Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 149 views

    ETM50EN

    Uploaded by

    Diego Cordova
    This document provides information about the Transducer ETM 50, which converts alternating sinusoidal voltages or currents into direct current or voltage signals. It measures RMS values of sinusoidal or non-sinusoidal electric magnitudes with linear measurement fields. Key specifications include measurement ranges of 0-100V and 0-1A or 0-5A, an output signal of 0-20mA, 4-20mA or 0-10V, and an operating frequency range of 50-60Hz. The transducer has a polyamide housing that mounts on a DIN rail and provides IP40 and IP20 protection levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ETM50EN

    Uploaded by

    Diego Cordova
    149 views4 pages
    This document provides information about the Transducer ETM 50, which converts alternating sinusoidal voltages or currents into direct current or voltage signals. It measures RMS values of sinusoidal or non-sinusoidal electric magnitudes with linear measurement fields. Key specifications include measurement ranges of 0-100V and 0-1A or 0-5A, an output signal of 0-20mA, 4-20mA or 0-10V, and an operating frequency range of 50-60Hz. The transducer has a polyamide housing that mounts on a DIN rail and provides IP40 and IP20 protection levels.

    Original Description:

    ZXDSD

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about the Transducer ETM 50, which converts alternating sinusoidal voltages or currents into direct current or voltage signals. It measures RMS values of sinusoidal or non-sinusoidal electric magnitudes with linear measurement fields. Key specifications include measurement ranges of 0-100V and 0-1A or 0-5A, an output signal of 0-20mA, 4-20mA or 0-10V, and an operating frequency range of 50-60Hz. The transducer has a polyamide housing that mounts on a DIN rail and provides IP40 and IP20 protection levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    149 views4 pages

    ETM50EN

    Uploaded by

    Diego Cordova
    This document provides information about the Transducer ETM 50, which converts alternating sinusoidal voltages or currents into direct current or voltage signals. It measures RMS values of sinusoidal or non-sinusoidal electric magnitudes with linear measurement fields. Key specifications include measurement ranges of 0-100V and 0-1A or 0-5A, an output signal of 0-20mA, 4-20mA or 0-10V, and an operating frequency range of 50-60Hz. The transducer has a polyamide housing that mounts on a DIN rail and provides IP40 and IP20 protection levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Transducer ETM 50

    Data Sheet - N00393/9

    For alternating current or voltage

    Page 1/4
    July 2005

    Caractersticas

    Measuring of sinusoidal electric magnitudes.


    Measuring RMS (Optional) of sinusoidal eletric magnitudes or not
    sinusoidal
    Linear measuring field.
    Output signal with or without supressed zero
    Galvanic isolation between input and output and auxiliary power
    supply.
    Reduced size for mounting space saving.
    Case type housing for fastening on rail.

    Application

    Conversion of an alternating sinusoidal voltage or current into a


    signal of direct current or voltage, which is independent on the load

    Functioning

    The transducer ETM 50 with alternating sinusoidal voltage or


    current input is a fully electronic instrument, which work on the
    principle of rectification.

    Technical data (NBR 8145)


    Input

    Voltage
    Current
    Power consumption

    Rated frequency
    Overload
    The transformer (1) attenuates the input signal for the rectifier (2) and
    effectuates a galvanic isolation between the in- and output signals. The
    amplifier (3) converts the input signal into an output of alternating
    voltage or current.
    The rectifier (2) and the output module (3) need an auxiliary power
    supply (4).

    Characteristic curves

    Output

    Current

    Signal limit
    Load limit
    Voltage
    Residual ripple

    Power supply

    0..100/110/220/380/500V
    (others on consult)
    01A ou 05A (others on consult)
    Voltage version: 0,65VA for class 0,5%
    1,00VA for class 0,25%
    Current version: 0,15VA
    50;60 Hz 10% (others on consult)
    permanently: 1,5 x UrtdI ; 2 x IrtdI
    briefly: 4 x UrtdI/1s; 50 x IrtdI/1s
    maximum: 250A/1s

    0.20mA, 4...20mA,010V
    (others on consult)
    1,5 IrtdO, UrtdO mx.
    25V; RC = infinite
    Rc=
    15.000(mV)

    max. output signal (mA)


    p.ex.: Rc=750 for 20mA
    0...10V; Rc500 (other by consulting)
    0,5% (peak to peak)

    85265Vca e 90300Vcc
    2060Vca/Vcc
    consumption: 3W aprox.

