Sys Admin Guide en PDF

Office Printers
Phaser® 6300/6350 color laser printer

Phaser® 8500/8550 color printer
System
Administrator
Guide
www.xerox.com/office/support
Copyright © 2005 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United
States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation.
Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory
or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are
displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
XEROX®, The Document Company®, the digital X®, CentreWare®, Phaser®, PhaserShare®, PhaserSMART®, and Walk-Up™
are trademarks of Xerox Corporation in the United States and/or other countries.
Adobe® and PostScript® are trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Apple®, AppleTalk®, Bonjour™, EtherTalk®, Macintosh®, and Mac OS® are trademarks of Apple Computer, Inc. in the United
States and/or other countries.
PCL® is a trademark of Hewlett-Packard Corporation in the United States and/or other countries.
Windows®, Windows NT®, and Windows Server™ are trademarks of Microsoft Corporation in the United States and/or other
countries.
SunSM, Sun Microsystems™, and Solaris® are trademarks of Sun Microsystems, Incorporated in the United States and/or other
countries.
UNIX® is a trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.
Contents
1 Overview
Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
PrintingScout Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
PhaserSMART Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Using PrintingScout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Using the Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Using CentreWare IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Using a Windows Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Using the Xerox Support Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Xerox Support Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
2 Network Installation Features

Using a Startup Network Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
About the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Configuration File Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Specifying the Location of the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Printer Driver Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Walk-Up Printing Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Walk-Up Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Installation from the Printer’s Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Auto-Configuring Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Discovery Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Multicast DNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Service Location Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
3 Network Administration Features

Printer Neighborhood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Setting Up Usage Profile Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Sending Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Xerox Usage Analysis Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
System Administrator Guide

i
Contents
Protocol Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

HTTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
TCP/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Port 9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
IPP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Email Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
MaiLinX Remote Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
MaiLinX Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
EtherTalk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Cloning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
4 Security Features
Basic Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
About Admin and Key User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
About HTTP, HTTPS, and SSL/TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
About Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
About Access Control Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Securing the Printer in a High Security Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting Up a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Configuring SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Configuring Administrator and Key User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Configuring the Print Host Access List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Securing the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Selecting the Hard Drive Overwrite Security Option . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option. . . . 4-11
Locking the Control Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Configuring SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Configuring SNMP for Maximum Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Configuring SNMP v1/v2c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Configuring SNMP v3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Configuring the SNMP Access Control List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Disabling SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

ii
Contents
5 Printing Features
Secure, Personal, Proof, and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Specifying Secure, Personal, Proof, and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . 5-3
Printing or Deleting Secure Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Printing or Deleting Personal Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Printing or Deleting Proof and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Smart Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Jam Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Paper Tips Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
6 Glossary
Terms and Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
A Configuration Card Parameters

General Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
PostScript Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
PCL Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
USB 2.0 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Hard Drive Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Network Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

PhaserShare Series B Interface for Ethernet Network Parameters . . . . . . . . . . . . . . . . . . . . A-3
EtherTalk Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
TCP/IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
DNS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
SLP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
SSDP Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
NBNS (WINS) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Access Control Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
LPR Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
AppSocket (Port 9100) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
IPP (Internet Printing Protocol) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

iii
Contents
SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
HTTP (CentreWare IS) Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

FTP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Status Notification Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
MaiLinX Remote Printing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7
B Printer Commands
Phaser 6300/6350 PCL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Media Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Media Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Input Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
Phaser 8500/8550 PCL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Media Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
Media Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
Input Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7
Phaser PJL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8
C Acknowledgements
Index

iv
Overview
This section includes:

■ Resources on page 1-1
■ PrintingScout Alerts on page 1-2
■ PhaserSMART Technical Support on page 1-2
■ Xerox Support Centre on page 1-4
You can obtain information regarding your printer and its capabilities from the following
sources.
Resources
Information Source
Setup Guide* Packaged with printer

Quick Reference Guide* Packaged with printer
User Guide (PDF)* Software and Documentation CD-ROM
Advanced Features Guide (PDF) www.xerox.com/office/support
Videos www.xerox.com/office/support
Printer Management Tools www.xerox.com/office/pmtools
Knowledge Base www.xerox.com/office/support
PhaserSMART Technical Support. For more www.phaserSMART.com

information, see PhaserSMART Technical Support
on page 1-2.
Technical Support www.xerox.com/office/support
Information about menu selection or error Control panel Help (?) button
messages on the control panel
Information pages Control panel menu
* Also available on the Support website.

1-1
PrintingScout Alerts
PrintingScout Alerts
PrintingScout is an automated tool that is installed with the Xerox printer driver. It
automatically checks the printer status when a print job is sent. If the printer is unable to print
a job, PrintingScout automatically displays an alert on the user’s computer screen to let them
know that the printer needs attention. The user can click the alert to view instructions
explaining how to fix the problem. PrintingScout provides real-time support to users, while
eliminating many of the help calls requesting printer support. PrintScouting saves you time for
more critical tasks.
PhaserSMART Technical Support

PhaserSMART Technical Support is an automated, internet-based support system that uses the
user’s default web browser to send diagnostic information from their printer to the Xerox
website for analysis. PhaserSMART Technical Support examines the information, diagnoses
the problem, and proposes a solution. If the problem is not resolved with the solution,
PhaserSMART Technical Support assists the user in opening a Service Request with Xerox
Customer Support.
PhaserSMART provides support to users, while eliminating many of the help calls requesting
printer support. PhaserSMART Technical Support saves you time for more critical tasks.
Use one of the following options to access PhaserSMART Technical Support:
■ PrintingScout
■ Web
■ CentreWare IS
■ The printer driver
■ Xerox Support Centre
Using PrintingScout
If PrintingScout displays an alert on your screen, do the following:
1. Click the alert to view instructions explaining how to fix the problem.
2. Follow the instructions on the screen.
Using the Web

To access PhaserSMART Technical Support from the web:
1. Open your browser and go to www.phaserSMART.com.
2. Enter your printer’s IP address in the browser window.

1-2
PhaserSMART Technical Support
Using CentreWare IS
To access PhaserSMART Technical Support from CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Support.
4. Select the PhaserSMART Diagnostic Tool link.
Using a Windows Printer Driver

To access PhaserSMART Technical Support from your printer driver:
1. Select Start, select Settings, and then select Printers.
2. Right-click the printer name, and then select Properties.
3. Select the Troubleshooting tab.
4. Select the PhaserSMART Technical Support link.
Using the Xerox Support Centre

To access PhaserSMART Technical Support from the Xerox Support Centre:
1. Select one of the following options:

■ Windows: Double-click the Xerox Support Centre icon
on your desktop.
■ Macintosh: Click the Xerox Support Centre icon in the
dock.
2. Select your printer from the Select Printer drop-down list.
3. Select the Troubleshooting tab.
4. Select the Advanced Troubleshooting Resources link.
5. Click the PhaserSMART icon.
See also:
Xerox Support Centre on page 1-4

1-3
Xerox Support Centre
Xerox Support Centre

The Xerox Support Centre is a utility that is installed when running the driver installer. It is
available for systems with Windows 2000 and later or Mac OS X, version 10.2 and higher.
The Xerox Support Centre appears on the desktop for Windows systems or is placed in the
Mac OS X dock. It provides a central location for accessing the following information:
■ User manuals and video tutorials
■ Solutions to troubleshooting problems
■ Printer and supplies status
■ Supplies ordering and recycling
■ Answers to frequently asked questions
■ Default printer driver settings (Windows only)
Note: Xerox recommends that the Xerox driver installer be used to add a printer instead of the
Microsoft Add Printer Wizard. If the Microsoft Add Printer Wizard is used, the Xerox Support
Centre is not installed on the PC. Also, the Xerox driver installer installs the Xerox printer
driver, enabling users to work more efficiently by accessing printer features and resources to
solve simple problems. This eliminates many of the help calls requesting printer support,
saving you time for more critical tasks.
To start the Xerox Support Centre utility:
1. Select one of the following options:

■ Windows: Double-click the Xerox Support Centre icon
on your desktop.
■ Macintosh: Click the Xerox Support Centre icon in the
dock.
2. Select your printer from the Select Printer drop-down list.

1-4
Network Installation
Features
This chapter includes:

■ Using a Startup Network Configuration File on page 2-2
■ Printer Driver Installation Features on page 2-3
■ Discovery Protocols on page 2-5
See also:
Advanced Features Guide at www.xerox.com/office/support

2-1
Using a Startup Network Configuration File
Using a Startup Network Configuration File

■ About the Configuration File on page 2-2
■ Configuration File Requirements on page 2-2
■ Specifying the Location of the Configuration File on page 2-2
About the Configuration File

To configure printer settings or to perform other tasks, such as loading fonts, color tables, and
job patches, you can create a startup network configuration file. Every time the printer is
turned on or reset, the TFTP service on the TFTP server downloads the configuration file once
an IP address is acquired and confirmed in the printer. The TFTP service processes the data in
the configuration file as if it were a standard print job.
Configuration File Requirements

The configuration file must be:
■ A valid PostScript or PCL file that contains the appropriate PostScript, PCL, or PJL
commands. For a list of the Xerox-unique PCL and PJL commands, see Printer
Commands on page B-1.
■ Stored on a TFTP server that the printer can access over the TCP/IP network.
Specifying the Location of the Configuration File

To specify the location of the configuration file, do one of the following:
■ If the printer is connected to a TCP/IP network in a DHCP/BOOTP environment, use the
DHCP/BOOTP environment.
■ Use DHCP option 66 to specify the TFTP server IP address or hostname.
■ Use DHCP option 67 to specify the pathname of the configuration file.
For information on how to set these parameters, refer to your DHCP or BOOTP server
documentation.
■ If the printer is connected to a TCP/IP network in a non-DHCP environment, use
CentreWare Internet Services (IS). On the TCP/IP Settings page, under TFTP Settings,
do the following:
■ Enter the TFTP server IP address or hostname in the TFTP Server Name field.
■ Enter the pathname of the configuration file in the Boot File Name field.
For more information, see the CentreWare IS Online Help.

2-2
Printer Driver Installation Features

■ Walk-Up Printing Driver on page 2-3
■ Walk-Up Installation on page 2-3
■ Installation from the Printer’s Hard Drive on page 2-4
■ Auto-Configuring Driver on page 2-4
Walk-Up Printing Driver

The Xerox Walk-Up Printing Driver enables printing from a PC to any Xerox
Postscript-enabled printer. This is especially helpful for mobile professionals who travel to
multiple locations and need to print to different printers. Instead of installing the printer drivers
for each printer, you can download this driver from the web. Although it doesn’t enable access
to all printer-specific features, it does enable access to common printing features, such as
2-sided printing.
The driver contains basic features that are common to most of the Postscript-enabled printers,
including:
■ Portrait, landscape, and rotated landscape orientations
■ Single-sided or two-sided printing
■ Single or multiple pages per sheet (including booklet printing)
■ Paper or transparency printing
■ Page size selection
Note: For information about Xerox printer driver features that are available with specific
operating systems, see Printer Driver Features in the Advanced Features Guide for your printer
at www.xerox/office/support.
Walk-Up Installation
The Xerox Installer enables quick and easy installation of the printer driver. The installer is
included on the Software and Documentation CD-ROM, supplied with the printer, and is
available on the web. When you run the installer, the main screen lists the Xerox printers of
that model discovered on the network or connected via USB. You can choose one of the
discovered printers, enter the IP address of the desired printer, or use Walk-Up Technology.
This technology is especially helpful when there is more than one Xerox printer on the
discovered printers list and you don’t know the printer’s IP address. After selecting Walk-Up
Technology and clicking the Next button on the main installer screen, you simply walk up to
the desired printer and select Walk-Up Features and then Select for Installation on the
control panel. The installer connects the computer to the printer, completes the driver
installation, and then the printer prints a confirmation page.

