1FS - Basic Warehouse Inbound Processing From Supplier

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC
Purpose © 2018 SAP SE or an SAP affiliate company. All rights reserved. 1

Test Script PUBLIC
SAP S/4HANA - 28-08-18
Basic Warehouse Inbound Processing from Supplier

(1FS_US)
Table of Contents
1 Purpose 3
2 Prerequisites 4
2.1 System Access 4
2.2 Roles 4
2.3 Master Data, Organizational Data, and Other Data 4
2.4 Business Conditions 7
2.5 Preliminary Steps 7
2.5.1 Create User Settings for Fiori App: Create Inbound Deliveries - Deliveries 7
2.5.2 Create User Settings for Fiori Tile: Create Warehouse Tasks Handling Units 8
2.5.3 Maintain User (for RFUI Processing) 9
2.5.4 Data Sheet for IDs 10
3 Overview Table 13
4 Test Procedures 17
4.1 Create Purchase Order 17
4.2 Create EWM Inbound Delivery 19
4.3 Putaway to the Mezzanine 20
4.3.1 Process Goods Receipt 21
4.3.2 Check Warehouse Orders (Optional) 24
Sensitivity: Internal & Restricted

4.3.3 Putaway of Products 24
4.4 Putaway to the High Rack Narrow Aisle 26
4.4.3 Move Pallets from Staging Area to Handover Point 31
4.4.4 Putaway of Products from the Handover Point to the High Rack Pallet Buffer 33
4.5 Putaway to the Bulk Storage 36
4.5.1 Process the Goods Receipt 36
4.5.3 Putaway of Products to Bulk Storage 42
4.6 Putaway from Clarification Zone 45
4.6.2 Move Products to Clarification Zone 47
4.6.3 Repack at the Clarification Zone 49
4.6.4 Create Warehouse Tasks to Move Handling Units from the Clarification Zone 51
4.6.5 Move Products from Clarification Zone to Mezzanine 52
4.7 Check Inbound Delivery (Optional) 54
4.8 Appendix 56
4.8.1 Warehouse Management Monitor Handling 56
4.8.2 Succeeding Processes 57

1 Purpose
In this process, differently packed goods received from suppliers are put away to final storage bins in the warehouse. For example, full pallets go to the high rack narrow aisle while cartons or
pieces of the product would go to the mezzanine. Large parts are routed to the Bulk Storage. During putaway, you might use a handover point due to the physical constraints of the high rack
narrow aisle, where only a specialized high-level truck can reach all levels. The destination storage type for putaway is partially determined by the product's Putaway Control Indicator (PACI). If a
product is missing the PACI or there is insufficient space in the storage type, it is moved to a clarification zone. You get full RF/mobile device support throughout the process.
This document provides a detailed procedure for testing this scope item after solution activation, reflecting the predefined scope of the solution. Each process step, report, or item is covered in
its own section, providing the system interactions (test steps) in a table view. Steps that are not in scope of the process but are needed for testing are marked accordingly. Project-specific steps
must be added.

2 Prerequisites
This section summarizes all the prerequisites for conducting the test in terms of systems, users, master data, organizational data, other test data and business conditions.
2.1 System Access
System Details
System Accessible via SAP Fiori launchpad. Your system administrator provides you with the URL to access the various apps assigned to your role.
2.2 Roles
Use the following standard test users or assign roles to testers, respectively:
Business Role Business Role ID as supplied by SAP Log On

Warehouse Clerk (EWM) SAP_BR_WAREHOUSE_CLERK_EWM
Warehouse Operative (EWM) SAP_BR_WAREHOUSE_OPERATIVE_EWM
Purchaser SAP_BR_PURCHASER
Receiving Specialist SAP_BR_RECEIVING_SPECIALIST
2.3 Master Data, Organizational Data, and Other Data

