Ador
Ador
DATA BOOK
PERSONAL INFORMATION
NAME ____________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
NAME ____________________________________________________________
___________________________________________________________________
___________________________________________________________________
PERSONAL
PRODUCT SPECTRUM - 06
LH-ALLOY TECHNOLOGY - 12
NEW PRODUCTS - 14
ZIPARC - 218
Aviation &
Steel & other
Industrial Gas
metallurgical complexes
Turbines
Fertilizer &
Power Plants chemical plants
04
ADFL STRENGTHS
• World class agencies and technologies.
• Complete product range for reclamation and surfacing solutions.
• Application Engineering Specialists at almost all important
industrial locations all over India.
• Product management support and vital end-user coverage by
entral Product Group Executives.
• Dedicated sales and support teams.
• Training of industrial personnel on repair and maintenance
welding techniques.
• Customer-focussed Authorised Dealer Network.
• Calls / Seminars / Approvals / Documentation.
• Consumer operated stores.
• In short: total service and application-oriented solutions.
05
PRODUCTS & SERVICES
Our products and services are categorized as follows:
Tubular Electrodes
PRODUCT SPECTRUM
06
ALLIANCES
Within the scope of the above product groups, in addition
to the in-house manufacturing program, we represent the
following global brands in India
07
ADOR FONTECH PROMISE
08
• Tough abrasion resistant wear parts manufacturing partner of
HARDOX Sweden.
• Also included in the product spectrum, a range of equipment for
arc (GTAW/FCAW/GMAW/PLASMA) welding, cutting, brazing
and thermal coating processes.
• A qualified and trained Application Engineering Specialists at all
industrial locations to give you round-the-clock service before,
during and after sales.
• Full fledged state of the art “centre for reclamation and
surfacing solutions” Training centre conducts custom built
programme using latest technological evolution virtual welding
simulator to create awareness regarding the latest reclamation
techniques resulting in to millions of saving to industries.
• FRS reclamation centre for taking up turnkey repair and
rebuilding job work using both welding and thermal spray
coating processes.
• Within the scope of the above product groups, in addition to the
in-house manufacturing programme, the Company exclusively
represents the following internationally well-known brand
names in India.
09
EVOLUTION OF WELDING TECHNOLOGY
Ever since man discovered metal, he has put it to countless
uses in his everyday life. He has learnt to extract it from its ores,
purify it, alloy it with other metals and shape it for his needs. In
the process he acquired very many techniques to give it
strength and durability. He learnt to combine separate metals
and create alloys. When metals wore out or cracked he learnt
to repair and reclaim them. The first primitive steps to this
process were forging and soldering. Over the years and
especially during the last two centuries, welding technology
has evolved in to a sophisticated science not only to join metal
parts but reinforce them with strength that could withstand
tremendous operational stresses.
10
THE NEED FOR CONSERVATION
The wide spread use of metals in everyday life from house hold
gadgets to industry and space craft has led to an increase in the
demand for all types of metals like iron, steel, aluminum and its
alloys, cobalt, chromium, nickel etc. cost of these metals has
risen steadily and resources are depleting fast. Wear and tear of
machinery results in crores of rupees worth metal parts ending
up in scrap yards. New parts are expensive and are not easily
available at site. Recycling i.e., making use of damaged or worn
out parts by welding, has become a necessity and useful tool in
conservation of resources. With the advanced techniques of
welding a wide range of metals and their alloys can be saved
and recycled.
11
LH-ALLOY TECHNOLOGY
All these factors play important roles in minimizing the ill effects
of heat in the base metal.
12
LH-ALLOY combines the advantage of welding tehcnology with
the specific needs and properties of the meal to be welded.
As shown in the examples of cast iron welding, proper procedure
and care is needed to achieve success in any reclamation job.
MAINTENANCE PROGRAMME
Take a look at the scrap in your yard, the inventory of spares
required every year, the money spent on new parts, production
losses while you wait for replacement and you will see the need
for a maintenance programme, a system that calls for better
utilisation of resources and offers substantial savings through
planned maintenance.
13
14
NEW PRODUCTS
FOR 2018
LH-CAST HEAL 113 F
High nickel electrode for repairing
of all types of weldable cast iron
parts with excellent machinability
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 70-100 120-150
16
LH-TUF TECH 58
A unique martensitic
Fe-Ti-Cr-C alloy system for
wear facing against severe
impact and abrasion
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 100-150 140-180
17
LH-WEAR THERM 65
A special surfacing electrode for
application on severe abrasion and
erosion at elevated temperatures
18
19
00
2 4
ELECTRODES FOR
MMAW PROCESS
STEEL
SPECIFIC EFFECTS OF
ALLOYING ELEMENTS IN STEEL
ALUMINIUM
• De-oxides efficiently
• Restricts grain growth (by forming dispersed oxides
or nitrides)
• Alloying element in nitriding steel
CHROMIUM
• Increases resistance to corrosion and oxidation
• Increases hardenability
• Adds some strength at high temperatures
• Resists abrasion and wear (with high carbon)
MANGANESE
• Counteracts brittleness from sulphur
• Increases hardenability inexpensively
• Contributes to increased tensile strength
• Imparts work-hardening property to steel
22
MOLYBDENUM
• Raises grain-coarsening temperature of austenite
• Deepens hardening
• Counteracts tendency towards temper brittleness
• Raises hot and creep strength, hot hardness
• Enhances corrosion resistance in stainless steels
• Forms abrasion-resisting particles
NICKEL
• Strengthens un-quenched or annealed steels
• Toughens pearlitic-ferritic steels (especially at low temperature)
• Renders high-chromium iron alloys austenitic
• Imparts work-hardening property to steel
SILICON
• Used as general-purpose de-oxidiser
• Alloying element for electricalt and magnetic steels
• Improves oxidation resistance
• Increases hardenability of steels carrying
non-graphitizing elements
• Strengthens low-alloy steels
S TE E L 23
LH 103
A contact electrode
for speedy, all-position
welding of mild steel
WELDING CURRENT
Current AC/DC
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-80 75-100 100-135 125-150
24 S TE E L
LH 104
Low hydrogen
electrode for medium-
tensile, ductile steel welds
PROCEDURE
Clean the area to be welded.
Adopt short arc, on DC power
source with reverse polarity.
It is recommended to dry the
electrode at 300°C for one hour
before use to get better results.
