Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    Fixed Column Base Design: Eneral

    Uploaded by

    amanpreet_ahuja
    This document provides details on the design of a fixed column base connection according to Eurocode standards. Key details include the column and base plate dimensions and materials, anchor bolt arrangement and properties, and loads applied. Analysis is shown for compression resistance of the concrete, bearing capacity of the anchor bolts, and shear checks for the connection. All capacity checks show the connection design is verified against the loads applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fixed Column Base Design: Eneral

    Uploaded by

    amanpreet_ahuja
    83 views5 pages
    This document provides details on the design of a fixed column base connection according to Eurocode standards. Key details include the column and base plate dimensions and materials, anchor bolt arrangement and properties, and loads applied. Analysis is shown for compression resistance of the concrete, bearing capacity of the anchor bolts, and shear checks for the connection. All capacity checks show the connection design is verified against the loads applied.

    Original Description:

    base plate design for azial

    Original Title

    Baseplate comp

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details on the design of a fixed column base connection according to Eurocode standards. Key details include the column and base plate dimensions and materials, anchor bolt arrangement and properties, and loads applied. Analysis is shown for compression resistance of the concrete, bearing capacity of the anchor bolts, and shear checks for the connection. All capacity checks show the connection design is verified against the loads applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views5 pages

    Fixed Column Base Design: Eneral

    Uploaded by

    amanpreet_ahuja
    This document provides details on the design of a fixed column base connection according to Eurocode standards. Key details include the column and base plate dimensions and materials, anchor bolt arrangement and properties, and loads applied. Analysis is shown for compression resistance of the concrete, bearing capacity of the anchor bolts, and shear checks for the connection. All capacity checks show the connection design is verified against the loads applied.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    Page 1 of 5

    Autodesk Robot Structural Analysis Professional 2015

    Fixed column base design


    Eurocode 3: EN 1993-1-8:2005/AC:2009 + CEB Design Guide:
    Ratio
    Design of fastenings in concrete 0.71

    GENERAL
    Connection no.: 2
    Connection name: Fixed column base

    GEOMETRY
    COLUMN
    Section: SHSH 250x250x12.5
    Lc = 4.00 [m] Column length
    = 0.0 [Deg] Inclination angle
    hc = 250 [mm] Height of column section
    bfc = 250 [mm] Width of column section
    twc = 13 [mm] Thickness of the web of column section
    tfc = 13 [mm] Thickness of the flange of column section
    rc = 13 [mm] Radius of column section fillet
    Ac = 11700 [mm2] Cross-sectional area of a column
    Iyc = 109150000 [mm4] Moment of inertia of the column section
    Material: S355
    fyc = 355.00 [MPa] Resistance
    fuc = 490.00 [MPa] Yield strength of a material

    COLUMN BASE
    lpd = 500 [mm] Length
    bpd = 500 [mm] Width

    mhtml:file://C:\Users\Monica.rodriguez\Documents\Autodesk\Output\ra_res.mht 26/11/2015
    Page 2 of 5

    tpd = 25 [mm] Thickness


    Material: S355
    fypd = 355.00 [MPa] Resistance
    fupd = 490.00 [MPa] Yield strength of a material

    ANCHORAGE
    The shear plane passes through the UNTHREADED portion of the bolt.
    Class = 8.8 Anchor class
    fyb = 640.00 [MPa] Yield strength of the anchor material
    fub = 800.00 [MPa] Tensile strength of the anchor material
    d= 30 [mm] Bolt diameter
    As = 561 [mm2] Effective section area of a bolt
    Av = 707 [mm2] Area of bolt section
    nH = 4 Number of bolt columns
    nV = 4 Number of bolt rows
    Horizontal spacing eHi = 130;130 [mm]
    Vertical spacing eVi = 130;130 [mm]

    Anchor dimensions
    L1 = 50 [mm]
    L2 = 600 [mm]
    L3 = 50 [mm]

    Anchor plate
    lp = 130 [mm] Length
    bp = 130 [mm] Width
    tp = 10 [mm] Thickness
    Material: S355
    fy = 355.00 [MPa] Resistance