2-3
Installation from the Printer’s Hard Drive

If the printer has an internal hard drive, you can install the printer driver from the hard drive.
This is especially useful if you do not have the Software and Documentation CD-ROM.
Note: If the printer doesn’t have a hard drive but is connected to the internet, you can use this
procedure to automatically connect to the web to install the driver.
To install the printer driver either from the hard drive or the web:
3. Click Support.
4. Select Software Installation on the left sidebar.
5. Select the Printer Drivers link.
6. Do one of the following:
■ If you are a Windows user, click Windows Driver Installer to install the driver, and
then click the Install button to install the printer.
■ If you are a Macintosh user, click Macintosh Driver Installer to download the driver.
Auto-Configuring Driver
For a printer connected to a network, the bi-directional communication between the driver and
the printer during installation automatically tells the installer the printer’s configuration (N,
DN, DX, etc.) and, therefore, whether the printer has certain features, such as duplexing
capability, additional trays, or a hard drive. As a result, the controls for settings, such as
2-sided printing, tray selection, and secure printing are displayed or hidden/grayed out, and the
mimic shows the correct printer configuration. This driver feature prevents users from making
incorrect selections during installation, eliminating many of the help calls requesting printer
support.

2-4
Discovery Protocols
Discovery Protocols
■ Multicast DNS on page 2-5
■ Service Location Protocol on page 2-5
Multicast DNS
To change the Multicast DNS (Bonjour) settings:
3. Click Properties.
4. Click the Protocols folder on the left sidebar.
5. Select TCP/IP.
6. If prompted, enter your Admin or Key User name and password.
7. Under DNS Settings, in the Multicast DNS Enable field, select one of the following:
■ On: The printer can respond to Multicast DNS and be automatically discovered on an
IP network by Apple Macintosh OS X technology.
■ Off: The printer cannot be automatically discovered.
8. If you selected On, follow the instructions on the page. For more information, including a
description of the fields, click the Help button in CentreWare IS to view the online help.
9. Click the Save Changes button.
Service Location Protocol

To change the configuration of the Service Location Protocol (SLP) Service Agent in the
printer:
4. Click the Protocols folder on the left sidebar.
5. Select TCP/IP.
7. Under Service Location Protocol (SLP) Settings, in the SLP Enable field, select On or
Off.
8. If you selected On, follow the instructions on the page. For more information, including a
description of the fields, click the Help button in CentreWare IS to view the online help.

2-5
Network
Administration
Features
■ Printer Neighborhood on page 3-2
■ Job Accounting on page 3-3
■ Usage Profile Reports on page 3-4
■ Xerox Usage Analysis Tool on page 3-5
■ Protocol Control on page 3-6
■ Cloning on page 3-13

3-1
Printer Neighborhood
Printer Neighborhood
Printer Neighborhood is a tool in CentreWare IS that enables you to search for printers on your
network, check their status, and manage them remotely. You can also install, manage, and view
printer usage information. Access to the embedded server in each printer enables you to
perform other management tasks.
The default printer search mode is Quick Phaser Search, which quickly finds the Phaser
printers on your local subnet. To search for all types of printers or to change other defaults,
click the Preferences tab.
Note: Javascript is required in order to access and use pages in Printer Neighborhood. If
Javascript is disabled, a warning message is displayed and the pages will not function properly.
To access Printer Neighborhood:

3. Click the Printer Neighborhood button.
A list of network printers is displayed.
4. To view topics contained in Printer Neighborhood, click Neighborhood Index.

3-2
Job Accounting
Job Accounting
The printer stores information about print jobs. This information is stored in a log file, which
lists job records. Each job record contains fields such as user name, job name, pages printed,
job times, and toner or ink used. Not all fields are supported by all printers. For more
information about the fields supported, go to the CentreWare IS Online Help or
CentreWare Web Online Help.
The job accounting values reported also vary depending on the protocol and print command
used when each job was printed. For example, using Windows via the default standard TCP/IP
port with the Xerox recommended PostScript driver specific to your model provides the printer
with the most information about the job being printed. When using other drivers with various
protocols, the operating system may enter unexpected information in certain fields, such as a
job name listed as LST: or LST:BANNER.
The log file is stored either in the printer’s RAM memory or on the hard drive if one is
installed in the printer. Xerox recommends that a hard drive be used for job accounting.
■ With a hard drive, the printer can store information about 5000 print jobs. The data in the
log file is saved when the printer is turned off or reset.
■ Without a hard drive, the printer can store information about the most recent 50 to 500
print jobs depending on available RAM. The data in the log file is not saved when the
printer is turned off or reset.
Note: Data in job accounting records may be a security risk because the names of users, as
well as the titles, date, time, and length of printed jobs can be exposed. The content of print job
pages is not stored in the job accounting system.
Job accounting is available through CentreWare IS and CentreWare Web.

To access job accounting information using CentreWare IS:
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Jobs.
The Job Accounting Links page provides links that enable you to browse, download, and
clear job accounting records. For complete information on CentreWare IS job accounting,
including clearing job information, downloading job information to a file, and job accounting
file formats, click the Help button in CentreWare IS to view the online help.
To access CentreWare Web, go to www.xerox.com/office/pmtools.

3-3
Usage Profile Reports
Usage Profile Reports

The printer generates reports accessible through CentreWare IS that detail device usage. Usage
profile reports track multiple items, including:
■ Printer information, such as printer name, date installed, total pages printed, options
installed, and network ID.
■ Supplies usage data, such as toner or ink. By tracking supplies usage, you can order
supplies before they reach their end of life.
■ Media and tray information, such as how often prints are made on paper compared to
transparencies, and how often each tray is used.
■ Job characteristics, such as size and timing of jobs.
Setting Up Usage Profile Reporting

To set up usage profile reporting:
3. Click Jobs.
4. Select Usage Profile Reports on the left sidebar.
5. Click the Usage Profile Properties link. Follow the instructions on the page to set up
reports. For more information, including a description of the fields, click the Help button
in CentreWare IS to view the online help.
Sending Usage Profile Reports

To send a usage profile report:
2. Enter the printer’s IP address in your browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Jobs.
4. Select Usage Profile Reports on the left sidebar.
5. Enter the desired email address in the Send to Specific Address field.
6. Click the Send Usage Profile Report button.
Note: To send usage profile reports using email, MaiLinX must be properly set up. See
MaiLinX Remote Printing on page 3-10.

3-4
Xerox Usage Analysis Tool
Xerox Usage Analysis Tool

The Xerox Usage Analysis Tool enables you to collect and analyze enterprise-wide Xerox
network printer usage data with customizable features:
■ Cost Analysis: Track printing costs by groups of users or by groups of printers.
■ Print Job Analysis: Analyze print jobs to review media type, color coverage, paper
source, and other job specifics. Plan your next consumable order based on prior usage.
■ Printer Usage Analysis: Track printer usage patterns to identify printers that are
underworked or overused.
■ Reports: Collect and present printer data in a number of formats with complete
transaction and summary reports designed for Excel or other custom billing systems.
For complete information about using the Xerox Usage Analysis Tool provided by the
application’s online help system, go to www.xerox.com/office/uat.
System Requirements
■ IP network
■ Xerox printer with Ethernet interface (optional hard drive recommended)
■ Xerox Usage Analysis Tool client:
■ A PC with an Intel Pentium III processor or higher, at least 128 MB of RAM, and at
least 500 MB of hard drive space recommended.
■ Operating systems supported: Windows 2000 Professional or later and Windows XP
or later.
■ Xerox Usage Analysis Tool server:
■ A PC with an Intel Pentium III processor or higher, at least 256 MB of RAM, and at
least 1 GB of hard drive space recommended.
■ Operating systems supported: Windows 2000 or later, Windows XP or later, and
Windows 2003 server or later.
■ Framework: .NET Framework 1.1 (included with the Xerox Usage Analysis Tool)

3-5
Protocol Control
Protocol Control
■ HTTP on page 3-6
■ TCP/IP on page 3-6
■ Port 9100 on page 3-7
■ LPR on page 3-7
■ IPP on page 3-8
■ SNMP on page 3-8
■ Email Server on page 3-9
■ MaiLinX Remote Printing on page 3-10
■ MaiLinX Alerts on page 3-11
See also:
Discovery Protocols on page 2-5
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you want to
use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical
Support at www.xerox/office/support.
See also:
About HTTP, HTTPS, and SSL/TLS on page 4-3
TCP/IP
To change TCP/IP settings:
4. Select the Protocols folder on the left sidebar.
5. Select TCP/IP.
7. In the BOOTP/DHCP box, select one of the following:
■ On: The printer issues BOOTP and DHCP requests on startup.
■ Off: The printer does not issue BOOTP or DHCP requests on startup.

3-6
Protocol Control
8. If you selected Off, follow the instructions in the TCP/IP Settings section to manually
enter the printer’s TCP/IP information.
■ Enter the TFTP server IP address or hostname in the TFTP Server Name field.
■ Enter the pathname of the configuration file in the Boot File Name field.
9. Under DDNS/WINS Settings, in the DDNS box, select one of the following:
■ On: The printer registers its IP name and address so other devices on the network can
refer to it by name.
■ Off: The printer does not register its IP name and address. If DDNS is Off, these
values may be set by BOOTP/DHCP if enabled.
10. If you selected On, follow the instructions in DDNS/WINS Settings to manually enter
settings to identify the printer. For more information, including a description of the fields,
click the Help button in CentreWare IS to view the online help.
Port 9100
To change Port 9100 settings:
5. Select Port 9100.
7. Select On or Off in the Port 9100 box.
8. If you selected On, follow the instructions on the page to select Port 9100 settings. For
more information, including a description of the fields, click the Help button in
CentreWare IS to view the online help.
LPR
To change LPR settings:
5. Select LPR.
7. Select On or Off in the LPR box.

3-7
Protocol Control
8. If you selected On, follow the instructions on the page to select LPR settings. For more
information, including a description of the fields, click the Help button in CentreWare IS
to view the online help.
IPP
To change IPP settings:
5. Select IPP.
7. Select On or Off in the IPP (Internet Printing Protocol) box.
8. If you selected On, follow the instructions on the page to select IPP settings. For more
Note: To configure IPP for secure/encrypted printing, specify a username, password, and
digest authentication (for Windows only). Every client that tries to print to the printer over
IPP must enter this information. The user name and password are sent in plain text to the
printer. If you specify digest authentication, the password is secured before it is sent to the
printer.

SNMP
For information on configuring SNMP, see Configuring SNMP on page 4-14.
FTP
To change FTP settings:
5. Select FTP.
7. Select On or Off in the FTP box.

3-8
Protocol Control
8. If you selected On, follow the instructions on the page to select FTP settings. For more
Email Server
You can configure email server settings in CentreWare IS by either:
■ Automatically identifying the SMTP email server (recommended).
■ Manually specifying the SMTP email server.
You can also specify a return email address for undelivered email, such as MaiLinX alerts and
usage profile reports, to your email address.
To configure email server settings:
5. Select Email Server.
■ To automatically identify the SMTP email server, click the Use DNS to Identify
SMTP Server (Automatic) option, and then enter the Primary Name Server IP
Address and the Secondary Name Server IP Address using the 4-byte IP address of
the email server.
■ To manually specify the SMTP email server, click the Specify SMTP Server
Manually option, and then enter the information for the email server. Set the 4-byte IP
address of the SMTP Email Server to send alert notifications. If there is no DNS
server, then only the IP Address is allowed.
8. (Optional) To specify an email address for returning undelivered email, enter your email
address in the Return Email Address field.
See also:
MaiLinX Alerts on page 3-11
Usage Profile Reports on page 3-4

3-9
Protocol Control
MaiLinX Remote Printing
About MaiLinX Remote Printing

MaiLinX Remote Printing provides the following key features:
■ The ability to send print jobs to a group of printers.
■ Print services across firewalls and proxies.
■ Status reporting using email messages.
MaiLinX Remote Printing consists of two parts:
■ Client software installed on each user’s workstation or PC enables users to send print jobs
from Windows applications to Xerox printers over the Internet. The client software
enables users to set up their Internet-connected printers and create groups and subgroups
of printers for easy distribution of print jobs.
■ A CentreWare IS Printing Service on a Xerox printer processes the print jobs from the
clients.
System Requirements
■ The client software requires an SMTP-capable email server/forwarder through which the
client software on the user’s computer can send email.
■ Each printer requires an account on a POP3-capable email server from which it can
retrieve email.
Setting Up MaiLinX Remote Printing

To set up your printer for remote printing:
5. Select Remote Printing.
7. Set the MaiLinX Remote Printing box to On. Follow the instructions on the MaiLinX
Remote Printing page to set up your printer for remote printing. For more information
including a description of the fields, click the Help button in CentreWare IS to view the
online help.