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 60-85 100-140 140-180 170-220
S TE E L 25
LH 105 LMP
Electrode for low and
medium carbon steels as well
as medium tensile steels of
various compositions
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 60-85 100-140 140-180 160-210
26 S TE E L
LH 106
Electrode for high strength
and extreme crack- resistance
to all steels
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 1.6x250 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 25-35 50-75 110-150 90-140 140-180
S TE E L 27
LH 106 SMP
Austeno-ferritic electrode
with excellent ductility
and high tensile strength
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-70 80-110 110-150 140-180
28 S TE E L
LH 107
Electrode for high
resistance to heat
and corrosion
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 90-110 120-140
S TE E L 29
LH 108
Electrode for welding
austenitic manganese steels
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-70 90-110 120-150 150-180
3 0 S TE E L
LH 109
Electrode for joining SS
to Carbon Steel and for
depositing SS overlays on
Carbon Steel
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 80-110 110-140 120-150
S TE E L 31
LH 1061
Austeno-ferritic, highly
crack-resistant electrode
having high tensile strength
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 80-100 100-140
32 S TE E L
LH 1105
Extra low hydrogen controlled
electrode with good ductility
and creep resistance
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 60-90 90-130 130-180 190-220
S TE E L 33
LH 1106
Austeno-ferritic alloy steel
electrode for high strength
and crack-resistant welds
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-80 80-100 110-140
3 4 S TE E L
FURNACE CHARGING
DISTRIBUTOR
COMPONENT
Shaft Furnace Charging Distributor HBI
Module 5 & 6
PRODUCTS USED
Hardfacing products - FCW O-7065
S TE E L 35
36
ELECTRODES FOR
MMAW PROCESS
CAST IRON
TYPICAL CHEMISTRY OF
CAST IRON AND CAST STEEL
DUCTILE GREY MALLE- CAST
CAST CAST ABLE IRON
IRON IRON IRON
Mg 0.03-0.08 - - -
3 8 C A S T I RO N
LH 111
Electrode with special
coating for welding
of cast iron
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 80-100 90-120
C A S T I RO N 39
LH 115
Outstanding electrode for
nodular and grey cast iron.
Electrode for cold welding
of cast iron
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 70-110 90-140
4 0 C A S T I RO N
LH 117
Non-machinable electrode
for welding cast iron
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 90-120 100-140
C A S T I RO N 41
LH 119
Extremely crack resistant
nickel iron alloy electrode
for welding cast iron
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 90-120 100-130
42 C A S T I RO N
LH 119S
Crack resistant nickel-iron
electrode for welding all
types of machinable low alloy
and unalloyed cast iron
TYPICAL APPLICATIONS
Cold welding of all types of
unalloyed and low alloy cast
irons, malleable cast iron,
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 90-120 100-130
C A S T I RO N 43
LH 1115
Electrode for cold welding
of all grades of cast iron
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 80-100 100-130
4 4 C A S T I RO N
LH 1119
Crack-resistant nickel-iron
alloy electrode for welding
different grades of cast irons
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 90-110 100-130
C A S T I RO N 45
46
ELECTRODES FOR
MMAW PROCESS
STAINLESS STEEL
LH 124
Austenitic stainless
steel electrode for
welding AISI 304, 304L
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-70 80-100 100-140
4 8 STAINLESS STEEL
LH 125
Austenitic stainless steel
acid-resistant electrode
for welding AISI 316, 316L
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 80-100 100-140
STAINLESS STEEL 49
LH 126
Fully Austenitic heat resistant
stainless steel electrode for
welding 25/20 stainless steels
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 90-110 120-140
50 STAINLESS STEEL
LH 126 HC
For welding HK30,
HK40 and similar
heat-resisting alloys
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 90-110 130-160
STAINLESS STEEL 51
LH 127
Electrode for welding and
surfacing 13% chromium
steels, hydro-turbines
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 80-110 120-150
52 STAINLESS STEEL
LH 128
Austenitic electrode
for welding high alloy
and unalloyed steels
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-75 90-110 120-150
STAINLESS STEEL 53
LH 330 HC
For HK40, HK60
and similar heat-
resisting alloys
TECHNICAL DATA
UTS 60-65 kgf/mm2
Elongation 25% min.
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60- 80 90-110 120-150
54 STAINLESS STEEL
LH 1125
A new generation austenitic
stainless steel electrode
with special features
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-75 80-110 120-150
STAINLESS STEEL 55
56
ELECTRODES FOR
MMAW PROCESS
NON-FERROUS
LH 206
Electrode for welding
pure copper
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 90-130 150-170
58 COPPER ALLOYS
LH 214 AC
Tin-bronze electrode for
welding bronze parts
WELDING CURRENT
Current AC
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-90 90-110 120-150
COPPER ALLOYS 59
LH 214 DC
Tin-bronze electrode
for welding bronze
parts with DC
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 90-110 120-150
60 COPPER ALLOYS
LH 215
Aluminium bronze
electrode
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-90 90-110 120-150
COPPER ALLOYS 61
LH 409
Electrode for welding
aluminium
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 70-90 90-110 120-150
62 COPPER ALLOYS
63
64
FILLER RODS FOR
OXY-FUEL PROCESS
FLUX-COATED
BRAZING
LH 210 SF
Flexible coated special
brass brazing alloy with
good strength
AVAILABILITY
Size (Ø mm)/Length 1.6x500 2.5x500 3.2x500
66 FLUX-COATED BRAZING
LH 306
Silver brazing flux coated filler
rod with high silver content and
lowest bonding temperature
AVAILABILITY
Size (Ø mm)/Length 1.6x500 2.5x500 3.2x500
FLUX-COATED BRAZING 67
LH 314
Cadmium-free flux coated
brazing filler rod with high
silver content
AVAILABILITY
Size (Ø mm)/Length 1.6 x 500 2.5 x 500
6 8 FLUX-COATED BRAZING
LH 700 F
Flexible coated wear
resistant bronze alloy
AVAILABILITY
Size (Ø mm)/Length 3.2 x 500
FLUX-COATED BRAZING 69
70
FILLER RODS FOR
OXY-FUEL PROCESS
SILVER BRAZING
Ag 301
Cu-Ph brazing filler rod
with silver content
AVAILABILITY
Size (Ø mm)/Length 1.6 x 500 2.5 x 500 3.2 x 500
72 SILVER BRAZING
Ag 301 SPL
Cu-Ph alloy containing
high silver content
AVAILABILITY
Size (Ø mm)/Length 1.6x500 2.5x500 3.2x500
SILVER BRAZING 73
Ag 302
Cu-Ph brazing filler rod
with high silver content
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
SHIM (TxWxL) (Std Pkg 1 Kg) 0.1x60x120 0.2x60x120
74 SILVER BRAZING
Ag 306
Silver brazing filler rod with
high silver content which
bonds at low temperature
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
