Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Remote Control 2-Way Motorcycle Alarm System (AL-630)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

REMOTE CONTROL

2-WAY MOTORCYCLE ALARM SYSTEM


[ AL-630 ]
2-Way Motorcycle alar m system

Function Key Shocking alarm


Locate motor
Disarm/Iginition off
Arm/Anti-robbery
Arm: Remote start/open light
Shocking alarm Illegally starting alarm
Disarm: Keyboard lock
Locate motor: Sending signal

Remote Start Engine: Illegally starting alarm Disarm


Arm
Assistant function Battery
Function Operation

1. Arm/Mute arm: Press the button once, the siren will beep once , the alarm system is in
ARM mode. If move the motorcycle or ignition on, the siren will sound and the direction lights will
flash, the engine will be locked at the same time. And the remote controller will beep and show
icons in LCD display. Press any button, the icons will be removed.
2. Disarm: Press the button once, the siren will give 2 beeps, the direction lights would flash
twice, the motorcycle is in the DISARM status.
3. Locate motor: Press the button once, the direction light will flash 8 times, the siren will beep
8 times, and you can know where your motorcycle is.
4. Remote Start Engine: Press the button twice within 3s to start the engine. Press on the
button for 3.5s, turn on the background light. After starting the engine by remote controller, the
engine will be on until you stop it by remote controller. You can drive the motorcycle without using
the key, so make sure no other people can get access to you motorcycle when using this function.
5. Adjust Sensitivity: Adjust the sensitivity on the mainframe by hand, turn clockwise to increase
sensitivity, turn anti-clockwise to decrease sensitivity. The sensitivity has been adjusted well when
leaving factory.
6. Remote Cut off Engine: When the engine is running, press the button once to stop the engine.
(Please kindly note that remote starting engine is to remote cutting off engine.)
7. Anti-robbery and assistance: When the motorcycle is robbed and driven away, the owner-
driver can stop it by pressing the button once, the siren will sound urgently and the direction
lights will flash at the same time.
8. Code Learning: In disarm mode, put the motorcycle key in the key lock and turn it from ACC
OFF to ACC ON, 3 times in 3s, when the lights flash and the siren beeps once, press any button on
the remote controller within 10s, the direction lights will flash once, it means the system learn the
Code of the remote controller. The other remote controller can be learnt code in the same way.
( The code has been learnt well before leaving factory, the user need not learn it again if
unnecessary.)
Remark: one mainframe could learn at most two remote controllers once.
9. Keyboard lock : Press the buttons and at the same time and hold for 3.5 s to lock
keyboard ; press these two buttons for 3.5s again to unlock the keyboard.
Anti-theft main engine and common vehicle distribution wire
function contrast form

Mainframe HONDA SANYANG YAMAHA SUZUKI


Vehicle Wire
Wire Color Wire Color Wire Color Wire Color Wire Color
12v(+) Red Red Red Red Red
12v(-) Black Green Green Black Black/White

Key on+12v Orange Black Black Brown Orange

Start Wire Blue Yellow/Red Yellow/Red Blue/White Black/White


Ignition off Black and Black and Black and
Pink
(Up) White(Up) White(Up) White(Up)
Black and Black and Black and (Remark1)
Ignition off Gray White White White
(Dowm)
(Down) (Down) (Down)
Direction
Yellow Lighte Blue Light Blue Deep Brown Black
Light
Direction
Yellow Orange Orange Deep Green Green
Light

(Hanging straightly)

Turn off wire

You might also like