3-10
Protocol Control
MaiLinX Alerts
About MaiLinX Alerts

MaiLinX alerts enable the printer to automatically send email to you and/or specified users
when the following conditions occur:
■ The printer requires attention or when service is needed.
■ The printer displays an error, warning, or alert.
■ A reply to a MaiLinX Remote Printing message is desired.
For more information, click the Help button in CentreWare IS to view the online help.
Setting Up MaiLinX Alerts

To enable MaiLinX alerts:
4. Select the General folder on the left sidebar.
5. Select Mail Alerts.
7. Select On in the MaiLinX (and Usage Profile Properties) box.
8. Follow the instructions on the page to specify up to three users to receive messages:
Admin, Key User, and Service. You can also select advanced settings for:
■ Specifying email server settings.
■ Reading or changing default messages.
■ Reading or changing conditions and trigger settings.


3-11
Protocol Control
EtherTalk
To change EtherTalk settings:
5. Select EtherTalk.
7. Select On or Off in the EtherTalk box.
8. If you selected On, follow the instructions on the page to select Ethertalk options. For
more information, including a description of the fields, click the Help button in
CentreWare IS to view the online help.

3-12
Cloning
Cloning
Cloning enables you to configure one printer and then copy that configuration to another
printer on the same network. You can access cloning using CentreWare IS or CentreWare Web.
Using CentreWare IS, you can select the settings you want to clone from one printer to another
printer. Using CentreWare Web, you can select the settings you want to clone from one printer
to one or more printers.
To clone settings from one printer to another printer using CentreWare IS:
4. Select Clone Printer on the left sidebar.
6. On the Clone Printer page, select the settings you want to clone from the source printer or
click Check All to select all the settings. The settings are:
■ Usage Profile Properties
■ FTP
■ EtherTalk
■ Information Forwarding
■ E-Supplies
■ Printer Defaults
■ LPR
■ Security
■ Date and Time
■ Warmup
■ Control Panel Lockout
■ TCP/IP
■ Email Server
■ MaiLinX Alerts
■ USB
■ PostScript
■ Remote Printing
■ IPP (Internet Printing Protocol)
■ Port 9100
■ SNMP
■ PCL
■ SSL Configuration
7. Enter the IP address or DNS Name of the destination printer in the IP Address or DNS
Name field.
8. (Optional) To assign a printer name to the destination printer, enter this name in the
Printer Name (SNMP System Name) field.
9. If the destination printer is located in a different domain/zone, modify the information in
the EtherTalk Zone and/or IP Domain Name fields.

3-13
Cloning
10. Click the Clone Selected Settings button.

A list of the selected settings to clone is displayed.
11. Click the Clone button to clone the destination printer with the selected settings from the
source printer.
12. If prompted, enter the Admin or Key User name and password.
To access CentreWare Web, go to www.xerox.com/office/pmtools.

3-14
Security Features

■ Basic Concepts on page 4-2
■ Securing the Printer in a High Security Environment on page 4-5
■ Setting Up a Certificate on page 4-6
■ Configuring SSL on page 4-7
■ Configuring Administrator and Key User Settings on page 4-8
■ Configuring the Print Host Access List on page 4-9
■ Securing the Hard Drive on page 4-10
■ Locking the Control Panel Menus on page 4-13
■ Configuring SNMP on page 4-14
See also:
Jam Recovery on page 5-5

4-1
Basic Concepts
Basic Concepts
■ About Admin and Key User Accounts on page 4-2
■ About HTTP, HTTPS, and SSL/TLS on page 4-3
■ About Certificates on page 4-3
■ About Access Control Lists on page 4-4
About Admin and Key User Accounts

Admin and Key User accounts in CentreWare IS enable you to limit access to specific printer
functions by specifying passwords for user classes. CentreWare IS requires a name and
password before access to the controlled printer functions are allowed.
The user classes are:
■ Admin: The person with the ultimate management responsibility and authority for
controlling all functions of the printer.
■ Key User: A person who has some administrative responsibilities and who manages some
or all of the printer functions.
■ Any User: Includes the majority of people who will be sending print jobs to the printer.
Once the passwords are set, select the printer functions that each user class has the right to
access. The three categories of printer functions are:
■ Administrative Functions
■ Web Server Printing
■ Printer Neighborhood Functions
See also:
Configuring Administrator and Key User Settings on page 4-8

4-2
Basic Concepts
About HTTP, HTTPS, and SSL/TLS

HTTP (Hyper Text Transfer Protocol) is the protocol used to communicate across the internet
between the printer web server and the web browser (clients). Because the data is transmitted
in plain text and passwords are only slightly encrypted, it is not secure; the data can be read or
intercepted by other people.
HTTPS (Secure Hyper Text Transfer Protocol) is a secure version of HTTP. HTTPS provides
authentication and encrypted communication to preserve the confidentiality of your data.
Instead of using plain text, HTTPS uses either the SSL (Secure Socket Layer) protocol or the
TLS (Transport Layer Security) protocol to encrypt data, thus ensuring reasonable protection
from eavesdroppers and man-in-the-middle attacks.
Before using HTTPS, you must set up a certificate and select when to use SSL to encrypt data.
You can set the printer to use SSL either to secure web pages that use passwords or to secure
all web pages.
See also:
About Certificates on page 4-3
Setting Up a Certificate on page 4-6
Configuring SSL on page 4-7
About Certificates
A certificate is an electronic message containing information about the printer and a digital
signature. A certificate is stored in the printer and is used to validate the identity of the printer
to clients and network servers and to allow encrypted communication.
Before configuring passwords, set up a certificate and then configure SSL to encrypt data
including passwords for maximum security. You can set up a self-signed certificate or
download a root-signed certificate, depending on your requirements.
See also:
Self-Signed Certificates on page 4-3
Root-Signed Certificates on page 4-4
Self-Signed Certificates
Setting up a self-signed certificate is a quick and easy to establish a certificate on the printer.
The printer automatically generates a default self-signed certificate when the printer is turned
on for the first time. To modify the certificate so it is specific to your printer, use
CentreWare IS to enter information about the location of the printer.
While self-signed certificates are safe for most applications and allow data encryption, they do
not ensure valid authentication. Self-signed certificates are not necessarily secure because the
certificate owner is only confirming his own identify instead of verification by a trusted third
party. Although self-signed certificates encrypt the data that is exchanged, they do not prevent
man-in-the-middle attacks.

4-3
Basic Concepts
If you want to use HTTPS, each printer must have a unique certificate that is accepted by each
browser used to access the printer. This allows the printer web server to use HTTPS and
encrypt data between the web browser and the printer. In addition, because each printer’s
certificate is unique, you must load a different certificate into the browser for each printer the
browser will access.
Root-Signed Certificates
Root-signed certificates are from a trusted Certificate Authority (CA). Using a certificate
signed by a CA enables you to load one certificate into each browser, allowing access to all
printers. Certificates from a trusted third party are considered more secure than self-signed
certificates. Unlike self-signed certificates, root-signed certificates are not susceptible to
man-in-the-middle attacks.
See also:
Configuring SSL on page 4-7
About Access Control Lists

Access control lists enable you to limit access to devices, as well as device configuration and
management features. By default, access control lists are unrestricted, which means all
computers and host systems are allowed access.
The printer has four access control lists that may be configured using CWIS:
■ Print Host Access List: The computers from which users can print. For information on
setting up the Print Host Access List, see Configuring the Print Host Access List on
page 4-9.
■ Administrator Access List: The computers from which you can change printer settings.
For information on setting up the Administrator Access List, see Configuring
Administrator and Key User Settings on page 4-8.
■ Key User Access List: The computers from which key users can change printer settings.
For information on setting up the Key User Access List, see Configuring Administrator
and Key User Settings on page 4-8.
■ SNMP Access List: The host machines that are authorized to access the printer using
SNMP. For information on setting up the SNMP Access List, see Configuring the SNMP
Access Control List on page 4-18.

4-4
Securing the Printer in a High Security Environment
Securing the Printer in a High Security

Environment
If you are concerned about the security of your printer in a high security environment, such as
a college or printing kiosk, you can configure settings in CentreWare IS to “lockdown” or fully
secure the printer. If you are not concerned about the security of your printer, you may only
need to set up a certificate and then configure SSL to encrypt data including passwords.
To fully secure a printer:
1. Set up a certificate. (See Setting Up a Certificate on page 4-6.)
2. Select when to use SSL. (See Configuring SSL on page 4-7.)
Note: The following steps may be completed in any order.
3. Select the Administrator and Key User Settings. (See Configuring Administrator and Key
User Settings on page 4-8.)
Note: To prevent users from changing settings, clear the Modify Configuration Web
Pages check box. To prevent users from viewing settings, clear the View Configuration
Web Pages check box.
4. Set up the Print Host Access List. (See Configuring the Print Host Access List on
page 4-9.)
5. Select the Hard Drive Overwrite option. (See Securing the Hard Drive on page 4-10.)
6. Select the Jam Recovery option. (See Jam Recovery on page 5-5.)
7. Lock the control panel menus. (See Locking the Control Panel Menus on page 4-13.)
8. Configure SNMP. (See Configuring SNMP on page 4-14.)
9. Disable unused protocols. (See Protocol Control on page 3-6.)
Note: To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you
want to use IPP for a secure printing channel, disable the other printing protocols,
Port 9100 and LPR. Disabling some protocols also disables some printer functions, such
as printer discovery and PrintingScout.

4-5
Setting Up a Certificate
Setting Up a Certificate
To modify a self-signed certificate so it is specific to your printer or to install a downloaded
root-signed certificate on the printer:
4. Select the Security folder on the left sidebar.
5. Select SSL.
The Current State field displays the current state of the printer. Possible values include:
■ A digital certificate is not established on this machine. This state displays if an
error occurred when the certificate was created.
■ A self-signed certificate is established on this machine.
■ A digital certificate has been installed on this machine.
7. Click the Create Certificate button.

■ To modify a self-signed digital certificate, select Self-Signed Certificate.
■ To install a signed digital certificate that includes a private key from a trusted
Certificate Authority (CA), select Install downloaded Certificate.
9. Click the Next button.
■ If you selected Self-Signed Certificate, enter the appropriate information in the
fields, and then click the Finish button to save the settings. For more information,
including a description of the fields, click the Help button in CentreWare IS to view
the online help.
■ If you selected Install Downloaded Certificate, click the Browse button to select the
certificate from the PC’s hard drive, and then click the Finish button to validate and
install the certificate. Once the certificate is installed, the main SSL page displays.
See also:
About Certificates on page 4-3

4-6
Configuring SSL
Configuring SSL
Once a certificate is set up, you can select when to use SSL to secure the connection between
the printer and the server.
Note: You can restrict user access to SSL pages in CentreWare IS. For more information, see
Configuring Administrator and Key User Settings on page 4-8.
To configure SSL:
5. Select SSL.
7. In the Use SSL box, select one of the following options:
■ Never (the default): SSL authentication is not required.
■ To Secure Passwords: Secures web pages that use passwords.
■ To Secure Pages and Passwords: Secures all web pages.