SHIM (TxWxL) (Std Pkg 1 Kg) 0.1x60x120 0.2x60x120
SILVER BRAZING 75
Ag 309
Nickel alloyed silver filler
rod with high silver content
for brazing hard metals
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
SHIM (TxWxL) (Std Pkg 1 Kg) 0.1x60x120 0.2x60x120
76 SILVER BRAZING
Ag 310
Special filler metal with
high silver content for
brazing hard metals
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
SILVER BRAZING 77
Ag 311
Cadmium-free silver
brazing filler rod for food
industry applications
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
78 SILVER BRAZING
Ag 314
Cadmium-free brazing
filler rod with high
silver content
AVAILABILITY
Size (Ø mm)/Length (Std Pkg 1 Kg) 1.6 x 500 2.5 x 500 3.2 x 500
SHIM (TxWxL) (Std Pkg 1 Kg) 0.1x60x120 0.2x60x120
SILVER BRAZING 79
Ag 316
Silver alloy with low
melting point
AVAILABILITY
Size (Ø mm)/Length 1.6 x 500 2.5 x 500 3.2 x 50
8 0 SILVER BRAZING
81
82
ELECTRODES FOR
MMAW PROCESS
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 90-110 110-140
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 90-120 110-140
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 90-100 110-130
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 60-80 90-110 110-140 140-160
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 60-80 100-120 120-140
88
0 4 NICKEL & NICKEL ALLOYS
LH 524
Ni-Cr-Mo stick electrode
with basic flux coating
for temperature and
corrosion resistance
SPECIFICATIONS 3, 15 Mn Ni 6 3, 13 Cr Mo 4 4, 10
Alloy Basis Cr, Ni, M0, Mn, Nb, Fe Cr Mo 9 10 u. X 8 Ni 9. Specially
AWS / A 5.11 Ni Cr Mo-3 suitable in sea water and offshore
plants, chemical-engineering
PROPERTIES (nitric, sulphuric, hydrochloric,
The weld deposit is resistant phosphorous acid as well as
to seawater corrosion, wide alkalis), flue gas dust collectors.
variety of acids and alkalis.
High resistance to pitting, PROCEDURE
crevice, inter-crystalline and Clean the work piece thoroughly
stress corrosion cracking. High for a crack and porosity free
temperature strength and deposit. Adopt short arc and
oxidation stability. ensure minimum heat input
using lowest possible amperage,
TECHNICAL DATA follow stringer bead technique.
UTS 76-80 kgf/mm2 Dry electrode for 1 hour at 300ºC
Elongation 30-35% to remove moisture. The crater
to be filled properly by back
TYPICAL APPLICATIONS whipping or dwelling. The crater
To join and hard-surfacing of to be filled properly by back
identical or similar grades of whipping or dwelling.
heat-resisting steels and alloys.
Also for welding alloy steels like
H 11, H 13, 17 Mn 4, St E 355, 15 Mo
WELDING CURRENT
Current DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-80 80-110 110-140
SOLDERS
SOLDER 611
Lead-free silver-bearing
soldering alloy
TECHNICAL DATA
Melting range 227-240ºC
Shear strength on copper
3 kgf/mm2
Electrical conductivity
7.5 Sm/mm2
Source of heat Oxy-acetylene
torch, blowlamp, soldering iron,
dip bath
AVAILABILITY
Standard Size 0.5 & 1.0 Kg
92 SOLDERS
PASTE 612
Highly activated
tinning paste
AVAILABILITY
Standard Size 0.5 Kg
SOLDERS 93
RADIATOR
COMPONENT
Copper Radiator
PRODUCTS USED
PASTE 612
0
944 SOLDERS
95
96
ELECTRODES FOR
MMAW PROCESS
HARD FACING
QUESTIONS TO ANSWER
BEFORE HARD FACING
1. What is the hard faced part of equipment supposed to do?
If a material is to be processed, what is its nature?
10. What is the importance of shortest possible arc and stringer bead
technique in this hard facing range?
98 HARD FACI N G
LH 708
Hot work tool
steel electrode
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-70 90-110 140-160 190-230
HARD FACI N G 99
LH 710
Electrode for tough and
wear-resistant against
friction
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 80-110 110-160 140-180
10 0 HARD FACI N G
LH 710 BF
Specially designed
electrode for surfacing of
dies and tools in forging
industry
TYPICAL APPLICATIONS
Forging dies for filling all
types of die impressions or
cavities. Joining and buildup on
all drop-forging tools such as
punches, dies, inserts, etc. Repair
of damaged or worn out profiles.
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 90-120 110-140 160-190
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 40-70 100-130 120-170 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)//Length 3.2x350 4.0x350 5.0x350
Current (amps) 100-140 120-170 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-80 90-100 110-130 160-210
10 4 HARD FACI N G
LH 717
Corrosion and
oxidation resistant
for surfacing & joining
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5 x350 3.2x350 4.0x350 5.0x350
Current (amps) 70-110 90-120 110-140 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 90-110 110-140
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)//Length 3.2x350 4.0x350 5.0x350
Current (amps) 90-110 110-140 140-180
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 5.0x350
Current (amps) 130-150
10 8 HARD FACI N G
LH 725
Surfacing electrode
with chromium
carbide deposits
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)//Length 3.2x350 4.0x350 5.0x350
Current (amps) 100-130 110-140 140-180
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 110-120 140-160
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)//Length 4.0x350
Current (amps) 120-160
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 40-70 90-120 120-150 160-210
PROCEDURE
Hold short/ medium arc with
low current to prevent excessive
dilution with parent metal.
The recommended hardness is
obtained on second or third layer.
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 120-140 140-180 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 100-130 130-150 210-250
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 100-140 130-170 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 100-140 120-160 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 110-130 130-150 160-210
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 110-130 130-170 160-210
WELDING CURRENT
Current AC/DC (-)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 250-350 300-400 350-500
PROPERTIES PROCEDURE
Special electrode with an After striking the arc, swing
exothermic coating which gives the arc back and forth as in
a stable arc during the cutting or see-saw motion. Maintain the
piercing process. The kerfs are motion and at the same time
clean and narrow. Suitable for all dig the arc deeper and deeper
positions and all conducting into the metal. For piercing
metals. Produces negligible slag. holes, push the arc in and out
until the metal is pierced. Use
TYPICAL APPLICATIONS DC with electrode negative for
Cutting and piercing of steel, best results.
cast iron, copper materials,
aluminium. Excellent for burning
rivets, dismantling work at site
and for cutting off unwanted
metal in foundry castings.
