Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Simatic S7-200 Micro PLC: Ordering Information Description

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

SIMATIC® S7-200 Micro PLC General

Description Ordering Information


The SIMATIC S7-200 Micro PLC system offers a complete range of products to  Use complete catalog number.
fit almost any control or automation application. Each compact S7-200 CPU  See page 660 for a list of available
unit is completely self-contained and includes the CPU, power supply, and models.
input/output points (I/O). The S7-200 Micro PLC is capable of simple discrete
control, or analog control with PID and floating-point math capability. Larger
systems, with additional I/O, communications, or operator interface require-
ments, can easily be configured by adding expansion modules or our cost
effective operator interface products.

Complete Automation Solution Integrated Communications Key Features


The SIMATIC S7-200 Micro PLC is a All S7-200 CPUs offer at least one ■ Several models of CPUs
full-featured programmable logic control RS485 communication port with speeds – CPU221, 6in/4out 2Kw program
system offering stand-alone CPUs, up to 187.5Kbaud. This not only pro- – CPU222, 8in/6out 2Kw program
micro-modular expansion capability, and vides fast access for programming and – CPU224, 14in/10out 4Kw program
operator interface solutions. Almost any maintenance, but also allows you to – CPU226, 24in/16out 4Kw program,
application that requires automation, build master/slave networks with up to 2 communication ports
from basic discrete or analog control, to 31 stations. ■ Up to 256 digital I/O
intelligent networked solutions, can Up to 32 analog channels
benefit by using the powerful S7-200 Non-S7-200 devices, such as bar code ■

family of products. Here are just a few readers, intelligent machines, etc. can ■ 256 timers, 256 counters
examples of S7-200 applications: also be connected by using our ■ Built-in EEPROM memory
FreePort capability. With FreePort, you ■ Over 200 powerful instructions,
■ Conveyor systems can easily adapt the S7-200 CPU to vir- including math, PID, FOR/NEXT
■ Elevators tually any serial ASCII protocol. loops, Interrupts, Subroutines,
■ Woodworking machinery PROFIBUS-DP & AS-Interface Sequence Control, etc.
■ Packaging equipment Connections ■ Real-time clock/calendar
■ Placement systems The S7-200 can also be an intelligent ■ Built-in communications
■ Car wash automation slave on a PROFIBUS-DP network, or a ■ High-speed counters, pulse outputs,
■ Remote monitoring & control for host for an AS-Interface network, sim- interrupt inputs, timed interrupts
water/wastewater ply by adding expansion modules. This
provides a convenient way to use the ■ Password protection
■ Test stations S7-200 with larger PLC systems, or ■ Memory module
Value for OEMs intelligent field devices. ■ Removable I/O connectors
Wherever central controllers or expen- Easy Programming & Maintenance ■ Wide range of expansion modules
sive custom electronic control systems – 8 pt. Input & Output
are used, the SIMATIC S7-200 offers a With our STEP7-Micro/WIN software,
you have a complete development envi- – 4/4, 8/8, & 16/16 In/Out
significantly more economical alterna- Combination
tive. Our off-the-shelf, compact solution ronment for all phases of the applica-
tion including program development, – 4 ch. Analog In, 2 ch. Analog Out
is packed with features, and is accepted – 4 ch./1 ch. Analog In/Out
around the world as a Micro PLC documentation, and machine startup. If
you are familiar with Windows, then Combination
standard. – 2 ch. RTD In
you already know how to get started
Real-time Speed & Versatility with STEP7-Micro/WIN. – 4 ch. Thermocouple In
The SIMATIC S7-200 offers real-time – PROFIBUS-DP Slave
control with Boolean processing speeds – AS-Interface Master
of 0.37µs per instruction. This fast exe-
cution speed, combined with our 20Khz 10
high-speed counters, interrupts, and
20KHz pulse outputs, provide quick
responses in demanding real-time
Logic Control

applications. The S7-200 has over 200


instructions, including math, PID,
For/Next loops, subroutines, sequence
control, and more!

649
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General
CPU Selection Chart
Use this quick
selection guide to help
choose the proper
CPU for your
application.

Feature CPU 221 CPU 222 CPU 224 CPU 226


Physical Size of Unit 90 mm x 80 mm x 62 mm 90 mm x 80 mm x 62 mm 120.5 mm x 80 mm x 62 mm 190 mm x 80 mm x 62 mm
Memory
Program 2048 words 2048 words 4096 words 4096 words
User data 1024 words 1024 words 2560 words 2560 words
User program storage type EEPROM EEPROM EEPROM EEPROM
Data backup (super capacitor) 50 hours typical 50 hours typical 190 hours typical 190 hours typical
(optional battery) 200 days typical 200 days typical 200 days typical 200 days typical
Local I/O
Local I/O 6 In/4 Out 8 In/6 Out 14 In/10 Out 24 In/16 Out
Number of expansion modules none 2 modules 7 modules 7 modules
Total I/O
Digital I/O image size 256 256 256 256
(128 In/128 Out) (128 In/128 Out) (128 In/128 Out) (128 In/128 Out)
Analog I/O image size none 16 In/16 Out 32 In/32 Out 32 In/32 Out
Actual I/O count that can be realized with each CPU may be limited by image register size, module count, 5V power, and the physical number of I/O points on each product.
Refer to the User Manual for detailed information.
Instructions
Boolean execution speed 0.37∝s/ instruction 0.37 ∝s/ instruction 0.37 ∝s/ instruction 0.37 ∝s/ instruction
I/O Image Register 128 I and 128 Q 128 I and 128 Q 128 I and 128 Q 128 I and 128 Q
Internal relays 256 256 256 256
Counters/Timers 256/256 256/256 256/256 256/256
Word In/Word Out None 16/16 32/32 32/32
Sequential control relays 256 256 256 256
For/Next loops Yes Yes Yes Yes
Integer math (+ - * /) Yes Yes Yes Yes
Real math (+ - * /) Yes Yes Yes Yes
Enhanced Features
Built-in high-speed counter 4 H/W (20 KHz) 4 H/W (20 KHz) 6 H/W (20 KHz) 6 H/W (20 KHz)
Analog adjustments 1 1 2 2
Pulse outputs 2 (20 KHz, DC only) 2 (20 KHz, DC only) 2 (20 KHz, DC only) 2 (20 KHz, DC only)
Communication interrupts 1 transmit/2 receive 1 transmit/2 receive 1 transmit/2 receive 2 transmit/4 receive
Timed interrupts 2 (1 ms to 255 ms) 2 (1 ms to 255 ms) 2 (1 ms to 255 ms) 2 (1 ms to 255 ms)
Hardware input interrupts 4, input filter 4, input filter 4, input filter 4, input filter
Real-time clock Yes (cartridge) Yes (cartridge) Yes (built–in) Yes (built–in)
Password protection Yes Yes Yes Yes
Communications
Number of comm ports: 1 (RS485) 1 (RS485) 1 (RS485) 2 (RS485)
PPI, DP/T Baud rate up to 187.5Kbaud up to 187.5Kbaud up to 187.5Kbaud up to 187.5Kbaud
Freeport Baud rate up to 38.4Kbaud up to 38.4Kbaud up to 38.4Kbaud up to 38.4Kbaud
Protocols supported
Port 0: PPI, DP/T, Freeport PPI, DP/T, Freeport PPI, DP/T, Freeport PPI, DP/T, Freeport
Port 1: N/A N/A N/A PPI, DP/T, Freeport
Peer–to–peer Yes, NETR/NETW Yes, NETR/NETW Yes, NETR/NETW Yes, NETR/NETW

