Professional Documents
Culture Documents
NTN
NTN
ULTAGE Series P5
Spherical Roller Bearings [Type EA, Type EM] P7 ~ 8
ULTAGE Series
Sealed Spherical Roller Bearings [Type WA], Plummer Blocks P6
ULTAGE Series Spherical Roller Bearings [Type EA, Type EM] 3033/E
TRI-BALL JOINT Constant Velocity Joints (Small and Medium size) 5602/E
2
Paper For stable, high reliability
Manufacturing
Process performance...
The paper making process requires bearings having specific
capabilities for each part of the process. NTN ensures
reliable paper production by providing bearings that are
optimally suited for each process.
Pulp Manufacturing Paper Machine Wire Section Paper Machine Press Section
Process Paper formation begins by Additional water is removed from the
dewatering the paper stock feed wet paper sheet by the press rolls
1 2 3 4
ULTAGE series sealed spherical ULTAGE series thrust spherical ULTAGE series spherical roller bearings RustGuard corrosion-resistant
roller bearings [Type WA] roller bearings [Type EA, Type EM] bearings
3
Paper Machine Dryer Section Calender Stack Reel & Winder
& Size Press Rolls produce a smooth, glossy Main paper take-up roll and rewinding
Paper sheet drying is completed and paper surface into smaller size rolls
coatings are applied by the size press
➌ ULTAGE series spherical roller ➌ ULTAGE series spherical roller ➌ ULTAGE series spherical roller bearings
bearings [Type EA, Type EM] bearings [Type EA, Type EM] [Type EA, Type EM]
➏ Long operating life EA bearings ➐ Solid grease bearings ➐ Solid grease bearings
➑ Constant velocity joints ➑ Constant velocity joints ➑ Constant velocity joints
5 6 7 8 9
MEGAOHM™ insulated Long operating life EA bearings Solid grease bearings Constant velocity joints Triple-Lip sealed bearings for
bearings bearing units
4
ULTAGE Series
Type EA Type EM
Outer ring
• With oil inlets and oil
groove
• Optimal curvature
Rollers
• Symmetrical design
• Larger rollers
• Maximum number of
rollers
Cage Cage
Inner ring
• Window-type pressed steel • One-piece machined cage
cage • No rib required
• Optimal curvature
Features
35% higher
Basic static
load rating
Up to (compared to NTN
conventional products)
20% 200°C
Maximum Dimensional
shaft speed higher stability
Up to (compared to NTN
conventional products)
Up to
"ULTAGE" (a name created from the combination of "Ultimate," signifying refinement, and"stage," signifying NTN's
intention that this series of products be employed in divers eapplications) is the general name for NTN's new generation of
bearings that are noted for their industry-leading performance.
5
Products for Paper Manufacturing Machinery
ULTAGE Series
Features
● Interchangeability
Can be installed into standard type plummer blocks by adjusting fixing ring size.
These bearings are
shipped packed
Bearing Specifications with grease
• Lubricate with lithum based oil grease • 0.009 rad (0.5˚) 200
containing extreme pressure additives
Plummer Blocks
Features
6
ULTAGE Serise Spherical Roller Bearings
Long operating life, higher load capacities and enhanced high-
speed operation provide maximum equipment productivity
●C
omparison of other manufacturer’s cataloged ●C
omparison of other manufacturer’s cataloged
basic dynamic load rating values (Cr) basic static load rating values (Cor)
22216 (ø80 × ø140 × 33) 22216 (ø80 × ø140 × 33)
300 300
Basic dynamic load rating [kN]
280 280
260 260
240 240
220 220
200 200
EA Company A Company B Company C EA Company A Company B Company C
(ULTAGE) (ULTAGE)
●C
omparison of other manufacturer’s cataloged ●T
emperature rise test results (circulating oiling)
shaft speeds 22216 (ø80 × ø140 × 33)
22216 (ø80 × ø140 × 33)
5,000 90
ULTAGE EA
Maximum shaft speed [min-1]
Oil Company A
4,000 80
Grease Company B
3,000 70
2,000 60
1,000 50
0 40
0 2000 4000 6000 8000
ULTAGE Company A Company B Company C
EA Shaft speed [min-1]
7
Products for Paper Manufacturing Machinery
Wo
Zo×φdo Bearing Outside Diameter Number of Oil Holes
mm
D1 W33
Wo and d o differ according to the model number. Do not use the oil holes as position
Refer to the catalog bearing size charts. locating holes.
[Allowable Misalignment] ● 0.06 Cr < dynamic equivalent radial load : 0.009 rad (0.5°)
● Dynamic equivalent radial load ≤ 0.06 Cr : 0.035 rad (0.2°)
✽ If the installed misalignment is greater than recommended, there is a risk of roller/cage protrusion and impact to surrounding components.
8
RustGuard Corrosion-Resistant Bearings
Rust problems emerge during equipment shut downs when rolls are stationary in the wet
environments of the Wire Section and Press Section.
ULTAGE bearings support stable production in addition to corrosion-resistant performance.
Machine
stoppage
Typical Examples
Basic Basic
Service Part Number Basic Dimensions Dynamic Static
B Load Rating Load Rating
φD φd mm kN
d D B C Cr Cor
Press rolls MX2-22210EM 50 90 23 − 125 117
φD φd
Wire rolls MX2-22318EMK 90 190 64 − 668 652
Wire rolls MX2-23234EMK 170 310 110 − 1 700 2 070
B
C Wire rolls MX2-6TS3-6E-22336EMK 180 380 126 − 2 420 2 810
Press rolls MX2-22320EMK 100 215 73 − 827 844
Suction press rolls MX2-23056EM 280 420 106 − 2 170 3 150
Suction press rolls MX2-230/850BL1K 850 1 220 272 − 9 750 22 700
φD φd
Wire rolls MX-6314T2LLU 70 150 35 − 104 68
Wire rolls MX50-4T-NA558/552D 60.325 123.825 79.375 63.500 158 216
Wire rolls MX50-4T-NA759/752D 88.900 161.925 104.775 85.725 270 385
9
Products for Paper Manufacturing Machinery
Features
2000
10
Long Operating Life EA Bearings
Case-hardened steel has been specially heat treated by composite carburizing and nitriding
heat treatment. Therefore, the critical bearing surfaces have been strengthened against
surface damage to achieve a dramatic increase in operating life.
Machine
stoppage
Poor lubrication
Typical Examples
Basic Basic
B Service Part Number Basic Dimensions Dynamic Static
Load Rating Load Rating
mm kN
d D B Cr Cor
TS3-EA3-22244EMK 220 400 108 2 210 2 690
TS3-EA3-22322EM 110 240 80 975 972
TS3-EA3-22324EM 120 260 86 1 170 1 280
TS3-EA-23032EMK 160 240 60 748 1 000
φD φd
TS3-EA-23034EMK 170 260 67 914 1 240
Dryer Section
TS3-EA-23038EMK 190 290 75 1 140 1 570
TS3-EA-23040EMK 200 310 82 1 310 1 790
TS3-EA3-23144EMK 220 370 120 2 190 2 940
TS3-EA3-23148EMK 240 400 128 2 510 3 500
TS3-EA-23238EMK 190 340 120 1 990 2 480
11
Products for Paper Manufacturing Machinery
Features
5 times
● Improved bearing strength
Operating life improvement
for lubricant contaminated by Material and fitting stress strength has been improved by combining
foreign material : nitrogen during the proper heat treatment conditions.
