GENERAL CATALOGUE

Content

04 13 22
The Company Key to symbols Double walled
tanks heads

06 14
The catalogue Dished heads table 23
and guide for the Dished head type B
consultation
16
Dished head type D 23
08 Oblong head
Certifications
18
Dished head type E 24
10 Edge bevelling types
Technical notes
20
Dished head type F 26
12 Where we are
Materials
22
Dished head type DE
Introducing

Tecnofondi S.p.A has been producing metal heads for tanks,

reservoirs and boilers since its opening in 1965.
At the beginning the production was specialized for oil tanks for
domestic heating. Later it concerned also the thermo-hydraulic field
(water accumulator, autoclaves, boilers), farming industry (liquid
manure spreader, slurry tanks, filters for water irrigation), building
sector (concrete mixer, tanks for chalk and cement, construction site
tanks), LPG (tanks for domestic and automotive use).

In the last 10 years the production for the supplied sectors has
significantly increased because of the implementation of a unit
exclusively for the production of stainless steel heads up to reaching
the food industry (tanks and plants for the milk and cheese sector,
wine industry, production of fruit juice and beer), chemical and
pharmaceutical industry (agitators, mixers, reactors) and fabric industry
(tanks for the treatment of fabrics).
 The Company

The company has developed 3 different units

which are separated from each other:
• unit for coils and sheets in carbon steel
• unit for heads in carbon steel
• unit for heads in stainless steel and nickel
and aluminium alloys.

1. Unit for coils and sheets

This unit is located in a production hall of 3800m² and dispo-
ses of a flattening plant, which is capable to flatten coils up
to a wideness of 2200mm and up to a thickness of 12mm.
The sheets will be cut according to the requested dimen-
sions of the final customer and at last palletized.
This area disposes of a large pool with a stock of coils
and a large stock of flattened sheets in quality S235JR and
S355JR with the property to be galvanised.
We have also available coils and metal sheets in quality
S275JR , P275NH , P355NH e S355J2G3.

COILS AND STAINLESS

SHEETS UNIT STEEL UNIT

HEADQUARTERS
AND CARBON
STEEL UNIT

4
2. Carbon steel unit
The Carbon steel unit (5500m²) is located in the historical
company headquarters of Tecnofondi together with the ad-
ministration and commercial offices.
It consists of two sectors; one for the production of rolled
heads and one for the production of pressed heads. Auxilia-
ry to the main departments, there are some further depart-
ments (tooling department, welding area, disc cutting and
edge turning).
It has also a large storage of end products, available type D
and E, which will be lengthy explained on the further pages.

3. Stainless steel and nickel and aluminium

alloys department
The stainless steel department (4400m²) is near to the main
department but completely separated from it.
In was built in the year 2008 and it was projected and reali-
zed exclusively for the production of stainless steel heads. It
is subdivided into the following sectors:
• stock of raw material and PVC protective foil applying
• warehouse of standard heads in AISI 304 and AISI 316
• plasma cutting to get discs or half discs
• welding of sheets and half discs
• flanging and dishing department
• cones bending and flanging
• edge trimming
• internal and external grinding.

5
The catalogue
and general guide for the consultation

This catalogue was made to give a complete tool to the

customers in order to verify better the large suggested production
range. So there is the possibility to choose the more fittest heads
for the own construction needs from our heads on stock with
savings of time and money.

Therefore we suggest to read it with attention

and, specially when it has to do with small se- We underline, that the products described in
quences, to base them on this dimensions du- this catalogue are our habitual production.
ring the developments of the projects in order But anyway products with different dimensions
to have them available immediately when they and characteristics will by examined to verify
are needed during the production. their feasibility and the eventual production.

Particularly the tables describe the heads with

dimensions most common sizes, but it is also
possible to realize heads with in-between di-
mensions.
We lastly point out, that the indicated values of
the tables express technical indications, that
anyway have to be reviewed in the order pro-
cedure.

6
7
Certifications

The UNI EN ISO 9001 certification that Tecn- Therefore, the activities of COLD LEVELLING
ofondi has received since 1996, which is con- AND COILS CUT-TO-LENGTH are in compli-
trolled periodically from the charged authority, ance with the existing legislation for the con-
is a guarantee that our company applies in- struction of STRUCTURAL COMPONENTS
ternal procedures for the quality management. AND KIT FOR EXC3 CLASS EXECUTION
Further we are able to monitor the whole pro- STEEL STRUCTURES.
duction process starting from the material pur-
chasing up to the after sales service. Tecnofondi is able to provide the CE marking
and the Declaration of Performance (DOP) for
Tecnofondi has also implemented and cer- those activities, as well as the same certifica-
tified a quality assurance system according tions received from its own qualified suppliers
to the appendix 1 par. 4.3 of the directive for the processed material.
PED 2014/68/EU (ex 97/23/EC), which also
has been verified and certified its organ- The chosen execution class (EXC3) selects
ized system according to the German rules and specifies the appropriate quality level in
AD2000-Merkblatt W0. connection with safety required by the compo-
nent during the construction process.
At the beginning of the year 2016, our society
received the certification UNI EN 1090 from The EN 1090 regulation defines four dominant
the notified body INTERTEK ITALIA SPA. execution classes: EXC1, EXC2, EXC3, EXC4
(with growing level of criticality and perfor-
mance from 1 to 4).

