OWNER'S MANUAL

DVD Receiver System

Please read this manual carefully before operating
your set and retain it for future reference.

MODEL
MDD64 (MDD64-A0U, MDS64V)
MDD104 (MDD104-A0U, MDS104V)
MDT354 (MDT354-A0U, MDS354V/W)
RDD264 (RDD264-A0U, RDS264V)

P/NO : MFL42956184

MDD64-A0U_BPHLLL ENG 6184.indd 1 2011-04-15 �� 3:24:45

 Safety Precaution
CAUTION CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
RISK OF ELECTRIC SHOCK
DO NOT OPEN CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; That is, a
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE single outlet circuit which powers only that appliance and has no additional outlets or
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING branch circuits. Check the specification page of this owner's manual to be certain.
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
intended to alert the user to the presence of uninsulated dangerous voltage extension cords, frayed power cords, or damaged or cracked wire insulation are
within the product’s enclosure that may be of sufficient magnitude to consti- dangerous. Any of these conditions could result in electric shock or fire. Periodically
tute a risk of electric shock to persons. examine the cord of your appliance, and if its appearance indicates damage or dete-
rioration, unplug it, discontinue use of the appliance, and have the cord replaced with
The exclamation point within an equilateral triangle is intended to alert the an exact replacement part by an authorized service center.
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product. Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT wall outlets, and the point where the cord exits the appliance.
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. To disconnect power from the mains, pull out the mains cord plug. When installing the
WARNING: Do not install this equipment in a confined space such as a book case or product, ensure that the plug is easily accessible.
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. This device is equipped with a portable battery or accumulator.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable Safe way to remove the battery or the battery from the equipment:
operation of the product and to protect it from over heating. The openings shall be Remove the old battery pack, follow the steps in reverse order than the assembly.
never be blocked by placing the product on a bed, sofa, rug or other similar surface. To prevent contamination of the environment and bring on possible threat to human
This product shall not be placed in a built-in installation such as a bookcase or rack and animal health, the old battery or the battery put in the appropriate container at
unless proper ventilation is provided or the manufacturer's instruction has been designated collection points. Do not dispose of batteries or battery together with other
adhered to. waste. It is recommended that you use local, free reimburse ment system batteries
and accumulators. The battery shall not be exposed to excessive heat such as
sunshine, fire or the like.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

MDD64-A0U_BPHLLL ENG 6184.indd 2 2011-04-15 �� 3:24:45

 Contents

Safety Precaution 2 Recording to USB 17

Contents 3 Recording to TAPE 18
Synchronized Recording from CD to Tape 18
Setting up 4
Hooking up the unit 5 Language Codes 19
Main unit 6 Area Codes 19
Remote control 7 Troubleshooting 20
OSD Initial language setting - Optional 8 Types of Playable Discs 21
Initial Setting the Area Code 8 Specifications 22
Adjust the general settings 8-10
Setting the sound mode 10
Enjoying a pre-programmed sound field 11
Setting the clock 11

Displaying Disc Information 12

Playing a Disc 12-14
Viewing photo files 14
Listening to the radio 15
Listening to the cassette tapes 15
Listening to music from your external device 16
Using an USB device 16

MDD64-A0U_BPHLLL ENG 6184.indd 3 2011-04-15 �� 3:24:45

 Setting up
Be careful of the following
Attaching the speakers to the unit •B e careful to make sure children not to put their hands or any objects into the
Connect the black end of each wire to the terminals marked - (minus) and the *speaker duct.
other end to the terminals marked + (plus). * Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).
To connect the cable to the each speakers, press each plastic finger pad to
open the connection terminals on the back of each speaker. Insert the wire and
release the finger pad.

MDT354 (2.1 channel)

COLOUR SPEAKER POSITION

Red Front In front of you, to the right of the screen.

White Front In front of you, to the left of the screen.

Orange Sub Woofer This can be placed in any front position.

MDD64/MDD104/RDD264 (2 channel)
COLOUR SPEAKER POSITION
Red Front In front of you, to the right of the screen.

White Front In front of you, to the left of the screen.

MDD64-A0U_BPHLLL ENG 6184.indd 4 2011-04-15 �� 3:24:46

 Hooking up the unit

VIDEO OUT jack connection

Connect the VIDEO OUT jack on the unit COMPONENT VIDEO OUT
to the corresponding input jacks on your TV (PROGRESSIVE SCAN) jacks
using a Video cable. connection
Connect one end of the component
(Y PB PR) cable to the COMPONENT
VIDEO OUT (PROGRESSIVE SCAN)
jack on the unit and other end to the
COMPONENT INPUT jack on your TV.

AUX IN (L/R) jacks connection

Antenna connection
Connect a VCR or Auxiliary device, etc. to the
Fit the AM loop aerial to its stand INPUT jack of this unit.
Connect the AM loop aerial to the unit.
Press the FUNCTION button on the remote control
Connect the FM aerial until the “AUX” indicator is displayed in the display
The reception will be at its best when the two loose ends of window.
the aerial are in a straight line and horizontal.