    Washer
    lwd = 60 [mm] Length
    bwd = 60 [mm] Width
    twd = 8 [mm] Thickness

    MATERIAL FACTORS
    M0
    = 1.00 Partial safety factor
    M2 = 1.25 Partial safety factor
    C = 1.50 Partial safety factor

    SPREAD FOOTING
    L= 900 [mm] Spread footing length
    B= 1200 [mm] Spread footing width
    H= 1200 [mm] Spread footing height

    Concrete
    Class C40
    fck = 40.00 [MPa] Characteristic resistance for compression

    Grout layer
    tg = 25 [mm] Thickness of leveling layer (grout)
    fck,g = 40.00 [MPa] Characteristic resistance for compression
    Cf,d = 0.20 Coeff. of friction between the base plate and concrete

    mhtml:file://C:\Users\Monica.rodriguez\Documents\Autodesk\Output\ra_res.mht 26/11/2015
    Page 3 of 5

    WELDS
    ap = 8 [mm] Footing plate of the column base

    LOADS
    Case: Manual calculations.

    Nj,Ed = -1200.00 [kN] Axial force


    Vj,Ed,y = 550.00 [kN] Shear force
    Vj,Ed,z = 580.00 [kN] Shear force

    RESULTS

    COMPRESSION ZONE
    COMPRESSION OF CONCRETE
    fcd = 26.67 [MPa] Design compressive resistance EN 1992-1:[3.1.6.(1)]
    fj = 36.95 [MPa] Design bearing resistance under the base plate [6.2.5.(7)]
    c = tp (fyp/(3*fj* M0))
    c= 45 [mm] Additional width of the bearing pressure zone [6.2.5.(4)]
    beff = 102 [mm] Effective width of the bearing pressure zone under the flange [6.2.5.(3)]
    leff = 339 [mm] Effective length of the bearing pressure zone under the flange [6.2.5.(3)]
    Ac0 = 34619 [mm2]
    Area of the joint between the base plate and the foundation EN 1992-1:[6.7.(3)]
    Ac1 = 311572 [mm2] Maximum design area of load distribution EN 1992-1:[6.7.(3)]
    Frdu = Ac0*fcd* (Ac1/Ac0) ≤ 3*Ac0*fcd
    Frdu = 2769.53 [kN] Bearing resistance of concrete EN 1992-1:[6.7.(3)]

    j
    = 0.67 Reduction factor for compression [6.2.5.(7)]
    fjd = j*Frdu/(beff*leff)
    fjd = 53.33 [MPa] Design bearing resistance [6.2.5.(7)]

    Ac,n = 96879 [mm2] Bearing area for compression [6.2.8.2.(1)]


    Fc,Rd,i = AC,i*fjd
    Fc,Rd,n = 5166.86 [kN] Bearing resistance of concrete for compression [6.2.8.2.(1)]

    RESISTANCES OF SPREAD FOOTING IN THE COMPRESSION ZONE


    Nj,Rd = Fc,Rd,n
    Nj,Rd = 5166.86 [kN] Resistance of a spread footing for axial compression [6.2.8.2.(1)]

    CONNECTION CAPACITY CHECK


    Nj,Ed / Nj,Rd ≤ 1,0 (6.24) 0.23 < 1.00 verified (0.23)

    SHEAR
    BEARING PRESSURE OF AN ANCHOR BOLT ONTO THE BASE PLATE
    Shear force Vj,Ed,y

    d,y = 0.57 Coeff. taking account of the bolt position - in the direction of shear [Table 3.4]
    b,y = 0.57 Coeff. for resistance calculation F1,vb,Rd [Table 3.4]

    mhtml:file://C:\Users\Monica.rodriguez\Documents\Autodesk\Output\ra_res.mht 26/11/2015
    Page 4 of 5

    k1,y = 2.50 Coeff. taking account of the bolt position - perpendicularly to the direction of shear [Table 3.4]
    F1,vb,Rd,y = k1,y* b,y*fup*d*tp / M2
    F1,vb,Rd,y = 421.09 [kN] Resistance of an anchor bolt for bearing pressure onto the base plate [6.2.2.(7)]

