Boq Ace

GRAND SUMMARY
1 Description AMOUNT
A Annexure - A (Civil & Interior) Rs. 14,652,804.00
B Annexure - B (Modular & Chairs) Rs. 2,017,480.00
C Annexure - C (Carpet flooring ) Rs. 650,250.00
D Annexure - D ( Soft sitting ) Rs. 701,600.00
E Annexure - E (Electrical work) Rs. 5,174,790.00
F Annexure - F (HVAC work) Rs. 3,257,777.50
G Annexure - G (Plumbing & Fire fighting work) Rs. 500,360.00
H Annexure - H (Networking) Rs. 1,405,340.00
Total Rs. 28,360,402.00
Less Discount Supervisory/staff expesess atsite Rs. 500,000.00
a Total After Discount Rs. 27,860,402.00
Less Work Already done:

1. Civil Work value 685,803.00
2. Interior, Gypsam partition work value 75,000.00
3. Electrical work value 700,000.00
4. A.C.Work Value 1,896,000.00
b Total Work Rs. 3,356,803.00
Total Before Taxes & Duties (a-b) Rs. 24,503,599.00
Add: VAT @ 12.5% Rs. 2,450,360.00

Add: Service Tax @ 14% Rs. 686,100.00
Grand Total After Taxes & Duties Rs. 27,640,059.00

(Rupees Two Crore Seventy sex lacs forty Thousand and Fifty nine Only)
Terms: (All work would be started at the same time)

1.0 30% of the total cost is be given with the work order.
2.0 30% on basic Structure, civil work,Partition.
3.0 20% on complete structure, paint,ceiling,etc.
4.0 10% at loose furniture supply, floring.
5.0 10% after the final finish to the last detail.
6.0 The above cost does not include any taxes or levies what so ever.
7.0 The total project shall take 150 days to complete, after the design has been finalized, advance payment with PO.
IF time of project delay/stop by you rate will increase as per time of start work.
8.0 Sales tax, service tax all applicable
9.0 Transportation will be extra as actual
10.0 The Client would provied free water electricity and place to stay for the workers
11.0 The client would be provied squre folding
12.0 Addvane to be name of (Ms/ FROMA DESIGN STUDIO)
13.0 A stipulated time shall be given for the execution of the work, but shall depend on the availability of the material
force major clause and the reciprocation from the client in terms of payment schedule and attitude of
trust till the project is completed.
14.0 We would work on turnkey basis and our quotation would also include the charges for consultancy,
designing and supervision apart from all material and labor, till the project is finally completed.
15.0 The extent of our work involves providing you with architectural outline, Interior design, furniture and cabinetry details,
procuring all the material, employing the labor, getting work executed by
them, designing and executionof the electrical, selection and procuring of the electrical fixtures for thematic use,
and all other items and services that have been quoted for. Our scope would
include all details of the proposed area till the final finish of the project to the client’s and our satisfaction.
16.0 Price will increase of materail quality change, design change, or extra items.
ALL DISPUTES SUBJECTS TO NEW DELHI JURISDINCTION

Kindly sign a copy of this terms and scope of work as token of agreement and sonsent for our estimate and quoted amount.
For, Forma Design Studio for…………………………………..
Wasim Raza
9818718504
C & I - SUMMARY
S. No. DESCRIPTION AMOUNT
A CIVIL AND WET WORKS
A-1 DISMANTLING Rs. 51,170.00
A-2 MASONARY & PLASTER Rs. 1,099,050.00
A-3 FLOORING AND WALL CLADDING Rs. 2,282,827.50
B DRY WORKS
B-1 PARTITIONS AND WALL CLADDING Rs. 3,829,845.00
B-2 CEILING Rs. 1,162,775.00
B-3 DOORS Rs. 970,020.00
C LOOSE FURNITURE:- Rs. 2,378,361.50
D FEATURE WALLS:- Rs. 781,355.00
E FINISHES:- Rs. 477,075.00
F SIGNAGES:- Rs. 478,020.00
G MISCELLANEOUS Rs. 322,525.00
H TOILET WORKS Rs. 819,780.00
GRAND TOTAL Rs. 14,652,804.00

SCHEDULE OF QUANTITIES FOR CIVIL& INTERIOR WORK
S.No DESCRIPTION MAKE UNIT QTY RATE AMOUNT REMARKS
A CIVIL & WET WORKS
A-1 Dismantling
1 DISMANTLING OF GRANITE FLOOR :- Dismantling of existing Granite
flooring and skirting including removing base in cement mortar of any
depth etc. and disposal of unserviceable material to the closest SQM 90.00 70.00 6,300.00
dumping ground.
2 DISMANTLING OF RAISED FLOOR :- Dismantling 300mm high of

existing flooring of toilet including removing base in cement mortar of
any depth etc. and disposal of unserviceable material to the closest SQM 20.00 85.00 1,700.00
dumping ground.
3 DISMANTLING OF BRICK WORK :- Dismantling of brick wall of all

thickness in cement mortar, including glazed tiles, cement plaster and SQM 345.00 65.00 22,425.00
disposal of unserviceable material as directed.
4 DISMANTLING OF CEILING WORK :- Dismantling of existing gypsum
board and grid false ceiling including disposal of unserviceable SQM 77.00 35.00 2,695.00
material as directed.
5 DISMANTLING OF SERVICE WORK :- Dismantling of existing Lihting,
smoke dedactor, HVAC grill, fire fighting and disposal of unserviceable Lot 1.00 14,250.00 14,250.00
material as directed.
6 Removing of toilet fixture, CP fitting, Glass door, wooden door, fire door
and disposal of unserviceable material as directed. Lot 1.00 3,800.00 3,800.00
Sub Total of Civil & Wet Works 51,170.00 -
A-2 MASONARY AND PLASTER

1 HALF BRICK WALL :- Providing and laying half brick partition wall with
well burnt good quality of first class designation 75 in cement mortar
1:4(1cement: 4 coarse sand) including providing 2 Nos of 6mm dia MS
round bars at every IV th course and racking out the joints, scaffolding SQM 185 560.00 103,600.00
including curing etc. complete. Location : Toilet & Cafe
2 CEMENT PLASTER :- Providing and laying 12 to 15mm thick cement

plaster of mix 1:4:2( 1cement:4 fine sand: 2 coarse sand) to all type of
RCC work in line , level and plumb including smooth cement finish as
directed including providing necessary bands, drip and wiremesh
where as required including scaffolding, curing etc. complete. Location : SQM 425 200.00 85,000.00
Toilet & Cafe
3 RCC LINTEL : Providing and laying 100 x 150mm RCC lintel for Toilet
door opening. Rmt 12 1,375.00 16,500.00
4 CEMENT CONCRETE SCREEDING :- Providing and laying 100mm thick

average IPS(Indian Patent Stone) for flooring using cement concrete
1:2:4(1cement:2coarase sand:4 graded stone aggregate20mm and
down gauge) with neat cement coat for floor bands and other similar
locations at all heights & levels etc. complete with Mechanical trovel SQM 590 1,130.00 666,700.00
finish. Location : All office area
5 CEMENT CONCRETE SCREEDING :- Providing and laying 60mm thick
average IPS(Indian Patent Stone) for flooring using cement concrete
1:2:4(1cement:2coarase sand:4 graded stone aggregate20mm and
down gauge) with neat cement coat for floor bands and other similar
locations at all heights & levels etc. complete with Mechanical trovel SQM 225 760.00 171,000.00
finish. Location : All office area
6 POP Punning : Providing and fixing Average 8mm to 12mm thick POP Sakarni /
Punning over cement plaster in true line & plumb finished smooth to Super fine SQM 450 125.00 56,250.00
receive paint.
Sub Total of MASONARY AND PLASTER 1,099,050.00 -
A-3 FLOORING AND WALL CLADDING

1 VITRIFIED TILE FLOORING :- Providing and laying mirror polished
600x600 mm vitrified floor tiles laid over adequate thickness of cement
mortar 1:4(1cement:4carse sand) using chemical grouting aquamix/
laticrete grout 4mm and protection of floor with polethene sheet and
covering with P.O.P minimum thickness 20 mm. (BASIC RATE OF TILES
Rs. 750 / sqmt.) (Location : Pantry , Cafe), SIZE :- 600X600 , VITRIFIED SQM 47 1,825.00 85,775.00
TILE -AS/APP. SAMPLE,
2 ITALIAN STONE FLOORING :-Providing and laying Italian Stone Flooring

as per design laid over adequate thickness of cement mortar
1:4(1cement: 4 coarse sand) mix ,cement slurry, matching pigment ,
marble shall be Diamond Polished as approved by the Architect.(Basic
Cost of Stone = Rs. 3500 per sqmt.)(Location -Reception & director
area )
a Type - 1 ( Fiorito Bottochino ) SQM 192 6,840.00 1,313,280.00

b Type - 2 ( Grey William ) SQM 35 6,935.00 242,725.00
c Type - 3 ( Dark Emperador ) 75mm wide for Inlay RMT 140 950.00 133,000.00
3 VINYL FLOORING:-Providing and fixing 4mm thick 600x600 PVC vinyl Armstrong/LG
flooring of approved shade and quality with adhesive as per
manufacturers recommendation and specification etc. Complete cost
of levelling to be included in the quoted rate.(LG floor or as approved SQM 4.5 1,225.00 5,512.50
with a base price of Rs 65 per sqft.) (Location : Safe room )
4 HARDWOOD FLOORING :Providing and laying Hard Wood Floor as per Armstrong/
approved shade, in flooring laid to patterns , complete as per detailed Pergo/ Tarkett
drawings. Basic cost - Rs.250 /-sqft including all accessories like edge
profile . (Location : Cabin, Reception & Director cabin SQM 87 2,850.00 247,950.00
5 ANTISTATIC RAISED FLOOR - Uniflor ® USF 800 Access Floor panel of

size 600 x 600 mm shall be all steel welded construction, with an
enclosed bottom pan of 64 hemispherical and top plain sheet which
are fuse welded at 144 locations to form a panel of an overall depth of
37 mm. The panel after cleaning, degreasing, phosphating by 11 tank
process is coated with 40 - 60 micron epoxy coat and is heated to
achieve maximum adhesion to the panel surface and corrosion
resistance. The inner empty core of the panel is injected with a light
weight fire retardant, non combustible cementitious compound at high
pressure to fill in all the crevices of the panel and ensures support of
not less than 90% of the top surface area of the panel. The panel is
then laminated with 1.5/2.00 mm thick fire retardant floor grade
Antistatic Laminate / ESD Laminate - PVC / Conductive PVC on a semi
-automated lamination line to ensure maximum bonding to the steel SQM 14 3,800.00 53,200.00
surface. The edges of the laminated are protected with black
Conductive PVC edge trim 5mm wide on all sides. This edge trim is
mechanically locked and sealed in place to avoid detachment. (Location
: Server & UPS ROOM )
6 WOODEN RAISED FLOOR : 100mm high wooden raised floor with

wooden frame, 12mm thick com. Ply and wooden profile on all SQM 25 4,560.00 114,000.00
exposed edges. Location : Director cabin & Reception
7 TRANSITION PROFILE:- P/F transition profile of SS T-section 6mm thk

between two different flooring materials. Complete as per detailed RMT 25 235.00 5,875.00
Drawing.
8 ITALIAN MARBLE SKIRTING :- Providing and fixing 75mm high Italian

marble stone skirting. .(Basic Cost of Stone = Rs. 3500 per sqmt.) RMT 105 570.00 59,850.00
(Location - Reception and director area )
9 WOODEN SKIRTING :- Providing and fixing 75mm wooden skirting as
per wooden flooring. .(Basic Cost of wooden flooring Rs. 1500 per RMT 45 380.00 17,100.00
sqmt.)(Location - Director area cabins )
10 PEBBLES - Providing and laying pre-polished pebbles. SQM 8 570.00 4,560.00
Sub Total of FLOORING AND WALL CLADDING 2,282,827.50
B. DRY WORKS
B-1 PARTITIONS AND WALL CLADDING
1 FULL HEIGHT GYPSUM PARTITION (100MM THICK) :- GYPSUM BOARD Saint Gobain
PARTITION-P/F 100mm thick gypsum board partitions ,consisting Two India gypsum /
layer of tapered edge 12.5mm thick,1200mm wide gypsum plaster Lafarge
board (conforming to IS 2095 - 1982) on both sides of GI stud, Gypsum
screws fixed with dry wall screws of 25mm at 300 mm centres with
joints scattered, 48mm metal studs to be (0.5 mm thk. having one
knurled flange of 34 mm and with joints scattered and another
knurled flange of 36mm fabricated from G.I. sheets) placed in 50mm
floor and ceiling channels @ 600 mm centres, floor channel fixed to
concrete soleplate, and ceiling channel fixed to concrete soffit by
nylon raw/ plugs @600 mm c/c, p/fixing of edge beads, corner SQM 335 1,140.00 381,900.00
protection angle bead, p/f kail wood frames for door frame / storages /
cutting for electrical boxes etc. complete.
2 Intact Crystal
INTACT CRYSTAL (Single Glass) PARTITIONS: Providing 38 x 38mm size

fully relocatable & demountable single glazed partitions The basic
ceiling, floor & wall starter tracks to be made out of mill finished
aluminum pre-equipped with non-glued acoustic seal of minimum
3mm thickness. The overall profile thickness not to exceed 38mm x
38mm. The floor track to have special groove to slide fishplates for SQM 135 3,325.00 448,875.00
alignment purposes. Provided with an acoustic pipe runing all four
sides through the track filling the internal gaps. The glass to be held
within the track with an arrangement of clams (6cm long) incorporating
a glass seal within and placed on internal glass levelers. The glass to
glass modules joining to be with 'H' shaped soft & transparent plastic
profile for relocatability factor.
3 WOODEN PARTITION : Providng and fixing 100mm thick wooden

partition with 75 x 50mm hardwood framing with 12mm thick com. SQM 39 4,275.00 166,725.00
Ply. Complete in all respect as per drawing.
4 U. P. Twinga
GLASS WOOL INSULATION -P/F of 50mm thick 24 kg/Cum. Density
GLASS wool sandwiched between partition panels, complete as SQM 605 1,330.00 804,650.00
required. Make: UP TWIGA, Complete with Tissue Paper to support the
glass wool.
5 PARTITION ABOVE FALSE CEILING -P/F of 75mm thick partition above SQM 235 3,420.00 803,700.00
false ceiling , complete as per detail.
6 ALUMINIUM SKIRTING -P/s aluminum skirting 50mm high, color as per Bottom line
sample.The profile has a 20 micron (average) anodized finish & the
entire surface is supplied with a polyethylene film to protect against
abrasion & stains, the film is removed at the time of handover. RMT 245 285.00 69,825.00
7 GYPSUM PANELING WITH BOXING : P/F G.I Frame for Panelling Saint Gobain
consisting of G.I vertical studs of size 50 mm & horizontal members India gypsum
where ever required as per manufacturer's specs, using Gypsteel
sections, hardwood will be inserted as may be required to fix door SQM 45 1,800.00 81,000.00
frames skirting etc.
8 VENEER PANELLING-Providing and panelling of Veneer with 12mm Sonear /

thick ply, wooden framing, 4mm thk Veneer and polish finish. Green
complete including all grooves as/ design. Basic rate of Veneer Rs. 45/-
per Sq.ft. (Location : Meeting Room, Director Cabin) SQM 98 3,800.00 372,400.00
9 MDF PANELLING-P/F Extra layer for MDF panneling instead of 12mm Green / Bajaj
gypsum, complete including all grooves as/ design. SQM 25 1,825.00 45,625.00
10 LACQUERED GLASS PANELING: P/F extra for 4mm thk. Lacquered Glass Saint Gobain
panelling,instead of 12mm gypsum, Including 8mm thk. Ply with glass SQM 40 5,225.00 209,000.00
on top as/ design.
11 WAVE BOARD PANELLING :- P/F extra 12mm thick wave board

including necessary backing. Complete as/ per design. SQM 15 3,420.00 51,300.00
12 WALL PAPER:-Providing and fixing wall paper on POP/ Gypboard

surfaces with suitable addhesive as per manufacturers specification. SQM 72 1,710.00 123,120.00
(Base Rate -1000/sqmtr)
13 FABRIC / PINUP PANELLING-P&F soft board paneling over adequate Response /

