Control Room Operator: J.Bala Dinesh
Control Room Operator: J.Bala Dinesh
Control Room Operator: J.Bala Dinesh
CAREER PROFILE
To achieve a challenging position and rewarding career in a well-established reputed
organization as Control Room Operator that would offer me and aspiration opportunities
for the organization growth.
EDUCATION
✓
DME (Diploma in Mechanical Engineering)
PROFESSIONAL EXPERIENCE:
TOTAL: 8 years of experience in oil & gas field.
SAFETY TRAININGS
Personal survival Technique, Fire Prevention fire Fighting, PTW Training, H2S Training &
SCBA, Elementary First Aid, Helicopter Underwater Escape Training, Mines vocational training.
SUMMERY OF EXPERIENCE:
During the past and present career experienced in the following areas
* Oil and Gas Gathering Stations * Water Treatment and Injection
* Safety shutdown system * Gas Sweetening Unit
* Well Head Operation and Maintenance
* Central Production Facility and Tank Farm * Pigging Operations
* Control Panel Operations
* Gas Dehydration Unit(MEG) * Oil and Gas Processing
* ReBoiler * Equipment’s Handling
* Gas Compression and Gas plant Operations * Utilities
* HCDP Unit
JOB DESCRIPTION:
Operation and control of wells through different headers for optimum production Oil
Manifolds, Gas lift manifolds, Surge tanks, Separators ( Two / Three Phase), Dehydration Tanks,
Water disposal pumps, Crude transfer pumps, Chemical injection, Gas/Oil line pigging operations,
Well testing, Computerized well testing etc.,
Gas compressors, Inter-stage scrubbers, Gas Treatment, Glycol Contactors, Glycol
regeneration unit, Gas export, Routine sampling of oil, Gas Glycol and Condensate, Isolations and De-
isolations of Equipment’s, Vessels and Tank for Maintenance, Familiar with work permits systems,
Gas testing, Mechanical and Electrical Isolation Procedures and Co-ordination with maintenance crew,
Trouble shooting and Reporting.
Offshore Production:
Well experienced in offshore production in Installations and rigs. Well Testing, Well
completion, Well Actuation, Choke and kill manifold, Start – Up and Shutdown procedures, Control
room operations, Emergency Procedures, Water Injections, Gas Compression, Oil Shipment, Chemical
Injection etc.,
Monitoring of wells, well performance, well/fire SDP and shutdown system, instrument gas,
firewater, drains, vents, functional checking of SSSV, SSV, control panel, preventive maintenance
and trouble shooting, manifold valve operations, different well activation methods, operation of X
mass tree valves, controlling the well flow with choke as per production requirement, gas lifting
operation, well testing placing new or re-completed wells on production, assisting during drilling and
post drilling operations such as well flow back, supervising the satellite platform while conducting hot
work. Calibration of the chemical injection pumps.
Operation knowledge on well head platform:
Inspection and operation of Christmas tree, flow line choke changing well actuating, well
equalizing, checking STHP, FTHP readings, well head panel operation, annulus pressure bleeding,
surface safety valve (SSV), sub surface safety valve (SSSV) operation, Test separator handling, well
testing oil/gas/water. Taking samples for check specific gravity and BS & W. Checking of water
injection and gas injection wells. Gas dehydration unit (GDU), Tri-ethylene Glycol (TEG) is used as
the dehydration medium. Heating Medium- STEAM.
Process Platform:
Field operation activities of 3 phase separators, chemical dosing, booster compressors, main oil
line pumps, hot oil pumps, produced water conditioner, sump and skimmer, skimmer pumps, GT
driven export gas compressors, GDU, Glycol regeneration unit, Water Processing for injection -
SWLP, electro chlorinator, coarse and fine filters, DOT, booster pumps, chemical dosing, main
injection pumps, Utility air and Instrument Air system, Pot water, Firewater and Fuel gas system.
Handling of Equipment:
Feed gas KOD, Dryers, Filter, Chiller, High Pressure and Low Pressure Separator, Economizer
flash vessel, Expander compressor, LEF condenser, LEF column, LEF Re boiler, LEF Reflux drum,
LEF Reflux pump, Reciprocating compressor, RG cooler, NGL cooler, NGL spiking pump, Booster
Safety system:
Work permit system, Process safety systems, Fire and gas safety systems, Emergency Shut
down Systems, H2S and hydrocarbon sensors, Ultra Violet and Infra Red flame sensors, Nitrogen
purging, Fire water system and pumps, Fusible plug loop, Water deluge system, Isolations, De-
isolations, Sea survival equipments, Lifeboats, and associated life saving equipments, Blow down
pump, Combined feed heater, Reactor, Shell & tube type exchangers, Fin fan coolers, Centrifugal &
Reciprocating pumps, Stripper, Scrubber, Hot oil expansion vessel, Dearator, Hot oil filter, Air
compressor, Nitrogen PSA( Pressure Swing Adsorber),Sphere, Bullet, Circulation pumps, all types of
control valves.
Experience in Valves:
Disassembly, Lapping & Reassembly, In-situ floating/Testing of Safety Valves.
Overhauling, Refurbishing & Calibration of Control Valves.
Overhauling &Servicing of Pneumatic and hydraulic Instruments for Reel wrapping.
Cleaning &Testing of Globe Valves.
Servicing &Testing of Shut off Valves.
Hiring of Services for Testing/ Calibration of Breather Valves.
Utilities:
PERSONEL DETAILS:
PASSPORT DETAILS:
Passport no : K8979292
Date of expiry : 02.01.2023
DECLARATION
I hereby declare that the information and facts stated above are true and complete to the best of
my knowledge and belief.
Date: