Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 69 views

    Lateral Loads of 4 Level Shelving, With Hilti Anchorage, Based On ASCE 7-16

    Uploaded by

    kosdsds
    This document summarizes the lateral load calculations for a 4-level shelving unit and a 3-level storage rack according to ASCE 7-16 and ASCE 7-10, respectively. Key results include: 1) The base shear for the shelving is 437 lbs and for the rack is 543 lbs. 2) The vertical distribution of forces is calculated to determine the load at each level. 3) Anchor calculations show the shelving anchorage is satisfactory but the rack anchorage is unsatisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Lateral Loads of 4 Level Shelving, With Hilti Anchorage, Based On ASCE 7-16

    Uploaded by

    kosdsds
    69 views12 pages
    This document summarizes the lateral load calculations for a 4-level shelving unit and a 3-level storage rack according to ASCE 7-16 and ASCE 7-10, respectively. Key results include: 1) The base shear for the shelving is 437 lbs and for the rack is 543 lbs. 2) The vertical distribution of forces is calculated to determine the load at each level. 3) Anchor calculations show the shelving anchorage is satisfactory but the rack anchorage is unsatisfactory.

    Original Description:

    sssssssssssssssssssssssssssssss

    Original Title

    4-LevelShelving

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the lateral load calculations for a 4-level shelving unit and a 3-level storage rack according to ASCE 7-16 and ASCE 7-10, respectively. Key results include: 1) The base shear for the shelving is 437 lbs and for the rack is 543 lbs. 2) The vertical distribution of forces is calculated to determine the load at each level. 3) Anchor calculations show the shelving anchorage is satisfactory but the rack anchorage is unsatisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    69 views12 pages

    Lateral Loads of 4 Level Shelving, With Hilti Anchorage, Based On ASCE 7-16

    Uploaded by

    kosdsds
    This document summarizes the lateral load calculations for a 4-level shelving unit and a 3-level storage rack according to ASCE 7-16 and ASCE 7-10, respectively. Key results include: 1) The base shear for the shelving is 437 lbs and for the rack is 543 lbs. 2) The vertical distribution of forces is calculated to determine the load at each level. 3) Anchor calculations show the shelving anchorage is satisfactory but the rack anchorage is unsatisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 12

    PROJECT : PAGE :

    CLIENT : DESIGN BY :
    JOB NO. : DATE : REVIEW BY :
    Lateral Loads of 4 Level Shelving, with Hilti Anchorage, Based on ASCE 7-16

    Dimensions
    D= 3.5 ft
    ( 1.1 m)
    L= 9 ft
    ( 2.7 m)
    h4 = 18.5 ft
    ( 5.6 m)

    Determine Shelving Base Shear (Derived from ASCE 7-16 15.5.3 & 13.3)

    1   0.4 a p S DS I pW p  z 
    V F p  Max 0.3S DS I pW p , Min   1  2  , 1.6 S DS I pW p   0.34 Wp, ASD
    1.5   Rp  h  
    = 437.2 lbs,
    (ASD level force at each L Shelving)
    Where SDS = 1.121 (ASCE 7-16 11.5.4)
    Ip = 1.5 (ASCE 7-16 15.3.3.1)
    Wp = W1 + W2 + W3 = 1300.0 lbs, each L shelving
    ap = 2.5 (ASCE 7-16 13.3.1.1)
    Rp = 4 (ASCE 7-16 13.3.1.1)
    z= 0 ft, shelving floor height from building ground (ASCE 7-16 13.3.1.1)
    h= 36 ft, average building roof height (ASCE 7-16 13.3.1.1)
    ( 11.0 m)
    Calculate Vertical Distribution of Shelving Base Shear (lbs) & Allowable Elastic Drift (ASCE 7-16 12.8.3 & 15.5.3)

    Level Wx hx hxk Wxhxk Fx , ASD (12.8-11) d xe,allowable, in, ASD


    4 300 18.5 18.5 5550 206.5 ( 0.69 Wx ) 7.929
    3 300 12.5 12.5 3750 139.5 ( 0.47 Wx ) 5.357
    2 350 6.5 6.5 2275 84.6 ( 0.24 Wx ) 2.786
    1 350 0.5 0.5 175 6.5 ( 0.02 Wx ) 0.214
    1300.0 11750 437.2
    ( 1 ft = 0.305 m , 1 in = 25.4 mm , 1 kips = 4.448 kN , 1 ft-k = 1.356 kN-m)
    Where k= 1 (ASCE 7-16 15.5.3)
    d xe,allowable, ASD = 5% hx/1.4, (ASCE 7-16 15.5.3)
    (cont'd)
    Calculate Lateral Forces (lbs), at Each Joint of Both Directions, and Max Reactions (lbs) (ASCE 7-16 15.5.3)

    Case a, (ASCE 7-16 15.5.3.3.2 a)


    Level ex (ft) Wx F M RT RC RV
    4 3 201 69.2 208
    3 3 201 46.7 140
    2 3 234.5 28.4 85
    1 3 234.5 2.2 7
    871.0 146.5 439.4 986.7 1857.7 146.5

    Case b, (ASCE 7-16 15.5.3.3.2 b)


    Level ex (ft) Wx F M RT RC RV
    4 3 300 50.4 151
    3 0 0.0 0
    2 0 0.0 0
    1 0 0.0 0
    300.0 50.4 151.3 469.8 769.8 50.4

    Anchorage & Summary


    4 - 1/2" f, w/ 2" emb in 2.5 ksi conc, KWIK Bolt-TZ required at each column base. (ICC ESR-1917)
    (W0 Ps / Pt) + (Vs / Vt) = 0.709 < 1.20 [SATISFACTORY]
    Where Ps = 250.0 (RMI 7.1.2), Pt = 730 lbs / bolt, (ICC ESR-1917)
    Vs = 36.6 lbs, Vt = 1500 lbs / bolt, (ICC ESR-1917)
    W0 = 2.0 , ASCE 7-16 15.5.3.1.1
    PROJECT : PAGE :
    CLIENT : DESIGN BY :
    JOB NO. : DATE : REVIEW BY :
    Lateral Loads of Storage Racks, with Red Head Anchorage, Based on ASCE 7-10

    Dimensions
    D= 4 ft
    L= 10 ft
    h3 = 20 ft

    Determine Rack Base Shear (Derived from ASCE 7-10 15.5.3 & 13.3)

    1   0.4a p S DS I pW p  z 
    V F p  Max 0.3S DS I pW p , Min   1  2  , 1.6 S DS I pW p   0.46
    1.5   Rp  h  
    = 542.8
    (ASD level force at each L rac
    Where SDS = 1.173 (ASCE 7-10 11.4.4)
    Ip = 1.5 (ASCE 7-10 15.5.3.1)
    Wp = W1 + W2 + W3 = 1190.0 lbs, each L rack
    ap = 2.5 (ASCE 7-10 15.5.3)
    Rp = 4 (ASCE 7-10 15.5.3)
    z= 20 ft, rack floor height from building ground (ASCE 7-10 13.3.3.1)
    h= 36 ft, average building roof height (ASCE 7-10 13.3.3.1)

    Calculate Vertical Distribution of Rack Base Shear (lbs) & Allowable Elastic Drift (ASCE 7-10 12.8.3 & 15.5.3.3)

    Level Wx hx hxk Wxhxk Fx , ASD (12.8-11) d xe,allowable, in, ASD


    3 1170 20 20.0 23400 540.9 ( 0.46 Wx ) 8.571
    2 10 8 8.0 80 1.8 ( 0.18 Wx ) 3.429
    1 10 0.5 0.5 5 0.1 ( 0.01 Wx ) 0.214
    1190.0 23485 542.8

    Where k= 1 (ASCE 7-10 15.5.3.2)


    d xe,allowable, ASD = 5% hx/1.4, (ASCE 7-10 15.5.3.4)

    Calculate Lateral Forces (lbs), at Each Joint of Both Directions, and Max Reactions (lbs) (ASCE 7-10 15.5.3.2)

    Case a, (ASCE 7-10 15.5.3.2 a)


    Level ex (ft) Wx F M RT RC
    3 3 783.9 181.2 544
    2 3 6.7 0.6 2
    1 3 6.7 0.0 0
    797.3 181.9 545.6 1688.5 2485.8

    Case b, (ASCE 7-10 15.5.3.2 b)


    Level ex (ft) Wx F M RT RC
    3 3 1170 270.4 811
    2 0 0.0 0
    1 0 0.0 0
    1170.0 270.4 811.3 2525.0 3695.0
    Anchorage & Summary
    2 - 1/2" f, w/ 1 7/8" emb in 2.5 ksi conc, ITW Red Head Wedge required at each column base. (ICC ESR-2251
    (Ps / Pt) + (Vs / Vt) = 2.397 > 1.20 [UNSATISFACTORY]
    Where Ps = 1262.5 lbs Pt = 557 lbs / bolt, (ICC ESR-2251)
    Vs = 135.2 lbs, Vt = 1033.5 lbs / bolt, (ICC ESR-2251)
    Notes:
    1. Input W2 & e2 zero for only 2 level rack, or lump some levels together at their top for more than 3 levels.
    2. Rack self should be designed by Manufacturers Institute Specifications (RMI), or from ICC report.
    a. Vertical impact load factor is 1.25 (RMI 2.4)
    b. Max beam deflection is 1/180 (RMI 2.5)
    c. Allowable soil capacity for slab on grade is 500 psf.
    Wp, ASD

    lbs,
    ASD level force at each L rack)

    10 12.8.3 & 15.5.3.3)


    d xe,allowable, in, ASD

    ASCE 7-10 15.5.3.2)

    RV
    181.9

    RV

    270.4
    (cont'd)

    ch column base. (ICC ESR-2251)

    s / bolt, (ICC ESR-2251)


    s / bolt, (ICC ESR-2251)

    op for more than 3 levels.


    or from ICC report.
    PROJECT : PAGE :
    CLIENT : DESIGN BY :
    JOB NO. : DATE : REVIEW BY :
    Lateral Loads of Storage Racks Based on ASCE 7-05

    Determine Rack Base Shear (Derived from ASCE 7-05 15.5.3 & 13.3)

    1   0.4a p S DS I pW p  z 
    V F p  Max  0.3S DS I pW p , Min   1  2  , 1.6 S DS I pW p   0.34
    1.5   Rp  h  
    = 100.9
    (ASD level force at each L ra
    Where SDS = 1.121 (ASCE 7-05 11.4.4)
    Ip = 1.5 (ASCE 7-05 15.5.3.1)
    Wp = W1 + W2 + W3 = 300.0 lbs, each L rack
    ap = 2.5 (ASCE 7-05 15.5.3)
    Rp = 4 (ASCE 7-05 15.5.3)
    z= 0 ft, rack floor height from building ground (ASCE 7-05 13.3.3.1)
    h= 36 ft, average building roof height (ASCE 7-05 13.3.3.1)

    Calculate Vertical Distribution of Rack Base Shear (lbs) & Allowable Elastic Drift (ASCE 7-05 12.8.3 & 15.5.3.3)

    Level Wx hx hxk Wxhxk Fx , ASD (12.8-11) d xe,allowable, in, ASD


    3 300 18.5 18.5 5550 100.9 ( 0.34 Wx ) 7.929
    2 0.01 6.5 6.5 0 0.0 ( 0.12 Wx ) 2.786
    1 0.01 0.5 0.5 0 0.0 ( 0.01 Wx ) 0.214
    300.0 5550 100.9

    Where k= 1 (ASCE 7-05 15.5.3.2)


    d xe,allowable, ASD = 5% hx/1.4, (ASCE 7-05 15.5.3.4)
    Wp, ASD

    lbs,
    ASD level force at each L rack)

    d xe,allowable, in, ASD


    PROJECT : PAGE :
    CLIENT : DESIGN BY :
    JOB NO. : DATE : REVIEW BY :
    Lateral Loads of Storage Racks Based on ASCE 7-05

    Determine Rack Base Shear (Derived from ASCE 7-05 15.5.3 & 13.3)

    1   0.4a p S DS I pW p  z 
    V F p  Max  0.3S DS I pW p , Min   1  2  , 1.6 S DS I pW p   0.46
    1.5   Rp  h  
    = 542.8
    (ASD level force at each L ra
    Where SDS = 1.173 (ASCE 7-05 11.4.4)
    Ip = 1.5 (ASCE 7-05 15.5.3.1)
    Wp = W1 + W2 + W3 = 1190.0 lbs, each L rack
    ap = 2.5 (ASCE 7-05 15.5.3)
    Rp = 4 (ASCE 7-05 15.5.3)
    z= 20 ft, rack floor height from building ground (ASCE 7-05 13.3.3.1)
    h= 36 ft, average building roof height (ASCE 7-05 13.3.3.1)

    Calculate Vertical Distribution of Rack Base Shear (lbs) & Allowable Elastic Drift (ASCE 7-05 12.8.3 & 15.5.3.3)

    Level Wx hx hxk Wxhxk Fx , ASD (12.8-11) d xe,allowable, in, ASD


    3 1170 20 20.0 23400 540.9 ( 0.46 Wx ) 8.571
    2 10 8 8.0 80 1.8 ( 0.18 Wx ) 3.429
    1 10 0.5 0.5 5 0.1 ( 0.01 Wx ) 0.214
    1190.0 23485 542.8

    Where k= 1 (ASCE 7-05 15.5.3.2)


    d xe,allowable, ASD = 5% hx/1.4, (ASCE 7-05 15.5.3.4)
    Wp, ASD

    lbs,
    ASD level force at each L rack)

    d xe,allowable, in, ASD

    You might also like