MDD64-A0U_BPHLLL ENG 6184.indd 5 2011-04-15 �� 3:24:46

 Main unit
1 Disc tray 12 Z
 OPEN/CLOSE: Open or close your CD
2 1/\ STANDBY/ON door.
13 D
 ISC SKIP
3 D
 isplay window
Choose a desired disc.
4 C
 LOCK 14 E
Q
5 T
 IMER 1 You can choose fixed sound
6 U
 SER EQ impression
7 S 2 12 15 X
 DSS
 elects DVD/CD function.
3 Extreme Dynamic Sound System
Selects TUNER function. 13
4 Reinforce the treble, bass and
Selects TAPE function. 14
5
Selects AUX function. 15 surround effect.
8 SET Confirms the settings. 6 MP3 OPT
16 Optimizes compressible MP3 files so
(TIMER/ CLOCK)
7 that it improves the bass sound.
CD II Pauses
PRESET(-) 17 16 REC/PAUSE(USB/TAPE)
.m TUNING(-) 8 18 17 L
 G EQ
USB Selects USB function. 9 19 You can choose fixed sound
DEMO In power off state to impression
10
demonstrate the function on display 20 18 C
 D SYNC. CD to Tape Synchronized.
window. To cancel it, press 1/\ or
DUBB. Recording from tape to tape.
this button again. 21
B PRESET (+)
9 H eadphone jack M> TUNING(+)
10 USB connector x STOP
11 Cassette Door 1, 2 19 M
 IC VOL. U/u
Adjust microphone volume.
11
20 MIC 1, 2
21 Volume control

Power Save Mode

You can set up the unit into an economic power save mode.
In power-on status, press and hold 1/\ button for about 3 seconds.
- Nothing is displayed in the display window when the unit is turned off.
To cancel, press 1/\.

MDD64-A0U_BPHLLL ENG 6184.indd 6 2011-04-15 �� 3:24:46

 Remote control
1 3
1 POWER: Switches the unit ON or OFF. D.SKIP: Choose a desired disc.
FUNCTION: Changes the function. MUTE: To mute the sound.
SLEEP: Sets the System to turn off automatically at a VOL (Volume) +/-: Adjusts speaker volume.
specified time. (Dimmer : Dims the LED (Light-emitting EQ/ LG EQ (EQUALIZER Effect): You can choose sound
diode) of front panel by half in power-on status.) impressions.
a Z OPEN/CLOSE: Open or close your CD door. 0-9 numerical buttons: Selects numbered options in a menu.
TITLE: If the current DVD title has a menu, the title menu REPEAT/RANDOM : To select a play mode. (Random,
appears on the screen. Otherwise, the disc menu may repeat)
appear.
SUBTITLE: During playback, you can select a desired
DISPLAY: Accesses On-Screen Display. subtitle language.
MENU: Accesses the menu on a DVD disc.
SETUP: Accesses or removes setup menu.
4
I i U u (left/right/up/down): Used to navigate TV Control buttons : Controls the TV. (LG TV only)
on-screen displays.
ENTER: Acknowledges menu selection. Controlling the TV
b PRESET (U u): Selects programme of Radio. You can control the sound level, input source, and
TUN. +/- (I i): Tunes in the desired radio station. power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
2 RETURN (O): Moving back wards in the menu. turns on or off.
REC (z): Recording to USB/ TAPE.
PROG./MEMO.: Accesses or removes Program menu.
STOP (x): Stops playback or recording.
MIC VOL.(+/ - ): Adjusts microphone volume.
PLAY (B): Starts playback.
ECHO VOL.(+/ - ): Adjusts echo volume.
c MO./ST.: MONO/STEREO FM mode state, selects MONO
VOCAL FADER: You can enjoy the function as karaoke, by
or STEREO by pressing this button.
reducing singer vocal of music in the various source.
PAUSE/STEP(X): Pausing playback.
SCAN(bb/BB): Search backward or forward. CLEAR: Removes a track number on the Program List.
SKIP(./>): Go to next or previous chapter/track/Title.

Remote control Operation

Point the Remote Control at the display window and press
d the buttons.
Remote control Battery Installation
1 Detach the battery cover on the rear of the remote control.
2 Insert the R03 (size AAA) battery with 3 and # aligned
correctly.

MDD64-A0U_BPHLLL ENG 6184.indd 7 2011-04-15 �� 3:24:46

 OSD Initial language setting - Optional Adjust the general settings
During the first use of this unit, the initial language setup menu
ON REMOTE
appears on your TV screen. You must complete initial language selec-
tion before using the unit. English will be selected as the initial lan- 1 Display setup menu SETUP
guage. 2 Select a desired option on the first level Uu
ON REMOTE 3 Move to second level i
1 Turn the power on 4 Select a desired option on the second level Uu
The language list appears POWER 5 Move to third level i
2 Select the language UuIi 6 Change the setting U u and
3 Press ENTER ENTER
4 To confirm press I i and ENTER
Adjust the general settings - More you can do
Initial Setting the Area Code Adjust the language settings
OSD – Selects a language for the Setup menu and on-screen display.
When you use this unit for the first time, you have to set the Area
Code as shown below. Disc Audio/ Disc Subtitle/ Disc Menu – S
 elects a language for the Audio/ Menu/
Subtitle.
ON REMOTE [Original]: Refers to the original language in which the disc was recorded.
1 Display setup menu SETUP [Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
2 Select LOCK menu on the first level Uu
code list in the reference chapter.
3 Move to second level Refer to the language code on Page 19.
The activated Area Code appears on the [Off] (for Disc Subtitle): Turn off Subtitle.
second level. i
4 Move to the third level i
5 Enter a new password numerical buttons
(0-9) and ENTER
6 Recheck the entered new password numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be U u I i and
activated. (page 19) ENTER
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password ENTER
8

