MATERIAL SAFETY DATA SHEET

NITRONAL EPOXY FLOOR SL MINT GREEN

Description : 20%

Product Detils
Product Name : NITRONAL EPOXY FLOOR SL MINT GREEN
Trade Name : NITRONAL EPOXY FLOOR SL MINT GREEN
Manufacturers Code : 01
Chemical family : Epoxy Polyamine

Company Identification
Head Office : PT. SINAR NIRWANA INDONESIA
Address : JL.TEUKU UMAR NO. 8-9 CIBITUNG - BEKASI 17520
Telephone Number : (021) 88339432 ; fax : (021) 88322245

Contact Point
Prepared by: PT. SNI
CUSTOMER :
Description : 20%

Chemical Name CAS No Proportion Exposure limit

Epoxy resin 80-85% -

Extender 20-25% -
Pigment Pastes - 10-15% -
additive - 1-5% -

NITRONAL EPOXY FLOOR SL MINT GREEN

Description : 20%

Appearance : Solid Green Liquid Evaporation Rate : Not Known

Ordeor : Characteristic Vapor Denisty : Not Known
Solubility in water : Nil Spesific Gravity : 1.40-1.60 Kg / L
Boiling Point : Not Known Flash Point : 40o C
Melting Point : Not Applicable Auto-igntion Temp : Not Available
Vapor Preasure : Not Available Exposure Limits : % Volume

Description : 20% Other Properties : not available

Description : 20% Flammable Harmful by inhalation, in contact with the skin or eyes or if swallowed.
General : If you feel unwell, seek medical advice – take a copy of the label or product
safety data sheet with you if possible.
Ingestion : If poisoning occurs contact Doctor or Poisons Information Center. Rinse out
mouth with water, give a plenty of drinking water. If swallowed, do not induce vomiting.
If vomiting does occur, place patient’s face downward at low level to prevent vomit
entering lungs.
Eye Contact : Check for and remove any contact lenses. Immediately flush eyes with running
water for 15 minutes keeping eyelids open. Seek medical attention.
Skin Contact: Remove Contaminated clothing and launder before reuse. Wash skin thoroughly
and gently with mild soap and running water. Get medical attention if redness or irritation
occurs.
Inhalations: Remove affected person from contaminated area as soon as possible. If not
breathing, apply mouth-to-mouth resuscitation. Allow victim to rest in a well-
ventilated area. Seek medical advice.
Notes to Physician : Treat symptomatically. Contact a poison information center.
First Aid Facilities : Access to eyewash is advise

Description : 20%

Extinguishing Media : Do not use water. Use sand, foam, carbon dioxide, or dry powder extinguishers.

Fire Fighting Instruction: Use fine water spray to cool surrounding areas and to prevent vapor pressure
build up. Wear suitable clothing including boots, overalls, gloves, and face shield.
Special breathing apparatus may be required. Avoid flushing spilled material into
sewers or drains.
Special hazards : Beware of static build up. Do not cut, weld, heat or drill empty containers.

Description : 20%
Leak / Spill : Combustible liquid. Eliminate all sources of ignition. Wear full protective
equipment. for recovery or disposal. Contain spill with inert material
(sand, diatomaceous earth) and transfer liquid and solid separately to
containersDispose of according to local regulations, do not allow liquid
Description : 20%
Handling : Avoid smoking. Take precautions against static discharge
(earth straps advised). Avoid inhalation of vapors and contact with the
skin and eyes. Observe good industrial handling practices.
Storage : Keep container closed when not in use. Do not store
near naked flame or sparks. Store at temperature less
than 35ºC. Even empty container can be explosive.
Store in a well ventilated dry area, away from oxidizing materials.
Description : 20%
Engineering : Avoid inhalation of vapor by maintaining adequate ventilation
Measures to ensure that air concentrations are maintained below the
exposure limit. This is normally achieved by spraying at a
well-exhausted spray booth. Flammable. Avoid heat, sparks,
flame and contact with oxidizing or oxidizing agents. Equipment
should be earthed. Spray booth should be kept clean.
Personal : Avoid contact with skin and eye, and avoid breathing the vapor
Protection or spray mist. Wear suitable protective clothing including rubber
or PVC glove and industrial safety goggles. An organic vapor
cartridge respirator should be worn if the concentration of vapors
is likely to exceed the recommended limits in such operations
such as spraying.