(Compared to NTN's standard carburized steel bearings)
Figure 1. Test results of operating life for lubricant contaminated by foreign material
sFatigue strength
Fatigue cracking causes catastrophic bearing failure. Although this form of damage is anticipated under harsh operating conditions,
EA bearings possess a superior fatigue operating life above standard carburized steel bearings as shown in ring rotating fatigue
strength testing and rolling fatigue strength testing by applying a large fitting stress, as shown in tables 1 and 2 respectively.
1.5 times
Bearings L 10 (Hours) × 104 Cycles L 10 Ratio
Fatigue cracking life Standard carburized
improvement : steel bearings 6 670 1
Table 2. Test results of rolling fatigue strength using a large fitting stress
3 times longer
Bearings L 10 (Hours) × 104 Cycles L 10 Ratio
Operating life under Standard carburized
high fitting stress is steel bearings 2 030 1
12
Solid Grease Bearings
sSpot-pack sFull-pack
PE grains
Grease
PE grains
PE grains
Grease
PE grains
Diagram model of
Solid Grease after curring
Deep groove ball Spherical roller bearings
bearings are equipped are full-pack as standard
with spot-pack as
standard
Grease leakage
Poor Bearing
due to water
lubrication damage
penetration
Production
slowdown
Machine
stoppage
13
Products for Paper Manufacturing Machinery
Features
Bearing Specifications
Permissible Operating
Solid Grease (product code) Resin Lubricant Temperature Range
−20~80˚C (−4~194˚F)
General-purpose Solid Ultra high molecular
Li–mineral oil grease max. 60˚C (140˚F) at regular
Grease (LP03) weight polyethylene
operation conditions
● Production range
➊ Deep groove ball bearings are equipped with spot-pack and ZZ shields as standard. Certain bearing
configurations and model numbers listed as standard specification are not available. Contact NTN for
further information.
➋ Dimensions of the needle roller bearings differ for each bearing configuration. Contact NTN for further
information.
Note : Standard bearings are not manufactured from corrosion resistant materials. However, stainless
steel bearings are available. Needle roller bearings Spherical roller bearings
In case of full-pack, in order for the rolling elements to rotate without sliding, at
least approximately 1% of the basic dynamic load rating is required. Contact B
NTN for more information.
Typical examples of Solid Grease bearings for pulp mill bleach plant
Basic Dynamic Basic Static
Part Number Basic Dimensions
Load Rating Load Rating
φD φd
mm kN
d D B Cr Cor
22209EAKD1/LP03 45 85 23 121 113
14
MEGAOHM™ Insulated Bearings
Electrolytic erosion caused by electric current leakage may occur in bearings used
in electrical machinery, such as motors and generators, etc., which shortens the operating life of the bearings.
NTN’s MEGAOHM™ insulated bearings have been developed to prevent electrolytic erosion.
These bearings are available in ceramic or resin types and can be selected to match the application.
MEGAOHM™ insulated bearings possess the following excellent features.
Features
Machine
stoppage
Construction
Outer
Outer ring
ring
Rolling
Matrix Rolling element
element
Retainer Retainer
Insulating layer
Inner Inner
ring ring
Cylindrical roller Deep groove ball Cylindrical roller Deep groove ball
bearings bearings bearings bearings
Operating caution : This bearing has an insulating effect and requires appropriate lubrication conditions.
Check the conditions and location of use. Contact NTN for technical support.
15
Products for Paper Manufacturing Machinery
Bearings with excellent dust and water-resistant triple-lip seals achieve a longer operating life
in dusty and wet environments.
Features
●T he excellent dust and water-resistance ability extends the bearing replacement cycle, so
maintenance costs are reduced.
● Bearing unit covers, which are typically required, are no longer needed , reducing the size of
the bearings.
● Triple-lip seals are suitable for UC configuration bearings, so they are not only usable with the
lubricating method but also compatible with the inserts in standard bearing units. Therefore,
repair and replacement is easily accommodated.
Construction
Triple-lip seal
[Test conditions]
300
Test bearing : UC205D1 Standard type, LLJ (low-torque type),
LLS (high-torque type)
250
Shaft speed : 800 min-1
Load : None (belt tension only)
Number of cycles
200
16
ULTAGE Series
Shaft washer
ptimal curvature
●O
Cage
indow-type pressed steel
●W
cage
Housing washer
ptimal curvature
●O
Roller
arger rollers
●L
aximum number of rollers
●M
Features
70% higher
Basic dynamic
load rating :
Up to (compared to NTN
conventional products)
6 times longer
NTN conventional ULTAGE
Operating life : product
Up to (compared to NTN conventional products)
● Specifications for pressed steel
pocket-type cage
Usage with lubrication by oil and grease has been made
● World’s highest standard maximum possible by using a simplified pressed steel cage-type cage,
shaft speed expanding the usage range.
High shaft speed has been achieved by using a new pressed
steel cage.
● Heat resistant up to 200˚C
20%
Using a special heat treatment as standard, excellent
Up to higher dimensional stability in high-temperature applications yields a
(compared to NTN
conventional products) longer operating life.
17
Products for Paper Manufacturing Machinery
s1 ~ 2° sFr / Fa ≦ 0.55
Fr : Radial load
Fa : Axial load
Alignment angle
with lithium grease (consistency : NLG13), running in has been (Fig. 1-➀)
Housing : Space 100%
completed, operating at 5% of the basic static load rating Coa. ➂
(Fig. 1-➁➂)
If the conditions of use (operating load, rotational speed Fig. 1 : Grease lubrication in the vertical axis
pattern, lubrication condition, etc.) differ for either lubrication
sHorizontal axis
method, the temperature rise of the bearing will also differ.
Housing Grease
Therefore, select a bearing with a sufficient margin of permitted
rotational speed, listed in the catalog. Furthermore, contact
Bearing : S
tatic space 100% packed
NTN if the bearing application will exceed 80% of the maximum
➁ (Fig. 2-➀)
shaft speed listed in the bearing size charts.
Housing : Space on the side of the
bearing washer 100% packed
➀ (Fig. 2-➁)
Fig. 2 : Grease lubrication in the horizontal axis
Conventional Conventional
Housing washer temp. rise [˚C]
product product
40 ULTAGE 40 ULTAGE
30 30
20 20
10 10
500 1000 1500 2000 2500 500 1000 1500 2000 2500
Shaft speed [min-1 / rpm] Shaft speed [min-1]
18
Constant Velocity Joints
Superior performance of constant velocity joints
Balls Balls
Boot Boot
sDOJ/BC couplings
Outer ring
● DOJ ● BC coupling
Outer ring
Cage
Balls
Balls Cage
Inner ring
Inner ring
Boot
Boot
● Extendable inside the joint while under torque load ● No need to center/easy to install
● Max. permitted angle : 68mm to 200mm size : 20° ● Max. permitted angle : 5°
225mm to 625mm size : 8° to 10° ● Extendable inside main body
19
Products for Paper Manufacturing Machinery
Constant velocity joints are completely isokinetic without fluctuation in angular velocity
θ1 1
θ1
θ2
θ2
0.95 NTN’s CVJ
θ1 θ2 0.9
θ1 θ2 0 45 90 135 180 225 270 305 360
BC Coupling
Maximum distance
By substituting with BC couplings... 12 8 12 3 103
Replacement between shafts (mm)
No centering required Outside diameter (mm) 130 140 143 120 134
Improve work efficiency, reduce
maintenance man-hours
Weight (kg) 6.2 7.5 6.9 6.7 8.5
No lubrication required
Boot-sealed to enable operation for Independent installation Not Not Not Not
prolonged periods without lubricating. Possible
and removal possible possible possible possible
BC coupling Absorb vibration No centering or
Maintenance Time required for centering re-lubrication
required
➊ Replacement may not be possible depending on conditions. Check the conditions and location of
use. Contact NTN for technical support.
