0818 Pressure Sensors DB GB Internet

GRUNDFOS DATA BOOKLET
Pressure sensors
Grundfos Direct Sensors™
Pressure sensors
1. Product overview 4
Table of contents
2. Product introduction 5
3. Relative Pressure transmitters, Industry (RPI and RPI+T) 6

General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
RPI and RPI+T, 0 - 0.6 bar (0 - 8.7 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
RPI and RPI+T, 0 - 1.0 bar (0 - 14.5 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RPI and RPI+T, 0 - 1.6 bar (0 - 23.2 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RPI and RPI+T, 0 - 10.0 bar (0 - 145.0 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RPI+T2, 0 - 16.0 bar (0 - 232.1 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Differential Pressure transmitter, Industry (DPI I) 18

General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DPI, 0 - 0.6 bar (0 - 8.7 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DPI, 0 - 1.0 bar (0 - 14.5 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DPI, 0 - 1.2 bar (0 - 17.4 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DPI, 0 - 1.6 bar (0 - 23.2 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DPI, 0 - 2.5 bar (0 - 36.3 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DPI, 0 - 4.0 bar (0 - 58.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DPI, 0 - 6.0 bar (0 - 87.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DPI, 0 - 10.0 bar (0 - 145.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5. Differential Pressure transmitter, Industry (DPI II and DPI II+T) 27

General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DPI II and DPI II+T, 0 - 0.6 bar (0 - 8.7 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DPI II and DPI II+T, 0 - 1.0 bar (0 - 14.5 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
DPI II and DPI II+T, 0 - 10.0 bar (0 - 145.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
DPI II and DPI II+T, 0 - 16.0 bar (0 - 232.1 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. Relative Pressure sensor Standard, RPS 37

General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RPS, 0 - 0.6 bar (0 - 8.7 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
RPS, 0 - 1.0 bar (0 - 14.5 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
RPS, 0 - 1.6 bar (0 - 23.2 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
RPS, 0 - 2.5 bar (0 - 36.3 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
RPS, 0 - 4.0 bar (0 - 58.0 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
RPS, 0 - 6.0 bar (0 - 87.0 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
RPS, 0 - 10.0 bar (0 - 145.0 psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
RPS, 0 - 16.0 bar (0 - 232.1 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7. Differential Pressure sensor Standard, DPS 47

General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DPS, 0 - 0.6 bar (0 - 8.7 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
DPS, 0 - 1.0 bar (0 - 14.5 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
DPS, 0 - 1.6 bar (0 - 23.2 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
DPS, 0 - 2.5 bar (0 - 36.3 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
DPS, 0 - 4.0 bar (0 - 58.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
DPS, 0 - 6.0 bar (0 - 87.0 psid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
8. Product range 55
RPI transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
DPI II and DPI II+T transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
DPI I transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
RPS and DPS sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2
Pressure sensors
9. Accessories 58
Table of contents
SI power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
M12 cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Capillary tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adapter for Grundfos CR pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Snap-on cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
SI converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
10. Appendix 60
Installation of RPI and DPI II transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
11. Grundfos Product Center 61
3
Pressure sensors
1
1. Product overview
Product overview
This data booklet is for the latest version of Grundfos Direct Sensors™. Customers already buying Grundfos Direct
Sensors™ might be buying a sensor with another specification
Variant Description Technical data
RPI
Pressure range: 0 - 0.6 to 25 bar (0 - 8.7 to 363 psig)
System pressure range: Maximum 30 bar (453 psig)
Relative Pressure transmitter, Industry System temperature: -30 to +120 °C (-22 to +248 °F)
• stainless-steel housing. Signal: 4-20 mA (2-wire)
Power supply: 12.5 - 30 VDC
Enclosure class: IP67
RPI+T Pressure range: 0 - 0.6 to 25 bar (0 - 8.7 to 363 psig)

Temperature range: 0-120 °C (32-248 °F)
Relative Pressure transmitter, Industry System pressure: Maximum 30 bar (453 psig)
• combined pressure and temperature measurement System temperature: -30 to +120 °C (-22 to +248 °F)
• stainless-steel housing. Signal: 2 x 0-10 VDC (4-wire)
DPI
Differential pressure range: 0 - 0.6 to 10 bar (0 - 8.7 to 145 psid)
System pressure: Maximum 30 bar (453 psig)
Differential Pressure transmitter, Industry
System temperature: -10 to +70 °C (14 to 158 °F)
• conventional sensor with two capillaries
Signal: 4-20 mA (3-wire)
• stainless-steel and composite housing.
Power supply: 12-30 VDC
DPI II
Differential pressure range: 0 - 0.6 to 16 bar (0 - 8.7 to 232 psid)
System temperature: -30 to +120 °C (-22 to +248 °F)
• G 1/2 connection and one capillary
Signal: 4-20 mA (2-wire)
• stainless-steel housing.
DPI II+T Differential pressure range: 0 - 0.6 to 16 bar (0 - 8.7 to 232 psid)
• G 1/2 connection and one capillary
System temperature: -30 to +120 °C (-22 to +248 °F)
• combined pressure and temperature measurement
Signal: 2 x 0-10 VDC (4-wire)
• stainless-steel housing.
RPS Pressure range: 0 - 0.6 to 16 bar (0 - 8.7 to 232 psig)

Relative Pressure sensor, Standard System pressure: Maximum 24 bar (348 psig)
• combined pressure and temperature measurement System temperature: 0-120 °C (32-248 °F)
• composite transmitter. Signal: 2 x 0.5 - 3.5 VDC (4-wire)
Power supply: 5 VDC (PELV)
Enclosure class: IP44 (with connected cable)
DPS Pressure range: 0 - 0.6 to 6 bar (0 - 8.7 to 87 psid)

Differential Pressure sensor, Standard System pressure: Maximum 24 bar (348 psig)
• combined pressure and temperature measurement System temperature: 0-120 °C (32-248 °F)
• composite transmitter. Signal: 2 x 0.5 - 4.5 VDC (4-wire)
Power supply: 5 VDC (PELV)
Enclosure class: IP44 (with connected cable)
4
Pressure sensors
2
2. Product introduction
Product introduction
This data booklet describes these Grundfos products: Differential-pressure sensor
• industrial relative- and differential-pressure sensors The central part of a differential-pressure sensor is a
• standard relative- and differential-pressure sensors. chip which transforms the differential pressure into
electrical signals. The difference between the two
system pressures on either side of the chip, called the
differential pressure, causes the chip to warp. This is
registered as a change of resistance in the strain
gauges of a Wheatstone bridge. The change in
TM04 5034 2409 - TM04 7865 2410

TM04 7866 2410 - TM05 4752 2512
resistance is converted into an analog output signal.
The sensors incorporating temperature measurement
also transform the temperature of the liquid into
electrical signals.
Fig. 1 Grundfos pressure sensors
Three different types of pressure are used in pressure

measurement:
• Absolute pressure: the measured value is zero-
referenced against vacuum.
TM03 4055 1406

• Relative pressure: the measured value is zero-
referenced against the ambient pressure.
• Differential pressure: the measured value is the
difference between two pressures.
The Grundfos pressure sensor ranges contain relative- Fig. 2 Schematic view of how the chip is affected by
and differential-pressure sensors as well as relative- pressure on both sides
and differential-pressure sensors combined with
temperature measurement capable of measuring Sensor chip
temperatures from 0 to 100 °C (32 to 212 °F). This The steady-state properties of silicon protect the chip
makes Grundfos sensorsTM suitable for a wide range against wear and tear. Lifelong nano-coating
of applications. protection enables direct measurement (wet-wet) in a
cost-effective packaging for aqueous media. The
Relative-pressure sensor secret is a metal-glass alloy coating, Silicoat ®, which is
The central part of a relative-pressure sensor is a chip extremely resistant to corrosion. Compared to
which transforms the pressure into electrical signals. conventional sensor technologies, which encapsulate
The difference between the ambient air pressure and the unprotected measuring cell to protect it from the
the system pressure causes the chip to warp which is liquid, Silicoat® ensures protection of the chip from
registered as a change of resistance in the strain aqueous media (pH2 - pH11) at temperatures up to
gauges of a Wheatstone bridge. The change in 120 °C (248 °F) through the entire life of the product.
resistance is converted into an analog output signal.
The sensors incorporating temperature measurement Definitions
also transform the temperature of the liquid into
Burst Pressure
electrical signals.
The signals are linearised and compensated for the The maximum allowable pressure (relative to ambient)
influence of temperature variations. in a system, which will not destroy the sensor or
transmitter. Measured in [bar].
Maximum System Pressure
Maximum allowable static pressure (relative to ambient
pressure) in a system, where the flow is zero.
5
Pressure sensors
3
3. Relative Pressure transmitters, Industry (RPI and RPI+T)

