Asian Paint

Under Coats
PRODUCT CODE 5440
Professional Wall Putty

Asian Paints Professional Wall Putty is a white cement based product with redispersible polymer and
functional additives for application on interior and exterior rough plasters to give a smooth finish.
PRODUCT BENEFITS
Asian Paints Professional Wall Putty has the following e) Good Tensile Adhesion Strength, Compressive
product benefits: Strength and Flexural Strength
a) Provides smooth and uniform finish to f) Controlled water vapour permeability
rough plasters g) Excellent abrasion resistance
b) Good Workability h) Resists growth of algae and fungi on wall
c) Does not require curing with water i) Good intercoat adhesion to emulsion paints * All Asian Paints products contain no added
Lead, Mercury, Arsenic or Chromium
from April 2008.
d) Good water resistance
PRODUCT FEATURES
AVAILABLE PACKS COLOURS AVAILABLE COVERAGE
White* On rough masonry surface by putty knife
2 COATS
10 - 15 sq.ft/kg
for upto 1.5 mm
thickness in 2 coats
40 kg
Shelf Life: 1 year from date of manufacture in original tightly *Please note: Professional Wall Putty is an **Actual coverage may vary from the quoted coverage due
sealed sacks away from direct sunlight and excessive heat undercoat to factors such as method and condition of application and
surface roughness.
DRYING TIME TO RECOAT RECOMMENDED USAGE
6-8
0
45 15
30
HOURS
It can be used on all types of exterior cement plasters/ interior walls, concrete etc
HOW TO APPLY
PRE PAINTING STEPS APPLICATION PROCESS
PLASTER New masonry surfaces APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
must be allowed to cure VISCOSITY1 PERIOD
completely for best results. It is STEP 1
recommended to allow 28 days SANDING
as curing time for new masonry SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
surfaces.
STEP 2
CLEANING Ensure that surface PRE WET THE
is completely free from all dirt, SURFACE PRE WET THE SURFACE BEFORE APPLICATION OF 1ST COAT OF PROFESSIONAL WALL PUTTY
loosely held plaster, powdery
residue, oil, grease or any other
contamination. Any previous STEP 3
growth of fungus, algae or moss FIRST COAT
needs to be removed thoroughly PROFESSIONAL WALL PUTTY
KNIFE / TROWEL 5440 WATER 40% - 50% N/A 6 - 8 HRS
by vigorous wire brushing
and cleaning with water. One
coat of SmartCare BioBlock is
recommended to prevent further STEP 4
SECOND COAT
growth of algae, fungus or moss.
PROFESSIONAL WALL PUTTY
KNIFE / TROWEL 5440 WATER 40% - 50% N/A 6 - 8 HRS
FILLING FOR CRACKS For filling
cracks upto 3mm use Asian Paints
Smart Care Crack Seal. STEP 5
PRIMER AND
EMULSION COAT APPLY A COAT OF PRIMER FOLLOWED BY 2 - 3 COATS OF EMULSION
FILLING FOR HOLES & DENTS
In case of dents and holes use a
mixture of white cement and fine
sand in the ratio 1:3.
PRE WETTING Pre wet the surface 1. As measured through a Ford cup.
2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
with water before application of
1st coat of Professional Wall Putty.
Under Coats
ADDITIONAL INFORMATION
POST PAINTING CARE PRECAUTIONS
It is important to apply a coat of Exterior > Do not apply the material without pre - wetting the surface for the 1st coat
Wall Primer or SmartCare Primero over > Ensure the material is mixed homogeneously with water and allowed to stand for 5-10 mins
Professional Wall Putty before application of before application
emulsion. > Do not sand the material vigorously with Sand Paper otherwise it will reduce the strength of
the material
> Do not apply the material to fill cracks
TECHNICAL DETAILS > Though the material is non-toxic, care should be taken to avoid dust inhalation while mixing
and handling
a. Drying time: Surface dry time 1 hour
b. Sheen levels: NA
c. Flash point IS101/1987 Part 1, Sec 6: NA SAFETY FEATURES
d. Stability of thinned paint: To be used
within 4
5 minutes > Kindly refer to the MSDS for Asian Paints Professional Wall Putty which gives detailed
information on safety measures while handling the paint, which is available on request.
> Store the container with the lid tightly closed in an upright position, in a cool, dry place.
> Keep out of reach of children and away from eatables.
> May be harmful if swallowed. In case of ingestion seek immediate medical attention.
> Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
> In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
> It is recommended to wear suitable nose pad during sanding and surface preparation to avoid
dust inhalation
> Do not pour leftover paint down the drain or in water courses.
> In the event of spills, contain spillage using sand or earth.
> No added Lead, Mercury or Chromium compounds.
Version No. VN01/01/2014
Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
Under Coats
PRODUCT CODE 1354
Acrylic Wall Putty

Asian Paints Acrylic Wall Putty is a water based putty. It is one of the best products of it’s
kind available in the market, provides a very strong, durable foundation and brings out the
best performance from the finish paints, both in looks and in durability.
PRODUCT BENEFITS
Asian Paints Acrylic Wall Putty is a water based, ready-to-use putty c) On account of the putty’s exceptional whiteness and
WATER BASED
meant for filling and smoothenening out cracks and dents on the smoothness, emulsions painted over the putty will tend to look
plastered wall or similar interior surfaces. richers
a) The putty has special acrylic binders that ensure that it retains a d) It also enhances breathability and lesser porosity compared to
strong grip on the wall surface, thereby increasing the life of thw conventional putty, thus improving paint performance further
paint film. e) It is quick drying, thus ensuring faster completion of jobs
b) It is made using special equipment and technology that ensure f) It has better alkali resistance, thus making it more suitable for * All Asian Paints products contain no added
smoothness and consistency new walls

from April 2008.
PRODUCT FEATURES
White* On primed masonry surface by putty knife
1 COAT 2 COAT
38 - 44 24 - 35
1 kg 5 kg 10 kg 20 kg 35 kg sq.ft/kg sq.ft/kg
Shelf life: 3 years from date of manufacture in original tightly Please note: Acrylic Wall Putty is an
closed containers away from direct sunlight and excessive undercoat
heat.
DRYING TIME TO TOUCH RECOMMENDED USAGE
20
0
45 15
30
MINS
Can be used for priming plastered walls, asbestos, brick work, concrete, etc
HOW TO APPLY
PLASTER New masonary APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING

surfaces must be allowed to cure VISCOSITY1 PERIOD
completely. It is recommended to STEP 1
allow 28 days as the curing time SANDING
for new masonary surfaces.
SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
CLEANING Surface should
be free from any loose paint,
dust or grease. Growths of
fungus, algae or moss should be
removed by wire brushing and STEP 2
water. In case of areas having ACRYLIC WALL PUTTY
FIRST COAT
excessive dampness use Asian PUTTY KNIFE
Paints SmartCare Damp Block
WATER
to limit further dampness. When 1354 - PASTE 4 - 6 HRS
IF REQUIRED
the underlying surface exhibits
chalkiness, in spite of thorough
surface cleaning, use Asian Paints
SmartCare Exterior Sealer.
STEP 3
FILLING FOR CRACKS For filling
ACRYLIC WALL PUTTY
cracks upto 3mm use Asian Paints SECOND COAT
SmartCare Crack Seal. PUTTY KNIFE
WATER
1354 - PASTE 4 - 6 HRS
FILLING FOR HOLES & DENTS IF REQUIRED
In case of dents and holes use
Asian Paints Acrylic Wall Putty
or white cement and fine sand in
the ratio 1:3
1. As measured through a Ford cup.
Under Coats
For the best performance of the paint, ensure > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
proper washing and cleaning of all algal and this level within 4 hrs of application.
fungal growth, if any, at regular intervals of > Do not over-thin or over-extend the brush.
six months. > Tint using Asian Paints machine colourants only
> Stir well and strain before use.
TECHNICAL DETAILS > Tinted paints need thorough shaking immediately after tinter addition as well as before use.
a. Drying time: Surface dry time 30 min