    Shear force Vj,Ed,z

    d,z
    = 0.57 Coeff. taking account of the bolt position - in the direction of shear [Table 3.4]
    =
    b,z 0.57
    Coeff. for resistance calculation F1,vb,Rd [Table 3.4]
    k1,z = 2.50 Coeff. taking account of the bolt position - perpendicularly to the direction of shear [Table 3.4]
    F1,vb,Rd,z = k1,z* b,z*fup*d*tp / M2
    F1,vb,Rd,z = 421.09 [kN] Resistance of an anchor bolt for bearing pressure onto the base plate [6.2.2.(7)]

    SHEAR OF AN ANCHOR BOLT


    b= 0.25 Coeff. for resistance calculation F2,vb,Rd [6.2.2.(7)]
    Avb = 707 2 Area of bolt section [6.2.2.(7)]
    [mm ]
    fub = 800.00 [MPa] Tensile strength of the anchor material [6.2.2.(7)]
    M2
    = 1.25 Partial safety factor [6.2.2.(7)]
    F2,vb,Rd = b*fub*Avb/ M2
    F2,vb,Rd = 112.19 [kN] Shear resistance of a bolt - without lever arm [6.2.2.(7)]

    SPLITTING RESISTANCE
    Cf,d = 0.20 Coeff. of friction between the base plate and concrete [6.2.2.(6)]
    Nc,Ed = 1200.00 [kN] Compressive force [6.2.2.(6)]
    Ff,Rd = Cf,d*Nc,Ed
    Ff,Rd = 240.00 [kN] Slip resistance [6.2.2.(6)]

    SHEAR CHECK

    Vj,Rd,y = nb*min(F1,vb,Rd,y, F2,vb,Rd) + Ff,Rd


    Vj,Rd,y = 1586.31 [kN] Connection resistance for shear CEB [9.3.1]
    Vj,Ed,y / Vj,Rd,y ≤ 1,0 0.35 < 1.00 verified (0.35)

    Vj,Rd,z = nb*min(F1,vb,Rd,z, F2,vb,Rd) + Ff,Rd


    Vj,Rd,z = 1586.31 [kN] Connection resistance for shear CEB [9.3.1]
    Vj,Ed,z / Vj,Rd,z ≤ 1,0 0.37 < 1.00 verified (0.37)

    Vj,Ed,y / Vj,Rd,y + Vj,Ed,z / Vj,Rd,z ≤ 1,0 0.71 < 1.00 verified (0.71)

    WELDS BETWEEN THE COLUMN AND THE BASE PLATE


    = 79.55 [MPa] Normal stress in a weld [4.5.3.(7)]
    = 79.55 [MPa] Perpendicular tangent stress [4.5.3.(7)]
    = 137.50 [MPa] Tangent stress parallel to Vj,Ed,y [4.5.3.(7)]
    yII

    zII = 145.00 [MPa] Tangent stress parallel to Vj,Ed,z [4.5.3.(7)]


    W= 0.90 Resistance-dependent coefficient [4.5.3.(7)]
    / (0.9*fu/ M2)) ≤ 1.0 (4.1) 0.23 < 1.00 verified (0.23)
    2
    ( + 3.0 ( yII2 + 2
    )) / (fu/( W* M2))) ≤ 1.0 (4.1) 0.66 < 1.00 verified (0.66)
    2
    ( + 3.0 ( zII2 + 2
    )) / (fu/( W* M2))) ≤ 1.0 (4.1) 0.68 < 1.00 verified (0.68)

    WEAKEST COMPONENT:
    ANCHOR BOLT - SHEAR - WITH LEVER ARM

    mhtml:file://C:\Users\Monica.rodriguez\Documents\Autodesk\Output\ra_res.mht 26/11/2015
    Page 5 of 5

    Connection conforms to the code Ratio 0.71

    mhtml:file://C:\Users\Monica.rodriguez\Documents\Autodesk\Output\ra_res.mht 26/11/2015

    You might also like