MDD64-A0U_BPHLLL ENG 6184.indd 8 2011-04-15 �� 3:24:46

 Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV 2.1 Speaker Setup (MDT354)
screen.
ON REMOTE
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected. 1 Open the settings menu SETUP
Display Mode – If you selected 4:3, you’ll need to define how you would like 2 Select the audio icon Uu
widescreen programs and films to be displayed on your TV 3 Select right to enter the audio menu, then
screen. select 2.1 Speaker Setup i ENTER
[Letterbox]: This displays a widescreen picture with black bands at the top 4 Select the speaker you want to adjust Ii
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary

Progressive Scan
Progressive Scan Video provides the high quality pictures with less flickering. If
you are using the Component Video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set [Progressive Scan] to [On].
Press ENTER to confirm your selection
- If you not press ENTER within 10 seconds it will be [Off].

Adjust the audio settings

5 Select an option and change the settings UuIi
DRC (Dynamic Range Control) – M
 ake the sound accurate when the volume
is turned down (Dolby Digital only). Set to 6 Set the output level (volume) of a speaker
[On] for this effect. from -5dB to +5dB. Ii
Vocal – S
 elect [On] to mix karaoke channels into normal stereo. This function is 7 Test the signals of each speaker
effective for multi-channel karaoke DVDs only. Adjust the volume to your taste
according to these signals. Ii
8 Save your settings and exit the Setup
menu O RETURN

MDD64-A0U_BPHLLL ENG 6184.indd 9 2011-04-15 �� 3:24:46

 Adjust the lock settings Setting the sound mode
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password. USER EQ
Enter it again to verify. If you make a mistake while entering number, press 1 ress USER EQ.
P
CLEAR to delete numbers then correct it. 2"USER EQ" is displayed.
If you forget your password you can reset it. Press SETUP and Input ‘210499’ 3P ress SET.
and press ENTER. The password has now been cleared. 4S elect the sound effect you want among BASS(100HZ), MIDDLE(1kHz),
TREBLE(10kHz) by pressing PRESET(-)/PRESET(+).
Rating – S
 elect a rating level. The lower the level, the stricter the rating. Select
5A djust sound level by pressing .m/M>.
[Unlock] to deactivate the rating.
6T o finish the setting, press SET.
Password – Sets or changes the password for lock settings.
[New]: E
 nter a new 4-digits password using the numerical buttons then press VOCAL FADER
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password. You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source. (MP3/ WMA/ CD/ etc.) Press the VOCAL FADER, and
Area code – S
 elect a code for a geographic area as the playback rating level. “FADE ON” will appear in display window.
This determ­ines which area’s standards are used to rate DVDs con- To cancel it, press VOCAL FADER again.
trolled by the parental lock. See the Area Codes on Page 19. - This function is available to use only when a microphone is connected.
- The quality of the VOCAL FADER may be different depending on the
Adjust the others settings recording conditions of music files.
DivX (R) Registration - We provide you with the DivXR VOD (Video on - It is not available on the MONO mode.
demand) registration code that allows you to rent and purchase videos using the
DivXR VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registration
code of the unit.
Semi Karaoke (optional) - W
 hen a chapter/ title/ track is fully finished, this
function shows the score in the screen with a fanfare
sound.