Relative Pressure transmitters, Industry (RPI and RPI+T)
General data Pressure range

Pressure range
[bar] [psig]
0 - 0.6 0 - 8.7
0 - 1.0 0 - 14.5
0 - 1.6 0 - 23.2
TM04 7865 2510

0 - 2.5 0 - 36.3
0 - 4.0 0 - 58.0
0 - 6.0 0 - 87.0
0 - 10.0 0 - 145.0
0 - 16.0* 0 - 232.1
Fig. 3 RPI, RPI+T transmitter 0 - 25.0 0 - 362.6
* RPI+T2 is a special 0-16.0 bar Relative Pressure Transmitter,

Technical overview Industry measuring up to 120 C at 10 V intended for Magna3 and
TPE3.
The RPI relative-pressure transmitter from Grundfos
Direct Sensors™ is designed for industrial Approvals (w/EPDM O-rings)
applications. The transmitter is designed to be
• WRAS
mounted direct on a unit, for example a pump.
• KTW
The RPI transmitter is fully compatible with aqueous
media. The transmitter is based on MEMS sensing • A4020
technology in combination with the corrosion-resistant • ACS.
Silicoat® coating technology on the transmitter chip.
This makes the RPI transmitter very robust and ideal Certificates
for pump integration and monitoring in harsh
environments.The RPI+T transmitter offers a two-in-
one solution with combined pressure and temperature
measurement. + 75
CE C, CSA, US EAC
Applications
• Pump control
• HVAC systems
• temperature control and chiller systems
• renewable energies such as heat pumps, solar
thermals, fresh water and micro-CHP systems
• monitoring and control systems
• water treatment plants
• water utility and distribution systems
• HPC and IT cooling systems.
Features and benefits

• Pressure and temperature measurement in one
transmitter (two-in-one solution) for easy and cost-
efficient installation (RPI+T)
• MEMS technology
• direct contact with the aqueous media resulting in a
fast response time
• plug and play for quick setup
• smart system solution with Grundfos pump controls
• compact and robust design
• compatible with aggressive aqueous medias
• suitable for a wide temperature range.
• suitable for a wide range of applications.
6
Pressure sensors
3
Electrical connections

2 1
3 4
TM06 1070 1514

Fig. 4 Electrical connections
RPI
Signal condition: 2-wire (loop-powered)
Pin 1 2 3 4
Wire colour Brown White Blue Black

Power Not Pressure signal
I/O Not used
supply used 4-20 mA
RPI+T
Signal condition: 4-wire
Pin 1 2 3 4

Power Pressure signal Temperature
I/O GND*
supply 0-10 V signal 0-10 V
* Common ground for pressure and temperature signals.

Power supply, screened cable: SELV or PELV.
Directives
The Grundfos Direct Sensors™ are in conformity
with these council directives on the approximation of
the laws of the EC member states:
• • Low Voltage Directive (2014/35/EU)
– Standards used: EN 61010-1:2010
• EMC Directive (2014/30/EU).
– Standards used: EN 61326-1:2013 and EN
61326-2-3:2013
The GRUNDFOS Direct Sensors™ are exempted from
the Pressure Equipment Directive (PED) according to
Article 4, paragraph 3 in the PED 2014/68/EU.
7
Pressure sensors
3
RPI and RPI+T, 0 - 0.6 bar (0 - 8.7 Specifications
psig) Pressure
Measuring range 0 - 0.6 bar (0 - 8.7 psig)
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Resolution 1/1000 FS
Temperature, RPI+T with temperature output
Measuring range 0-100 °C (32-212 °F)
Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
Fig. 5 RPI and RPI+T transmitter Accuracy (± 1 σ),
±2K
0-100 °C (32-212 °F)
Dimensions Response time for sensor Less than 100 ms
electronics (typically 50 ms)
Resolution 0.1 K
System conditions and environment
Aqueous media compatible with
Liquid types
wetted materials
Liquid temperature, operation,
-30 to +120 °C (-22 to +248 °F)
not freezing
B
Ambient temperature, operation -25 to +60 °C (-13 to +140 °F)

Storage temperature -55 to +70 °C (-67 to +158 °F)
Humidity 0-95 % RH, non-condensing
TM04 9237 3510
C Maximum system pressure 30 bar (435 psig)

Burst pressure 40 bar (580 psig)
Electrical data, RPI without temperature output
A
Power supply, RPI 12.5 - 30 VDC
Fig. 6 Dimensions, RPI and RPI+T Output signals 4-20 mA
– Signal cut off 21 mA
Maximum power consumption 660 mW
A B C 60 Ω at 12.5 VDC
mm 36.95 110 100 Ω at 13.3 VDC
ISO 228/1 - G 1/2 Maximum load impedance
600 Ω at 24 VDC
in 1.45 4.33
900 Ω at 30 VDC
Output signals Maximum cable length 30 m (98 ft)
Electrical data, RPI+T with temperature output
Power supply, RPI+T 16.6 - 30 VDC
Output signals 0-10 VDC
(0 V at 0 °C, 10 V at 100 °C)
– Signal cut off 11 VDC
Minimum load impedance 10 kΩ
TM06 3358 1716
Maximum cable length 30 m (98 ft)

Materials
Sensing element Silicon-based MEMS
P max Sealing EPDM or FKM
Fig. 7 Pressure response, RPI Housing Stainless steel 1.4404 (AISI 316 L)
Corrosion-resistant coating
Wetted materials EPDM or FKM
Stainless steel 1.4404 (AISI 316 L)
10V
Environmental standards
Enclosure class IP67, cable-connected
Temperature cycling IEC 68-2-14
Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
Electromagnetic compatibility EN 61326-1
TM06 3359 1716
0
0 P max
T max
Fig. 8 Pressure and temperature response, RPI+T
8
Pressure sensors
3

psig) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Temperature, RPI with temperature output
Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
Liquid temperature, operation -30 to +120 °C (-22 to +248 °F)
B
Ambient temperature,
-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510

C
Maximum system pressure 30 bar (435 psig)
A Electrical data, RPI without temperature output

A B C Maximum power consumption 660 mW
60 Ω at 12.5 VDC
mm 36.95 110
ISO 228/1 - G 1/2 100 Ω at 13.3 VDC
in 1.45 4.33 Maximum load impedance
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716
Materials
Sealing EPDM or FKM
Housing Stainless steel 1.4404 (AISI 316 L)
P max
Fig. 11 Pressure response, RPI Wetted materials EPDM or FKM
Enclosure class IP67, cable connected
10V Temperature cycling IEC 68-2-14
TM06 3359 1716
0
0 P max
T max
9
Pressure sensors
3
psig) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B
-25 to +60 °C (-13 to +140 °F)
operation
Storage temperature -55 to +70 °C (-67 -to +158 °F)
TM04 9237 3510


Fig. 14 Dimensions, RPI and RPI+T Output signals 0-10 VDC
(0 V at 0 °C, 10 V at 100 °C)
A B C
mm 36.95 110 60 Ω at 12.5 VDC
ISO 228/1 - G 1/2
in 1.45 4.33 100 Ω at 13.3 VDC
Maximum load impedance
600 Ω at 24 VDC
Output signals 900 Ω at 30 VDC
Power consumption Maximum 270 mW
Load impedance Minimum 10 kΩ
TM06 3358 1716
Materials
Sealing EPDM or FKM
P max
TM06 3359 1716
0
0 P max
T max
10
Pressure sensors
3

psig) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B

TM04 9237 3510

C
A Power supply, RPI 12.5 - 30 VDC
Output signals 4-20 mA
Fig. 18 Dimensions, RPI and RPI+T – Signal cut off 21 mA
100 Ω at 13.3 VDC
mm 36.95 110 Maximum load impedance
ISO 228/1 - G 1/2 600 Ω at 24 VDC
in 1.45 4.33 900 Ω at 30 VDC
Output signals
(0 V at 0 °C, 10 V at 100 °C)
Materials
TM06 3358 1716

Sealing EPDM or FKM
P max Corrosion-resistant coating
Fig. 19 Pressure response, RPI Stainless steel 1.4404 (AISI 316 L)
10V Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
TM06 3359 1716
0
0 P max
T max
11
Pressure sensors
3
psig) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B