8
UNI EN ISO 9001 AD2000-Merkblatt W0 UNI EN 1090

9
 Technical notes

Production methods and dimensions of the products

The heads are manufactured through two production me-
thods: either through the pressing process (so-called press-
formed heads) or through dishing and flanging/rolling (so-
called rolled heads).
In this way it is possible to get the following dimensions (max):
Diameter: 5000mm
Thickness: 32mm

Welding
If the size of the plate has not the required dimensions,
Tecnofondi will carry out a welding process in order to
make it suitable for manufacturing.

The welding is realized by qualified welders, in full com-

pliance with regulations UNI EN 9606-1 and UNI EN 15614-1.

It is possible to test the welding (through radiographic in-

spection) on request.
For the heads that require it, the RX control is possible after
molding but it must be specified when placing the order.

10
Materials supplied by customers
Material, supplied by customers must have
the following specifications. The blank discs
must have grinded edges and in case of wel-
ded discs, the welding line must have been
made with “x-bevelled” edges to ensure full
and correct penetration. Furthermore, the
welding line will not be executed on the ori-
ginal edges, but after removing at least a part
of 20mm, which is subject to suffer working
fissures (this is not necessary for plates from
coils).
The plates must always be assembled fol-
lowing the direction of rolling.
In case of supplied square plates, their sizes
must always be more than 20mm in compa-
rison to the resulting disc.
It is normal practice for material supplied by
the customer always to get from our techni-
cal office the approval of the dimensions of
the blank discs or square plates before cut-
ting them.

Edge trimming
The dished heads can be supplied with raw
or trimmed edges. Trimming is recommen- Tolerances
ded to obtain the correct height of the dished The tolerances applied for the pressed heads
head and for a perfect flatness of the edge. are defined according to the applicable
We suggest to view the section of the edge norms (particularly the norm AFNOR NF E
trimming in order to indicate the fit edge 81-100).
trimming of your needs. It is also possible to
flange the edge (joggled or beaded edge) in For the rolled heads are as follows:
order to achieve a better fitting of the head On the external diameter:
into the shell, up to a maximum diameter of < Ø 2000 = +/- 2 ‰ • Ø
1800mm and a maximum thickness of 6 mm > Ø 2000 = +/- 3 ‰ • Ø
(tables of flanged edges shown on the fol-
lowing pages). Ovality
(difference between the minimum diameter
and the maximum diameter):
3䥯

Total height
(for heads with raw edge):
-0 + 25mm

11
 Materials

Generally we can work on materials with a maximum tensile

strength of 750 MPa and with a minimum elongation of
22/24%.

Carbon steel
Coils and dished heads made of carbon steel on stock are in:
S235JR according the norm UNI EN 10025-2.
This material can be hot galvanized at the following
conditions:
1 - % maximal Si < 0,03 %
2 - % of Si+2,5P < 0,09 %
(In compliance with the French norm AFNOR A (35-503/94)).

We also have a stock of raw material of carbon steel

plates S355JR and S275JR according to the norm UNI EN
10025-2.

Stainless steel
Stock of stainless steel heads and sheets are made of:
AISI 304 and AISI 316 according to the norm ASTM A240.

12
Key to symbols

D outside diameter

Di inside diameter h height of straight flange

s thickness Ht overall external height

= H+h+s

R dish radius
H overall internal height
without straight flange

r knuckle radius

Sv diameter of the blank

V capacity in litres of the

dished head

13
Dished heads table
Different types of pressed and rolled heads

Type Drawing Technical specifications and dimensions

D R s
A 400 ÷ 5000 2xD 3 ÷ 60
1,5 x D
1xD
0,8 x D

R = 1,5 x D
SV D x 1,015
Ht D x 0,075 + S

R=D
SV D x 1,04
Discs, only dished Ht D x 0,140 + S

B
D r h s
500 ÷ 5000 50 ≥5xS 3 ÷ 30

SV D + 50 + 2h
Ht 50 + h +s

Flat heads with small knuckle radius (p. 23)

C
D r h s
500 ÷ 5000 D/10 ≥5xS 3 ÷ 30

SV D x 1,09 + 2h
Ht D x 0,1 + h + s

Flat heads with big knuckle radius

D D R r h s
500 ÷ 3050 1,5 ÷ 2 D 50 ≥5xS 3 ÷ 32
3100 ÷ 3450 1,5 ÷ 2 D 80 ≥5xS 3 ÷ 32
3500 ÷ 5000 1,5 ÷ 2D 100 ≥5xS 3 ÷ 32

R = 2D r = 50
SV D x 1,03 + 2h
Ht D x 0,090 + h + s

Small knuckle radius dished heads (p. 16-17)

DE
D R r h s
500 ÷ 5000 D 50 ÷ 180 ≥ 5 x S 3 ÷ 32

Medium radius heads (p. 22)

14
• When approaching diameters and maximum • Formulas have strict theoretical value
thicknesses, the feasibility depends on the material • Minimum thicknesses concern rolled heads
to process. For this reason, it is always better to
consult the technical office