b. Sheen levels: 15-35 at 35 deg GH
c. Flash point IS101/1987 Part 1, Sec 6: NA SAFETY FEATURES
within 2
4 hours > Kindly refer to the MSDS for Asian Paints Acrylic Wall Putty which gives detailed information
on safety measures while handling the paint, which is available on request.
> Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
and surface preparation to avoid dust inhalation
Under Coats
PRODUCT CODE 6715
SmartCare Waterproof Wall Putty

SmartCare WaterProof Wall Putty is a specially designed white cement based premium quality
putty with unique properties and silicone additives. It can be used on interior as well as exterior concrete/mortar
surfaces to provide a smooth aesthetic finish as well as an extended life of top coats.
PRODUCT BENEFITS
Superior Water Resistance Provides smooth and uniform finish to rough

plasters
Good Workability
Anti-Efflorescent Properties * All Asian Paints products contain no added
Does not require curing with water Lead, Mercury, Arsenic or Chromium
from April 2008.
Vibrant White Finish Good Tensile Adhesion Strength,Compressive

Strength and Flexural Strength
Provides the best in class whiteness compared Good intercoat adhesion to emulsion paints
to normal white cement based putties
PRODUCT FEATURES
White* On rough masonry surface by putty knife
2 COATS
1 - 1.5 sq.m/kg
1 kg 20 kg 40 kg
for upto 1.5 mm
thickness in 2 coats
Shelf Life: 1 year from date of manufacture in original tightly *Please note: SmartCare Waterproof Wall Putty
sealed sacks away from direct sunlight and excessive heat is an undercoat
6-8
0
45 15
30
HOURS
It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc
For Feedback/complaints, write to Marketing Manager Service Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
Under Coats
HOW TO APPLY
PLASTER New masonry surfaces APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
must be allowed to cure VISCOSITY1 PERIOD
completely for best results. It is STEP 1
recommended to allow 28 days SANDING
as curing time for new masonry SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
surfaces.
CLEANING Ensure that surface STEP 2

is completely free from all dirt, PRE WET THE PRE WET THE SURFACE BEFORE APPLICATION
SURFACE
loosely held plaster, powdery OF 1ST COAT OF WATERPROOF WALL PUTTY
contamination. Any previous
growth of fungus, algae or moss STEP 3
FIRST COAT
needs to be removed thoroughly WATERPROOF WALL PUTTY
by vigorous wire brushing KNIFE / TROWEL 6715 WATER 40% - 50% N/A 6 - 8 HRS
and cleaning with water. One
coat of SmartCare BioBlock is
recommended to prevent further STEP 4
growth of algae, fungus or moss. SECOND COAT
WATERPROOF WALL PUTTY
6715 WATER 40% - 50% N/A 6 - 8 HRS
FILLING FOR CRACKS For filling KNIFE / TROWEL
Smart Care Crack Seal.
STEP 5
FILLING FOR HOLES & DENTS PRIMER AND
In case of dents and holes use a EMULSION COAT APPLY A COAT OF PRIMER FOLLOWED BY 2 - 3 COATS OF EMULSION
mixture of white cement and fine
sand in the ratio 1:3
PRE WETTING Pre wet the surface
with water before application of 1st
coat of Putty. Also, it is recommended 1. As measured through a Ford cup.
to pre wet the surface before the
application of the 2nd coat of putty.
It is important to apply a coat of Asian Paints Do not apply the material without pre - wetting the surface for the 1st coat
Primer over Waterproof Wall Putty before Preferably use a Putty mixer for effective and quick mixing with water
application of emulsion
Pre wet the surface before application of the 2nd coat of putty
Ensure the material is mixed homogeneously with water and allowed to stand for 5-10 mins
before application
TECHNICAL DETAILS Do not sand the material vigorously with Emery Paper otherwise it will reduce the strength of
the material
a. Drying time: Surface dry time 30 min Do not apply the material to fill cracks
b. Sheen levels: NA Though the material is non-toxic, care should be taken to avoid dust inhalation while mixing
c. Flash point IS101/1987 Part 1, Sec 6: NA and handling
within 45 minutes SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Asian Paints SmartCare Waterproof Wall Putty which
gives detailed information on safety measures while handling the paint.
Keep out of reach of children and away from food, drink

May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with
In case of skin contact immediately wash skin with soap and plenty of water. Get medical
It is recommended to wear suitable nose pad during sanding and surface preparation to avoid
dust inhalation
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
Safety Data Sheet available on request.

No added Lead, Mercury or Chromium compounds
For Feedback/complaints, write to Marketing Manager Service Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
Under Coats
PRODUCT CODE 0086
Professional Primer (Water Thinnable)

Asian Paints Professional Primer (Water Thinnable) is a water-based wall primer that can be used on interior
masonary surfaces.
PRODUCT BENEFITS
Asian Paints Professional Primer (WT) is a water- c) Good sealing properties which ensure a smooth
based undercoat and has the following product deposition of the paint film WATER BASED
benefits: d) Environment friendly, contains no added lead,

a) A good adhesion for the entire paint system cadmium, mercury or arsenic
thereby increasing the life of the system
b) Good whiteness, coverage and flow and levelling * All Asian Paints products contain no added
properties Lead, Mercury, Arsenic or Chromium

from April 2008.
PRODUCT FEATURES
White On smooth masonry surface by brushing
1 COAT
215 - 270
sq.ft/ltr**
20 ltr 50 ltr
Shelf life: 3 years from date of manufacture in original tightly Please note: Asian Paints Professional Primer **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive (WT) is an undercoat to factors such as method and condition of application and
heat. surface roughness and porosity.
4-8
0
45 15
30 HOURS
It can be used for priming plastered walls, asbestos, cement, concrete, etc.
HOW TO APPLY

surfaces must be allowed VISCOSITY1 PERIOD
to cure completely. It is
recommended to allow 28
STEP 1
days as the curing time for new SANDING
masonary surfaces. SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
CLEANING Ensure that surface STEP 2

is completely free from all dirt, PROFESSIONAL PRIMER (WT)
FIRST COAT 0086 WATER 100% BRUSH 20 - 22 4 - 6 HRS
loosely held plaster, powdery
BRUSH
contamination. Any previous
growth of fungus, algae or STEP 3
SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
moss needs to be removed
thoroughly by vigorous wire
brushing and cleaning with STEP 4
water. One coat of Asian ACRYLIC WALL PUTTY
BASED ON
Paints SmartCare BioBlock PUTTY KNIFE 1354 WATER N/A 4 - 6 HRS
REQUIREMENT
is recommended to prevent
further growth of algae, fungus
STEP 5
or moss.
SANDING
FILLING FOR CRACKS For
filling cracks upto 3mm use STEP 6
Asian Paints Smart Care Crack PROFESSIONAL PRIMER (WT)
SECOND COAT 0086 WATER 100% BRUSH 20 - 22 4 - 6 HRS
Seal.
BRUSH