Default Values
The organizational structure and master data of your company was created in an SAP S/4HANA system during implementation. The organizational structure reflects the structure of an example
company. The master data represents materials, customers, and suppliers, depending on the operational focus of the demonstrated processes.
The business process is enabled with this organization-specific master data. Examples are provided in the next section.
Use the following master data in the process steps described in this document:
Prerequisites © 2018 SAP SE or an SAP affiliate company. All rights reserved. 4
Product Master Data:
Value UoM EAN Description

EWMS4-01 1 PAL 9783836214230 (CAR) Small Part, Slow-Moving Item
=6 CAR
=48 PC
EWMS4-02 1 PAL 9783836218122 (CAR) Small Part, Fast-Moving Item

=8 CAR
=192 PC
EWMS4-10 1 PAL 9781592292868 (PC) Large Part, Slow-Moving Item

=4 PC
EWMS4-11 1 PAL 9781592294091 (PC) Large Part, Fast-Moving Item

=6 PC
EWMS4-40 1 PAL=360 PC 9781592294121(CAR) Product for Bulk Storage A, Short Lane
EWMS4-41 1 PAL=480 PC 9781592294497(CAR) Product for Bulk Storage A, Long Lane
EWMS4-42 1 PAL=6 PC 9781592293858(PC) Product for Bulk Storage B
Packaging Material Master Data:
Value UoM EAN Description

EWMS4-PAL00 PC EWM Default Pallet with SSCC generation
EWMS4-PAL01 PC US Pallet with SSCC generation
EWMS4-STOCON00 PC EWM Default Storage Container / Box
EWMS4-WBTRO00 PC EWM Default Wire Basket Trolley
For more information on creating these master data objects, see the following Configuration Guides:
Configuration Guide for Material Master Creation Description
BL5
BL9 Section Material Master
Supplier Master Data:

Supplier Description
EWM Supplier 01
Organizational Master Data in the SAP S/4HANA System:
Org. Master Data Value Master Data Details Comments
Company Code 1710
Purchasing Organization 1710
Purchasing Group 002
Plant 1710
Storage Location 171D Received on Dock
ERP Warehouse Number 171
Receiving Point 1710
Warehouse Specific Organizational Master Data:
Org. Master Data Value Master Data Details Comments
Supply Chain Unit YWAREHOUSE-1710
EWM Warehouse Number 1710
Custodian CZB1710
Entitled to Dispose CZB1710
Goods Receipt Office YWAREHOUSE-1710
Warehouse-Specific Master Data:
Org. Data Value Org. Data Details Comments

Storage Type Y001 Narrow Aisle High Rack Hand-Over Point
Storage Type Y011 Narrow Aisle High Rack Pallet Buffer
Storage Type Y021 Mezzanine
Storage Type Y041 Bulk Storage A (Partial Pallets Allowed)
Storage Type Y042 Bulk Storage B (No Partial Pallets)

Org. Data Value Org. Data Details Comments
Storage Type Y052 Picking Area for Bulk B (Fixed Bin)
Storage Type Y910 Inbound Staging Area
Storage Type Y930 Doors
Storage Type Y970 Clarification Zone
2.4 Business Conditions

Before this scope item can be tested, the following business conditions must be met.
Scope Item Business Condition

BNZ Create New Open MM Posting Period You have completed the step described in the Create New Open MM Posting Period master data script. Posting Period is up to date.
2.5 Preliminary Steps
2.5.1 Create User Settings for Fiori App: Create Inbound Deliveries - Deliveries
Use
In this step, you set up user settings that are necessary for the Fiori App Create Inbound Deliveries – Deliveries.