leveled frame, formed of 12 mm thick SITATEX board wrapped in Impact /
approved fabric on walls, finished partitions or back side of storage Season's SQM 35 2,050.00 71,750.00
basic cost of Fabric – Rs-450 per RMT.
14 MDF BOXING : -P/F 12mm thick MDF Boxing with cove and wooden
framing work complete including all grooves as/ design. Location : SQM 15 4,560.00 68,400.00
Cabin
15 ACOUSTICAL PANEL PANELLING-Acoustical Wall Panels - Off the shelf
system Acoustical panels shall be constructed of a single core
construction of dimensionally stable rigid glasswool of medium density
(48 kg/cum) or higher. The thickness of the panel shall be 50mm (2") or
25mm (1") as defined in the drawings. The Size of the panel should be
four feet (1200 mm) wide and two feet (600 mm) high or as shown on
the drawings or as approved. Edge profile shall be Square. Corner
detail shall be Square. Edge treatment shall be resin hardened,
aluminum (with square edge only) or equivalent Wall paper, Fabric or SQM 20 4,560.00 91,200.00
vinyl Finish of approved color and shade shall be applied directly to the
face and edges of the panel and return to the back of the panel to
provide a full finished edge. All corners are fully tailored. Acoustical
Wall Panels shall have a minimum NRC of 0.8 or higher in accordance
with ASTM C-423 for (Type “A” Mounting). All panel components shall
have a Class “A” flame spread rating of 25 or less in accordance with
ASTM E-84. Recommended vendors for the acoustical wall panels are
Armstrong or equivalent as approved. . Location : Cabin front side
16 LAMINATED LEDGE :Providing and fixing 100 x 250mm wide Laminated
ledge made out in 19mm thick commercial Board boxing underneath.
complete as per detailed drawing. Location : Smoke seal RMT 85 475.00 40,375.00
-
Sub Total of PARTITIONS AND WALL CLADDING 3,829,845.00
B-2 CEILING
1 GYPSUM BOARD CEILING : Providing and fixing suspended type gyp Saint Gobain
India gypsum /
board plain false ceiling firmly fixed on GI framework section all similar Lafarge
to specification of M/ India Gypsum Ltd as detailed below:ii) Perimeter Gypsum
channel (MF6A) 20mm x 27mm all along the wall fixed with the help of
nylon selvees and screws @ 600 mm c/c. ii) Intermediate channel
(MF7) 15mm x 45mm x 0.9mm at 1200mm c/c. iii) Ceiling angle 25mm
x 10mm x 0.55mm thick fixed to soft with GI cleat and steel expansion
SQM 680 900.00 612,000.00
anchor fasteners. iv) Ceiling channel (MF5) 80mm x 26mm x 0.5mm @
450mm c/c. v) 12mm thick plain Gypsum board is fixed to the ceiling
section with 25mm drywall screws @ 230mm c/c. finally boards are to
joined and finished so as to have flush look and leveling the board so as
to be in one single plane which includes filling and finishing the board
edges with jointing compound, paper tape. complete as per the
direction of the Engineer-in-charge of the work.
2 MODULAR GRID CEILING- Providing & Fixing of 600 x 600mm Mineral AMF
Fiber, Suspended Ceiling System : Fine fissured (RH - 99) micro look.
INSTALLATION:To comprise main runner spaced at 1200mm centres
securely fixed to the structural soffit by approved hangers at 1200mm
maximum centre & not more than 150mm from spliced joints. The last
hanger at the end of each main runner should not be greater than
600mm from the adjacent wall. 1200mm long cross tees to be
SQM 90 1,375.00 123,750.00
interlocked between main runners at 600mm centre to form 1200 x
600 mm module. Cut cross tees longer than 600mm require
independent support. 600 x 600mm module to be formed by fitting
600mm long cross tees centrally between the 1200 mm cross tees. The
1200mm cross tees to have central ”birdsmouth” notches to facilitate
fitting of 600mm cross tees. Wall angles in white colour to be secured
to walls at 450 mm maximum centres.
3 MODULAR GRID CEILING- Providing & Fixing of 300 x 1200mm Mineral AMF
Fiber, Suspended Ceiling System : Fine fissured (RH - 99) micro look
SQM 95 1,520.00 144,400.00
with necessary GI framing work. Complete in all respect as per drawing.
Location : Work station area
4 VENEER CEILING :-Providing and fixing Veneer ceiling finished in
polish finish along with grooves as per detail drwings with 12mm com.
Ply and wooden framework 2" x 2" upto 900mm c/c suspended from SQM 33 2,850.00 94,050.00
RCC slab to true line & level
5 WOODEN RAFTER CEILING : Providing and fixing 40 x 100mm thk. Veneer :

Wooden slats finished in 4mm thk. Veneer to match the Hardwood Sonear / RMT 132 475.00 62,700.00
flooring. Location : Director cabin & Reception Green
6 ACCESS PANEL : Providing and fixing Access panel in false ceiling Make: Knauf
Frame: Exterior & Interior : made from stable Aluminium profile. Danogips
Connecting Parts:Galvanised steel Material Inlay: moisture resistant
Gypsum Board,12.5MMTHICK Snap Locks 2 pcs.:spring loaded ,
galvanised steel body Safety wire catch: 1mm steel wire 1 pcs SQM 18 2,375.00 42,750.00
7 CEILING PELMETS :Providing and fixing 19mm thick B.W.P pelmets with
hard wood lipping and fixied to ceiling with wooden framing to support
the boardcomplete as per detailed drawing (300mmx200mm) to take RMT 85 430.00 36,550.00
Roller blinds.
8 Cove : P/F of 100 x150mm Coves in Gypsum Ceiling as / detailed RMT 345 135.00 46,575.00
drawing
Sub Total of CEILING 1,162,775.00
B-3 Doors
1 D1 (900X2400) Providing and fixing Single leaf frameless glazed door Hardware :
using 12mm thick toughened glass including fixing stainless steel pivot Ozone
with clamps at top, all patch fittings, floor springs, 1000mm heigh
handles, necessary masonry / glass cutting, making holes, etc.
complete as per detailed drawings. The rate should be inclusive of all NO 13 26,120.00 339,560.00
hardware and PATCH FITTINGS of Ozone make
2 D2 (900X2400) Providing and fixing glazed door with wooden frame Hardware :
using 12mm thick toughened glass including fixing stainless steel pivot Ozone
with clamps at top, all patch fittings, floor springs, 1000mm heigh
3 D3 (1800X2400) Providing and fixing Double leaf frameless glazed door. Hardware :
The shutters comprises of 12mm thick toughened glass including fixing Ozone
stainless steel pivot with clamps at top, all patch fittings, floor springs,
4 D4 ( 750 X 2100) Providing and fixing of 38mm thk flush door without Hardware :
vision panel, door frame in Beech wood of size 100x75, finished in Ozone
1mm laminate both sides with complete hardware. Complete as/detail NO 2 21,370.00 42,740.00
drawing .(LOCATION: TOILETS )
4mm thick veneer out sides, 1mm thick laminate inside with complete
hardware fitting and polish finish. Complete as/detail drawing ( Basic NO 3 26,410.00 79,230.00
rate of Veneer Rs. 550/- per Sqmft ). LOCATION: DIRECTOR TOILETS &
safe room
6 D6 ( 750 X 2100) Providing and fixing of 38mm thk flush door with Hardware :
drawing .(LOCATION: PANTRY )
7 D7 ( 1000 X 2400) Providing and fixing of 38mm thk flush door with Hardware :
drawing .(LOCATION: Server & UPS room )
8 D8 Fire exit Door (900X2400) Providing and fixing fire rated Metal Hardware :
door of specified make including all hardware/ vision panels as per Ozone
suppliers specs. Colour of Powder coating to be approved by the
Architect. (LOCATION: EMERGENCY EXIT DOOR ) NO 1 26,600.00 26,600.00
1mm laminate both sides with complete hardware. Complete as/detail
drawing .(LOCATION: EMERGENCY EXIT DOOR ) NO 1 26,600.00 26,600.00
10 Providing and fixing shaft and electrical panel shutter with Laminate
finish. Complete in all respect as per drawing. Sqm 20 2,375.00 47,500.00
Sub Total of DOORS 970,020.00
C LOOSE FURNITURE:-
1 RECEPTION TABLE WITH CORIAN TOP :- P/F of Reception Table made
out of commercial board finished with 4mm thick veneer, corian Ledge
and led illuminated light complete as per the detailed drawing. The
No. 1 62,700.00 62,700.00
table should have one Drawer units and provision to house PA
Equipments and all cable management. Reception Table Size: 3000 x
750mm
2 RECEPTION TABLE WITH VENEER FINISH :- P/F of Reception Table made
out of commercial board finished with 4mm thick veneer. complete as
per the detailed drawing. The table should have one Drawer units and No. 1 39,900.00 39,900.00
provision to house PA Equipments and all cable management.
Location : Director area size: 1650 x 600mm
3 Board Room Table 11 pax in Veneer Finish :- P/F of Board room table
Size room Table made out of 19mm thick com board and Veneer and
as per approved Shade. The table should have provision of Cable No. 1 87,870.00 87,870.00
management complete as per detailed drawing. Board Room Table
Size: 1400 x 3000mm
4 DIRECTOR CABIN TABLE - P/F and placing in position Big Cabin table
consisting of 25mm thick MDF/ comm. board with approved shade of
HIGH GLOSS VENEERED / PU FINISH TOP & Wooden base with
No. 3 49,400.00 148,200.00
approved shade & custom made wire management system complete
as per detailed drawings. (size: Table size :2400 mm X 900 MM Side
table : 1050 x450 )
5 SENIOR MANAGER CABIN TABLE - P/F and placing in position Big
Cabin table consisting of 25mm thick MDF/ comm. board with
approved shade of HIGH GLOSS VENEERED / PU FINISH TOP & Wooden
No. 2 38,000.00 76,000.00
base with approved shade & custom made wire management system
complete as per detailed drawings. (size: Table size :2100 mm X 750
MM Side table : 1050 x450 )
6 MANAGER CABIN TABLE - P/F and placing in position Cabin table
HIGH GLOSS VENEERED / PU FINISH TOP & Wooden base with
No. 1 33,250.00 33,250.00
approved shade & custom made wire management system complete
as per detailed drawings. (size: Table size :1600 mm X 750 MM Side
table : 1050 x450 )
7 MANAGER CABIN TABLE - P/F and placing in position Cabin table
laminate finish & custom made wire management system complete as No. 6 28,500.00 171,000.00
per detailed drawings. (size: Table size :1600 mm X 750 MM Side
table : 1050 x450 )
8 Work station Veneer Finish :- P/F of work station with Veneer
partition, corian self and 12mm thick toughended glass for director
area work station. made out of 19mm thick com board and Veneer and No. 2 30,400.00 60,800.00
as per approved Shade. complete in all respect as per detailed drawing.
work station size: 1200 x 600mm Location : Director area
9 MEETING TABLE 3 PAX : SIZE - DIA 750 : 25mm thick worktop in
laminate finish. Understructure in metal powder coated legs. Complete
in all respect as per drawing. Note:- Only provision for wire manager is No. 1 6,650.00 6,650.00
provided for. The cable cubby/electrical recipitical/POP up box shall be
extra.
10 MEETING TABLE 4 PAX : SIZE - DIA 800 : 25mm thick worktop in
extra.
11 MEETING TABLE 8 PAX : SIZE - 1050X2100 :25mm thick worktop in
extra.
12 MEETING TABLE 9 PAX : SIZE - 1050X2550 :25mm thick worktop in
in all respect as per drawing. .Note:- Only provision for wire manager is No. 1 20,900.00 20,900.00
extra.
13 PANTRY COUNTER: - P/F of both 600 mm deep under Counter storage
finished with 19 mm thk granite top over 40 mm facia & 450 mm deep
RMT 3.8 17,100.00 64,980.00
over head storage made of comm. board in laminate finish with granite
top including hinges / handles etc. (location= Pantry)
14 Ledge with laminate top:- P/f Ledge made out in 19mm thick board
RMT 3.4 9,310.00 31,654.00
and laminated top as per approved shed and drawing. (Location : Cafe)
15 REPRO / UTILITY COUNTER:- P/F of both 600 mm deep under Counter
storage finished with 40 mm thk laminated top & 450 mm deep over
RMT 5 17,950.00 89,750.00
head storage made of comm. board in laminate finish with granite top
including hinges / handles etc.
16 CAFE COUNTER : - P/F of both 600 mm deep under Counter storage
finished with Granite top over 40 mm facia & 450 mm deep over head
storage made of comm. board in laminate finish with Granite top RMT 4 20,140.00 80,560.00
including hinges / handles etc. (location= Cafe) . ( Lacquared glass not
included )
17 Café Table - P/F café Table with SS legs and Laminated top with egde
Nos 3 12,060.00 36,180.00
banding on edges. (Size :1800mm x 700mm)
18 FULL HT. STORAGE : Providing & fixing Storage made out of 19mm thk
commercial board finished with 1.0mm laminate and balancing
SQM 21 9,025.00 189,525.00
laminate with adjustable laminated shelves complete as /design.(2400
mm High)
19 FULL HT. STORAGE WITH VENEER FINISH : Providing & fixing Storage
made out of 19mm thk commercial board finished with 4mm veneer
SQM 7.5 10,925.00 81,937.50
with adjustable 12mm thick glass shelf and polish finish. Complete in
all respect as per drawing. Location : Director cabin
20 FULL HT. STORAGE FOR JANITOR : Providing & fixing Storage made
out of 19mm thk commercial board finished with 1.0mm laminate and
SQM 5 10,735.00 53,675.00
balancing laminate with adjustable laminated shelves complete as
/design.(2400 mm High)
21 OVER HEAD STORAGE:- Providing & fixing 400deep Over head Storage
made out of 19mm thk commercial board finished with 1.0mm
SQM 45 7,790.00 350,550.00
laminate on both side with adjustable laminated shelves complete
as /design
22 LOW HEIGHT STORAGE VENEER FINISH :- Providing & fixing wooden
low height storage made out in 19mm thick com. Board, 1mm thick
SQM 11 11,870.00 130,570.00
laminate in side and 4mm thick veneer with polish finish. complete in
all reset as per drawing. Location : Cabin and Meeting room
23 LOW HEIGHT STORAGE LAMINATE FINISH:- Providing & fixing wooden
low height storage made out in 19mm thick com. Board, 1mm thick
SQM 9 9,690.00 87,210.00
laminate on both side as per approved shade. complete in all reset as
per drawing. Location : Cabin
24 Meduim Ht Storages:- Providing & fixing Storage cabinets made out of
19mm thk commercial board finished with 1.0mm laminate on both SQM 43 10,350.00 445,050.00
side with adjustable laminated shelves complete as /design

Sub Total of LOOSE FURNITURE (Rupees) 2,378,361.50
D FEATURE WALLS :-
Providing and fixing Reception area feature walls with veneer and glass 43,200.00
finish. Size: 3650 x 2400mm
1 No. 1 90,250.00 90,250.00
Feature wall in Director entrance area with veneer panelling, Italain

2 stone, Bamboo and mirror finish. Complete in all respect as per
drawing.
a Veneer panelling Sqm 10 4,600.00 46,000.00 4,850.00

b Italian marble cladding Sqm 12 5,130.00 61,560.00
c Mirror panelling Sqm 12 2,660.00 31,920.00
d Bamboo Nos. 30 2,000.00 60,000.00
e Wooden framing Sqm 9 4,275.00 38,475.00
Feature wall with Onex stone cladding with groove. Complete in all
respect as per drawing. Size: 2475 x 2400mm Location : Secondary
reception back drop wall
3 No. 1 142,500.00 142,500.00
Feature wall in director cabin with jali, veneer finish panel and leather
4 chesterfield finish. Complete in all respect as per drawing.
a Wooden framing Sqm 10 4,275.00 42,750.00

b Veneer panelling Sqm 14 4,275.00 59,850.00
c Chestredfield leatherite Sqm 9 5,225.00 47,025.00
d 18mm MDF Jali Sqm 11 6,175.00 67,925.00
Feature wall Reception lounge with Gypsum board and SS Sheet finish.
Complete in all respect as per drawing. Size: 5470 x 2400mm
5 No. 1 93,100.00 93,100.00
Sub Total of FEATURES (Rupees) 781,355.00
E FINISHES
1 Plastic emulsion paint on walls and gypboard/POP ceiling including ICI Delux/
surface preparation, primer coats, leveling patti and minimum 3 coats Asian /
of brush and roller finish. Berger / SQM 1050 200.00 210,000.00
Nerolac
2 Texture paint:-providing and applying texture paint on wall of approved ICI Delux/
brand and manufacturer after scrapping, having the existing finish and Asian /
applying primer coat. ( Basic rate of Texure paint Rs.80- per Sq.ft ) Berger / SQM 125 1,140.00 142,500.00
Nerolac
3 Accent colour paint : Providing and applying Accent colour paint on ICI Delux/
wall and ceiling as approved by the architect, including all grooves etc. Asian /
complete as directed. Berger / SQM 45 235.00 10,575.00
Nerolac
4 DUCO paint : Duco paint on MDF panels as approved by the architect, ICI Delux/
Asian /
Berger / SQM 75 1,520.00 114,000.00
Nerolac
including all hardware, grooves etc. complete as directed.
Sub Total of FINISHES (Rupees) 477,075.00
F SIGNAGES:-
1 Main Company Logo: P/F of Company logo Made out of MDF back
wash led illuminated signage as per detailed drawing Nos. 2 45,600.00 91,200.00
2 Office signages, repro, store Room, pantry, cabins and meeting rooms
etc. Nos. 20 1,520.00 30,400.00
3 Fire Evacuation Plans : P/F Fire evacuation panels. Ecosolvent print

graphic in self luminescent vinyl medium, sandwiched between 3mm
clear acrylite panels,fixed by ss studs and mounted to wall surface.size : Nos. 5 4,560.00 22,800.00
210 x 300
4 Fire EXIT SIGNAGES- P/F of FIRE EXIT SIGN - LED edge lit sign suspended
from ceiling. Fixed to ceiling by aluminium clamp fixture.-LED lighting
source, Emergency time: 120mins, Back up Ni-cad battery
300mAH/3.6V, Material: Aluminum Alloy + Acrylic size - 300 x 180 Nos. 7 4,370.00 30,590.00
5 WORKSTATION SIGNAGES- P/F of signages for Workstations. Nos. 88 1,520.00 133,760.00