Making holes in wear plates at
site. Oxyacetylene or compressed
air need not be used.
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x450 4.0x450 5.0x450
Current (amps) 200-280 300-400 350-500
SP SERIES
SPEM 0010
Electrode for high
strength and extreme
crack resistance
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 45-75 90-110 100-140 125-150
126 SP SERIES
SPHF 043
Chromium-iron type
alloyed electrode for
good temperature and
abrasion resistance
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 90-110 120-150 130-160
SP SERIES 127
SPSP 0050
A nickel base
super-alloy electrode
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 70-120 100-130 130-170
128 SP SERIES
SPGW 0070
General purpose
electrode for welding mild
and structural steels
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 50-90 80-125 110-140 130-160
SP SERIES 129
SPFI 0100
For repair of dies in
forging industry
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350 5.0x350
Current (amps) 40-70 100-130 120-150 130-160
13 0 SP SERIES
SPAC 0400
Electrode for welding
Inconel 600 and similar nickel
base, composition alloys
SP SERIES 131
SPCI 0600
Electrode for
welding high strength
nodular cast iron
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 40-80 70-110 90-120
132 SP SERIES
SPCP 2209
Electrode for welding
corrosion resistant
duplex stainless steels
TECHNICAL DATA
UTS 70-84 kgf/mm2
Elongation 30-35%
WELDING CURRENT
Current AC/DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-70 70-90 110-150
SP SERIES 133
EXCAVATOR BUCKET
RE-CONDITIONED
COMPONENT
EX-1100 & EX-1200
PRODUCTS USED
ENDURAPLATE, LH 108, LH 104 & LH 743 S
13 4 SP SERIES
135
136
FILLER RODS AND
WIRES FOR TIG / MIG /
SAW PROCESSES
STAINLESS STEEL
13 8
21
WRC ferrite
Austenite
20 number
19 Prior
0
magnetic
2
18 percent
4
ferrite
17 6
8
16 10
0% 12
15 2% 14
Sc 16
h 4% 18
14 A+ aeffl
M er 6%
lin
e %
7.6 %
13 . 2
9 %
.7
WRC DIAGRAM
10 %
12 .3
10
16 17 18 19 20 21 22 23 24 25 26 27
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
14 0 STAINLESS STEEL
TIG/MIG 120 S*
Austenitic, columbium-stabilized,
stainless steel filler rod / wire for
TIG/ MIG welding processes
TECHNICAL DATA
UTS 52-64 kgf/mm2
Elongation 35-45%
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
NOTE
Also available with CEA marking as an option.
TECHNICAL DATA
UTS 52-64 kgf/mm2
Elongation 30-35%
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
14 4 STAINLESS STEEL
TIG/MIG/SAW 121 Si
Austenitic Cr-Ni-Mo stainless steel
filler rod/wire with higher silica for
TIG/MIG/SAW welding processes
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
14 6 STAINLESS STEEL
TIG/MIG/SAW 123
Austenitic stainless steel filler
rod/wire for welding dissimilar
steels, AISI 309 SS by
TIG/MIG/SAW processes
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
25 kg Spools for SAW welding.
14 8 STAINLESS STEEL
TIG/MIG 123 L Mo
Austenitic stainless steel filler
rod/wire for welding dissimilar
steels and buffer layers
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
NOTE
Also available with marking as an option.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
TECHNICAL DATA
UTS 66-73 Kgf/mm2
Elongation 22-24%
Impact energy 52 J (ISO-V/20ºC)
Shielding Gas Welding grade
argon, helium
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
PRODUCTS USED
LH 125
TECHNICAL DATA
UTS 17-28 Kgf/mm2
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
162 CO PPE R
TIG/MIG 200 R
Copper welding filler
rod/wire with good
flowing properties
TECHNICAL DATA
Source of heat Oxy-acetylene
or TIG torch
Flux FLUX 200
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
CO PPE R 163
TIG/MIG 202
Silicon bronze filler rod/
wire for TIG/MIG welding
TECHNICAL DATA
UTS 35-40 Kgf/mm2
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
16 4 CO PPE R
156
TIG/MIG 203 A
Copper-tin (phosphor bronze)
filler rod/wire for welding copper
alloys by TIG/MIG processes
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 00 mm in 5 kg. & 1000 mm in 10 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
CO PPE R 165
TIG 204
Copper-Phosphorus
filler rod with additives
for TIG welding
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. for TIG welding.
166 CO PPE R
BRAZE 210
Brass filler rod for
brazing of steels, cast
iron & copper alloys
TECHNICAL DATA
Source of heat Oxy-
acetylene torch, furnace, high
frequency induction.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2, 4.0, 5.0 & 6.3 mm dia in 500/1000 mm length.
Packing 500 mm in 5 kg. & 1000 mm in 10 kg.
CO PPE R 167
TIG/MIG 215
Aluminium bronze
filler rod/wire for TIG/
MIG welding
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
16 8 CO PPE R
TIG/MIG 215 SPL
Aluminium bronze filler
rod for TIG/MIG welding
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. packing for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
CO PPE R 169
TIG/MIG 217
Aluminium bronze
filler rod/wire for
TIG/MIG welding
TECHNICAL DATA
UTS 38-46 Kgf/mm2
Melting range 1030-1040ºC
Electrical conductivity
8 Sm/mm2
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
170 CO PPE R
171
172
FILLER RODS AND
WIRES FOR TIG / MIG
PROCESSES
ALUMINIUM &
ALUMINIUM ALLOYS
TIG/MIG 400
Pure aluminum filler
rod/wire for oxy-
acetylene, TIG and MIG
welding processes
TYPICAL APPLICATIONS
Used for welding pure aluminum,
1000 series, Al 99.8, Al 99.7, Al 99.5,
E-Al. Tanks, brackets, bus bodies
etc. Preheat thick plates (over 15
mm) to 150ºC.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
TYPICAL APPLICATIONS
Used in ship building, off shore,
cryogenic equipment, aluminum
bridges, railway constructions,
automobile industry, welding
of AlMg 4, 5Mn, AlMg 5, AlMg
2MnO2, AlZnMg1, AlZnMgCuO,
5, AlMgSiO, 5, AlMgSil, G-AlMg10,
G-AlMg5, G-AlMg3Si, G-AlMg5 Si.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
TYPICAL APPLICATIONS
Used for welding aluminum
magnesium alloy base metal
as per DIN 1725 Bl. 1 and Bl. 2,
e.g. Al Mg 3, Al Mg 5, Al Mg Mn,
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
TECHNICAL DATA
Shielding gas
Welding grade argon
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 7 kg. spool for MIG welding.
