Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 318 views

    IDM96 (N00407) English

    Uploaded by

    Diego Cordova
    WE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    IDM96 (N00407) English

    Uploaded by

    Diego Cordova
    318 views5 pages
    WE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    WE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    318 views5 pages

    IDM96 (N00407) English

    Uploaded by

    Diego Cordova
    WE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Datasheet

    IDM 96
    Multimeter

    Multimeter for three or single phase mains with 56


    electrical measured variables. The instrument has
    harmonic measurement up to 63th order, THD for
    current and voltage and waveform capture. All
    parameters can be configured through keyboard or
    software, which one follows the instrument. The
    software allows view all variables, harmonics
    spectrum and waveform.

    Characteristics
    Three LED displays
    Waveform capture in the Modbus buffer for all three phases (current and voltage)
    Free included configuration and monitoring software with the instrument
    THD measurement for current and voltage. Harmonics (up to 63th )
    measurements, which can be viewed through software in form of table or
    histogram
    Easy configuration through keyboard or software
    Universal three phase connection, balanced and unbalanced load, or single phase.
    Plugable serial communication RS 485 (optional) protocol Modbus RTU
    Universal auxiliary supply 85...265VAC/90...300VDC
    Protection degree IP50 (housing) and IP20 (connectors)
    Accuracy class 0,5%

    Technical data

    Construction and mounting

    Input

    Housing

    Plastic anti-flame UL94-VO.

    Fastening

    Pair of clamps

    Protection degree

    IP50 housing
    IP20 connectors

    Weight

    ~ 0,45 kg

    Voltage (Vn)
    Current (In)

    0500VAC phase-phase
    1A , 5A

    Signal limit

    U = 10120%
    I = 10...120%

    Consumption

    Input signal voltage:


    Input signal voltage:

    2mA.
    0,2VA.

    Climatic conditions

    Nominal
    frequency

    50; 60 Hz 10%
    Permanent: 1,5 x Un ; 2 x In
    Short time: 4 x U/1s; 50 x I/1s
    Maximum: 250A /1s

    Overload

    Operating temperature

    -20...+60C

    Display temperature

    -20...+55C

    Storage temperature

    -40...+80C
    75%

    Auxiliary supply

    85 265VAC/90300VDC
    Consumption ~ 6VA

    Relative humidity

    Communication

    Serial RS485 Protocol Modbus RTU

    Connections diagrams Input signal

    Influence variables
    Error limit

    0,5%
    I = 10%...100%;
    U = 10%...100%
    U = 10120%
    I = 10...120%

    Input:
    Frequency:
    Additional error input 1,2xI
    or 1,2xU
    Linearity deviation

    0,2%
    0,2%
    (included in the error limit)
    0,2%/10 K;
    Nominal Temperature 25C

    Temperature error
    Auxiliary supply

    85 265VAC/90300VDC

    Connections diagrams Auxiliary supply and


    RS 485

    Electrical Tests
    Test voltage

    2,5kV/1 min 60 Hz between all


    circuits

    Mechanical tests
    Impact

    Acceleration 30g duration 11ms

    Vibration

    Acceleration 2g frequency 5..150Hz

    Variables
    Variable
    Voltage L1 and Neutral
    Voltage L2 and Neutral
    Voltage L3 and Neutral
    Voltage L1 and L2
    Voltage L2 and L3
    Voltage L3 and L1
    Current I1
    Current I2
    Current I3
    Active power P1
    Active power P2
    Active power P3
    Total Active Power PT
    Reactive power Q1
    Reactive power Q2
    Reactive power Q3
    Total Reactive Power QT
    Apparent power Q1
    Apparent power Q2
    Apparent power Q3
    Total Apparent Power QT
    Power Factor 1
    Power Factor 2
    Power Factor 3
    Power Factor T
    Frequency
    Current demand 1
    Current demand 2
    Current demand 3
    Active Power Demand
    Reactive Power Demand
    Apparent Power Demand
    Cos Phi 1
    Cos Phi 2
    Cos Phi 3
    Cos Phi T
    THD Voltage 1
    THD Voltage 2
    THD Voltage 3
    THD Current I1
    THD Current I2
    THD Current I3

    Dimensional (mm)

    Access
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus
    Display/Modbus

    Active Energy Consumed


    Reactive Energy Consumed
    Active Energy Supplied
    Reactive Energy Supplied
    Angle Phi 1
    Angle Phi 2
    Angle Phi 3
    Angle Phi T
    Voltage angle 1
    Voltage angle 2
    Voltage angle 3
    Current angle 1
    Current angle 2
    Current angle 3

    Display/Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus
    Modbus

    Caution
    Be sure that all connected voltage and current are
    compatible with the technical specification and if the
    connection are in accordance with the connections
    diagrams.

    Mounting Instructions
    The installation must regard the climatic conditions. It is
    important verify the vibration, dust, temperature and
    humidity, which must be in the specified limit. The
    mechanical fastening in the panel door is done through a
    pair of clamps, which is included with the instrument. The
    connection of the input voltage, auxiliary supply and RS 485
    should be done though pin terminal. The connections of the
    input current should be done though lug terminal.

    User guide
    Verify the connection diagrams and user manual to
    configure the instrument. Configure the PT ratio and the CT
    primary, connection, and communication (address, baud
    rate and byte are according to the local installation.

    Product specification
    IDM-96
    Nominal frequency
    50 Hz
    60Hz
    Connection (Universal)
    Single phase/ Three phase
    Current signal
    1A
    5A
    Voltage signal
    0500Vca (phase-phase)
    Auxiliary Supply
    85265VAC / 90300VDC
    Interface
    With RS485
    Without RS485
    Additional information
    Standard configuration:
    Default configuration, class 0,5%.
    Special configuration
    Inform a special configuration

    Example:
    Frequency:60Hz
    Input current: 5A
    Input voltage: 0500Vca (phase-phase)
    Auxiliary supply:
    85265VAC/90300VDC
    Interface: Without RS485
    Standard Configuration
    Code: N0040772424311

    N 0 0 4 0 7

    1
    2
    4

    1
    2
    4
    3
    1
    2
    1
    C

    Contact
    ABB Ltda.
    Avenida dos Autonomistas, 1496
    Osasco So Paulo - Brazil
    Zip code 06020-902
    Telephone 0800 014 9111
    Email: abbatende@br.abb.com

    Note:
    We reserve the right to make technical changes
    or modify the contents of this document without
    prior notice. With regard to purchase orders,
    the agreed particulars shall prevail. ABB BR
    does not accept any responsibility whatsoever
    for potential errors or possible lack of
    information in this document.
    CopyRight 2012
    All rights reseverd

    You might also like