TM04 9237 3510

C
A Power supply, RPI 12.5 - 30 VDC
Fig. 22 Dimensions, RPI and RPI+T – Signal cut off 21 mA
100 Ω at 13.3 VDC
mm 36.95 110 Maximum load impedance
ISO 228/1 - G 1/2 600 Ω at 24 VDC
in 1.45 4.33 900 Ω at 30 VDC
Output signals
(0 V at 0 °C, 10 V at 100 °C)
Materials
TM06 3358 1716

Sealing EPDM or FKM
P max
Fig. 23 Pressure response, RPI Stainless steel 1.4404 (AISI 316 L)
10V Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
TM06 3359 1716
0
0 P max
T max
12
Pressure sensors
3

psig) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B
-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510

A
(0 V at 0 °C, 10 V at 100 °C)
A B C
mm 36.95 110 660 Ω at 12.5 VDC
ISO 228/1 - G 1/2
in 1.45 4.33 100 Ω at 13.3 VDC
600 Ω at 24 VDC
TM06 3358 1716
Materials
Sealing EPDM or FKM
10V
TM06 3359 1716
0
0 P max
T max
13
Pressure sensors
3
RPI and RPI+T, 0 - 10.0 bar (0 - Specifications
145.0 psig) Pressure

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B
-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510

A
(0 V at 0 °C, 10 V at 100 °C)
A B C
mm 36.95 110 660 Ω at 12.5 VDC
ISO 228/1 - G 1/2
in 1.45 4.33 100 Ω at 13.3 VDC
600 Ω at 24 VDC
TM06 3358 1716
Materials
Sealing EPDM or FKM
10V
TM06 3359 1716
0
0 P max
T max
14
Pressure sensors
3

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B
-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510

A
A B C
660 Ω at 12.5 VDC
mm 36.95 110 100 Ω at 13.3 VDC
in 1.45 4.33 600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716
Materials
Sealing EPDM or FKM
P max
TM06 3359 1716
0
0 P max
T max
15
Pressure sensors
3
RPI+T2, 0 - 16.0 bar (0 - 232.1 psig) Specifications
Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +120 °C (-22 to +248 °F)
Less than 100 ms
TM04 9240 3510

Response time
(typically 50 ms)
Measuring range -10 to +120 °C (14 to +248 °F)
Fig. 37 RPI+T transmitter Accuracy (± 1 σ),
±1K
-10 - 15 and 90-120 °C
Dimensions Accuracy (± 1 σ),
± 0.5 K
15-90 °C
Response time for sensor Less than 100 ms
Resolution 0.1 K
Liquid types
wetted materials
B

-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510
C Storage temperature -55 to +70 °C (-67 to +158 °F)

A Burst pressure 40 bar (580 psig)
Fig. 38 Dimensions, RPI+T transmitter
A B C (0 V at -10 °C, 10 V at 120 °C)
mm 36.95 110 – Signal cut off 11 VDC
ISO 228/1 - G 1/2
in 1.45 4.33 Maximum power consumption 270 mW
Materials
10V Sealing EPDM
Wetted materials EPDM
TM07 2422 3518

0
P min P max
T min T max

TM07 2415 3518
Fig. 40 MAGNA3 and TPE3 with RPI+T2 transmitter
16
Pressure sensors
3

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Less than 100 ms
Response time
(typically 50 ms)
TM04 9240 3510

Accuracy (± 1 σ),
±1K
0-80 °C (32-176 °F)
±2K
0-100 °C (32-212 °F)
Resolution 0.1 K
Liquid types
wetted materials
B
-25 to +60 °C (-13 to +140 °F)
operation
TM04 9237 3510


A B C Maximum power consumption 660 mW
60 Ω at 12.5 VDC
mm 36.95 110 100 Ω at 13.3 VDC
in 1.45 4.33 600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716
Materials
Sealing EPDM or FKM
P max
TM06 3359 1716
0
0 P max
T max
17
Pressure sensors
4
4. Differential Pressure transmitter, Industry (DPI I)

Differential Pressure transmitter, Industry (DPI I)
General data Certificates
+ 75
CE C, CSA, US EAC
TM04 4738 0509

Fig. 45 DPI sensor
Technical overview
The DPI differential-pressure transmitter from
Grundfos Direct Sensors™ is designed for industrial
purposes.
The DPI transmitter is fully compatible with aqueous
media. The sensor is based on MEMS sensing
technology in combination with the corrosion-resistant
Silicoat® coating technology on the sensor chip.
This makes the DPI transmitter very robust and ideal
for pump integration and monitoring in harsh
environments.
Applications
• Pump control
• HVAC systems
TM03 2225 3905

• water treatment plants Fig. 46 Electrical connections
• HPC and IT cooling systems. Pin Description Colour
1 12-30 V supply voltage Brown
Features and benefits 2 GND (earth conductor) Yellow
3 Signal conductor Green
• MEMS technology
Test conductor
• No wear and tear The conductor can be cut off during mounting.
4 White
• plug and play for quick setup The conductor must not be connected to the
power supply.
• compact and robust design Directives
• compatible with aqueous media The Grundfos Direct Sensors™ are in conformity with
• suitable for a wide range of applications. these council directives on the approximation of the
laws of the EC member states:
Pressure range • Low Voltage Directive (2014/35/EU)
Pressure range
[bar] [psid]
0 - 0.6 0 - 8.7
0 - 1.0 0 - 14.5 61326-2-3:2013
0 - 1.2 0 - 17.4 The GRUNDFOS Direct Sensors™ are exempted from
0 - 1.6 0 - 23.2 the Pressure Equipment Directive (PED) according to
0 - 2.5 0 - 36.3 Article 4, paragraph 3 in the PED 2014/68/EU.
0 - 4.0 0 - 58.0
For outside usage, the DPI I is IP55, and may only be
0 - 6.0 0 - 87.0
0 - 10.0 0 - 145.0
used outside in it's 0.9 m. variants powered by a
Grundfos pump or the SI power supply (See
Accessories on page 58).
18
Pressure sensors
4
DPI, 0 - 0.6 bar (0 - 8.7 psid) Specifications

Pressure
Measuring range 0 - 0.6 bar (0 - 8.7 psid)
Accuracy (IEC 61298-2) 3.5 % FS
Response time Less than 0.5 s
System pressure deviation 6 mbar/bar (0.09 psid/psig)
TM04 5034 2409

Liquid types
wetted materials
Liquid temperature, operation -10 to +70 °C (14 to 158 °F)
Liquid temperature, peak Up to 80 °C (176 °F)
Ambient temperature -40 to +70 °C (-40 to +158 °F)
Fig. 47 DPI transmitter Ambient temperature, peak -55 to +90 °C (-67 to +194 °F)
Humidity, relative 0-95 %, non-condensing
Dimensions
Maximum p1-p2 pressure 16 bar (232 psid)
Electrical data
Power supply, 12-30 VDC
F 500 kΩ at 24 V
Maximum load impedance 200 kΩ at 16 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
O-ring FKM
C
Housing Stainless steel 1.4305 (AISI 303)
A B Wetted materials FKM, PPS and 1.4305
Fig. 48 Dimensions, DPI Environmental standards
Enclosure class IP55
A B C D E F Temperature cycling IEC 68-2-14
7/16 - 20 Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
mm 14 6 ∅45 77 Immunity EN 61000-6-2
UNF
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
flare Weight 550 g (1.21 lbs)
Output signals
TM06 3358 1716
P max
Fig. 49 Differential-pressure response, DPI
19
Pressure sensors
4
Pressure
Accuracy (IEC 61298-2) 2 % FS
TM04 5034 2409

Liquid types
wetted materials
Fig. 50 DPI transmitter
Ambient temperature, peak -55 to +90 °C (-67 to +194 °F)
Dimensions
Electrical data
Power supply 12-30 VDC
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C
O-ring FKM
A B
Wetted materials FKM, PPS and 1.4305
mm 14 6 ∅45 77
UNF Immunity EN 61000-6-2
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
20
Pressure sensors
4

Pressure
TM04 5034 2409

Liquid types
wetted materials
Humidity, relative 0-95 % non-condensing
Dimensions
Electrical data
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C O-ring FKM
A B
mm 14 6 ∅45 77
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
21
Pressure sensors
4
Pressure
TM04 5034 2409

Liquid types
wetted materials
Dimensions
Electrical data
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C
O-ring FKM
A B
mm 14 6 ∅45 77
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
22
Pressure sensors
4

Pressure
TM04 5034 2409

Liquid types
wetted materials
Dimensions
Electrical data
F 500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
O-ring FKM
C
A B Wetted materials FKM, PPS and 1.4305
mm 14 6 ∅45 77
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
23
Pressure sensors
4
Pressure
TM04 5034 2409