In case of dents and holes 1. As measured through a Ford cup.
use Asian Wall Putty or white 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
cement and fine sand in the
ratio 1:3
Under Coats
VOC CONTENT PRECAUTIONS
> Store the product at ambient conditions in well ventilated locations and away from source of
ignition and fire.
> Avoid eye and skin contact. In case of eye and skin contact wash with plenty of clean water.
> Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention if
symptoms persist in the both the cases.
Asian Paints Professional Primer (Water Thinnable) meets
LEED VOC criteria as per Indian Green Building Council
> Use protective equipments like rubber or polythene gloves, safety goggles or glasses, face
Version 1 (Tested at Shriram Institute of Industrial Research) mask while handling the paint.
TECHNICAL DETAILS SAFETY FEATURES
a. Drying time: Surface dry time 30 min > Kindly refer to the MSDS for Asian Paints Professional Primer (WT) which gives detailed
b. Sheen levels: Matt information on safety measures while handling the paint, which is available on request.
c. Flash point IS101/1987 Part 1, Sec 6: NA > Store the container with the lid tightly closed in an upright position, in a cool, dry place
Metal Primers
PRODUCT CODE 1087
SmartCare High Performance Yellow Metal Primer

Asian Paints SmartCare High Performance Yellow Metal Primer provides excellent rust protection to metal
surfaces keeping them corrosion free and beautiful for longer time.
PRODUCT BENEFITS
Protection Performance
High protection against rust - 20 times Zinc Phosphate based. Doesn’t contain
stronger than ordinary metal primer. This hazardous material of chrome. Excellent SOLVENT BASED
product to be top coated with products like adhesion of paint film to the metal surface
Apcolite Premium Gloss Enamel or Apcolite
Premium Satin Enamel.
* All Asian Paints products contain no added
from April 2008.
PRODUCT FEATURES
AVAILABLE PACKS COVERAGE
1 COAT 2 COATS*
180 - 200 90 - 110
1 kg
500 ml
4 kg
1 ltr
20 kg
4 ltr 20 ltr sq.ft sq.ft
Shelf life: 1 year from date of manufacture in original tightly closed containers *Always apply two coats of this primer for the desired performance.
away from direct sunlight and excessive heat.
HOW TO APPLY
PAINT APPLICATION PROCESS

APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
VISCOSITY* PERIOD
STEP 1
RUST REMOVAL
REMOVE EXISTING RUST IF ANY BY CHIPPING OR SCRAPING.
STEP 2
SANDING
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
STEP 3
ASIAN PAINTS SMARTCARE HIGH
PERFROMANCE YELLOW METAL BRUSH 6 - 8 BRUSH 55 - 60
1087 MTO** 8 HRS
PRIMER* SPRAY 8 -10 SPRAY 20 - 25
STEP 4
SANDING
SAND THE SURFACE WITH EMERY PAPER 320 OR 400 AND
STEP 5
KNIFING PASTE FILLER
0016 MTO BASED ON BASED ON
6 - 8 HRS
REQUIREMENT REQUIREMENT
STEP 6
SANDING
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
STEP 7
ASIAN PAINTS SMARTCARE HIGH
PERFORMANCE YELLOW METAL 1087 MTO BRUSH 6 - 8 BRUSH 55 - 60
SPRAY 20 - 25
8 HRS
PRIMER SPRAY 8 -10
* As measured in a Ford cup B4.

** Mineral Turpentine oil
Re-coat times are quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
Metal Primers
proper cleaning of all dust, oil and external this level within 4 hours of application
particles, if any, at regular intervals of six > Do not over-thin or over-extend the brush.
months. > Stir well and strain before use.
TECHNICAL DETAILS SAFETY FEATURES
a. Sheen levels: N/A > Kindly refer to the MSDS for SmartCare High Performance Yellow Metal Primer which gives
b. Flash point IS101/1987 Part 1 Sec 6: detailed information on safety measures while handling the paint.
Less than 35 Deg C (95 Deg F) > Store the product at ambient conditions in well ventilated locations and away from the source
of ignition and fire.
c. Stability of paint: To be used within 24
hours > Do not apply when ambient temperature is less than 10 deg C or if the temperature might
drop to this level within 4 hours of this application.
> Avoid eye and skin contact. In case of eye and skin contact, wash with plenty of clean water.
> Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention if
the systems persists in both the cases.
> Use protective equipment like rubber / polyethylene gloves, safety goggles / glasses, face
mask while handling the paint.
For Feedback/complaints, write to Marketing Manager Services,Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
Finishes for Interior Walls
PRODUCT CODE 1031
Apcolite Suprema Premium Interior Emulsion

Asian Paints Apcolite Suprema Premium Interior Emulsion provides an eco-friendly rich matt
acrylic finish.
PRODUCT BENEFITS
It is a truly Green product Superior Hiding
VOC conforms to the internationally accepted Best in class hiding.
GS-11 (Green Seal) standards and is LEED compliant.
Finish WATER BASED
It is developed exclusively for project sales.
It has a rich matt finish.
Best in class whiteness
Anti-Fungal
It delivers more whiteness in comparison to other
Anti-fungal additives prevents growth of fungus.
products in the category making the walls look fresher
and cleaner. * All Asian Paints products contain no added
from April 2008.
PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE
600+*
BEST IN CLASS
On normal masonry surface after brushing
HIGH
MEDIUM
*Currently available in more than 1 COAT
600 shades as per the Asian Paints
LOW
Colour Spectra.
200 - 280
sq.ft/ltr**
AVAILABLE PACKS FINISH

2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS 120 - 140
sq.ft/ltr**
SMOOTH
20 ltr
Shelf life: 3 years from date of manufacture in original tightly Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive to factors such as method and condition of application and
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS

VISCOSITY1 PERIOD
surfaces must be allowed to cure
completely. It is recommended STEP 1
SANDING
to allow 28 days as the curing SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
time for new masonary surfaces.
STEP 2
CLEANING Surface should BRUSH 8 - 10 BRUSH 30 - 40
TRUCARE INTERIOR WALL
be free from any loose paint, PRIMER (ST)/ TRUCARE INTERIOR 0359 MTO* SPRAY 15 - 20 SPRAY 20 - 25 6 - 8 HRS
dust or grease. Growths of WALL PRIMER (WT)
BRUSH / SPRAY / ROLLER 0360 WATER 80% – 100 % BRUSH 30 - 40 4 - 6 HRS
fungus, algae or moss should be SPRAY 20 - 25
removed by wire brushing and
water. In case of areas having STEP 3
TRUCARE ACRYLIC WALL PUTTY BASED ON
excessive dampness use Asian 1354 WATER N/A 4 - 6 HRS
PUTTY KNIFE REQUIREMENT
Paints SmartCare Damp Block
to limit further dampness. When STEP 4
the underlying surface exhibits SANDING
chalkiness, in spite of thorough
surface cleaning, use Asian STEP 5
Paints Exterior Sealer (X1). TRUCARE INTERIOR WALL BRUSH 8 - 10 BRUSH 30 - 40
PRIMER (ST)/ TRUCARE INTERIOR 0359 MTO* SPRAY 15 - 20 SPRAY 20 - 25 6 - 8 HRS
FILLING FOR CRACKS For WALL PRIMER (WT)
filling cracks upto 3mm use 0360 WATER 80% – 100 % BRUSH 30 - 40 4 - 6 HRS
BRUSH / SPRAY
SPRAY 20 - 25
Asian Paints SmartCare Crack
Seal. STEP 6
SANDING
FILLING FOR HOLES & DENTS SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
For dents and holes upto 6mm,
use Asian Paints TruCare Super STEP 7
Putty to level the surface. FIRST COAT APCOLITE SUPREMA BRUSH 55 - 60 BRUSH 30 - 40
PREMIUM INTERIOR EMULSION 1031 WATER 4 - 6 HRS
SPRAY 60 - 65 SPRAY 20 - 25
Apcolite Suprema Premium OPTIONAL
Interior Emulsion should STEP 8
SECOND COAT BRUSH 55 - 60 BRUSH 30 - 40
not be applied on surfaces / APCOLITE SUPREMA PREMIUM
1031 WATER
SPRAY 60 - 65 SPRAY 20 - 25
4 - 6 HRS
substrates that are subjected INTERIOR EMULSION
to continuous seepage or BRUSH / SPRAY
1. As measured through a Ford cup. 2. Recoat period is quoted for 30°C and 60 - 65% Relative Humidity, these may
dampness. vary under different conditions. * Mineral Turpentine Oil
HOW TO CHOOSE COLOURS

Browse through Asian Paints colour tools to help you find the right colour combination
COLOUR SPECTRA FAN DECK* INTERIOR COLOUR COMBINATIONS GUIDE
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
> Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
this level within 4 hours of application.
> Do not over-thin or over-extend the brush.
> Tint using Asian Paints machine colourants only
Asian Paints Apcolite Suprema Premium Interior Emulsion
meets LEED VOC criteria as per Indian Green Building
> Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Council Version 1 (Tested at Shriram Institute of Industrial
Research)
POST PAINTING CARE SAFETY FEATURES
For best performance ensure dry dust > Kindly refer to the MSDS for Asian Paints Apcolite Suprema Premium Interior Emulsion which gives
cleaning at regular intervals. Allow drying detailed information on safety measures while handling the paint, which is available on request.
time of 3 weeks for proper film formation > Store the container with the lid tightly closed in an upright position, in a cool, dry place.
before any sponge cleaning with mild soap > Keep out of reach of children and away from eatables.
solution. > May be harmful if swallowed. In case of ingestion seek immediate medical attention.
TECHNICAL DETAILS > In case of skin contact immediately wash skin with soap and plenty of water. Get medical
> Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding
a. Drying time: Surface dry time 30 minutes
Recoatability - 4 hours
b. Sheen levels: 2 - 5 at 60 º GH
c. Flash point IS101/1987 Part 1, Sec 6: NA,
non-flammable
within 2
4 hours
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India.
PRODUCT CODE 0055
Tractor Uno Acrylic Distemper

Asian Paints Tractor Uno is a water based, interior wall paint. It is a value for money product that makes it
possible for consumers to have beautiful walls at affordable prices.
PRODUCT BENEFITS
Finish Colour
Asian Paints Tractor Uno Acrylic Distemper offers a It is available in a wide range of shades. Thus you can WATER BASED
smooth, matt finish. Your walls look like new for a longer choose your favourite colours for your walls.
time as the shades retain their brightness.
Washability
You can clean your stains with a wet cloth.
from April 2008.
PRODUCT FEATURES
950+*
BEST IN CLASS
On smooth primed masonry surface
HIGH
MEDIUM
LOW
*Asian Paints Tractor Uno is available in
more than 950 shades and Brilliant White
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS
85 - 100 s q.ft/kg**
MATT
1 kg 2 kg 5 kg 10 kg 20 kg
Shelf life: 2 years from date of manufacture in original tightly **Actual coverage may vary from the quoted coverage due
HOW TO APPLY

PLASTER New masonary surfaces VISCOSITY1 PERIOD
must be allowed to cure completely.
It is recommended to allow 28 days STEP 1
as the curing time for new masonary
surfaces. STEP 2
DECOPRIME CEMENT BRUSH / ROLLER 8 - 10 BRUSH / ROLLER 30 - 40
CLEANING Surface should be PRIMER (ST) / 0359 MTO*
SPRAY 15 - 20
SPRAY 20 - 25 6 - 8 HRS
free from any loose paint, dust or DECOPRIME CEMENT
BRUSH / ROLLER 30 - 40
PRIMER (WT) 0360 WATER 4 - 6 HRS
grease. Growths of fungus, algae 80% – 100 % SPRAY 20 - 25
BRUSH / ROLLER / SPRAY
or moss should be removed by wire
brushing and water. In case of areas STEP 3
having excessive dampness use ACRYLIC WALL SMALL AMOUNTS
PUTTY 1354 WATER TO IMPROVE N/A 4 - 6 HRS
Asian Paints SmartCare Damp Block PUTTY KNIFE FLOWABILITY
to limit further dampness.
STEP 4
FILLING FOR CRACKS For filling SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
SmartCare Crack Seal. STEP 2
PRIMER (ST) / 0359 MTO* SPRAY 20 - 25 6 - 8 HRS
FILLING FOR HOLES & DENTS SPRAY 15 - 20
DECOPRIME CEMENT
In case of dents and holes use 0360 WATER BRUSH / ROLLER 30 - 40 4 - 6 HRS
PRIMER (WT) 80% – 100 % SPRAY 20 - 25
Asian Paints Acrylic Wall Putty or BRUSH / ROLLER / SPRAY
white cement and fine sand in the STEP 6
ratio 1:3 SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
For interior surfaces or substrates STEP 7
that are subjected to continuous TRACTOR UNO
ACRYLIC DISTEMPER 0055 WATER BRUSH 65 - 75 BRUSH 20 - 25 3 - 4 HRS
seepage or dampness, kindly
BRUSH
use Asian Paints SmartCare
Damp Block before the top coat STEP 8
application. TRACTOR UNO
BRUSH

* Mineral Turpentine Oil

COLOUR SPECTRA FAN DECK TRACTOR WALL FINISHES SHADE CARD TRACTOR UNO
PRINTED FANDECK*
For removing stains, wipe clean with a wet > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
cloth. Ensure a drying time of minimum 2 this level within 4 hrs of application.
weeks from application before clearning. > Do not over-thin or over-extend the brush.

b. Flash point IS101/1987 Part 1, Sec 6: SAFETY FEATURES
Non-flammable
d. Stability of thinned paint: To be used > Kindly refer to the MSDS for Asian Paints Tractor Uno which gives detailed information on
within 2
4 hours safety measures while handling the paint, which is available on request.
> Store the container with the lid tightly closed in an upright position, in a cool, dry place
> No added Lead, Mercury or Chromium compounds. Version No. VN01/01/2014
PRODUCT CODE 0055
Tractor Uno Acrylic Distemper