Description : 20%

Decomposition : No decomposition if use and store according to specification

Products
Hazardous : Not known
Polymerization
Description : 20%
General : No adverse health effects are expected if the product is handled
according to this chemical safety data sheet and the product
label. Symptoms that may arise if the product is mishandled are:
Toxicity data : None established

Carcinogenicity : Not estabished

Reproductive : Not established
Effect
Effects : Prolonged exposure to the vapor may cause nausea, vomiting Acute
Over-exposure
Swallowed : Harmful if swallowed. Tend to break up into foam it the patient vomit.
Upon aspiration into the lungs, chemical pneumonia may develop.
Eye : Irritating to the eyes.

Description : 20%

Skin : Irritating to the skin. Has degreasing action on the skin and may cause
redness or dermatitis.
Inhaled : Harmful by inhalation. Irritating to mucous membranes and
respiratory tract.May cause dizziness, drowsiness and .
un-consciousness
Chronic : Damage to the central nervous system, kidneys, liver,
Effects brain function.
Target : Respiratory system lungs, central nervous system, kidneys,
Organs liver, eyes, and skin.
Medical : Generally Cardiovascular disorders, asthma, heavy smoking
Conditions or heavy drinking.
Description : 20%
Aquatic : Hazardous of water (Self assessment)
Toxicity Do not allow product to reach ground water, water bodies or sewage
system.
Description : 20%

Disposal of waste to be in accordance with Environmental Quality (Schedule Wastes) Regulation

1989 and other guidelines issued by DOE and / or other local authorities.

Description : 20%

UN NO : 1236 Name : PAINT - FLAMMABLE LIQUID

TDG Class : 3 Sub risk : 3.3
Haz-Chem Code : 3Y Packaging Group : III

Description : 20%
Risk Phrases : R 10 Flammable
R 20/21 Harmful by inhalation and in contact with skin
R 38 Irritating to skin

Safety Phrases : S 16 Keep away from sources of ignition. No smoking

S 25 Avoid contact with eyes
S 29 Do not empty into drains
 Description : 20%
This information is furnished without warranty, representation, inducement or license of any kind, using any product,
read its label. expected that it is accurate to the best of ……………..knowledge, or obtained from sources believed
by……………..to be accurate, and……………..does not assume any legal responsibility for use or reliance upon
same. Customers are encouraged to conduct their own test. Before using any product, read its label.

MATERIAL SAFETY DATA SHEET

NITRONAL HARDENER EPOXY FLOOR SL
Description : 20%

Product Details
Product Name: : NITRONAL HARDENER EPOXY
Trade Name : NITRONAL HARDENER EPOXY
Manufacturers Code : 02
Chemical family : Epoxy Polyamide

Company Identification
Head Office : PT. SINAR NIRWANA INDONESIA
Address : JL.TEUKU UMAR NO. 8-9 CIBITUNG - BEKASI 17520
Telephone Number : (021) 88339432 ; fax : (021) 88322245

Contact Point
Prepared by: PT. SNI
CUSTOMER :
Description : 20%

Chemical Name CAS No Proportion Exposure limit

Epoxy hardener - 90-95% -
Accelerator - 10-15% -

Appearance : Reddish Brown Evaporation Rate : Not known

Liquid
Ordeor : Characteristic Vapor Denisty : Not known
Solubility in water : not applicable Spesific Gravity : 1.0-1.10 Kg / L
Boiling Point : not applicable Flash Point : 29ºC
Melting Point : not applicable Auto-igntion Temp : Not available
Vapor Preasure : not applicable Exposure Limits :

Description : 20% Flammable Harmful by inhalation, in contact with the skin or eyes or if swallowed.
General : If you feel unwell, seek medical advice – take a copy of the label or product safety data
sheet with you if possible.
Ingestion : If poisoning occurs contact Doctor or Poisons Information Center. Rinse out mouth with
water, give a plenty of drinking water. If swallowed, do not induce vomiting. If vomiting does
occur, place patient’s face downward at low level to prevent vomits entering lungs.
Eye Contact : Check for and remove any contact lenses. Immediately flush eyes with running water for
15 minutes keeping eyelids open. Seek medical attention.
Skin Contact : Remove Contaminated clothing and launder before reuse. Wash skin thoroughly and gently
with mild soap and running water. Get medical attention if redness or irritation occurs.
Inhalations : Remove affected person from contaminated area as soon as possible. If not breathing,
apply mouth-to-mouth resuscitation. Allow victim to rest in a well-ventilated area. Seek
medical advice.
Notes to Physician : Treat symptomatically. Contact a poison information center.
First Aid Facilities : Access to eyewash is advised

Description : 20%
Extinguishing Media : Do not use water. Use sand, foam, carbon dioxide, or dry powder extinguishers.