Liquid types
wetted materials
Humidity 0-95 %, non-condensing
Dimensions
Electrical data
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C
O-ring FKM
A B
mm 14 6 ∅45 77 Immunity EN 61000-6-2
UNF
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
24
Pressure sensors
4

Pressure
TM04 5034 2409

Liquid types
wetted materials
Ambient temperature, peak -55 to- +90 °C (-67 to +194 °F)
Dimensions
Electrical data
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C
O-ring FKM
A B
mm 14 6 ∅45 77
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
25
Pressure sensors
4
Pressure
TM04 5034 2409

Liquid types
wetted materials
Dimensions Humidity, relative 0-95 %, non-condensing
Electrical data
F
500 kΩ at 24 V
100 kΩ at 12 V
D
P2
E

TM03 2059 3505
Materials
P1
C O-ring FKM
A B
mm 14 6 ∅45 77
SW 14
0.25" Emission EN 61000-6-3
in 0.55 0.24 ∅1.77 3.03
Output signals
TM06 3358 1716
P max
26
Pressure sensors
5
5. Differential Pressure transmitter, Industry

(DPI II and DPI II+T)
Pressure range
[bar] [psid]
0 - 0.6 0 - 8.7
0 - 1.0 0 - 14.5
0 - 1.6 0 - 23.2
0 - 2.5 0 - 36.3
0 - 4.0 0 - 58.0
TM04 7866 2510

0 - 6.0 0 - 87.0
0 - 10.0 0 - 145.0
0 - 16.0 0 - 232.1
Approvals (w/EPDM O-rings)

Fig. 71 DPI II transmitter
• WRAS
Technical overview • KTW
The DPI II+T combined differential-pressure and • AS 4020
temperature transmitter (two-in-one) from Grundfos • ACS.
Direct Sensors™ is designed for industrial
applications. Certificates
The capillary tube makes it possible to measure the
differential pressure.
The DPI II+T transmitter is fully compatible with
aqueous media. The transmitter is based on MEMS + 75
CE C, CSA, US EAC
sensing technology in combination with the corrosion-
resistant Silicoat® coating technology on the
transmitter chip.
This makes the DPI I+T transmitter very robust and
ideal for pump integration and monitoring in harsh
environments.
Applications
• Pump control
• HVAC systems

• Differential pressure and temperature measurement
in one transmitter (two-in-one solution) for easy and
cost-efficient installation (DPI II+T)
• MEMS technology.
fast response time
• compatible with aqueous media
• suitable for a wide temperature range
27
Pressure sensors
5
2 1
3 4
TM06 1070 1514

DPI II
Signal condition: 2-wire (loop-powered)
Pin 1 2 3 4

Pressure
Power
I/O Not used signal Not used
supply
4-20 mA
DPI II+T
Signal condition: 4-wire
Pin 1 2 3 4

Pressure Temperature
Power
I/O signal GND* signal
supply
0-10 V 0-10 V
* Common ground for pressure and temperature signals. Power

supply, screened cable: SELV or PELV.
Directives
• Low Voltage Directive (2014/35/EU)
61326-2-3:2013
28
Pressure sensors
5
DPI II and DPI II+T, 0 - 0.6 bar (0 - Specifications

8.7 psid) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
Response time Less than 100 ms (typically 50 ms)
TM04 9239 3510

Temperature, DPI II+T with temperature output
Accuracy (± 1 σ),
±1K
Fig. 73 DPI II and DPI II+T transmitter 0-80 °C (32-176 °F)
Accuracy (± 1 σ),
±2K
0-100 °C (32-212 °F)
Dimensions
Response time for sensor
Less than 100 ms (typically 50 ms)
electronics
Resolution 0.1 K
Liquid types
wetted materials
B

D Ambient temperature, operation -25 to +60 °C (-13 to +140 °F)
Humidity, relative 0-95 % RH, non-condensing
TM04 9238 0415

C
A Maximum p2-p1 pressure 10 bar (145 psid)
Electrical data, DPI II without temperature output
Fig. 74 Dimensions, DPI II and DPI II+T
Power supply, DPI II 12.5 - 30 VDC
A B C D – Signal cut off 21 mA
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF Maximum power consumption 660 mW
in 1.45 4.33 G 1/2 0.25" flare 60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
900 Ω at 30 VDC
Electrical data, DPI II+T with temperature output
Power supply, DPI II+T 16.6 - 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
P max O-ring EPDM or FKM
Fig. 75 Pressure response, DPI II Corrosion-resistant coating
10V Enclosure class IP67, cable connected
TM06 3359 1716
0
0 P max
T max
Fig. 76 Pressure and temperature response, DPI II+T
29
Pressure sensors
5
14.5 psid) Pressure

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
Dimensions 0-120 °C (32-248 °F)
Resolution 0.1 K
Liquid types
wetted materials
B

D
TM04 9238 0415

A
Fig. 78 Dimensions, DPI II and DPI II+T Electrical data, DPI II without temperature output
A B C D Output signals 4-20 mA
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF
in 1.45 4.33 G 1/2 0.25" flare
60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
Output signals Maximum load impedance
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
P max
O-ring EPDM or FKM
Fig. 79 Pressure response, DPI II Housing Stainless steel 1.4404 (AISI 316 L)
10V
TM06 3359 1716
0
0 P max
T max
30
Pressure sensors
5

23.2 psid) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
0-120 °C (32-248 °F)
Dimensions
Resolution 0.1 K
Liquid types
wetted materials
B

TM04 9238 0415

C
in 1.45 4.33 G 1/2 0.25" flare 60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
10V
TM06 3359 1716
0
0 P max
T max
31
Pressure sensors
5
36.3 psid) Pressure

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
Dimensions 0-120 °C (32-248 °F)
Resolution 0.1 K
Liquid types
wetted materials
B

D
TM04 9238 0415

A
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF
in 1.45 4.33 G 1/2 0.25" flare
60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
P max
O-ring EPDM or FKM
10V
TM06 3359 1716
0
0 P max
T max
32
Pressure sensors
5

58.0 psid) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
0-120 °C (32-248 °F)
Dimensions
Resolution 0.1 K
Liquid types
wetted materials
B

D
TM04 9238 0415

C
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF
in 1.45 4.33 G 1/2 0.25" flare
60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
10V
TM06 3359 1716
0
0 P max
T max
33
Pressure sensors
5
87.0 psid) Pressure

Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
0-120 °C (32-248 °F)
Dimensions
Resolution 0.1 K
Liquid types
wetted materials
B

D
TM04 9238 0415

C
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF
in 1.45 4.33 G 1/2 0.25" flare
60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
10V
TM06 3359 1716
0
0 P max
T max
34
Pressure sensors
5

145.0 psid) Pressure
Accuracy (± 1 σ),
± 2 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 2.5 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
Dimensions 0-120 °C (32-248 °F)
Resolution 0.1 K
Liquid types
wetted materials
B

D
TM04 9238 0415

A
mm 36.95 110 ISO 228/1 - 7/16 - 20 UNF
in 1.45 4.33 G 1/2 0.25" flare
60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
P max
O-ring EPDM or FKM
10V
TM06 3359 1716
0
0 P max
T max
35
Pressure sensors
5
232.1 psid) Pressure

Accuracy (± 1 σ),
± 2.5 % FS
0-80 °C (32-176 °F)
Accuracy (± 1 σ),
± 3 % FS
-30 to +100 °C (-22 to +212 °F)
TM04 9239 3510

Accuracy (± 1 σ),
±1K
Accuracy (± 1 σ),
±2K
0-120 °C (32-248 °F)
Dimensions
Resolution 0.1 K
Liquid types
wetted materials
B

TM04 9238 0415

C
in 1.45 4.33 G 1/2 0.25" flare 60 Ω at 12.5 VDC
100 Ω at 13.3 VDC
600 Ω at 24 VDC
900 Ω at 30 VDC
(0 V at 0 °C, 10 V at 100 °C)
TM06 3358 1716

Materials
10V
TM06 3359 1716
0
0 P max
T max
36
Pressure sensors
6
6. Relative Pressure sensor Standard, RPS
Relative Pressure sensor Standard, RPS

Pressure range
[bar] [psig]
0 - 0.6 0 - 8.7
0 - 1.0 0 - 14.5
0 - 1.6 0 - 23.2
TM06 1286 2214