Asian Paints Tractor Uno is a water based, interior wall paint. It is a value for money product that makes it
possible for consumers to have beautiful walls at affordable prices.
PRODUCT BENEFITS
Finish Colour
Asian Paints Tractor Uno Acrylic Distemper offers a It is available in a wide range of shades. Thus you can WATER BASED
smooth, matt finish. Your walls look like new for a longer choose your favourite colours for your walls.
time as the shades retain their brightness.
Washability
You can clean your stains with a wet cloth.
from April 2008.
PRODUCT FEATURES
950+*
BEST IN CLASS
On smooth primed masonry surface
HIGH
MEDIUM
LOW
*Asian Paints Tractor Uno is available in
more than 950 shades and Brilliant White
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS
85 - 100 s q.ft/kg**
MATT
1 kg 2 kg 5 kg 10 kg 20 kg
HOW TO APPLY

PLASTER New masonary surfaces VISCOSITY1 PERIOD
must be allowed to cure completely.
as the curing time for new masonary
surfaces. STEP 2
CLEANING Surface should be PRIMER (ST) / 0359 MTO*
SPRAY 15 - 20
SPRAY 20 - 25 6 - 8 HRS
free from any loose paint, dust or DECOPRIME CEMENT
BRUSH / ROLLER 30 - 40
PRIMER (WT) 0360 WATER 4 - 6 HRS
grease. Growths of fungus, algae 80% – 100 % SPRAY 20 - 25
or moss should be removed by wire
brushing and water. In case of areas STEP 3
having excessive dampness use ACRYLIC WALL SMALL AMOUNTS
PUTTY 1354 WATER TO IMPROVE N/A 4 - 6 HRS
Asian Paints SmartCare Damp Block PUTTY KNIFE FLOWABILITY
to limit further dampness.
STEP 4
FILLING FOR CRACKS For filling SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
SmartCare Crack Seal. STEP 2
PRIMER (ST) / 0359 MTO* SPRAY 20 - 25 6 - 8 HRS
FILLING FOR HOLES & DENTS SPRAY 15 - 20
DECOPRIME CEMENT
In case of dents and holes use 0360 WATER BRUSH / ROLLER 30 - 40 4 - 6 HRS
PRIMER (WT) 80% – 100 % SPRAY 20 - 25
Asian Paints Acrylic Wall Putty or BRUSH / ROLLER / SPRAY
ratio 1:3 SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
For interior surfaces or substrates STEP 7
that are subjected to continuous TRACTOR UNO
seepage or dampness, kindly
BRUSH
use Asian Paints SmartCare
Damp Block before the top coat STEP 8
application. TRACTOR UNO
BRUSH

* Mineral Turpentine Oil

COLOUR SPECTRA FAN DECK TRACTOR WALL FINISHES SHADE CARD TRACTOR UNO
PRINTED FANDECK*
For removing stains, wipe clean with a wet > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
cloth. Ensure a drying time of minimum 2 this level within 4 hrs of application.
weeks from application before clearning. > Do not over-thin or over-extend the brush.

b. Flash point IS101/1987 Part 1, Sec 6: SAFETY FEATURES
Non-flammable
d. Stability of thinned paint: To be used > Kindly refer to the MSDS for Asian Paints Tractor Uno which gives detailed information on
within 2
4 hours safety measures while handling the paint, which is available on request.
> Store the container with the lid tightly closed in an upright position, in a cool, dry place
> No added Lead, Mercury or Chromium compounds. Version No. VN01/01/2014
Finishes for Exterior Walls
PRODUCT CODE 1030
Apex Suprema Exterior Emulsion

Asian Paints Apex Suprema Exterior Emulsion is a smooth water-based, modified acrylic,
exterior wall finish with silicon additives.
PRODUCT BENEFITS
Warranty Excellent Anti-algal Performance Apex
Apex Suprema Exterior Emulsion Suprema Exterior Emulsion provides excellent
WATER BASED
is specially formulated to withstand harsh resistance to algal growth. This resists
environmental condition like rainfall, humidity appearance of black spots on walls due to
and heat. It comes with a comprehensive 6 year algal growth.
performance warranty
Heat Reflectant Property
Excellent Protection against UV Attack Apex
Apex Suprema Exterior Emulsion is available in
Suprema Exterior Emulsion provides extremely
over 760 shades which can reduce the
good protection against alkali and UV
temperature of the painted surface up to 5 °C. * All Asian Paints products contain no added
degradation thus ensuring that the shade Lead, Mercury, Arsenic or Chromium
from April 2008.
doesn’t fade and lasts longer.
PRODUCT FEATURES
WEATHER GUARD COLOURS AVAILABLE COVERAGE
BEST IN CLASS*
HIGH
760+* On normal masonry surface by brushing
MEDIUM
*Currently available in more than
1 COAT
LOW
760 shades as per the Asian Paints
Colour Spectra. 10 - 12 sq.m/l**
*In comparison to Ace

2 COATS
5 - 6 sq.m/l**
MATT SOFT SHEEN RICH SHEEN HIGH GLOSS
SMOOTH
20 ltr
**Actual coverage may vary from the quoted coverage due
Shelf life: 3 years from date of manufacture in original tightly Refer to sheen levels in technical details to factors such as method and condition of application and
closed containers away from direct sunlight and excessive surface roughness and porosity.
heat.
HOW TO APPLY

PLASTER New masonry surfaces APPLICATION PRODUCT THINNER DILUTION % APPLICATION1 RECOATING PERIOD2
must be allowed to cure completely. CODE (BY VOLUME) VISCOSITY (SEC) (HOURS)
as the curing time for new masonry TRUCARE WALL PUTTY
SUPREMA 0079 WATER 40% - 50% N/A 6 - 8 HRS
surfaces. (OPTIONAL)
CLEANING Surface should be free
from any loose paint, dust or grease. STEP 2
Growths of fungus, algae or moss TRUCARE EXTERIOR WALL 1019 BRUSH 90 - 110
should be removed by wire brushing PRIMER SUPREMA BRUSH 15 - 18
WATER SPRAY 40 - 45 4 - 5 HRS
OR EXTERIOR WALL PRIMER SPRAY 33
and water. When the underlying 0065 ROLLER 90 - 110
BRUSH / SPRAY / ROLLER
surface exhibits chalkiness, in spite
of thorough surface cleaning, use
Asian Paints SmartCare Primero. APPLICATION OF PRIMER IS MANDATORY. NOT DOING SO CAN LEAD TO FAILURE OF PAINT FILM
FILLING FOR CRACKS For filling STEP 3

cracks upto 3mm use Asian Paints FIRST COAT BRUSH MAX 40
SmartCare Crack Seal. APEX SUPREMA EXTERIOR BRUSH 25 - 35
1030 WATER SPRAY MAX 40 4 - 6 HRS
EMULSION SPRAY 25 - 35
FILLING FOR HOLES & DENTS! BRUSH / SPRAY / ROLLER
ROLLER MAX 40
In case of dents and holes use
STEP 4
TruCare Wall Putty Suprema or a mix SECOND COAT BRUSH MAX 40
of white cement and ine sand in the APEX SUPREMA EXTERIOR BRUSH 25 - 35
1030 WATER SPRAY MAX 40 4 - 6 HRS
ratio 1:3. EMULSION SPRAY 25 - 35
ROLLER MAX 40
For exterior surfaces or substrates
that are subjected to continuous
seepage or dampness, kindly use HORIZONTAL SURFACES LIKE TOP OF WINDOWS, LEDGES SHOULD BE PAINTED WITH 3 COATS OF APEX SUPREMA FOR GREATER PROTECTION
Asian Paints SmartCare
DampProof, before the top coat 1. As measured through a Ford cup. 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions. 3. Some
application. shades may require 3 coats for proper hiding.