See also:

4-7
Configuring Administrator and Key User Settings
Configuring Administrator and Key User Settings

To prevent unauthorized changes to printer settings:
5. Select Administrative Security Settings.
7. In the Administrator Settings box, do one or both of the following:
■ In the Host Access List field, enter the IP addresses or host names of the computers
allowed to change printer settings. Separate entries with a blank or a comma, specify
ranges with a hypen (-), and use an asterisk (*) to represent a group of numbers
(e.g., 13.62.156.*). The default setting is Unrestricted, which allows all users to
change printer settings.
■ In the User Name and Password fields, enter your user name and password (up to 10
alphanumeric characters). In Verify Password, re-enter the password. The user name
and password should be kept secure.
8. Repeat Step 7 in the Key User box. When entering the user name and password, enter the
user name and password for key users.
Note: If you want to use the Key User account, you must configure an Administrator
account. If the Administrator account is empty, then Any User has the same permissions as
the Administrator user.
9. In the Feature Authorization Settings box, select the check boxes next to the settings you
want to enable for each type of user. Clear the check boxes next to the settings you want to
prevent users from changing. The administrator has full rights and access to all functions.
Any User may not have greater access to a function than the Key User.
Note: If you want to prevent users in the Key User or Any User classes from using
CentreWare IS to change printer settings, clear the Modify Configuration Web Pages
check box. If you want to prevent users in the Key User or Any User classes from viewing
CentreWare IS pages that control printer settings, clear the View Configuration Web
Pages check box.

See also:
About Admin and Key User Accounts on page 4-2

4-8
Configuring the Print Host Access List
Configuring the Print Host Access List

To prevent unauthorized printing to your printer:
5. Select Printing Security Settings.
7. Enter the IP addresses or host names of the computers allowed printing access in the Host
Access List field. Separate entries with a blank or a comma, specify ranges with a
hypen (-), and use an asterisk (*) to represent a group of numbers (e.g., 13.62.156.*). The
default setting is Unrestricted, which allows all users to access the printer to print their
jobs.
See also:
About Access Control Lists on page 4-4

4-9
Securing the Hard Drive

■ Selecting the Hard Drive Overwrite Security Option on page 4-10
■ Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option on
page 4-11
Selecting the Hard Drive Overwrite Security Option

When a file is deleted from the printer’s hard drive, only the file name is deleted; the data in
the file remains on the hard drive, regardless of the operating system. An unauthorized person
could, possibly, retrieve the data in the file that was deleted.
Printers with a hard drive have a Hard Drive Overwrite Security option. This option overwrites
the data stored on the hard drive of a file marked for deletion using DOD5200.28-M, a U.S.
Department of Defense three-pass overwriting process: first with a pattern of 0’s, next with a
pattern of 1’s, and finally with a random pattern of bits. This is done before the file’s directory
entry is removed and the storage space on the hard drive is marked as available for reuse. The
random pattern of bits stays on the hard drive until it is overwritten by another file.
By default, the Hard Drive Overwrite Security option is disabled. To select the Hard Drive
Overwrite Security option, use one of the following methods:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel

To select the Hard Drive Overwrite Security option:
1. On the control panel, select Printer Setup, and then press the OK button.
2. Select File Security, and then press the OK button.
Note: If File Security is locked on the control panel, use CentreWare IS to select the
Hard Drive Overwrite Security option.
3. Select Overwrite Removals, and then press the OK button.

4. Select On or Off, and then press the OK button.
Using CentreWare IS
To select the Hard Drive Overwrite Security option:

4-10

7. Under Hard Drive Overwrite Security Options, select one of the following options:
■ Never overwrite files/jobs: Disables the printer’s overwrite feature.
■ Always overwrite when deleting files/jobs: Sets the printer to always overwrite the
files on the hard drive when they are deleted.
Selecting the Automatic Removal of Secure, Personal, and

Proof Jobs Option
The printer enables you to store secure, personal, and proof jobs on the hard drive and then
print them later. You can choose how long these jobs remain on the hard drive. This feature is
useful when someone:
■ Forgets about an unprinted secure, personal, or proof job that was stored on the hard drive.
■ Sends a secure job to the printer, but does not walk to the printer to print the job.
■ Stores a proof job, prints it once, and then forgets to delete it.
To set the automatic removal of secure, personal, and proof print files from the hard drive, use
one of the following methods:
■ CentreWare IS

To select the automatic removal of secure, personal, and proof print files from the hard drive:
1. On the control panel, select Printer Setup, and then press the OK button.
2. Select File Security, and then press the OK button.
Note: If File Security is locked on the control panel, use CentreWare IS to select the
Hard Drive Overwrite Security option.
3. To remove all secure, personal, and proof print job files:

a. Select Overwrite Removals, and then press the OK button.
b. Select On or Off, and then press the OK button.
Note: Remove Job Files does not remove saved or protected print job files.

4-11
4. To remove all secure, personal, and proof print files every day at a set time:
a. Select Daily Removal, and then press the OK button.
c. Select Remove At HH:MM, and then press the OK button.
d. Enter the hour, and then press the OK button.
e. Enter the minute, and then press the OK button.
5. To remove all secure, personal, and proof print files after the files are a certain age or
older:
a. Select Age-based Removal, and then press the OK button.
c. If you selected On, select Remove At Age, and then press the OK button.
d. Enter 1 to 999 hours, and then press the OK button.
Note: To reset all items in the File Security menu to their default values, select Reset File
Security.
Using CentreWare IS
To select the automatic removal of secure, personal, and proof print files from the hard drive:
7. Under Remove Unprinted Personal, Secure and Proof Jobs, select one or more of the
following options:
■ Upon Save Changes: All personal, secure, and proof jobs are removed when you
click the Save Changes button.
■ At this time each day (24hr): All unprinted personal, secure, and proof jobs are
removed at this time each day.
■ When jobs are: All unprinted, personal, secure, and proof jobs are removed when
they are this age or older.
Note: Files deleted using one of these options are overwritten if the Hard Drive Overwrite
Security option has been enabled. For more information, see Selecting the Hard Drive
Overwrite Security Option on page 4-10.


4-12
Locking the Control Panel Menus
Locking the Control Panel Menus

To prevent others from changing settings in the printer setup menus, you can lock some or all
of the control panel menus. This is useful when printers are located in public places, such as
schools, libraries, and office/print centers.
Use CentreWare IS to lock or unlock the control panel menus:
5. Select Control Panel Lockout.
7. Select the check box of each control panel menu item you want to lock.
Note: If you lose the Admin password and Reset NVRAM is locked on the control panel,
a Fee-For-Service call is required to reset the password and to enable changes to printer
settings. When the password is reset, you must reconfigure the printer settings because all
the stored data is deleted.


4-13
Configuring SNMP
Configuring SNMP
■ Configuring SNMP for Maximum Security on page 4-14
■ Configuring SNMP v1/v2c on page 4-15
■ Configuring SNMP v3 on page 4-16
■ Configuring the SNMP Access Control List on page 4-18
■ Disabling SNMP on page 4-19
If you are using SNMP, you must configure it using CentreWare IS. If you are not using
SNMP, disable it to prevent unauthorized access through applications that use SNMP. For
information on disabling SNMP, see Disabling SNMP on page 4-19.
Note: The Current State field on the SNMP Configuration page identifies the SNMP
enable/disable status. Possible values include SNMP v3 Enabled, SNMP v1/v2c Enabled,
and All SNMP Protocols Disabled.
Configuring SNMP for Maximum Security

Use CentreWare IS to configure SNMP for maximum security:
4. Select SSL:
a. Select the Security folder on the left sidebar, and then select SSL.
b. If prompted, enter your Admin or Key User name and password.
c. On the SSL page, for Use SSL, select To Secure Pages and Passwords.
5. Restrict access to the CentreWare IS SNMP and SSL pages:
a. Select Administrative Security Settings on the left sidebar.
c. On the Administrative Security Settings page, clear the View Configuration Web
Pages and Modify Configuration Web Pages check boxes for users who should not
have access to these pages.
6. Configure SNMP v3 by setting up the SNMP Administrative and Key User accounts:
a. Select the Protocols folder on the left sidebar, and then select SNMP.
c. On the SNMP Configuration page, click the Configure SNMP v3 button and set up
the SNMP Administrative account. For more information, see Configuring SNMP v3
on page 4-16.

4-14
Configuring SNMP
Configuring SNMP v1/v2c
Configuring SNMP v1/v2c Community Names

To configure SNMP v1v2c community names:
5. Select SNMP.
7. On the SNMP Configuration page, click the Configure SNMP v1/v2c button.
8. To set community names for GET/SET SNMP queries and traps, enter information (up to
32 alphanumeric characters) in one or more of the following fields:
Note: These names are not displayed on this page, but are shown as a row of asterisks (*).
■ GET Community Name: Allows a host to perform SNMP GETS on the printer using
this community name.
■ SET Community Name: Allows a host to perform SNMP SETS on the printer using
this community name.
■ Trap Community Name: Allows a host to receive traps from the printer using this
community name.
Note: Hosts must have these community names configured in their applications to access
the printer using SNMP v1/v2c.
9. Click the Apply button to save the changes.

Adding or Editing Traps for SNMP v1/v2c

To add or edit traps for SNMP v1v2c:
1. On the SNMP Configuration: Configure SNMP v1v2c page, click the Configure Traps
button.
The SNMP Configuration: Configure Traps page lists the current Trap Destination
Addresses for the SNMP protocol.
■ The Address column lists the Trap Destination IP address or DNS Name.
■ The Version/Type column lists the SNMP Trap version or Inform Request for sending
to the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMP
v2c Traps, and SNMP v2c Inform Requests.
■ The Traps column lists the types of traps to send to the Trap Destination Address.
Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, and
Authentication Traps.

4-15
Configuring SNMP

■ To add traps for SNMP v1v2c, click the Add Destination button, and then go to
Step 3.
■ To edit the settings for a Trap Destination Address, click the corresponding Edit
button, and then go to Step 3.
■ To delete a Trap Destination Address, click the corresponding Delete button.
3. To add or edit a Trap Destination IP Address, click the IP Address radio button, and then
enter the IP Address in the fields.
4. To add or edit a Trap Destination DNS Name, click the DNS Name radio button, and then
enter the DNS Name in the field.
5. For a non-standard UDP port, enter the UDP Port Number in the field.
6. Select the SNMP trap version to send to the specified address. SNMP versions include
SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests.
SNMP v1 Traps is the default.
7. Enter the community name of the destination device in the Community Name field.
8. For Traps to be received, select the check boxes of the different types of traps to send to
the specified address. Traps to be received include Printer Traps (default), Job Monitoring
Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.
9. Click the Apply button to save the changes.
Configuring SNMP v3
When configuring SNMP v3, you can set up:
■ Admin and Key User accounts with Privacy and Authentication Keys associated with each
account.
■ SNMP user read and write access.
■ An access control list that limits SNMP printer access to the specific hosts. See
Configuring the SNMP Access Control List on page 4-18.
To configure and enable SNMP v3:
5. Select SNMP.
7. On the SNMP Configuration page, click the Configure SNMP v3 button.
The current settings for the SNMP v3 Administrative User, Key User, and Any
User/Driver accounts display.