Tipo Drawing Technical specifications and dimensions

E
D R r h s
320 ÷ 5000 D D/10 ≥5xS 3 ÷ 32

SV D x 1,11 + 2h
Ht D x 0,194 + h + s

Torispherical heads (p. 18-19)

F
D R r h s
500 ÷ 4000 0,8 x D D/6,5 ≥5xS 3 ÷ 32

SV D x 1,16 + 2h
Ht D x 0,25 + h + s

Semielliptical heads (p. 20-21)

G
D R r h s
500 ÷ 5000 * * ≥5xS 3 ÷ 30

* on request

Inverse flanged dished heads

H
D R h s
500 ÷ 5000 * ≥5xS 3 ÷ 30

* on request

Flat flanged dished heads

I
D r Ht h s d
500 ÷ 3000 * max 1150 ≥ 5 x S 3 ÷ 32 *

Available also without flanging (open cone)

* on request
Cones

15
Dished head type D
Small knuckle radius dished heads

D s R r h Ht Kg. V D s R r h Ht Kg. V
500 1.2 750 35 20 88 2.7 13 l 900 1.5 1500 30 20 113 9 49
 1.5 750 35 20 88 3.5 13 l 2 1500 30 20 113 12 49
l 2 750 35 20 90 4.5 13 l 2.5 1500 30 20 113 15 49
3 750 35 20 90 7 13 l 3 1500 30 20 116 18 49
l 4 1500 30 20 118 24 49
550 1.2 650 40 20 108 2.8 18 5 1500 50 25 125 30 58
l 1.5 650 40 20 108 3.5 18
l 2 650 40 20 110 5 18 l 950 1.5 1900 30 20 105 10 52
2.5 650 40 20 110 6.5 18
l 2 1900 30 20 105 13 52
l 2.5 1900 30 20 107 16 52
l 3 650 40 20 110 7.5 18
l 3 1900 30 20 108 20 52
4 650 40 20 110 10.5 18
l 4 1900 30 20 110 26 52
5 1900 30 20 112 33 52
600 1.2 950 30 20 95 3.4 19
l 1.5 950 30 20 100 4.5 19 l 1000 1.5 2000 30 20 107 11 59
l 2 950 30 20 100 6 19 l 2 2000 30 20 110 15 59
l 2.5 950 30 20 105 7.5 19 l 2.5 2000 30 20 110 18 59
3 950 30 20 108 9 19 l 3 2000 30 30 118 22 67
4 950 30 20 110 12 19 l 4 2000 30 30 120 29 67
5 1600 50 30 150 37 82
650 1.2 1000 30 20 100 3.8 23
l 1.5 1000 30 20 100 5 23  1100 1.5 2000 30 20 110 13 77
l 2 1000 30 20 101 6.5 23  2 2000 30 20 122 17 78
2.5 1000 30 20 101 8.3 23 2.5 2000 30 20 123 22 78
l 3 1000 30 20 102 10 23  3 2000 30 20 123 26 78
4 1000 30 20 102 14 23 4 2000 30 20 125 35 78
l 5 2000 30 20 127 45 79
700 1.2 1050 35 20 108 4.8 28
l 1150 4 1800 50 20 153 38 108
l 1.5 1050 35 20 110 6 28
l 2 1050 35 20 112 8 28
l 1200 3 2000 50 20 151 31 117
2.5 1050 35 20 112 10 28
l 4 2000 50 30 160 41 127
l 3 1050 35 20 112 12 28
5 2000 50 30 160 51 127
4 1050 35 20 112 16 28

1250 3 2000 50 20 158 34 130

750 1.2 1100 30 20 112 5.2 33
4 2000 50 30 170 45 140
l 1.5 1100 30 20 113 6.5 33 5 2000 50 30 170 56 140
l 2 1100 30 20 113 8.5 33
2.5 1100 30 20 115 11 33 l  1270 1.5 1900 30 30 160 17 135
l 3 1100 30 20 118 13 33 l 2 2500 30 20 125 23 107
4 1100 30 20 118 18 33 l 2.5 2500 30 20 126 28 107
l 3 2500 30 20 126 34 108
790 2 1200 30 35 125 11 43 l 4 2500 30 30 135 46 120
3 1200 30 35 125 16 43 l 5 2500 30 30 135 58 120
4 1200 30 35 125 22 43
l 1300 3 2300 50 30 160 36 148
800 1.2 950 50 20 140 6 45 l 4 2300 50 30 162 48 148
l 1.5 950 50 20 140 7.5 45 l 5 2300 50 30 164 60 148
l 2 950 50 20 140 10 45
l 1350 4 2300 50 20 161 52 155
2.5 950 50 20 143 13 45
l 3 950 50 20 145 15 45
l 1400 3 2500 50 20 159 41 165
l 4 950 50 20 147 20 45
l 4 2500 50 30 170 55 180
5 1400 50 30 130 25 48
5 2500 50 30 170 68 180

850 1.2 1300 40 20 123 6.5 47

 1430 1.5 3000 30 20 135 21,5 140
l 1.5 1300 40 20 123 8 47
l 2 3000 30 20 135 28 140
l 2 1300 40 20 125 10.6 47 l 2.5 3000 30 30 135 35 157
2.5 1300 40 20 125 13.5 47 l 3 3000 30 30 138 43 157
l 3 1300 40 20 127 16 47 l 4 3000 30 30 142 56 157
4 1300 40 20 127 22 47 l 5 3000 30 30 144 71 157

16
• These tables show the most common sizes. • Height, weight and volume are theoretical values
Intermediate sizes or diameters up to 5000 mm and as such are merely indicative and must not be
and thicknesses up to 32 mm can also be made. taken as a basis for the contract.