10
Logic Control

650
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC Technical/Dimensions
CPU Technical Specifications
DC Input Features
Input type Sink/Source (IEC Type 1 sink)
Input Voltage
Maximum continuous 30 VDC
Surge 35 VDC for 0.5 s
Rated value 24 VDC at 4 mA, nominal
Logic 1 signal (minimum) 15 VDC at 2.5 mA, minimum
Logic 0 signal (maximum) 5 VDC at 1 mA, maximum
Isolation (Field Side to Logic)
Optical isolation (galvanic) 500 VAC for 1 minute
Input Delay & HSC Rate
Filtered Inputs and Interrupts 0.2 to 12.8 ms, user–selectable
Single Phase HSC
Logic 1 Level = 15 to 30 VDC 20 kHz
Logic 1 Level = 15 to 26 VDC 30 kHz
Environmental Conditions Quadrature HSC
Storage Environment -40º to +70ºC, 25º to 55ºC 95% humidity Logic 1 Level = 15 to 30 VDC 10 kHz
Ambient Operating Environment 0º to 55º C horizontal mounting Logic 1 Level = 15 to 26 VDC 20 kHz
0º to 45º C vertical mounting 2–Wire Prox. Leakage 1 mA, maximum
95% non-condensing humidity, no corrosive gas Output Specifications DC Output Relay Output
Mechanical shock 15 G, 11 ms pulse, 6 shocks in each of 3 axes General
Sinusoidal vibration 0.30 mm peak-to-peak 10 to 57 Hz; 2 G panel mount, Output Type Solid State-MOSFET Relay, dry contact
1 G DIN rail mount, 57 Hz to 150 Hz; 10 sweeps each axis, Permissible range 20.4 to 28.8 VDC 5 - 30VDC or 5 - 250 VAC
1 octave/minute Rated value 24 VDC —
Mechanical Protection IP20 Logic 1 signal at max. current 20 VDC, minimum —
Logic 0 signal with 10 K Ω load 0.1 VDC, maximum —
Agency Approvals UL, CSA, FM, CE
Input Power Supply 24V DC Power 115/230V AC Power Output Current
Line voltage-permissible range 20.4 - 28.8 VDC 85 - 264 VAC, 47 - 63 Hz Logic 1 signal 0.75 A 2.00 A
Input current CPU only/max load 80/900 mA at 24 VDC 15/60 mA at 240 VAC Max. current per common/group
30/120 mA at 120 VAC CPU221 3.0 A 6.0 A
In-rush current (max) 10 A at 28.8 VDC 20 A at 264 VAC CPU222 4.5A 6.0 A
CPU224 3.75A 8.0 A
Isolation (input power to logic) Not isolated 1500 VAC
CPU226 6.0 A 10.0 A
Hold-up time (after power loss) 10 ms at 24 VDC 80 ms at 240 VAC,
Lamp load 5.0 W 30 W DC/200 W AC
20 ms at 120 VAC
ON state resistance (contact) 0.3 Ω 0.2 Ω, max. when new
Internal fuse, not replaceable 2 A, 250 V, Slow Blow 2 A, 250 V, Slow Blow Leakage current per point 10 µA, maximum —
24 VDC Sensor Power Output Surge current 8 A for 100 ms, max. 7 A w/ contacts closed
Voltage range 15.4 - 28.8 VDC 20.4 - 28.8 VDC Overload protection No No
Maximum current 180 mA 180 mA Isolation
Ripple noise Same as input line Less than 1 V p-p max. Optical isolation (galvanic) 500 VAC for 1 minute —
Current limit 600 mA 600 mA Isolation resistance — 100 M Ω, min. when new
Isolation (sensor power to logic) Non-isolated Non-isolated Isolation coil to contact — 1500 VAC for 1 minute
Isolation between open contacts — 750 VAC for 1 minute
Installation Dimensions Inductive Load Clamping
Repetitive Energy dissipation < 1 W, all channels —
Note: 0.5 LI2 x switch. rate
Panel mount or DIN rail Clamp voltage limits L+ minus 48 V —
possible (DIN EN50 022, Output Delay & Frequency
35mm). Unit height is Off to On (Q0.0 & Q0.1) 2 µs, maximum —
always 62mm (2.45 in). On to Off (Q0.0 & Q0.1) 10 µs, maximum —
Allow 75mm (3 in) from Off to On (Q0.2 & Q0.3) 15 µs, maximum —
surface for clearance. On to Off (Q0.2 & Q0.3) 100 µs, maximum —
Pulse Train Output (Q0.0 & Q0.1) 20 kHz, maximum 1 Hz, maximum
Relay Life
Switching delay — 10 ms, maximum
Lifetime mechanical (no load) — 10,000,000 open/close
Lifetime contacts at rated Load — 100,000 open/close

