Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Driver 22ar

    Uploaded by

    Diego Abarca
    Data sheet driver semikron 22ar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Driver 22ar

    Uploaded by

    Diego Abarca
    76 views1 page
    Data sheet driver semikron 22ar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Data sheet driver semikron 22ar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    76 views1 page

    Driver 22ar

    Uploaded by

    Diego Abarca
    Data sheet driver semikron 22ar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Isolation

    over
    input1 6k8/100 current S20 VCE* * * RVCE
    (TOP) V iT
    P12 3k2 3 output1
    -input buffer S15 RCE C CE (TOP)
    -short pulse
    input2 supression VS
    (BOTTOM) 6k8/100 -pulse shaper =

    © by SEMIKRON 30-09-2008
    ViB =
    P8 S14 Ron 4
    P7 3k2 Power
    GND/OV Roff
    GND/OV driver S13
    5
    P14
    TDT2 P9 over S12 1 LOAD
    * ** current S1 VCE** RVCE
    TDT1 P5 -interlock output2
    *** -deadtime *
    SELECT P6 VS S6 RCE C CE (BOTTOM
    V =
    * * * VS
    Error P10 =
    S7 R on 6
    RERROR -Vs monitor
    -Error monitor Power
    driver S8 R off
    7
    -Error memory
    VS V S9 2
    P13 S integrated in ASIC
    SEMITRANS
    input primary side secondary side output IGBT-Module

    * When SKHI22B is driving 1700V IGBTs, a 1kΩ / 0,4W RVCE-resistor must be connected in series to the VCE input.

    Driver Electronic – PCB Drivers


    ** The VCE-terminal is to be connected to the IGBT collector C. If the VCE-monitoring is not used, connect S1 to S9 or S20 to S12 respectively.
    *** Terminals P5 and P6 are not existing for SKHI22A/21A; internal pull-up resistor exists in SKHI22A/21A only.
    1-7 Connections to SEMITRANS GB-module

    You might also like