Procedure
Test Step Test Step Name Instruction Expected Result Pass / Fail / Com-
# ment
1. Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) role. The Fiori Launch Pad is dis-
played.
2. Access the App Choose Create Inbound Deliveries - Deliveries.
3. Close the message In case, there is an error message Before you start work, please set the de-
Box fault warehouse.
Choose Close.
4. Set Default Parame- In the dialog box Default Parameters, make the following entry :
ters Warehouse Number: 1710
Choose Save.
2.5.2 Create User Settings for Fiori Tile: Create Warehouse Tasks Handling Units
Use
In this step, you set up user settings that are necessary for Fiori Tile: Create Warehouse Tasks Handling Units.
Procedure
# ment
1. Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) role. The Fiori Launch Pad is dis-
played.
2. Log On to the Click Home on top of the screen to open All My Apps list.
App

# ment
In the App list, choose EWM - Work Scheduling and then choose Create Warehouse Tasks - Han-
dling Units.
3. Set Default Val- Choose Default Values.

ues Enter the following data :
Warehouse Number : 1710
Whse Proc. Type : Y123
Choose Continue.
2.5.3 Maintain User (for RFUI Processing)

With this setting, you can assign your logon user to a resource used in the RF (Radio Frequency) processing. By doing this, you do not need to make entries in the input fields in Fiori App Test RF
Environment every time you access the RF processing. You can easily change the resource of the process requires it.
Procedure
Test Test Step Instruction Expected Result Pass / Fail /

Step # Name Comment
1. Logon Open the SAP Fiori launchpad with the EWM Warehouse Worker role. The SAP Fiori
launchpad is dis-
played.
2. Access the Click Home on top of the screen to open All My Apps list.
App In the App list, choose EWM - Settings RF and then choose Maintain User Settings - Radio Frequency.
3. Switch to On the Display View User Settings for Radio Frequency screen, choose Edit (Ctrl + F1) to switch to the edit mode.
Change Mode
4. Create New On the Change View User Settings for Radio Frequency screen, choose New Entries.
Entries On the New Entries: Overview of Added Entries screen, enter the following data:
User: Your logon User

Step # Name Comment
Prsn. Prof. : **
Warehouse Number :1710
Resource: <Y…-#>
Note Choose a resource value, one you often use or the resource that you usually use when starting your pro-cesses. Apart
from the process-step specific resource documented in every process step, all RF-based process steps can operate when
your use the “generic” YALL-1 resource.
5. Save the data Choose Save.

Choose Back.
2.5.4 Data Sheet for IDs
Use
In order to facilitate working through the process steps, you can print the following table and note down all IDs you create:
Procedure
Purchase Order to Supplier
Step Object Value Comment

4.1 1st Purchase Order for putaway to the Mezzanine
2nd Purchase Order for putaway to the High Rack Narrow Aisle
3rd Purchase Order for putaway to the Bulk Storage
4th Purchase Order for Putway from Clarification Zone
4.2 ASN Number / Supplier’s Delivery Note for 1st PO

ASN Number / Supplier’s Delivery Note for 2nd PO
ASN Number / Supplier’s Delivery Note for 3rd PO
ASN Number / Supplier’s Delivery Note for 4th PO
Inbound Delivery ID for 1st PO
Inbound Delivery ID for 2nd PO
Inbound Delivery ID for 3rd PO
Inbound Delivery ID for 4th PO
Handling Units

4.3.1 Handling Unit ID For product EWMS4-01 in cartons (For example, 2 CAR)
SSCC numbering
4.4.1 Handling Unit ID For product EWMS4-10 in a full pallet (For example, 4 PC)
Internal numbering
Handling Unit ID For product EWMS4-10 in a full pallet (For example, 4 PC)
Internal numbering
SSCC numbering
4.5.1 Handling Unit ID For product EWMS4-40 in a full pallet (For example, 36 CAR)
SSCC numbering
Handling Unit ID For product EWMS4-40 in a full pallet (For example, 36 CAR)
SSCC numbering
Handling Unit ID For product EWMS4-41 in a full pallet (For example, 48 CAR)
SSCC numbering

SSCC numbering
SSCC numbering
4.6.1 Handling Unit ID For product EWMS4-02 in cartons (For example, 5 CAR)
Internal numbering
Handling Units after Repacking in the Clarification Zone

4.6.3 Handling Unit ID For product EWMS4-02 with 4 CAR after repacking.
Internal numbering
Handling Unit ID For product EWMS4-02 with 1 CAR after repacking.