10
Product A B Product A B
CPU221 90mm 82mm Analog 71.2mm 63.2mm
(3.54in) (3.23in) Input (2.80in) (2.49in)
Logic Control

CPU222 90mm 82mm Analog 46mm 38mm


(3.54in) (3.23in) Output (1.81in) (1.5in)
CPU224 120.5mm 112.5mm Analog 71.2mm 63.2mm
(4.74in) (4.43in) Combo (2.80in) (2.49in)
CPU226 196mm 188mm RTD 71.2mm 63.2mm
(7.84in) (7.52in) (2.80in) (2.49in)
8pt 46mm 38mm Thermocouple 71.2mm 63.2mm
(1.81in) (1.5in) (2.80in) (2.49in)
8/8pt. 71.2mm 63.2mm PROFIBUS 71.2mm 63.2mm
(2.80in) (2.49in) (2.80in) (2.49in)
16/16pt. 137.3mm 129.3mm AS-Interface 71.2mm 63.2mm
(5.41in) (5.09in) (2.80in) (2.49in)

651
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General/Technical
Expansion I/O Modules
The S7-200 Micro PLC system can be
expanded to cover applications up to
256 I/O points by adding I/O expansion
modules. There are several types of
expansion modules:
• Discrete Input/Output
• Discrete Input/Output Combination
• Analog Input/Output
• Analog Input/Output Combination Module 5V ma Digital Digital Analog Analog
Inputs Outputs Inputs Outputs
• RTD/Thermocouple Input CPU 221 No expansion possible
• PROFIBUS-DP Slave CPU 222
• AS-Interface Master Max Digital In/Out
Modules can be added directly next to CPU +340 8 6
the CPU, or in an extended arrange- 2 x EM 223 DI16/DO16 x DC24V -320 32 32
or or
ment with a 0.8m Expansion Cable, 2 x EM 223 DI16/DO16 x DC24V/Rly -300
either with panel mounting or standard Total= >0 40 38
DIN rail mounting. Max Analog In
CPU +340 8 6
2 x EM 235 AI4/AQ1 -60 8 2
Maximum Configurations Total= >0 8 6 8 2
As shown in the CPU selection guide, Max Analog Out
there is a maximum number of expan- CPU +340 8 6
2 x EM 232 AQ2 -40 0 4
sion modules that can be connected to
Total= >0 8 6 0 4
any given CPU. Another item to consid-
CPU 224
er is the available power budget. Each
Max Digital In/Rly Out
expansion module consumes +5V DC CPU +660 14 10
power from the CPU I/O bus, so this 4 x EM 223 DI16/DO16 x DC24V/Rly -600 64 64
can determine the maximum I/O config- 2 x EM 221 DI8 x DC24V -60 16
uration as well. The tables show the Total= >0 94 74
power budget and maximum I/O config- Max Digital In/DC Out
urations for the S7-200 Micro PLC sys- CPU +660 14 10
4 x EM 223 DI16/DO16 x DC24V -640 64 64
tem.
Total= >0 78 74

CPU 22x Expansion Module Digital In/Max Rly Out


5VDC Current 5VDC Current Consumption - mA CPU +660 14 10
4 x EM 223 DI16/DO16 x DC24V/Rly -600 64 64
CPU 222 340 EM 221 DI8 x DC24V 30 1 x EM 222 DO8 x Rly -40 8
CPU 224 660 EM 222 DO8 x DC24V 50 Total= >0 78 82
CPU 226 1000 EM 222 DO8 x Rly 40
CPU 226
EM 223 DI4/DO4 x DC24V 40
Max Digital In/Rly Out
EM 223 DI4/DO4 x DC24V/Rly 40
CPU +1000 24 16
EM 223 DI8/DO8 x DC24V 80 6 x EM 223 DI16/DO16 x DC24V/Rly -900 96 96
EM 223 DI8/DO8 x DC24V/Rly 80 1 x EM 223 DI8/DO8 x DC24V/Rly -80 8 8
EM 223 DI16/DO16 x DC24V 160 Total= >0 128 120
EM 223 DI16/DO16 x DC24V/Rly 150
Max Digital In/DC Out
EM 231 AI4 x 12 Bit 20 CPU +1000 24 16
EM 231 AI4 x Thermocouple 60 6 x EM 223 DI16/DO16 x DC24V -960 96 96
EM 231 AI4 x RTD 60 1 x EM 221 DI8 x DC24V -30 8
EM 232 AQ2 x 12 Bit 20 Total= >0 128 112
EM 235 AI4I/AQ1 x 12 Bit 30 CPU 224 or CPU 226
EM 277 PROFIBUS-DP 150
10 Max Analog In
CPU >660 14 (24) 10 (16)
7 x EM 235 AI4/AQ1 -210 28 7
Total= >0 14 (24) 10 (16) 28 7
Max Analog Out
Logic Control

CPU >660 14 (24) 10 (16)