COLOUR SPECTRA FAN DECK* ASIAN PAINTS IMAGINE EXTERIORS ACE AND APEX SHADE CARD
FORESITE SERVICE
Choosing the right combination of shades for your home can be

difficult. At such times, you could do with some professional help.
FORESITE
Asian Paints Foresite provides you with prints for your home in 3
colour combinations, as selected by you. Visit an Asian Paints Colour
World retail store which offers this service, and furnish a digital
photograph (resolution 300-dpi or more) to the dealer.

> Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4
hours of application.
> Do not over-thin or over-extend the brush.
> Tint using Asian Paints machine colourants only.
Asian Paints Apex Suprema Exterior Emulsion meets the > Tinted paints need thorough shaking immediately after tinter addition as well as before use. For extremely rough
LEEDS VOC criteria as per Indian Green Building Council surface including textures: Application by brush is recommended to ensure all the grooves are covered well.
version 1.0 as tested at Shriram Institute for Industrial
Research. Tested for Propex White (shade code 0908) > Paint will not cover existing cracks, proper care to be taken to ensure the cracks are filled first and then topcoat is applied.
> For surfaces having heavy algal infestation, proper cleaning followed by application of BIO BLOCK is mandated.
> Primer coat or only one coat of topcoat should not be kept exposed in monsoon. Complete application before
monsoon to be ensured.
POST PAINTING CARE > Specially in pre-monsoon season, horizontal surface to be coated first and then vertical. This will help reduce the
streak marks of algal growth if any.
For the best performance of the paint, ensure > For best performance ensure that the surface is dry. On moisture meter it should be under the green zone. In case
proper washing and cleaning of all algal and it is in Red zone, find out the source of water and address it before painting.
fungal growth, if any, at regular intervals of > pH of wall to be below 12, if higher use of Smart Care Primero recommended.
six months. > Thinned paint should be consumed within 24 hrs of dilution. Accordingly it is recommended to thin down only
necessary amount of paint. Post 24 hrs thinned paint may be susceptible for microbial attack.
> Ensure not to use Chlorinated water for dilution.
TECHNICAL DETAILS
SAFETY FEATURES
b. Sheen levels: 2 - 5 at 60 deg GH > Kindly refer to the MSDS for Asian Paints Apex Suprema Exterior Emulsion which gives detailed information
c. Flash point IS101/1987 Part 1, Sec 6: NA on safety measures while handling the paint, which is available on request.
d. Stability of thinned paint: To be used > Store the container with the lid tightly closed in an upright position, in a cool, dry place
within 24 hours > Keep out of reach of children and away from eatables.
> Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
> In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation
develops or persists.
> Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface
preparation to avoid dust inhalation.

> Left-Over Paint Disposal: Left-over paint/drums should not be disposed in soil/drains. Consumers should
consult a local recycling agency for proper disposal of paint/drums.
For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India
SmartCare
PRODUCT CODE: 6830
SmartCare Apcoflor WPF 200

Hygienic Wall Coating
Single pack, fast drying, hygienic, water based polyurethane dispersion wall finish.
FEATURES
• Single pack, water based VOC compliant wall coating.
• Hygiene wall coating confirming to the Global Migration Standards laid down in US-FDA: 175-300.
• Excellent anti - microbial performance.
• Suitable for both interior and exterior application.
• Allows moisture to breathe out, can be applied on green concrete/ damp surface.
• Excellent scrub resistance.
• Excellent resistance to stains and chemicals.
• Odour free and easy to apply.
• Easy to clean and maintain.
• APCOLITE universal stainer can be used for minor shade alterations.
• Finds application in sterile & clean rooms in pharmaceutical units, hospitals, food processing units,construction
requiring quick turn-around etc.
TECHNICAL DATA
Colour White and Pastels
Appearance Smooth – Eggshell to Satin
Recommended DFT/ Coat 75 microns
Theoretical Covering Capacity 4.5 sq.mtr/ ltr or 3.5 sq.mtr/ kg @ 75 microns DFT
Drying Time Surface Dry : 20 minutes
Hard Dry : 4 hours
Full Cure : 3 days
Overcoating interval Min. : 30 minutes
Max. : 24 hours, beyond which roughen the
surface by sanding
The data given is for guideline only. The physical values are subject to normal manufacturing tolerances, colour and
testing variances. The coverage & consumption figures are theoretical and do not allow for any additional material
required due to surface porosity, surface profile, variations in level or wastage etc.
The actual drying time/ overcoat interval may be shorter or longer, depending on film thickness, ventilation,
humidity, temperature etc. The information provided above is at 30°C and 65% relative humidity.
DIRECTIONS FOR USE

Surface Preparation
• Surface must be clean, sound & even for the topcoat application.
• A pply APCOFLOR WPF 200 with 1:1 dilution as primer.
• A pply suitable Acrylic/ Cement Putty to make the surface even for application of the finish coat. Once the putty
dries and becomes sufficiently hard, smoothen the surface by sanding with emery paper No. 320.
• A pply one even coat of APCOFLOR WPF 200 with 1:1 dilution (as primer) on the sanded surface prior to the
application of APCOFLOR WPF 200 topcoat.
VN17/06/2020.
SmartCare
MIXING
• A suitable power driven/ manual mixer/ stirrer is recommended for uniform thinning of the product prior to
application. 3 - 5% water dilution (potable water) is recommended. Mix well and ensure homogeneity before
applying.
APPLICATION
• After thinning down to desire viscosity, apply liberally with brush followed by sponge roller on the prepared
primed surface with approx DFT of 75 microns per coat. 2 to 3 coats of APCOFLOR WPF 200 may be sufficient
for complete opacity depending on the shades.
• Avoid application at air and surface temperature below 10°C and above 40°C.
PRECAUTION
• Product will not freeze on storage but should be allowed to rise to 10°C before use.
• Do not apply when concrete surfaces or ambient temperatures are below 10°C.
• Do not keep open container for long period.
• Tools and equipments should be cleaned with water before the material dries.
PACK SIZE 15 Kgs