6 Toilet signages Nos. 4 1,035.00 4,140.00
7 GRAPHICS -Providing and Fixing digitally printed graphics as details on
existing surface.Make 3M. SQM 38 1,610.00 61,180.00
8 Etching Film: P/F Etching Film to be installed over the glass. Complete 3M / Garware
as per the detials. Make 3M. SQM 55 1,140.00 62,700.00
9 Coloured Etching Film: P/F Etching Film to be installed over the glass. 3M / Garware
Complete as per the detials. Make 3M. SQM 30 1,375.00 41,250.00
Sub Total of SIGNAGES (Rupees) 478,020.00
G MISCELLANEOUS
1 ROLLER BLINDS
Supplying and fixing of Roller Blinds of the following shades made as MAC Décor/
per manufacturers specifications and as per architect approval. Livin SQM 185 1,235.00 228,475.00
2 Supplying and fixing of Wooden Blinds of the following shades made

as per manufacturers specifications and as per architect approval. SQM 55 1,710.00 94,050.00
Director area cabin
Sub Total of Miscellaneous 322,525.00
H TOILET WORKS
WALL TILE: (till 8'-0" ht.) Cladding vitrified tiles for dado/ up-to 8'
height in pattern indicated by Architect in toilets with mortar of
1 required thickness necessary to bring the surface plumb and minimize SQM 9 1,330.00 11,970.00
joints / cut tiles. Basic Rate of Tiles-Rs 700/sqmt. Tile size :- 300X600 ,
VITRIFIED TILE -AS/APP. SAMPLE. Location: General toilet
ITALIAN STONE CLADDING ON WALLS: P/F of Italiann Stone Cladding
In pattern indicated by Architect in toilets with mortar of required
2 SQM 86 4,560.00 392,160.00
thickness necessary to bring the surface plumb and minimize joints .
Basic Rate-Rs3000 /sqmt. Location : Toilet
ITALIAN STONE FLOORING :-Providing and laying Italian stone Flooring
as per design laid over adequate thickness of cement mortar
3 1:4(1cement: 4 coarse sand) mix ,cement slurry, matching pigment , SQM 27 4,560.00 123,120.00
Italian shall be Polished as approved by the Architect.(Basic Cost of
Stone = Rs. 3000 per sqmt.)(Location - all Toilet )
MOSAIC TILE BAND ON WALL (150MM WIDE) - P/F Mosaic tile on wall
4 RMT 14 520.00 7,280.00
as per drawing and designs.
ITALIAN STONE SKIRTING :- Providing and fixing 100mm high granite
5 stone skirting. .(Basic Cost of Stone = Rs. 3000 per sqft.)(Location - RMT 45 570.00 25,650.00
Toilet )
STALL PARTITIONS-P&F Stall Partitions, complete as per detail drawing.
6 Nos. 1 45,600.00 45,600.00
(Make : Classic Series )
URINAL PARTITION :- Providing and fixing Urinal partition made out in
7
stone frame and MDF jali. complete in all respect as per drawing.
a Double Italian stone frame fixed on floor to ceiling Nos. 2 5,700.00 11,400.00
b MDF jali finish in duco paint. Nos. 2 8,070.00 16,140.00
MIRROR-P&F 6mm thk looking rippleless mirror including concealed
8 SQM 11 2,660.00 29,260.00
fixing detail. Please refer the detail drawing.
WASH BASIN COUNTER - Providng and fixing of Italian stone wash
basin counter. All edges to be mirror polished/sealed with silicon
9 mastic sealant of approved make & color. The rate should include Nos. 5 8,070.00 40,350.00
cutting; rounding/ nosing edges. Basic Rate of Italian stone
Rs.3000/sqmt. complete in all respect as per drawing.
10 Providing and filling khanger in toilet sunk area floor. CUM 15 1,900.00 28,500.00
WATER PROOFING IN TOILETS - Providing and Laying two layers of Tape Tape Crete /
Fosroc/
Crete with cement on the toilet and kitchen floors before lying of Pidilite/
khunger. The same shall be carried out on all adjoining vertical surfaces Unibase
up-to height of 450 mm above the finished floor level. The application
11 and the mix should be as per manufacturer specifications. The rate SQM 62 1,425.00 88,350.00
shall be inclusive of 12 mm 1:4 cement sand plaster for protection. The
rate shall also include preparation of surface for painting/ lying of
material. Testing will be mandatory by water ponding for at least 24
hours. The water proofing shall carry guarantee of 10 years
Total carried over to summary 819,780.00
MODULAR FURNITURE
Sl. DESCRIPTION AMOUNT
A WORK DESKS 1,318,000.00
B CHAIRS 699,480.00
S. No. Item Description Make UNIT QTY RATE AMOUNT

WORK DESKS
A STAFF WORKSTATION (L Shape) : Size: 1500W x 1350Wx H1050. Thickness of the frame
to be 60mm along the main spine and the return spine to be 28mm thick. Panel Frame is
made of 6063 aluminum with 1.2mm thickness,One total frame consist of 4 pieces of
extrusion aluminum bar, they are connected by screws at each corner. Tiles below the
worktop to be made of laminated finish. Fabric tile above the worktop made of two kundan No. 25 20,520.00 513,000.00
pieces of 6mm thick particle boards, between these two particle boards there has laths
as stiffener, and they are being fixed by staples. Outside of the wooden structure, the
fabric is glued on particle board with solvent adhesive and clenched with staple at the
end. One raceway-150mm High and 3mm thick required below the worktop.
B CUBICLES : 2560mmX2130mm: Supply and positioning of main desk-1500mmx1500mm.
The table top is made up of high density and high pressure prelaminated finish. The
laminate has to have grains in dark or light finishes.The understructure is made up of
epoxy powder coated tubular metal legs. Perforated modesty panel in the front. The kundan No. 9 21,000.00 189,000.00
thickness of the partition to be 50mm and height of 1200mm.
C STAFF WORKSTATION : Size: 1200L x600Wx H1050 : Thickness of the frame to be 60mm
along the main spine and the return spine to be 28mm thick. Panel Frame is made of
6063 aluminum with 1.2mm thickness,One total frame consist of 4 pieces of extrusion
aluminum bar, they are connected by screws at each corner. Tiles below the worktop to
be made of laminated finish. Fabric tile above the worktop made of two pieces of 6mm kundan No. 56 11,000.00 616,000.00
thick particle boards, between these two particle boards there has laths as stiffener, and
they are being fixed by staples. Outside of the wooden structure, the fabric is glued on
particle board with solvent adhesive and clenched with staple at the end. One raceway-
150mm High and 3mm thick required below the worktop.
TOTAL 1,318,000.00
S. No. Item Description Make UNIT QTY RATE AMOUNT
C CHAIRS
1 WORKSTATION CHAIR - Supply and positioning of Mid back office TASK chairs having
advanced synchro tilt mechanism, back height adjustment, seat depth adjsutment, height
adjustable armrests. The back to be locakble at 4 different positions and tilt tension
adjustment. The chairs to have soft castors for teh hard floor or hard castors for teh soft
floor. The foam is high density moulded polyurethane foam. The fabric used for the kundan No. 125 3,000.00 375,000.00
upholstery to be 100% polyester with acrylic backing, to pass the CAL 117, Class 1
flammabilty test and having an abrasion resistance of 100,000 double rubs ASTM D4157-
03. Chair to have pneumatic height adjustment,five star base on castors. The chair should
meet ANSI/BIFMA durable standards.
2 SENIOR CABIN CHAIRS:Supplying and placing of High Back Chair having advanced
synchro tilt mechanism, back height adjustment, seat depth adjsutment, height
adjustment. The chairs to have soft castors for teh hard floor or hard castors for the soft
floor. The foam is high denisty polyurethane foam.The fabric used for the upholstery to be kundan No. 3 4,560.00 13,680.00
100% polyester with acrylic backing, to pass the CAL 117, Class 1 flammabilty test and
having an abrasion resistance of 100,000 double rubs ASTM D4157-03. Chair to have
pneumatic height adjustment,five star base on castors. The chair should meet
ANSI/BIFMA durable standards.
2 SENIOR VISITOR CHAIRS:Supplying and placing of Medium Back Chair having advanced
synchro tilt mechanism, back height adjustment, seat depth adjsutment, height
adjustment. The chairs to have soft castors for teh hard floor or hard castors for the soft
floor. The foam is high denisty polyurethane foam.The fabric used for the upholstery to be kundan No. 8 4,080.00 32,640.00
100% polyester with acrylic backing, to pass the CAL 117, Class 1 flammabilty test and
having an abrasion resistance of 100,000 double rubs ASTM D4157-03. Chair to have
pneumatic height adjustment,five star base on castors. The chair should meet
ANSI/BIFMA durable standards.
3 DIRECTOR CABIN CHAIR:Supply and positioning of executive chairs with 100% polyester
woven fabric mesh back and seat upholstered in fabric finish.Cushioning material for seat
is molded high-resilient polyurethane foam with densities and IFDs which provide
excellent support and longevity. The chair to have asymmetrical lubmar support
adjustment, 4-D armrests, lockable back and forward tilt mechanish,Seat depth kundan No. 3 5,760.00 17,280.00
adjsutment, tilt tension adjustment and balance 3-point tilt mechanism. The chair to have
the pelvic support and 2" of passive torsion flex in tehj upper back. The chair to have
pnuematic height adjsutment and polished aluminum five star base. Headrest for
supporting the head movements.
4 DIRECTOR CABIN VISITOR CHAIR:Supply and positioning of executive chairs with 100%
polyester woven fabric mesh back and seat upholstered in fabric finish.Cushioning
material for seat is molded high-resilient polyurethane foam with densities and IFDs
which provide excellent support and longevity. The chair to have asymmetrical lubmar
kundan No. 9 5,520.00 49,680.00
support adjustment, 4-D armrests, lockable back and forward tilt mechanish,Seat depth
adjsutment, tilt tension adjustment and balance 3-point tilt mechanism. The chair to have
the pelvic support and 2" of passive torsion flex in tehj upper back. The chair to have
pnuematic height adjsutment and polished aluminum five star base.
5 CABIN CHAIR :Supplying and Placing of Visitor Non Revolving Chair having fabric
upholstered seat and back. Four legged chair on glides. The frame is tubular in the metal
powder coated finish.The fabric used for the upholstery to be 100% polyester with acrylic
kundan No. 6 3,000.00 18,000.00
backing, to pass the CAL 117, Class 1 flammabilty test and having an abrasion resistance
of 100,000 double rubs ASTM D4157-03.The chair should meet ANSI/BIFMA durable
standards.
6 MEETING ROOM CHAIRS: Supplying and positioning Mid back chair with fabric
upholstered seat & mesh back.Height adjustable armrests with pivot.Lumbar support
adjustment.Seat Depth adjustment. Tilt tension adjustment. Synchronized tilt kundan No. 24 5,520.00 132,480.00
mechanism.360 degrees swivel with synchronized tilt.5 star black base with soft
castors.Pneumatic height adjustment.Grade “A” fabric.
7 BOARD ROOM CHAIRS: Supplying and positioning Mid back chair with fabric upholstered
seat & mesh back.Height adjustable armrests with pivot.Lumbar support adjustment.Seat
Depth adjustment. Tilt tension adjustment. Synchronized tilt mechanism.360 degrees kundan No. 11 5,520.00 60,720.00
swivel with synchronized tilt.5 star black base with soft castors.Pneumatic height
adjustment.Grade “A” fabric.
TOTAL 699,480.00
GRAND TOTAL 2,017,480.00

CARPET FLOORING
S. No. DESCRIPTION Make UNIT Qty RATE AMOUNT
CARPET FLOORING: Providing and laying carpet tile Standard

600x600 mm as approved by Architect's complete as per Carpet/Equiv.
manufacturer's specification.(LOCATION : GENERAL OFFICE
1 AREA, MEETING ROOMS, CABINS, ETC) SQM 425.00 1,530.00 650,250.00
high quality
Total 650,250.00
BOQ FOR SUPPLY OF LOOSE FURNITURE FOR RECEPTION / LOUNGE / CAFETARIA
S.NO DESCRIPTION UNIT QTY RATE AMOUNT
1.0 VISITOR'S LOUNGE

1.1 Sofa: Sofa for waiting area Leatherite
upholstered (Rate quoted for per seat.)
Nos 6 30,000.00 180,000.00
1.2 Table: Center Table for waiting area Corian

finish with SS base 45,000.00 45,000.00
Nos 1
2.0 WAITING LOUNGE

2.1 Chair: High Back and Low Leatherite
Nos 2 30,000.00 60,000.00
2.0 Table: Center Table for waiting area wooden and

veneer finish.
Nos 1 13,800.00 13,800.00
3.0 CABIN
3.1 Sofa: Medium Back and Low Leatherite
Nos 4 10,500.00 42,000.00
3.2 Table: Side Table for Cabin glass top with SS

base finish
Nos 2 9,000.00 18,000.00
4.0 DIRECTOR CABIN

4.1 Sofa: 3 Seater Sofa for Director cabin Leatherite
Nos 2 28,800.00 57,600.00
4.2 Sofa: 2 Seater Sofa for Director cabin Leatherite

Nos 1 19,200.00 19,200.00
4.3 Sofa: Sofa for Director Cabin Leatherite

Nos 5 10,200.00 51,000.00

S.NO DESCRIPTION UNIT QTY RATE AMOUNT
4.4 Table: Side Table for Director cabin veneer
finish with SS base
Nos 5 10,000.00 50,000.00
4.5 Table: Center Table for Director cabin with

Glass top with SS base finish
Nos 3 14,000.00 42,000.00
5.0 CAFETERIA AREA 1

5.1 Chair: Cafeteria Chair
Polycarbonate stackable chair with fixed
frame, in transparent and white colour
Nos 18 5,000.00 90,000.00
6.0 CAFETERIA AREA 2

6.1 Stool: Cafeteria Stool
Nos 6 5,500.00 33,000.00
TOTAL FOR LOOSE FURNITURE - 701,600.00

BOQ FOR ELECTRICA, PA, CCTV, ACCESS & FIRE DETECTION WORK FOR ACE FARIDABAD
SUMMARY
S. No. Description Rs. Amount
A. POINT WIRING Rs. 1,257,255.00
B. CONDUITING FOR TELEPHONE,COMPUTER & CONDUITING AND WIRING FOR T.V.