TECHNICAL DATA
Melting range 570-625ºC
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 7 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.2 & 1.6 mm dia in 6.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0 1.2 & 1.6 mm dia in 12.5 kg spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
TECHNICAL DATA
UTS 114-116 Kgf/mm2
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
Spools 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 kg. spool for MIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
AVAILABILITY
Standard Size 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length.
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. for TIG welding.
TUNGSTEN CARBIDE
WC 728
Flux coated composite
rod containing tungsten
carbide crystals in German
silver alloy matrix
TECHNICAL DATA
Working temperature 910ºC
Hardness of tungsten carbide
70-75 HRC
Flame Oxy-acetylene
Flux FLUX 728 (paste),
FLUX 728 P (powder)
AVAILABILITY
Standard Size 3.2 mm dia. x 430 mm
Carbide Meshes (mm) -3.2 +1.5 -5 + 3.2 -6 + 5 -10+ 6
Colour White Yellow Light Green
Cream
2 0 0 TUNGSTEN CARBIDE
WC 729
Baked tungsten
carbide coated wire for
oxy-acetylene application
TUNGSTEN CARBIDE 2 01
DRI PADDLES
COMPONENT
Hot DRI Screws and Paddles
PRODUCTS USED
SS 309 LS Grade Paddles, LH 521, LH 7461
2 02 TUNGSTEN CARBIDE
203
204
FILLER RODS AND WIRES
FOR TIG PROCESSES
TITANIUM
TIG 081
Filler rod/wire for
welding commercial
pure titanium
AVAILABILITY
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. packing.
2 06 TITANIUM
TIG 082
Filler rod/wire for welding
titanium alloy type 6AL-4V
TYPICAL APPLICATIONS
Widely used in cryogenic,
petrochemical and aircraft
industry. Aircraft uses would
AVAILABILITY
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. packing.
TITANIUM 2 07
TIG 083
Filler rod / wire for welding
titanium alloy type 6AL-4V with
extra low interstitial content
AVAILABILITY
Packing 500 mm in 2 kg. & 1000 mm in 5 kg. packing.
2 0 8 TITANIUM
209
210
TUBULAR ELECTRODES
FOR MMAW PROCESS
TUBULAR ALLOYS
TA 1
Versatile alloy with
excellent abrasion
resistance
WELDING CURRENT
Current DC (±) / AC (70 V)
Size (Ø mm)/Length 6.3x450 8.0x450 10.0x450
Current (amps) 70-145 80-140 110-170
WELDING CURRENT
Current DC (±) / AC (70 V)
Size (Ø mm)/Length 6.3x450 8.0x450 10.0x450
Current (amps) 70-145 80-140 110-170
WELDING CURRENT
Current DC (±) / AC (70 V)
Size (Ø mm)/Length 6.3x450 8.0x450 10.0x450
Current (amps) 70-145 80-140 110-170
WELDING CURRENT
Current DC (±) / AC (70 V)
Size (Ø mm)/Length 6.3x450 8.0x450
Current (amps) 70-145 80-140
WELDING CURRENT
Current DC (±) / AC (70 V)
Size (Ø mm)/Length 6.3x450 8.0x450 10.0x450
Current (amps) 70-145 80-140 110-170
WELDING CURRENT
Current AC / DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 90-110 120-140
22 0 ZI PARC
SS 36 E
Stainless steel electrode
for fabrication welding
of AISI 316, 316L
SPECIFICATIONS PROCEDURE
AWS/SFA – 5.4 316 L-16 De-grease and clean the area
UNS No. W31613 to be welded, prepare 60º V
groove. Use jigs and fixtures
PROPERTIES appropriately to avoid distortion.
The weld deposits are corrosion Connect the electrode on DC EP.
and scale resistant with extra Hold short arc, deposit stringer
low carbon content. Easy arc beads. Austenitic stainless steels
striking and re-striking, flat should not be pre-heated.
shining bead and free from
inter-granular corrosion. RE-DRYING CONDITIONS
Un opened electrodes should
TECHNICAL DATA be baked at 300ºC for 1 hr. (As
UTS 50 kgf/mm2 an option vacuum packing is also
Elongation 30-40% available in which case re-dring
is not required).
TYPICAL APPLICATIONS
Austenitic stainless steel
electrode SS36E recommended
for fabrication of AISI 316, 316L,
18/8 Avesta 832SK etc, which
are used in chemical plants,
dye works, food & breweries,
hospital equipment.
WELDING CURRENT
Current AC / DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 90-110 120-140
ZI PARC 221
SS 39 E
Austenitic electrode
for welding high alloy
and unalloyed steels
RE-DRYING CONDITIONS
Un opened electrodes should be
baked at 300ºC for 1 hr. (As an
option vacuum packing is also
available in which case re-dring
is not required).
