician”
Qualification Pack issued by “Electronics Sector skill Council of India”.

Sr. Module Key Learning Outcomes Equipment Required

No.
1 Basic Electronics Individual will understand companies various 1. Multi-meter.
policies like Health and Hygiene, environment, 2. Diode.
Theory Duration quality, fire and safety, child labor, incentives, 3. Resistor.
(hh:mm) personnel management, work flow, individual’s 4. Capacitor.
10:00 role in organization, organization structure, 5. Transistor(BJT,FET).
Practical Duration profile of customer etc
(hh:mm) • To know & identify the circuit components.
10:00 • Understanding the electrical properties of
Corresponding NOS different components.
Code • Calculation of resistance by identifying the
ELE/N9302 color code.
• Understand the functionality of coil.
• Winding of coil.
• Biasing of transistor.
• Current amplification circuit.
• Designing of filter.
• Types of LED
2 Employability Skills Planning, Problem Solving, team coordination 1. Braid board.
Decision Making. Reflective thinking, Critical 2. Verro board.
Theory Duration Thinking, multitasking, process disruption and 3. Inductor. 4.Resistor.
(hh:mm) delays, to improve work process, Interacting 5.Capacitor.
10:00 with Supervisor and Colleagues, Follow Safety 6.Transistor(BJT,FET).
Practical Duration Standards 7.Transformer.
(hh:mm) 8.Soldering Iron.
20:00 9.Soldering ware.
Corresponding NOS 10.Desoldering pump
Code
ELE/N9201
ELE/N9919
3 Measuring tools & • Understand the functionality of multimeter. 1.AC to DC regulated power
instruments • Explain different modes of testing in supply.
multimeter. 2.Ammeter.
Theory Duration • Ensure the probes of the multimeter is 3.voltmeter.
(hh:mm) connected properly before any particular 4.Multimeter.
10:00 test. 5. Power meter.
Practical Duration • Handling of regulated power supply unit.
(hh:mm) • Following proper safety methods before
20:00 attaching a light for testing.
Corresponding NOS • Precautious dealing with AC & DC current
Code
ELE/N9302 ELE/N9921
4 Assembly Section • Operating SMT machine in case of 1.SMT machine. 2.Reflow
replacement. oven.
Theory Duration • Soldering of semiconductor devices 3. Manual screen printer.
(hh:mm) following safety measures. 4.PCB
10:00 • Use of ESD gloves while dealing with LED’s. 5. Soldering Iron.
6. Soldering ware.
7.Desoldering pump

LED Light Repair Technician 2

Sr. Module Key Learning Outcomes Equipment Required
No.
Practical Duration
(hh:mm)
15:00

Corresponding NOS
Code
ELE/N9921
5 Test & Measurement – I • Finding the required test pint while 1. AC to DC regulated power
checking of a assembled circuit. supply.
Theory Duration • Checking proper connectivity while testing 2. AC to AC regulated power
(hh:mm) the driver circuit. supply.
10:00 • Selecting proper temperature for soldering 3. Screw Driver set.
Practical Duration of components while using a temperature 4. Cutter
(hh:mm) controlling solder iron. 5. Stripper.
15:00 • Discussing with senior about any kind of 6. LED driver tester.
Corresponding NOS major failure in a circuit.
Code • Completing Base Assembly, Completing
ELE/N9302 ELE/N9919 Heat Sink Assembly, Joining base assembly
with heat sink assembly
6 Test & Measurement – II • Explaining the principal of illumination from 1. Screw Driver set.
a LED. 2.Cutter 3. Stripper.
Theory Duration • Explaining the properties of LED e.g. lumen, 4.Multimeter.
(hh:mm) Flux, efficacy, CRI etc. 5. AC to DC regulated power
10:00 • Testing of the above mentioned parameters supply.
Practical Duration using a lamp analysis system. 6. AC to AC regulated power
(hh:mm) • Replacing a malfunctioning LED identifying supply.
20:00 the reason of the malfunctioning. 7.Integrating Sphere.
Corresponding NOS 8.Spectroradiometer. 8.LUX
Code meter.
ELE/N9302 9.Power meter.