SYSTEM. Rs. 166,930.00
C. EARTHING SYSTEM Rs. 505,400.00
D. SUPPLY & FIXING OF LIGHTING FIXTURES Rs. 692,280.00
E. CABLES, MAINS & SUB MAINS Rs. 358,605.00
F. RACEWAYS AND CABLE TRAYS Rs. 629,275.00
G. DISTRIBUTION BOARDS Rs. 221,350.00
H. PUBLIC ADDRESS SYSTEM Rs. 279,445.00
I. FIRE DETECTION SYSTEM (ADDRESSABLE) Rs. 410,665.00
j. SUB-DISTRIBUTION BOARDS Rs. 244,725.00
k. CCTV SYSTEM Rs. 170,240.00
l. ACCESS CONTROL SYSTEM Rs. 238,620.00
S. No. Description Unit Qty. Rate Amount
A. POINT WIRING
Note
Point wiring rates are inclusive of 2x2.5+1x1.5 sq mm FRLS PVC insulated
stranded copper conductor wires for circuit and 1.5 sq mm FRLS FRLS PVC
insulated copper conductor insulated earth wire.
1 Wiring for the following light points with 3x1.5 Sq.mm FRLS PVC insulated stranded
copper conductor wires in concealed FRLS PVC conduits in F.ceiling/walls/ceiling as direc
ted including providing 6 amps flush type switches, 5 sided G.I Boxes for housing switc
hes and earthing complete as required.
a. First point controlled by one no. 6 amp switch. Nos. 80 800 64,000.00
2 Same as item No. 1 above but LOOP POINT i.e. wiring of point looped from first point with
2 x 1.5 +1x1.5 sq. mm FRLS. insulated copper conductor wire in concealed/exposed
FRLS PVC conduit and earthing Nos. 337 570 192,090.00
3 Wiring for the following light points controlled by MCB in DB (Cost of MCB has been taken
elsewhere in the tender) with 2 x 2.5 sq. mm FRLS PVC insulated copper conductor wires
in concealed/exposed FRLS PVC conduits as called for and earthing. For Emergency
light
a. First point controlled by existing MCB in D.B. Nos. 8 2850 22,800.00
4 Same as item No. 3 above but LOOP POINT i.e. wiring of point looped from first point with
2 x 2.5 +1x1.5 sq. mm FRLS. insulated copper conductor wire in concealed / exposed
FRLS PVC conduit and earthing For Emergency light Nos. 15 2375 35,625.00
5 Wiring for 6 amps light plug outlets with 3X1.5 sq.mm FRLS PVC insulated stranded
copper conductor wires in FRLS PVC Conduits in ceiling/walls/floor as directed including
providing 6 amps flush type 5 pin socket and 6 amps switch with cover plate, 5 sided G.I
boxes for housing switches, sockets and earthing complete as required.
(for general areas) Nos. 30 950 28,500.00
6 Wiring for inline fan points with 2 x 2.5 sq.mm FRLS PVC insulated stranded copper con
ductor wires in concealed FRLS PVC conduits in F.ceiling/ walls/ Ceiling as directed
including providing 16 amps flush type switches 16 amps 3 pin socket near inline fan, 5
sided G.I. boxes for housing switches and 16 amps 3 pin socket outlet and earthing and
complete as required.(including body earth for GI boxes) Nos. 4 2850 11,400.00
7 Wiring for projector points with 2 x 4 + 1 x 2.5 sq mm FRLS PVC insulated stranded
copper conductor wires in concealed FRLS PVC conduits in F.ceiling/ walls/ Ceiling as
directed including providing 16 amps flush type switch near the white board and 16 amps
5 pin socket near the projector in ceiling , 5 sided G.I. boxes for housing switches and 16
amps 3 pin socket outlet and earthing and complete as required.(including body earth for
GI boxes) (1 point per circuits) Nos. 5 2850 14,250.00
8 Wiring for VAV points with 3 x 2.5 sq.mm FRLS PVC insulated stranded copper con
ductor wires in concealed FRLS PVC conduits in F.ceiling/ walls/ Ceiling as directed
including providing 6 amps flush type switches 6 amps 3 pin socket near VAV points, 5
sided G.I. boxes for housing switches and 16 amps 3 pin socket outlet and earthing and
complete as required.(including body earth for GI boxes) ( 3 to 4 points per circuits) Nos. 0 3800 -
9 Wiring for 16 amps power outlet points with 2 x4 sq.mm FRLS PVC insulated stranded
copper conductor wires in concealed/recessed FRLS PVC conduit as directed including
providing 16 amps flush type switch and 6 pin socket with cover plate 5 sided G.I. outlet
boxes for switches and socket and earthing the third pin with 2.5 sq mm FRLS PVC
stranded copper wire complete as required (Only one outlet shall be connected on each
circuit) (including body earth for GI boxes) Nos. 8 2375 19,000.00
10 Wiring for 16 amps power outlet points with 2X4 sq.mm FRLS PVC insulated stranded
copper conductor wires for the first power outlet and 4 sq.mm FRLS PVC insulated
stranded copper conductor wires for the second outlet, in concealed FRLS PVC conduits
in F.ceiling/ walls/Ceiling/floor ducts as directed including providing 16 amps flush type
switch and 6 pin socket with cover plate, 5 sided G.I. outlet boxes for housing switches
and socket, and earthing the third pin with 2.5 sq.mm FRLS PVC insulated copper
conductor wires complete as required (Two power outlets shall be connected on each Set of
circuit)(including body earth for GI boxes) Two 12 4750 57,000.00
11 Wiring for A/C outlet points with 2X4.0 sq mm FRLS PVC insulated stranded copper
conductor wires in FRLS PVC conduitl/wall/floor ducts as directed including providing 25 A
socket with 25 amps SP MCB ( Tiny Trip) 5 sided GI Outlet Box for housing and socket
and MCB and earthing with 2.5 sq. mm FRLS PVC insulated stranded Copper Conductor
wires complete as required. Nos. 1 7600 7,600.00
12 Wiring for UPS/Raw plug outlets points with three core, 2.5 sqmm FRLS PVC Insulated
and PVC sheathed flexible cable with bright annealed electrolytic copper conductor , 1100
volt grade confirming to IS : 694/1990 with latest amendments, in existing Channels/
conduit in ceiling/walls/floor including all cable termination accessories) (including body
earth for GI boxes) RM 2450 140 343,000.00
13 Wiring for UPS/Raw plug outlets points with three core, 4.0 sqmm FRLS PVC Insulated
and PVC sheathed flexible cable with bright annealed electrolytic copper conductor , 1100
volt grade confirming to IS : 694/1990 with latest amendments, in existing Channels/
conduit in ceiling/walls/floor including all cable termination accessories) Earthing of GI Box
to be included RM 700 190 133,000.00
14 Wiring for UPS plug outlets points with three core, 6.0 sqmm FRLS PVC Insulated and
PVC sheathed flexible cable with bright annealed electrolytic copper conductor , 1100 volt
grade confirming to IS : 694/1990 with latest amendments, in existing Channels/ conduit
in ceiling/walls/floor including all cable termination accessories) RM 0 330 -
The word UPS shall be engraved on all UPS sockets
The word RAW shall be engraved on all RAW sockets
15 Providing and fixing of 1 Nos.6 amp flush type 3 pin universal socket and 1 No. 6 amps
switch cover plate, 5 sided G.I. Boxes for housing switches and sockets and earthing
complete as required (for UPS). GI Box to have earth pin for body earthing Nos. 8 475 3,800.00
16 Providing and fixing of 2 Nos.6/13 amp flush type 3 pin international socket and 1 No. 6
amps switch cover plate, 5 sided G.I. Boxes for housing switches and sockets and
earthing complete as required (for UPS). GI Box to have earth pin for body earthing Nos. 124 600 74,400.00
17 Providing and fixing of 3 Nos.6/13 amp flush type 3 pin international socket and 1 No. 6
earthing complete as required (for UPS). GI Box to have earth pin for body earthing Nos. 4 800 3,200.00
18 Providing and fixing of 2 No.6/13 amp flush type 3 pin international socket and 1 No. 6
earthing complete as required ( for raw) GI Boxes to have earth pin for body earthing Nos. 6 850 5,100.00
19 Providing and fixing of 1 No.6/13 amp flush type 3 pin international socket and 1 No. 6
earthing complete as required ( for Raw) GI Boxes to have earth pin for body earthing Nos. 124 560 69,440.00
20 Providing and fixing of 1 No.16 amps flush type 6 pin socket and 1 No. 16 amps switch
with indicator, cover plate, 5 sided G.I. Boxes for housing switches and sockets and
earthing complete as required (for UPS) GI Boxes to have earth pin for body earthing Nos. 10 615 6,150.00
21 Providing and fixing of 16 amp flush type 6 pin socket and 16 amp switch, cover plate, 5
sided G.I. Boxes for housing switches and sockets and earthing complete as required GI
Boxes to have earth pin for body earthing Nos. 10 615 6,150.00
22 Providing and fixing Underfloor Access Outlets (250 x 250 x 60 - mm 75 compartments
1Trap including providing 4 Nos 6 Amps international sockets and 2 nos 6 Amps switch
and space for 4 Nos. RJ-45 data/ voice outlet complete as required. Nos. 1185 -
23 Providing and fixing in position Legrand Make pop-up boxes 3+6 modules including 3 no. 6
amps socket with switch and 4 nos cat 6 RJ45 data/voice outlet Nos. R.O 11875.0
24 Supply and fixing of the following sizes of thermoplastic moulded plug and socket in PVC
Box of suitable size flush / surface and making connections complete as required. The
box shall be IP 44.
a. 3 pin 16/20 A 1 phase industrial socket with plug top Nos. 6 3750 22,500.00
b. 3 pin 32 A 1 phase industrial socket with plug top Nos. R.O 4750
c. 3 pin 20 A 1 phase industrial socket with interlocking switch and plug top Nos. R.O 4275
25 Providing and fixing in position the following FRLS PVC conduits including all accessories
concealed in F. ceiling/wall/floor as required including 1.6 mm thick M.S. junction or pull
boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires
in the length of conduit.
a. 20 mm dia conduit ( 1.6 mm thick) RM 100 75 7,500.00
b. 25 mm dia conduit (1.6 mm thick) RM 450 85 38,250.00
c. 32 mm dia conduit (2.0 mm thick) RM 100 165 16,500.00
26 The Electrical Contractor shall provide sufficient temporary lighting for working in the
Building total area 8661.8 sq. ft. divided in 1 floors and maintain the same till completion of
the project.It shall include replacement of all fused/faulty lamps.It shall include providing 16
A plug sockets (industrial type with ON/OFF switch/MCB) on 4 sides walls one plug at
every 3 meter distance. The Contractors will tap off supply from these plugs for his use.
Halogen/tubelights to maintain a lighting level of 150 lux on the floor,.Each 15 A socket and
each Light circuit shall be protected by suitable MCBs.Use three core PVC Insulated PVC
sheathed copper conductor cables for wiring.The contractor shall salvage the complete
wiring and take it back at the end of the project. L.S. 1 76000 76,000.00
TOTAL CARRIED OVER TO SUMMARY 1,257,255.00
B. CONDUITING FOR TELEPHONE , COMPUTER & CONDUITING AND WIRING FOR

T.V. SYSTEM.
concealed in F. ceiling (PVC conduit not to be installed above false ceiling)/wall/ floor as
required including M.S. junction or pull boxes with 3mm thick perspex sheet cover plate
complete with 1.6 mm dia G.I. pull wires in the length of conduit.
a. 20 mm dia conduit RM 125 90 11,250.00
b. 25 mm dia conduit RM 400 100 40,000.00
c. 32 mm dia conduit RM 100 95 9,500.00
2 Providing and fixing in position the following PVC flexible G.I Wire reinforced conduits
including all fixing accessories on to the modelur furniture
a. 25 mm dia flexible conduit with end couplers RM 200 45 9,000.00
b. 32 mm dia flexible conduit with end couplers RM 55 -
3 Providing and fixing in position suitable 1.2 mm thick G.I./ PVC outlet box for RJ- 45
computer outlet with all fixing accessories as required. Nos. 570 -
4 Supply and Laying including numbering / ferruling of wire (8 digit) and the continuity test
for each cable of Cat 6 - Telephone / Data cable in existing G. I. Channel. RM 40 -
5 Providing and fixing in position suitable 1.6 mm thick G.I. outlet box for 2 nos RJ - 45 for
Data/ voice outlet including crimpling with all fixing accessories as required. Nos. 125 700 87,500.00
6 Providing and fixing in position suitable 1.6 mm thick G.I. outlet box with 1 no RJ - 45 for
Data/ voice outlet including crimpling with all fixing accessories as required. Nos. 570 -
7 Supply and fixing of 1.6 mm thick G.I Box along with RG 11 TV Co axial socket with Cover
Plate Nos. 2 340 680.00
8 Supply drawing connecting testing and commissioning of TV Coaxial cable RG 6 in
existing conduit RM 200 45 9,000.00
TOTAL CARRIED OVER TO SUMMARY 166,930.00
C. EARTHING SYSTEM
1 Providing and fixing in position the following copper /GI strips and wires including providing
all fixing accessories and effecting proper connections
a. G.I. tape 50 mm x 6 mm RM 0 330
b. Copper tape 50 mm x 6 mm RM 0 3325 -
c. G.I. tape 25 mm x 6 mm RM 150 230 34,500.00
d. Copper tape 25mm x 6 mm RM 0 1140 -
e. Copper wire 8 SWG RM 300 95 28,500.00
f. Copper wire 12 SWG RM 200 85 17,000.00
2 Supply & laying, effecting proper connections, testing & commissioning of the following
sizes of 1.1 KV unarmoured PVC insulated PVC sheathed copper conductor cables
conforming to IS:1554 Part I - 1976 for Armoured/ unarmoured cable and IS 694 for
Flaxible cable with latest amendments laid over MS supports in existing RCC ducts/ laid in
ground /laid on Cable Trays including clamping the cables to supports in an approved
manner as required complete with all accessories.
a. 1c x 120 sq.mm PVC insulated PVC flexible copper conductor cables (For 120 KVA UPS
System Earthing ) RM 760 -
b. 1c x 25 sq.mm PVC insulated PVC flexible copper conductor cables (For 30 KVA UPS
Body Earthing ) RM 300 570 171,000.00
c. 1c x 25 sq.mm PVC insulated PVC flexible copper conductor cables (For Server room
Earthing ) RM 150 570 85,500.00
d. 1 x 10 Sq. mm PVC insulated copper conductor wire (Green Colour for UPS DB Sub-main
Earthing) RM 80 520 41,600.00
e. 2 Nos 1 x 10 Sq. mm PVC insulated copper conductor wire (Green Colour for UPS DB
Sub-main Earthing) RM 100 380 38,000.00
f. 1 x 6 Sq. mm PVC insulated copper conductor wire (Green Colour) RM 60 285 17,100.00
3 Supplying and making terminal joints for the following size of 1.1 KV PVC insulated copper
conductor armoured cables including providing heavy duty copper terminal crimping lugs,
solder, insulation tape, approved sealing epoxy compound, double compression brass
cable glands, effecting gland connections and effecting terminal connections to the
equipment complete as required.
a. 1c x 120 sq.mm PVC insulated PVC flexible copper conductor cable joints Jt 0 285 -
b. 1c x 70sq.mm PVC insulated PVC flexible copper conductor cable joints Jt 0 190 -
c. 1c x 25 sq.mm PVC insulated PVC flexible copper conductor cable joints Jt 10 190 1,900.00
4 Providing earthing station at location as called for including providing 600 mm x 600 mm x
3 mm thick tinned copper electrode 2 Nos 50 x 6 mm copper strip (for body earthing GI
strip can be considerd) up to ground level 20mm dia medium class GI pipe (India Tube
Company make or approved equal) CI funnel with 20 gauge GI wire mesh, masonry
chamber with concrete base, CI manhole cover (cover to be heavy duty) with frame
(300mm x 300mm) and bitumastic paint and packing the fixture of charcoal and common
salt around plate electrode complete as per I.S. ( Minimum depth shall be 4.2 M ) for
Server /UPS earthing Nos. 3 19000 57,000.00
5 Providing earthing station at location as called for including providing 600 mm x 600 mm x
6 mm thick tinned GI electrode 2 Nos 50 x 6 mm GI strip (for body earthing GI strip can be
considerd) up to ground level 20mm dia medium class GI pipe (India Tube Company make
or approved equal) CI funnel with 20 gauge GI wire mesh, masonry chamber with concrete
base, CI manhole cover (cover to be heavy duty) with frame (300mm x 300mm) and
bitumastic paint and packing the fixture of charcoal and common salt around plate
electrode complete as per I.S. ( Minimum depth shall be 4.2 M ) for Body earthings Nos. 0 14250 -
6 Supply,Installation, testing and commissioning of Maintenance Free Earthing of make
Electrolytic Earthing comprising of type 'K' copper 2.4 mm wall thickness, hollow tube 10
feet long, 2.125 inches outer diameter completely filled with non hazardous metallic salts
(Terrafill) to achieve an earth resistance of less than 1 ohms. Provide Manhole chamber at
the top for inspection purpose Nos. 0 28500 -
7 Supply, installation, testing and commissioning of sheet metal enclosed 250 x 200 x 150
( D) mm insulated earth distribution board with 1 nos. 50 x 6 mm copper tinned earth bars
suitable for 6/8 nos connections complete with all fixing accessories as required. Nos. 2 2850 5,700.00
8 Supplying and laying of the following sizes of Medium duty GI Pipes below paved area
including chase cutting and back filling.
a. 50 mm dia RM 0 285 -
b. 80 mm dia RM 10 760 7,600.00
D. SUPPLY & FIXING OF LIGHTING FIXTURES

1 Supplying ,fixing in position testing and commissioning of the following Lighting fixtures
including lamps at site. . Use all Philips Trulite/Osram lumilux plus Eco lamps in
Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL
lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for
approval prior to procurement of fixtures)
Note All Light Fixture shall be with H.F. electronic ballast ( THD less than 10% and P.F.
0.995 )
a. 1 x 36 watts Fluorescent Light fixture as per Wipro Cat No. WDF 9140 SGW or Equivalent
make Nos 0 -
b. 1 x 28 watts T- 5 lamp cove light as per Wipro Cat No WDF 9128 SGW or Equivalent
make Nos 180 1320 237,600.00
c. 1 x14 watts T- 5 lamp cove light as per Wipro Cat No WDF 9114 SGW or Equivalent
make Nos 20 1200 24,000.00
d. 2 x 36 watts CFL Light fixture as per Wipro Cat No WVP 78236 APF (working Area) or
Equivalent make Nos 0 -
e. 4 x 14 watts T5 Lamp Light fixture as per Wipro Cat No WVF 53414 SGW (working
Area) or Equivalent make Nos 55 2940 161,700.00
f. 2 x 28 watts T5 Lamp Light fixture as per Wipro Cat No WVF 22228 SGW (working
Area) or Equivalent make Nos 0 -
f. 1 x 28 Watts T-5 lamp Channel light Fixture (Single & continuous row system). It shall
include the cost of making the continous row with necessary accessories. Make wipro
Make - Basic cost of light Rs. 4200- Nos 25 2940 73,500.00
g. 2 x 28 Watts T-5 lamp Indirect /direct Level Pendent Light Fixture ( Single & continuous
row system). It shall include the cost of making the continous row with necessary
accessories. Make Wipro Cat No. - Basic cost of light Rs. 6000/- Nos 0 -
h. 2 x 18 watts CFL Lamp Light fixture as per Wipro Cat No WCP- 27218 with glass cover
(Working Area)or Equivalent make Nos 110 1100 121,000.00
i Suspended round / Decorative Light fixture as per architect /Client Basic cost of light -Rs
3500 / Nos 6 2280 13,680.00
j Suspended square / Decorative Light fixture as per architect /Client Basic cost of light
Nos 10 3230 32,300.00
k 2 x 6 watts LED Light fixture as per Wipro Cat No LD43-012-XXX-WH-XX (Working
Area) or Equivalent make Nos 15 1900 28,500.00
l. 1 x 18 Watts CFL Light Wall washer light Fixture as per Keselec KAVA 1/18 Nos 0 -
m 2 x 18 watts CFL Lamp Light fixture as per Wipro Cat No WCP-27218 with glass cover
with digital dimmable ballastas (Working Area)or Equivalent make Nos 15 -
n Bollard light fixture as per wipro cat no-FBP-31118 or Equivalent make Nos 0 -
o Halomax HL 8022 LED Cove light complete with transformer and all fixing accessories as
required. RM 0 -
p LED Strips for Cove Light Rmt 10 -
q 2 x 8 Watts fluorescent non maintained lamp selft -contained emergency Exit light
Legrand Make Nos 0 -
r Supply & installation of Passive infra-red presence detector for lighting control of all
meeting rooms, cabin and toilet ( ON/OFF selection of lights)( Lights switch OFF in
steps of 1 minute) Nos 0 -
s Supply, installation, testing commissioning of recessed ceiling mounted photo cell
switching units to provide ON/OFF switching of lighting in response to ambient light levels.
1 Switches lighting OFF when sufficient daylight is present.
2 Used as on ON/OFF daylight dependant switch or in series with a wall switch
3 Lighting level adjustable up to 1500 lux approx. Nos. -
t. Receiving, storing, handling, assembling fixing in position, testing and commissioning of
special light fixture on ceiling or fully/semi recessed in ceiling complete with all fixing
accessories as required. Nos. -
u. Supply and fixing 8 Way Dimmar panel with MCB and Dimmar Module including making
connections etc as required. Nos. -
E. CABLES ,MAINS & SUBMAINS