Fire Fighting Instruction: Use fine water spray to cool surrounding areas and to prevent vapor pressure
build up. Wear suitable clothing including boots, overalls, gloves, and face shield.
Special breathing apparatus may be required. Avoid flushing spilled material into
sewers or drains.
Special hazards : Beware of static build up. Do not cut, weld, heat or drill empty containers.

NITRONAL HARDENER EPOXY FLOOR SL

Description : 20%
Leak / Spill : Combustible liquid. Eliminate all sources of ignition. Wear full protective equipment. Contain
spill with inert material (sand, diatomaceous earth) and transfer liquid and solid separately
to containers for recovery or disposal.

Description : 20%
Handling : Avoid smoking. Take precautions against static discharge (earth straps
advised). Avoid inhalation of vapors and contact with the skin and eyes.
Observe good industrial handling practices.
Storage : Keep container closed when not in use. Do not store near naked flame
or sparks. Store at temperature less than 35ºC. Even empty container
can be explosive. Store in a well ventilated dry area, away from oxidizing
materials.
Description : 20%
Engineering : Avoid inhalation of vapor by maintaining adequate ventilation
Measures to ensure that air concentrations are maintained below the
exposure limit. This is normally achieved by spraying at a
well-exhausted spray booth. Flammable. Avoid heat, sparks,
flame and contact with oxidizing or oxidizing agents. Equipment
should be earthed. Spray booth should be kept clean.
Personal : Avoid contact with skin and eye, and avoid breathing the vapor
Protection or spray mist. Wear suitable protective clothing including rubber
or PVC glove and industrial safety goggles. An organic vapor
cartridge respirator should be worn if the concentration of vapors
is likely to exceed the recommended limits in such operations
such as spraying.
Description : 20%
Decomposition : No decomposition if use and store according to specification
Products
Hazardous : Not known
Polymerization
Description : 20%
General : No adverse health effects are expected if the product is handled
according to this chemical safety data sheet and the product
label. Symptoms that may arise if the product is mishandled are:
Toxicity data : None established

Carcinogenicity : Not estabished

Reproductive : Not established
Effect
 Effects : Prolonged exposure to the vapor may cause nausea, vomiting Acute
Over-exposure
Swallowed : Harmful if swallowed. Tend to break up into foam it the patient vomit.
Upon aspiration into the lungs, chemical pneumonia may develop.
Eye : Irritating to the eyes.

Description : 20%
Skin : Irritating to the skin. Has degreasing action on the skin and may cause
redness or dermatitis.
Inhaled : Harmful by inhalation. Irritating to mucous membranes and
respiratory tract.May cause dizziness, drowsiness and .
un-consciousness
Chronic : Damage to the central nervous system, kidneys, liver,
Effects brain function.
Target : Respiratory system lungs, central nervous system, kidneys,
Organs liver, eyes, and skin.
Medical : Generally Cardiovascular disorders, asthma, heavy smoking
Conditions or heavy drinking.
Description : 20%
Aquatic : Hazardous of water (Self assessment)
Toxicity Do not allow product to reach ground water, water bodies or sewage
system.
Description : 20%
Disposal of waste to be in accordance with Environmental Quality (Schedule Wastes) Regulation 1989 and other
guidelines issued by DOE and / or other local authorities.
Description : 20%
UN NO : 1236 Name : PAINT - FLAMMABLE LIQUID
TDG Class : 3 Sub risk : 3.3
Haz-Chem Code : 3Y Packaging Group : III
Description : 20%
Risk Phrases : R 10 Flammable
R 20/21 Harmful by inhalation and in contact with skin
R 38 Irritating to skin

Safety Phrases : S 16 Keep away from sources of ignition. No smoking

S 25 Avoid contact with eyes
S 29 Do not empty into drains
Description : 20%
This information is furnished without warranty, representation, inducement or license of any kind, using any product,
read its label. expected that it is accurate to the best of ……………..knowledge, or obtained from sources believed
by……………..to be accurate, and……………..does not assume any legal responsibility for use or reliance upon
same. Customers are encouraged to conduct their own test. Before using any product, read its label.