Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    EThernet RFID Reader User Manual New

    Uploaded by

    thanhnd
    This Ethernet RFID reader can read ID, IC or HID cards over an Ethernet network. It supports TCP/IP and can easily connect to LAN, WAN or MAN networks. The reader comes in three models that can read different card types at various frequencies. It has Ethernet and buzzer interfaces and supports real-time data transmission using configurable data formats. The reader's ID and configuration can be set using a software tool over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EThernet RFID Reader User Manual New

    Uploaded by

    thanhnd
    126 views5 pages
    This Ethernet RFID reader can read ID, IC or HID cards over an Ethernet network. It supports TCP/IP and can easily connect to LAN, WAN or MAN networks. The reader comes in three models that can read different card types at various frequencies. It has Ethernet and buzzer interfaces and supports real-time data transmission using configurable data formats. The reader's ID and configuration can be set using a software tool over the network.

    Original Description:

    Document for setup and use EThernet RFID Reader model TCP/IP 125Hz

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This Ethernet RFID reader can read ID, IC or HID cards over an Ethernet network. It supports TCP/IP and can easily connect to LAN, WAN or MAN networks. The reader comes in three models that can read different card types at various frequencies. It has Ethernet and buzzer interfaces and supports real-time data transmission using configurable data formats. The reader's ID and configuration can be set using a software tool over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    126 views5 pages

    EThernet RFID Reader User Manual New

    Uploaded by

    thanhnd
    This Ethernet RFID reader can read ID, IC or HID cards over an Ethernet network. It supports TCP/IP and can easily connect to LAN, WAN or MAN networks. The reader comes in three models that can read different card types at various frequencies. It has Ethernet and buzzer interfaces and supports real-time data transmission using configurable data formats. The reader's ID and configuration can be set using a software tool over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    Ethernet RFID Reader User Guide

    Introduction
    Ethernet RFID Reader is based on TCP/IP, can read ID,IC or HID cards。This readers can
    easily connect to network(LAN,WAN,MAN).Installation is very easy. It meets the needs of M2M

    According to the different card types can divided into three:


    1) ETHIDR: it can read the 125khz ID CARDS
    2) ETHICR: it can read the 13.56Mhz IC card, such as Mifare S50,S70,etc.
    3) ETHHIDR: it can read some HID cards,
    Include PROX CARDⅡ, PROXKEYⅡ,PROXCARD PLUS
    Features
    z 10/100M Ethernet interface, Support MDI/MDIX
    z Support TCP Server, TCP Client, UDP Server, UDP Client and DHCP.
    z Can transmission between different Gateways, Also can use in Internet.
    z Support command to drive the on-board buzzer
    z Real-time transmission
    z Effective distance is larger than 5cm
    z 5V DC supply, low power consumption less than 250MA.
    z Working temperature -20 to 75，Storage -40 to 85
    Interface
    This RJ45 integrated network filter and tow LED(one indicate the LINK status, another is
    rx/tx status. ),The pins of the RJ45 as follow.
    Command
    There are two commands. The command value sends in Hex
    CMD0
    Drive the buzzer(this command has no responds)

    This ‘N’ means the length of the voice. With value between 0 to 255.
    Example: we can send hex value 00 01 FF FF to drive the buzzer with a short sound.
    CMD1
    This command used to read the ID of the readers, you can give a unique ID to one reader with
    the soft of configure tools

    Response of CMD1

    The 2nd to 6th bytes is a 5-byte reader’s ID, with value in hex..
    Data Format
    When then card near the reader, a data packet uploaded to the sever or client.The data is in
    the following format:
    Format 1: Data in hex value, the data package include the reader’s ID and card’s ID, As
    fallowing:
    0th to 4th（5BYTE） 5th to 9th(5 BYTE)
    Reader’s ID Card’s ID
    Read’s ID: This ID can be changed use the config tools. Like this:

    Card’s ID: always use the last 4 byte. We can convert the 4 byte from hex to dec.
    Format 2: Data in ASSIC value, the data package as following:

    STX(1byte) Card’s ID CR(1byte) LF(1byte) ETX(1byte)


    (10BYTE)
    0x02 10byte ASSIC 0x0D 0x0A 0x03
    Use this format, first we can covert the 10 byte ASSIC to hex value. HID reader can only use
    this format.
    How to choose one of the data format? Use the config tools like:

    How to set the configurations of the reader.


    First ,Connect the reader to the network.
    Second, Open the config tools and click the “SCAN” button,an then you can see the
    reader’s IP and MAC.like this:
    Third, Modify the parameters of the interface and then you should download it to the reader use
    the “Connnect”and“CONFIG” button.As:
    a) Double-click the IP in the DeviceIP list area, then the connect button can be click,
    as follow:

    b) Click the connect button,and then click the CONFIG button, you can see the
    configurations will be download to the reader.

    You might also like