    Transducer ETM 50

    Data Sheet - N00393/9

    For alternating current or voltage

    Influence Magnitudes
    Error limit

    Reference condictions
    Input:

    Frequency:
    Form factor:
    Auxiliary Power supply:
    Load:
    Ambient temperature:
    Heat up time:
    Additional error above
    1,2IrtdI or UrtdI
    Linearity deviation
    Load
    Temperature
    Auxiliary power supply

    Response time
    External magnetic fields
    Radio frequency
    interference

    Electrical Test
    Test voltage

    Surge Voltage
    Radio frequency

    0,5% (standard)
    0,25% (option)
    UI = UrtdI
    II = 0...IrdtI for sinusoidal
    electrical magnitudes without
    zero displacement
    frtdI 2%
    1,111
    UAX 2%
    0,5 RC mx.
    25C 2K
    . 20 min
    0,2%
    0,2% (included in error limit)
    0,05% RC = 0....RC mx.
    (included in error limit)
    0,2% /10 K; rated
    temperature 25C
    0,05% within the permitted
    tolerance range for the supply
    voltage
    voltage
    200 ms
    0,5% for field intensity of
    0,4 kA/m
    0,5% between 27...460MHz
    at a distance of 1m; power 1W
    Uax. 85V : 2,5kV/1mim ; 60Hz
    (for all circuits mutually).
    Uax. 60V : 1,5kV/1min ; 60Hz
    (for all circuits mutually).
    5kV; 1,2/50us; 0,5Ws
    2,5kV;1MHz; 400 pulsos / 1s

    Notes:
    - With respect to the output span.
    - UrtdI = Rated voltage
    - IrtdI = Rated Current
    Response times below 200ms result in bigger residual ripple.

    Page 2/4
    July 2005

    Construction and Mounting


    Construction
    Material
    Fastening
    Eletrical connection
    Protection class
    Weight

    Climatic conditions

    In surface mouting case


    Polyamide UL94 VO
    Surface mouting using DIN rail.
    Terminals for pin shaped cable shoes.
    IP 40 housing
    IP 20 connection terminal
    0,1 kg

    Operation temperature
    Functioning temperature
    Transport and storage
    temperature
    Relative humidity

    Mechanical test

    Impact
    Vibration

    -20...+60C
    -25...+70C
    -40+80C
    75% of anual average, with
    light condensation
    (others on consult)
    acceleration 30g ; during 11ms
    acceleartion 2g ;frequency
    5..150Hz

    Transducer ETM 50

    Data Sheet - N00393/9

    For alternating current or voltage

    Page 3/4
    July 2005

    Additional information

    Electric Conections

    II
    II , UI
    UAx
    O1

    5
    UI

    =
    =
    =

    13 14

    + _
    61 62

    UAX

    O1

    Input Current or Voltage


    Auxiliary power supply
    Output current or voltage

    Dimensional Drawing
    Dimensions in mm

    The following items contain tips and cautions to be observed by


    the user for a good functional performance, as well as the
    maintenance of the instrument and the saftey of the installations.

    Cautions

    Be sure the voltage and current to be connected to the instrument,


    are compatible.
    Loosen all connections from the instrument before removing it
    from the installation.

    Mounting Instructions

    Observe the ambient temperature range. At the place of


    installation, values for vibration, dust, dirt and humidity, which
    must remain between the limits, established by the protection class
    of the housing and the climatic group, especified in this data sheet,
    have to be observed.

    For mounting on DIN rail, use the snap-in device on the rear of the
    instrument.
    The connections can be made with pin for shaped cable shoes.

    Instructions for Use

    When connections have been made, switch on the power supply


    and check at the output the functioning of the transducer.

    Transducer ETM 50

    Data Sheet - N00393/9

    For alternating current or voltage

    Page 4/4
    July 2005

    Ordering information
    Catalog number
    TRANSDUCER ETM-50 for alternated current or alternated voltage

    Housing
    Normal
    RMS

    3
    9

    Rated Frequency
    50 Hz
    60 Hz
    400 Hz
    Others

    1
    2
    3
    0

    Measuring range:
    Voltage: between 0...10 up to 0..20VAC
    between 0...21 up to 0...50VAC
    between 0...51 up to 0...97VAC
    between 0...98 up to 0...180VAC
    between 0...181 up to 0...340VAC
    between 0...341 up to 0...600VAC
    Current: 0...1A
    0...5A
    Others
    Auxiliary Power Supply
    2060Vca/Vcc
    85265Vca and 90300Vcc

    1
    2
    3
    4
    5
    6
    7
    8
    0
    12
    13

    Output Signal
    0...20mADC
    4...20mADC
    0...10VDC
    Others( 0...1mAdc at 20mAdc e 0...1Vdc at 0...15Vdc)
    Optional
    Error Limit 0,25%
    Others response times between 50ms and 2s
    Standard (Class 0,5%)
    Additional information
    Standard
    Complement (Inform input signal voltage)

    For quoting and ordering please issue your order according to the specification text.
    Example:
    Transducer ETM 50
    Rated frequency:
    60Hz
    Measuring range:
    05A
    AuxiliaryPower supply:
    85265Vca e 90300Vcc
    Output Signal:
    420mADC
    Options:
    Error limit 0,25%
    Additional information:
    Standard
    Code number : N003932813511

    ABB Ltda - ATIM/I Instrumentation Electrical


    Avenue Dos Autonomistas, 1496 - 06020-902 - Osasco - SP
    Phone: +55 11 3688-8320 / 8323 / 8347 - Fax: +55 11 3688-8322
    instrumentacao@br.abb.com

    4
    5
    6
    0
    1
    4
    5
    1
    C

    You might also like