Internal numbering
You can also use the Warehouse Management Monitor to find the HU IDs.
For more information, refer to Warehouse Management Monitor Handling in the Appendix.

3 Overview Table
The steps in the system, especially the transaction codes with additional explanations, are listed below:
Putaway of products to the Mezzanine:
Process Step Business Role Transaction /App Expected Results
Create Purchase Order [page ] Purchaser Create Purchase Order Purchase order created and distributed to vendor.
17 Advanced
Create EWM Inbound Delivery Warehouse Clerk Create Inbound Deliver- The inbound delivery is created with reference to the PO created in SAP S/4HANA system.
[page ] 19 (EWM) ies- Deliveries
Process Goods Receipt [page ] Warehouse Opera- Test RF Environment The goods receipt is posted by function “Receiving of Handling Units by ASN”.
21 tive (EWM) HUs are created for various products. Therefore, the user enters an HU ID (preprinted) and the pack-
aging material. The quantity is entered during goods receipt.
Goods receipt is then booked and distributed to SAP S/4HANA.
Check Warehouse Orders (Op- Warehouse Clerk Warehouse Monitor Check the WO assignment to Inbound RF queues.
tional) [page ] 24 (EWM)
Putaway of Products [page ] Warehouse Opera- Test RF Environment Putaway WTs are confirmed in RF and System Guidance by Queue is used for putaway.
24 tive (EWM) Goods are moved from staging area to Mezzanine.
Check Inbound Delivery (Op- Receiving Specialist Log On to RF Environ- All inbound delivery items should have been updated and the correct stock posting situation has been
tional) [page ] 54 ment documented.
In addition, you can check the stock situation in stock overview.
Putaway of products to the High Rack Narrow Aisle:
Process Step Business Role Transaction Code/APP Expected Results
Create Purchase Order [page ] 17 Purchaser Create Purchase Order Purchase order created and distributed to vendor.
Advanced

Overview Table © 2018 SAP SE or an SAP affiliate company. All rights reserved. 13
Process Step Business Role Transaction Code/APP Expected Results
Create EWM Inbound Delivery [page ] 19 Warehouse Clerk Create Inbound Deliver- The inbound delivery is created with reference to the PO created in SAP S/4HANA sys-
(EWM) ies - Deliveries tem.
Process Goods Receipt [page ] 21 Warehouse Oper- Test RF Environment The goods receipt is posted by function “Receiving of Handling Units by ASN”.
ative (EWM) HUs are created for various products. Therefore, the user enters an HU ID (preprinted)
and the packaging material. The quantity is entered during goods receipt.
Check Warehouse Orders (Optional) [page ] 24 Warehouse Clerk Warehouse Monitor Check the WO assignment to Inbound RF queues.
(EWM)
Move Pallets from Staging Area to Handover Warehouse Oper- Test RF Environment Goods are moved from staging area to Handover Point.
Point [page ] 31 ative (EWM)
Putaway of Products from the Handover Point Warehouse Oper- Test RF Environment Putaway WTs are confirmed in RF and System Guidance by Queue is used for putaway.
to the High Rack Pallet Buffer [page ] 33 ative (EWM) Goods are moved from staging area to High Rack Pallet Buffer.
Check Inbound Delivery (Optional) [page ] 54 Receiving Special- All inbound delivery items should have been updated and the correct stock posting situ-
ist ation has been documented.
Putaway of products to the Bulk Storage:

Advanced
Create EWM Inbound Delivery [page ] 19 Warehouse Clerk Create Inbound Deliv- The inbound delivery is created with reference to the PO created in SAP S/4HANA sys-
(EWM) eries - Deliveries tem.