10

MDD64-A0U_BPHLLL ENG 6184.indd 10 2011-04-15 �� 3:24:47

 Enjoying a pre-programmed sound field Setting the clock
The system has a number of pre-set surround sound fields. You can select a ON UNIT
desired sound mode by using EQ/ LG EQ. 1 T urn the power on 1/ |
The displayed items for the Equalizer may be different depending on sound 2 Press for at least 2 seconds CLOCK
sources and effects.
3 Choose from either .m/M>
ON DISPLAY Description AM 12:00 (for an AM and PM display) or 0:00 (for
a 24 hour display)
NATURAL You can enjoy comfortable and natural sound.
Local Regionally optimized sound effect.(DANGDUT/ ARABIC/ 4 Confirm your selection SET
Specialization PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SAMBA/ 5 Select the hours .m/M>
equalizer SALSA) 6 Press SET
AUTO EQ Realizes the sound equalizer that is the most similar to the 7 Select the minutes .m/M>
genre of which is included in the MP3 ID3 tag of song files.
8 Press SET
POP This program lends an enthusiastic atmosphere to the
CLASSIC sound, giving you the feeling you are at an actual rock Using your player as an alarm clock
JAZZ , pop, jazz or classic concert.
ROCK 1P  ress and hold TIMER. Each functions flashes(Ex. TUNER, USB, ...)
MP3 OPT This function is optimized for compressible MP3/WMA file. 2 Press SET when the function you want to be woken by is showing.
It improves the bass sound. If you choose TUNER, “PLAY” and “REC” flashes in the display window
XDSS ON Reinforce the treble, bass and surround sound effect.
alternately.
3 Choose one of them by pressing the SET.
VIRTUAL You can enjoy more virtual surround sound.
4 “ON TIME” will be displayed. This is where you set the time you want the
NORMAL(OFF) You can enjoy the sound without equalizer effect.
alarm to start. Use .m/M> to change the hours and minutes
and SET to save.
5 The “OFF TIME” will be displayed. This is where you set the time you
want the function to stop.
6 Use .m/M> to change the hours and minutes and press SET
to save.
7 You will be shown the volume (VOL) you want to be woken by. Use
.m/M> to change the volume and SET to save. Switch the
system off. The clock icon “ ” shows that the alarm is set.
8 When the system is turned off you can check the time the alarm and turn
the alarm on and off by pressing TIMER.
Fall asleep while listening to your player
 ress SLEEP one or more times to select delay time between 10 and 180 minutes,
P
after the player will turn off. To check the remaining time, press SLEEP.
(DIMMER ON) -> SLEEP 180 -> ... -> SLEEP 10 -> (DIMMEER OFF)
*DIMMER: The LED (Light-emitting diode) of front panel is turned off and the dis-
play window will be darken by half.
11

MDD64-A0U_BPHLLL ENG 6184.indd 11 2011-04-15 �� 3:24:47

 Displaying Disc Information Playing a Disc
ON REMOTE ON UNIT ON REMOTE
1 Press DISPLAY 1 Open the disc tray Z OPEN/CLOSE Z OPEN/CLOSE
2 Select an item Uu 2 Insert a disc
3 Adjust the Display menu settings Ii 3 Close the disc tray Z OPEN/CLOSE Z OPEN/CLOSE
4 To return the exit DISPLAY 4 To Start playback B B
5 To stop playback STOP x
Displaying Disc Information - More you can do
You can select an item by pressing U u and change or select the setting by Playing a Disc - More you can do
pressing I i. Playing a DVD that has a menu DVD

Current title (or track/ file) Most DVDs now have menus which load first before the film begins to play. You
number/total number of titles (or tracks/ files) can navigate these menus using I i U u to highlight an option. Press PLAY
Current chapter number/total number of chapters to select.

Elapsed playing time Skipping to the next/previous chapter/ track/ file ALL

Selected audio language or channel Press > to move to the next chapter/ track/ file.
Press . to return to the beginning of the current chapter/ track/ file.
Press . twice briefly to step back to the previous chapter/ track/ file.
Selected subtitle
Pausing a playback ALL
Selected angle/total number of angles
Press PAUSE/STEP (X) on the remote control to pause playback. Press B to
Selected Sound/EQ mode
continue playback.
Frame-by-Frame playback DVD DivX

Press PAUSE/STEP (X) on the remote control repeatedly to play Frame-by-

Frame playback.
Symbol Used in this Manual Playing repeatedly or randomly ALL

All discs and file listed below ALL MP3 files MP3 1P  ress REPEAT/RANDOM repeatedly. The current track/ file will be played
DVD and finalized DVD±R/RW DVD WMA files WMA back repeatedly or randomly.
DivX files DivX Audio CDs ACD 2 To return to normal playback, press REPEAT/RANDOM repeatedly to select
[Off].
- Random play mode : only music files.
Selecting a subtitle language DVD DivX

During playback, press SUBTITLE on the remote control repeatedly.

Fast forward or fast reverse ALL

1 Press m or M on remote control during playback.

2Y ou can change the various playback speed by pressing m or M repeatedly.
12 3 Press B to continue play at normal speed.

MDD64-A0U_BPHLLL ENG 6184.indd 12 2011-04-15 �� 3:24:47

 1.5 times faster playback DVD Changing the character set to display DivX® subtitle correctly
1 Press B when a disc is already playing to watch and listen. - Optional DivX
2 B x1.5 will appear on the screen. 1 If the subtitle does not display properly, press and hold SUBTITLE about 3
3 Press B again to return to normal playback speed. seconds to display the language code menu.
2 Press SUBTITLE repeatedly to change the language code until the subtitle is
Slow down the playing speed DVD
displayed properly.
1 While playback is paused, press m/M.
DivX disc compatibility with this player is limited as follows DivX
2 You can change the various playback speed by pressing m/M repeatedly.
3 Press B to continue play at normal speed. • Available resolution: within 800x600 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
Starting play from selected time DVD DivX • If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
Searches for the starting point of entered time code.
• If the video and audio structure of recorded files is not interleaved,
1 Press DISPLAY then select clock icon. and then press ENTER.
either video or audio is outputted.
2 Enter a time then press ENTER.
• Playable DivX file : ".avi", ".mpg", ".mpeg", ".divx"
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation
“11020” by using numerical buttons and press ENTER. If you enter the wrong
Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt).
number, press CLEAR to enter again.
• Playable Codec format : "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP4V3",
Last Scene Memory DVD "3IVX".
• Playable Audio format : "AC3", "PCM", "MP3", "WMA".
This unit memorizes last scene from the last disc that is viewed. The last scene • For Discs formatted in Live file system, you can not it on this player.
remains in memory even if you remove the disc from the player or switch off • If the name of movie file is different from that of the subtitle file, during
the unit. If you load a disc that has the scene memorized, the scene is auto- playback of a DivX file, subtitle may not be display.
matically recalled. • If you play a DivX file differ from DivXspec, it may not operate normally.
Screen Saver
The screen saver appears when you leave the unit in stop mode for about five
minutes.