20
Size Charts
r r ra
φ D φ D1 φ d φ d1 φ D φ D1 φ d φ d1 φd φ Da φ da
Cylindrical bore (Type EM) Cylindrical bore (Type EA) Tapered bore (Type EA)
21
Products for Paper Manufacturing Machinery
Fa Fa
≦ e > e 222 16 EA K D1 C3
Fr Fr
X Y X Y Internal clearance code
Lubricant groove/hole code
1 Y1 0.67 Y2
Bore shape code : K, no code
Static equivalent radial load Bearing type code : EA, EM
Por = Fr + Yo Fa Inside diameter
e , Y1 , Y2 and Yo are obtained from the tables Bearing series (type code + width series code + diameter series code.)
below.
Part Number Installation Dimensions Constant Axial Load Coefficient Weight (Ref.)
kg
Cylindrical Tapered
Cylindrical Bore Tapered Bore ➀
d1 da min Da max D1 ras max e Y1 Y2 YO Bore Bore
22205EAW33 22205EAKW33 30 30 46 46 1 0.34 2.00 2.98 1.96 0.173 0.169
22205EMW33 22205EMKW33 30 30 46 46 1 0.34 2.00 2.98 1.96 0.174 0.171
22206EAW33 22206EAKW33 37 36 56 55 1 0.31 2.15 3.20 2.10 0.278 0.272
22206EMW33 22206EMKW33 37 36 56 55 1 0.31 2.15 3.20 2.10 0.281 0.275
22207EAW33 22207EAKW33 45 42 65 63 1.1 0.31 2.21 3.29 2.16 0.438 0.430
22207EMW33 22207EMKW33 45 42 65 63 1.1 0.31 2.21 3.29 2.16 0.442 0.433
22208EAD1 22208EAKD1 50 47 73 71 1.1 0.27 2.47 3.67 2.41 0.528 0.518
22208EMD1 22208EMKD1 50 47 73 71 1.1 0.27 2.47 3.67 2.41 0.529 0.519
22308EAD1 22308EAKD1 52 49 81 78 1.5 0.36 1.87 2.79 1.83 1.02 1.00
22308EMD1 22308EMKD1 52 49 81 78 1.5 0.36 1.87 2.79 1.83 1.03 1.01
22209EAD1 22209EAKD1 54 52 78 76 1.1 0.26 2.64 3.93 2.58 0.572 0.561
22209EMD1 22209EMKD1 54 52 78 76 1.1 0.26 2.64 3.93 2.58 0.577 0.566
22309EAD1 22309EAKD1 58 54 91 87 1.5 0.36 1.90 2.83 1.86 1.37 1.34
22309EMD1 22309EMKD1 58 54 91 87 1.5 0.36 1.90 2.83 1.86 1.38 1.35
22210EAD1 22210EAKD1 59 57 83 81 1.1 0.24 2.84 4.23 2.78 0.614 0.602
22210EMD1 22210EMKD1 59 57 83 81 1.1 0.24 2.84 4.23 2.78 0.616 0.604
22310EAD1 22310EAKD1 63 61 99 95 2 0.36 1.87 2.79 1.83 1.82 1.79
22310EMD1 22310EMKD1 63 61 99 95 2 0.36 1.87 2.79 1.83 1.84 1.80
22211EAD1 22211EAKD1 66 64 91 90 1.5 0.23 2.95 4.40 2.89 0.830 0.814
22211EMD1 22211EMKD1 66 64 91 90 1.5 0.23 2.95 4.40 2.89 0.827 0.811
22311EAD1 22311EAKD1 68 66 109 104 2 0.36 1.87 2.79 1.83 2.31 2.26
22311EMD1 22311EMKD1 68 66 109 104 2 0.36 1.87 2.79 1.83 2.34 2.29
22212EAD1 22212EAKD1 71 69 101 99 1.5 0.24 2.84 4.23 2.78 1.14 1.12
22212EMD1 22212EMKD1 71 69 101 99 1.5 0.24 2.84 4.23 2.78 1.15 1.13
22312EAD1 22312EAKD1 75 72 118 113 2.1 0.35 1.95 2.90 1.91 2.86 2.80
22312EMD1 22312EMKD1 75 72 118 113 2.1 0.35 1.95 2.90 1.91 2.91 2.85
22213EAD1 22213EAKD1 78 74 111 107 1.5 0.24 2.79 4.15 2.73 1.52 1.49
22213EMD1 22213EMKD1 78 74 111 107 1.5 0.24 2.79 4.15 2.73 1.53 1.50
22313EAD1 22313EAKD1 81 77 128 122 2.1 0.33 2.06 3.06 2.01 3.48 3.41
22313EMD1 22313EMKD1 81 77 128 122 2.1 0.33 2.06 3.06 2.01 3.50 3.43
22214EAD1 22214EAKD1 84 79 116 113 1.5 0.22 3.01 4.48 2.94 1.61 1.58
22214EMD1 22214EMKD1 84 79 116 113 1.5 0.22 3.01 4.48 2.94 1.64 1.60
22314EAD1 22314EAKD1 85 82 138 131 2.1 0.34 2.00 2.98 1.96 4.25 4.16
22314EMD1 22314EMKD1 85 82 138 131 2.1 0.34 2.00 2.98 1.96 4.31 4.22
22215EAD1 22215EAKD1 88 84 121 118 1.5 0.22 3.14 4.67 3.07 1.67 1.64
22215EMD1 22215EMKD1 88 84 121 118 1.5 0.22 3.14 4.67 3.07 1.71 1.67
22315EAD1 22315EAKD1 91 87 148 139 2.1 0.34 2.00 2.98 1.96 5.18 5.07
22315EMD1 22315EMKD1 91 87 148 139 2.1 0.34 2.00 2.98 1.96 5.27 5.16
22216EAD1 22216EAKD1 94 91 129 127 2 0.22 3.14 4.67 3.07 2.09 2.05
22216EMD1 22216EMKD1 94 91 129 127 2 0.22 3.14 4.67 3.07 2.11 2.07
22316EAD1 22316EAKD1 98 92 158 148 2.1 0.34 2.00 2.98 1.96 6.12 5.99
22316EMD1 22316EMKD1 98 92 158 148 2.1 0.34 2.00 2.98 1.96 6.28 6.15
22217EAD1 22217EAKD1 100 96 139 137 2 0.22 3.07 4.57 3.00 2.59 2.54
22217EMD1 22217EMKD1 100 96 139 137 2 0.22 3.07 4.57 3.00 2.67 2.62
22317EAD1 22317EAKD1 107 99 166 157 3 0.32 2.09 3.11 2.04 7.18 7.04
22317EMD1 22317EMKD1 107 99 166 157 3 0.32 2.09 3.11 2.04 7.29 7.15
22
Size Charts
r r
ra X Y X Y
ra
1 Y1 0.67 Y2
Part Number Installation Dimensions Constant Axial Load Coefficient Weight (Ref.)