1 Supply and laying, effecting proper connections, testing & commissioning of the following
sizes of 1.1 KV XLPE armoured/ unarmoured PVC insulated PVC sheathed aluminium
/copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable
Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in
ground /laid on Cable Trays including clamping the cables to supports in an approved
manner as required complete with all accessories.
a. 3 C x 185 sq.mm 11 Cable XLPE Cable RM 3320 -
b. 3.5 c x 300 sq.mm XLPE armourd aluminium conductor cable RM 1425 -
c. 3.5 c x 240 sq.mm XLPE armourd aluminium conductor cable RM 1330 -
d. 3.5 c x 185 sq.mm XLPE armourd aluminium conductor cable RM 1140 -
e 3.5 c x 95 sq.mm XLPE armourd aluminium conductor cable RM 570 -
f. 3.5 c x 70 sq.mm XLPE armourd aluminium conductor cable RM 520 -
g. 3.5 c x 50 sq.mm XLPE armourd aluminium conductor cable RM 45 465 20,925.00
h. 4 c x 25 sq.mm XLPE armourd aluminium conductor cable RM 425 -
i 4 c x 16 sq.mm armoured copper cable for UPS, Light and power DB's RM 200 465 93,000.00
j 4 c x 10 sq.mm armoured copper cable RM 570 -
k 4 c x 6 sq.mm armoured copper cable for A.HU RM 360 320 115,200.00
l 4 c x 4 sq.mm armoured copper cable RM 285 -
m 3 c x 4 sq.mm armoured copper cable RM 150 270 40,500.00
n 2 c x 16 sq.mm PVC insulated unarmoured copper conductor cables RM 40 370 14,800.00
o 2 c x 10 sq.mm PVC insulated unarmoured copper conductor cables RM 285 -
p 1c x 25 sq.mm PVC insulated PVC flexible copper conductor cables RM 380 -
q 1c x 35 sq.mm PVC insulated PVC flexible copper conductor cables RM 100 475 47,500.00
2 Supplying and making terminal joints for the following size of 1.1 KV PVC insulated copper
conductor armoured cables including providing heavy duty copper terminal crimping lugs,
solder, insulation tape, approved sealing epoxy compound, double compression brass
cable glands, effecting gland connections and effecting terminal connections to the
equipment complete as required.
a 3.5 c x 300 sq.mm XLPE armourd aluminium conductor cable for UPS input panel
Jt 1425 -
b. 3.5 c x 240 sq.mm XLPE armourd aluminium conductor cable for floor panel Jt 1140 -
c. 3.5 c x 185 sq.mm XLPE armourd aluminium conductor cable for floor panel Jt 1140 -
d. 3.5 c x 95 sq.mm XLPE armourd aluminium conductor cable Jt 950 -
f. 3.5 c x 70 sq.mm XLPE armourd aluminium conductor cable Jt 950 -
e 3.5 c x 50 sq.mm XLPE armourd aluminium conductor cable for PAC Jt 2 855 1,710.00
f 4 c x 25 sq.mm XLPE armourd aluminium conductor cable for Jt 760 -
g 4 c x 16 sq.mm armoured copper cable for UPS, Light and power DB's Jt 8 760 6,080.00
h 4 c x 10 sq.mm armoured copper cable Jt 710 -
i 4 c x 6 sq.mm armoured copper cable For A.C. Jt 18 475 8,550.00
j 4 c x 4 sq.mm armoured copper cable Jt 475 -
k 3 c x 4 sq.mm armoured copper cable Jt 6 425 2,550.00
l 2 c x 16 sq.mm PVC insulated unarmoured copper conductor cables Jt 2 475 950.00
m 2 c x 10 sq.mm PVC insulated unarmoured copper conductor cables Jt 425 -
n 1c x 25 sq.mm PVC insulated PVC flexible copper conductor cables Jt 380 -
o 1c x 35 sq.mm PVC insulated PVC flexible copper conductor cables Jt 18 380 6,840.00
F. RACEWAYS AND CABLE TRAYS

1 Fabricating supplying to site of installation, installation on ceiling/ surface 1.6 mm thick
M.S. powder coated raceways of height 40 mm and 2.0 mm thick openable cover, totally
enclosed, the joints between two lengths of channels or between channel and junction
box shall be joined together with 3 mm thick MS powder coated coupler plates to make it
dust and water proof. The cost shall including all supporting and fixing accessories
including dash fasteners.
a. 250 mm (wide) x 50 mm (height) RM 665 -
b. 150 mm (wide) x 50 mm (height) RM 20 570 11,400.00
2 Fabricating supplying to site of installation, in floor including chase cutting of floor,leveling,
refilling and making good the same 1.6 mm thick M.S. powder coated raceways of
height 40 mm and 2.0 mm thick openable cover, totally enclosed, the joints between two
lengths of channels or between channel and junction box shall be joined together with 3
mm thick MS powder coated coupler plates to make it dust and water proof.. complete with
all fixing accessories as required.
a. 150 mm (wide) x 40 mm (height) RM 1140 -
b. 100 mm (wide) x 40 mm (height) RM 200 570 114,000.00
c. 80 mm (wide) x 40 mm (height) RM 140 570 79,800.00
d. 55 mm (wide) x 40 mm (height) RM 150 475 71,250.00
3 Fabricating supplying to site of installation, 2 mm thick M.S. sheet steel power coated 5
sided junction boxes with 2.0 mm thick MS cover including providing rubber gasket
between the cover and the junction box, brass screws height as per site condition and
totally enclosed, welded. the channel and junction box shall be seam welded together to
make it dust and water proof. Proper cutouts shall be made in the side walls for raceway
entry.
a. 350 mm x 350 x 60 mm (height) Nos. 15 1900 28,500.00
b. 250 mm x 250 x 60 mm (height) Nos. 35 1425 49,875.00
c. 150 mm x 150 x 60 mm (height) Nos. 35 1150 40,250.00
d. 100 mm x 100 x 60 mm (height) Nos. 60 800 48,000.00
4 Design manufacture , supply and fixing in position the cable trays of the following sizes for
supporting 1.1 KV grade armoured/unarmoured aluminium /copper conductor cables.
Fabricate the cable trays from perforated 1.6/2mm thick M.S. CRCA sheet duly galvanised
with expansion coupler plates duly galvanised, with bolts, washer and nuts. Knock out
holes for cable connections as per approved design. The tray should comply with the
specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers
Association). The steel should be as per IS:226 and galvanising as per IS :2629/BS
729/ASTM 123. The rate shall also include for supporting steel , fish plates , fixing
accessories , nuts bolts, supporting down rods , dash fastener, cutting the RCC etc.
complete as required. (the horizontal and vertical bends, T's should be factory fabricated
and the rate should include for the same)
a. 150 mm wide x 40 mm x 1.6 mm thk RM 100 760 76,000.00
b. 300 mm wide x 40 mm x 2.0 mm thk RM 60 950 57,000.00
c. 450 mm wide x 40 mm x 2.0 mm thk RM 40 1330 53,200.00
d. 600 mm wide x 40 mm x 2.0 mm thk RM 1900 -
5 Design manufacture , supply and fixing in position the Ladder Type cable trays of the
following sizes for supporting 1.1 KV grade armoured/unarmoured aluminium /copper
conductor cables. Fabricate the cable trays to from Ladder Type 2.0 mm thick M.S. Flat/
Angle iron with bolts, washer and nuts. as per approved design. The tray should comply
with the specification of NEC (National Electric Codes) and NEMA (National Electric
Manufacturers Association). The steel should be as per IS:226 and galvanising as per IS :
2629/BS 729/ASTM 123. The rate shall also include for supporting steel ,jointing fish
plates , fixing accessories , nuts bolts, supporting down rods, dash fastener, cutting the
RCC etc. complete as required.
a. 300 mm wide x 50 mm x 2.0 mm thk RM 1425.00 -
b. 600 mm wide x 50 mm x 2.0 mm thk RM 2090.00 -
G. DISTRIBUTION BOARDS
1 Supply,inginstalling ,connecting testing and commissioning of the following double door

1/4 rows vertical type 1.6 mm thick and 1.4 mm thick door sheet steel enclosed fully
recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin
proof, with hinged and lockable doors complete with DP MCB's and inter-connection with
copper wires, or copper tapes, cable glands/conduit entry bushes, bonding to earth and
painting. Also provide separate neutral busbar for each phase. Provide separate Earth
Links. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows
for 3 phase. Provide separate 4 way 63 A main neutral link also.
1 Light & Power Distribution Board
a. 8+2 Way TPN DB, each phase consisting of 6 Nos. 10/20 AMP SP MCB’s and controlled
by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63 Amps 4
pole MCB. Nos.. 1 19000 19,000.00
b. 10+2 Way TPN DB, each phase consisting of 8 Nos. 10/20 AMP SP MCB’s and controlled
by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63 Amps 4
pole MCB. Nos.. 2 23750 47,500.00
c. 12+2 Way TPN DB, each phase consisting of 10 Nos. 10/20 AMP SP MCB’s and
controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63
Amps 4 pole MCB. Nos.. 1 24700 24,700.00
2 UPS Distribution Boards (All MCB's in UPS DB's should be D Curve)
a. 8+2 Way TPN DB, each phase consisting of 6 Nos. 10/20 AMP SP MCB’s and controlled
by one number 63 AMPS DP MCB for each phase and 1 no. 63 amps 4 pole MCB incomer Nos.. 22800 -
b. 10+2 Way TPN DB, each phase consisting of 8 Nos. 10/20 AMP SP MCB’s and controlled
by one number 63 AMPS DP MCB for each phase and 1 no. 63 amps 4 pole MCB
incomer Nos.. 1 24700 24,700.00
c. 12+2 Way TPN DB, each phase consisting of 10 Nos. 10/20 AMP SP MCB’s and
controlled by one number 63 AMPS DP MCB for each phase and 1 no. 63 amps 4 pole
MCB incomer Nos.. 1 26600 26,600.00
d. 6 Way SPN DB, consisting of 6 Nos. 10 AMP SP MCB’s and controlled by 1 no 63 Amps
DP MCB. Nos.. 3 9500 28,500.00
3 Supply, installation, testing and commissioning of sheet metal enclosed 100 A TPN
MCCB (35 KA) for 30 KVA UPS.(This shall include cable entry boxes both for incoming
and outgoing cable) Nos. 1 11400 11,400.00
4 Supply, installation, testing and commissioning of sheet metal enclosed 63 A DP MCB (10
KA) for 8 KVA UPS.(This shall include cable entry boxes both for incoming and outgoing
cable) Nos. 1 1900 1,900.00
5 Supply, installation, testing and commissioning of 1.6 mm thickness sheet metal
enclosures fitted with 32 A TPN MCB for AHU Unit Nos. 5 2850 14,250.00
6 Supply, installation, testing and commissioning of weather proof 1.6 mm thickness sheet
metal enclosures fitted with 32 A TPN MCB for A.C Unit Nos. 4 2850 11,400.00
7 Supply, installation, testing and commissioning of weather proof enclosures fitted with
125 A TPN MCCB for VRV Nos. 9500 -
8 Supply, installation, testing and commissioning of weather proof enclosures fitted with 25
A DP MCB for Split 1.5 /2.0 TR AC Unit Nos. 3 3800 11,400.00
h. PUBLIC ADDRESS SYSTEM

1 Providing and fixing in position the following FRLS PVC conduits including all conduit
accessories concealed in false ceiling/ceiling as required including 5 sided 1.6mm thick RM 350 115 40,250.00
a. 20 mm dia conduit
M.S. junction boxes and 3mm thick perspex sheet cover plate complete with G.I. pull wires
b. 25the
in mmrundiaofconduit
conduit. RM 65 145 9,425.00
2 Providing and fixing in position the following G.I. flexible conduits including all
accessories
a. 1.6mmwall thickness 20mm dia RM 80 55 4,400.00
3 Supply, installation, testing and commissioning of following Philips (BOSCH) make Music
Accessories/Equipments.
a. Ceiling Speaker Unit 6 Watts LHM 0606/10 Nos. 40 1330 53,200.00
b. Power Amplifier, 120 Watts with output transformer etc. complete. AHUJA Nos. 20000 -
c. Power Amplifier, 320 Watts with output transformer etc. complete. Nos. 1 23750 23,750.00
d Plena Voice Alarm Router Nos. 2500 -
e 3 DVD player Philips/Samsung. Nos. 1 24700 24,700.00
f Control Unit (with volume and on/off switch) Philips ( Smooth stepless control, but the Nos. 21 1420 29,820.00
control shall be through dimmer switch, the make of which will be same as the make of Nos. 24000 -
g 6 Zone call station ( Bosch Make)
light control switches )
h Philips Microphone unit Nos. 1 6650 6,650.00
i Equipment Rack complete with monitor unit, speaker, power supply control etc. suitable for Nos. 1 4750 4,750.00
2no 320 watts amplifier sets for all floors. Philips Make
j Equipment Rack complete with monitor unit, speaker, power supply control etc. suitable for
2no 200 watts amplifier sets for all floors. Philips Make Nos. 3000 -
k Main Termination Box Nos. -
4 Supply and drawing of 1.5 sq. mm ATC Twin Core shielded Speaker Cable in existing RM 550 150 82,500.00
conduit
i. FIRE DETECTION SYSTEM (ADDRESSABLE)

1 Providing and fixing in position the following MS conduits including all accessories
concealed in False ceiling/walls/partitions as required including 5 sided 1.5mm thick M.S. RM 525 145.0 76,125.00
a. 20mm dia (1.6 mm thick)
junction boxes and 3mm thick perspex sheet cover plate complete with G.I. pull wires.
b. 25 mm dia (1.6 mm thick) RM 40 165.0 6,600.00
2 Providing and fixing in position the following G.I. flexible conduits including all
accessories RM 100 60.0 6,000.00
a. 20 mm dia (1.6 mm thick)
b. 25 mm dia (1.6 mm thick) RM 70.0 -
3 Providing and fixing in position 1.6mm thick M.S. outlet boxes for housing smoke
detectors/heat detectors including providing 3 mm thick hylam sheet cover as required.

a. 75mm x 75mm x 75mm Nos 5000.0 -
4 Supply and drawing of the following FRLS PVC insulated copper conductor wires in
existing conduits. RM 680 75.0 51,000.00
a. 2 x 1.5 sq. mm shielded ATC conductor loop cable
b. 2 x 2.5 sq. mm shielded ATC conductor loop cable RM 100.0 -
5 Supply, installation, connecting, testing and commissioning of addressable photoelectric
type Smoke Detectors with mounting base, blinking LED etc. complete as required. Nos 52 2185.0 113,620.00
6 Supply, installation, connecting, testing and commissioning of addressable ionization type
Smoke Detectors with mounting base, blinking LED etc. complete as required Nos 2400.0 -
7 Supply, installation, connecting, testing and commissioning of addressable rate of rise
cum fixed temperature Heat Detectors with mounting base, blinking LED etc. complete as
required. Nos 2 1900.0 3,800.00
8 Supply, installation, connecting, testing and commissioning of Addressable Hooters
min.80 db output Nos 4 18050.0 72,200.00
9 Supply, installation, connecting, testing and commissioning of Addressable Manual Call
Box in ABS plastic as required complete. Nos 4 475.0 1,900.00
10 Supply, installation, connecting, testing and commissioning of Response indicator.
Nos 500.0 -
11 Supply, installation, connecting, testing and commissioning of addressable fault Isolator
Nos 6 570.0 3,420.00
12 Supply, installation, connecting, testing and commissioning of addressable control module Nos 10 6175.0 61,750.00
13 Supply, installation, connecting, testing and commissioning of 1 Loop multiprotocol analog Set 1 14250.0 14,250.00
addressable panel (networkable type) with auto dialer ( min. 6 line), serial printer and
ground isolator card for printer etc. complete as required. The Fire Panel shall also have
j. SUB-DISTRIBUTION BOARDS
1 Sub Distribution Panels
Design, manufacture, supplying at site of the following cubical type, dead front, 2mm thick
sheet steel enclosed, free standing indoor type extendible Sub Distribution Panel with
a. The Sub Distribution Board for UPS shall consists of :
vermin proof hinged lockable doors for each compartment provide bus bar
INCOMER
interconnections for incoming and outgoing including feeders earthing and painting and as
per
Mainspecifications.
Incomer 1 no 100 A T P MCCB ( 35 KA) and neutral isolation link 200% of rated
current. Terminals suitable to receive 5 x 1 x 35 sq. mm copper cable connection ( 1 nos
per phase and 2 nos. for neutral) on one side and Busbar connection on the other side.
BUSBARS
200 amps 3 pole busbar and 300 amps for neutral, chamber of suitable length with
Copper busbars. All busbars and interconnections shall be of suitable size copper strips
current density of copper shall not be more than 1.6 Amps/ sq.mm.
INDICATING PANEL
3 nos phase indicating lamps (LED type) each backed up with MCB and switch shall be
provided for each incomer.
Provide L&T make Intelligent Panel Meter - Quasar (96 mm x 96 mm) covering 25
electrical parameters for incomming feeder
OUTGOINGS
3 Nos. 63 A DP MCB ( 10 kA) suitable to receive 2 x 16 sq. mm copper cable.
5 Nos.63 A 4P MCB (10 kA) suitable to receive 4 x 16 sq. mm copper cable.
The Sub Distribution Board for UPS as described above and specifications complete Set 1 95000 95,000.00
b. The VTPN DB-1 For A.C shall consists of :
INCOMER
Main Incomer 1 no 100 A T PN MCCB ( 35 KA) ,Terminals suitable to receive 3.5X70 sq.
mm copper cable connection on one side and Busbar connection on the other side.
BUSBARS
200 amps 3 pole busbar and 300 amps for neutral, chamber of suitable length with
Copper busbars. All busbars and interconnections shall be of suitable size copper strips
current density of copper shall not be more than 1.6 Amps/ sq.mm.
INDICATING PANEL
3 nos phase indicating lamps (LED type) each backed up with MCB and switch shall be
provided for each incomer.
OUTGOINGS
4 Nos. 32 A DP MCB ( 10 kA) suitable to receive 2 x 16 sq. mm copper cable.
11Nos.32 A TPN MCB (10 kA) suitable to receive 4 x 6 sq. mm copper cable.
The VTPN DB-1 for AC as described above and specifications complete Set 1 87400 87,400.00
2 Receiving,shifting to site of installation, assembling, installing in position, connecting,
testing and commissioning of the following electrical panels as per specifications complete
a. Main L.T. Panel Set 2,000.00 -
as required.
b. VTPN DB Set 1 4,750.00 4,750.00
c. UPS -SDB Set 1 3,800.00 3,800.00
3 Providing & fixing in position 1000 mm wide , Electrical Insulating Mats as per IS
15652:2006, 2mm thick, suitable upto 3.3 KV , fire retardant,no effect of acids, alkalies and
transformer oils, moisture proof, high tensile strength and texture finish / cloth impression
(Anti slip , marking on top) Duratuf make RM 4 1,900.00 7,600.00
4 Supply & fixing in position approved shock treatment chart written in English Hindi and
Local language., These charts shall be framed in wooden frame & covered with clear
glass Nos 1 2,000.00 2,000.00
5 Supply & fixing in position First Aid Boxes of approved shape and size as required by the
local Electrical Inspecting Authority. Set 1 2,850.00 2,850.00
6 Supply & fixing in position fire buckets (5 Nos.) duly filled with dry fine sand & fixed on
Angle iron frame as required. The fire buckets shall be painted Red from outside & white
from inside, one handle at the bottom to hold complete Set 10,000.00 -
7 Supply & fixing in position the best quality danger notice boards of approved shape & size
as reqd. by the local Electrical Inspecting Authority written in English, Hindi & local
language. ( for 440 Volt & 11000 Volt) Nos 1 1,425.00 1,425.00
8 Supply of Tool Box with all necessary tools for maintenance of electrical installation
Set 1 11,400.00 11,400.00
9 Thermal Imaging to be done for all the Panels including the busbars, cable joints etc. after L.S. 1.0 9500.0 9,500.00
all the connections have been done and before and after final commissioning.
10 Health Checking to be done for the existing Panels etc as complete required. L.S. 1 19000.0 19,000.00
k. CCTV SYSTEM
1 Supply,Installation Testing & Commissioning of 1/3" Color CCD ,480 TVL,0.1 lux (F1.2),
DC iris varifocal 4-9 mm , internal Sync, DC 12 v, Nos 6 2090.0 12,540.00
2 Supply , Installation Testing & Commissioning of 1/3" Super HAD CCD,5 530 TVL, 0. 1 lux,
Motion Detection, with 1/3" CS-Mount , DC Auto iris, 530 TVL, 2. 5- 10 mm Varifocal Lens
FO.95, Long Lead with Housing Indoor type Set 2600.0 -
3 Supply , Installation Testing & Commissioning of Dome, Day/Night, High Speed PTZ ,
Optical 25x or more , Digital 8x, 530 TVL, 1.0 lux F1.2, 0.1 lux (B/W), 0.01 lux (Digital
Slow Shutter), Line Lock Sync., Multi-protocol, 8-Alarm-in / 4-out, AC24V, PAL,Pendant
Type IP 66 outdoor housing Set 4500.0 -
4 Supply ,Installation Testing & Commissioning of PTZ controller with joystick, LCD display,
for individually or collectively controlling the cameras Set 15000.0 -
5 Supply , Installation Testing & Commissioning of 8 Channel Digital Video Surveillance
System, record rate 200 FPS – record and viewing, with built in Multiplexer, Video motion
detection, smart search with TCP – IP connectivity, recording on real time , with minimum 4
TB HDD , to record for 15 days Nos 1 5700.0 5,700.00
6 21" TFT Monitor (Make -Samsung / LG / Sony) Nos 1 14250.0 14,250.00
7 Power supply module with battery backup for 24 hour operation of entire system Nos 1 4750.0 4,750.00
8 Supplying & laying, testing and commissioning of RG-6, cable in existing FRLS PVC
conduit . RM 300 65.0 19,500.00
9 Supply & laying of 3 x 1.5 sq. mm PVC insulated copper conductor cable RM 200 140.0 28,000.00
concealed in False ceiling/walls/partitions as required including 5 sided 1.5mm thick M.S.
junction boxes and 3mm thick perspex sheet cover plate complete with G.I. pull wires.
a. 1.6mmwall thickness 20mm dia RM 150.0 -
b. 1.6mm wall thickness 25 mm dia RM 450 190.0 85,500.00
l. ACCESS CONTROL SYSTEM
Supply, installation,Testing & commissioning