System Select - Optional

You must select the appropriate system mode for your TV system. In DVD/CD
fanction, remove any disc that might be in the unit, press and hold
PAUSE/STEP (X) for more than five seconds to be able to select a system
(PAL, NTSC, AUTO).

Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG

When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and
JPEG files together, you can select file type with MENU button on the remote
control.

13

MDD64-A0U_BPHLLL ENG 6184.indd 13 2011-04-15 �� 3:24:48

 Creating your own program WMA MP3 ACD
Viewing photo files
You can play the contents of a disc in the order you want by arranging the order
of the songs on the disc. The program is cleared when the disc is removed. ON UNIT ON REMOTE
1 Select a desired music then press PROG./MEMO. or select “ ” and then
1 Open the disc tray Z OPEN/CLOSE Z OPEN/CLOSE
press ENTER to add the music to the program list.
2 To add all music in the disc, select “ ” and then press ENTER. 2 Insert a Disc -
3 Select a music from the program list then press ENTER to start programmed 3 Close the disc tray Z OPEN/CLOSE
Z OPEN/CLOSE
playback.
4 To clear a music from the program list, select the music you want to clear 4S
 elect a photo file on - Uu
the menu
then press CLEAR or select “ ” icon and then press ENTER.
To clear all music from the program list, select “ ” then press ENTER. 5D
 isplay the selected B ENTER
file in full screen
Displaying file information (ID3 TAG ) MP3
6 To stop playblack STOP x
While playing a MP3 file containing file information, you can display the
information or time by pressing DISPLAY repeatedly.
Viewing photo files - More you can do
MP3 / WMA disc compatibility with this player is limited as follows
WMA MP3 Viewing photo files as a slide show
• Sampling frequency : within 32 to 48 kHz (MP3/ WMA) 1 Use I i U u to highlight icon then press ENTER to start slide show.
• Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) 2 You can change slide show speed using I i when icon is highlighted.
• File extensions : “.mp3”/ “.wma”/ JOLIET
• CD-ROM file format : ISO9660 Skipping to the next/previous photo
• We recommend that you use Easy-CD Creator, which creates an ISO 9660 Press . or > to view the previous/next photo.
file system.
• They should not contain special letters such as / ? * : “ < > l etc. Rotating a photo
• The total number of files on the disc should be less than 999. Use U u to rotate the photo in full screen.
This unit requires discs and recordings to meet certain technical standards in
order to achieve optimal playback quality. Pre-recorded DVDs are automati- Pausing a slide show
cally set to these standards. There are many different types of recordable disc 1 Press PAUSE/STEP (X).
formats (including CD-R containing MP3 or WMA files) and these require cer- 2 Press B or X to continue the slide show.
tain pre-existing conditions (see above) to ensure compatible playback. JPEG disc compatibility with this player is limited as follows
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right JPEG disc compatibility with this player is limited as follows :
to grant such permission. Permission should always be sought from the • Max pixel in width : 5 120 x 3 840, Progressive jpeg: 2 043 x 1 536
copyright owner. • Recording condition: ISO 9660 LEVEL 1/ JOLIET
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”

14

MDD64-A0U_BPHLLL ENG 6184.indd 14 2011-04-15 �� 3:24:48

 Listening to the radio Listening to the cassette tapes
ON UNIT ON REMOTE ON UNIT ON REMOTE
1 Select FM/ AM TUNER FUNCTION 1 Open the tape door Z PUSH EJECT
2 Select the radio station TUNING(-/+) TUN. +/- 2 Insert the tape
3 T
 o ‘save’ a radio station PROG./MEMO. 3 Close the tape door Z PUSH EJECT
A preset number will show in 4 Select the TAPE function TAPE FUNCTION
the display. 5 Start the tape playing B B
4 Select the preset number PRESET(-/+) PRESET U u 6 To stop a tape playing STOP x
5 T
 o confirm press PROG./MEMO.
Up to 50 radio stations can
be saved
Listen to the cassette tapes - More you can do
6 T
 o select a ‘saved’ station PRESET(-/+) PRESET U u Playing Fast backward or Forward
press After pressing .m/M> (bb/BB on the remote control) during
playback, press B at a point you want.
Listening to the radio - More you can do Dubbing
This function allows you to record from tape to tape.
Looking for radio stations automatically 1 Press TAPE to select “TAPE-1”.
Press TUNING(-/+) on the front panel (TUN.- /TUN.+ on the remote con- 2 Insert the tape as follows.
trol) for more than 0.5 second. The tuner will scan automatically and stop TAPE1 - Insert a playback tape to dub.
when it finds a radio station. TAPE2 - Insert a blank tape.
Deleting all the saved stations 3 Press DUBB. “DUBBING” shows. Dubbing starts.
4 To stop dubbing, press x.
1P ress and hold PROG./MEMO. on the remote control. “ERASE ALL”
shows. NOTE: In case you use the tape for the first time push the Z PUSH EJECT to
2 Press PROG./MEMO. to erase all the saved stations. open the tape door and then remove the cushion in it.
Improving poor FM reception
Press PLAY (B) (MO./ST.) on the remote control.