WELDING CURRENT
Current AC / DC (+)
Size (Ø mm)/Length 2.5x350 3.2x350 4.0x350
Current (amps) 50-75 90-110 100-130
222 ZI PARC
HF 61 E
Hardfacing electrode with
extreme abrasion-resistance
WELDING CURRENT
Current AC / DC (+)
Size (Ø mm)/Length 4.0x350 5.0x350
Current (amps) 120-160 150-200
ZI PARC 223
HF 64 E
Highly wear resistant, tough
surfacing electrode against
impact and abrasion
WELDING CURRENT
Current AC / DC (+)
Size (Ø mm)/Length 3.2x350 4.0x350 5.0x350
Current (amps) 90-120 110-160 150-200
224 ZI PARC
SA 81 E
Crack-resistant ferro-nickel
electrode for welding all
types of cast irons
WELDING CURRENT
Current AC / DC (-)
Size (Ø mm)/Length 3.2x350 4.0x350
Current (amps) 70 - 100 100 – 130
ZI PARC 225
EXCAVATOR
BUCKET
COMPONENT
Bucket
PRODUCTS USED
ZIPARC HE 62 E & HF 60 E
226 ZI PARC
227
228
ADFL PRODUCT
RANGE
SELF SHIELDED
FLUX-CORED WIRES
DIS-SIMILAR STEEL
O-2060 UTS : 68 kgf/mm2 Joining and buildup of unknown steels
O-2061 UTS : 80 kgf/mm2 Joining and buildup of unknown steels
O-7015 UTS : 55 kgf/mm2 18/8/5 type wire
O-7015 H UTS : 55 kgf/mm2 Joining and buildup of armour steels
23 0 FLUX- CO RE D WI RE S
Product Properties Applications
ABRASION
O-7050 Hardness : 48-52 Rc Impact applications
O-7060 Hardness : 60-62 Rc Rebuilding of grinding rolls
O-7062 Hardness : 52-56 Rc Severe abrasion up to 450°C
TUNGSTEN CARBIDE
O-7075 Hardness : 60-63 Rc Tungsten carbide deposit
STAINLESS STEEL
SS 308 Lt1 UTS : 55 kgf/mm2 Joining of SS 304 / 308 L
SS 309 Lt1 UTS : 58 kgf/mm2 Joining of SS 309 L & dissimilar steels
SS 309 LMot1 UTS : 58 kgf/mm2 Joining of SS 309 LMo & dissimilar steels
SS 316 Lt1 UTS : 56 kgf/mm2 Joining of SS 316 L
04 FLUX- CO RE D WI RE S 231
COBALT AND NICKEL BASED
HARDFACING ALLOYS
As an international company,
Kennametal Stellite is synonymous
with quality, offering solutions
to problems encountered in
aggressive working environments
throughout the world.
Stelite® Bal. 31 13 2.5 <3.0 - <2.5 <1.0 <1.0 W73001 (SF)A 5.13 52 Screw components,
alloy 1 ECoCr-C pump sleeves etc.
Stelite® Bal. 29 4 1.2 <3.0 <1.0 <3.0 <2.0 <1.0 W73006 (SF)A 5.13 39-43 Valve-seats pumps
alloy 6 ECoCr-A steam valves,
erosion - shields,
galvanizing roll etc.
Stelite® Bal. 30 8 1.55 <3.0 <1.0 <2.0 <2.0 <1.0 W73012 (SF)A 5.13 45-50 On cutting edges in
alloy 12 ECoCr-B timber, plastic,
paper industry,
turbine blades
scrapper knives etc.
Stelite® Bal. 28 - 0.25 <3.0 5.5 <3.0 <1.5 <1.0 W73021 (SF)A 5.13 28-40* Forging dies, tube
AM 2 Al, Cu 110-130 Corrosion and friction resistant. Excellent Shaft seats, sliders, valve seats, fan
gliding characteristics (metal on metal). blades; suitable for various types of
Machinable with a cutting tool. bronze alloyed parts in the chemical
and mechanical industries and
shipbuilding.
AM 3 Cr, Ni, 239-260 Corrosion and wear resistant. Overlaying of ball bearing and pin
Mo, Fe Machinable with metal cutting tools. bearing seats, shafts, slider bearings
Excellent bonding characteristics. and bars, etc.
AM 4 Cr, Ni, B, 300-340 Extremely abrasion and corrosion Overlaying of pistons, gaskets for
Al, Si resistant alloy; machinable solely by stuffing boxes, shaft casings or similar
means of filing or turning using a hard parts subject to severe wear, impact
metal lathe. or temperature conditions.
The spray and fuse process is ideal The Spray and Fuse Process
for laying extremely thin, dense involves preheating the job up
and hard protective wear coatings. to 300°C and fusing the powder
Arc welding processes are on the surface to give a long
ineffective and uneconomical on lasting reclaimed part. Machine
account of the possibility of components hardfaced by Spray
distortion and removal of large and Fuse Process outwear steel for
quantity of metal required to have equal hardness by 10-15 times.
thin overlay.
18 8 S PR AY & FU S E PRO CE S S
23
NICKEL TYPE HRC MELTING PROPERTIES
POWDERS RANGE °C
FIXING
The Enduraplate can be welded to
any existing thick motherplate with
Enduraplate is manufactured low hydrogen / stainless steel.
on a state of the art, computer
controlled, double weld head
automatic machine using flux
cored wires which are developed
in-house. ADFL’s expertise, R&D
and field trials help us choose the
right blend of alloys for different
applications. This highly specialized
process ensures the deposits have
maximum carbide concentration
with minimum dilution.
Enduraplate is manufactured
in different grades for specific
applications to combat impact,
abrasion, erosion and heat. These
plates have been successfully
performing in various applications
in cement, steel, power, mining,
construction and several other
core sectorindustries in India
and abroad. Enduraplate application selection
chart is as follows:
1050 20-23 4.0-4.5 Mn, Si, 58-60 Good abrasion and moderate
Ti impact wear. Distribution
Chutes, Troughs, Mill side
liners, Cheek Plates, crusher
liners, Bucket liners, Transition
chutes, cooler ducts.
24 4 D OTE S
• Welding, brazing and thermal ferrous and non-ferrous metals
D OTE S 245
24 6
TECHNICAL DATA
GAS WELDING
HIGH PRESSURE BLOW PIPES
Nozzle sizes, working pressures and gas consumption for various
metal thickness.
