Tracked Jaw Crusher: Quality Engineered Excellence Since 1911
Tracked Jaw Crusher: Quality Engineered Excellence Since 1911
Quality Engineered
Excellence Since 1911
Parker Tracked Jaw 1100mm x 650mm (43” x 26”)
2520
TRANSPORT:
WIDTH: 2800mm (9’ 2”)
TRANSPORT
HEIGHT: 3600mm (11’ 10”)
3600
2100
LENGTH: 15050mm (49’ 4’)
2800
TRANSPORT
4340
4730
4250
3350
3780 3800
14730
15050
TRANSPORT
Grizzly Section Magnet journals. Both the fixed and moving jaws are retained
with a wedge locking system. The main frame and
The grizzly section is a double step A magnetic cross-belt separator is suspended over swing jaw holder are protected from wear due to the
grizzly that is easily removed. the on-plant product conveyor and is complete with unique design of the jaw faces that completely protect
permanent magnet and a hydraulic drive (optional). the inlet and outlet points of the crushing chamber.
Forward Product
bolted mainframe and a cast swing jaw holder. The
crusher is designed to handle hard rock, ores and
NOTE: Capacities quoted are intended as a guideline only, and are based on a clean, dry graded continuous feed material (weighing 1600kg/m³ (100lb/ft³) and a S.G of 2.7 average), which will readily enter the crusher feed opening without obstruction, with 100%
greater than the jaw setting and 25% less than twice the jaw setting. Actual capacities can vary considerably from those given, due to the following application and operational factors: 1) MATERIAL - Friability & Toughness, 2) FEED CONDITIONS - Grading of
Dec11
feed size (Compliance with Euro STD). 3) INSTALLATION - Method of feeding, Removal of under size. [Operation at settings outside those stated should be referred to the works].
Parker Plant Limited, Viaduct Works, Canon Street, Leicester, LE4 6GH, United Kingdom
T: +44 (0) 116 266 5999 F: +44 (0) 116 266 4422 W: www.parkerplant.com E: sales@parkerplant.com
All reasonable steps have been taken to ensure the accuracy of this publication. However, due to our policy of continual product development, Parker Plant Limited reserve the right to
change details without prior notice. All machines supplied in accordance with our standard conditions. Illustrations and photos may show optional equipment.