Multi Inverter 4TXM6530A-SUB-1G
Multi Inverter 4TXM6530A-SUB-1G
Multi Inverter 4TXM6530A-SUB-1G
35.1 13.4
27.6
37.2 15.6
22.0
14.5
Notes
a. The refrigerant charge mentioned in the technical data does not include additional charge required for the indoor
unit and the refrigerant pipe.
b. The amount of the additional refrigerant charge depends on the diameter and length of the liquid
refrigerant pipe installed .
c. Record the additional refrigerant charge for future maintenance.
1). Calculation of the Additional Refrigerant Charge
Shortest Safe Longest Safe Maximum tubing Maximum tubing (+/ ) oz per
Model#
range() range() length() Li() outside safe range
4TXM6518A1020 33 66 66 16 0.2
4TXM6524A1030 49 98 230 33 0.2
4TXM6530A1040 66 132 230 33 0.2
4TXM6536A1040 82 135 230 33 0.2
4TXM6542A1050 98 164 230 33 0.2
0.2 oz ft
Ductless Multi-Zone Approved Combinations
Indoor Unit
Outdoor Unit Two Units Three Units Four Units Five Units
4TXM6518A1020 9+9
18,000 BTUH 9+12
Outdoor Unit Two Units Three Units Four Units Five Units
4TXM6524A1030 9+9 9+12 9+9+9 9+12+12 12+12+12
24,000 BTUH 9+18 12+12 9+9+12 9+9+18
12+18 18+18
Outdoor Unit Two Units Three Units Four Units Five Units
4TXM6530A1040 9+9 9+12 9+9+9 9+9+12 9+9+18 9+9+9+9 9+9+9+12 9+9+12+12
30,000 BTUH 9+18 12+12 9+12+12 9+12+18 12+12+12
12+18 18+18 12+12+18
Outdoor Unit Two Units Three Units Four Units Five Units
4TXM6536A1040 9+9 12+18 9+9+9 9+12+18 12+12+18 9+9+9+9 9+9+12+18
36,000 BTUH 9+12 12+24 9+9+12 9+12+24 12+12+24 9+9+9+12 9+9+18+18
9+18 18+18 9+9+18 9+18+18 12+18+18 9+9+9+18 9+12+12+12
9+24 18+24 9+9+24 9+18+24 18+18+18 9+9+9+24 9+12+12+18
12+12 24+24 9+12+12 12+12+12 9+9+12+12 12+12+12+12
Outdoor Unit Two Units Three Units Four Units Five Units
4TXM6542A1050 9+9 12+18 9+9+9 9+12+24 12+12+24 9+9+9+9 9+9+12+24 9+12+18+18 9+9+9+9+9 9+9+9+18+18
42,000 BTUH 9+12 12+24 9+9+12 9+18+18 12+18+18 9+9+9+12 9+9+18+18 9+18+18+18 9+9+9+9+12 9+9+12+12+12
9+18 18+18 9+9+18 9+18+24 12+18+24 9+9+9+18 9+9+18+24 12+12+12+12 9+9+9+9+18 9+9+12+12+18
9+24 18+24 9+9+24 9+24+24 12+24+24 9+9+9+24 9+12+12+12 12+12+12+18 9+9+9+9+24 9+12+12+12+12
12+12 24+24 9+12+12 12+12+12 18+18+18 9+9+12+12 9+12+12+18 12+12+12+24 9+9+9+12+12 9+12+12+12+18
9+12+18 12+12+18 18+18+24 9+9+12+18 9+12+12+24 12+12+18+18 9+9+9+12+18 12+12+12+12+12
This unit is pre-charged from the factory. This Refrigeration system controls include The coil shall consist of aluminum finned
unit is designed to operate at outdoor ambi- condenser fan and compressor relay. coils brazed to copper tubing. The coil
ent temperatures as high as 110°F. Cooling High and low pressure controls are inher- provides air flow resistance and efficient
capacities with the mini-split air handler ent to the compressor. A suction line heat transfer. The coil is protected by the
shown in the catalog are AHRI certified. The multi function service valve is standard casing.
unit is ETL listed for outdoor application.
Compressor Low Ambient Cooling
Unit Casing
The compressor features internal over Matched Trane ductless products, have a
The unit casing is constructed of heavy temperature and pressure protection; cooling capability to 0° F.
gauge, galvanized steel and painted with a total dipped hermetic motor windings.
weather-resistant powder paint. Other features include: centrifugal oil
pump and low vibration and noise.
Optional Equipment
See the Service First Mini-Split Accessory Catalog for the complete accessory list.
10/15
The manufacturer has a policy of continuous product and product data improvement and it reserves the right
to change design and specifications without notice.