kg
Cylindrical Tapered
Cylindrical Bore Tapered Bore➀ d1 da min Da max D1 ras max e Y1 Y2 YO Bore Bore
22218EAD1 22218EAKD1 105 101 149 144 2 0.23 2.90 4.31 2.83 3.34 3.27
22218EMD1 22218EMKD1 105 101 149 144 2 0.23 2.90 4.31 2.83 3.43 3.37
23218EMD1 23218EMKD1 104 101 149 141 2 0.30 2.25 3.34 2.20 4.43 4.31
22318EAD1 22318EAKD1 110 104 176 166 3 0.33 2.06 3.06 2.01 8.42 8.25
22318EMD1 22318EMKD1 110 104 176 166 3 0.33 2.06 3.06 2.01 8.53 8.35
22219EAD1 22219EAKD1 110 107 158 153 2.1 0.23 2.95 4.40 2.89 3.98 3.90
22219EMD1 22219EMKD1 110 107 158 153 2.1 0.23 2.95 4.40 2.89 4.06 3.98
22319EAD1 22319EAKD1 120 109 186 174 3 0.32 2.09 3.11 2.04 9.91 9.71
22319EMD1 22319EMKD1 120 109 186 174 3 0.32 2.09 3.11 2.04 10.0 9.82
23120EAD1 23120EAKD1 114 111 154 147 2 0.28 2.39 3.56 2.34 4.37 4.24
23120EMD1 23120EMKD1 114 111 154 147 2 0.28 2.39 3.56 2.34 4.45 4.32
22220EAD1 22220EAKD1 118 112 168 161 2.1 0.24 2.84 4.23 2.78 4.90 4.80
22220EMD1 22220EMKD1 118 112 168 161 2.1 0.24 2.84 4.23 2.78 5.02 4.93
23220EMD1 23220EMKD1 118 112 168 159 2.1 0.31 2.18 3.24 2.13 6.51 6.33
22320EAD1 22320EAKD1 127 114 201 187 3 0.34 1.98 2.94 1.93 12.6 12.3
22320EMD1 22320EMKD1 127 114 201 187 3 0.34 1.98 2.94 1.93 12.9 12.7
23022EAD1 23022EAKD1 123 119 161 155 2 0.23 2.95 4.40 2.89 3.66 3.55
23022EMD1 23022EMKD1 123 119 161 155 2 0.23 2.95 4.40 2.89 3.66 3.55
23122EAD1 23122EAKD1 125 121 169 161 2 0.28 2.43 3.61 2.37 5.66 5.49
23122EMD1 23122EMKD1 125 121 169 161 2 0.28 2.43 3.61 2.37 5.53 5.36
24122EMD1 24122EMK30D1 121 121 169 158 2 0.36 1.90 2.83 1.86 6.75 6.65
22222EAD1 22222EAKD1 130 122 188 179 2.1 0.25 2.69 4.00 2.63 7.10 6.95
22222EMD1 22222EMKD1 130 122 188 179 2.1 0.25 2.69 4.00 2.63 7.30 7.15
23222EMD1 23222EMKD1 130 122 188 176 2.1 0.32 2.12 3.15 2.07 9.41 9.14
22322EAD1 22322EAKD1 139 124 226 209 3 0.32 2.09 3.11 2.04 17.0 16.6
22322EMD1 22322EMKD1 139 124 226 209 3 0.32 2.09 3.11 2.04 17.4 17.1
23024EAD1 23024EAKD1 134 129 171 165 2 0.22 3.14 4.67 3.07 4.02 3.90
23024EMD1 23024EMKD1 134 129 171 165 2 0.22 3.14 4.67 3.07 4.02 3.90
24024EMD1 24024EMK30D1 132 129 171 161 2 0.29 2.32 3.45 2.26 5.28 5.21
23124EAD1 23124EAKD1 138 131 189 179 2 0.28 2.43 3.61 2.37 7.72 7.49
23124EMD1 23124EMKD1 138 131 189 179 2 0.28 2.43 3.61 2.37 7.77 7.54
24124EMD1 24124EMK30D1 136 131 189 173 2 0.37 1.84 2.74 1.80 10.0 9.87
22224EAD1 22224EAKD1 141 132 203 193 2.1 0.25 2.74 4.08 2.68 8.88 8.68
22224EMD1 22224EMKD1 141 132 203 193 2.1 0.25 2.74 4.08 2.68 9.01 8.82
23224EMD1 23224EMKD1 139 132 203 190 2.1 0.32 2.09 3.11 2.04 11.7 11.3
22324EAD1 22324EAKD1 156 134 246 225 3 0.32 2.09 3.11 2.04 22.3 21.9
22324EMD1 22324EMKD1 156 134 246 225 3 0.32 2.09 3.11 2.04 22.7 22.2
23026EAD1 23026EAKD1 145 139 191 183 2 0.22 3.01 4.48 2.94 5.88 5.71
23026EMD1 23026EMKD1 145 139 191 183 2 0.22 3.01 4.48 2.94 5.90 5.73
24026EMD1 24026EMK30D1 143 139 191 178 2 0.31 2.20 3.27 2.15 7.82 7.71
23126EAD1 23126EAKD1 148 141 199 189 2 0.27 2.51 3.74 2.45 8.45 8.19
23126EMD1 23126EMKD1 148 141 199 189 2 0.27 2.51 3.74 2.45 8.51 8.25
24126EMD1 24126EMK30D1 146 141 199 183 2 0.34 1.96 2.92 1.92 10.7 10.5
22226EAD1 22226EAKD1 151 144 216 206 3 0.25 2.69 4.00 2.63 11.0 10.7
22226EMD1 22226EMKD1 151 144 216 206 3 0.25 2.69 4.00 2.63 11.1 10.9
23226EMD1 23226EMKD1 150 144 216 203 3 0.32 2.12 3.15 2.07 13.8 13.4
22326EAD1 22326EAKD1 164 147 263 243 4 0.33 2.06 3.06 2.01 27.2 26.6
22326EMD1 22326EMKD1 164 147 263 243 4 0.33 2.06 3.06 2.01 28.0 27.5
24
Size Charts
r r
φ D φ D1 φ d φ d1 φ D φ D1 φ d φ d1 φd φ Da
Cylindrical bore (Type EM) Cylindrical bore (Type EA) Tapered bore (Type EA)
➀ Items marked ‘K’ indicate bearings with a bore taper ratio of 1/12, and items marked ‘K30’ indicate bearings with a bore taper ratio of 1/30. ➁ Indicates the minimum allowed chamfer dimension r.