1 Door Controllers to be suitable for
a. 4 Nos. Doors with 8 Readers & 4 nos Exit Button Nos 1 15200 15,200.00
2 HID make Prox Pro Proximity Card Reader Model No. 6005 as per specifications Nos 7 8550 59,850.00
3 HID make mini Prox Pro Proximity Card Reader with keypad as per specifications
Nos 1 2850 2,850.00
4 Electromagnetic Locks - 650 lbs as per specifications Nos 1 2565 2,565.00
5 Supply and installation - Double Leaf Electromagnetic Locks - 650 lbs as per specifications
-GEM make Nos 1 3800 3,800.00
6 Magnetic Door Contacts Nos 5 180 900.00
7 Egress Switch buttons Nos 4 330 1,320.00
8 Emergency Break Glass Nos 4 380 1,520.00
9 Piezo Buzzer Nos 4 425 1,700.00
10 Panic Bar with Local Audio Alarm(80 dB) powered by 230 volts. It shall include connectivity
till main controller Nos 1 1710 1,710.00
11 Standard Thickness Proximity Cards Prox II Make HID (Blank Faced) with option of
printing directly on card complete as per specification. The cost shall include printing on
both sides based on input given by the Client. Nos 125 285 35,625.00
12 On line time & attendance software with first IN and Last OUT entry set 1 1330 1,330.00
13 Supplying and laying of FRLS multi core shielded flexible PVC insulated copper conductor
wires in existing PVC conduit complete with cable terminations
13a 8 core - Controller to Card Reader metre 450 35 15,750.00
13b 4 core - Controller to E.M. Lock, contact, sensor, exit push button, Buzzer etc. metre 225 20 4,500.00
14 Supply and laying of 25 mm dia FRLS PVC conduit complete with support
brackets/clamps, junction boxes etc. complete. metre 600 150 90,000.00
TOTAL 238,620.00
BOQ FOR HVAC WORK
SUMMARY
S. No. Description Amount
1 EQUIPMENT 526,120.00
2 PIPING AND VALVES 487,170.00
3 DUCTWORK/AIR TERMINALS 1,390,437.50
4 INSULATION 769,325.00
5 ELECTRICAL WORKS 84,725.00
Grand Total 3,257,777.50
S.NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT
1.0 EQUIPMENT
1.1 AIR HANDLING UNITS (AHUs)
1.1 EXISTING CEILING SUSPENDED TYPE AHUs
Dismentaling, Re-Installation, Testing and Commissioning of existing
double skin ceiling suspended type air handling units having following
details. Suspension arrangement for ceiling suspended AHUs shall
also include spring type vibration isolators and rubber groomets etc. to
make the installation totally vibration free. Quoted price shall be inclusive
of making necessary modifications in terms of its motor rating and pulley
design to achieve Static Pressure in the region of 35mm as against
30mm as furnished, which seems to be on the lower side. Cost shall
also be inclusive of relocating the electrical starter panels, TPN switches
& associated cable termination.
a. Make : Edgetech
b. Capacity : 1x6000 Cfm & 4x4000 Cfm/SP-30mm each
6000 cfm No 1 32,390 32,390.00
4000 cfm No 4 28,000 112,000.00
AHUs as described above. -
1.1.2 Ceiling Suspended type AHUs - New
Supply, Installation , Testing and Commissioning of double skin ceiling
suspended type air handling units in sheet metal construction, Inner
skin shall be constructed out of 24 gauge plain GS sheet & outer skin in
24 gauge pre-plasticized GS sheet sandwitched between 25mm thick
injected PU foam insulation of density not less than 40 Kg /CuM and
complete with inspection doors, each complete with synthetic fibre
filters, multirows deep chilled water coil of copper tube having
wall thickness of tubes not less than 0.5mm and aluminium fins
construction, forward curved DIDW centrifugal fan/s,belt drive
package, EFF1 TEFC squirrel cage induction motor, SS insulated
auxiliary drain pan,separate compartment for housing all valves and
vibration isolation arrangement all complete as per the
specifications. AHU shall be selected for a maximum face velocity of
500 FPM. Fan outlet velocity shall not exceed 1800 FPM. Suspension
arrangement for ceiling suspended AHUs shall also include spring
type vibration isolators and rubber groomets etc. to make the installation
totally vibration free. AHUs shall be of following design parameters :
AHU No Capacity S.P Motor Rows of Area to
(Cfm) (mmWG) Rating coil be fed (HP)
AH-6/Breakout 2400 36 2 6 Breakout Area-4F No. 1 94,700 94,700.00
1.2 SPLIT PACKAGES
Supply,Installation, Testing & Commissioning of split type
airconditioning units, each comprising of an outdoor and single
indoor unit. Condensing unit shall be complete with scroll
compressor, air cooled condenser with fan. Evaporating unit
shall consist of a fan section with dynamically balanced
centrifugal fans driven by FHP motor, multirows deep
copper cooling coil with aluminium fins, thermostatic expansion
valve valves etc. Enclosures shall be fabricated as specified.
The evaporating unit shall be equipped with synthetic
fibre filters, insulated drain pan, safety controls, thermostat
all complete in a unit.The enclosure shall be factory painted to
a smooth finish. The quoted price shall be inclusive of full
charge of refrigerant gas, vibration isolation pads etc.
A. Three phase Non- ductable split units with scroll compressor
a. 3TR nominal capacity, split unit with single high wall non-
ductable indoor unit with scroll compressor including one
standby.Price shall be No -
inclusive of copper power cabling from indoor to outdoor unit.
b. 2.2TR nominal capacity, split unit with single high wall non-
ductable indoor unit with scroll compressor including one
standby.Price shall be No -
inclusive of copper power cabling from indoor to outdoor unit as
required. (For UPS room, Daikin Make-one standby)
B. Single phase Non- ductable split units with rotary compressor
(Five Star Rating)
a. 2TR nominal capacity, split unit with single Hi-wall type indoor
unit and cordless control including one standby . Price shall
No -
be inclusive of copper power cabling from indoor to outdoor unit as
required. (For Break Out Area)
e. 1.5TR nominal capacity, split unit with single Hi-wall type
indoor unit and cordless control including one standby . Price
No - Rate Only
shall be inclusive of copper power cabling from indoor to outdoor unit
as required.
1.2.2 SPLIT UNITS WITH WATER COOLED CONDENSERS
1.2.2 Three/Single phase Non- ductable split units with scroll/Rotary
compressor :
a.
3TR nominal capacity, split unit with single Ceiling air handler type No. 1 104,500 104,500.00
non-ductable indoor unit and cordless control.Price shall be inclusive of
copper power cabling from indoor to outdoor unit. (For Server room
b.
2TR nominal capacity, split unit with single Ceiling air handler type
non-ductable indoor unit and cordless control.Price shall be inclusive of No. 1 80,750 80,750.00
copper power cabling from indoor to outdoor unit.(For UPS room)
1.3 REFRIGERANT PIPING

Supply, Installation,Testing & Commissioning of copper refrigerant
piping complete with copper fittings & refrigeant gas charge for the
above split units.Piping associated with split units to be insulated with
closed cell elastomeric insulation in tubing form as required. Piping shall
be laid over duly painted slotted angle trays fixed with GI clamps.Quoted
Price shall be inclusive of UV rotection paint for all exposed pipes of
approved make .
a. Pair of hard drawn copper refrigerant piping for split packages with
RM 10 830 8,300.00
scroll compressor.
b. Pair of hard drawn copper refrigerant piping for split packages with
RM 50 785 39,250.00
roatary compressor.
1.4 Supply, Installation , Testing and Commissioning of PLC for
Auto Sequencing of Split units with micrprocessor based controller
along with enclosure/accessories having facility for configuration of
the same as per requirement for sequenced Start/Stop for following
split units :
a. Two number Split units including one standby for Server Room
Set 0 -
and UPS Room.
1.5 VENTILATION FANS
1.5.1 INLINE FANS (Single Phase)
Supplying , Installaing , Testing and Commissioning of
circular/rectangular inline fans for exhaust complete with sheet metal
casing, direct driven centrifugal fan, motor with proper protection and
inspection door. Fan shall be suitable for operation on 220+6 % volts,50
Hz,1phase AC power supply.Fan shall be installed as shown in the
drawings and will be of following characteristics. All single phase inline
fans shall be provided with factory fitted speed regulators.:
Fan Capacity S.P Area to
No.(Cfm) (mmWG) to be exhausted
IF-1 (Circular) 200 10 Director's Toilet No 1 8,550 8,550.00
IF-2 (Circular) 150 10 Pantry No 1 7,980 7,980.00
IF-3 (Circular) 400 10 Large Toilet No 1 12,350 12,350.00
IF-4 (Circular) 250 10 Breakout No 1 17,100 17,100.00
1.6 MS FRAME FOR OUTDOOR UNITS
Supply and Erection of MS base farme duly applied with red-
oxide primer & followed by black enamel paint for mounting of Kg. 50 165 8,250.00
outdoor units.
PMENT) TOTAL
Rs. CARRIED TO SUMMARY 526,120.00
2.0 PIPING AND VALVES

2.1 CHILLED WATER PIPING
Supplying , Installaing , Testing and Commissioning of MS heavy class
(Class "C') pipes cut to requird lengths and installed with all welded
joints. Quoted price shall be inclusive of supply and fixing in
position the necessary fittings like elbows, tees reducers, sockets
etc., and hanging arrangement including treated wooden
saddles,washers and check nuts etc in accordance with the approved
shop drawings and specifications.Pipes shall be of following sizes :
a. 65mm dia RM - Rate Only

b. 50mm dia RM 30 1,110 33,300.00
c. 40mm dia RM 85 875 74,375.00
d. 32mm dia RM 10 800 8,000.00
e. 25mm dia RM - Rate Only
f. 20mm dia RM - Rate Only
2.2 Dismantling of existing chilled water piping as required at site. RM 30 425 12,750.00
2.3 Re-installaing , Testing and Commissioning of existing MS heavy class
shop drawings and specifications.Pipes shall be of followingsizes :
a. Chilled water pipe size shall be as exist at site. RM 30 680 20,400.00

2.4 CONDENSER WATER PIPING
Supplying , Installaing , Testing and Commissioning of MS heavy class
shop drawings and specifications.Pipes shall be of following sizes :
a. 65mm dia RM -
b. 50mm dia RM 25 1,110 27,750.00
c. 40mm dia RM 35 875 30,625.00
2.4 CONDENSATE DRAIN PIPING -
Supply, Installation , Testing and Commissioning of GI medium class
(Class 'B') pipes cut to requird lengths and installed with all screwed
joints for condensate drain. Quoted price shall be inclusive of
supply and fixing inposition the necessary fittings like elbows,
tees reducers etc., and porting arrangement in accordance with the
approved shop drawings and specifications.Pipes shall be insulated
with 9mm thick closed cell elastomeric insulation in tubing form . Pipes
shall be of following sizes :
a. 50mm dia RM - Rate Only
b. 40mm dia RM 20 570 11,400.00
c. 25mm dia RM 60 520 31,200.00
2.5 Dismantling, Re-installation , Testing and Commissioning of existing
valve station for each air handling unit. Quoted price shall be
inclusive of 25mm thick closed cell elastomeric insulation coverd with Sets 5 5,025 25,125.00
glass cloth & UV
protection paint.
2.6 BUTTERFLY VALVES
Supply , Installation , Testing and Commissioning of following Butterfly
Valves in accordance with the approved shop drawings and
specifications.
a. 65mm dia No - Rate Only
b. 50mm dia No 2 5,935 11,870.00
c. 40mm dia No 8 4,890 39,120.00
2.7 BALANCING VALVES
Supplying , Installaing , Testing and Commissioning of following
Balancing Valves in accordance with the approved shop drawings
and specifications.
a. 65mm dia No - Rate Only
b. 50mm dia No - Rate Only
c. 40mm dia No 3 5,600 16,800.00
d. 30mm dia No - Rate Only
e. 25mm dia No - Rate Only
2.8 GATE VALVES
Supplying , Installaing , Testing and Commissioning of following Gate
specifications.
a. 50mm dia No 2 4,275 8,550.00
b. 40mm dia No 2 3,800 7,600.00
c. 32mm dia No - Rate Only
d. 25mm dia No - Rate Only
2.9 BALL VALVES (for AHUs)
Supplying , Installaing , Testing and Commissioning of following Ball
specifications.
a. 40mm dia No 2 3,800 7,600.00
b. 32mm dia No - Rate Only
c. 25mm dia No - Rate Only
2.10 3 WAY /2 WAY DIVERTING VALVES (for AHUs )
Supplying , Installaing , Testing and Commissioning of motorised 3
way/2way diverting valves with modulating motor, proportional
thermostat and copper control wiring for air handling units. The
valves shall be of the following sizes :
a 50mm dia valves No -
b 40mm dia valves No -
c 32mm dia valves No 1 24,225 24,225.00
d 25mm dia valves No -
e 20mm dia valves No -
2.11 AUTO PURGE VALVES
Supplying , Installaing , Testing and Commissioning of 10mm dia
No 5 1,890 9,450.00
automatic purge valves.
2.12 Y- STRAINER FOR AHUs
Supplying , Installaing , Testing and Commissioning of following 'Y'-
strainers for air handling units.
a 65mm dia No -
b 50mm dia No -
c 40mm dia No 3 5,210 15,630.00
d 30mm dia No -
2.13 THERMOMETERS
Supplying , Installaing , Testing and Commissioning of 100mm dia dial
No 16 1,425 22,800.00
type thermometers as per the specifications.
2.14 PRESSURE GAUGES
Supplying , Installaing , Testing and Commissioning of industrial type
pressure gauges completely in stainless stainless steel (SS) No 16 1,660 26,560.00
construction as per the specifications.
2.15 TEST POINTS
Supplying and fixing in position of approved make Test Points
comprising of accessories such as adaptors, needle etc. Test points shall
be in brass metal construction and comprise of 1/4" BSP with No 6 2,470 14,820.00
neoprene sealing bushes and screwed covers. Test Points shall be
installed at inlet and outlet of each ceiling suspended AHUs.
2.17 FLOW SWITCHES
Supplying , Installation , Testing and Commissioning of approved
make flow switches complete with copper control wiring at outlet line Sets 2 3,610 7,220.00
of coolersassociated with each water cooled split unit.
TOTAL CARRIED TO SUMMARY 487,170.00
3.0 DUCTWORK/AIR TERMINALS