15

MDD64-A0U_BPHLLL ENG 6184.indd 15 2011-04-15 �� 3:24:48

 Listening to music from your Using an USB device
external device You can enjoy media files saved on an USB device by connecting the
The unit can be used to play the music from many types of external device. USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
ON UNIT ON REMOTE
ON UNIT ON REMOTE
1 C
 onnect the external device to the AUX
connector of the unit. 1 C
 onnect the USB device to the USB
> If your TV has only one output for port of the unit.
audio(MONO), connect it to the 2 Select the USB function. USB FUNCTION
left(white) audio jack on the unit. 3 Select a file you want to play. Uu
VCR, TV, ...
Your unit 4 Start your media playing. B B / ENTER
5 To stop, press STOP x
6 B
 efore disconnecting the portable TUNER/TAPE/... FUNCTION
USB device, change to any other
function.

2 T urn the power on. 1/ | POWER Compatible USB Devices

3 Select the AUX function. AUX FUNCTION • MP3 Player : Flash type MP3 player.
4 Turn on the external device and start it • USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
playing. • This USB Function may not be available depending on devices.
USB device requirement
 evices which require additional program installation when you have connected
D
it to a computer, are not supported.
Look out for the follows
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1 000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• The unit can not be used as a storage device.
• USB port of the unit can not be connected to PC.

16

MDD64-A0U_BPHLLL ENG 6184.indd 16 2011-04-15 �� 3:24:48

 When you are recording, look out for the following
Recording to USB
• You can check the recording percentage rate for the USB record on the
You can record a various sound source to USB. screen during the recording. (AUDIO, MP3/ WMA CD only)
ON PLAYER ON REMOTE • During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at
1 Connect the USB device to the unit. that time will be stored. (AUDIO CD Only)
2 S  elect a mode in which you want to TUNER/TAPE/... FUNCTION • Do not remove the USB device during USB recording. If not, an incomplete
record. (TUNER/ CD/ ....) file may be made and not deleted on PC.
Play back a sound source first. • If USB recording does not work, the message like “NO USB”, “ERROR”,
3 Start the recording. REC/PAUSE z REC “USB FULL” or “NO REC” is displayed on the display window.
> If you press the button on the remote (USB) • Multi card reader device or External HDD can not be used for USB
control, the display changed in the recording.
following order, • A file is recoreded by 128 Mbyte when you record for a long term.
“USB REC” <-> “TAPE REC”. Then press • When you stop recording during playback, the file will not be stored.
the button on “USB REC” once more. • In the state CD-G disc, USB record is not operated.
• You may not record more than 999 files.
4 To stop recording, press STOP x
• The file number is saved automatically.
• It’ll be stored as follows.
Recording to USB - More you can do
Recording Music file in disc source to USB
AUDIO CD MP3/ WMA the other sources
One track recording
If the USB recording is played during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
Program list recording
USB records after creating your own program if you want to record the track you The making of unauthorized copies of copy-protected material, including
want (Audio CD only). computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offence.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights

17

MDD64-A0U_BPHLLL ENG 6184.indd 17 2011-04-15 �� 3:24:48

 Recording to TAPE Synchronized Recording from
You can record a various sound source to TAPE. CD to Tape
ON UNIT ON REMOTE
ON UNIT ON REMOTE
1 Open the tape deck. PUSH EJECT
1 O  pen the tape deck and then insert PUSH EJECT
> There are 2 tape decks on the unit, open
a blank tape.
the second one.
> There are 2 tape decks on the unit,
2 Insert a blank tape and close the door.
open the second one.
3 Select a mode in which you want to TUNER/USB/... FUNCTION
record.
2 Close the door and insert a CD. Z OPEN/CLOSE Z OPEN/CLOSE
> Audio CD only
4 Play back a sound source first. B B
3 To select CD function, press DVD/CD FUNCTION
5 Press REC/PAUSE z REC
4 Press the button on a stop status to CD SYNC.
>T  he display changed in the following move to CD synchronizing mode.
order, “USB REC” <-> “TAPE REC” >R  ecording automatically starts
6 Press the button once more when REC/PAUSE z REC 7 seconds later after “CD SYNC” blinks.
“TAPE REC” is displayed. 5 To stop, press STOP x
> Recording starts.
7 To stop recording, press STOP x