D s R r h Ht Kg. V D s R r h Ht Kg. V
1480 5 2600 50 30 178 78 210 8 3800 50 40 253 290 661
10 3800 50 50 264 360 702
l  1500 3 2600 50 20 170 48 200
l 4 2600 50 30 180 64 218 l 2300 4 3800 50 30 247 148 653
l 5 2600 50 30 180 80 218 l 5 3800 50 30 248 185 656
l 6 3800 50 30 249 222 660
 1600 1.5 3200 30 20 145 27 190 8 3800 50 40 260 300 704
l 2 3200 30 20 145 35 190 10 3800 50 50 271 380 747
l 2.5 3200 30 20 146 45 191
l 3 3200 30 30 155 54 210 l 2400 4 4000 50 30 253 160 725
l 4 3200 30 30 157 70 210 l 5 4000 50 30 253 200 725
l 5 3200 30 40 170 90 230 6 4000 50 30 253 240 725
6 2800 50 30 188 108 256
l 2450 4 4000 50 30 253 160 725
l 1650 4 2800 50 20 180 76 260 l 5 4000 50 30 253 200 725
5 2800 50 25 180 96 260 6 4000 50 30 253 240 725

l 1700 2.5 3400 30 30 160 50 245 l 2500 4 4200 50 30 260 175 806
l 3 3400 30 30 160 60 245 l 5 4200 50 30 260 215 806
l 4 3400 30 40 170 80 270 l 6 4200 50 30 261 260 810
l 5 3400 30 40 170 100 270 7 4200 50 40 272 303 862
8 4200 50 40 272 350 862
l 1800 3 3000 50 20 200 68 322 10 4200 50 50 284 440 918
l 4 3000 50 20 200 90 322
l 5 3000 50 25 200 113 322 3000 4 5400 50 30 283 252 1246
6 3000 50 30 209 136 352 l 5 5400 50 30 283 315 1246
l 6 5400 50 30 284 378 1251
1840 3 3000 50 30 213 71 372 7 5400 50 40 295 441 1327
l 4 3000 50 30 213 95 372 8 5400 50 40 295 508 1327
5 3000 50 30 214 118 373 10 5400 50 50 302 640 1409
12 5400 50 50 308 760 1414
l 1900 3 3200 50 20 195 75 357 15 5400 50 60 321 970 1501
l 4 3200 50 20 195 100 357 18 5400 50 60 323 1160 1512
l 5 3200 50 25 200 125 357 20 5400 50 60 324 1300 1518
6 3200 50 30 207 150 390
3500 4 6200 100 30 360 347 2232
1950 4 3200 50 30 221 110 430 5 6200 100 30 360 434 2232
6 6200 100 30 361 521 2238
l 2000 3 3400 50 20 200 85 422 8 6200 100 40 373 700 2349
l 4 3400 50 20 205 111 422 10 6200 100 50 384 870 2450
l 5 3400 50 25 215 138 430 12 6200 100 50 386 1050 2465
l 6 3400 50 30 221 167 453 15 6200 100 60 398 1320 2573
18 6200 100 60 400 1575 2587
l 2050 4 3400 50 30 227 117 485 20 6200 100 60 401 1760 2592
5 3400 50 30 228 146 488 24 6200 100 60 404 2130 2614

2100 3 3400 50 30 235 21 523 4000 5 6800 120 30 423 570 3396
4 3400 50 30 235 123 523 6 6800 120 30 424 690 3406
5 3400 50 30 236 154 526 8 6800 120 40 435 925 3539
6 3400 50 30 236 185 526 10 6800 120 50 447 1170 3683
8 3400 50 40 248 250 565 12 6800 120 50 448 1380 3691
15 6800 120 60 460 1730 3832
l 2200 4 3500 50 30 246 135 595
18 6800 120 60 462 2080 3849
l 5 3500 50 30 247 167 598
l 6 3500 50 30 247 204 598
8 3500 50 40 259 270 642 LEGEND:
10 3500 50 50 270 340 681 l Dished heads generally avaiable in stock (sold excepted)
made in carbon steel
l 2250 4 3800 50 30 240 140 612  Dished heads generally avaiable in stock (sold excepted)
l 5 3800 50 30 240 176 612 made in stainless steel.
l 6 3800 50 30 241 211 615 Dished heads highlighted are press-formed