7 x EM 232 AQ2 -140 0 14
Total= >0 14 (24) 10 (16) 0 14

652
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC Technical
Discrete I/O Module Specifications
There are a wide range of discrete Discrete Output Module Specifications
input, discrete output, and discrete Output Specifications DC Output Relay Output
combination expansion modules avail- General
able in the S7-200 Micro PLC family. Output type Solid State-MOSFET Relay, dry contact
Permissible range 20.4 to 28.8 VDC 5-30VDC or 5-250 VAC
Regardless of the combination of Rated value 24 VDC —
points, the modules all share the same Logic 1 signal at max. current 20 VDC, minimum —
basic characteristics. Logic 0 signal with 10 K Ω load 0.1 VDC, maximum —
Output Current
Discrete Input Module Specifications Logic 1 Signal 0.75 A 2.00 A
Max. current per common/group 3A 8A
DC Input Features
Lamp load 5.0 W 30 W DC/200 W AC
Input type Sink/Source (IEC Type 1 sink) ON state resistance (contact) 0.3Ω 0.2 Ω, max. when new
Input Voltage Leakage current per point 10µA, maximum —
Maximum continuous 30 VDC Surge current 8 A for 100 ms, max. 7 A w/contacts closed
Surge 35 VDC for 0.5 s Overload protection No No
Rated value 24 VDC at 4 mA, nominal Isolation
Logic 1 signal (minimum) 15 VDC at 2.5 mA, minimum Optical isolation (galvanic) 500 VAC for 1 minute —
Logic 0 signal (maximum) 5 VDC at 1 mA, maximum Isolation resistance — 100 M Ω, min. when new
Isolation (Field Side to Logic) Optical (galvanic), Isolation coil to contact — 1500 VAC for 1 minute
500 VAC for 1 minute Isolation between open contacts — 750 VAC for 1 minute
Input Delay Times 4.5 ms
Inductive Load Clamping
2–Wire Prox. Leakage 1 mA, maximum
Repetitive Energy Dissipation < 1 W, all channels —
0.5 LI 2 x switch. rate
Clamp voltage limits L+ minus 48 V —
Output Delay
Off to On 50 µs, max. —
On to Off 200µs, max. —
Relay Life
Switching delay — 10 ms, maximum
Lifetime mechanical (no load) — 10,000,000 open/close
Lifetime contacts at rated Load — 100,000 open/close

The following chart shows typical performance data supplied by relay vendors.
Actual performance may vary depending upon your specific application.

10
Logic Control

653
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC Technical
Analog I/O Module Specifications
Analog I/O modules are used in a wide
variety of applications to measure
current or voltage changes.
Description EM 231 AI4 x 12 Bit EM 232 AQ2 x 12 Bit EM 235 AI4/AQ1 x 12 Bit
General Specifications
Power Consumption
From +5 VDC (I/O bus) 20 mA 20 mA 30 mA
From L+ 60mA 70 mA (both outputs at 20 mA) 60 mA (with output at 20 mA)
L+ voltage range, Class 2 or DC sensor supply 20.4 to 28.8 20.4 to 28.8 20.4 to 28.8
LED indicator 24 VDC Power Supply Good, 24 VDC Power Supply Good, 24 VDC Power Supply Good,
ON = no fault, ON = no fault, ON = no fault,
OFF = no 24 VDC Power OFF = no 24 VDC Power OFF = no 24 VDC Power
Analog Input Specifications
Data word format
Bipolar, full-scale range -32000 to +32000 -32000 to +32000
Unipolar, full-scale range 0 to 32000 0 to 32000
Input impedance ≥10 MΩ ≥ 10 MW
Input filter attenuation -3 db @ 3.1 Khz -3 db @ 3.1 Khz
Maximum input voltage 30 VDC 30 VDC
Maximum input current 32 mA 32 mA
Resolution 12 bit A/D converter 12 bit A/D converter
No. of Analog Input Points 4 4
Isolation (Field side to logic) None None
Input type Differential Differential
Input ranges
Voltage (unipolar) 0 to 10 V, 0 to 5 V, 0 to 10 V, 0 to 5 V,
0 to 1 V, 0 to 500 mV,
0 to 100 mV, 0 to 50 mV
Voltage (bipolar) ±5 V, ± 2.5 V ± 10 V, ± 5 V, ± 2.5 V,
± 1 V, ± 500 mV,
± 250 mV, ± 100 mV,
± 50 mV, ± 25 mV
Current 0 to 20 mA 0 to 20 mA
Analog to digital conv. time < 250 ∝s < 250 ∝s
Analog input step response 1.5 ms to 95% 1.5 ms to 95%
Common mode rejection 40 dB, DC to 60 Hz 40 dB, DC to 60 Hz
Common mode voltage Signal voltage plus Signal voltage plus
common mode voltage common mode voltage
(must be ≤ 12 V) (must be ≤ 12 V)
Analog Output Specifications
Isolation (Field side to logic) None None
Signal range
Voltage output ± 10 V ± 10 V
Current output 0 to 20 mA 0 to 20 mA
Resolution, full–scale
Voltage 12 bits 12 bits
Current 11 bits 11 bits
Data word format
Voltage -32000 to +32000 -32000 to +32000
Current 0 to +32000 0 to +32000
Accuracy
Worst case, 0º to 55º C
10 Voltage output ± 2% of full-scale ± 2% of full-scale
Current output ± 2% of full-scale ± 2% of full-scale
Typical, 25º C
Voltage output ± 0.5% of full-scale ± 0.5% of full-scale
Current output ± 0.5% of full-scale ± 0.5% of full-scale
Logic Control

Settling time
Voltage output 100 µS 100 µS
Current output 2 mS 2 mS
Maximum drive
Voltage output 5000 Ω min. 5000 Ω min.
Current output 500 Ω max. 500 Ω max.