Check Warehouse Orders (Optional) [page ] 24 Warehouse Clerk Warehouse Monitor Check the WO assignment to Inbound RF queues.
(EWM)
Putaway of Products [page ] 24 Warehouse Oper- Test RF Environment Putaway WTs are confirmed in RF and System Guidance by Queue is used for putaway.
ative (EWM) Goods are moved from staging area to Mezzanine.
Goods are moved from staging area to Mezzanine.
Putaway of Products from the Handover Point to Warehouse Oper- Test RF Environment Putaway WTs are confirmed in RF and System Guidance by Queue is used for putaway.
the High Rack Pallet Buffer [page ] 33 ative (EWM) Goods are moved from staging area to High Rack Pallet Buffer.
Putaway of products from Clarification Zone:

Advanced
Create EWM Inbound Delivery [page ] 19 Warehouse Clerk Create Inbound Deliver- The inbound delivery is created with reference to the PO created in SAP S/4HANA sys-
(EWM) ies - Deliveries tem.
Move Products from Clarification Zone to Mez- Warehouse Oper- Test RF Environment Check the WO assignment to Inbound RF queues.
zanine [page ] 52 ative (EWM)
Repack at the Clarification Zone [page ] 49 Warehouse Clerk Pack Handling Units Products are repacked into the correct packaging materials.
(EWM)
Create Warehouse Tasks to Move Handling Warehouse Clerk Create Warehouse Tasks Ad-hoc warehouse tasks for the movement of the product from the clarification zone to
Units from the Clarification Zone [page ] 51 (EWM) – Handling Units the final storage bin are created.
Move Products from Clarification Zone to Mez- Warehouse Oper- Test RF Environment Products are moved from the clarification zone to the final storage.
zanine [page ] 52 ative (EWM)

4 Test Procedures
This section describes test procedures for each process step that belongs to this scope item.
4.1 Create Purchase Order
Test Administration
Customer project: Fill in the project-specific parts.
Test Case ID <X.XX> Tester Name Testing Date Enter a test date.
Business Role(s)
Responsibility <State the Service Provider, Customer or Joint Service Provider and Customer> Duration Enter a duration.
Test Test Step Name Instruction Expected Result Pass / Fail /

Step # Comment
1. Log on Open the Fiori Launch Pad with the Purchaser role. The Fiori launchpad is displayed.
2. Access the App Open Create Purchase Order – Advanced. The Create Purchase Order screen
is displayed.
3. Enter Head Data Enter the following data :

Order Type : Standard PO
Vendor :
Doc.date : Current date
If the Header data is not visible, choose Expand Header .
Choose the Org.Data tab page.
Enter the following data :
Purchasing Org : 1710

Test Procedures © 2018 SAP SE or an SAP affiliate company. All rights reserved. 17
Step # Comment
Purchasing Group : 002
Company Code : 1710
4. Enter Default Value for If the Item Overview is not visible, choose Expand Items.
Item Data Choose Default Values (lower screen area!) .
The Item Default Values dialog box appears, make the following entries:
Plant : 1710
Storage Location : 171D
Choose Save.
5. Enter Data for the 1st Enter the following data :

Item Material: See Table 1 at the end of this table
PO Quantity: See Table 1 at the end of this table
OUn : See Table 1 at the end of this table
Note Pay attention to the destination storage for your selected entry, you then fol-low the dif-
ferent chapters to execute putaway process.
6 Save Purchase Order Choose Enter. A new Purchase Order is created.