17
Dished head type E
Torispherical heads
R=D r=D/10

D s R r h Ht Kg. V D s R r h Ht Kg. V
 320 1.5 400 30 20 75 1.5 4 l 750 3 750 75 20 166 14 50
 2 400 30 20 75 2 4 l 4 750 75 20 167 18 50
l 3 400 30 20 75 3 4 l 5 750 75 30 172 24 54
l 4 400 30 20 75 4 4 6 750 75 30 178 29 54

350 1.5 350 30 20 83 1.5 6 790 3 790 79 30 180 15 63

 2 350 30 20 85 2 6 l 4 790 79 30 180 20 63
l 3 350 30 20 90 3.5 6
l 4 350 30 20 90 4.5 6 l 800 3 800 80 30 183 16 65
l 4 800 80 30 184 22 65
380 3 400 38 20 89 3.8 7 l 5 800 80 30 185 27 65
4 400 38 20 89 5 7 6 800 80 30 188 32 65

400 1.5 400 35 20 92 2 8 l 850 3 850 85 30 190 18 77

l 2 400 35 20 95 3 8 l 4 850 85 30 192 24 77
l 3 400 35 20 95 4 8 l 5 850 85 30 194 30 77
l 4 400 35 20 97 6 8 6 850 85 30 197 37 77

l 450 2 450 35 20 97 3.5 11 l 900 3 900 90 40 212 20 96

l 3 450 35 20 103 5.5 11
l 4 900 90 40 213 27.5 96
l 4 450 34 20 104 7 11
l 5 900 90 40 213 34 96
6 900 90 40 217 41 96
5 450 35 20 105 9 11

l 950 3 950 95 40 219 23 112

 500 2 500 40 20 112 4.5 15
l 4 950 95 40 219 30 112
l 2.5 500 40 20 112 5.5 15
l 5 950 95 40 222 37 112
l 3 500 40 20 116 6 15
6 950 95 40 227 46 112
l 4 500 40 20 119 9 15
l 5 500 40 20 119 11 15
l  1000 3 1000 100 40 230 25 129
l 4 1000 100 40 230 33 129
508 2 500 50 20 115 4,5 15
l 5 1000 100 40 230 42 129
l 3 500 50 20 115 6 15
6 1000 100 40 236 51 129
l 4 500 50 20 115 9 15

1050 3 1050 105 30 228 25 139

530 1,5 530 53 20 125 4 18
l 4 1050 105 30 229 37 139
2 530 53 20 125 5 18
l 5 1050 105 30 229 46 139
6 1050 105 30 231 56 139
 550 2 550 55 20 127 5.5 21
l 3 550 55 20 128 7.5 21
l  1100 3 1100 110 30 242 30 159
l 4 550 55 20 130 10.5 21 l 4 1100 110 30 242 39 159
l 5 550 55 20 130 13.5 21 l 5 1100 110 30 242 50 159
l 6 1100 110 30 246 61 159
 600 2 600 40 30 135 6 26
l 3 600 40 30 135 9 26 1150 3 1150 115 30 244 32 180
l 4 600 40 30 136 12 26 l 4 1150 115 30 244 44 180
l 5 600 40 30 136 16 26 l 5 1150 115 30 244 55 181
6 600 60 30 149 18 26 6 1150 115 30 244 66 183

l 650 3 650 40 30 138 10.5 32 l  1200 3 1200 120 30 265 36 203

l 4 650 40 30 141 14 32 l 4 1200 120 30 265 48 203
l 5 650 65 30 145 18 32 l 5 1200 120 30 265 58 203
6 650 65 30 159 23 37 l 6 1200 120 30 265 72 203

 700 2 700 50 20 146 8 37 l  1250 3 1250 125 40 280 39 240

l 3 700 50 30 153 12 41 l 4 1250 125 40 280 52 240
l 4 700 50 30 154 16 41 l 5 1250 125 40 280 65 240
l 5 700 50 30 157 20 41 6 1250 125 40 285 74 240
6 700 70 30 168 26 45

18
• These tables show the most common sizes. • Height, weight and volume are theoretical values
Intermediate sizes or diameters up to 5000 mm and as such are merely indicative and must not be
and thicknesses up to 32 mm can also be made. taken as a basis for the contract.

D s R r h Ht Kg. V D s R r h Ht Kg. V
 1300 3 1300 130 40 290 42 267 2300 5 2300 230 40 490 217 1357
l 4 1300 130 40 290 56 267 6 2300 230 40 490 260 1357
l 5 1300 130 40 290 70 267 7 2300 230 50 500 303 1398
l 6 1300 130 40 290 84 267 8 2300 230 50 500 347 1398