654
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General/Technical
RTD & Thermocouple Module Specifications
The RTD & Thermocouple modules are Description EM 231 AI 4 x Thermocouple EM 231 AI 2 x RTD
most often used in applications General Specifications
involving temperature control. Power Consumption
From +5 VDC (I/O bus) 87 mA 87 mA
From L+ 60 mA 60 mA
Thermocouple Module L+ voltage range, Class 2 20.4 to 28.8 VDC 20.4 to 28.8 VDC
or DC sensor supply
The EM 231 Thermocouple module pro- LED indicator 24 VDC Power Supply Good 24 VDC Power Supply Good
vides a convenient, isolated interface ON = no fault ON = no fault
for the S7–200 family to seven thermo- OFF = no 24 VDC power OFF = no 24 VDC power
SF SF
couple types: J, K, E, N, S, T, and R. It
ON = module failure ON = module failure
also allows the S7–200 to monitor low BLINKING = input signal error BLINKING = input signal error
level analog signals, in the 80mV range. OFF = no faults OFF = no faults
The module has DIP switches to select Analog Input Specifications
the thermocouple type, open wire Isolation
check, temperature scale, cold junction Field side to logic 500 VAC 500 VAC
Field side to 24 VDC 500 VAC 500 VAC
compensation and burnout direction. All 24 VDC to logic 500 VAC 500 VAC
thermocouples attached to the module Common mode input range 120 VAC (input channel to channel) 0
must be of the same type. The EM 231 Common mode rejection > 120 dB @ 120 VAC > 120 dB @ 120 VAC
Thermocouple module can report tem- Input type Floating TC Module ground referenced RTD
peratures in Celsius or Fahrenheit. Input ranges TC types (select one): S, T, R, E, N, K, J RTD types (select one):
Voltage range: +/- 80 mV Pt -100Ω, 200Ω, 500Ω, 1000Ω
(with α = 3850 ppm, 3920 ppm, 3850.55 ppm,
3916 ppm, 3902 ppm)
RTD Module Pt -10000Ω (α = 3850 ppm)
The EM 231 RTD module provides a Cu -9.035Ω (α = 4720 ppm)
convenient interface for the S7–200 Ni -10Ω, 120Ω, 1000Ω
(with α = 6720 ppm, 6178 ppm)
family to several different RTDs. It also R -150Ω, 300Ω, 600Ω FS
allows the S7–200 to measure three dif- Input Resolution
ferent resistance ranges. You use DIP Temperature 0.1º C / 0.1º F 0.1º C / 0.1º F
switches to select RTD type, wiring Voltage 15 bits plus sign
configuration, temperature scale, and Resistance 15 bits plus sign
Measuring Principle Sigma–delta Sigma–delta
burnout direction. Both RTDs attached to
Module update time: All ch. 405 ms 405 ms (700 ms for Pt10000)
the module must be of the same type. Wire length 100 meters to sensor max 100 meters to sensor max
Wire loop resistance 100Ω max 20Ω, 2.7Ω for Cu max
Suppression of interference 85 dB @ 50 Hz/60 Hz/400 Hz 85 dB @ 50 Hz/60 Hz/400 Hz
Data word format Voltage: -27648 to + 27648 Resistance: -27648 to +27648
Maximum sensor dis. 1m W
Input impedance >1 MΩ >10 MΩ
Maximum input voltage 30 VDC 30 VDC (sense), 5 VDC (source)
Resolution 15 bit + sign 15 bit + sign
Input filter attenuation -3 dB @ 21 kHZ -3 dB @ 3.6 kHz
Basic error 0.1% FS (voltage) 0.1% FS (resistance)
Repeatability 0.05% FS 0.05% FS
Cold junction error ±1.5º C

10
Logic Control

655
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General/Technical
Communications
The S7-200 Micro PLC system provides
a wide range of communication choices
which allow connections to:
■ Personal computers for programming
and monitoring
■ Operator panels
■ PROFIBUS-DP networks
■ AS-Interface networks
■ Other intelligent devices

CPU Port Protocols


The S7-200 CPU ports support several
protocols:
■ PPI – proprietary master/slave proto-
col, up to 187.5Kbaud, most often
used for programming, building net-
works of S7-200 CPUs, or to connect
operator interfaces.
■ MPI – proprietary protocol, up to
187.5Kbaud, most often used by the
S7-300/400 CPUs and other SIMATIC
devices, to communicate with the S7-
200 CPUs. When a S7-200 CPU is
communicating to a MPI master it
cannot be a PPI Master.
■ FreePort – a mode of operation
through which the CPU program can
literally define the protocol of the
CPU communications port, most
often used to connect other intelli-
gent devices that support a serial
ASCII protocol at speeds up to
38.4Kbaud.
AS-Interface Expansion
Module
The CP243-2 is the AS-Interface Master
for the S7-200 Micro PLC system. By
using AS-Interface, you can dramatically
reduce the wiring costs in almost any
The CP243-2 can be used in two oper- outputs) may be addressed via the 8
application. (Refer to the AS-Interface
ating modes: AI/AO area.
section of this catalog for additional
information on AS-Interface.) ■ Standard mode – Only the data bits ■ Extended mode – The CP243-2
of the slaves may be addressed in offers access to master calls in accor-
When bi-directional slaves are imple- dance with AS-Interface specification
this operating mode. No master calls
mented, up to 248 binary elements can V2.0 (i.e. writing parameters).
are executed. Up to 248
be activated via 31 AS-Interface slaves
Input/Outputs (Max. 124 inputs & 124
10 which significantly increase the I/O
capacity of an S7-200 system. The CP243-2 Specifications
CP243-2 features:
AS-Interface master profile M0e (appropriate Complete AS-Interface Specification V2.0)
■ a terminal block for direct connection AS-Interface update cycle 5 ms for 31 slaves
Logic Control

of the AS-Interface cable Interfaces


Allocation of address area in PLC 2 I/O modules (DI/8 DO8 and AI/8/AQ8)
■ front panel LEDs for displaying the Connection to AS-Interface Terminal connection
operating state as well as the con- Power consumption
nected and activated slaves and their via AS-Interface 100 mA, max.
availability via backplane bus 220 mA at DC 5 V, typically
Power loss 2 W, approximately
■ one pushbutton for changing the Environmental conditions
operating states and the status/slave Operating temperature
display as well as accepting the exist- horizontal mounting 0º C to +55º C
ing configuration vertical mounting 0º C to +45º C
Transport/storage temperature -40º C to +70º C
Relative humidity 95% at +25º C

656
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General/Technical
PROFIBUS-DP Slave Module
The PROFIBUS-DP module is an
extremely versatile communications
module. It can be used to connect:
■ an S7-200 CPU (as a slave) to a
PROFIBUS-DP network
■ other peripherals capable of being an
MPI master

Unlike many DP devices, the EM 277


module does not transfer only I/O data.
The EM 277 moves data to and from a
block of variable memory defined in the
S7–200 CPU. This allows you to
exchange any type of data with the
master (inputs, counter values, timer
values, data memory, etc.).