18 8 TECH N I C AL DATA
24
PHYSICAL PROPERTIES OF COMMON METALS AND ALLOYS
METALS
1 Aluminium Al 2.7 660 5-7.5
2 Cadmium Cd 8.65 321 3.8
3 Chromium Cr 7.14 1920 -
4 Cobalt Co 8.9 1490 16.5
5 Copper Cu 8.94 1083 12-15
6 Gold Au 19.3 1063 8.2
7 Iron Fe 7.87 1535 14
8 Lead Pb 11.34 327 1
9 Magnesium Mg 1.74 650 11.4
10 Molybdinum M 10.24 2620 50-120
11 Nickel Ni 8.91 1455 25-28
12 Palladam Pd 12 1555 20-126
13 Platinum Pt 21.45 1770 10
14 Silver Ag 10.5 960 8.9
15 Tantalum Ta 16.6 3000 12.63
16 Tin Sn 7.3 232 1.6
17 Titanium Ti 4.51 1727 35-40
18 Tungsten W 19.3 3380 70-250
19 Vanadium V 5.68 1726 36-70
20 Zinc Zn 7.14 4.19 7.6
ALLOYS
1 Steel 7.7-7.85 1450-1520 21-115
2 Grey Cast Iron 7.1-7.3 1150-1250 10-25
3 Austenitic Cr-Ni-Steel 7.8-7.9 1440-1460 38-50
4 Mg. Alloys 1.8-1.83 590-650 11-19
5 Al. Alloys 2.6-2.85 570-655 6-25
6 Zn. Alloys 5.7-7.2 380-420 9-20
7 Brass 8.25 900-950 16-38
8 Bronze 8.56-8.9 880-1040 12-20
18
250 TECH N I C AL DATA
JUDGING TEMPERATURE BY COLOUR (STEEL)
TEMPRETURE ºC LUMINOUS ºC
COLOUR COLOUR
DAIMOND BRALE
150 KGM 60 KGM 100 KGM 1/16” BULL BHN VICKERS SCLEROSCOPE
SCALE C SCALE A SCALE D 100 KGM
SCALE B
80 92 87 - - - -
79 92 86 - - - -
78 91 85 - - - -
77 91 84 - - - -
76 90 83 - - - -
75 90 83 - - - -
74 89 82 - - - -
73 89 81 - - - -
72 88 80 - - - -
71 87 80 - - - -
70 87 79 - - - -
69 86 78 - - - -
68 85 76 - - - -
65 84 75 - 745 820 91
64 84 74 - 710 763 88
63 83 73 - 710 763 87
62 83 73 - 682 746 85
61 82 72 - 682 720 83
60 81 71 - 653 697 82
59 81 70 - 627 674 80
58 80 69 - 578 653 78
57 80 69 - 578 633 77
56 79 68 - 555 613 75
55 79 67 - 555 595 74
54 78 66 - 534 577 72
53 77 65 - 514 560 71
52 77 65 - 495 544 69
51 76 64 - 495 528 68
50 76 63 - 477 513 67
49 75 62 - 461 498 65
48 75 61 - 444 484 64
47 74 61 - 444 471 63
18
252 TECH N I C AL DATA
HARDNESS CONVERSION (CONTD)
DAIMOND BRALE
150 KGM 60 KGM 100 KGM 1/16” BULL BHN VICKERS SCLEROSCOPE
SCALE C SCALE A SCALE D 100 KGM
SCALE B
46 73 60 - 432 458 62
45 73 59 - 415 446 61
44 73 59 - 415 434 59
43 72 58 - 401 423 58
42 72 57 - 388 412 56
41 71 56 - 388 402 55
40 70 55 - 375 392 54
39 70 55 - 363 382 53
38 69 54 - 352 372 51
37 69 53 109 341 363 50
36 68 52 109 331 354 49
35 68 52 108 331 345 48
34 67 51 108 321 336 46
33 67 50 107 311 327 45
32 66 49 106 302 318 44
31 66 48 106 293 310 43
30 65 48 105 285 302 42
29 65 47 104 277 294 41
28 64 46 103 269 286 40
27 64 45 103 262 279 39
26 63 45 102 255 272 38
25 63 44 101 255 266 37
24 62 43 100 248 260 37
23 62 42 99 241 254 36
22 62 42 99 235 248 35
21 61 41 98 229 243 35
20 61 40 97 223 238 34
18 - - 95 217 230 33
16 - - 94 212 222 32
14 - - 92 203 213 31
12 - - 90 192 204 29
41A 0.25-0.35 < 0.65 < 0.40 1.4-1.8 0.1-0.25 S&P < 0.05 R. 45 20 40 H and T 6”
Si 0.10-0.45 S. 50 19 40 H and T 4”
Al. 0.9-1.30 T. 55 17 35 H and T 2.½”
41B 0.35-0.45 < 0.65 < 0.40 1.4-1.8 0.1-0.25 S&P < 0.05 R. 45 20 40 H and T 6”
Si 0.10-0.45 S. 50 19 40 H and T 4”
Al. 0.9-1.30 T. 55 17 35 H and T 2.½”
45 0.5-0.6 0.7-1.0 - - - S&P < 0.05 Mechanical properties are not part of the
Si 1.5-2.0 contractual obligations of these specifications
47 0.45-0.55 0.5-0.8 - 0.8-1.2 - S&P < 0.05 Mechanical properties are not part of the
Si < 0.5 contractual obligations of these specifications
V > 0.15
48 0.45-0.55 0.5-0.8 - 1.0-1.4 - S&P < 0.05 Mechanical properties are not part of the
Si 0.1-0.5 contractual obligations of these specifications
V > 0.15
52 0.45-0.55 0.3-0.6 <0.5 7.5-9.5 - S&P < 0.04 - - 255/293 Hardened and
Si 3.0-3.75 tempered
351 < 0.2 0.6-1.0 0.6-1.0 0.4-0.8 < 0.1 S&P < 0.05 45 18 30 -
Si < 0.35
352 < 0.2 0.5-1.0 0.85-1.25 0.6-1.0 < 0.1 S&P < 0.05 55 15 20 -
Si < 0.35
353 < 0.2 0.5-1.0 1.0-1.5 0.75-1.25 0.08-0.15 S&P < 0.05 65 12 20 -
E 209 0.06 20.5-24.0 9.5-12.0 1.5-3.0 - 4.0-7.0 0.9 0.04 0.03 0.1-0.3 0.75
E219 0.06 19.0-21.5 5.5-7.0 0.75 - 8.0-10.0 1 0.04 0.03 0.1-0.3 0.75
E240 0.06 17.0-19.0 4.0-6.0 0.75 - 10.5-13.5 1 0.04 0.03 0.1-0.3 0.75
E307 0.04-0.14 18.0-21.5 9.0-10.7 0.5-1.5 - 3.3-4.75 0.9 0.04 0.03 - 0.75
E308 0.08 18.0-21.0 9.0-11.0 1.5-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E308H 0.04-0.08 18.0-21.0 9.0-11.0 1.5-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E308L 0.04 18.0-21.0 9.0-11.0 1.5-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E308Mo 0.08 18.0-21.0 9.0-12.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E308MoL 0.04 18.0-21.0 9.0-12.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E309 0.15 22.0-25.0 12.0-14.0 0.75 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E309L 0.04 22.0-25.0 12.0-14.0 0.75 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E309Cb 0.12 22.0-25.0 12.0-14.0 0.75 0.7-1.0 0.5-2.5 0.9 0.04 0.03 - 0.75