l 1350 4 1350 135 40 290 61 286 2400 5 2400 240 40 505 236 1533
l 5 1350 135 40 290 76 286 6 2400 240 40 505 283 1533
6 1350 135 40 290 91 286 7 2400 240 50 520 330 1577
8 2400 240 50 520 377 1577
l  1400 3 1400 140 40 311 48 330 10 2400 240 50 520 480 1577
l 4 1400 140 40 311 65 330
l 5 1400 140 40 311 82 330 2500 5 2500 250 40 525 255 1723
l 6 1400 140 40 311 96 330 6 2500 250 40 540 306 1723
7 2500 250 50 540 357 1771
 1500 3 1500 150 40 330 56 400 8 2500 250 50 540 408 1771
l 4 1500 150 40 330 75 400 10 2500 250 50 540 510 1771
l 5 1500 150 40 330 93 400
12 2500 250 50 540 612 1771
l 6 1500 150 40 330 112 400
8 1500 150 40 334 150 400
3000 5 3000 300 40 620 365 2923
6 3000 300 40 620 438 2923
 1600 3 1600 160 40 350 65 481
7 3000 300 50 635 511 2993
l 4 1600 160 40 350 85 481
8 3000 300 50 635 584 2993
l 5 1600 160 40 350 106 481
10 3000 300 50 635 730 2993
l 6 1600 160 40 350 130 481
12 3000 300 50 635 880 2993
7 1600 160 40 354 150 481
15 3000 300 60 650 1100 3061
8 1600 160 40 354 173 481
18 3000 300 60 650 1320 3061
l 1700
20 3000 300 60 650 1460 3061
5 1700 170 50 379 120 592
l 6 1700 170 50 379 145 592
7 1700 170 50 380 169 592 3500 5 3500 350 40 720 500 4580
8 1700 170 50 380 193 592 6 3500 350 40 720 600 4580
7 3500 350 50 730 700 4675
l 1750 5 1750 175 50 392 124 642 8 3500 350 50 730 800 4675
l 6 1750 175 50 392 148 642 10 3500 350 50 730 1000 4675
7 1750 175 50 392 172 642 12 3500 350 50 730 1206 4675
8 1750 175 50 392 197 642 15 3500 350 60 745 1510 4770
18 3500 350 60 745 1815 4770
l 1800 5 1800 180 40 391 135 672 20 3500 350 60 745 2015 4770
l 6 1800 180 50 396 163 696
7 1800 180 50 398 190 696 4000 5 4000 400 40 815 650 6770
8 1800 180 50 398 217 696 6 4000 400 40 815 780 6770
7 4000 400 50 830 910 6900
l 1900 5 1900 190 50 430 153 826 8 4000 400 50 830 1040 6900
l 6 1900 190 50 430 184 826 10 4000 400 50 830 1306 6900
7 1900 190 50 430 214 826 12 4000 400 50 830 1570 6900
8 1900 190 50 430 244 826 15 4000 400 60 840 1965 7016
18 4000 400 60 840 2360 7016
l 2000 5 2000 200 50 446 170 941 20 4000 400 60 840 2625 7016
l 6 2000 200 50 446 204 941
7 2000 200 50 446 238 941
8 2000 200 50 446 275 941

2100 5 2100 210 40 450 182 1044

6 2100 210 40 450 218 1044
7 2100 210 50 460 255 1078 LEGEND:
8 2100 210 50 460 291 1078
l Dished heads generally avaiable in stock (sold excepted)
made in carbon steel
2200 5 2200 220 40 470 199 1192  Dished heads generally avaiable in stock (sold excepted)
l 6 2200 220 40 470 238 1192 made in stainless steel.
7 2200 220 50 480 278 1230 Dished heads highlighted are press-formed
8 2200 220 50 480 318 1230