The EM 277 can also be used as a com-


munication interface to other MPI mas-
ters, whether or not it is being used as
a PROFIBUS-DP slave. Example con-
nections are:
■ S7–300/400 to the S7–200 using the
PROFIBUS-DP Example with other MPI
XGET/XPUT masters present.
■ STEP 7-Micro/WIN and a network

card (such as the CP5511) for pro-


gramming, monitoring, etc. Description EM 277 PROFIBUS-DP
■ TD200 or TP070 operator interface Communication Features
panels. Number of Ports 1 port
Electrical interface RS-485
A maximum of six connections Isolation (external signal to PLC logic) 500 VAC (Galvanic)
(devices) are allowed; one connection is PROFIBUS-DP/MPI baud rates (set automatically) 9.6, 19.2, 45.45, 93.75, 187.5, and 500K baud; 1, 1.5, 3, 6,
reserved for a programming device and and12M baud
one is reserved for an operator panel. Protocols PROFIBUS-DP slave and MPI slave
Cable Length
The other four connections can be used Up to 93.75K baud 1200 m
by any MPI master. In order for the 187.5K baud 1000 m
module to communicate with multiple 500K baud 400 m
masters, all masters must be operating 1 to 1.5M baud 200 m
3 to 12M baud 100 m
at the same baud rate. There are limita- Network Capabilities
tions including: Station address settings 0 - 99 (set by rotary switches)
Maximum stations per segment 32
■ cannot be used for communication Maximum stations per network 126, up to 99 EM277 stations
between S7–200 PLCs using MPI Connections 6 total, 2 reserved (1 for PG and 1 for OP)
NETR/NETW. Power Requirements
■ cannot be used for FreePort commu- Power Consumption
+5 VDC (from I/O bus) 150 mA
nication 24 VDC Input Power Requirements
Voltage range 20.4 to 28.8 VDC (Class 2 or sensor power from PLC)
Maximum current
Module only with port active 30 mA
Add 90 mA of 5V port load 60 mA
10
Add 120 mA of 24V port load 180 mA
Ripple noise (<10 MHz) <1 V peak to peak (maximum)
Isolated (input power to module logic) 500 VAC for 1 minute
5 VDC Power on Communication Port
Logic Control

Maximum current per port 90 mA


Transformer isolation from module logic and from 500 VAC for 1 minute
24 VDC input power
24 VDC Power on Communication Port
Voltage range 20.4 to 28.8 VDC
Maximum current per port 120 mA
Current limit 0.7 to 2.4 A
Isolated Not isolated, same circuit as input 24 VDC

657
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General/Technical
Operator Panels
TD200 Text Display TD200 Specifications
The TD200 text display is the Dimensions
perfect choice for simple text Front panel (h x w x d) 76 x 148 x 28 mm (3 x 5.8 x 1.1 in.)
display and offers: Panel cutout (h x w) 68 x 138 mm (2.7 x 5.44 in.)
Display STN-Graphic Display with LED back-lighting
■ 2-line x 20 character back-lit Keyboard Membrane keypad / 9 keys / Tab inserts for
LCD display customer specific labeling
CPU Interface RS 485 (PPI); 9.6 / 19.2 / 187.5 Kbits/s
■ 8 function keys, with removable label panel Supply voltage 24VDC, (15VDC...30VDC, safety extra low voltage,
■ up to 80 messages, all stored in the S7-200 CPU supplied by PLC, mains adapter, or a 24VDC external supply)
Current consumption typ. 70 mA, (terminating resistors switched off),
■ up to four embedded variables per message max. 120 mA at UN 24V (2A fuse in TD 200)
■ Allows adjustment of designated program variables Inrush current Max. 0.6A / 15ms
Temperature / Humidity
■ Ability to force/unforce I/O points operation 0º to 60º C / 5% - 85% non-condensing at 30º C
■ Ability to set time and date for CPU real-time clock storage -20º to 70º C / 5%-93% non-condensing at 40º C
Degree of protection IP65 (panel mount with gasket), IP20 rear
■ Menus and prompts in six languages (English, German, Agency approvals UL, CSA, FM, CE
French, Spanish, Italian, and Chinese) Configuration STPE7-Micro/WIN32 V3.1 or later
■ Multiple character sets to support English, Western

European, Slavic, and Chinese languages


■ Easy, step-by-step message configuration with STEP7-

Micro/WIN wizard
The TD 200 communicates at up to 187.5Kbaud and functions
as a network master when it is connected to one or more S7-
200 CPUs. The TD 200 is also designed to operate with other
masters in a network. Multiple TD 200s can be used with one
or more S7-200 CPUs connected to the same network.

TP070 Touch Panel TP070 Specifications


For touch applications the TP070 offers a very economical Dimensions
solution. Front panel (w x h) 221 x 156mm (8.7 x 6.2 in.)
Panel cutout (w x h x d) 198 x 142 x 45mm (7.8 x 5.6 x 1.8 in.)
■ 5.7" blue-mode display Display STN, CCFL backlit
■ Connection to one S7-200 MTBF 50,000 hours, display and background
CPU only at 19.2Kbaud Resolution 320 x 240
Screen area 5.7" blue mode
■ Input / Output fields Keyboard Touch (analog resistive, 1 million operations)
■ State buttons (setting PLC User Memory Flash, 128Kb
Clock Yes, no battery, auto compare with S7-200 clock
bits, changing screens, CPU Interface RS 485 MPI at 19.2Kbaud, one CPU only
online/offline, etc.) Supply voltage 24VDC, (18 to 30 VDC)
■ Overlay bit map graphics on Current consumption typ. 200 mA, at 24V
Inrush current Max. 0.6A / 15ms
buttons to show different on/off images Temperature
■ Fixed text up to 2.4cm (0.9in) in height installed vertical 0º to 50º C
installed 35º angle 0º to 40º C
storage -20º to 60º C
In general, TP070 projects can contain: humidity / air <85%, non-condensing / no corrosive gases
Degree of protection IP65 (panel mount with gasket), IP20 rear
■ 10 graphic images per project Agency approvals UL, CSA, FM, CE
■ 30 screens per project Configuration STEP7-Micro/WIN TP Designer (presently included in
the STEP7-Micro/WIN Toolbox)
■ 64 tags
■ 10 tags per screen
■ 30 controls per screen
10 ■ 3 bar graphs per screen
■ 100 text strings per project
Logic Control