4-16
Configuring SNMP
The Administrative User Account section displays the following information:

■ User Name: Displays the Administrative User account name defined on the
Configure SNMP v3: Administrative User Account page.
■ Authentication Key: Displays a row of asterisks (*) if the Hide Typing check box is
selected on the Configure SNMP v3: Administrative User Account page. Displays
the Authentication Key if the Hide Typing check box is cleared.
■ Privacy Key: Displays a row of asterisks (*) if the Hide Typing check box is selected
on the Configure SNMP v3: Administrative User Account page. Displays the
Privacy Key if the Hide Typing check box is cleared.
■ SNMP Read: Displays a check symbol if SNMP Read access is enabled for the
Administrative User Account.
■ SNMP Write: Displays a check symbol if SNMP Write access is enabled for the
Administrative User Account.
The Key User Account section displays the following information:
■ User Name: Displays the Key User Account name defined on the Configure SNMP
v3: Key User Account page.
■ Authentication Key: Displays a row of asterisks (*) if the Hide Typing check box is
selected on the Configure SNMP v3: Administrative User Account page. Displays
the Authentication Key if the Hide Typing check box is cleared.
■ Privacy Key: Displays a row of asterisks (*) if the Hide Typing check box is selected
on the Configure SNMP v3: Administrative User Account page. Displays the
Privacy Key if the Hide Typing check box is cleared.
■ SNMP Read: Displays a check symbol if SNMP Read access is enabled.
■ SNMP Write: Displays a check symbol if SNMP Write access is enabled.
Note: SNMP Read and SNMP Write access for the Any User account must be equal to or
less than the read and write access privileges set for the Key User account. Once the Key
User account is created, if the Any User account is set to have read and/or write access, but
the Key User account access is not set, the Key User account is set with the same access
privileges as the Any User account by default. Similarly, if the Key User account does not
have SNMP Write access, the Any User account cannot be set with write access.
The Any User/Driver Account section displays the following information:

■ User Name: Displays anyuser by default and cannot be changed.
■ SNMP Read: Displays a check symbol if SNMP Read access is enabled. SNMP Read
access can be enabled for the Any User account after the Key User account is created.
■ SNMP Write: Displays a check symbol if SNMP Write access is enabled. SNMP
Write access can be enabled for the Any User account after the Key User account is
created.
■ Driver Account Enabled: Displays a check symbol if the Driver Account is enabled
(default).
Note: If the Driver Account is disabled, it breaks communication between the printer
and any applications using SNMP v3, such as Xerox printer drivers and PrintingScout. For
a complete list of applications disabled, see Disabling SNMP on page 4-19.

4-17
Configuring SNMP
8. Click the Configure Account(s) button. A series of pages display that enable you to
configure SNMP v3 and the Administrative User, Key User, and Any User/Driver
settings. The first page displays Administrative User account information after the account
has been created.
■ To create the Administrative User account and to enable SNMP v3, enter a user name
or accept the default name admin, and then click the Create button.
■ To configure the Key User and other account settings, click the Next button.
■ To delete the Administrative User account and disable SNMP v3, click the Delete
button. This also deletes all other accounts, including the Key User and Any User
settings.
Configuring the SNMP Access Control List

To set up a list of hosts that are authorized to access the printer using SNMP:
4. Select the Protocol folder on the left sidebar.
5. Select SNMP.
7. Enter up to ten host IP addresses in the SNMP Access Control List field. Separate entries
with a blank or a comma, specify ranges with a hypen (-), and use an asterisk (*) to
represent a group of numbers (e.g., 13.62.156.*).
See also:
About Access Control Lists on page 4-4

4-18
Configuring SNMP
Disabling SNMP
If you are not using SNMP, disable it to prevent unauthorized access through applications that
use these protocols. If you disable SNMP, the following driver features are also disabled:
■ PrintingScout alerts
■ Walk-Up Printing Installer
■ Smart Trays
■ PhaserSMART
■ Auto supplies ordering
■ Consumable levels
■ Warning and error status
■ Synchronization with installed options, such as hard drive, memory, and extra trays
To disable SNMP:
5. Select SNMP.
7. Click the Disable SNMP Now button.

4-19
.
Printing Features

■ Secure, Personal, Proof, and Saved Print Jobs on page 5-2
■ Smart Trays on page 5-5
■ Jam Recovery on page 5-5
■ Paper Tips Page on page 5-6

5-1
Secure, Personal, Proof, and Saved Print Jobs

These features are available if your printer has an internal hard drive. These jobs are stored on
the hard drive and remain in the printer even when it is turned off.
Select one of the following special job types:
■ Secure Print: Prints the job only after you enter the four-digit numeric password on the
control panel. This is useful for printing confidential documents. It eliminates the risk of
confidential documents lying unattended in the printer’s output tray, where they are
vulnerable to theft and unauthorized viewing.
■ Personal Print: Prints the job when you select your user name on the printer’s control
panel or in CentreWare IS. This eliminates the risk of personal documents lying
unattended in the printer’s output tray, where they are vulnerable to theft and unauthorized
viewing.
■ Proof Print: Prints only one copy of the job so that you can proof the copy. If you want to
print the remaining copies, select the job name on the printer’s control panel.
■ Saved Print: Stores the job on the hard drive so you can print it on demand from the
control panel. The job is not deleted after printing. This is useful for any document you
frequently print, such as tax forms, personnel forms, or requisition forms.
Note: Protected Jobs are another special job type. These are jobs that have been copied or
moved from the Public Jobs group in CentreWare IS. For more information, click the
Help button in CentreWare IS to view the online help.

5-2
Specifying Secure, Personal, Proof, and Saved Print Jobs

Use a supported driver to specify a job as a secure print, personal print, proof print, or saved
print job:
Operating System Steps
Windows 98 SE, 1. Select the Output Options tab.

Windows Me, 2. Select the job type under Walk-Up Features.
Windows 2000,
■ For a secure print job, enter a four-digit password to assign to this
Windows XP,
job.
Windows Server 2003,
Windows NT 4.x ■ For a proof print or saved print job, enter the name you want to give
PostScript driver this job.
Mac OS 9 driver In the Print dialog box, select the job type from the Job Type drop-down
list.
■ For a secure print job, enter a four-digit password to assign to this
job.
■ For a proof print or saved print job, enter the name you want to give
this job in the Job Name field.
Mac OS X (version In the Print dialog box, select the job type from the Job Types
10.2 and higher) driver drop-down list.
■ For a secure print job, enter a four digit number, ranging from 0000
through 9999, in the Job Password field.
■ For a proof print or saved print job, enter a document name (up to 20
alpha characters) in the Document Name field.
Note: Personal print jobs are not supported in Windows 98 SE and Windows Me.

5-3
Printing or Deleting Secure Print Jobs

To print or delete a secure print job, specify the four-digit password on the control panel:
1. Select Walk-Up Printing, and then press the OK button.
2. Select Secure Print Jobs, and then press the OK button.
3. Scroll to your User Name, and then press the OK button.
4. Scroll to the correct number for the first digit of the numeric password, and then press the
OK button to accept that digit.
5. Repeat Step 4 for the second, third, and fourth digits.
Note: If you enter less than four digits in the driver’s Password field, enter zeros before
your password so that there are four digits displayed on the control panel. For example, if
you entered 222 in the driver, enter 0222 on the control panel. Use the Back button to
return to a previous digit.
6. If you submitted more than one secure print job with that password, select the desired job
or select All of Them, and then press the OK button.
7. Select Print and Delete or Delete, and then press the OK button to print or delete the
job.
You can also use CentreWare IS to delete secure print jobs:
3. Click Jobs.
4. Select Delete Secure Jobs on the left sidebar.
■ To delete all jobs, select Delete All Secure Jobs.
■ To delete jobs associated with a specific user name and password, select Delete
Secure Jobs with the Following, and then enter the User Name and Numeric
Password associated with the jobs.
7. Click the Delete Job(s) button.
Printing or Deleting Personal Print Jobs

To print or delete a personal print job, select your user name on the control panel:
2. Select Personal Print Jobs, and then press the OK button.
3. Select your User Name, and then press the OK button.
4. Select Print and Delete or Delete, and then press the OK button to print or delete all of
your personal print jobs.

5-4
Smart Trays
Printing or Deleting Proof and Saved Print Jobs

To print a saved print job, print the remaining copies of a proof print job, or delete a saved or
proof print job, select the job name on the control panel:
2. Select Proof Print Jobs or Saved Print Jobs, and then press the OK button.
3. Select your job name, and then press the OK button. (If you use the Windows NT printer
driver, select NT4User as the job name.)
4. Select Print and Delete (for proof prints), Print and Save (for saved prints), or
Delete, and then press the OK button.
5. If you are printing, scroll to the desired number of copies, and then press the OK button to
print the job.
Smart Trays
The Smart Trays feature in the Windows drivers enables you to view the size and type of
media in each tray of the printer before sending the job. In Windows environments, when you
access the printer properties, the driver queries the printer for the current paper and tray
configuration and displays that information on the Paper/Quality tab.
Jam Recovery
The jam recovery settings enable you to select how the printer handles jobs that are in the
process of printing when a media jam occurs. Jam recovery settings are especially important to
consider when printing checks. Normally when a media jam occurs, you can pull out the
jammed media and the printer reprints that page and then the rest of the job. While printing
checks, someone could cause a media jam as the media is exiting the printer so that a check is
reprinted. To prevent the printer from printing two copies of the same check, you can set the
printer to begin printing the job from the point where the media jammed, excluding the
jammed media, through the end of the job.
To configure the jam recovery setting, use one of the following methods:
■ CentreWare IS

5-5
Paper Tips Page

To configure the jam recovery setting:
1. On the control panel, select Paper Tray Setup, and then press the OK button.
2. Select Paper Handling Setup, and then press the OK button.
Note: If Paper Handling Setup is locked on the control panel, use CentreWare IS to
select the jam recovery setting.
3. Select Reprint Jammed Pages, and then press the OK button.

4. Select On or Off, and then press the OK button.
Using CentreWare IS
To configure the jam recovery setting:
7. Under Jam Recovery Options, select one of the following options:
■ Reprint the jammed page and continue printing the rest of the job: After the jam
is cleared, the printer begins printing the job from the point where the media jammed,
including the jammed page, through the end of the job.
■ Do not reprint the jammed page, but do continue printing the rest of the job:
After the jam is cleared, the printer begins printing the job from the point where the
media jammed, excluding the jammed page, through the end of the job.
Paper Tips Page

For information on the supported media types and corresponding trays, print the Paper Tips
page:
1. On the control panel, select Information, and then press the OK button.
2. Select Information Pages, and then press the OK button.
3. Select Paper Tips Page, and then press the OK button.

5-6
Glossary
Terms and Abbreviations
Terms and
Abbreviations Definitions
access control list A CentreWare IS feature that enables you to limit access to devices, as
well as device configuration and management features.
Admin account A CentreWare IS feature that enables you to limit access to specific
printer functions by specifying a name and password. The Admin account
has the most permissions. The administrator must know the Admin name
and password to access the printer functions in CentreWare IS.
authentication A CentreWare IS feature that requires users to login with a network

user ID and password for security and tracking purposes.
bi-directional A type of connection in which communications are sent and received

simultaneously.
BOOTP BOOTP (Boot Parameter Protocol) is a protocol that allows a network

user to be automatically configured (receive an IP address) and have an
operating system boot or initiated without user involvement.
CentreWare Internet CenterWare IS is a printer administration and support tool. With

Services (IS) CenterWare IS software, you can access printer status and manage your
printer over a TCP/IP network using a web browser.
CentreWare Web A web-based, device-management solution for Windows 2000

environments where you use a browser for administration.
certificate An electronic message containing information about the printer and a

digital signature, which is stored in the printer. A certificate is used to
validate the identity of the printer to clients and network servers and to
allow encrypted communication.
DHCP DHCP (Dynamic Host Configuration Protocol) is a protocol in which

UNIX, Windows, NT, and Window 2000 servers can dynamically allocate
TCP/IP addresses.
DNS DNS (Domain Name System) is used in the Internet for translating names
of network nodes into addresses.