TM06 1287 2214
0 - 2.5 0 - 36.3
0 - 4.0 0 - 58.0
0 - 6.0 0 - 87.0
0 - 10.0 0 - 145.0
0 - 16.0 0 - 232.0
Fig. 105 RPS sensor
Approvals (w/EPDM O-rings)
Technical overview
• WRAS
The RPS is a combined pressure and temperature
• KTW
sensor (two-in-one) from Grundfos Direct Sensors™.
• AS 4020
The RPS sensor is fully compatible with wet, aqueous
media. The sensor is based on MEMS sensing • ACS.
technology in combination with the corrosion-resistant
Silicoat® coating technology on the sensor chip. Certificates
Applications
• Pump control + 75
• HVAC systems CE C, CSA, US EAC

• Pressure and temperature measurement in one
sensor (two-in-one solution) for easy and cost-
efficient installation
• MEMS technology.
fast response time
37
Pressure sensors
6
Analogue signal Digital signal
Electrical
connector
1 2 3 4 Pin No 1 2 3 4
Temperature signal
V Pressure signal 3Y
V 5Y
TM04 7156 1610

Pipe system
PE PE
Description Description
Pin Colour
Analogue signal Digital signal
1 Temperature signal Rx Yellow
2 Pressure signal Tx White
3 GND, 0 V PELV GND, 0 V PELV Green
4 Voltage supply, +5 VDC Power supply, +5 VDC Brown
Power supply requirements

• VDC +/- 5 % PELV (Ratiometric)
• The sensor must be separated from hazardous live
circuitry by double or reinforced insulation
• Max 10 mV ripple, 50 Hz
• Min output current 25 mA
• Grounding of sensor supply is required
Options
TM06 6670 2016
TM06 6671 2016
Fig. 107 Sensor options
Description
1/2'' nipple, stainless steel (316L)
Differential Temperature
The differential temperature is between two standard
Direct SensorsTM from GRUNDFOS.
Directives
61326-2-3:2013
38
Pressure sensors
6
RPS, 0 - 0.6 bar (0 - 8.7 psig) Specifications

Pressure
Accuracy (± 1 σ), in water,
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Response time (63.2 %) Less than 1 s
Resolution 0.6 mbar (0.009 psig)
Temperature
TM06 1287 2214

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Fig. 108 RPS sensor Resolution 0.008 K
Dimensions Differential Temperature

Accuracy 15-90 °C (59-194 °F) 0.3 K
D E Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
wetted materials
C
Liquid temperature, operation 0-120 °C (32-248 °F)

-25 to +120 °C (-13 to +248 °F),
B
Liquid temperature, peak

non-freezing
TM05 4669 2512

A F Maximum system pressure 24 bar (348 psig)
Burst Pressure 30 bar (435 psig)
G
Electrical data
Fig. 109 Dimensions, RPS
5 VDC (± 5 %), PELV
Power supply Grounding of sensor supply
A B C D E F G required.
Output signals Ratiometric
mm 4.5 53.7 27 20 39.9 10.2 14.8
Digital output signals Grundfos open data protocol
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58
0.5-3.5 V for pressure
(zero at 0.5 V)
Analog output signals
Output signals 0.5-4.1 V for temperature
(zero at 0.5 V and 100 °C at 3.5 V)
[V] Power consumption Appr. 75 mW
Load impedance > 47 kΩ
Pressure output signal
Maximum cable length 3 m (9.10 ft)

Materials
Sensor Silicon-based MEMS
TM06 3360 5214
EPDM O-rings, FKM O-rings or

Sealing EPDM sealing cap with FKM O-
rings
Housing Composite, PPS
Corrosion-resistant coating, PPS,
P max
EPDM or FKM
Wetted materials
Fig. 110 Pressure response in Analogue mode Adapter ISO 7/1 - R1/2" and NPT 1/
2", EN 1.4408 (AISI 316)
[V]
Temperature output signal
4.5 Enclosure class IP44

4.0 Temperature cycling IEC 68-2-14
3.5 Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
Fig. 111 Temperature response in Analogue mode
39
Pressure sensors
6
Pressure
Accuracy (± 1 σ),
± 1.5 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 2 % FS
0-120 °C (32-248 °F)
Response time Less than 1 s
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
TM06 1287 2214

250 ms
electronics
Resolution 0.008 K
Accuracy 15-90 °C (59-194 °F) 0.3 K
Fig. 112 RPS sensor Accuracy 0-120 °C (32-248 °F) 0.5 K
Dimensions Aqueous media compatible with
Liquid types
wetted materials
D E Liquid temperature, operation 0-120 °C (32-248 °F)
-25 to +120 °C (-13 to +248 °F),
non-freezing
C

B

TM05 4669 2512
Electrical data
5 VDC (± 5 %), PELV
A F Power supply Grounding of sensor supply
required.
G
Fig. 113 Dimensions, RPS Digital output signals Grundfos open data protocol
(zero at 0.5 V)
A B C D E F G Analog output signals
0.5-4.1 V for temperature
mm 4.5 53.7 27 20 39.9 10.2 14.8 (zero at 0.5 V and 100 °C at 3.5 V)
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 Power consumption Appr. 75 mW
Output signals Maximum cable length 3 m (9.10 ft)
Materials
[V] Sensor Silicon-based MEMS

rings
Housing Composite (PPS)
TM06 3360 5214
EPDM or FKM
Wetted materials
Adapter ISO 7/1 - R1/2" and NPT 1/
2" EN 1.4408 (AISI 316)
P max
Fig. 114 Pressure response in Analogue mode Temperature cycling IEC 68-2-14
[V] Electromagnetic compatibility EN 61326-1
4.5
4.0
3.5
3.0
2.5
2.0
1.5
TM06 3354 5214
1.0
0.5
0.0
0 120
T max =
peak temperature
40
Pressure sensors
6

Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K
Fig. 116 RPS sensor Differential Temperature
Accuracy 15-90 °C (59-194 °F) 0.3 K
Dimensions Accuracy 0-120 °C (32-248 °F) 0.5 K
D E
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F),
C

non-freezing
B

TM05 4669 2512

A F Electrical data
G 5 VDC (± 5 %), PELV
Fig. 117 Dimensions, RPS required.
A B C D E F G Digital output signals Grundfos open data protocol
mm 4.5 53.7 27 20 39.9 10.2 14.8 0.5-3.5 V for pressure
(zero at 0.5 V)
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 Analog output signals
Output signals Power consumption Appr. 75 mW
[V] Maximum cable length 3 m (9.10 ft)
Materials

rings
TM06 3360 5214

EPDM or FKM
Wetted materials
Adapter ISO 7/1 - R1/2" and NPT
P max 1/2", EN 1.4408 (AISI 316)
Fig. 118 Pressure response in Analogue mode Environmental standards
[V] Temperature cycling IEC 68-2-14

4.0 Electromagnetic compatibility EN 61326-1
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
41
Pressure sensors
6
Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K

Accuracy 15-90 °C (59-194 °F) 0.3 K
D E Aqueous media compatible with
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
C

B

TM05 4669 2512
A Electrical data
F
5 VDC (± 5 %), PELV
G Power supply Grounding of sensor supply
required.
Fig. 121 Dimensions, RPS Output signals Ratiometric
A B C D E F G
(zero at 0.5 V)
mm 4.5 53.7 27 20 39.9 10.2 14.8 0.5-4.1 V for temperature
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 (zero at 0.5 V and 100 °C at 3.5 V)
Power consumption Appr. 75 mW
Output signals Load impedance > 47 kΩ
[V] Materials

rings
TM06 3360 5214

EPDM or FKM
Wetted materials
2", EN 1.4408 (AISI 316)
P max Environmental standards
Fig. 122 Pressure response in Analogue mode Enclosure class IP44, cable connected
[V]

4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
42
Pressure sensors
6

Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K

Accuracy 15-90 °C (59-194 °F) 0.3 K
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
C

B

TM05 4669 2512

Electrical data
A F
5 VDC (± 5 %), PELV
required.
A B C D E F G (zero at 0.5 V)
mm 4.5 53.7 27 20 39.9 10.2 14.8 0.5-4.1 V for temperature
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 (zero at 0.5 V and 100 °C at 3.5 V)
Output signals Load impedance > 47 kΩ
[V] Materials

rings
TM06 3360 5214

EPDM or FKM
Wetted materials
2" EN 1.4408 (AISI 316)
P max Environmental standards
Fig. 126 Pressure response in Analogue mode Enclosure class IP44, cable connected
[V]
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
43
Pressure sensors
6
Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K

Accuracy 15-90 °C (59-194 °F) 0.3 K
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F), non-
freezing
C

B

TM05 4669 2512
A Electrical data
F
5 VDC (± 5 %), PELV
required.
0.5-3.5 V for pressure (zero at 0.5 V)
A B C D E F G
Analog output signals 0.5-4.1 V for temperature
mm 4.5 53.7 27 20 39.9 10.2 14.8 (zero at 0.5 V and 100 °C at 3.5 V)
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 Power consumption Appr. 75 mW
Materials
[V]
Sealing
EPDM sealing cap with FKM O-rings