18

MDD64-A0U_BPHLLL ENG 6184.indd 18 2011-04-15 �� 3:24:48

 Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Code Language Code Language Code Language Code Language Code Language Code
Afar 6565 Croatian 7282 Hausa 7265 Lingala 7678 Quechua 8185 Tajik 8471
Afrikaans 6570 Czech 6783 Hebrew 7387 Lithuanian 7684 Rhaeto-Romance 8277 Tamil 8465
Albanian 8381 Danish 6865 Hindi 7273 Macedonian 7775 Rumanian 8279 Telugu 8469
Ameharic 6577 Dutch 7876 Hungarian 7285 Malagasy 7771 Russian 8285 Thai 8472
Arabic 6582 English 6978 Icelandic 7383 Malay 7783 Samoan 8377 Tonga 8479
Armenian 7289 Esperanto 6979 Indonesian 7378 Malayalam 7776 Sanskrit 8365 Turkish 8482
Assamese 6583 Estonian 6984 Interlingua 7365 Maori 7773 Scots Gaelic 7168 Turkmen 8475
Aymara 6588 Faroese 7079 Irish 7165 Marathi 7782 Serbian 8382 Twi 8487
Azerbaijani 6590 Fiji 7074 Italian 7384 Moldavian 7779 Serbo-Croatian 8372 Ukrainian 8575
Bashkir 6665 Finnish 7073 Javanese 7487 Mongolian 7778 Shona 8378 Urdu 8582
Basque 6985 French 7082 Kannada 7578 Nauru 7865 Sindhi 8368 Uzbek 8590
Bengali, Bangla 6678 Frisian 7089 Kashmiri 7583 Nepali 7869 Singhalese 8373 Vietnamese 8673
Bhutani 6890 Galician 7176 Kazakh 7575 Norwegian 7879 Slovak 8375 Volapük 8679
Bihari 6672 Georgian 7565 Kirghiz 7589 Oriya 7982 Slovenian 8376 Welsh 6789
Breton 6682 German 6869 Korean 7579 Panjabi 8065 Spanish 6983 Wolof 8779
Bulgarian 6671 Greek 6976 Kurdish 7585 Pashto, Pushto 8083 Sudanese 8385 Xhosa 8872
Burmese 7789 Greenlandic 7576 Laothian 7679 Persian 7065 Swahili 8387 Yiddish 7473
Byelorussian 6669 Guarani 7178 Latin 7665 Polish 8076 Swedish 8386 Yoruba 8979
Chinese 9072 Gujarati 7185 Latvian, Lettish 7686 Portuguese 8084 Tagalog 8476 Zulu 9085

Area Codes
Choose a area code from this list.
Area Code Area Code Area Code Area Code Area Code Area Code
Afghanistan AF Costa Rica CR Greenland GL Maldives MV Paraguay PY Sri Lanka LK
Argentina AR Croatia HR Hong Kong HK Mexico MX Philippines PH Sweden SE
Australia AU Czech Republic CZ Hungary HU Monaco MC Poland PL Switzerland CH
Austria AT Denmark DK India IN Mongolia MN Portugal PT Taiwan TW
Belgium BE Ecuador EC Indonesia ID Morocco MA Romania RO Thailand TH
Bhutan BT Egypt EG Israel IL Nepal NP Russian Federation RU Turkey TR
Bolivia BO El Salvador SV Italy IT Netherlands NL Saudi Arabia SA Uganda UG
Brazil BR Ethiopia ET Jamaica JM Netherlands Antilles AN Senegal SN Ukraine UA
Cambodia KH Fiji FJ Japan JP New Zealand NZ Singapore SG United States US
Canada CA Finland FI Kenya KE Nigeria NG Slovak Republic SK Uruguay UY
Chile CL France FR Kuwait KW Norway NO Slovenia SIB Uzbekistan UZ
China CN Germany DE Libya LY Oman OM South Africa ZA Vietnam VN
Colombia CO Great Britain GB Luxembourg LU Pakistan PK South Korea KR Zimbabwe ZW
Congo CG Greece GR Malaysia MY Panama PA Spain ES

19

MDD64-A0U_BPHLLL ENG 6184.indd 19 2011-04-15 �� 3:24:48

 Troubleshooting
Symptom Cause Correction
POWER
No power The power cord is not plugged in. Plug in the power cord.

RADIO
No sound The function switch is not set to the Radio mode. Set the switch to the Radio mode.
There are electronic devices near the unit. Set the unit far from the devices.
Some noise occurs. The antenna is positioned or connected poorly Check the antenna connection and adjust its position

DVD/CD

The unit does not start  n unplayable disc is inserted.

A Insert a playable disc.
playback The disc is placed upside down. Place the disc with the playback side down.
No picture The disc is not placed within the guide. Place the disc on the disc tray correctly inside the guide.
Clean the disc.
The TV is not set to receive the video signal Select the appropriate video input model on the TV so the
picture from the unit appears on the TV

REMOTE CONTROL

The remote control does The remote control is not pointed at the remote sensor of Point the remote control to remote sensor directly of the
not work properly. the unit directly. unit.