19
Dished head type F
Semielliptical heads
R=0,8xD r=D/6,5

D s R r h Ht Kg. V D s R r h Ht Kg. V
400 2 320 60 30 136 3,5 12 950 4 760 145 30 272 34 130
3 320 60 30 136 5 12 5 760 145 30 272 42 130
4 320 60 30 136 6 12 6 760 145 30 272 51 130
8 760 145 30 272 68 130
450 2 360 70 30 150 4 17 10 760 145 40 284 85 136
3 360 70 30 150 6 17 12 760 145 50 295 105 142
4 360 70 30 150 8 17
l 1000 4 800 175 45 313 41 170
500 3 400 76 30 155 7 22 l 5 800 175 45 313 52 170
4 400 76 30 155 10 22 5.5 800 175 45 313 56 170
5 400 76 30 155 12 22 l 6 800 175 45 313 61 170
8 800 175 45 313 78 170
550 3 440 84 30 170 9 28
10 800 153 40 297 95 157
4 440 84 30 170 12 28
12 800 153 50 310 145 163
5 440 84 30 170 15 28
15 800 153 50 310 145 163
18 800 153 50 310 173 163
l 600 3 480 90 30 180 10 35
20 800 153 50 310 200 163
l 4 480 90 30 180 14 35
5 480 90 30 180 17 35
1100 5 880 170 30 312 55 200
l 650 3 520 100 30 196 12 45 6 880 170 30 312 72 200
l 4 520 100 30 196 16 45 8 880 170 30 313 96 200
5 520 100 30 196 20 45 10 880 170 40 324 120 207
6 520 100 30 197 22 45 12 880 170 50 336 150 214
8 520 100 30 198 32 45 15 880 170 50 336 190 214
18 880 170 50 338 230 214
700 3 560 110 30 210 13 55 20 880 170 50 338 260 214
4 560 110 30 210 18 55
5 560 110 30 211 22 55 l 1200 4 900 193 65 390 58 305
6 560 110 30 211 26 55 l 5 900 193 65 390 72 305
8 560 110 30 212 36 55 5.5 900 193 65 390 79 305
l 6 900 193 65 390 88 305
750 3 600 115 30 220 15 67 6,5 900 193 65 390 95 305
4 600 115 30 220 20 67 8 960 184 30 337 105 253
5 600 115 30 220 25 67 10 960 184 40 348 130 263
6 600 115 30 222 30 67 12 960 184 50 360 160 270
8 600 115 30 223 40 67 15 960 184 50 360 200 270
18 960 184 50 360 235 270
790 3 632 120 30 230 18 82 20 960 184 50 360 270 270
4 632 120 30 230 24 82 22 960 184 50 360 290 270
5 632 120 30 230 30 82
1250 4 1000 192 30 365 60 285
l 800 3 640 141 35 250 19 87 5 1000 192 30 365 75 285
l 4 640 141 35 250 26 87 6 1000 192 30 365 90 285
l 5 640 141 35 250 32 87 8 1000 190 30 348 120 285
5.5 640 141 35 250 35 87 10 1000 190 40 360 150 295
l 6 640 141 35 250 39 87 12 1000 190 50 372 190 305
7 640 141 35 250 42 87 15 1000 190 50 372 230 305
7.5 640 141 35 250 45 87 18 1000 190 50 372 280 305
8 640 123 30 237 44 80 20 1000 190 50 375 310 305
10 640 123 30 237 56 80 22 1000 190 50 375 340 305
12 640 123 30 237 66 80
1300 5 1040 200 30 362 78 320
850 3 680 130 30 245 20 95 6 1040 200 30 362 100 320
4 680 130 30 245 27 95 8 1040 200 30 362 132 320
5 680 130 30 245 34 95 10 1040 200 40 374 165 333
6 680 130 30 247 39 95 12 1040 200 50 385 200 342
8 680 130 30 247 52 95 15 1040 200 50 385 250 342
10 680 130 40 259 64 99 18 1040 200 50 385 300 342
12 680 130 50 270 78 104 20 1040 200 50 385 335 343
22 1040 200 50 385 370 343
900 4 720 140 30 261 30 112
5 720 140 30 261 37 112 1400 5 1120 215 30 388 90 397
6 720 140 30 261 45 112 6 1120 215 30 388 115 397
8 720 140 30 261 60 112 8 1120 215 30 388 150 397
10 720 140 40 273 74 117 10 1120 215 40 399 190 410
12 720 140 50 284 90 123 12 1120 215 50 410 230 422

20
• These tables show the most common sizes. • Height, weight and volume are theoretical values
Intermediate sizes or diameters up to 4000 mm and as such are merely indicative and must not be
and thicknesses up to 32 mm can also be made. taken as a basis for the contract.

D s R r h Ht Kg. V D s R r h Ht Kg. V
1400 15 1120 215 50 410 290 422 2100 5 1680 323 40 576 203 1330
18 1120 215 50 410 350 422 6 1680 323 40 576 250 1330
20 1120 215 50 413 390 422 8 1680 323 40 576 340 1330
22 1120 215 50 413 420 422 10 1680 323 50 588 410 1350
12 1680 323 50 588 500 1350
1500 5 1200 230 30 414 103 485 15 1680 323 50 588 620 1350
6 1200 230 30 414 126 485 18 1680 323 50 590 760 1350
8 1200 230 30 414 170 485 20 1680 323 50 590 850 1350
10 1200 230 40 424 210 500 22 1680 323 50 590 920 1350
12 1200 230 50 435 255 515
15 1200 230 50 435 320 515 2200 5 1760 340 40 602 220 1523
6 1760 340 40 602 270 1523
18 1200 230 50 435 390 515
8 1760 340 40 602 360 1523
20 1200 230 50 440 430 515
10 1760 340 50 615 450 1555
22 1200 230 50 440 470 515
12 1760 340 50 615 550 1555
15 1760 340 50 615 680 1555
1600 5 1280 245 30 438 118 585
18 1760 340 50 618 820 1555
6 1280 245 30 438 144 585 20 1760 340 50 618 910 1555
8 1280 245 30 438 192 585 22 1760 340 50 618 1000 1555
10 1280 245 40 450 240 600
12 1280 245 50 462 290 620 2400 5 1920 370 40 652 254 1960
15 1280 245 50 462 370 620 6 1920 370 40 652 305 1960
18 1280 245 50 462 440 620 8 1920 370 40 652 410 1960
20 1280 245 50 464 490 620 10 1920 370 50 665 510 1995
22 1280 245 50 464 540 620 12 1920 370 50 665 620 1995
15 1920 370 50 665 770 1995
1700 5 1360 260 30 463 131 697 18 1920 370 50 668 930 1995
6 1360 260 30 463 160 697 20 1920 370 50 668 1030 1995
8 1360 260 30 463 220 697 22 1920 370 50 668 1140 1995
10 1360 260 40 475 265 716
12 1360 260 50 487 320 735 2500 5 2000 385 40 678 282 2205
15 1360 260 50 487 400 735 6 2000 385 40 678 340 2205
18 1360 260 50 487 510 735 8 2000 385 40 678 455 2205
20 1360 260 50 489 540 735 10 2000 385 50 690 570 2240
22 1360 260 50 489 590 735 12 2000 385 50 690 690 2240
15 2000 385 50 690 860 2240
1800 5 1440 276 40 500 147 850 18 2000 385 50 693 1040 2240
6 1440 276 40 500 180 850 20 2000 385 50 693 1155 2240
22 2000 385 50 693 1270 2240
8 1440 276 40 500 240 850
10 1440 276 50 513 300 870
3000 5 2400 460 50 815 392 3825
12 1440 276 50 513 370 870
6 2400 460 50 815 480 3825
15 1440 276 50 513 460 870
8 2400 460 50 815 640 3825
18 1440 276 50 513 550 870
10 2400 460 50 816 790 3825
20 1440 276 50 515 620 870 12 2400 460 60 826 960 3870
22 1440 276 50 515 680 870 15 2400 460 60 826 1195 3870
18 2400 460 60 830 1440 3870
1900 5 1520 293 40 525 165 995 20 2400 460 60 830 1600 3870
6 1520 293 40 525 200 995 22 2400 460 60 830 1760 3870
8 1520 293 40 525 280 995
10 1520 293 50 537 340 1020 4000 6 3200 615 50 1070 890 8860
12 1520 293 50 537 410 1020 8 3200 615 50 1070 1170 8860
15 1520 293 50 537 520 1020 10 3200 615 50 1070 1461 8860
18 1520 293 50 537 620 1020 12 3200 615 60 1083 1760 8950
20 1520 293 50 540 700 1020 15 3200 615 60 1083 2200 8950
22 1520 293 50 540 760 1020 18 3200 615 60 1083 2650 8950
20 3200 615 60 1083 2940 8950
2000 5 1600 310 40 551 188 1155 22 3200 615 60 1083 3240 8950
6 1600 310 40 551 230 1155 24 3200 615 60 1083 3530 8950
8 1600 310 40 551 305 1155
10 1600 310 50 564 380 1180
12 1600 310 50 564 460 1180
LEGEND:
15 1600 310 50 564 580 1180
18 1600 310 50 564 690 1180 l Dished heads generally avaiable in stock (sold excepted)
20 1600 310 50 568 780 1180 made in carbon steel
22 1600 310 50 568 850 1180 Dished heads highlighted are press-formed