25
Products for Paper Manufacturing Machinery
ra ra X Y X Y
1 Y1 0.67 Y2
Part Number Installation Dimensions Constant Axial Load Coefficient Weight (Ref.)
kg
Cylindrical Tapered
Cylindrical Bore Tapered Bore➀ d1 da min Da max D1 ras max e Y1 Y2 YO Bore Bore
23028EAD1 23028EAKD1 155 149 201 193 2 0.22 3.14 4.67 3.07 6.32 6.13
23028EMD1 23028EMKD1 155 149 201 193 2 0.22 3.14 4.67 3.07 6.37 6.18
24028EMD1 24028EMK30D1 153 149 201 188 2 0.28 2.37 3.53 2.32 8.27 8.15
23128EAD1 23128EAKD1 159 152 213 203 2.1 0.26 2.55 3.80 2.50 10.3 9.94
23128EMD1 23128EMKD1 159 152 213 203 2.1 0.26 2.55 3.80 2.50 10.3 10.0
24128EMD1 24128EMK30D1 156 152 213 198 2.1 0.34 1.98 2.94 1.93 12.9 12.8
22228EAD1 22228EAKD1 163 154 236 224 3 0.25 2.74 4.08 2.68 13.9 13.6
22228EMD1 22228EMKD1 163 154 236 224 3 0.25 2.74 4.08 2.68 14.2 13.9
23228EMD1 23228EMKD1 162 154 236 220 3 0.33 2.06 3.06 2.01 18.2 17.7
22328EAD1 22328EAKD1 181 157 283 261 4 0.33 2.03 3.02 1.98 34.4 33.7
22328EMD1 22328EMKD1 181 157 283 261 4 0.33 2.03 3.02 1.98 35.4 34.7
23030EAD1 23030EAKD1 167 161 214 207 2.1 0.21 3.20 4.77 3.13 7.68 7.45
23030EMD1 23030EMKD1 167 161 214 207 2.1 0.21 3.20 4.77 3.13 7.73 7.50
24030EMD1 24030EMK30D1 165 161 214 202 2.1 0.29 2.32 3.45 2.26 10.4 10.3
23130EAD1 23130EAKD1 171 162 238 223 2.1 0.29 2.35 3.50 2.30 15.7 15.2
23130EMD1 23130EMKD1 171 162 238 223 2.1 0.29 2.35 3.50 2.30 15.8 15.3
24130EMD1 24130EMK30D1 168 162 238 216 2.1 0.36 1.85 2.76 1.81 19.7 19.4
22230EAD1 22230EAKD1 177 164 256 242 3 0.25 2.74 4.08 2.68 17.6 17.3
22230EMD1 22230EMKD1 177 164 256 242 3 0.25 2.74 4.08 2.68 18.0 17.7
23230EMD1 23230EMKD1 174 164 256 237 3 0.33 2.03 3.02 1.98 23.6 22.9
22330EMD1 22330EMKD1 188 167 303 279 4 0.34 2.00 2.98 1.96 42.2 41.3
23932EMD1 23932EMKD1 175 169 211 205 2 0.17 3.90 5.81 3.81 5.09 4.94
23032EAD1 23032EAKD1 177 171 229 221 2.1 0.21 3.20 4.77 3.13 9.32 9.03
23032EMD1 23032EMKD1 177 171 229 221 2.1 0.21 3.20 4.77 3.13 9.37 9.09
24032EMD1 24032EMK30D1 175 171 229 215 2.1 0.29 2.32 3.45 2.26 12.6 12.4
23132EAD1 23132EAKD1 185 172 258 240 2.1 0.29 2.35 3.50 2.30 20.1 19.5
23132EMD1 23132EMKD1 185 172 258 240 2.1 0.29 2.35 3.50 2.30 20.2 19.6
24132EMD1 24132EMK30D1 181 172 258 232 2.1 0.37 1.83 2.72 1.79 25.4 25.1
22232EAD1 22232EAKD1 190 174 276 260 3 0.25 2.69 4.00 2.63 22.3 21.8
22232EMD1 22232EMKD1 190 174 276 260 3 0.25 2.69 4.00 2.63 22.9 22.4
23232EMD1 23232EMKD1 187 174 276 254 3 0.33 2.03 3.02 1.98 29.6 28.8
22332EMD1 22332EMKD1 205 177 323 296 4 0.33 2.03 3.02 1.98 50.5 49.5
23934EMD1 23934EMKD1 185 179 221 215 2 0.16 4.11 6.12 4.02 5.39 5.23
23034EAD1 23034EAKD1 190 181 249 238 2.1 0.22 3.07 4.57 3.00 12.7 12.3
23034EMD1 23034EMKD1 190 181 249 238 2.1 0.22 3.07 4.57 3.00 12.8 12.4
24034EMD1 24034EMK30D1 186 181 249 231 2.1 0.30 2.23 3.32 2.18 17.2 16.9
23134EAD1 23134EAKD1 195 182 268 250 2.1 0.28 2.39 3.56 2.34 21.5 20.9
23134EMD1 23134EMKD1 195 182 268 250 2.1 0.28 2.39 3.56 2.34 21.6 20.9
24134EMD1 24134EMK30D1 193 182 268 243 2.1 0.35 1.91 2.85 1.87 26.7 26.3
22234EMD1 22234EMKD1 201 187 293 277 4 0.26 2.60 3.87 2.54 28.3 27.7
23234EMD1 23234EMKD1 199 187 293 272 4 0.33 2.03 3.02 1.98 35.8 34.8
22334EMD1 22334EMKD1 223 187 343 313 4 0.32 2.09 3.11 2.04 60.3 59.1
26
Size Charts
r r
φ D φ D1 φ d φ d1 φ D φ D1 φ d φ d1 φd φ Da
Cylindrical bore (Type EM) Cylindrical bore (Type EA) Tapered bore (Type EA)
➀ Items marked ‘K’ indicate bearings with a bore taper ratio of 1/12, and items marked ‘K30’ indicate bearings with a bore taper ratio of 1/30. ➁ Indicates the minimum allowed chamfer dimension r.
27
Products for Paper Manufacturing Machinery
ra ra X Y X Y
1 Y1 0.67 Y2
Part Number Installation Dimensions Constant Axial Load Coefficient Weight (Ref.)
