Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 249 views

    Alaris GW - Oxps

    Uploaded by

    Edgar Dauzon
    This document provides information about operating an IV infusion pump. It describes key components like the flow stop mechanism and sensor switches. It outlines configuration and calibration procedures. It also includes maintenance instructions, troubleshooting tips, circuit descriptions, specifications, and lists of spare parts and compatible IV sets.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Alaris GW - Oxps

    Uploaded by

    Edgar Dauzon
    249 views77 pages
    This document provides information about operating an IV infusion pump. It describes key components like the flow stop mechanism and sensor switches. It outlines configuration and calibration procedures. It also includes maintenance instructions, troubleshooting tips, circuit descriptions, specifications, and lists of spare parts and compatible IV sets.

    Original Description:

    Syringe pump Alaris

    Original Title

    Alaris GW.oxps

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about operating an IV infusion pump. It describes key components like the flow stop mechanism and sensor switches. It outlines configuration and calibration procedures. It also includes maintenance instructions, troubleshooting tips, circuit descriptions, specifications, and lists of spare parts and compatible IV sets.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    249 views77 pages

    Alaris GW - Oxps

    Uploaded by

    Edgar Dauzon
    This document provides information about operating an IV infusion pump. It describes key components like the flow stop mechanism and sensor switches. It outlines configuration and calibration procedures. It also includes maintenance instructions, troubleshooting tips, circuit descriptions, specifications, and lists of spare parts and compatible IV sets.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 77

    As part of a policy of continuous improvement, product

    Wherever you see this symbol in the m

    about. A typical example is a software upgrade that you should


    check has been installed.
    Flow Stop Mechanism
    When activated the
    fluid
    flow.

    Sensor

    door is closed.
    Switches the pump on and off.

    Primes the IV infusion set.


    Administers bolus during the infusion.

    Resets numeric values to zero.


    Silences alarms and warnings for 1 minute.

    Scrolls between rate, time, VTBI and total volume infused (VI).
    Enters values for selected infusion/configuration parameters.
    Confirms the rate during an infusion titration.

    Starts and stops the infusion.


    Cancels alarm.

    Increases or decreases the infusion rate, TIME limit and VTBI.


    Press and hold to increase the selection speed.
    Used to adjust user selectable options.

    When any of the following are illuminated:

    pump
    Bolus Infusions - while infusing
    Configuration & Calibration
    Configuration & Calibration
    Configuration & Calibration

    1. Enter the access code 2.


    2. Press to step through all Cal values.
    3. Switch the pump "OFF" if there are no further tests to be done at that time.

    7. Press the key. When the key is pressed, the low point calibration value will be stored.
    Configuration & Calibration
    Routine Maintenance
    Routine Maintenance

    30cm

    30cm
    Routine Maintenance
    Routine Maintenance
    Routine Maintenance
    Routine Maintenance
    Routine Maintenance
    Troubleshooting
    Troubleshooting
    Troubleshooting
    Circuit Descriptions
    Circuit Descriptions
    Circuit Descriptions

    Control PCB Key Pressure


    Switches Sensor

    Door Motor
    Sensor Encoders

    Display Motor
    Air
    LEDs Control
    Sensor
    (Door)

    Air Sensor Air Safety


    (Front panel) Sensors Backup

    Audible Audible Backup


    Alarm Alarm Speaker

    Flow Backup
    Flow Sensor Battery
    Sensor

    Programming Power
    Programming Comms
    Connection Box Distribution

    JP6 JP1

    JP4 JP2

    AC Mains
    Inlet
    RS232/
    Comms Power
    Nursecall
    Connector Module

    Battery
    IrDA PSU & Comms PCB
    1. Unplug the four-way connector for the two air sensors.
    2. Unscrew the door air sensor from the back of the door and pull out the two wires through the hole to free the sensor.

    3. Carefully push out the front panel air sensor, while moving the three retaining lugs towards the centre of the sensor, by
    pressing gently on the encapsulated area with a screwdriver. Again, pull the two wires free from the front case.
    4. Reassemble in reverse order.
    Separate the front and rear case halves;
    Remove the PSU and Comms. PCB;
    Remove the pole clamp;
    Remove battery.

    It is necessary to apply a new alarm code label and back panel label (with serial number
    and voltage information) at the end of assembly. These labels are language and pump
    specific.
    Write the serial number and build issue of the pump on the two labels provided. Stick
    the larger one behind the window in the new back panel label and fix the second onto
    the back of the new case.
    Pole clamp assembly
    Specifications
    Specifications

    ±5% at 25 ml/h under nominal conditions2


    Tested to EN60601-2-24 (90% confidence interval / 95% population).

    Notes:
    Specifications

    Calibration units of measure The units of measurement used in the calibration procedure are:
    1. Millilitres (ml) volume of fluid.
    2. Millilitres per hour (ml/h) for volumetric flow rate.
    3. Millimetres of mercury (mmHg) or KpA for pressure.
    4. Hours:minutes (h:min) for time.
    5. Volts (V) for battery voltage.

    Dimensions 137mm (w) x 140mm (h) x 105mm (d).

    Weight: 1.5kg (excluding power cable).


    U U
    U U

    U U
    U U

    U U
    U U

    U U
    U U

    UT
    Spare Parts Listing
    Spare Parts Listing
    Spare Parts Listing
    Fitting & Replacement Guidelines
    Fitting & Replacement Guidelines
    Compatible IV infusion sets
    Compatible IV infusion sets
    Configuration Records
    Updates

    You might also like