6-1
Terms and
driver Software that is loaded on the client workstation that prepares data to be
sent to the printer.
EtherTalk A type of network connection (provided by EtherTalk software installed in

a Macintosh computer) that enables use of AppleTalk network services on
an Ethernet network.
FTP FTP (File Transfer Protocol) is a basic TCP/IP connectivity utility used to
transfer data between computers.
host A computer or other device on a TCP/IP network.
HTTP HTTP (Hyper Text Transfer Protocol) is a non-secure protocol used to

communicate across the internet between the printer web server and the
web browser (clients).
HTTPS HTTPS (Secure Hyper Text Transfer Protocol) is a secure protocol used
to provide authentication and encrypted communication to preserve the
confidentiality of your data.
Internet The global collection of networks that are connected together and share a
common range of IP addresses.
IP The network protocol used for sending network packets over a TCP/IP
network.
IP address A unique 32-bit address for a host on a TCP/IP network or Internet

working.
IPP IPP (Internet Printing Protocol) is an application-level protocol that is used

for distributed printing on the Internet and intranets, designed and
implemented by Xerox research to validate the IPP specification and as
an aid in developing IPP servers.
job accounting The purpose of job accounting is to collect and report information about
all jobs that print. The information collected identifies the submitter of the
job and the resources used to print the job.
Key User account A CentreWare IS feature that enables you to limit access to specific
printer functions by specifying a name and password. You can set up a
Key User account that is password protected. The Key User has the
ability to change some printer settings. CentreWare IS requires the name
and password before access to the printer function is allowed.
LPR LPR (Line Printer Remote) is an application-level printing protocol that

uses TCP/IP to establish connections between printers and workstations
on a network.
MaiLinX alerts A feature in CentreWare IS that allows the printer to automatically send
email to you and others under certain conditions.
MaiLinX remote printing A feature in CentreWare IS that enables you to print to Xerox printers over
the Internet, directly from Windows applications. The print jobs are sent
as email.
mDNS mDNS (multicast DNS) is a multicast-based discovery protocol that

enables you to find your printer on an Apple network or another device
that uses multicast-based discovery.

6-2
Terms and
MIB MIB (Management Information Base) provides specific information about

the state of hardware components and software processes. MIB is used
as part of network management tools and functions.
network A collection of connected devices, such as computers and printers. A

network is a tool for communication that allows users to store and retrieve
information, share printers, and exchange information.
network address The network portion of an IP address. For a class A network, the network
address is the first byte of the IP address. For a class B network, the
network address is the first two bytes of the IP address.
network connection The software and protocol that connect network devices, such as PCs
and printers.
PCL PCL (Printer Control Language) is the PDL language created by

Hewlett-Packard. It became an industry standard and is now available in
almost all printer platforms for the office (e.g., PCL 5).
PJL PJL (Printer Job Language) and PCL commands are used in application
programs to control job settings and printer defaults.
PhaserSMART PhaserSMART Technical Support is an automated, internet-based

Technical Support support system that uses the user’s default web browser to send
diagnostic information from their printer to the Xerox website for analysis.
Port 9100 A printing protocol known as AppSocket, RAW, or Windows TCPmon.
PostScript A page description language created by Adobe and used in most Xerox
Phaser printers.
printer driver Enables your computer and printer to communicate; provides access to
the features of your printer.
printer discovery Software mechanism for finding printers typically on a network.
Printer Neighborhood A tool in CentreWare IS that enables you to search for printers on your
network, check their status, and manage them remotely.
PrintingScout alerts PrintingScout is a tool that is installed with the Xerox printer driver. It
automatically checks the printer status when a print job is sent. If the
printer is unable to print a job, PrintingScout automatically displays an
alert on the user’s computer screen to let them know that the printer
needs attention. The user can click the alert to view instructions
explaining how to fix the problem.
printing kiosk A digital imaging/print platform that is used to connect a laptop computer
to a network for printing to a printer, and then paying for the output. A
printing kiosk is sometimes located in an airport or library.
protocol The rules that control the transmitting and receiving of data.
SLP SLP (Service Location Protocol) is a protocol that provides a flexible and
scalable framework for providing hosts with access to information about
the existence, location, and configuration of networked services. SLP is
useful in enterprise networks.
Smart Trays A driver feature that displays the current paper type and size available in
each printer tray.

6-3
Terms and
SMTP SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail
messages between servers.
SNMP SNMP (Simple Network Management Protocol) is a protocol used to help

manage complex networks. SNMP-compliant devices store data about
themselves in MIBs (Management Information Bases) and return this
data to the SNMP requestors.
SSL SSL (Secure Socket Layer) is a protocol that has become the universal
standard on the Web for authenticating sites and for encrypting
communications between users and Web servers. Because SSL is built
into all major browsers and Web servers, simply installing a digital
certificate or Server ID enable SSL capabilities.
TCP/IP TCP/IP (Transmission Control Protocol/Internet Protocol) is a set of

communication protocols that is supported by a variety of computer
platforms. TCP controls data transfer, and IP controls data routing.
TFTP TFTP (Trivial File Transfer Protocol) is a version of the TC/IP FTP protocol
that uses UDP and has no directory or pass capability.
TLS TLS (Transport Layer Security) is a protocol for establishing a secure

connection between the client and the server. TLS is capable of
authenticating both the client and the server and creating an encrypted
connection between the two. HTTP uses TLS to establish secure
connections.
UDP UDP (User Datagram Protocol) is a minimal message-oriented transport

layer protocol found on domain name servers (DNS).
Walk-Up Printing Driver The Xerox Walk-Up Printing Driver enables printing from a PC to any
Xerox Postscript-enabled printer. For more information, see Walk-Up
Printing Driver on page 2-3.
Walk-Up Technology The Xerox Print Driver Installer (Windows) is a software utility that
provides for quick and easy installation of the printer driver. One choice
for installation is Walk-Up Technology. For more information, see Walk-Up
Installation on page 2-3.
Xerox Usage Analysis The Xerox Usage Analysis Tool enables you to collect and analyze
Tool enterprise-wide Xerox network printer usage data with customizable
features.

6-4
Configuration Card
Parameters
The printer has a configuration card that stores network parameters and configuration (N, DN,
DX, etc.) data. The configuration card is hot swappable, enabling you to share or replace it,
providing an alternative to on-site service.
Network settings are saved on the configuration card. If the configuration card is removed
from an old printer and inserted into a new printer, the saved settings on the configuration card
are copied to the new printer when it is powered on. The new printer assumes the identity of
the old printer, eliminating the need to reconfigure network settings.
This appendix includes:
■ General Information Parameters on page A-2
■ PostScript Parameters on page A-2
■ PCL Parameters on page A-3
■ USB 2.0 Parameters on page A-3
■ Hard Drive Parameters on page A-3
■ Network Information Parameters on page A-3
■ PhaserShare Series B Interface for Ethernet Network Parameters on page A-3
■ EtherTalk Parameters on page A-4
■ TCP/IP Parameters on page A-4
■ DNS Parameters on page A-4
■ SLP Parameters on page A-5
■ SSDP Parameter on page A-5
■ NBNS (WINS) Parameters on page A-5
■ Access Control Parameter on page A-5
■ LPR Parameters on page A-5
■ AppSocket (Port 9100) Parameters on page A-5
■ IPP (Internet Printing Protocol) Parameters on page A-5
■ SNMP Parameters on page A-6
■ HTTP (CentreWare IS) Parameters on page A-6
■ FTP Parameters on page A-6
■ Status Notification Parameter on page A-6
■ MaiLinX Remote Printing Parameters on page A-7

A-1
General Information Parameters
General Information Parameters

■ Printer Name
■ Startup Page Enabled
■ Printer ID
■ Sys/Start Job
■ Job Timeout
■ Load Paper Timeout
■ Manual Feed Timeout
■ Power Saver Timeout
■ Intelligent Ready
■ Paper Source
■ Tray 1
■ Tray 2
■ Tray 3
■ Tray 4
■ Tray 5 (Phaser 6300/6350 only)
Note: The Tray 3, Tray 4, and Tray 5 parameters are only stored on the printer
configuration card if the tray is installed in the printer.
■ Tray 1 (MPT) Behavior (Phaser 6300/6350 printer only)

■ Tray 1 (MPT) Prompt (Phaser 6300/6350 printer only)
■ Tray 2 - N Prompt (Phaser 6300/6350 printer only)
■ Letter/A4 Substitution
■ 2-Sided Printing
■ Power Saver
■ Metric Defaults
■ Metered Toner (Phaser 6300/6350 printer only)
PostScript Parameters
■ Printer Quality
■ TekColor Correction
■ Error Info
■ Image Smoothing

A-2
PCL Parameters
PCL Parameters
■ Font Number
■ Pitch
■ Point Size
■ Symbol Set
■ Orientation
■ Form Length
■ Line Termination
USB 2.0 Parameters

■ Language
■ Wait Timeout
Hard Drive Parameters

The hard drive parameters are only stored on the configuration card if the printer has an
internal hard drive.
■ Overwrite Deleted Files
■ Daily Removal
■ Age-based Removal
Network Information Parameters

■ Wait Timeout
■ Sys Admin Contact
■ Printer Location
PhaserShare Series B Interface for Ethernet

Network Parameters
■ Network Speed/Type
■ Network Address

A-3
EtherTalk Parameters
EtherTalk Parameters
■ Language
■ Filtering
■ Name
■ Printer Type
■ Zone
■ Network Node
TCP/IP Parameters
■ Host Name
■ Host Name Requested
■ IP Address
■ Network Mask
■ Router/Gateway
■ DHCP/BOOTP
■ IP Address Source
■ DHCP Server
■ DHCP Lease Expiration
■ DHCP Lease Renewal
■ DDNS
■ SMTP Server
■ SMTP Reverse Path
DNS Parameters
■ Primary Server
■ Secondary Server
■ Multicast DNS (Bonjour) Enable

A-4
SLP Parameters
SLP Parameters
■ Directory Agent Discovery Enable
■ Directory Agent
■ Scope 1
■ Scope 2
■ Scope 3
■ SLP Multicast Enable
■ SLP Multicast TTL
■ SLP MTU
SSDP Parameter
■ SSDP TTL
NBNS (WINS) Parameters

■ Node Type
■ WINS Servers
Access Control Parameter

■ Host Access List
LPR Parameters
■ Filtering
■ Enable Banners
AppSocket (Port 9100) Parameters

■ Language
■ Filtering
IPP (Internet Printing Protocol) Parameters

■ Language
■ Filtering
■ Network Path

A-5
SNMP Parameters
SNMP Parameters
■ SNMP v1/v2c
■ SNMP v3
■ Host Access List
■ Admin Account
■ Key User Account
■ Any User Account
■ Drivers Account
HTTP (CentreWare IS) Parameters

■ Custom Link
■ Refresh Delay
■ Administrator Password
■ Key User Password
■ Use SSL
■ Machine Digital Certificate
FTP Parameters
■ Language
■ Filtering
■ Login Password
Status Notification Parameter

■ Disabled

A-6
MaiLinX Remote Printing Parameters
MaiLinX Remote Printing Parameters

■ Language
■ Filtering
■ POP3 Server
■ POP3 User Name
■ POP3 Password
■ POP3 Polling Interval
■ Printing Password
■ Authorized Users

A-7
Printer Commands
Printer Control Language (PCL) and Printer Job Language (PJL) commands can be used to
control print job settings and printer defaults. In addition to the standard PCL and PJL
commands, the Phaser printers support Xerox-unique PCL and PJL commands. This appendix
lists the most commonly used standard and Xerox-unique PCL and PJL commands.
This appendix includes:
■ Phaser 6300/6350 PCL Commands on page B-2
■ Phaser 8500/8550 PCL Commands on page B-5
■ Phaser PJL Commands on page B-8
See also:
HP PCL 5 Printer Language Reference Manual for standard PCL commands.