kg
Cylindrical Tapered
Cylindrical Bore Tapered Bore➀ d1 da min Da max D1 r as max e Y1 Y2 YO Bore Bore
23936EMD1 23936EMKD1 199 189 241 232 2 0.17 3.90 5.81 3.81 7.79 7.56
23036EAD1 23036EAKD1 201 191 269 255 2.1 0.23 2.95 4.40 2.89 16.8 16.3
23036EMD1 23036EMKD1 201 191 269 255 2.1 0.23 2.95 4.40 2.89 16.9 16.4
24036EMD1 24036EMK30D1 199 191 269 248 2.1 0.31 2.15 3.20 2.10 22.8 22.4
23136EAD1 23136EAKD1 205 194 286 267 3 0.29 2.32 3.45 2.26 27.2 26.4
23136EMD1 23136EMKD1 205 194 286 267 3 0.29 2.32 3.45 2.26 27.4 26.5
24136EMD1 24136EMK30D1 202 194 286 259 3 0.36 1.87 2.79 1.83 33.5 33.0
22236EMD1 22236EMKD1 209 197 303 287 4 0.25 2.74 4.08 2.68 29.3 28.7
23236EMD1 23236EMKD1 210 197 303 282 4 0.33 2.06 3.06 2.01 38.2 37.1
22336EMD1 22336EMKD1 229 197 363 329 4 0.32 2.09 3.11 2.04 70.2 68.7
23938EMD1 23938EMKD1 209 199 251 243 2 0.17 4.05 6.04 3.96 8.20 7.96
23038EAD1 23038EAKD1 213 201 279 266 2.1 0.22 3.01 4.48 2.94 17.8 17.3
23038EMD1 23038EMKD1 213 201 279 266 2.1 0.22 3.01 4.48 2.94 17.9 17.4
24038EMD1 24038EMK30D1 209 201 279 258 2.1 0.30 2.23 3.32 2.18 23.8 23.4
23138EMD1 23138EMKD1 221 204 306 284 3 0.29 2.32 3.45 2.26 34.3 33.2
24138EMD1 24138EMK30D1 216 204 306 275 3 0.37 1.84 2.74 1.80 42.1 41.5
22238EMD1 22238EMKD1 222 207 323 305 4 0.25 2.74 4.08 2.68 35.6 34.9
23238EMD1 23238EMKD1 220 207 323 299 4 0.33 2.03 3.02 1.98 46.1 44.7
22338EMD1 22338EMKD1 247 210 380 346 5 0.32 2.12 3.15 2.07 81.5 79.9
23940EMD1 23940EMKD1 221 211 269 260 2.1 0.18 3.76 5.59 3.67 12.0 11.6
23040EMD1 23040EMKD1 223 211 299 283 2.1 0.23 2.95 4.40 2.89 22.8 22.1
24040EMD1 24040EMK30D1 221 211 299 275 2.1 0.31 2.18 3.24 2.13 30.2 29.7
23140EMD1 23140EMKD1 231 214 326 301 3 0.30 2.25 3.34 2.20 41.9 40.6
24140EMD1 24140EMK30D1 224 214 326 291 3 0.39 1.74 2.59 1.70 51.5 50.7
22240EMD1 22240EMKD1 234 217 343 323 4 0.25 2.74 4.08 2.68 42.7 41.8
23240EMD1 23240EMKD1 232 217 343 315 4 0.34 1.98 2.94 1.93 55.2 53.6
22340EMD1 22340EMKD1 265 220 400 364 5 0.31 2.15 3.20 2.10 94.6 92.7
23944EMD1 23944EMKD1 241 231 289 280 2.1 0.17 4.05 6.04 3.96 12.5 12.1
23044EMD1 23044EMKD1 246 233 327 310 3 0.23 2.95 4.40 2.89 29.9 29.1
24044EMD1 24044EMK30D1 243 233 327 302 3 0.31 2.20 3.27 2.15 39.2 38.6
23144EMD1 23144EMKD1 252 237 353 328 4 0.30 2.28 3.39 2.23 52.3 50.7
24144EMD1 24144EMK30D1 247 237 353 317 4 0.38 1.78 2.65 1.74 65.2 64.3
22244EMD1 22244EMKD1 264 237 383 358 4 0.25 2.74 4.08 2.68 59.6 58.4
23244EMD1 23244EMKD1 261 237 383 349 4 0.34 2.00 2.98 1.96 79.4 77.1
23948EMD1 23948EMKD1 262 251 309 301 2.1 0.15 4.40 6.56 4.31 13.5 13.1
23048EMD1 23048EMKD1 267 253 347 329 3 0.22 3.07 4.57 3.00 32.0 31.7
24048EMD1 24048EMK30D1 264 253 347 322 3 0.28 2.37 3.53 2.32 42.2 41.6
23148EMD1 23148EMKD1 276 257 383 356 4 0.29 2.32 3.45 2.26 65.1 63.1
24148EMD1 24148EMK30D1 270 257 383 344 4 0.37 1.82 2.70 1.78 81.0 79.8
23952EMD1 23952EMKD1 292 271 349 335 2.1 0.17 3.90 5.81 3.81 23.9 23.1
23052EMD1 23052EMKD1 291 275 385 366 4 0.23 2.95 4.40 2.89 47.8 46.3
24052EMD1 24052EMK30D1 286 275 385 354 4 0.31 2.16 3.22 2.12 63.6 62.6
23956EMD1 23956EMKD1 310 291 369 356 2.1 0.16 4.16 6.20 4.07 25.2 24.4
23056EMD1 23056EMKD1 310 295 405 386 4 0.22 3.07 4.57 3.00 51.3 49.7
24056EMD1 24056EMK30D1 306 295 405 376 4 0.29 2.30 3.42 2.25 67.3 66.3
28
Size Charts
Bearing Number
WA 222 20 EA LLS K D1 C3
Internal clearance code
Internal clearance code – D1 : oil groove w/oil hole (Japan manufacturing spec.) ;
W33 : oil groove w/oil hole (Europe manufacturing spec.)
Bore shape code – no code : inside diameter cylindrical bore ;
K : tapered bore
Dual-side contact seal
Bearing type code – EA : pressed steel pocket-type retainer
Inside diameter
Bearing series (type code + width series code + diameter series code.)
Bearings with width dimensions different to standard sizes
d D B r s min ➁
Wo do Cr Cor Cr Cor Cylindrical Bore Tapered Bore➀
➀ Indicates bearings with a bore taper ratio of 1/12. ➁ Indicates the minimum allowed chamfer dimension r.
1. Because the internal radial clearance of "ULTAGE Series Sealed 3. Please use Lithium mineral grease. In case other types of
Spherical Roller Bearings" with tapered bores cannot be grease are to be used, please consult NTN.
measured with a thickness gauge, please monitor clearances 4. If a shrink fit is to be applied, please do not exceed a bearing
by measuring the axial movement of the inner ring as shown temperature of 100˚C. However, these bearing cannot be
in Table 1. shrink fit via immersion in a hot oil bath.
2. During assembly, if misalignment exceeding the allowable
misalignment angle of ± 0.5 ˚ is applied to the bearing,
rollers may come in direct contact with seals causing seal
deformation. Furthermore, if additional force is applied under
these conditions, seals may separate from the bearing entirely.
Therefore, caution is advised.
29
Products for Paper Manufacturing Machinery
φDa
φDa
Por = Fr + Yo Fa
φda
φda
φD1
φD1
φd1
φd1
φD
φD
φd
φd
φd
φd
e , Y1 , Y2 and Yo are obtained from
Cylindrical bore Cylindrical bore
Tapered bore Tapered bore the tables below.