3.1 FACTORY FABRICATED DUCTING
Supply , Installation and Testing of factory fabricated GSS ducting
complete with vanes,splitter dampers, fire retardant gaskets hanging
arrangement including fully threaded GI rods and GI "C"
channels in accordance with the approved shop drawings and
specifications.Quoted price shall be inclusive of necessary scaffolding
charges towards installation of supply/exhaust air ducts outside or
within building wherever required.
a 1mm to 750mm -- 26G GSS with C&SS Joints Sqm 410 875 358,750.00
b 751mm to 899mm -- 26G GSS with TDC Joints Sqm 80 930 74,400.00
c 900mm to 1500mm -- 24G GSS with TDC Joints Sqm 30 1,045 31,350.00
d 1501mm to 1800mm - 22G GSS with TDC Joints Sqm 25 1,400 35,000.00
e 1801mm to 2100mm - 20G GSS with TDC Joints Sqm 40 1,765 70,600.00
f 2101mm to 2700mm - 18G GSS with TDC Joints Sqm -- Rate Only
3.2 SITE FABRICATED DUCTING
Supply,Fabrication, Installation and Testing of sheet metal ducts
complete with vanes,splitter dampers, hanging arrangement in
accordance with the approved shop drawings and specifications
a 0.63mm (24 gauge) GSS Sqm 20 875 17,500.00
b 0.8 mm (22 gauge) GSS Sqm 20 1,020 20,400.00
c 1.0mm (20 gauge) GSS Sqm 10 1,225 12,250.00
d 1.25mm (18 gauge) GSS Sqm -- Rate Only
3.3 FLEXIBLE CANVASS CONNECTIONS
Supply, Installation , Testing of 125mm deep antivibration flexible joints
at the outlet of packaged units/inline fans. Flexible connections
RM 17 2,830 48,110.00
shall be constructed using imported fire retardant fabric with extruded
aluminium frame/flange on both sides of approved make.
3.4 LINEAR GRILLES
Supply, Installation , Testing and Balancing of one way blow linear
supply cum return air grilles complete with removable/fixed core as
per approved shop drawings and specifications.The grilles shall be
of approved colour & shade.
Powder coated aluminium grilles of extruded sections with integral
flanges on both sides & ends as required complete with corner pieces.
i. 100/150/250 mm High grilles Sqm 17 8,070 137,190.00
3.5 AIR TRANSFER GRILLES
Supply, Installation and Testing of extruded aluminium powder
Sqm 0.5 13,775 6,887.50
coated air transfer grilles to be provided at the door of toilets/pantry.
3.6 SUPPLY AIR DIFFUSERS
3.6.1 Supply, Installation, Testing and Balancing of square supply air &
toilet exhaust air diffusers with removable key operated volume control
dampers as per the approved shop drawings and
specifications.The diffusers shall be anti-smudge ring type/flat type as
approved by the interior designer.
Powder coated extruded aluminium diffusers of approved colour &
Sqm 0.5 9,310 4,655.00
shade.
3.6.2 Supply, Installation, Testing and Balancing of square supply air
diffusers with factory fitted removable key operated volume control
dampers & 150mm high GSS plenum as per the approved shop
drawings and pecifications.The diffusers shall be anti-smudge ring /flat
type.
600x600 Powder coated extruded aluminium diffusers of approved
No 29 3,610 104,690.00
colour & shade suitable for fixing in grid ceiling.
3.7 RETURN AIR DIFFUSERS
3.7.1 Supply, Installation,Testing and Balancing of square return air
diffusers same as supply air diffusers but without volume control
dampers as per the approved shop drawings and specifications.
The diffusers shall be anti -smudge ring type.
Powder coated extruded aluminium diffusers of approved colour &
Sqm 0.5 8,070 4,035.00
shade.
3.7.2 Supply, Installation,Testing and Balancing of square return air
diffusers same as supply air diffusers but without volume control
dampers as per the approved shop drawings and specifications.
The diffusers shall be anti -smudge ring /flat type.
600x600 Powder coated extruded aluminium diffusers of approved
colour & shade suitable for fixing in grid ceiling. No 18 2,660 47,880.00
3.8 Supply, Installation, Testing and Balancing of lilear slot

diffusers with Hit & Miss type extruded aluminium volume
control dampers at supply air outlets as per the approved shop
drawings and specifications.
a 2/3 slot, powder coated extruded aluminium diffusers of approved
Sqm 6 18525 111,150.00
colour & shade for supply air with Hit & Miss type dampers
b 2/3 slot, powder coated extruded aluminium diffusers of approved
Sqm 12 14725 176,700.00
colour & shade for return air without Hit & Miss type dampers
3.9 Supply, Installation,Testing and Balancing of flexible ducting
comprising of inner as well as outer skin constructed out of aluminium &
fibre glass insulation sandwitched in between.
a. 300 mm dia RM 16 645 10,320.00
b. 250 mm dia RM 10 640 6,400.00
c. 200 mm dia RM 28 615 17,220.00
d. 150 mm dia RM -- Rate Only
3.1 Supply, Installation and Testing of single piece GI round spigot
made out of spinning process with 50mm height and having grooves on
both sides and circular flanges. Spigots shall be installed on main ducts
to facilitate connection of flexible ducts.
a. 300 mm dia No 12 475 5,700.00
b. 250 mm dia No 8 425 3,400.00
c. 200 mm dia No 22 340 7,480.00
d. 150 mm dia No -- Rate Only
3.11 Supply, Installation and Testing of GI box type volume control
dampers as per the specifications and shop drawings. Sqm 3 7,410 22,230.00
3.12 Supply, Installation and Testing of GI multi blade type louver

dampers as per the specifications and shop drawings. Sqm 9 4,655 41,895.00
3.13 Supply, Installation,Testing and Commissioning of motorised fire

dampers suitable for at least 90 minutes fire rating as per the
specifications and approved shop drawings. Quoted price shall be
inclusive of copper control wiring as required.
a. Bare Fire Dampers Sqm -- Rate Only

b. Spring return action type actuator complete with control panel and
No -- Rate Only
temperature sensor.
3.14 Supply, Installation and Testing of fresh air grilles of powder coated /
anodised extruded aluminium with GI wire mesh, inlet
Sqm 0.5 12,820 6,410.00
louvers,dampers & bird screen, as per the approved shop drawings
and specifications.
3.15 Supply, Installation and Testing of extruded aluminium powder coated
louver with GI wire mesh to be installed outside for exhaust air from
exhaust fans as per the specifications and shop drawings.
Sample of louvers to be got approved from consultants and Clients prior
Sqm 0.5 15,670 7,835.00
to procurement.
3.16 THERMAFUSERS (VAV DIFFUSERS)
Supply , Installation , Testing and Commissioning of thermally powered
Thermafusers model TF-C unless otherwise specified otherwise all
complete VAV terminal and thermostat/actuator self contained in a
nominal 600x600 square diffuser.The Thermafuser shall vary the supply
air volume to provide VAV cooling using one room sensing thermostat.
The damper shall be of blade type. The thermafuser shall be suitable for
ceiling mounetd and suitable to adjust temperature in a range of 21 to
26C. Quoted price shall be inclusive of digital wall adjustor, transformer
and copper control wiring to be laid in MS conduit as required. ( Vendor
to ensure setting/adjustment of supply air temperature according to the
User requirement.
Thermafusers as described above
i 4 Slot 2 Way Linear diffusers(160mm Wide)
1500mm Long - for 600Cfm No
900mm Long No --
ii 2 Slot 1 Way Linear diffusers(95mm Wide)
1500mm Long No --
900mm Long No --
BUTION) TOTAL
Rs.CARRIED TO SUMMARY 1,390,437.50
4.0 INSULATION
4.1 ACOUSTIC LINING OF DUCTS
Supply and Application of internal acoustic lining of supply air
ducting as per the approved shop drawings and specifications.
a. 25mm thick lining Sqm 55 755 41,525.00
4.2 THERMAL INSULATION OF DUCTS (Using Closed Cell Elastomeric
insulation)
Supply and Application of external thermal insulation of supply
/return air ducting using closed cell elastomeric insulation as per the
specifications and drawings.
a. 9mm thick insulation Sqm 550 985 541,750.00
b. 16mm thick insulation Sqm 90 1,615 145,350.00
4.3 CHW PIPE INSULATION
4.3.1 Using Closed Cell Elastomeric Insulation
Supply and Application of 25mm thick closed cell elastomeric insulation
in tubing form for chilled water piping as per the
specifications. Quoted price shall be inclusive of adhesive as per
specifications. Joints shall be sealed with adhesive forming proper
bonding. Quoted price shall be inclusive of necessary glass cloth and
UV protection paint to be applied over insulation.
a. 65mm dia RM -- Rate Only
b. 50mm dia RM 30 400 12,000.00
c. 40mm dia RM 85 310 26,350.00
d. 32mm dia RM 10 235 2,350.00
e. 25mm dia RM -- Rate Only
4.4 ACOUSTIC LINING OF WALLS
Supply and Application of acoustic/ thermal lining of walls of
AHU rooms using fibre glass insulation as per the specifications and
approved shop drawings.
a. 50mm thick lining Sqm -- Rate Only
b. 25mm thick lining Sqm -- Rate Only
BUTION) TOTAL
Rs.CARRIED TO SUMMARY 769,325.00
5.0 ELECTRICAL WORKS

5.1 Panels
Supply,Installation,Testing and Commissioning of the following cubical
type panels made out of 14 guage CRCA structure, base channel,
complete with, moulded case circuit breakers, meters, indicating lamps,
current transformer etc. Complete in all respects, insulated bus bars with
heat shrinkable PVC sleeve in suitable bus chambers ,
interconnection, small wiring, name plate, danger plate, earth bus etc. &
comprising of compartments with hinged door for each feeder & its
accessories, cable alley with hinged doors, bus chamber with bolted
door etc. The panel being of dust & vermin proof construction with
rubber gasket attractively powder coating etc. The panel shall be free
standing type / wall mounted type as per relavant drawing and
comprising with the following:
Notes :
1 All MCCBs shall be with operating handle.
2 CTs burden shall be 15VA & accuracy class 1.0
3 CTs shall be cast resin type .
4 All MCCBs shall be with thermal magnetic release.
5 All indication lights shall be LED type.
6 All meter shall be digital type.
7 The outgoing starter feeders for pumps,AHUS & ventilation fans
shall be provided with push buttons & indicating lamps for status
indication.
8 Proper isolation switches to be provided near air handling
units and ventilation fans in weather proof enclosure.
9 Bimetal overload relay for all the starters shall have built-in
single phasing prevention feature.
10 Electrical interlocking wiring shall be provided as per system

equirement.
11 Power cabling/wiring with necessary earthing from source to each
panel and each exhaust fan shall be provided by other agencies.
12 All HVAC equipment shall be compatible with BMS and necessary

provisions to be made in each panel.
5.1.1 AHP-Existing (Location:Fourth Floor) No 5 8,550.00 42,750.00

Dismantling and Re- Installation, Testing & Commissioning of existing
panels associated with existing ceiling ssuspended type air handling
unit of 1x6000 Cfm & 4x4000 cfm capacity installed within same
premises.
AHP-1 (Location : Near AHU) For Breakout Area - 2400 Cfm (2HP) - 1
No 1 6,175.00 6,175.00
No.
25 Amps ,TP MCB -- 1set Digital Ammeter with built in selector switch-
1sets Current Transformers -- 1set LED type ON & OFF indication lights
-- 1set START-STOP Push Buttons -- 1set 2HP DOL starter with built-in
single phasing preventor & overload relay -- 1set Auto-Manual type
selector switch to facilitate auto start of AHUs after restoration of
power -- 1set.
Control wiring and safety circuit as required with start-stop push
buttons stay put or lockable type -1set.
5.2 CABLING
5.2.1 Supply, laying, affecting connections and Testing of the
following sizes of 1.1 KV armoured PVC insulated aluminium
conductor cables. Cables shall be inclusive of all clamps, saddles,
screws, cable identification tags, cable terminal joints including
terminal lugs, insulating tapes, affecting terminal connections to
the equipment as per the specifications and as required. Quoted
price shall be inclusive of perforated duly painted 2mm thick MS trays
and 8 SWG copper earth wire for AHUs.
a 3C x 10 Sqmm cable (Copper) RM - Rate Only
b 3C x 6 Sqmm cable (Copper) RM 20 235 4,700.00
c 3C x 4 Sqmm cable (Copper) RM 50 200 10,000.00
d 3C x 2.5 Sqmm cable (Copper) RM 70 180 12,600.00
e 3C x 2.5 Sqmm cable( Copper Control cabling) RM 20 200 4,000.00
f 3C x 1.5 Sqmm cable(Copper Control cabling) RM 10 165 1,650.00
g 4C x 1.5 Sqmm cable( Copper Control cabling) RM - Rate Only
5.3 Supply, Installation & Testing of TPN isolator in weather proof
No - Rate Only
enclosure near AHU.
5.4 Supply and fixing of 1.1 KV grade rubber mat 914.4 mm wide 6mm
RM 1 2,850 2,850.00
thick to withstand 1.1 KV dielectric strength in front of each panel.
BUTION) TOTAL
Rs.CARRIED TO SUMMARY 84,725.00
BOQ FOR PLUMBING & FIRE FIGHTING WORK FOR ACE FARIDABAD
SUMMARY
1 SANITARY FIXTURES, FAUCETS & TOILET REQUISITES 500,360.00
2 SOIL, WASTE AND VENT PIPES AND FITTINGS -
3 WATER SUPPLY PIPE WORK -
4 AUTOMATIC SPRINKLER SYSTEM -
5 PORTABLE FIRE EXTINGUSHERS -
Grand Total 500,360.00
S.NO. DESCRIPTION Model no. QTY UNIT RATE AMOUNT

1.0 SANITARY FIXTURES, FAUCETS & TOILET REQUISITES
Director area toilet
1.1 Providing and fixing vitreous wall hung china water closet Hindware, Model-
(European type W.C.pan) complete with proprietry seat and Armada 92036
cover, pan connector, mounting brackets/chair including cutting
and making good the walls and floors wherever required, of the
following make and type:(or equal approved) 2 No. 27430.00 54,860.00
1.2 Providing and fixing vitreous china wash basin with special C.I Hindware, Model-
brackets, including C.P. brass waste of standard pattern, 32 mm Viva 91047
C.P brass bottle trap, complete including cutting and making
good the walls and floors, wherever required of the following
make and type: (or equal approved) 2 No. 12200.00 24,400.00
1.3 Providing and fixing vitreous wall hung china water closet Hindware, Model-
(European type W.C.pan) complete with proprietry seat and Essence 92051
cover, pan connector, mounting brackets/chair including cutting
and making good the walls and floors wherever required, of the
1.4 Providing, fixing and commissioning wall Concealed WC Hindware, Model-
Flushing Cistern with Flushing Actuator Plate ( of approved Concealo - 83mm
finish), cutting and making good the walls including making SAP Code :
connection with WC Pan, all Manufacturer`s specifications, of the 506743
1.5 Providing and fixing vitreous china wash basin with special C.I Hindware, Model-
brackets, including C.P. brass waste of standard pattern, 32 mm Monalisa 10069
C.P brass bottle trap, complete including cutting and making
good the walls and floors, wherever required of the following
make and type: (or equal approved) 3 No. 9370.00 28,110.00
1.6 Providing and fixing vitreous china flat back Urinal Basin of Hindware, Model-
size 660 mm x 345 mm x 315 mm deep, cast iron hangers for RIVA 96003
support, including cutting and making good the walls wherever

required, of the following make and type :(or equal approved) 3 No. 15580.00 46,740.00
1.7 Providing and fixing of Kitchen sink with drainboard of following Nirali
material, with R.S. or C.I. brackets painted white, C.P. brass
chain with rubber plug, 40 mm dia C.P. brass waste of standard
pattern, complete including cutting and making good the walls
wherever required, of the following make and type: (or equal
approved) 2 No. 10200.00 20,400.00
1.8 Providing, installing and commissioning INFRA-RED controlled Utec Cat No.
battery operated automatic urinal flushing system, including UT - 11B
cutting and making good the walls complete with all necessary
fittings to make it operational as required,of the following make
and type:(or equal approved) 3 No. 14000.00 42,000.00
1.9 Providing, fixing, testing and commissioning of Single lever Tall Jaquar, Model-SIG-
Boy with 140mm extension body, Fixed spout without popup 41009B,Signac
waste system with 600mm long braided hoses series, Artize 5 No. 15250.00 76,250.00
2.0 Providing and fixing of 15 mm dia. C.P. brass wall-mounted Jaquar, Model-
Kitchen sink mixer with swivel spout and wall flange of following 5167 NB
make.(or equal approved) 2 No. 4000.00 8,000.00
2.1 Providing and fixing of the 15 mm dia brass bib cock with wall Jaquar, Model-
flange of following make. (or equal approved) Continental 037 1 No. 12,050 12,050.00
2.2 Providing and fixing of 15 mm dia brass angle valve (inlet Jaquar-059
fitting ball valve type) having strainer screen complete with
wall flange of following make and model:(or equal approved) 22 No. 1085.00 23,870.00
2.3 Providing and fixing of 15 mm dia, 450 mm long flexible
connection pipe having EPDM rubber internal core and
stainless steel braided outer sheath complete with C.P brass end
nuts, of approved make. 20 No. 450.00 9,000.00
2.4 Providing, fixing and commissioning hand drier with infra red
controlled automatic on/off arrangement ( No Touch) having
following features and of approved make 4 No. 9500.00 38,000.00
2.5 Providing and fixing stainless steel finish toilet paper holder Jaquar, Model-
including cutting and making good the walls complete of ACN 1151 N
following make and type: (or equal approved) 4 No. 735.00 2,940.00
2.6 Providing and fixing wall mounted stainless steel liquid soap Jaquar, Model-
dispenser of capacity 1200 ml with stainless spout, shank, ACN
including cutting and making good the walls complete of 1137N,Metallic
following make and type: (or equal approved) bottle 4 No. 1400.00 5,600.00
2.7 Providing and fixing stainless steel coat hooks including cutting Jaquar, Model-
and making good the walls complete of following make and type: ACN 1191 ROBE
(or equal approved) HOOK 4 No. 850.00 3,400.00
2.8 Providing and fixing hand held ablution fitting (health faucet) with Jaguar-053 & 573
one metre long flexible tube and wall hook, all complete of
following make.(or equal approved) 4 No. 2050.00 8,200.00
2.9 Providing and fixing electric water storage heater (geyser) of Racold
following capacities including making inlet / outlet connections,
of approved makes.Capacity : 15 Ltrs. 3 No. 10700.00 32,100.00
TOTAL CARRIED TO SUMMARY 500,360.00
2.0 SOIL, WASTE AND VENT PIPES AND FITTINGS
2.1 Providing, jointing and fixing Centrifugally Cast (Spun) Iron,