The TP070 screens are configured with the easy-to-use


STEP7-Micro/WIN TP Designer software. This software is
included in the STEP7-Micro/WIN V1.0 Toolbox.

658
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC General
Software
STEP7-Micro/WIN32 V3.1 Windows Look & Feel
Programming Software
Programming and maintenance for the S7-200 Micro PLC is
made easy with our inexpensive STEP7-Micro/WIN32 pro-
gramming software. This powerful software is very easy to
learn, but also offers several features that make it easy to
solve even the most difficult automation applications. STEP7-
Micro/WIN32 offers:
■ The power of Windows, with the easy-to-learn look and feel
of common office applications
■ IEC-1131 compliance
■ Flexible editor choices to suit most any programming pref-
erence; STL, Ladder, and Function Block Diagram
■ Simple and straightforward program structure
■ Symbolic programming, with address and symbol visible
simultaneously
■ Fast editing with a convenient instruction browser and drag
& drop, double-click, or function key placement
■ The ability to create your own custom “instructions” by
building reusable subroutines and interrupt routines.
■ Complete documentation and printing capabilities
■ Powerful tools for startup and debugging including on-line
status, multiple status charts (with name), memory forcing, Flexible Viewing Options
program download during run mode (selected CPUs)
■ Comprehensive on-line help
■ On-line user manuals for the complete S7-200 family of PLC
products

STEP7-Micro/WIN32 is a true 32-bit application that runs


under Windows 95, Windows 98, or Windows NT V4.0.
Hardware that provides acceptable operating performance for
these operating systems is recommended. We recommend a
minimum of an 80386DX processor or higher, 8MB RAM and
10MB free space on the hard disk. A PC/PPI cable or MPI
card is required for communication with an S7-200 CPU.

STEP7-Micro/WIN Toolbox V1.0


The introductory version of this optional software package
contains:
TP Designer Software for TP070
■ TP Designer Software
■ USS Protocol Instructions

The TP Designer software is used to configure the TP070


Touch Panel display screens. This package provides “what you
see is what you get” look at the TP screens as you build them.
If you’re using an S7-200 CPU with a MicroMaster drive, then 10
our USS Protocol Instructions can dramatically reduce your
program development time. These new instructions are
designed to both control the drive and read/write drive para-
Logic Control

meters.

659
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC Selection
S7-200 Ordering Information
Model Description Catalog No Price $
CPUs
CPU 221 24 VDC Power Supply, 6 x 24 VDC Inputs, 4 x 24 VDC Outputs 6ES72110AA210XB0 180.
120/220 VAC Power Supply, 6 x 24 VDC Inputs, 4 x Relay Outputs 6ES72110BA210XB0 190.
CPU 222 24 VDC Power Supply, 8 x 24 VDC Inputs, 6 x 24 VDC Outputs 6ES72121AB210XB0 230.
120/220 VAC Power Supply, 8 x 24 VDC Input, 6 x Relay Outputs 6ES72121BB210XB0 250.
CPU 224 24 V DC Power Supply, 14 x 24 VDC Inputs, 10 x 24 VDC Outputs 6ES72141AD210XB0 330.
120/220 VAC Power Supply, 14 x 24 VDC Input, 10 x Relay Outputs 6ES72141BD210XB0 350.
CPU 226 24 V DC Power Supply, 24 x 24 VDC Inputs, 16 x 24 VDC Outputs 6ES72162AD210XB0 555.
120/220 VAC Power Supply, 24 x 24 VDC Input, 16 x Relay Outputs 6ES72162BD210XB0 590.
Starter Kits Includes CPU, STEP7-Micro/WIN 32, S7-200 System Manual,
Input Simulator, PC/PPI Cable, and promotional screwdriver.
S7-221 AC/DC/RLY Starter Kit 6ES72980AA300BA0T 399.
S7-221 DC/DC/DC Starter Kit 6ES72980AA350BA0T 399.
S7-222 AC/DC/RLY Starter Kit 6ES72980AA310BA0T 499.
S7-222 DC/DC/DC Starter Kit 6ES72980AA360BA0T 499.
S7-224 AC/DC/RLY Starter Kit 6ES72980AA320BA0T 599.
S7-224 DC/DC/DC Starter Kit 6ES72980AA370BA0T 599.
S7-226 AC/DC/RLY Starter Kit 6ES72980AA330BA0T 799.
S7-226 DC/DC/DC Starter Kit 6ES72980AA380BA0T 799.
Digital Expansion
EM 221 Input 8 Points, 24 VDC Digital Input Module 6ES72211BF200XA0 90.
EM 222 Output 8 Points, 24 VDC Digital Output Module, 6ES72221BF200XA0 100.
8 Points, Relay Output Module 6ES72221HF200XA0 125.
EM 223 Combination 4 x 24 V DC Input and 4 x 24 V DC Outputs 6ES72231BF200XA0 135.
4 x 24 V DC Input and 4 x Relay Outputs 6ES72231HF200XA0 135.
8 x 24 V DC Input and 8 x 24 V DC Outputs 6ES72231BH210XA0 170.
8 x 24 V DC Input and 8 x Relay Outputs 6ES72231PH210XA0 180.
16 x 24 V DC Input and 16 x 24 V DC Outputs 6ES72231BL210XA0 320.
16 x 24 V DC Input and 16 x Relay Outputs 6ES72231PL210XA0 350.
Analog Expansion
EM231 Input 4 Input points, 12 Bit Resolution, 0-5V, 0-10V, +/-2.5 / 5V, or 0 to 20 mA 6ES72310HC200XA0 195.
EM232 Output 2 Output points, 12 Bit Resolution, +/-10V or 0 to 20 mA 6ES72320HB200XA0 185.
EM235 Combination 4 Input points & 1 output point 6ES72350KD200XA0 250.
Inputs, 12-bit resolution, 0-50/100/500/100Mv, +/-25/50/100/250/500mV,
0-5V, 0-10V, 0 to 20 mA, +/-2.5 / 5V, or +/-1/10V ranges
Outputs, 12-bit Resolution, +/- 10 volts or 0 to 20 mA ranges
EM231 RTD Input 2 Input, Resistance Temperature Detector (RTD) 6ES72317PB200XA0 250.
EM231 T/C Input 4 Input, Thermocouple (T/C) 6ES72317PD200XA0 250.
Communications
EM277 PROFIBUS-DP PROFIBUS-DP Slave Module, 1 Port, 9.6 Kb to 12 Mb rates, 0 to 99 stations 6ES72770AA200XA0 225.
(Requires CPUs with firmware Release 1.1 or later, see above part numbers)
CP242-2 Communications Processor for connecting above listed CPUs to AS-Interface 6GK72432AX000XA0 505.
Software
STEP-7 Micro/WIN 32 STEP 7 Micro/WIN 32 V3.1 Single License, on CD 6ES78102BC010YX0 295.
STEP 7 Micro/WIN 32 V3.1 Upgrade License, on CD 6ES78102BC010YX3 150.
STEP 7-Micro/WIN32 Toolbox V1.0 Single License, on CD 6ES78102TC010YX0 99.