B-1
Phaser 6300/6350 PCL Commands

■ Media Size on page B-2
■ Media Type on page B-3
■ Input Trays on page B-4
Media Size
The following table lists the PCL commands for the media sizes supported by the
Phaser 6300/6350 printer. For information on the corresponding trays supported, print the
Paper Tips page. See Paper Tips Page on page 5-6.
Note: If you are using custom sizes in PCL commands, you need to load the paper into the
tray, set the type and size on the control panel, select the printing options in the printer driver,
and then send the job to the printer from the software application’s Print dialog box.
Media Size PCL 5 Command*
A4 (210 x 297 mm) <Esc>&l26A
A5 (148 x 210 mm) <Esc>&l25A
A6 (105 x 148 mm) <Esc>&l24A
ISO-B5 (176 x 250 mm) <Esc>&l65A
B5-JIS (182 x 257 mm) <Esc>&l45A
Statement (5.5 x 8.5 in.) <Esc>&l15A
Executive (7.25 x 10.5 in.) <Esc>&l1A
Letter (8.5 x 11in.) <Esc>&l2A
US Folio (8.5 x 13 in.) <Esc>&l10A
Legal (8.5 x 14 in.) <Esc>&l3A
A7 Envelope (5.25 x 7.25 in.) <Esc>&l84A
B5 Envelope (175 x 250 mm) <Esc>&l100A
#10 Commercial Envelope (4.12 x 9.5 in.) <Esc>&l81A
Monarch Envelope (3.87 x 7.5 in.) <Esc>&l80A
C5 Envelope (162 x 229 mm) <Esc>&l91A
DL Envelope (110 x 220 mm) <Esc>&l90A
Custom <Esc>&l101A
* The character that follows the “&” in the command is the lowercase letter “L”.

B-2
Media Type
The following table lists the PCL commands for the media types supported by the
Phaser 6300/6350 printer.
Media Type PCL 5 Command
Plain Paper <Esc>&n6WdPaper
Heavy Plain Paper <Esc>&n11WdHeavyPaper
Transparency <Esc>&n13WdTransparency
Thin Card Stock <Esc>&n14WdThinCardStock
Thick Card Stock <Esc>&n15WdThickCardStock
Envelope <Esc>&n9WdEnvelope
Labels <Esc>&n6WdLabel
Letterhead <Esc>&n11WdLetterhead
Glossy Paper <Esc>&n12WdCoatedPaper
Colored Paper <Esc>&n13WdColoredPaper
Preprinted <Esc>&n11WdPreprinted
Prepunched <Esc>&n11WdPrepunched
Special <Esc>&n8WdSpecial

B-3
Input Trays
The following table lists the PCL commands for the input trays supported by the
Phaser 6300/6350 printer. The table also lists the alternate tray used if the optional input tray is
not installed.
Note: When more than one command is listed, you can use either command.
Input Tray PCL 5 Command* Alternate Tray
Tray 1 (MPT) in multi-sheet mode <Esc>&l4H n/a

<Esc>&6H
Tray 1 (MPT) in manual feed mode <Esc>&l2H

<Esc>&l3H
Tray 2 <Esc>&l1H n/a
Tray 3 <Esc>&l5H Tray 2

<Esc>&l20H
Autoselect <Esc>&l7H n/a
Current tray/page eject <Esc>&l0H n/a

B-4

■ Media Size on page B-5
■ Media Type on page B-6
■ Input Trays on page B-7
Media Size
The following table lists the PCL commands for the media sizes supported by the
Phaser 8500/8550 printer. For information on the corresponding trays supported, print the
Paper Tips page. See Paper Tips Page on page 5-6.
A4 (210 x 297 mm) <Esc>&l26A
A5 (148 x 210 mm) <Esc>&l25A
A6 (105 x 148 mm) <Esc>&l24A
B5-ISO (176 x 250 mm) <Esc>&l65A
B5-JIS (182 x 257 mm) <Esc>&l45A
Statement (5.5 x 8.5 in.) <Esc>&l15A
Executive (7.25 x 10.5 in.) <Esc>&l1A
Letter (8.5 x 11 in.) <Esc>&l2A
US Folio (8.5 x 13 in.) <Esc>&l10A
Legal (8.5 x 14 in.) <Esc>&l3A
A7 Envelope (5.25 x 7.25 in.) <Esc>&l84A
#10 Commercial Envelope (4.12 x 9.5 in.) <Esc>&l81A
DL Envelope (110 x 220 mm) <Esc>&l90A
#5-1/2 Envelope (4.375 x 5.75 in.) <Esc>&l208A
#6-3/4 Envelope (3.625 x 6.5 in.) <Esc>&l83A
Monarch Envelope (3.8 x 7.5 in.) <Esc>&l80A
Brochure Envelope (6 x 9 in.) <Esc>&l207A

B-5
Choukei 3 Gou (120 x 235 mm) <Esc>&l87A
Choukei 4 Gou (90 x 205 mm) <Esc>&l86A
Index Card (3.0 x 5.0 in.) <Esc>&l78A
Custom <Esc>&l101A
Media Type
The following table lists the PCL commands for the media types supported by the
Phaser 8500/8550 printer.
Media Type PCL 5 Command
Plain Paper <Esc>&n6WdPaper
Transparency <Esc>&n13WdTransparency
Card Stock <Esc>&n10WdCardStock
Envelope <Esc>&n9WdEnvelope
Labels <Esc>&n6WdLabel
Letterhead <Esc>&n11WdLetterhead
Colored Paper <Esc>&n13WdColoredPaper
Preprinted <Esc>&n11WdPreprinted
Prepunched <Esc>&n11WdPrepunched
Special <Esc>&n8WdSpecial

B-6
Input Trays
The following table lists the PCL commands for the input trays supported by the
Phaser 8500/8550 printer. The table also lists the alternate tray used if the optional input tray is
not installed.
Note: When more than one command is listed, you can use either command.
Input Tray PCL 5 Command* Alternate Tray
Tray 1 in multi-sheet mode <Esc>&l2H n/a

<Esc>&l3H
<Esc>&l4H
<Esc>&l6H
Tray 2 <Esc>&l1H n/a

<Esc>&l20H
Autoselect <Esc>&l7H n/a
Current tray/page eject <Esc>&l0H

B-7
Phaser PJL Commands
Phaser PJL Commands

The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.
See also:
HP Printer Job Language Technical Reference for the standard set of PJL commands.
PJL Command Values Description
@PJL FSDELETE NAME=“pathname” * Deletes a file from the internal

hard drive.
@PJL FSDIRLIST NAME=“pathname” * Lists PJL system files and

directories.
@PJL FSDOWNLOAD FORMAT:BINARY * Downloads a file to the internal

SIZE=size NAME=“pathname” hard drive.
@PJL FSINIT VOLUME=value * Initializes the internal hard drive.
@PJL FSMKDIR NAME=“pathname” * Creates the specified directory

on the internal hard drive.
@PJL FSUPLOAD NAME=“pathname” * Uploads file from the printer to

the host.
@PJL USTATUS * Allows the printer to send

unsolicited status messages for
device status changes,
end-of-job status, and pages
printed. Status can be sent at
specified time intervals.
@PJL USTATUSOFF n/a Turns off all status responses.
@PJL FSAPPEND n/a Appends data to an existing file,

or if the file doesn’t exist, creates
the file and loads it with the given
data.
@PJL XCLIENTJOBID=value Exactly 48 bytes Sets the client job id used with
(first byte is 8 and PrintingScout.
the 8 last bytes
represent a time in
the format
hhmmsshs.
@PJL XJAFILENAME=“filename” Roman-8 Sets the file name for Job

characters Accounting.
1-255
@PJL XJAHOSTNAME=“hostname” Roman-8 Sets the host name for Job

1-255
@PJL XJAJOBNAME=“jobname” Roman-8 Sets the job name for Job

1-255

B-8
Phaser PJL Commands
@PJL XJAUSERNAME=“username” Roman-8 Sets the user name for Job

1-255
@PJL XJOBPASSWORD=value 4-digit string (1-9) Assigns the job password used
by Secure Print.
@PJL XPERSONALJOB n/a Starts a Personal Print job.
@PJL XPROOFJOB n/a Starts a Proof Print job.
@PJL XSAVEDJOB n/a Starts a Saved Print job.
@PJL XSECUREJOB n/a Starts a Secure Print job.
@PJL XIGNOREFF ON, OFF Ignores FormFeed commands

when printing PCL blank pages.
@PJL XLINETERMINATION=value ON, OFF Terminates a line.
@PJL XMBFSIZE=value ANY or any Sets the media size for Tray 1.
supported media
size, such as
LETTER,
STATEMENT, and
EXECUTIVE.
@PJL XMEDIASOURCE=value ANY, TRAYn Sets the media source.
@PJL XMEDIATYPE=value ANY or any Sets the media type.

supported media
type, such as
PAPER and
LABEL.
@PJL XPCLTRAYSWITCH=value ON, OFF Switches trays when a tray goes

empty. If AutoSelect is chosen as
the paper source (tray) in PCL,
then tray switching is always
active, regardless of the value.
When the current tray goes
empty, the printer attempts to
switch to another tray containing
the same size and type of paper.
This command only takes effect
when a specific tray, such as
Tray 2, is selected in the job.
When this command is ON, tray
switching still occurs when the
tray goes empty. When this
command is OFF, no switching
occurs and the user is prompted
to load paper.

B-9
Phaser PJL Commands
@PJL XPCLPAPERSRCx = y x is 0, 1, 2, 3, 4, 5, Overrides the tray selected in the

6, 7, 8, 20, 21, 22, <Esc>&l#H PCL tray selection
23, which is the commands.
number in the
<Esc>&l#H tray
selection
commands.
y is -1 for
AutoSelect, 0 for
the current tray
(eject page), 1 for
Tray 1, 2 for Tray 2,
etc., and 99 for the
factory defaults.
* See the HP Printer Job Language Technical Reference for the values.

B-10
Acknowledgements
Original SSLeay License

Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The
implementation was written so as to conform with Netscape’s SSL.
This library is free for commercial and non-commercial use as long as the following
conditions are adhered to. The following conditions apply to all code found in this distribution,
be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation
included with this distribution is covered by the same copyright terms except that the holder is
Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
■ Redistributions of source code must retain the copyright notice, this list of conditions and
the following disclaimer.
■ Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
■ All advertising materials mentioning features or use of this software must display the
following acknowledgement:
■ “This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).”
■ The word ‘cryptographic’ can be left out if the routines from the library being used are not
cryptographic related.
■ If you include any Windows specific code (or a derivative thereof) from the apps directory
(application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com).”

C-1
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The license and distribution terms for any publicly available version or derivative of this code
cannot be changed, i.e., this code cannot simply be copied and put under another distribution
license [including the GNU Public License.]
Net-SNMP License
Part 1: CMU/UCD copyright notice: (BSD like) -----

Copyright © 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright © 1996, 1998-2000 The Regents of the University of California. All rights
reserved.
Permission to use, copy, modify and distribute this software and its documentation for any
purpose and without fee is hereby granted, provided that the above copyright notice appears in
all copies and that both that copyright notice and this permission notice appear in supporting
documentation, and that the name of CMU and The Regents of the University of California not
be used in advertising or publicity pertaining to distribution of the software without specific
written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU
OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.

C-2
Part 2: Networks Associates Technology, Inc. copyright notice (BSD) -----
Copyright © 2001-2003, Networks Associates Technology, Inc. All rights reserved.
■ Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
■ Neither the name of the Networks Associates Technology, Inc. nor the names of its
contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
DAMAGE.
Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----

Copyright © 2001-2003, Cambridge Broadband Ltd. All rights reserved.
■ The name of Cambridge Broadband Ltd. may not be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS”' AND
ANYEXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

C-3
DAMAGE.
Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----

Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California
95054, U.S.A. All rights reserved.
Use is subject to license terms below.
This distribution may include materials developed by third parties. Sun, Sun Microsystems,
the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in
the U.S. and other countries. Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions are met:
■ Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior
written permission.
DAMAGE.

