Waterproofing

PRODUCT CODE 1048

SmartCare Damp Proof

Asian Paints SmartCare Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is
formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms
a thick, seamless, durable membrane thus offering ultimate waterproofing.

PRODUCT BENEFITS
Water proofing High sheen
Waterproofing protection of up to7 bars hydrostatic High sheen, brilliant white colour and thick coat results WATER BASED

pressure. in high levels of heat reflectance.

Crack bridging Anti carbonation
Unmatched crack bridging ability due to elastomeric Reduces carbon dioxide and chloride ion diffusion thus
properties. protecting re-bars against corrosion.
Mechanical strenth Use & maintenance * All Asian Paints products contain no added

Reinforced with glass fibers for superior abrasion Single pack, easy to apply and simple re-coating. Lead, Mercury, Arsenic or Chromium
from April 2008.

resistance.
Adhesion
Strong adhesion to masonry substrates.

PRODUCT FEATURES
AVAILABLE PACKS COLOURS AVAILABLE COVERAGE

White On RCC or plaster using brush or roller

Recommended 1 COAT
System 20 - 25 sq.ft/ltr
4 ltr 20 ltr
10 sq.ft/ltr on vertical walls
on terraces
Shelf life: 3 years from date of manufacture in original tightly
closed containers away from direct sunlight and excessive
heat.

DRYING TIME TO TOUCH RECOMMENDED USAGE

4-6
0

45 15

30
HOURS
Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS,
sound brick-bat coba or cementatious waterproofing.

HOW TO APPLY
PRE PAINTING STEPS APPLICATION PROCESS
PLASTER New masonary
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
surfaces must be allowed VISCOSITY1 PERIOD
to cure completely. It is HORIZONTAL SURFACE
recommended to allow 28 STEP 1
days as the curing time for new SELF PRIMING
1048 WATER 33% N/A 4 - 6 HRS
masonary surfaces. SMARTCARE DAMP PROOF
BRUSH
STEP 2
CLEANING Surface should be FIRST COAT WATERPROOFING
1048 N/A N/A N/A 4 - 6 HRS
free from any loose paint, dust SMARTCARE DAMP PROOF
or grease. Remove all existing BRUSH / ROLLER
bitumen coatings completely. It STEP 3
SECOND COAT WATERPROOFING
is recommended to use intense SMARTCARE DAMP PROOF
1048 N/A N/A N/A 4 - 6 HRS
wire brushing or high speed BRUSH / ROLLER
water jet for thorough cleaning.
VERTICAL SURFACE
REPAIRING The substrate must STEP 1
SELF PRIMING
be checked for its soundness SMARTCARE DAMP PROOF
1048 WATER 33% N/A 4 - 6 HRS
using small hammer. All cracks BRUSH
at corner joints, channels and STEP 2
parapets should be properly FIRST COAT WATERPROOFING
1048 N/A N/A N/A 4 - 6 HRS
treated. SMARTCARE DAMP PROOF
BRUSH / ROLLER
STEP 3
FILLING FOR CRACKS For FIRST COAT
1048 WATER 40% N/A 4 - 6 HRS
filling cracks upto 3mm use APEX / ULTIMA
BRUSH / ROLLER
Asian Paints Crack Seal. Bigger
STEP 4
cracks, damaged portions and SECOND COAT
hollow areas must be repaired 1048 WATER 40% N/A 4 - 6 HRS
APEX / ULTIMA
with polymer modified cement BRUSH / ROLLER
mortars.
1. As measured through a Ford cup.
2. Apply an additional coat of Damp Proof in case of severe dampness.
3. For best results, strictly follow the dilution and forced coverage requirements.
Waterproofing

ADDITIONAL INFORMATION

POST PAINTING CARE PRECAUTIONS

For the best performance of the paint, ensure > Do not apply during rains or extreme temperatures.
proper washing and cleaning of all algal and > Avoid abuses which may lead to puncturing of membrane.
fungal growth, if any, at regular intervals of > Ensure that the product is applied at least 6 inches inside the drain pipe.
six months.
> For best results, apply parapet to parapet to envelope the entire building.

TECHNICAL DETAILS

a. Form: Ready to use viscous liquid

SAFETY FEATURES
b. Mix Density: 1.26
> Kindly refer to the MSDS for Asian Paints SmartCare Damp Proof which gives detailed
c. Application temperature: 5ºC to 35ºC
information on safety measures while handling the paint, which is available on request.
> Store the container with the lid tightly closed in an upright position, in a cool, dry place
> Keep out of reach of children and away from eatables.
> May be harmful if swallowed. In case of ingestion seek immediate medical attention.
> Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
> In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
> Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
and surface preparation to avoid dust inhalation
> Do not pour leftover paint down the drain or in water courses.
> In the event of spills, contain spillage using sand or earth.
> No added Lead, Mercury or Chromium compounds.

Version No. VN01/01/2014

Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India