Check and correct the entries for error messages if there are any.
Choose Save.
Note down the standard PO for later use.
7 Repeat the steps Repeat the steps 3-6 for other POs
Table 1:
Purchase Order Item Material PO Quantity OUn Destination Storage Note
1st PO 10 EWMS4-01 2 CAR Mezzanine
2nd PO 10 EWMS4-10 8 PC High Rack Pallet Buffer 2 Pallets
20 EWMS4-11 6 PC High Rack Pallet Buffer 1 Pallet
3rd PO 10 EWMS4-40 72 CAR Product for Bulk Storage A, Short Lane (Partial Pallet Al-lowed) 2 Pallets
20 EWMS4-41 48 CAR Product for Bulk Storage A, Long Lane (Partial Pallet Allowed) 1 Pallets

Purchase Order Item Material PO Quantity OUn Destination Storage Note
30 EWMS4-42 12 PC Product for Bulk Storage B (Partial Pallet not allowed) 2 Pallets
4th PO 10 EWMS4-02 5 CAR Clarification Zone Exceeds the bin volume in the mezzanine
4.2 Create EWM Inbound Delivery
Test Administration
Business Role(s)
Purpose
Upon creation of the inbound delivery, the external delivery note IDN (ASN) is entered and later used as reference criterion for Goods Receipt.
Procedure

Step Comment
1 Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) role. The Fiori Launch Pad is dis-
played.
2 Access the App Open Create Inbound Deliveries – Deliveries

Step Comment
3 Enter the Selec- Enter following Data
tion Data Vendor:
Planned Dlv. Date :
Start Date = Today – 1 Day
End Date = Today + 1 Month
Choose Go.
4 Choose the Pur- Click on the purchase order you have created. The purchase order items are
chase Order shown in the item list.
5 Enter the ASN Enter following Data

number ASN: For example, ASN-45-#### where #### are the last "significant" digits
of the corresponding Purchase Order ID. Example: ASN-45-0031
Note Here is an example. Normally the ASN number comes from supplier.
6 Select all the Mark the check box on the left hand side of column Product All the items are selected.
items
7 Create Delivery Choose button Create Delivery.

Note the ID of the Inbound Delivery on your ID sheet.
Note the ASN (Delivery Note) Number on your ID sheet.
4.3 Putaway to the Mezzanine
Test Administration
Business Role(s)

Purpose
An operator with an RF device picks up the storage containers from the GR zone (for example, the HU containing 1 CAR of product EWMS4-01) and moves it to the Mezzanine. At the destination
bin, the operator scans the bin, packs the cartons into the bin, and then returns the empty storage container to the GR zone.
The HU that contains 1 CAR of small part EWMS4-01 is to be put away to the Mezzanine. The putaway Warehouse Task is to be confirmed in the Radio Frequency environment. You use the
queue or Handling Unit number to search for the putaway warehouse task.
4.3.1 Process Goods Receipt
Test Administration
Business Role(s)
Purpose
The warehouse operators at the inbound staging area are equipped with:
● an RF device
● a roll of pre-printed and barcoded HU labels
They are responsible for labeling and – if necessary – repacking the items (in real life but not supported by system functions), then posting goods receipt and creating subsequent putaway ware-
house tasks in the system.

The system’s putaway strategy takes into account the “quantity classification” (that is, the system checks whether the actual quantity of a HU is a pallet or carton quantity via the product mas-
ter’s conversion factors):
Procedure
Test Test Step Name Instruction Expected Result Pass /

Step Fail /
# Com-
ment
1 Log on Open the Fiori Launchpad with the Warehouse Operative (EWM) The Fiori Launchpad is displayed.
role.
2 Log On to RFUI Open Test RF Environment. The RFUI screen is displayed.

Environment
3 Enter Data for Whse No: 1710

RFUI Resource: YREC-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu Choose 03 Inbound Processes > 04 Receiving of Handling Units > 04
for Goods Re- Rec. HU by ASN
ceipt
5 Enter ASN num- Enter the ASN number from step 4.2
ber Choose Enter twice.
6 Enter Goods Re- Choose F2 NewHU. And enter the following values for the item: System automatically allocates the material EWMS4-01 via its EAN for Unit
ceipt Data for Prod.: 9783836214230 of Measure CAR.
EWMS4-01
Press Enter after you have entered the EAN or product ID before you Default UoM for the EAN number is filled automatically when using the
enter the other fields (a real mobile device would do this automati- EAN
cally)
ActQty: 2
UoM: CAR
Choose F1 Next.
Note Alternatively, you can enter the product ID EWMS4-01