C-4
Part 5: Sparta, Inc. copyright notice (BSD) -----
Copyright © 2003-2004, Sparta, Inc. All rights reserved.
■ Neither the name of the Networks Associates Technology, Inc. nor the names of its
contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
DAMAGE.
Other Copyright Notices

Copyright © 2002-2003 Apple Computer, Inc. All rights reserved.
This file contains Original Code and/or Modifications of Original Code as defined in and that
are subject to the Apple Public Source License Version 2.0 (the 'License'). You may not use
this file except in compliance with the License. Please obtain a copy of the License at
http://www.opensource.apple.com/apsl/ and read it before using this file.
The Original Code and all software distributed under the License are distributed on an 'AS IS'
basis, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND
APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
Please see the License for the specific language governing rights and limitations under the
License.

C-5
Copyright © 1983, 1989 Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms are permitted provided that: (1) source
distributions retain this entire copyright notice and comment, and (2) distributions including
binaries display the following acknowledgement: “This product includes software developed
by the University of California, Berkeley and its contributors” in the documentation or other
materials provided with the distribution and in all advertising materials mentioning features or
use of this software. Neither the name of the University nor the names of its contributors may
be used to endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Copyright © 2000 Caldera Systems, Inc. All rights reserved.
■ Neither the name of Caldera Systems nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written
permission.
DISCLAIMED. IN NO EVENT SHALL THE CALDERA SYSTEMS OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
DAMAGE.
Copyright © 1991, 1999 Free Software Foundation, Inc.
Blowfish is covered by the GNU General Lesser Public License © 1991, 1999 Free Software
Foundation, Inc. that can be found at www.gnu.org/copyleft/lesser. The licensed library is
available for download at www.schneier.com/code/bfsh-koc.zip or at cost to distribute by
request to Xerox Corporation.
JPEG Library
This software is based in part on the work of the Independent JPEG Group.

C-6
Index
A selecting
about the configuration file, 2-2 automatic removal of secure,
access control lists, 4-4 personal, and proof jobs option,
definition, 6-1 4-12
specifying access to printer settings, 4-8 hard drive overwrite security option,
specifying printer access using SNMP, 4-10
4-18 jam recovery settings, 5-6
specifying printing access, 4-9 setting up a certificate, 4-6
Admin usage profile reports, 3-4
Access List, 4-4 CentreWare Web
account, 4-2 accessing, 3-3, 3-13
configuring settings, 4-8 definition, 6-1
definition, 6-1 certificates, 4-3
analyzing printer usage data, 3-5 definition, 6-1
authentication root-signed, 4-4
definition, 6-1 self-signed, 4-3
auto-configuring driver, 2-4 setting up, 4-6
changing
email server settings, 3-9
B EtherTalk settings, 3-12
basic concepts, 4-2 FTP settings, 3-8
bi-directional hard drive overwrite security setting,
definition, 6-1 4-10
BOOTP IPP settings, 3-8
definition, 6-1 LPR settings, 3-7
mDNS settings, 2-5
Port 9100 settings, 3-7
C SLP settings, 2-5
CentreWare IS TCP/IP settings, 3-6
checking printer status, 3-2 checking printer status, 3-2
configuring Admin and Key User cloning, 3-13
settings, 4-8 color tables
configuring the Print Host Access List, loading, 2-2
4-9 commands, B-1
definition, 6-1 concepts, 4-2
job accounting, 3-3 configuration card, A-1
locking the control panel, 4-13 configuration card parameters, A-1
restricting access to SNMP and SSL configuration file, 2-2
pages, 4-14
securing the printer, 4-5

Index-1
Index
configuring E
Admin and Key User settings, 4-8 email
Print Host Access List, 4-9 configuring server settings, 3-9
SNMP Access Control List, 4-18 MaiLinX alerts, 3-11
SNMP for maximum security, 4-14 enabling
SSL, 4-7 EtherTalk, 3-12
control panel FTP, 3-8
locking menus, 4-13 IPP, 3-8
selecting LPR, 3-7
automatic removal of secure, mDNS, 2-5
personal, and proof jobs option, Port 9100, 3-7
4-11 SLP, 2-5
hard drive overwrite security option, TCP/IP, 3-6
4-10 EtherTalk, 3-12
jam recovery option, 5-6 definition, 6-2
D F
deleting finding printers on the local subnet, 3-2
personal print jobs, 5-4 fonts
proof print jobs, 5-5 loading, 2-2
saved print jobs, 5-5 FTP, 3-8
secure print jobs, 5-4 definition, 6-2
DHCP
definition, 6-1
digital certificates, 4-3 G
disabling getting help
EtherTalk, 3-12 Knowledge Base, 1-1
FTP, 3-8 PhaserSMART Technical Support, 1-1,
HTTP, 3-6 1-2
IPP, 3-8 PrintingScout alerts, 1-2
LPR, 3-7 Technical Support, 1-1
mDNS, 2-5 glossary, 6-1
Port 9100, 3-7
SLP, 2-5
SNMP, 4-19
H
TCP/IP, 3-6 hard drive
discovery protocols, 2-5 automatic removal of jobs option, 4-11
DNS installing the printer driver, 2-4
definition, 6-1 overwrite security option, 4-10
driver securing, 4-10
auto-configuring, 2-4 host
definition, 6-2, 6-4 definition, 6-2
installer, 1-4 HTTP, 3-6, 4-3
walk-up printing, 2-3 definition, 6-2
HTTPS, 4-3
definition, 6-2

Index-2
Index
I locking the control panel menus, 4-13

information log file
sources, 1-1 job accounting, 3-3
installing the printer driver LPR, 3-7
from the CD-ROM, 2-3 definition, 6-2
from the hard drive, 2-4
from the web, 2-3 M
Internet MaiLinX
definition, 6-2 alerts, 3-11
IP definition, 6-2
definition, 6-2 remote printing, 3-10
IP address definition, 6-2
definition, 6-2 setting up, 3-10
IPP, 3-8 managing printers remotely, 3-2
definition, 6-2 mDNS, 2-5
definition, 6-2
J MIB
jam recovery, 5-5 definition, 6-3
job accounting, 3-3
definition, 6-2 N
log file, 3-3 Net-SNMP License, C-2
records, 3-3 network
job patches definition, 6-3
loading, 2-2 network address
jobs definition, 6-3
secure, personal, proof, and saved print network configuration file, 2-2
jobs, 5-2 network connection
usage profile reports, 3-4 definition, 6-3
K O
Key User options
Access List, 4-4 automatic removal of secure, personal,
account, 4-2 and proof jobs, 4-11
configuring settings, 4-8 hard drive overwrite security, 4-10
definition, 6-2 Original SSLeay License, C-1
Knowledge Base, 1-1
P
L
parameters on the configuration card, A-1
loading PCL
color tables, 2-2 commands, A-1, B-1
fonts, 2-2 definition, 6-3
job patches, 2-2
lockdown procedure, 4-5

Index-3
Index
personal print jobs, 5-2 protocols

deleting, 5-4 controlling, 3-6
printing, 5-4 definition, 6-3
specifying, 5-3 discovery, 2-5
PhaserSMART Technical Support, 1-1, 1-2 email server, 3-9
PJL EtherTalk, 3-12
commands, A-1, B-1 FTP, 3-8
definition, 6-3 HTTP, 3-6
Port 9100, 3-7 IPP, 3-8
definition, 6-3 LPR, 3-7
PostScript MaiLinX alerts, 3-11
definition, 6-3 MaiLinX remote printing, 3-10
Print Host Access List, 4-4 mDNS, 2-5
configuring, 4-9 Port 9100, 3-7
printer, 2-4 securing, 3-6
analyzing usage, 3-5 SLP, 2-5
commands, B-1 SNMP, 3-8
configuration card parameters, A-1 TCP/IP, 3-6
cost analysis, 3-5
discovery
definition, 6-3
R
driver records
definition, 6-3 job accounting, 3-3
installation features, 2-3 remote printing, 3-10
walk-up installation, 2-3 reports
securing in a high security environment, usage analysis, 3-5
4-5 usage profile, 3-4
viewing usage information, 3-2 Reset NVRAM, 4-13
Printer Neighborhood, 3-2 root-signed certificates, 4-4
definition, 6-3
printing S
personal print jobs, 5-4 saved print jobs, 5-2
proof print jobs, 5-5 deleting, 5-5
saved print jobs, 5-5 printing, 5-5
secure print jobs, 5-4 specifying, 5-3
PrintingScout alerts, 1-2 searching for printers on your network, 3-2
proof print jobs, 5-2 secure print jobs, 5-2
deleting, 5-5 deleting, 5-4
printing, 5-5 printing, 5-4
specifying, 5-3 specifying, 5-3
secure, personal, and proof jobs
selecting automatic removal of, 4-11

Index-4
Index
securing troubleshooting
control panel, 4-13 Knowledge Base, 1-1
hard drive, 4-10 PhaserSMART Technical Support, 1-1,
printer in a high security environment, 1-2
4-5 PrintingScout alerts, 1-2
SNMP and SSL pages, 4-14 Technical Support, 1-1
selecting
automatic removal of secure, personal,
and proof jobs option, 4-11
U
self-signed certificates, 4-3 UDP
sending usage profile reports, 3-4 definition, 6-4
setting up Usage Analysis Tool, 3-5
certificate, 4-6 definition, 6-4
MaiLinX alerts, 3-11 system requirements, 3-5
MaiLinX remote printing, 3-10 usage profile reports, 3-4
usage profile reporting, 3-4 sending, 3-4
SLP, 2-5 setting up, 3-4
definition, 6-3
Smart Trays, 5-5 V
definition, 6-3 viewing printer usage information, 3-2
SMTP
definition, 6-4
SNMP, 3-8 W
Access List, 4-4 Walk-Up installation, 2-3
configuring for maximum security, 4-14 Walk-Up Printing Driver, 2-3
configuring the access control list, 4-18 definition, 6-4
definition, 6-4
disabling, 4-19
specifying the location of the configuration X
file, 2-2 Xerox Support Centre, 1-4
SSL, 4-3 Xerox Usage Analysis Tool, 3-5
configuring, 4-7 definition, 6-4
definition, 6-4
startup network configuration file, 2-2
Support Centre, 1-4
system requirements
MaiLinX remote printing, 3-10
Usage Analysis Tool, 3-5
T
TCP/IP, 3-6
definition, 6-4
Technical Support, 1-1
TFTP
definition, 6-4
TLS, 4-3
definition, 6-4

Index-5

Sys Admin Guide en PDF

Uploaded by

Copyright:

Available Formats

Sys Admin Guide en PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sys Admin Guide en PDF

Uploaded by

Copyright:

Available Formats

Office Printers

Phaser® 6300/6350 color laser printer

PrintingScout Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

PhaserSMART Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

2 Network Installation Features

Printer Driver Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Discovery Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

3 Network Administration Features

Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Xerox Usage Analysis Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Administrator Guide

Protocol Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Securing the Printer in a High Security Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting Up a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Configuring SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Configuring Administrator and Key User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Configuring the Print Host Access List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Locking the Control Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

System Administrator Guide

Smart Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Jam Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

A Configuration Card Parameters

PostScript Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

PCL Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

USB 2.0 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Hard Drive Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Network Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

EtherTalk Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

TCP/IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

DNS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

SLP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

SSDP Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

NBNS (WINS) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Access Control Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

LPR Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

AppSocket (Port 9100) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

IPP (Internet Printing Protocol) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

System Administrator Guide

SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

HTTP (CentreWare IS) Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Status Notification Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

MaiLinX Remote Printing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

Phaser 8500/8550 PCL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Phaser PJL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

System Administrator Guide

This section includes:

Setup Guide* Packaged with printer

Printer Management Tools www.xerox.com/office/pmtools

Knowledge Base www.xerox.com/office/support

PhaserSMART Technical Support. For more www.phaserSMART.com

Technical Support www.xerox.com/office/support

Information pages Control panel menu

* Also available on the Support website.

System Administrator Guide

PhaserSMART Technical Support

Using the Web

System Administrator Guide

Using a Windows Printer Driver