21
Dished head type DE
Medium radius heads
R=D r=50÷180

D s R r h Ht Kg. V
950 3 950 50 30 190 24 88
4 950 50 30 190 32 88
5 950 50 30 190 40 88

1250 3 1250 50 30 230 40 178

4 1250 50 30 230 52 178
5 1250 50 30 230 65 178

1500 4 1500 50 30 260 73 290

5 1500 50 30 260 90 290

1900 5 1900 70 30 330 142 570

6 1900 70 30 330 170 570

2500 6 2500 95 30 423 290 1260

3000 6 3000 180 30 540 420 2390

Double walled
tanks heads

D s R r h Ht Kg. V
1258 3 1250 50 30 230 40 180

1508 3 1500 50 30 265 55 290

1908 3 1900 70 30 330 85 580

2512 5 2500 95 30 425 240 1280

3012 5 3000 180 30 545 350 2420

22
Pressed Type B heads

D s r h D s r h
320 1,5 ÷ 4 30 700 1,5 ÷ 4 20
50

according to request of the customer

height of the straight flange according to

350 1,5 ÷ 3 30
750 1,5 ÷ 3 50

height of the straight flange

400 1,5 ÷ 3 20
request of the customer

4 30 800 1,5 ÷ 4 30
50
450 1,5 ÷ 4 20
850 2,5 ÷ 5 50
500 1,5 ÷ 4 20
900 1,5 ÷ 3 10
550 1,5 ÷ 4 20 30

600 1,5 ÷ 4 20 950 1,5 ÷ 3 30

650 1,5 ÷ 3 10 1000 1,5 ÷ 3 30

30
50
The indications for the height of the straight flange (h)
and the total height (Ht) can be customised and have to
be communicated by raising a request.

Oblong head
Standard 700x1500x2

D = 1500
d = 700
C = 350
C1 = 800
perimeter = 3800
area m² = 0,945
thickness = 2÷3,3 mm
H = 30÷60 (on request)

23
Edge bevelling types

TF1 TF2

TF3 TF4

• The heads avaiable in stock are formed • The edge TF2 is shown in its standard
with flat edge (TF1), for heads with a different version, but it can also be made to satisfy
edge, you kindly would specify to our different exigences
customer office. • Our technical department is available
• The above drawings are not to scale and to contemplate also other types of edge
should be taken purely as an example. bevelling or edge trimming according to
drawings and needs of the customer.

24
25
Where we are
Via Case Nuove, 1/3
25050 RODENGO SAIANO (BS) - ITALY
tel. +39 030 610161 - fax +39 030 610163
info@tecnofondi.it - www.tecnofondi.it
Vers. 20.2017.C.1.5
Direction: ProgramGroup.it Design:

Via Case Nuove, 1/3

25050 RODENGO SAIANO (BS) - ITALY
tel. +39 030 610161 - fax +39 030 610163
info@tecnofondi.it - www.tecnofondi.it