Installation Dimensions Constant Axial Load Coefficient Weight (Ref.) Grease Pack Amount (Ref.)
kg g
Cylindrical Tapered
d1 da min Da max D1 r as max e Y1 Y2 YO Bore Bore
29 29 47 47 1 0.34 2.00 2.98 1.96 0.19 — 1.4 ~ 2.4
70 69 102 102 1.5 0.24 2.84 4.23 2.78 1.25 1.22 6.6 ~ 11.0
76 74 111 110 1.5 0.24 2.79 4.15 2.73 1.72 1.67 8.5 ~ 14.2
82 79 116 116 1.5 0.22 3.01 4.48 2.94 1.78 1.73 9.6 ~ 16.0
86 84 121 121 1.5 0.22 3.14 4.67 3.07 1.88 1.83 9.9 ~ 16.4
93 91 131 131 2 0.22 3.14 4.67 3.07 2.32 2.27 12.2 ~ 20.3
98 96 140 140 2 0.22 3.07 4.57 3.00 2.90 2.83 16.9 ~ 28.1
103 101 149 147 2 0.23 2.90 4.31 2.83 3.68 3.59 20.4 ~ 34.1
115 112 168 165 2.1 0.24 2.84 4.23 2.78 5.40 5.25 28.8 ~ 48.0
127 122 188 183 2.1 0.25 2.69 4.00 2.63 7.79 7.58 41.6 ~ 69.3
138 132 203 197 2.1 0.25 2.74 4.08 2.68 9.76 9.48 52.8 ~ 88.0
148 144 216 211 3 0.25 2.69 4.00 2.63 11.9 11.6 62.6 ~ 104.4
Equal to or
Greater Than Min. Max. Min. Max. CN C3 C4
Less Than
24 30 0.010 0.015 0.15 0.20 0.015 0.025 0.040
30
Size Charts
Bearing Number
G C
Ca
2 × ds (120˚ )
UC 3 05 D1 LLJ
Inside diameter d4 d
S1 S
B
Basic Basic
Shaft Bearing
Part Number Dimensions Dynamic Static Coefficient
Diameter Weight
Load Rating Load Rating
mm mm kN kN kg
d D B C r s min ➀
S S1 G ds Ca d4 Cr Cor fo (Ref.)
12 UC201D1LLJ 12 47 31 17 0.6 12.7 18.3 4.5 M 5 × 0.8 3.8 29.6 12.8 6.65 13.2 0.21
15 UC202D1LLJ 15 47 31 17 0.6 12.7 18.3 4.5 M 5 × 0.8 3.8 29.6 12.8 6.65 13.2 0.20
17 UC203D1LLJ 17 47 31 17 0.6 12.7 18.3 4.5 M 5 × 0.8 3.8 29.6 12.8 6.65 13.2 0.18
20 UC204D1LLJ 20 47 31 17 1 12.7 18.3 4.5 M 5 × 0.8 3.8 29.6 12.8 6.65 13.2 0.17
25 UC205D1LLJ 25 52 34.1 17 1 14.3 19.8 5 M 5 × 0.8 4 33.9 14.0 7.85 13.9 0.20
30 UC206D1LLJ 30 62 38.1 19 1 15.9 22.2 5 M 6 × 0.75 4.9 40.8 19.5 11.3 13.8 0.32
35 UC207D1LLJ 35 72 42.9 20 1.5 17.5 25.4 6 M 6 × 0.75 5.4 46.8 25.7 15.3 13.8 0.46
45 UC209D1LLJ 45 85 49.2 22 1.5 19 30.2 8 M 8×1 6.1 57.5 32.5 20.4 14.1 0.68
50 UC210D1LLJ 50 90 51.6 24 1.5 19 32.6 9 M 8×1 6.1 62.4 35.0 23.2 14.4 0.78
55 UC211D1LLJ 55 100 55.6 25 2 22.2 33.4 9 M 8×1 6.5 69 43.5 29.2 14.3 1.04
60 UC212D1LLJ 60 110 65.1 27 2 25.4 39.7 10 M10 × 1.25 7.3 77 52.5 36.0 14.3 1.46
65 UC213D1LLJ 65 120 65.1 32 2 25.4 39.7 10 M10 × 1.25 7.3 82.5 57.5 40.0 14.4 1.86
70 UC214D1LLJ 70 125 74.6 33 2 30.2 44.4 12 M10 × 1.25 7.7 87 62.0 44.0 14.5 2.10
75 UC215D1LLJ 75 130 77.8 34 2 33.3 44.5 12 M10 × 1.25 8 93 66.0 49.5 14.7 2.34
80 UC216D1LLJ 80 140 82.6 35 2.5 33.3 49.3 12 M10 × 1.25 8 98.1 72.5 53.0 14.6 2.78
85 UC217D1LLJ 85 150 85.7 36 2.5 34.1 51.6 12 M12 × 1.5 7.9 106.4 83.5 64.0 14.7 3.54
90 UC218D1LLJ 90 160 96 37 2.5 39.7 56.3 12 M12 × 1.5 8.7 111.6 96.0 71.5 14.5 4.40
31
Products for Paper Manufacturing Machinery
G C
Ca
2 × ds (120˚ )
r
SφD
d4 d
Triple-Lip seal
S1 S
B
Basic Basic
Shaft Bearing
Part Number Dimensions Dynamic Static Coefficient
Diameter Weight
Load Rating Load Rating
mm mm kN kN kg
d D B C r s min ➀
S S1 G ds Ca d4 Cr Cor fo (Ref.)
45 UC309D1LLJ 45 100 57 29 2 22 35 10 M10 × 1.25 7.1 63.5 53.0 32.0 13.1 1.28
50 UC310D1LLJ 50 110 61 32 2.5 22 39 12 M12 × 1.5 7.9 70.6 62.0 38.5 13.2 1.68
55 UC311D1LLJ 55 120 66 34 2.5 25 41 12 M12 × 1.5 8.5 76.6 71.5 45.0 13.2 2.08
60 UC312D1LLJ 60 130 71 36 2.5 26 45 12 M12 × 1.5 9 82.7 82.0 52.0 13.2 2.62
65 UC313D1LLJ 65 140 75 39 2.5 30 45 12 M12 × 1.5 9.4 88.2 92.5 60.0 13.2 3.22
70 UC314D1LLJ 70 150 78 41 2.5 33 45 12 M12 × 1.5 10 94.8 104 68.0 13.2 3.86
75 UC315D1LLJ 75 160 82 43 2.5 32 50 14 M14 × 1.5 10.5 101.3 113 77.0 13.2 4.70
80 UC316D1LLJ 80 170 86 45 2.5 34 52 14 M14 × 1.5 11.1 107.9 123 86.5 13.3 5.60
85 UC317D1LLJ 85 180 96 47 3 40 56 16 M16 × 1.5 11.5 114.4 133 97.0 13.3 6.70
90 UC318D1LLJ 90 190 96 49 3 40 56 16 M16 × 1.5 12.2 120.9 143 107 13.3 7.60
95 UC319D1LLJ 95 200 103 51 3 41 62 16 M16 × 1.5 12.7 127.5 153 119 13.3 8.70
100 UC320D1LLJ 100 215 108 55 3 42 66 18 M18 × 1.5 14 135.6 173 141 13.2 10.8
32
Size Charts
Bearing Number
φd1
294 20 E
φd A
Bearing type code r
Inside diameter B1
B2 T
Bearing series (type code + height series code + diameter series code.) C
r
φD1
φD
29416E 80 170 54 2.1 788 1 690 80 400 173 000 2 350 1 250
29417E 85 180 58 2.1 820 1 860 83 600 190 000 2 200 1 170
29418E 90 190 60 2.1 934 2 050 95 200 209 000 2 100 1 110
29420E 100 210 67 3 1 170 2 570 119 000 262 000 1 850 1 000
29422E 110 230 73 3 1 380 3 100 141 000 316 000 1 700 900
29424E 120 250 78 4 1 520 3 550 155 000 362 000 1 550 830
29426E 130 270 85 4 1 770 4 270 181 000 435 000 1 450 760
29428E 140 280 85 4 1 850 4 350 188 000 443 000 1 400 710
29430E 150 300 90 4 2 200 5 270 225 000 537 000 1 300 660
29432E 160 320 95 5 2 410 5 790 246 000 590 000 1 200 620
33
Products for Paper Manufacturing Machinery
φda
Dynamic equivalent axial load
Pa = Fa + 1.2Fr
φDa φdb2
44 58.9 32 62 181 150 107 114 141 175 2.5 10.3 340
48.5 65 35 69 199 165 118 125 156 190 2.5 13.1 439
52.7 71 35.9 74 218 180 128 135 171 205 3 16.7 563
58.5 74 39.6 81 238 195 138 146 180 225 3 21.4 695
60.5 81 43.2 92 264 220 158 168 204 250 3 27.4 838
63 84.9 45.5 99 280 230 170 182 221 265 4 32.5 1 050
34
Bearing Inspection and Maintenance
● Bearing inspection and maintenance ➀ Inspect the bearings while the equipment is
operating
Performing periodic inspections and maintenance
Check the temperature, sound, and vibration of
of the bearings makes it possible to maintain the
the bearings. Examine the characteristics of the
original performance of the bearing for a long time,
lubricant and determine the cycle for refilling or
and also detect any early-stage bearing anomalies.
