Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    SAIC-L-2084 Material Storage and Preservation (EE) PDF

    Uploaded by

    Anonymous S9qBDVky
    This document is a Saudi Aramco inspection checklist for the storage and preservation of well head piping materials. It contains acceptance criteria for properly storing, handling, and preserving pipes, fittings, flanges, and valves. Pipes must be stored and handled in a way that does not damage the pipe or internal/external coatings. Fittings and flanges must be packaged or secured properly. Valve ends must be covered and protected from moisture and mechanical damage. The checklist includes items to inspect and acceptance criteria, along with references to Saudi Aramco standards documents. Signoff sections are included for contractor, inspection, and quality approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SAIC-L-2084 Material Storage and Preservation (EE) PDF

    Uploaded by

    Anonymous S9qBDVky
    1K views3 pages
    This document is a Saudi Aramco inspection checklist for the storage and preservation of well head piping materials. It contains acceptance criteria for properly storing, handling, and preserving pipes, fittings, flanges, and valves. Pipes must be stored and handled in a way that does not damage the pipe or internal/external coatings. Fittings and flanges must be packaged or secured properly. Valve ends must be covered and protected from moisture and mechanical damage. The checklist includes items to inspect and acceptance criteria, along with references to Saudi Aramco standards documents. Signoff sections are included for contractor, inspection, and quality approval.

    Original Title

    SAIC-L-2084 Material Storage and Preservation (EE).pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a Saudi Aramco inspection checklist for the storage and preservation of well head piping materials. It contains acceptance criteria for properly storing, handling, and preserving pipes, fittings, flanges, and valves. Pipes must be stored and handled in a way that does not damage the pipe or internal/external coatings. Fittings and flanges must be packaged or secured properly. Valve ends must be covered and protected from moisture and mechanical damage. The checklist includes items to inspect and acceptance criteria, along with references to Saudi Aramco standards documents. Signoff sections are included for contractor, inspection, and quality approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views3 pages

    SAIC-L-2084 Material Storage and Preservation (EE) PDF

    Uploaded by

    Anonymous S9qBDVky
    This document is a Saudi Aramco inspection checklist for the storage and preservation of well head piping materials. It contains acceptance criteria for properly storing, handling, and preserving pipes, fittings, flanges, and valves. Pipes must be stored and handled in a way that does not damage the pipe or internal/external coatings. Fittings and flanges must be packaged or secured properly. Valve ends must be covered and protected from moisture and mechanical damage. The checklist includes items to inspect and acceptance criteria, along with references to Saudi Aramco standards documents. Signoff sections are included for contractor, inspection, and quality approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SAUDI ARAMCO ID/PID - 2/19/05 - REV 0 (Standards Cutoff - August 2004)

    SAIC NUMBER DATE APPROVED QR NUMBER


    SAUDI ARAMCO INSPECTION CHECKLIST
    Storage and Preservation of Materials of Well Head Piping SAIS-L-2084 25-May-05 PIPING -
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    A. Pipe Storage, Handling and Preservation

    Pipe handling procedure and equipment is approved by the Saudi SAES-L-450,


    A1
    Aramco PMT, and is available. Para. 8.1
    End bevel protectors shall remain on pipes and fittings while in storage, SAES-L-450,
    A2
    protectors shall not damage internal or external coating. Para. 8.4
    Slings for lifting pipe shall be nylon or similar material to prevent damage SAES-L-450,
    A3
    to the pipe surface. Wire rope slings shall not be used. Para. 8.5
    SAES-L-450,
    A4 Pipe shall not be rolled or dropped off trucks.
    Para. 8.6
    Pipe stacking shall be made in a manner which will not damage the pipe SAES-L-450,
    A5
    or the coating. Para. 8.3
    Internally coated pipe shall be handled from the outside diameter (O.D.), SAES-L-450,
    A6
    only. Para. 8.7
    When a length of pipe is cut from a longer joint of pipe, all vendor
    SAES-L-450,
    A7 markings and other identifying information shall be transferred to each
    Para. 8.8
    length of pipe.

    B. Storage, Handling and Preservation of fittings & Flanges

    Fittings and Flanges must be packaged in steel-banded wooden crates 02-SAMSS-011,


    B1
    or secured to skids. Para. 10
    Fittings and Flanges must be protected from mechanical damage.
    02-SAMSS-011,
    B2 Welding ends must be protected with suitable wood, plastic, or metal
    Para. 10
    covers, (see Attachment 1).

    C. Storage, Handling and Preservation of Valves

    Valve end flanges shall be fitted with plywood covers. The cover
    diameter shall be the same as the outside diameter of the flange and 04-SAMSS-035
    C1
    shall be at least 10 mm thick for valves up to NPS 10 inch and 12 mm Para. 12.2
    thick for valves NPS 12 inch and larger.
    The cover shall be attached by machine bolts with a nut and washer
    fitted on the inside of the flange. There shall be four (4) bolts on valves
    04-SAMSS-035
    C2 up to NPS 10 inch nominal size and eight (8) bolts on valves NPS 12
    Para. 12.2
    inch and larger. The bolts diameter shall not be less than ½ the size of
    the flange bolt hole.
    The raised face portion of the flange and the ring joint groove shall be 04-SAMSS-035
    C3
    covered with a heavy grease, (see Attachment 1). Para. 12.2
    A heavy duty moisture-proof disc shall be fitted between the greased
    04-SAMSS-035
    C4 flange face and the cover. The disc shall have a diameter equivalent to
    Para. 12.2
    the inside diameter of the bolt holes.
    The ends of threaded and socket weld end valves shall be protected with 04-SAMSS-035
    C5
    tight fitting plastic caps. Para. 12.3

    Page 1 of 3
    SAUDI ARAMCO ID/PID - 2/19/05 - REV 0 (Standards Cutoff - August 2004)
    SAIC NUMBER DATE APPROVED QR NUMBER
    SAUDI ARAMCO INSPECTION CHECKLIST
    Storage and Preservation of Materials of Well Head Piping SAIS-L-2084 25-May-05 PIPING -
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    REMARKS:

    REFERENCE DOCUMENTS:
    1. SAES-L-450, Construction of On-Land and Near-Shore Pipelines, 30 September, 2003
    3. 02-SAMSS-011, Forged Steel Weld Neck Flanges for Low and Intermediate Temperature Service, 28 January, 2004
    3. 04-SAMSS-035, General Requirements for Valves, 31 July, 2001

    ATTACHMENTS:
    1. FIGURE 1 - Flanged Valves; FIGURE 2 - Weld End Valves

    Contractor / Third-Party Saudi Aramco


    Construction Representative* PMT Representative
    Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Inspector PID Representative


    Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Supervisor Proponent and Others


    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:

    *Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

    Page 2 of 3
    SAUDI ARAMCO ID/PID - 2/19/05 - REV A (Standards Cutoff - August 2004)
    SAIC NUMBER DATE APPROVED QR NUMBER
    SAUDI ARAMCO INSPECTION CHECKLIST
    Storage and Preservation of Materials of Well Head Piping SAIS-L-2084 25-May-05 PIPING -

    Attachment 1

    Page 3 of 3

    You might also like