Soil, Waste and Vent pipes of approved make conforming to
IS:3989-1970 including fittings and specials, i.e. bends, tees,
crosses, access pieces, adaptors for connections to other
materials, cleanouts, plugs, reducers, cowls, offsets, etc.in pipe
ducts , sunken floors, under slung from ceiling and jointing with
epoxy based sealant-`Dripseal`, Pipes may be laid/ fixed in pipe
ducts, sunken floors, under slung from ceiling. The pipes laid in
sunken floor shall be encased with 75 mm thick concreting all
around. Pipes fixed on MS structural supports shall be fixed with
U-clamps made from 10 mm dia MS bar complete with nuts and
washers and/or with MS holder bat clamps embeded in 1:2:4 mix
concrete block of size 10 X 10 X 10 cm. The installation shall be
complete in all respects including cutting chases / holes in walls,
slabs, including two coats enamel paint of approved quality and
shade over a coat of primer on exposed pipework, necessary
excavation, refilling and disposal of surplus earth wherever
required
and making good, etc. -
Note: Cost for MS structural work for supports shall be included
in the rates -
a) 100 mm dia 40 M -
2.2 Providing and fixing in position, the following G.I. medium class
Waste Pipes with all necessary specials complete, cutting and
chasing walls, floors, etc. and making good the same including
painting the pipes with two coats of anti-corrosive paint. -
a) 32 mm dia pipe 15 M -
b) 40 mm dia pipe 5 M -
c) 50 mm dia pipe 10 M -
2.3 Providing and fixing of floor traps formed of Cast Iron 'P' traps
complete,setting in 1:2:4 mix cement concrete block or clamping
to the wall or suspending with the ceiling including cutting and
making good the walls and floors wherever required. -
a) 100 mm inlet and 100 mm outlet 5 No. -
2.4 Providing and fixing floor trap Extension Piece made out of 100
mm dia G.I. pipe of required length with one or multiple side
inlets suitable for 32, 40 and 50 mm side connections, including
the cost of jointing with floor trap with lead caulked joint. 5 No. -
2.5 Providing and fixing floor drain points formed out of 50 mm dia
elbow with suitable extension piece, fitted with 75 mm dia nickel
bronze grating and frame, embedded in floor, all complete. 3 No. -
2.6 Providing and fixing screwed down type nickel bronze alloy
cast floor cleanout with opening arrangements for soil / waste
pipe and other necessary fittings inlcuding jointing, all complete
as per standard detail. -
a) for 100 mm dia pipe 6 No. -
2.7 Providing and fixing 110 mm dia round chrome plated bronze
grating with frame, rotate lock type embedded in floor, all
complete. 5 No. -
2.8 Making connection with existing C.I. Soil and Waste pipework.
The work includes loosening / removing the existing lead joints,
rotating the direction of the existing tees, bends etc. so as to
connect with new branch lines from the toilets, redoing the joints
with 'Dripsel', testing, commissioning all complete. Any pipe
piece, fittings etc. required to make the connection shall be
measured in Item No. 2.1 4 No. -
TOTAL CARRIED TO SUMMARY -
3.0 WATER SUPPLY PIPE WORK
3.1 Providing and fixing in position CPVC pipes conforming to IS:
15778:2007 (Grade SDR-11) with all fittings, brass threaded
adaptors and specials, solvent cement/threaded jointing,
effecting proper connections, cutting chases in walls and floors
and making good (including making connection with existing
pipework), Note: Pipe work in shafts, ceiling voids and terrace
shall be supported/ fixed on MS structural supports with U-
clamps complete with nuts and washers.Cost for MS structural
work for supports shall be included in the rates all complete.
( Pipework inside the toilets and pantry etc)
Note :
1) Solvent Cement shall be of make and grade as specified
by the manufacturer of CPVC piping system.
2) The entire CPVC piping system shall be installed, tested
and commissioned following the recommendation of the
manufacturer.
-
a) 1/2" N.D.(SDR 11 Rated ) 80 M -
b) 3/4" N.D.(SDR 11 Rated ) 45 M -
c) 1" N.D. (SDR 11 Rated ) 5 M -
3.2 Providing and fixing of nickel plated brass/ nonferrous alloy
fullyway ball valve ( minimum working pressure of 20 bar ) with
operating handle of approved make.( Note: Existing isolating
valve shall be used for making connection with new
pipework) -
a) 15 mm dia 2 No. -
b) 20 mm dia 4 No. -
c) 25 mm dia 1 No. -
d) 32 mm dia Rate
Only No.
e) 40 mm dia Rate
Only No.
3.3 Providing and fixing insulation to hot water piping with extended
synthetic rubber polymeric compound 9 mm thick preformed
pipe sleeves, using propriety adhesive and self adhesive tapes,
all as per the manufacturer's specifications.
a) 15 mm dia 10 M -
3.4 Making connection with existing water supply pipes with all
fittings, specials & clamps effecting proper connections, cutting
chases in walls and floors and making good, including painting
with two coats of anti-corrosive bitumanistic paint on buried and
concealed pipework and with two coats enamel paint of
approved quality and shade over a coat of zinc chromate primer
on exposed pipework. (Internal Work). Any pipe piece, fittings
etc. required to make the connection shall be measured in Item
No. 3.1 -
a) 15 mm dia 2 No. -
b) 20 mm dia 4 No. -
c) 25 mm dia 1 No. -
d) 32 mm dia Rate
Only No.
e) 40 mm dia Rate
Only No.
4.0 AUTOMATIC SPRINKLER SYSTEM
4.1 Providing, laying, jointing, testing and commissioning pipework
for Sprinkler System including including making connection
with existing pipework, fixing of pipework on walls, beams, slabs,
columns etc. with M. S. supports (duly painted), adjustable
hangers, complete in all respects.
Material: M.S pipe Class 'C' conforming to IS:1239 for pipes
upto 150 mm dia and IS:3589-1991 for pipes above 150 mm dia.
Fittings: M.S Forged Fittings Upto 50 mm dia pipes suitable for
threaded / weldable socketed joints ; Heavy Class MS fittings for
pipes above 50 mm dia suitable for butt welding and flanged
joints.
Painting: Pipework shall be painting with two coats of enamel
paint of fire red shade over a coat of primer.
c) 80 mm dia pipe Rate
Only M
d) 65 mm dia pipe 45 M -
e) 50 mm dia pipe 30 M -
d) 40 mm dia pipe 15 M -
e) 32 mm dia pipe 25 M -
f) 25 mm dia pipe 475 M -
4.2 Providing and fixing of brass body quartzoide bulb type
automatic sprinkler heads set to operate at specified temperature
of following types. Sprinkler heads shall be complete with
deflector.( UL Listed and FM Approved)
a) Type : Pendent type
Size : 15 mm dia
Finish: Chrome
i) Operating Temp. : 68 deg.C. 115 No. -
4.3 Providing and fixing of concealed pendent sprinkler with white
painted cover plate. Sprinkler head set to operate at specified
temperature. Sprinkler heads shall be complete with deflector.
( UL Listed and FM Approved)
a) Type : Pendent Concealed type
Size : 15 mm dia
Operating Temp. : 68 deg.C.
Operating Temp. of plate. : 57 deg.C. 5 No. -
4.4 Providing and fixing following type of surface rosette for
sprinklers, of approved make. ( UL Listed and FM Approved) -
a) Captive rosette -
i) for 15 mm dia 115 No. -
4.5 Providing and fixing 1.2 metre long corrogated stainless steel
(grade AISI 304) flexible tubing suitable for fire sprinkler
installation having 1" NPT mail thread inlet and 1/2" NPT female
thread outlet. The unit shall be complete with bracket assembly
for securly fixing on false ceiling. The product shall be UL Listed Rate
and FM Approved. Only No.
4.6 Providing and fixing Cast Iron butterfly valve as per IS: 13095
of Class PN 16, having epoxy coated disc, carbon steel shaft,
EPDM rubber body liner and of approved make. including a set
of MS flanges, required nos. of nut & bolts all complete.
a) 80 mm dia with lever Rate
Only No.
4.7 Providing and fixing of nickel plated brass/ nonferrous alloy
fullyway ball valve ( minimum working pressure of 20 bar ) with
operating handle of approved make. (Drain Valve)
a) 25 mm dia. 1 No. -
-
5.0 PORTABLE FIRE EXTINGUSHERS
5.1 Providing and fixing fully charged ABC powder type portable
fire extinguishers conforming to IS:15683, fixed to wall with
brackets complete with initial charge.
a) Capacity 2 Kg. 12 No. -
b) Capacity 6 Kg. 8 No. -
5.2 Providing and fixing fully charged ISI Marked BC powder type
portable fire extinguishers with gas cartridge all complete, fixed
to wall with brackets complete with initial charge. -
a) Capacity 9 Kg. 2 No. -
5.3 Providing and fixing HCFC blend (NAF - PIV) based like
portable fire extinguishers fixed to wall with brackets complete -
a) Capacity 5 Kg. Rate
Only No.
BOQ FOR NETWORKING SYSTEM FOR PROPOSED OFFICE BUILDING OF ACE, FARIDABAD
SUMMARY
1 SUPPLY OF MATERIAL 808,090.00
2 INSTALLATION SERVICES 597,250.00
Grand Total 1,405,340.00

Data 152
Voice 133
Total 285
S. No. Description Quantity UOM Rate Amount

1 A - Horizontal Cabling Components - Supply
Horizontal Sub System(TYCO)
1 Cat 6, UTP Cable Box ( 305 MTR)- BLUE 21 Box 9,500.00 199,500.00
2 Cat 6, UTP Cable Box(305 MTR) GREY 19 Box 9,500.00 180,500.00
Admin Sub System(TYCO)
3 24 Port-Loaded Angled Jack Panel, SL-Series, 1U For Data. 7 Nos 9,200.00 64,400.00
4 24 Port Loaded Angled Jack Panel, SL-Series, 1U For Voice Field 6 Nos 9,200.00 55,200.00
CAT 6 Slime line RJ-45 -RJ-45 UTP Patch Cord with flexible transparent Boot, Yellow
5 152 Nos
for Data ( 4 Ft.) 160.00 24,320.00
Cat 6 Slime line RJ-45 -RJ-45 UTP Patch Cord with flexible transparent Boot,Blue for
6 133 Nos
Voice (4 Ft.) 160.00 21,280.00
Voice Resource [2 Pair conenctivity]
7 24 Port Loaded Angled Jack Panel, SL-Series, 1U For Voice Field 6 Nos 9,200.00 55,200.00
8 100 Pair Multipair riser cable (Delton) 50 RM 390.00 19,500.00
9 100 Pair MDF enclosure with accessoreis (Krone) 2 Nos 5,400.00 10,800.00
Work Location Sub System (TYCO)
10 Cat 6, Rj 45 UTP jack ( Information Outlet) -Blue for Voice 152 Nos 220.00 33,440.00
11 Cat 6, Rj 45 UTP jack ( Information Outlet) - Yellow for Data 133 Nos 220.00 29,260.00
12 Duplex face plate 2.5x4 101 Nos 220.00 22,220.00
13 Quad face plate 2.5x4 25 Nos 280.00 7,000.00
CAT 6 Slime line RJ-45 -RJ-45 UTP Patch Cord with flexible transparent Boot,Yellow
14 152 Nos
for Data ( 7 Ft.) 160.00 24,320.00
15 Blank Insert 30 Nos 65.00 1,950.00
Rack-45U Open frame: (AMP)
16 45 U Open Network Rack--AL - with hardware (nut and Bolts)(AMP) 1 Nos 35,900.00 35,900.00
17 Vertical Cable Manager 4 Nos 1,900.00 7,600.00
18 Horzontal Cable manager 10 Nos 890.00 8,900.00
19 Mounting Hardware (pack of 10) 5 Nos 540.00 2,700.00
20 Horizontal power distribution unit 6 sockets 5/15 Amp--Universal 1 Nos 2,200.00 2,200.00
21 Ladder tray for open Rack with L-Type Breakets. 1 Nos 1,900.00 1,900.00
TOTAL 808,090.00
2 Installation service
Shielded Components
1 Laying of Cat 6 UTP cable in conduit/channel/raceway as provided 12200 RM 15.00 183,000.00
2 Termination of Shielded Ios - Both Ends (Field Side + Rack Side) 285 Each 550.00 156,750.00
3 Installation of Face Plate 126 Each 100.00 12,600.00
5 Testing of Data Nodes & Voice Points 285 Each 550.00 156,750.00
6 Documentation - Per Point 285 Each 190.00 54,150.00
7 Numbering & Labelling 285 Each 100.00 28,500.00
Rack Components
8 Installation of 42 U Network Rack with all Accessories 1 Each 5,500.00 5,500.00
Total 597,250.00
EXCLUSION ITEMS
S. No. DESCRIPTION
1 No artifacts and Art works

2 External area civil and interior work
3 Popup box
4 No DG Set Back Up
5 No HT/LT Panel/ Servo-stabliser
6 External Lighting
Office Equipments and all active componets like - Computers, EPBAX, Telephones,Copier/Printer, Photocopier, Popup box,
7 IP Lines etc.
8 Pantry and Toilet Equipments like - Dishwasher, R/O System, Tea/Coffee Vending Machine & Shoe Shiner
9 UPS and invertors
10 Audio Visual, Plasma, LCD, VC equipment and Projector
11 Additional Accessories - Planters with plants etc.
12 Precision AC not incluided
13 Gas Suppression(FM 200) not included
14 Bain marie
15 Supply of Leutron panel for dimming.

Boq Ace

Uploaded by

Copyright:

Available Formats

Boq Ace

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Boq Ace

Uploaded by

Copyright:

Available Formats

GRAND SUMMARY

A Annexure - A (Civil & Interior) Rs. 14,652,804.00

B Annexure - B (Modular & Chairs) Rs. 2,017,480.00

C Annexure - C (Carpet flooring ) Rs. 650,250.00

D Annexure - D ( Soft sitting ) Rs. 701,600.00

E Annexure - E (Electrical work) Rs. 5,174,790.00

F Annexure - F (HVAC work) Rs. 3,257,777.50

G Annexure - G (Plumbing & Fire fighting work) Rs. 500,360.00

H Annexure - H (Networking) Rs. 1,405,340.00

Total Rs. 28,360,402.00

Less Discount Supervisory/staff expesess atsite Rs. 500,000.00

a Total After Discount Rs. 27,860,402.00

Less Work Already done:

Total Before Taxes & Duties (a-b) Rs. 24,503,599.00

Add: VAT @ 12.5% Rs. 2,450,360.00

Grand Total After Taxes & Duties Rs. 27,640,059.00

Terms: (All work would be started at the same time)

ALL DISPUTES SUBJECTS TO NEW DELHI JURISDINCTION

For, Forma Design Studio for…………………………………..

A-2 MASONARY & PLASTER Rs. 1,099,050.00

A-3 FLOORING AND WALL CLADDING Rs. 2,282,827.50

B-2 CEILING Rs. 1,162,775.00

B-3 DOORS Rs. 970,020.00

C LOOSE FURNITURE:- Rs. 2,378,361.50

D FEATURE WALLS:- Rs. 781,355.00

E FINISHES:- Rs. 477,075.00

F SIGNAGES:- Rs. 478,020.00

G MISCELLANEOUS Rs. 322,525.00

H TOILET WORKS Rs. 819,780.00

GRAND TOTAL Rs. 14,652,804.00

2 DISMANTLING OF RAISED FLOOR :- Dismantling 300mm high of

3 DISMANTLING OF BRICK WORK :- Dismantling of brick wall of all

Sub Total of Civil & Wet Works 51,170.00 -

A-2 MASONARY AND PLASTER

2 CEMENT PLASTER :- Providing and laying 12 to 15mm thick cement

4 CEMENT CONCRETE SCREEDING :- Providing and laying 100mm thick

Sub Total of MASONARY AND PLASTER 1,099,050.00 -

A-3 FLOORING AND WALL CLADDING

2 ITALIAN STONE FLOORING :-Providing and laying Italian Stone Flooring

a Type - 1 ( Fiorito Bottochino ) SQM 192 6,840.00 1,313,280.00

5 ANTISTATIC RAISED FLOOR - Uniflor ® USF 800 Access Floor panel of

6 WOODEN RAISED FLOOR : 100mm high wooden raised floor with

7 TRANSITION PROFILE:- P/F transition profile of SS T-section 6mm thk

8 ITALIAN MARBLE SKIRTING :- Providing and fixing 75mm high Italian

INTACT CRYSTAL (Single Glass) PARTITIONS: Providing 38 x 38mm size

3 WOODEN PARTITION : Providng and fixing 100mm thick wooden

8 VENEER PANELLING-Providing and panelling of Veneer with 12mm Sonear /

11 WAVE BOARD PANELLING :- P/F extra 12mm thick wave board

12 WALL PAPER:-Providing and fixing wall paper on POP/ Gypboard

13 FABRIC / PINUP PANELLING-P&F soft board paneling over adequate Response /

5 WOODEN RAFTER CEILING : Providing and fixing 40 x 100mm thk. Veneer :

Sub Total of DOORS 970,020.00

side with adjustable laminated shelves complete as /design

1 No. 1 90,250.00 90,250.00

Feature wall in Director entrance area with veneer panelling, Italain

a Veneer panelling Sqm 10 4,600.00 46,000.00 4,850.00

3 No. 1 142,500.00 142,500.00

a Wooden framing Sqm 10 4,275.00 42,750.00