replacing the lubricant.
Therefore, inspections and maintenance can
increase productivity and economic efficiency by
➁ Visually monitor the bearings
preventing bearing failures before they occur.
Carefully monitor any visible problems that appear
when carrying out periodic inspections after the
The inspection items on the right are generally
bearings have been in use. If there are visible signs
accepted methods for bearing maintenance and
of damage, take measures to prevent recurrence.
care. Depending on the importance of the system
or machinery being used, implementing periodic
✽Bearing Damage – Typical Examples & Causes
inspection cycles is an important aspect of bearing
Refer to the related catalog : Care and Maintenance
maintenance and management.
of Bearings (Cat. No. 3017) for more details.
Figure 3 shows the method for measuring the radial spherical roller bearing using an adapter sleeve.
internal clearance of a spherical roller bearing by
inserting a feeler
gauge (thickness
gauge) in between
(c) Installing using
the rollers and the a withdrawal sleeve
35
Products for Paper Manufacturing Machinery
Table 1. Tapered bore spherical roller bearing installation specifications – Type EA/EM Units : mm
Bearing
Radial Internal Clearance (Pre-Installation) Radial Internal Axial Movement Amount (ref.)
Inside Diameter Minimum Residual Radial
Clearance
Internal Clearance
d CN C3 C4 Reduction 1/12 Taper Ratio 1/30
Equal to
Greater
or Less Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. CN C3 C4
Than
Than
24 30 0.030 0.040 0.040 0.055 0.055 0.075 0.010 0.015 0.15 0.20 — — 0.015 0.025 0.040
30 40 0.035 0.050 0.050 0.065 0.065 0.085 0.015 0.020 0.25 0.30 — — 0.015 0.030 0.045
40 50 0.045 0.060 0.060 0.080 0.080 0.100 0.020 0.025 0.35 0.40 — — 0.020 0.035 0.055
50 65 0.055 0.075 0.075 0.095 0.095 0.120 0.025 0.030 0.40 0.45 — — 0.025 0.045 0.065
65 80 0.070 0.095 0.095 0.120 0.120 0.150 0.035 0.040 0.50 0.60 — — 0.030 0.055 0.080
80 100 0.080 0.110 0.110 0.140 0.140 0.180 0.040 0.050 0.60 0.70 — — 0.030 0.060 0.090
100 120 0.100 0.135 0.135 0.170 0.170 0.220 0.055 0.065 0.80 0.90 1.80 2.30 0.035 0.070 0.105
120 140 0.120 0.160 0.160 0.200 0.200 0.260 0.065 0.075 0.90 1.00 1.95 2.70 0.045 0.085 0.125
140 160 0.130 0.180 0.180 0.230 0.230 0.300 0.075 0.090 1.00 1.20 2.35 3.10 0.040 0.090 0.140
160 180 0.140 0.200 0.200 0.260 0.260 0.340 0.080 0.100 1.10 1.40 2.80 3.55 0.040 0.100 0.160
180 200 0.160 0.220 0.220 0.290 0.290 0.370 0.090 0.110 1.20 1.50 3.20 3.95 0.050 0.110 0.180
200 225 0.180 0.250 0.250 0.320 0.320 0.410 0.110 0.130 1.50 1.80 3.85 4.60 0.050 0.120 0.190
225 250 0.200 0.270 0.270 0.350 0.350 0.450 0.120 0.140 1.60 1.90 4.20 4.95 0.060 0.130 0.210
250 280 0.220 0.300 0.300 0.390 0.390 0.490 0.130 0.160 1.60 2.10 4.25 5.40 0.060 0.140 0.230
Note 1 : Applies to solid shaft normal, C3 and C4 clearances
Note 2 : For type 213, refer to the related Ball and Roller Bearings catalog (Cat. No. 2202).
Note 3 : When clearance C2 and P r are > 0.15 C r, a separate evaluation is required. Contact NTN for more information.
Reference formula
2 × 80 + 140
= = 100 mm
3
Note : For open type bearings, measure the clearances by using a feeler gauge.
36
Bearing Damage – Typical Examples & Causes
Creep
The inside or outside diameter surface becomes a mirror
or cloudy.
[Service]
Press Section
Cause
Insufficient interference fit
Correction
Investigate the interference fit
[Service]
Dryer Section
Cause
Excessive inner ring interference stress, thermal shock, impact,
fatigue, poor fitting form
Correction
Investigate the interference fit
Use long operating life EA bearings
✽ See page 11
Rust
Rust and corrosion occur on surfaces of raceways and
rolling elements.
[Service]
Wire Section, Press Section
Cause
Water penetration, condensation, handling with bare hands
Correction
Improve seal performance
Take measures to prevent bearing corrosion during prolonged downtime
Utilization of RustGuard Corrosion-Resistant Bearings
✽ See pages 9-10
37
Products for Paper Manufacturing Machinery
Flaking (Delamination)
The raceway surface peels away in scale-like flakes.
[Service]
Wire Section, Press Section, Dryer Section
Cause
Excessive load, foreign material penetration
Correction
Change to bearings with a larger load capacity
Use of lubricant with a high viscosity
Smearing
Roughening of the raceway surface with minute weld deposits.
[Service]
Calender Stack
Cause
Poor lubricant performance for the rotating motion of the roller elements
Correction
Prevent sliding
(reduce the radial internal clearance, consider precompression).
Use of lubricant with a high viscosity
Use long operating life EA bearings
✽ See pages 11-12
Electrolytic Erosion
Fluting formed by small surface pits across the raceways.
[Service]
Electric Motors
Cause
Raceway surface melting due to electric current conduction and
sparking inside the bearing
Correction
Discharge the current via a slip ring, etc.
Use MEGAOHM™ Insulated Bearings
✽ See page 15
38