Mini-Clock

Operating / Installation Instructions

5 1 Key to activate the setting capabilities

6 2/ Time setting keys forwards / backwards

1 O
8 3
2
3 20:05
3 7 4 ON / OFF key to activate / deactivate the preset
time
1
5 Current time, preset time and heating time
2 6 Symbol for activated preset time
4
Continuous operation:
General remarks Press key 3 and keep it depressed while pressing key 4. The
Setting and operating the Mini-Clock heater will now remain switched on until key 4 (switching off the
• If a key is not depressed within 15 seconds, the display will return heater) is pressed again.
to its initial state – Current time.
• When setting the time with the keys 2 or 3, the setting speed is Preset time – Activate / deactivate:
accelerated when the key is kept depressed. Press key 1 to select the preset time 1, 2 or 3. Activate or deacti-
• Up to three preset times can be set and activated on this Mini- vate the preset time with key 4.
Clock. Each preset time is deactivated after the heating The “ON” symbol is displayed when the preset time is activated.
period, and it must be newly activated for each new heating Symbol 1, 2 or 3 is displayed when the preset time is activated.
period – see activate / deactivate the preset time.
Special functions only in conjunction
Setting functions on the Mini-Clock with the TP41 / TP41i remote control
Setting-up for the first time: Programming the receiver to recognize the transmitter:
After connection to the power supply all symbols on the display will Press key 2 and keep it depressed while pressing key 4.
start to flash. The heater cannot be turned on in this state. The The display indicates 2 horizontal lines.
current time has to be set first. The display returns to its initial state when the receiver has been
Press key 1: The clock time flashes. Set the time with key 2 or 3. successfully programmed. The display automatically returns to the
Press key 1: The time is displayed; the colon flashes. initial status after 35 seconds if the transmitter is not recognized. In
this case repeat the above procedure once again.
Setting the time:
Press key 1 for more than 3 seconds: The time flashes. Set the time Installing and connecting the Mini-Clock
with key 2 or 3. Press key 1 within 5 seconds: The time is displayed Follow the drawing to install the Mini-Clock.
and the colon flashes. The drilling template (can be peeled off and is self-adhesive)
Note: is applied on the front.
If, after the time has been set, key 1 is not pressed within 5 seconds, Follow the diagram to connect the Mini-Clock.
the Mini-Clock will be transferred to the mode “Setting the Heating Note:
Time”. Do not press the display and control panel when installing the Mini-
Clock.
Setting the heating time:
Press key 1 for more than 3 seconds: The time flashes. The Mini- Mounting drawing
Clock is automatically transferred to the mode “Setting the Heating
Time” if no key is pressed for 5 seconds. Drilling template Resilient base
The heating symbol is displayed, and the heating time flashes. for uneven mounting surfaces
Set the heating time (10 to 120 minutes) with key 2 or 3. o
o
7,5

Press key 1: The time is displayed once again and the colon flashes. 2,5

Eberspächer

Setting the preset time:

ON

20:05
Press key 1 once, twice or three times to call the preset time 1, 2 1

or 3. The display will then indicate the preset time, for instance 1
and symbol 1. Set the preset time with key 2 or 3. The preset time
is activated or deactivated with key 4. The “ON” symbol is displayed
when the preset time has been activated.
Symbol 1, 2 or 3 is displayed when the preset time is activated.
Connecting diagram D
Operating functions of the Mini-Clock B1S1
B1 3 4 0,5 rt rt
4

S
1
3

0,5 ge ge 88:88
Switching on the heater: 1 2
1

432

Press key 4. The heating duration is … minutes. S1

0,5 br br
bl
The display indicates the remaining heating time and symbol 7. 4 3
2 1
G
Switching off the heater: Connection for TP41 / TP41i remote control B
Press key 4. The heating continues for approx. 3 minutes.
Plug and socket case are shown from the line entry side.
The display indicates the current time. F