E309Mo 0.12 22.0-25.0 12.0-14.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E309MoL 0.04 22.0-25.0 12.0-14.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E310 0.08-0.45 25.0-28.0 20.0-22.5 0.75 - 1.0-2.5 0.75 0.03 0.03 0.75
E310H 0.35-0.45 25.0-28.0 20.0-22.5 0.75 - 1.0-2.5 0.75 0.03 0.03 - 0.75
E310Cb 0.12 25.0-28.0 20.0-22.0 0.75 0.7-1.0 1.0-2.5 0.75 0.03 0.03 - 0.75
E310Mo 0.12 25.0-28.0 20.0-22.0 2.0-3.0 - 1.0-2.5 0.75 0.03 0.03 - 0.75
E312 0.15 28.0-32.0 8.0-10.5 0.75 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E316/CF8M 0.08 17.0-20.0 11.0-14.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
E316H 0.04-0.08 17.0-20.0 11.0-14.0 2.0-3.0 - 0.5-2.5 0.9 0.04 0.03 - 0.75
Annealed Ruling
COMPOSITION PERCENT Hardness HEAT TREATMENT section MECHANICAL PROPERTIES
DIN Grade C Mn Cr Others BHN OQ WQ T dia (mm) YS TS EL
(max) (ºC) (ºC) (ºC) (kgf/mm2) (kgf/mm2) (%)
17222 50CrV4 0.47- 0.8- 0.9- V0.07-0 235 830- - 230- Hardened 160 170/230 5
spring 0.55 1.1 1.2 .12 860 340 & tempered
steel strips
properties
vary
according
to thickness
58CrV4 0.55- 0.8- 0.9- V0.07-0 235 830- - 280- 180 190/240 4
0.62 1.1 1.2 .12 860 340
654 42CrV6 0.38- 0.5- 1.4- V0.07-0
Drawn 0.46 0.8 1.7 .12
steels for
cold
processed
screws
and bolts
1720 16MnCr5 0.14- 1.0- 0.8- - 207 860- - 170- Core zone 60 80-110 10
Case 0.19 1.3 1.1 870 210 of 30mm
hardening dia blank
steels hardening
Annealed Ruling
COMPOSITION PERCENT Hardness HEAT TREATMENT section MECHANICAL PROPERTIES
DIN Grade C Mn Cr Others BHN OQ WQ T dia (mm) YS TS EL
(max) (ºC) (ºC) (ºC) (kgf/mm2) (kgf/mm2) (%)
26 0 TECH N I C AL DATA
0.17 0.6 1.7 830 210
17200 CK45 0.42- 0.5- - - 830- 820- 530- Up to 16 48 75/90 14
Heat 0.5 0.8 206 860 850 670 17 to 40 40 65/80 16
treatable 41 to 100 36 60/72 18
steels 40Mn4 0.36- 0.8- - Si0.25- 217 830- 820- 530- Up to 16 65 90/105 12
0.44 1.1 0.5 860 850 670 17 to 40 55 80/95 14
41 to 100 45 70/85 15
34Gr4 0.3- 0.5- 0.9- - 217 830- 820- 530- Up to 16 80 100/120 11
0.37 0.8 1.2 850 840 670 17 to 40 65 90/105 12
41 to 100 55 80/95 14
25CrMo4 0.22- 0.5- 0.9- Mo0.15- 217 830- 820- 530- Up to 16 65 90/105 12
0.29 0.8 1.2 0.25 860 850 670 17 to 40 55 80/95 14
41 to 100 45 75/85
101 to 250 42 65/80 16
Notes:
P & S Each: 0.35 max. for all grades Si = 0.15-0.35 except 40 Mn 4 where it is given
OQ = Oil Quenched WQ = Water Quenched T = Tempered
Item Dimension Std. No. of Weight Item Dimension Std. No. of Weight
x length packing rods per kg per case x length packing rods per kg per case
(mm) (kg) (approx) (kg) (mm) (kg) (approx) (kg)
LH 100 2.0 X 300 5 94 20 LH 106 1.6 X 250 1 175 5
2.5 X 350 5 51 20 2.5 X 350 2 50 10
3.2 X 350 5 31 20 3.2 X 350 2 30 10
4.0 X 350 5 20 20 4.0 X 350 2 20 10
5.0 X 350 5 13 20 5.0 X 350 2 14 10
LH 103 2.0 X 350 5 94 20 LH 106 N 2.5 X 350 2 53 10
2.5 X 350 5 51 20 3.2 X 350 2 33 10
3.2 X 350 5 31 20 4.0 X 350 2 21 10
4.0 X 350 5 20 20 LH 106 R 3.2 X 350 2 33 10
5.0 X 350 5 13 20 4.0 X 350 2 21 10
LH 104 2.5 X 350 5 50 20 LH 106 SMP 2.5 X 350 2 51 10
3.2 X 350 5 31 20 3.2 X 350 2 30 10
4.0 X 350 5 20 20 4.0 X 350 2 21 10
5.0 X 350 5 13 20 5.0 X 350 2 13 10
LH 104 S 2.5 X 350 5 50 20 LH 107 2.5 X 350 2 48 10
3.2 X 350 5 31 20 3.2 X 350 2 31 10
4.0 X 350 5 20 20 4.0 X 350 2 20 10
5.0 X 350 5 13 20 5.0 X 350 2 13 10
LH 105 LMP 2.5 X 350 5 50 20 LH 107 LCW 2.5 X 350 2 48 10
3.2 X 350 5 31 20 3.2 X 350 2 31 10
4.0 X 350 5 20 20 4.0 X 350 2 20 10
5.0 X 350 5 13 20 LH 108 2.5 X 350 2 49 10
3.2 X 350 2 31 10
274 AD FL N E T WO RK
WEST DIVISIONAL OFFICE
2007-2008, C Wing, Kailash Business Park,
Veer Savarkar Marg, Vikhroli West, Mumbai 400 079
Tel +91 22 6236 2559AD FL
MANUFACTURING PLANT 1
No. 486, B-1, 14th Cross, 3rd Main, 4th Phase
Peenya Industrial Area, Bangalore 560 058
Tel +91 80 2836 5751, 6560 0154 Fax +91 80 2836 5752
MANUFACTURING PLANT 2
No. A-288, 6th Main, II Stage,
Peenya Industrial Area, Bangalore 560 058
Tel +91 80 2836 0988 Fax +91 80 2836 2805
FRS DIVISION
S-60-61, MIDC Industrial Area,
Hingna Road, Nagpur 440 016
Tel +91 7104 237250, 237260 Fax +91 7104 236823
AD FL N E T WO RK 275
Dealer Network Sales Office Head Office Divisional Office
ADOR FONTECH LIMITED
Belview, 7 Haudin Road, Bangalore 560 042 • T +91 80 2559 6045 / 73
E customerservice@adorfon.com • www.adorfon.com