STORAGE Shelf Life: Atleast 12 months if stored properly in original,
unopened and undamaged sealed packaging, in dry conditions at
temperatures between 5°c To 35°c, subject to inspection thereafter.
Store in a cool, dry place and in accordance with local regulations
REGULATORY Flash Point: Not Applicable
Information Voc: 100 Gm/ Ltr As Per Usa-epa Method 24
SAFETY INFORMATION
• As a general safety measure, inhalation of solvent vapours or coating mist and contact of coating with skin &
eyes should be avoided. Forced ventilation should be provided when applying coating in confined spaces or
stagnant air. Even when ventilation is provided, respiratory, skin and eye protection are always recommended
when spraying the coating.
• Please refer our Material Safety Data Sheet prior to using the product
Disclaimer: To the best of our knowledge the information provided herein are true and accurate at the date of issuance. Since we have no control over the quality or
condition of the substrate or the various factors affecting the use and application of the product, we do not accept any responsibility or liability arising out of use of the
product. The company reserves the right to modify data contained herein without prior notice. Any change in data would normally be followed by issue of a new
data-sheet. The user should check with the nearest sales office of the company and confirm the validity of the information, prior to using the product.
‘APCOFLOR’ is a Trademark of Asian Paints Ltd. | Licensed user: Asian Paints Ltd.
Head. Ofﬁce: Asian Paints Ltd., 6A, Shantinagar, Santacruz (E), Mumbai - 400 055
Call: 1800-209-5678, E-mail: customercare@asianpaints.com, Website: www.asianpaints.com
VN17/06/2020.
PRODUCT CODE 1016
Apex Duracast SwirlTex

Asian Paints Apex Duracast SwirlTex is a synthetic intermediate finish designed with high quality exterior
durable acrylic modified resin and special quality silica quartz. With its unique engraved finish Apex
Duracast SwirlTex offers a wide range of patterns that combine decoration and protection.
PRODUCT BENEFITS
Hides Cracks UV Resistance
It hides surface undulations and fine cracks. It has excellent UV resistance and adhesion.
Anti-algal Tough Textured
Resists fungus and algal growth, when applied The tough textured finish lasts for long and
as a system with the recommended top coat. ensures low maintenance.
Releases Trapped Moisture Plaster Protection
It releases trapped moisture both from paint It increases the life of the plaster by protecting * All Asian Paints products contain no added
surface as well as the substrate. it from wind driven rain. from April 2008.
PRODUCT FEATURES
FINISH COLOURS AVAILABLE COVERAGE
1500+* On normal masonry surface by a

trowel or spatula to obtain an even
coating of ~ 1.5 mm
HORIZONTAL VERTICAL
SCRATCH SCRATCH
*Apex / Apex Ultima / Apex Ultima
Metallic needs to be applied as a
topcoat.
AVAILABLE PACKS
SWIRL RAINFALL 1 COAT

3.07 - 3.6 sq. m/kg**
(3 - 3.5 sq. ft/kg)**
25 kg polysack
Tough Texture: Lasts long and ensures low maintenance heat. surface roughness and porosity.
HOW TO APPLY

APPLICATION PRODUCT THINNER DILUTION % APPLICATION1 RECOATING PERIOD2
PLASTER New masonary surfaces CODE (BY VOLUME) VISCOSITY (SEC) (HOURS)
must be allowed to cure completely. STEP 1
It is recommended to allow 28 days ASIAN PAINTS WALL PUTTY BASED ON
(OPTIONAL)
as the curing time for new masonary 0079 WATER REQUIREMENT PASTE FORM 4 HRS
surfaces. TO FORM PASTE
CLEANING Surface should be

STEP 2
free from any loose paint, dust or
EXTERIOR WALL PRIMER / BRUSH 90 - 110
grease. Growths of fungus, algae PROFESSIONAL EXTERIOR 0065 SPRAY 40 - 45 BRUSH 15 - 18
WATER 4 HRS
or moss should be removed by wire PRIMER 1019 ROLLER 90 - 110 SPRAY 33
brushing and water. In case of areas BRUSH / SPRAY / ROLLER
having excessive dampness use
Asian Paints SmartCare DampBlock
HORIZONTAL SURFACES LIKE TOP OF WINDOWS, LEDGES SHOULD BE PAINTED WITH 3 COATS OF APEX ULTIMA FOR GREATER PROTECTION
to limit further dampness. When
chalkiness, in spite of thorough APPLICATION OF PRIMER IS MANDATORY ONLY FOR RE-PAINTING SURFACES
surface cleaning, use Asian Paints
SmartCare Exterior Sealer. STEP 3
FILLING FOR CRACKS For filling FIRST COAT
ASIAN PAINTS NOT
cracks upto 3mm use Asian Paints 1016 N/A N/A 12 - 16 HRS
DURACAST SWIRLTEX RECOMMENDED
SmartCare Crack Seal. TROWEL
STEP 4
In case of dents and holes use Asian 2 - 3 COATS 0068 BRUSH MAX 40
Paints Wall Putty or white cement ASIAN PAINTS 0012 WATER SPRAY MAX 40
BRUSH 25 - 35
4 - 6 HRS
and fine sand in the ratio 1:3 APEX ULTIMA/APEX/PROPEX SPRAY 25 - 35
1030 ROLLER MAX 40
Apex Duracast SwirlTex should
not be applied on surfaces / 1. As measured through a Ford cup.
substrates that are subjected to 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
continuous seepage or dampness. 3. Some shades may require 3 coats for proper hiding.

COLOUR SPECTRA FAN DECK* ULTIMA BOOK OF COLOUR IMAGINE EXTERIORS SKYLINE APEX DURACAST
(FOR HOMES) (FOR RESIDENTIAL TOWERS) TEXTURES THAT TRANSFORM
FORESITE SERVICE
Choosing the right combination of shades

for your home can be difficult. At such times,
FORESITE
you could do with some professional help.
Asian Paints Foresite provides you with prints
for your home in 3 colour combinations, as
selected by you. Visit an Asian Paints Colour
World retail store which offers this service,
and furnish a digital photograph (resolution
300-dpi or more) to the dealer. Note: Texture/pattern will not show on the image

> Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
this level within 4 hrs of application.
> Use of Universal Stainers or colourants is not recommended.
> Thinning is not advisable.
> Do not keep material open for a long time.
Asian Paints Apex Duracast Swirltex meets the LEEDS VOC
criteria as per Indian Green Building Council version 1.0 as > Product cannot be applied on surfaces/substrates that are subjected to continuous seepage or
tested at Shriram Institute for Industrial Research. Tested for dampness.
Duracast Swirltex White (shade code 0908)
> Stir well before use.
POST PAINTING CARE SAFETY FEATURES
For the best performance of the paint, ensure > Kindly refer to the MSDS for Asian Paints Apex Duracast SwirlTex which gives detailed
proper washing and cleaning of all algal and information on safety measures while handling the paint, which is available on request.
fungal growth, if any, at regular intervals of > Store the container with the lid tightly closed in an upright position, in a cool, dry place
six months. > Keep out of reach of children and away from eatables.
TECHNICAL DETAILS
a. Drying time: Surface dry time 30 - 60 min > Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
b. Sheen levels: NA and surface preparation to avoid dust inhalation
c. Flash point IS101/1987 Part 1, Sec 6: NA > Do not pour leftover paint down the drain or in water courses.
d. Stability of thinned paint - To be used > In the event of spills, contain spillage using sand or earth.
within 2
4 hours > No added Lead, Mercury or Chromium compounds.
For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India
Finishes for Wood / Wall / Metal Surfaces
PRODUCT CODE 0026 / 0001
Apcolite Premium Gloss Enamel

Asian Paints Apcolite Premium Gloss Enamel imparts a shiny new look to surfaces painted with this finish. It
forms a tough film that is highly resistant to household stains. It thereby serves as a protective armour around
the painted surface.
PRODUCT BENEFITS
High Gloss Finish Stain Gaurd SOLVENT BASED