EPDM or FKM
TM06 3360 5214
Wetted materials
2" EN 1.4408 (AISI 316)
P max
Fig. 130 Pressure response in Analogue mode Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
[V]
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
44
Pressure sensors
6

Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K

Accuracy 15-90 °C (59-194 °F) 0.3 K
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
C

B

TM05 4669 2512
A Electrical data
F
5 VDC (± 5 %), PELV
G Power supply
Grounding of sensor supply required.
Fig. 133 Dimensions, RPS Digital output signals Grundfos open data protocol
0.5-3.5 V for pressure (zero at 0.5 V)
A B C D E F G
mm 4.5 53.7 27 20 39.9 10.2 14.8 Power consumption Appr. 75 mW
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58 Load impedance > 47 kΩ
Output signals
Materials
[V] Sensor Silicon-based MEMS
Sealing

EPDM or FKM
Wetted materials
TM06 3360 5214

2" EN 1.4408 (AISI 316)
P max
Fig. 134 Pressure response in Analogue mode Vibration, non-destructive 20-2000 Hz, 10 G, 4 h
[V]
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
45
Pressure sensors
6
RPS, 0 - 16.0 bar (0 - 232.1 psid) Specifications
Pressure
Accuracy (± 1 σ),
± 1 % FS
15-90°C (59-194°F)
Accuracy (± 1 σ),
± 1.5 % FS
0-120 °C (32-248 °F)
Temperature
Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
TM06 1287 2214

Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
Resolution 0.008 K
Accuracy 15-90 °C (59-194 °F) 0.3 K
D E
Liquid types
wetted materials
-25 to +120 °C (-13 to +248 °F),
C

non-freezing
B

TM05 4669 2512

A F
Electrical data
G 5 VDC (± 5 %), PELV
Power supply
Grounding of sensor supply required.
A B C D E F G 0.5-3.5 V for pressure (zero at 0.5 V)
mm 4.5 53.7 27 20 39.9 10.2 14.8
in 0.18 2.11 1.06 0.79 1.57 0.40 0.58
Materials
[V]
Sealing
TM06 3360 5214
EPDM or FKM
Wetted materials
2" EN 1.4408 (AISI 316)
P max Enclosure class IP44, cable connected
Fig. 138 Pressure response in Analogue mode Temperature cycling IEC 68-2-14
[V]
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
46
Pressure sensors
7
7. Differential Pressure sensor Standard, DPS
Differential Pressure sensor Standard, DPS

General data Approvals (w/EPDM O-rings)
• WRAS
• KTW
• ACS.
Certificates
TM06 1682 2614

+ 75
Fig. 140 DPS sensor CE C, CSA, US EAC
Technical overview Electrical connections

The DPS is a combined differential-pressure and Analogue signal Digital signal
temperature sensor (two-in-one) from Grundfos Direct
Electrical
Sensors™. connector
The DPS sensor is fully compatible with aqueous
1 2 3 4 1 2 3 4
media. The sensor is based on MEMS sensing Pin No
technology in combination with the corrosion-resistant Temperature signal
Silicoat® coating technology on the sensor chip.
V Pressure signal 3Y
Applications V 5Y
TM04 7156 1610

Pipe system
• Pump control
• HVAC systems
• temperature control and chiller systems PE PE
• renewable energies such as heat pumps, solar Fig. 141 Electrical connections
• monitoring and control systems Description Description
Pin Colour
• water treatment plants Analogue signal Digital signal
• water utility and distribution systems 1 Temperature signal Rx Yellow

2 Pressure signal Tx White
3 GND, 0 V PELV GND, 0 V PELV Green
4 Voltage supply, +5 VDC Power supply, +5 VDC Brown
• Differential pressure and temperature measurement Power supply requirements
in one sensor (two-in-one solution) for easy and • VDC +/- 5 % PELV (Ratiometric)
cost-efficient installation • The sensor must be separated from hazardous live
• MEMS technology circuitry by double or reinforced insulation
• direct contact with the aqueous media resulting in a • Max 10 mV ripple, 50 Hz
fast response time • Min output current 25 mA
• plug and play for quick setup • Grounding of sensor supply is required
Pressure range
Pressure range
[bar] [psid]
0 - 0.6 0 - 8.7
0 - 1.0 0 - 14.5
0 - 1.6 0 - 23.2
0 - 2.5 0 - 36.3
0 - 4.0 0 - 58.0
0 - 6.0 0 - 87.0
47
Pressure sensors
7
Options
Part
Stainless steel adapter
Fitting, 6 mm (0.23")
Tube fitting
Fitting, 8 mm (0.31")
1.4408
(AISI 316)
Fitting, 6 mm (0.23") Compression
Fitting, 8 mm (0.31") fitting
Wall bracket for DPS

with stainless steel
adapter
The differential temperature is between two standard
Direct SensorsTM from Grundfos.
Directives
– Standards used: EN 61326-1:2013 and
EN 61326-2-3:2013
48
Pressure sensors
7
DPS, 0 - 0.6 bar (0 - 8.7 psid) Specifications

Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
TM06 1682 2614

Resolution 1.2 mbar (0.02 psid)
Temperature
Accuracy (± 1 σ),
± 0.5 K
Fig. 142 DPS sensor 15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
Dimensions
250 ms
electronics
A D
Resolution 0.008 K
Accuracy 15-90 °C (59-194 °F) 0.3 K
B
Accuracy 0-120 °C (32-248 °F) 0.5 K

2xH Aqueous media compatible with
G
Liquid types
wetted materials
TM06 3455 0115
-25 to +120 °C (-13 to +248 °F),

non-freezing
C F
E
Fig. 143 Dimensions, DPS 24 bar (348 psig)
Maximum system pressure 16 bar (232 psig) at 70 °C (158 °F)
12 bar (145 psig) at 100 °C (212 °F)
A B C D E F G H Burst Pressure 30 bar (435 psig)
mm 20 29.9 40 39.9 35 32.9 57.9 1/8 - 27 Maximum p1-p2 pressure 16 bar (232 psid)
in 0.79 1.18 1.57 1.57 1.38 1.30 2.28 NPT Maximum p2-p1 pressure 10 bar (145 psid)
Electrical data
Output signals 5 VDC (± 5 %), PELV.
[V] required.

(zero at 0.5 V)
TM06 3360 5214

Load impedance > 47 kΩ
P max Materials
Fig. 144 Pressure response in Analogue mode Sensing element Silicon-based MEMS
Sealing cap EPDM
[V] Housing Composite (PPS)
4.5 Corrosion-resistant coating, PPS,

Wetted materials
4.0 EPDM or FKM,
3.5 Environmental standards
3.0
2.5 Enclosure class IP44, cable connected
2.0 Temperature cycling IEC 68-2-14
1.0
TM06 3354 5214

0.0
0 120
T max =
peak temperature
49
Pressure sensors
7
Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Temperature
TM06 1682 2614

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
Fig. 146 DPS sensor Response time for sensor
250 ms
electronics
Dimensions Resolution 0.008 K
A D Accuracy 15-90 °C (59-194 °F) 0.3 K
Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
B
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
2xH
G

24 bar (348 psig)
TM06 3455 0115

12 bar (145 psig) at 100 °C (212 °F)
C F Burst Pressure 30 bar (435 psig)
E Maximum p1-p2 pressure 16 bar (232 psid)
Fig. 147 Dimensions, DPS
Electrical data
5 VDC (± 5 %), PELV.
A B C D E F G H Power supply Grounding of sensor supply
mm 20 29.9 40 39.9 35 32.9 57.9 required.
1/8 - 27
in 0.79 1.18 1.57 1.57 1.38 1.30 2.28 NPT Output signals Ratiometric
Output signals (zero at 0.5 V)
[V] (zero at 0.5 V and 100 °C at 3.5 V)

Materials
TM06 3360 5214

Sealing cap EPDM
Wetted materials
P max EPDM or FKM,
[V]

3.5
3.0
2.5
2.0
1.5
TM06 3354 5214
1.0
0.5
0.0
0 120
T max =
peak temperature
50
Pressure sensors
7

Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Temperature
TM06 1682 2614

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
A D Accuracy 15-90 °C (59-194 °F) 0.3 K
Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
B
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
2xH
G

TM06 3455 0115
24 bar (348 psig)

12 bar (145 psig) at 100 °C (212 °F)
Electrical data
5 VDC (± 5 %), PELV.
mm 20 29.9 40 39.9 35 32.9 57.9 required.
1/8 - 27
Output signals 0.5-3.5 V for pressure
(zero at 0.5 V)