The battery in the remote control is exhausted. Replace the battery with new ones.

TAPE
Unable to record Record protect tabs are removed. Cover holes on back edge of tape with tap.

20

MDD64-A0U_BPHLLL ENG 6184.indd 20 2011-04-15 �� 3:24:49

 About the x Symbol Display
Types of Playable Discs “ x ” may appear on your TV display during operation and indicates that the
Type Logo function explained in this owner’s manual is not available on that specific DVD
video disc.
DVD-VIDEO: Discs such as movies that can
be purchased or rented. Regional code
DVD-R: Video mode and finalized only This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
DVD-RW: Video mode and finalized only •M
 ost DVD discs have a globe with one or more numbers in it clearly visible
DVD VR format that have been finalized can not be on the cover. This number must match your unit’s regional code or the disc
played in this unit. cannot play.
DVD+R: Video mode only • If you try to play a DVD with a different regional code from your player, the
Supports the double layer disc also. message “Check Regional Code” appears on the TV screen.

DVD+RW: Video mode only Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
Audio CD: Music CDs or CD-R/ CD-RW in music CD public, or rent copyrighted material without permission. This product features
format that can be purchased. the copy protection function developed by Macrovision. Copy protection
signals are recorded on some discs. When recording and playing the pictures
In addition, this unit can play a DVD±R/RW and CD-R or CD-RW that of these discs picture noise will appear. This product incorporates copyright
contains audio titles, MP3, WMA, JPEG files. protection technology that is protected by U.S. patents and other intellectual
Depending on the conditions of the recording equipment or the CD-R/ property rights. Use of this copyright protection technology must be authorized
RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs by Macrovision, and is intended for home and other limited viewing uses
may not be played on the unit due to the recording quality or physical only unless otherwise authorized by Macrovision. Reverse engineering or
condition of the disc, or the characteristics of the recording device and disassembly is prohibited.
authoring software. The disc will not play if it has not been correctly CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
finalized. Player does not support these kinds of discs. TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
Laboratories. THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
Manufactured under license from Dolby Laboratories. REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

21

MDD64-A0U_BPHLLL ENG 6184.indd 21 2011-04-15 �� 3:24:49

 Specifications
General
Power supply Refer to main label.
Power consumption Refer to main label.
Net Weight MDD64: 5.4 kg MDD104: 5.5 kg MDT354: 5.8 kg RDD264: 5.7 kg
External dimensions (W x H x D) 274 x 334 x 344 mm
Operating conditions Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating humidity 5 % to 85 %
Bus Power Suply (USB) DC 5 V 500 mA
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Intermediate Frequency 128 KHz
AM Tuning Range 522 to 1,620 KHz or 522 to 1,710 KHz or 520 to 1,710 KHz
Intermediate Frequency 45 KHz
Amplifier
OUTPUT POWER  DD64: 30 W x 2 (4 Ω)
M
MDD104: 50 W x 2 (4 Ω)
RDD264: 130 W x 2 (4 Ω)
MDT354: Front: 100 W x 2 (4 Ω)
Subwoofer: 150 W (3 Ω)
DVD/CD player Cassette tape player
Frequency response (audio) 40 - 20 000 Hz F.F/REW Time 120 sec (C-60)
Signal-to-noise ratio (audio) More than 75 dB (1 kHz) Frequency Response 250 - 8 000 Hz
Signal-to-noise ratio (video) More than 55 dB (1 kHz) Signal to Noise Ratio 43 dB
Channel Separation 50 dB (P/B)/45 dB (R/P)
Dynamic range (audio) More than 80 dB
Erase Ratio 55 dB (MTT-5511)
Video output 1.0 V (p-p), 75 Ω
Component Video output (Y) 1.0 V (p-p), 75 Ω
(Pb)/(Pr) 0.7 V (p-p), 75 Ω

Speakers
MDS64V MDS104V MDS354V MDS354W RDS264V
Front Speaker Front Speaker Front Speaker Subwoofer Front Speaker
Type 2 way 2 speaker 2 Way 2 Speaker 2 way 2 speaker 1 Way 1 Speaker 2 way 2 speaker
Impedance 4Ω 4 Ω 4 Ω 3 Ω 4Ω
Rated Input Power 30 W 50 W 100 W 150 W 130 W
Max. Input Power 60 W 100 W 200 W 300 W 260 W
Net Dimensions (W x H x D) 219 x 331 x 330 mm 219 x 331 x 330 mm 220 x 333 x 283 mm 274 x 333 x 342 mm 214 x 382 x 301 mm
Net Weight (1 EA) 3.6 kg 3.6 kg 3.7 kg 5.9 kg 4.1 kg

Designs and specifications are subject to change without prior notice.

22

MDD64-A0U_BPHLLL ENG 6184.indd 22 2011-04-15 �� 3:24:49

MDD64-A0U_BPHLLL ENG 6184.indd 23 2011-04-15 �� 3:24:49
MDD64-A0U_BPHLLL ENG 6184.indd 24 2011-04-15 �� 3:24:49