10
Logic Control

660
Siemens Industrial Control Products
SIMATIC S7-200 Micro PLC Selection
S7-200 Ordering Information
Model Description Catalog No Price $
Operator Interfaces
TD200 Text Display 2-line x 20 character LCD display with 8 function keys. Includes cable. 6ES72720AA200YA0 250.
Powered from CPU, optional external supply available.
Optional TD200 Power Supply External Power Supply 120 VAC/24VDC for TD200. Required only when 6ES77050AA001BA0 70.
the cable distance from PLC is greater than 8.2 ft (2.5m)
TP070 Touch Panel Touch panel with 5.7" STN blue mode display. Requires external 24V power source. 6AV65450AA152AX0 495.
(SITOP or LOGO! power recommended.) Requires PPI cable for download of configuration
from PC, and MPI cable for connection to CPU.
TP070 Protective Membrane Protective Membranes for the TP070 display (pack of 10) 6AV65741AD004AX0 115.
Memory Cards
MC 291 EEPROM Optional Memory Transfer Cartridge, EEPROM for the S7-22x CPU Units 6ES72918GE200XA0 30.
(Useful for transfer of the user Program Logic and the V-Memory)
MC 297 Clock/Calendar Cartridge Optional Time of Day Clock/Calendar Cartridge, including 200 day Battery Backup for S7-22x CPU’s 6ES72971AA200XA0 45.
Battery Cartridge Battery Cartridge for S7-22x CPUs. Extends data memory backup (200 days) beyond normal super 6ES72918BA200XA0 30.
cap holdup during power outage
Manuals
S7-200 Manual SIMATIC S7-200 System Manual for 22x CPUs & I/O (not 1st Gen S7-200) 6ES72988FA218BH0 35.
TD200 Manual TD200 User Manual 6ES72720AA208BA0 35.
TP070 Manual TP070 User Manual 6AV65911DC010AB0 35.
Cables
PC/PPI Cable Isolated PC/PPI Cable, 5m, converts RS232 (from PC) to RS485 (S7-200 CPU) 6ES79013BF200XA0 120.
MPI Cable MPI Cable, 5m, used to connect TP070 to S7-200 CPU 6ES79011BF000XA0 32.
I/O Expansion Cable 22x CPU and I/O Bus expansion Cable, 0.8m. Only required when placing expansion 6ES72906AA200XA0 60.
modules non-adjacent to the CPU.
Accessories
SIM 274 8 Input Simulator Switches, for DC Inputs ONLY 6ES72741XF000XA0 110.
Input Simulators 14 Input Simulator Switches, for DC Inputs ONLY 6ES72741XH000XA0 140.
24 Input Simulator Switches, for DC Inputs ONLY 6ES72741XK000XA0 210.
SP1 Doors & Labels – 4 each, doors and Labels for 22x CPUs and Expansion I/O 6ES72913AX200XA0 50.
SP2 8pt. Connectors – 4 connectors for 8pt. I/O expansion modules 6ES72921AD200AA0 20.
SP3 16pt. Connectors – 4 connectors for 16pt. I/O expansion modules 6ES72921AE200AA0 20.
SP4 224 CPU Connectors – 4 connectors for 224 CPU 6ES72921AG200AA0 20.
PROFIBUS Connectors PROFIBUS connectors are also used with S7-200 for building custom cables
(CPU networks, CPU to operator interface, etc.)
90 degree cable outlet without programming port 6ES79720BA110XA0 45.
90 degree cable outlet with programming port 6ES79720BB110XA0 60.
90 degree cable outlet without programming port, fast connect capable 6ES79720BA500XA0 45.
90 degree cable outlet with programming port, fast connect capable 6ES79720BB500XA0 60.
35 degree cable outlet without programming port 6ES79720BA400XA0 45.
35 degree cable outlet with programming port 6ES79720BB400XA0 60.

Questions? Try our Microsystems Hotline 1-800-333-7421

10
Logic Control

661
Siemens Industrial Control Products

You might also like