Apcolite Premium Gloss Enamel gives a mirror like gloss Apcolite Premium Gloss Enamel is a highly washable
for your doors, windows, grills & gates paint, thus you can wipe off most common household
stains easily
Tough and Durable
The oil based film of Apcolite Premium Gloss Enamel
makes it one of the toughest & most durable paints
which forms a protective armour around surfaces * All Asian Paints products contain no added
from April 2008.
PRODUCT FEATURES
BEST IN CLASS
HIGH
1737* On smooth masonry surface by brushing
MEDIUM
*Currently available in 1737 1 COAT
LOW shades as per the Colourworld
Fandeck 185 - 225
sq.ft/ltr**
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS 95 - 110
sq.ft/ltr**
SILKY SMOOTH
1 ltr 4 ltr 10 ltr 20 ltr
Also available in 50 ml,100 ml, 200 ml and 500 ml Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
Shelf life: 3 years from date of manufacture (1 year in case to factors such as method and condition of application and
of Gold (M003) & Silver (M002) shades), in original tightly surface roughness and porosity.
closed containers away from direct sunlight and excessive
heat.
HOW TO APPLY
PLASTER New masonry surfaces VISCOSITY1 PERIOD
must be allowed to cure completely. STEP 1
It is recommended to allow 28 days SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
as the curing time for new masonry
surfaces. STEP 2
METAL PRIMER (METAL) / 0005 BRUSH 4 - 10 BRUSH 30 - 40
CLEANING Surface should be DECOPRIME ST (MASONORY) / 0359 MTO* SPRAY 12 - 15 SPRAY 20 - 25 6 - 8 HRS
free from any loose paint, dust or WOOD PRIMER (WOOD) 0007
grease. Growths of fungus, algae STEP 3
or moss should be removed by KNIFING PASTE FILLER (METAL 0016 WATER 6 - 8 HRS
/ WOOD) BASED ON BASED ON
wire brushing and water. In case of OR
REQUIREMENT REQUIREMENT
WALL PUTTY (MASONORY) 1354 MTO 4 - 6 HRS
areas having excessive dampness PUTTY KNIFE
use Asian Paints DampBlock to
STEP 4
limit further dampness. When SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
STEP 5
chalkiness, in spite of thorough 0005
METAL PRIMER (METAL) / BRUSH 4 - 10 BRUSH 30 - 40
surface cleaning, use Asian Paints DECOPRIME ST (MASONORY) / 0359 MTO* SPRAY 12 - 15 SPRAY 20 - 25 6 - 8 HRS
SmartCare Exterior Sealer. WOOD PRIMER (WOOD) 0007
FILLING FOR CRACKS For filling STEP 6

masonry upto 3mm use Asian Paints SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
SmartCare Crack Seal.
STEP 7
FILLING FOR HOLES & DENTS FIRST COAT APCOLITE 0001 BRUSH 8 - 10 BRUSH 55 - 60
PREMIUM GLOSS ENAMEL MTO* SPRAY 15 - 20 SPRAY 22 - 25 6 - 8 HRS
In case of dents and holes use 0026
Asian Paints Acrylic Wall Putty or
SECOND COAT APCOLITE 0001 BRUSH 8 - 10 BRUSH 55 - 60
ratio 1:3 MTO* SPRAY 15 - 20 SPRAY 22 - 25 6 - 8 HRS
PREMIUM GLOSS ENAMEL 0026
Apcolite Premium Gloss Enamel BRUSH / ROLLER / SPRAY
should not be applied on surfaces
/ substrates that are subjected to 1. As measured through a Ford cup.
continuous seepage or dampness. 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
*
Mineral Turpentine Oil
3. Ensure that the metal substrates are free from oil, grease and rust before paint application.
Finishes for Wood / Wall / Metal Surfaces

COLOUR SPECTRA FAN DECK* APCOLITE ENAMEL SHADE CARD
proper washing and cleaning of all algal and this level within 4 hrs of application.
fungal growth, if any, at regular intervals of > Do not over-thin or over-extend the brush.
six months. > Tint using Asian Paints machine colourants only
a. Drying time: Surface dry time 3 hrs

b. Gloss levels: 75 - 85 on tin plate at 20 Deg
Gloss Head SAFETY FEATURES
c. 1s101/1987 Part 1 Sec 6 35 Deg C (95
Deg F)
> Kindly refer to the MSDS for Asian Paints Apcolite Premium Gloss Enamel which gives detailed
d. Stability of thinned paint: To be used information on safety measures while handling the paint, which is available on request.
within 24 hours

Asian Paint

Uploaded by

Copyright:

Available Formats

Asian Paint

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Asian Paint

Uploaded by

Copyright:

Available Formats

Under Coats

PRODUCT CODE 5440

Professional Wall Putty

White* On rough masonry surface by putty knife

DRYING TIME TO RECOAT RECOMMENDED USAGE

POST PAINTING CARE PRECAUTIONS

Version No. VN01/01/2014

Acrylic Wall Putty

smoothness and consistency new walls

White* On primed masonry surface by putty knife

DRYING TIME TO TOUCH RECOMMENDED USAGE

PLASTER New masonary APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING

POST PAINTING CARE PRECAUTIONS

a. Drying time: Surface dry time 30 min

Version No. VN01/01/2014

PRODUCT CODE 6715

SmartCare Waterproof Wall Putty

Superior Water Resistance Provides smooth and uniform finish to rough

Vibrant White Finish Good Tensile Adhesion Strength,Compressive

AVAILABLE PACKS COLOURS AVAILABLE COVERAGE

White* On rough masonry surface by putty knife

DRYING TIME TO RECOAT RECOMMENDED USAGE

CLEANING Ensure that surface STEP 2

POST PAINTING CARE PRECAUTIONS

Keep out of reach of children and away from food, drink

Safety Data Sheet available on request.

PRODUCT CODE 0086

Professional Primer (Water Thinnable)

benefits: d) Environment friendly, contains no added lead,

properties Lead, Mercury, Arsenic or Chromium

White On smooth masonry surface by brushing

DRYING TIME TO RECOAT RECOMMENDED USAGE

PLASTER New masonary APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING

CLEANING Ensure that surface STEP 2

FILLING FOR HOLES & DENTS

VOC CONTENT PRECAUTIONS

TECHNICAL DETAILS SAFETY FEATURES

Version No. VN01/01/2014

PRODUCT CODE 1087

SmartCare High Performance Yellow Metal Primer

AVAILABLE PACKS COVERAGE

PAINT APPLICATION PROCESS

* As measured in a Ford cup B4.

POST PAINTING CARE PRECAUTIONS

TECHNICAL DETAILS SAFETY FEATURES

Version No. VN01/12/2013

PRODUCT CODE 1031

Apcolite Suprema Premium Interior Emulsion

WASHABILITY COLOURS AVAILABLE COVERAGE

AVAILABLE PACKS FINISH

PRE PAINTING STEPS PAINT APPLICATION PROCESS

HOW TO CHOOSE COLOURS

COLOUR SPECTRA FAN DECK* INTERIOR COLOUR COMBINATIONS GUIDE

VOC CONTENT PRECAUTIONS

POST PAINTING CARE SAFETY FEATURES

PRODUCT CODE 0055

Tractor Uno Acrylic Distemper

WASHABILITY COLOURS AVAILABLE COVERAGE

AVAILABLE PACKS FINISH