Materials
TM06 3360 5214

Sealing cap EPDM
P max
Wetted materials
EPDM or FKM,
[V] Temperature cycling IEC 68-2-14

3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
51
Pressure sensors
7
Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Temperature
TM06 1682 2614

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
A D Accuracy 15-90 °C (59-194 °F) 0.3 K
Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
B
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
2xH
G

24 bar (348 psig)
TM06 3455 0115

12 bar (145 psig) at 100 °C (212 °F)
Fig. 155 Dimensions, DPS Electrical data
5 VDC (± 5 %), PELV.
required.
mm 20 29.9 40 39.9 35 32.9 57.9 1/8 - 27
NPT Output signals Ratiometric
in 0.79 1.18 1.57 1.57 1.38 1.30 2.28

Materials
TM06 3360 5214

Sealing cap EPDM
Wetted materials
P max EPDM or FKM,

[V]

4.5
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
52
Pressure sensors
7

Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Temperature
TM06 1682 2614

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
A D Accuracy 15-90 °C (59-194 °F) 0.3 K
Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
wetted materials
B

-25 to +120 °C (-13 to +248 °F),
non-freezing
2xH
G

24 bar (348 psig)
TM06 3455 0115

12 bar (145 psig) at 100 °C (212 °F)
E
Fig. 159 Dimensions, DPS Electrical data
5 VDC (± 5 %), PELV.
required.
mm 20 29.9 40 39.9 35 32.9 57.9 1/8 - 27
in 0.79 1.18 1.57 1.57 1.38 1.30 2.28 NPT

Materials
TM06 3360 5214

Sealing cap EPDM
Wetted materials
P max EPDM or FKM,

[V]
4.5
3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
53
Pressure sensors
7
Pressure
± 1.5 % FS
15-90 °C (59-194 °F)
± 2 % FS
0-120 °C (32-248 °F)
Temperature
TM06 1682 2614

Accuracy (± 1 σ),
± 0.5 K
15-90 °C (59-194 °F)
Accuracy (± 1 σ),
±1K
0-120 °C (32-248 °F)
250 ms
electronics
A D Accuracy 15-90 °C (59-194 °F) 0.3 K
Accuracy 0-120 °C (32-248 °F) 0.5 K
Liquid types
B
wetted materials
-25 to +120 °C (-13 to +248 °F),
non-freezing
2xH
G

24 bar (348 psig)
TM06 3455 0115

12 bar (145 psig) at 100 °C (212 °F)
Electrical data
5 VDC (± 5 %), PELV.
mm 20 29.9 40 39.9 35 32.9 57.9 required.
1/8 - 27

Materials
TM06 3360 5214

Sealing cap EPDM
Wetted materials
P max EPDM or FKM,
[V]

3.5
3.0
2.5
2.0
1.5
1.0
TM06 3354 5214
0.5
0.0
0 120
T max =
peak temperature
54
Pressure sensors
8
8. Product range
Product range
RPI transmitter
Scope of delivery:
• RPI transmitter
• 2 m (6.5 ft) cable
• quick guide.
Temperature O-ring
Complete product range Pressure range Thread Outside usage
measurement EPDM FKM
RPI/--0-0.6b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
RPI/--0-0.6b/1/C/M2.00-X/VG6/--/03P/SD-1 0 - 0.6 bar ● ●
G 1/2
RPI/--0-0.6b/1/F/M2.00-X/EG6/--/03P/SD-1 (0 - 8.7 psig) ● ● ●
RPI/--0-0.6b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/--0-1.0b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/--0-1.0b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/--0-1.6b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/--0-1.6b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/--0-2.5b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/--0-2.5b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/--0-4.0b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/--0-4.0b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/--0-6.0b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/--0-6.0b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/---0-10b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
RPI/---0-10b/1/C/M2.00-X/VG6/--/03P/SD-1 0 - 10.0 bar ● ●
G 1/2
RPI/---0-10b/1/F/M2.00-X/EG6/--/03P/SD-1 (0 - 145.0 psig) ● ● ●
RPI/---0-10b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/---0-16b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/---0-16b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
RPI/---0-25b/1/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
RPI/---0-25b/1/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
55
Pressure sensors
8
DPI II and DPI II+T transmitter
Product range
Scope of delivery:
• DPI II and DPI II+T transmitter
• 2 m (6.5 ft) cable
• capillary tube with fitting
• quick guide.
Temperature O-ring
Complete product range Pressure range Thread Outside usage
measurement EPDM FKM
DPI/--0-0.6b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
DPI/--0-0.6b/2/C/M2.00-X/VG6/--/03P/SD-1 0 - 0.6 bar ● ●
G 1/2
DPI/--0-0.6b/2/F/M2.00-X/EG6/--/03P/SD-1 (0 - 8.7 psid) ● ● ●
DPI/--0-0.6b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/--0-1.0b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
DPI/--0-1.0b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/--0-1.6b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
DPI/--0-1.6b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/--0-2.5b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
DPI/--0-2.5b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/--0-4.0b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
DPI/--0-4.0b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/--0-6.0b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
G 1/2
DPI/--0-6.0b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/---0-10b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
DPI/---0-10b/2/C/M2.00-X/VG6/--/03P/SD-1 0 - 10.0 bar ● ●
G 1/2
DPI/---0-10b/2/F/M2.00-X/EG6/--/03P/SD-1 (0 - 145.0 psid) ● ● ●
DPI/---0-10b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
DPI/---0-16b/2/C/M2.00-X/EG6/--/03P/SD-1 ● ●
DPI/---0-16b/2/C/M2.00-X/VG6/--/03P/SD-1 0 - 16.0 bar ● ●
G 1/2
DPI/---0-16b/2/F/M2.00-X/EG6/--/03P/SD-1 (0 - 232.1 psid) ● ● ●
DPI/---0-16b/2/F/M2.00-X/VG6/--/03P/SD-1 ● ● ●
56
Pressure sensors
8
DPI I transmitter
Product range
The DPI I transmitter is available as an individual packaged transmitter as well as in sets with capillary tubes.
As standard, the scope of delivery includes: (for outside usage only powered by Grundfos pump or the SI power
supply. See accessory section for more information.)
• DPI I transmitter
• cable with bracket
• installation and operating instructions.
See table below for sets with special parts.
Reducing
Pressure Cable Wall Motor Capillary piece Service Outside
Product description
range length bracket bracket tube 7/16-20 UNF instructions usage
- R 1/4
0 - 0.6 bar 0.9 m
DPI/--0-0.6b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 8.7 psid) (2.9 ft)
0 - 1.0 bar 0.9 m
DPI/--0-1.0b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 14.5 psid) (2.9 ft)
0 - 1.6 bar 0.9 m
DPI/--0-1.6b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 23.2 psid) (2.9 ft)
0 - 2.5 bar 0.9 m
DPI/--0-2.5b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 36.3 psid) (2.9 ft)
0 - 4.0 bar 0.9 m
DPI/--0-4.0b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 58.0 psid) (2.9 ft)
0 - 6.0 bar 0.9 m
DPI/--0-6.0b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 87.0 psid) (2.9 ft)
0 - 10.0 bar 0.9 m
DPI/---0-10b/1/G/D.900-B/V-5/--/---/VC-1 ● ●
(0 - 145.0 psid) (2.9 ft)
0 - 0.6 bar 0.9 m
DPI/--0-0.6b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 8.7 psid) (2.9 ft)
0 - 1.0 bar 0.9 m
DPI/--0-1.0b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 14.5 psid) (2.9 ft)
0 - 1.6 bar 0.9 m
DPI/--0-1.6b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 23.2 psid) (2.9 ft)
0 - 2.5 bar 0.9 m
DPI/--0-2.5b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 36.3 psid) (2.9 ft)
0 - 4.0 bar 0.9 m
DPI/--0-4.0b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 58.0 psid) (2.9 ft)
0 - 6.0 bar 0.9 m
DPI/--0-6.0b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 87.0 psid) (2.9 ft)
0 - 10.0 bar 0.9 m
DPI/---0-10b/1/G/D.900-B/V-5/-B/02B/SD-1 ● ● ● ● ● ●
(0 - 145.0 psid) (2.9 ft)
0 - 1.2 bar 5m
DPI/--0-1.2b/1/G/D5.00-B/V-5/-B/02B/TD-1 ● ● ●
(0 - 17.4 psid) (16.4 ft)
0 - 2.5 bar 5m
DPI/--0-2.5b/1/G/D5.00-B/V-5/-B/02B/TD-1 ● ● ●
(0 - 36.3 psid) (16.4 ft)
0 - 4.0 bar 5m
DPI/--0-4.0b/1/G/D5.00-B/V-5/-B/02B/TD-1 ● ● ●
(0 - 58.0 psid) (16.4 ft)
0 - 6.0 bar 5m
DPI/--0-6.0b/1/G/D5.00-B/V-5/-B/02B/TD-1 ● ● ●
(0 - 87.0 psid) (16.4 ft)
0 - 10.0 bar 5m
DPI/---0-10b/1/G/D5.00-B/V-5/-B/02B/TD-1 ● ● ●
(0 - 145.0 psid) (16.4 ft)
RPS and DPS sensors