7 Service & Maintenance • Explaining various blocks of a LED light driving 1.Stripper.
circuit. 2.Cutter.
Theory Duration • Analyzing the fault by approaching each 3.Screw driver set. 3.plier.
(hh:mm) block. 4. Multimeter.
20:00 • Selection of alternate spare in case of 5.Soldering pump.
Practical Duration unavailability of components. 6.Soldering iron.
(hh:mm) • Ensure the fault before demounting any
40:00 element from the circuit.
Corresponding NOS • Continuing the test process until the every
Code test process is checked properly.
ELE/N9302 ELE/N9921 • Ensure that the repaired lighting system is
ok before sending it to mechanical
assembling
8 Basic Reading and To document the number of PCB processed,
Writing skills components processed inwards and outwards,
to have basic co-ordinate geometry for
Theory Duration understanding X-Y coordinates on PCB, to
(hh:mm) deliver frame to next work process, red feeder
10:00 charts and board designs, understanding BOM,
Practical Duration to improve overall work process.

LED Light Repair Technician 3

Sr. Module Key Learning Outcomes Equipment Required
No.
(hh:mm)
10:00
Corresponding NOS
Code
ELE/N9201
9 Interaction with the • Understand the requirements. a)Laptop.
customers & colleagues, • Communicate effectively. b)Projector
concept of team work. • Understand building of team coordination.
• Take feedback of customer satisfaction.
Theory Duration
(hh:mm)
10:00
Practical Duration
(hh:mm)
20:00
Corresponding NOS
Code
ELE/N9919
Total Duration: Unique Equipment Required:
Multimeter
Theory Diode
Duration Resistor
Transistor
(hh:mm)
Inductor
100:00
Resistor
Capacitor
Practical Duration Braid board
(hh:mm) Verro board
160:00 Transformer
Soldering Iron
Soldering ware
Desoldering pump
AC to DC regulated power supply
Ammeter
voltmeter
Power meter
SMT machine
Reflow oven
Manual screen printer
PCB
Cutter
Stripper
LED driver tester
Integrating Sphere
Spectro radio meter
LUX meter
Laptop
Projector

Grand Total Course Duration: 315 Hours 00 Minutes

This syllabus/ curriculum has been approved by Electronics Sector Skill Council

LED Light Repair Technician 4

Trainer Prerequisites for Job role: “LED Light Repair Technician” mapped to
Qualification Pack: “ELE/Q9302version1.0”

Sr.
Area Details
No.
1 Job Description The individual at work checks the non-functional LED light in a systematic
manner to find out the fault; dismantles it; repairs the fault and reassemble
the light to make it functional.
2 Personal Attributes The individual must be willing to work in the field and travel through the
day from one customer’s premise to another. Punctuality, amenable
behaviour, patience, good interpersonal relationship building,
trustworthiness, integrity, and critical thinking are important attributes for
this Job
3 Minimum Educational Diploma in Electronics with at least 1-2 years of experience in LED Light
Qualifications Repair Technician and Should have excellent communication skills
4a Domain Certification Certified for Job Role: “LED Light Repair Technician” mapped to QP:
“ELE/Q9302version1.0”. Minimum accepted score =70%
4b Platform Certification Recommended that the Trainer is certified for the Job Role: “Trainer”,
mapped to the Qualification Pack: ““SSC/Q1402”. Minimum accepted score
=70%
5 Experience 1-2 years of experience in LED Light Repair.

LED Light Repair Technician 5

Annexure: Assessment Criteria

Assessment Criteria for “LED Light Repair Technician”

Job Role LED Light Repair Technician
Qualification Pack ELE/Q9302version1.0
Sector Skill Council Electronics Sector Skills Council of India

Sr. Guidelines for Assessment

No.
1 Criteria for assessment for each Qualification Pack will be created by the Sector Skill Council. Each
Performance Criteria (PC) will be assigned marks proportional to its importance in NOS. SSC will also lay down
proportion of marks for Theory and Skills Practical for each PC.
2 The assessment for the theory part will be based on knowledge bank of questions created by the SSC.
3 Individual assessment agencies will create unique question papers for theory part for each candidate at each
examination/training centre (as per assessment criteria below)
4 Individual assessment agencies will create unique evaluations for skill practical for every student at each
examination/training centre based on this criteria
5 To pass the Qualification Pack , every trainee should score a minimum of 70% in every NOS
6 In case of successfully passing only certain number of NOS's, the trainee is eligible to take subsequent
assessment on the balance NOS's to pass the Qualification Pack.

LED Light Repair Technician 6

Sr. NOS No. NOS Name Total Marks Marks Marks
No. Marks Allocation: Allocation: Allocation:
Skills Knowledge Behaviour
1 ELE/N9302 Diagnose and repair fault in LED Light 100 60 40

2 ELE/N9919 Work with superiors and colleagues 100 60 40

3 ELE/N9921 Follow safety standards 100 60 40
Total: 300 180 120
Percentage Weightage: 60% 40%
Minimum Pass% to qualify: 70% 70%

LED Light Repair Technician 7