Grundfos offers a wide range of custom-built RPS and DPS sensors.
The RPS and DPS sensors can be customised depending on the application.
Therefore, contact Grundfos Direct Sensors™ when proceeding to selection.
57
Pressure sensors
9
9. Accessories
Accessories
SI power supply Adapter

The SI power supply from Grundfos Direct Sensors™ Use the adapter together with the capillary tube. The
is an external power supply for the DPI I transmitter. adapter enables the connection of the tube to the
Use the external power supply where the distance system.
between the sensor and the controller is longer than
Description
30 m (98 ft).
Fitting, G 1/4 - 7/16, 20 UNF
TM04 4194 0809

Adapter for Grundfos CR pumps
This adapter is required when fitting the RPI, RPI+T or
DPI II, DPI II+T on Grundfos CR pumps.
Fig. 166 SI power supply Grundfos CR pump size

Pump type
1 3 5 10 15 20 32 45 64 90 120 150
Specifications:
CR, CRE - - - - ❍ ❍ ❍ ● ● ● ● ●
• Voltage range: 110-400 VAC.
• Frequency: 50-60 Hz. CRI, CRIE - - - - ❍ ❍ ● ● ● ● ● ●
• Ambient temperature: -20 to +50 °C (-4 to +122 °F). CRN, CRNE - - - - ❍ ❍ ❍ ● ● ● ● ●

• Enclosure class: IP54.
- An adapter is not required.
Part ❍ An adapter is required if the sensor and coupling guard are in
direct contact. This will create unnecessary acoustic noise.
SI power supply ● An adapter is always required.
Description
M12 cable
4-wire screened cable with M12 connector in the
sensor end and open end in the equipment end. Use Adapter for RPI, RPI+T and DPI II and DPI II+T
the cable for the industrial sensor series such as RPI,
DPI II and VFI.
Description Length
Snap-on cable
Cable, industry, M2.000X 2 m (6.6 ft) Cable with snap-on connection in the sensor end and
different variants in the equipment end, such as open
end, ferrules and various types of connectors.
Cable, industry, M5.000X 5 m (16.4 ft)
Use the cable for the standard sensor series such as
VFS, RPS and DPS.
The cable is available in various lengths, mainly 1.2 m
Capillary tube and 2.9 m.
Use the capillary tube together with the DPI I, DPI II
and DPI II+T to connect the transmitter to the low- Description Length [mm]
pressure side of the equipment. Ferrules, 1.2 m 1.200
The capillaries are available in copper and stainless
steel as well as in various lengths. Ferrules, 2.9 m 2.900
Description
Capillary tube, 7/16 - 20 UNF
58
Pressure sensors
9
SI converter
Accessories
The SI converter from Grundfos Direct Sensors™ is an
external power supply, signal amplifier and signal
converter for Grundfos standard sensors: RPS, VFS
and DPS.
The SI converter has built-in precision resistors
enabling the sensor to transmit 4-20 mA, 1-5 V and
2-10 V output signals.
Use the SI converter in applications incorporating
sensors from the standard product range. The sensor
interface delivers a 4-20 mA input signal to external
controllers.
TM04 4882 2209
Fig. 167 SI converter
Specifications:
• Voltage range: 115-230 VAC ± 10 % or 24 VDC.
• Frequency: 50-60 Hz.
• Power consumption: Maximum 2.5 W.
• Ambient temperature: -20 to +50 °C (-4 to +122 °F).
• Enclosure class: IP20.
Part
SI converter, IP20
59
Pressure sensors
10
10. Appendix
Appendix
Installation of RPI and DPI II transmitters
TM07 2421 3518
60
Pressure sensors
11
11. Grundfos Product Center
Grundfos Product Center

Online search and sizing tool to help you
make the right choice.
http://product-selection.grundfos.com
SIZING enables you to REPLACEMENT enables you to find a

size a pump based on replacement product.
entered data and Search results will include information on
selection choices.
• the lowest purchase price
• the lowest energy consumption
• the lowest total life cycle cost.
CATALOGUE gives you LIQUIDS enables you to find pumps

access to the Grundfos and sensors designed for aqueous
product catalogue. media or other special liquids.
All the information you need in one place Downloads

Performance curves, technical specifications, pictures, dimensional drawings, motor On the product pages, you can download
curves, wiring diagrams, spare parts, service kits, 3D drawings, documents, system parts. installation and operating instructions, data
The Product Center displays any recent and saved items - including complete projects - booklets, service instructions, etc. in PDF format.
right on the main page.
61
ECM: XX
97790251 0818
GRUNDFOS A/S
www.grundfos.com
Telephone: +45 87 50 14 00
DK-8850 Bjerringbro . Denmark
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. © Copyright Grundfos Holding A/S

0818 Pressure Sensors DB GB Internet

Uploaded by

Copyright:

Available Formats

0818 Pressure Sensors DB GB Internet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

0818 Pressure Sensors DB GB Internet

Uploaded by

Copyright:

Available Formats

GRUNDFOS DATA BOOKLET

3. Relative Pressure transmitters, Industry (RPI and RPI+T) 6

4. Differential Pressure transmitter, Industry (DPI I) 18

5. Differential Pressure transmitter, Industry (DPI II and DPI II+T) 27

6. Relative Pressure sensor Standard, RPS 37

7. Differential Pressure sensor Standard, DPS 47

11. Grundfos Product Center 61

Variant Description Technical data

RPI+T Pressure range: 0 - 0.6 to 25 bar (0 - 8.7 to 363 psig)

RPS Pressure range: 0 - 0.6 to 16 bar (0 - 8.7 to 232 psig)

DPS Pressure range: 0 - 0.6 to 6 bar (0 - 8.7 to 87 psid)

TM04 5034 2409 - TM04 7865 2410

Fig. 1 Grundfos pressure sensors

Three different types of pressure are used in pressure

TM03 4055 1406

3. Relative Pressure transmitters, Industry (RPI and RPI+T)

General data Pressure range

TM04 7865 2510

* RPI+T2 is a special 0-16.0 bar Relative Pressure Transmitter,

Features and benefits

Relative Pressure transmitters, Industry (RPI and RPI+T)

TM06 1070 1514

Wire colour Brown White Blue Black

Wire colour Brown White Blue Black

* Common ground for pressure and temperature signals.

TM04 9240 3510

Ambient temperature, operation -25 to +60 °C (-13 to +140 °F)

C Maximum system pressure 30 bar (435 psig)

Maximum cable length 30 m (98 ft)

Fig. 8 Pressure and temperature response, RPI+T

Relative Pressure transmitters, Industry (RPI and RPI+T)

TM04 9240 3510

Humidity 0-95 % RH, non-condensing

A Electrical data, RPI without temperature output

Fig. 12 Pressure and temperature response, RPI+T

TM04 9240 3510

Humidity 0-95 % RH, non-condensing

A Electrical data, RPI without temperature output

Fig. 16 Pressure and temperature response, RPI+T

Relative Pressure transmitters, Industry (RPI and RPI+T)

TM04 9240 3510

Ambient temperature, operation -25 to +60 °C (-13 to +140 °F)

Maximum system pressure 30 bar (435 psig)

Sensing element Silicon-based MEMS

Fig. 20 Pressure and temperature response, RPI+T

TM04 9240 3510

Ambient temperature, operation -25 to +60 °C (-13 to +140 °F)

Maximum system pressure 30 bar (435 psig)

Sensing element Silicon-based MEMS

Fig. 24 Pressure and temperature response, RPI+T

Relative Pressure transmitters, Industry (RPI and RPI+T)

TM04 9240 3510

Humidity 0-95 % RH, non-condensing

Fig. 28 Pressure and temperature response, RPI+T

145.0 psig) Pressure

TM04 9240 3510

Humidity 0-95 % RH, non-condensing

Fig. 32 Pressure and temperature response, RPI+T

Relative Pressure transmitters, Industry (RPI and RPI+T)