Step Fail /
# Com-
ment
7 Enter Packaging Enter the packaging material:
Material New P.Mat.: EWMS4-STOCON00
Choose EnterNote the HU ID created by the system on your ID sheet.
8 Post Goods Re- Choose Enter. The Goods Receipt is now posted.
ceipt Choose F2 PGr.
Note The Unloaded field is automatically filled with X after choosing
F2 PGr, meaning the unloading from truck to staging area is con-
firmed implicitly.
9 Create Ware- Choose F3 CrWT. The Putaway Warehouse Task is created.

house Task Note You could directly continue with the warehouse task confirma- The system created put-away warehouse tasks which can now be processed
tion dialog using F4 Conf, but in this example process the assump- by other operators/resources.
tion is that this is done separately in the next process step by another Put-away strategy for the two HUs containing the small part EWMS4-01:
warehouse operator/resource.
The HU containing a full pallet quantity (here: 48 PC = 8 CAR = 1 PAL) is
moved to the Narrow Aisle High Rack Pallet Buffer (via the handover point).
10 Logoff RFUI Press F7 four times to go back. All the goods have been packed (HUs created), unloaded and posted GR. If
Press F1 Logoff. you followed the example process accurately, you have created 1 HU in to-
tal.
Press F1 Save.
During the processing, HUs were created. All HUs are located in the GR
zone at this point of time.
Fiori tile Pack Handling Units can be used to display the storage type Y910
(at the same time a work center) for an overview of the HUs located at the
Goods Receipt Zone / Inbound Staging Area. In this view, you can also see
the Putaway Warehouse which was created in the steps before.

4.3.2 Check Warehouse Orders (Optional)
Test Administration
Business Role(s)
Purpose
At this stage of the process, the goods receipt has been posted, and respectively, the warehouse tasks have been created to move Handling Units to the next stop. Those warehouse tasks can
include the Mezzanine, the handover point for the High Rack Buffer, the Bulk Storage , and the clarification zone and so on. A supervisor may check the destinations of the HUs for an overview of
the open workload.
Procedure
See the chapter Warehouse Management Monitor Handling [page ] 56 in the Appendix for details
4.3.3 Putaway of Products
Test Administration

Business Role(s)
Purpose
An operator with an RF device picks up the storage containers from the GR zone (for example, the HU containing 2 CAR of product EWMS4-01) and moves it to the Mezzanine. At the destination
bin, the operator scans the bin, packs the cartons into the bin, and then returns the empty storage container to the GR zone.
The HU that contains 2 CAR of small part EWMS4-01 is to be put away to the Mezzanine. The putaway Warehouse Task is to be confirmed in the Radio Frequency environment. You use the
queue or Handling Unit number to search for the putaway warehouse task.
Procedure
Test Test Step Instruction Expected Result Pass /

Step Name Fail /
# Com-
ment
1 Log on Open the Fiori Launch Pad with the EWM Warehouse Worker role. The Fiori Launch Pad is displayed.
2 Log On to Open Test RF Environment. The RFUI screen is displayed.

RFUI Envi-
ronment
3 Enter Data Whse No: 1710

for RFUI Resource: YMEZZ-1
DefPresDvc: YE00
Choose Enter.
4 Choose Choose 01 System Guided > 02 System Guided by Queue .

Menu
5 Enter Queue In the Queue field, enter YI-910-021.

Name

Step Name Fail /
# Com-
ment
Note It is likely that in the System-Guided Selection, certain unfinished ware-
house activities may appear instead of the expected task. If this is the case,
choose 03 Inbound Process > 03 Putaway > 01 Putaway by HU and enter the
corresponding HU number in the HU field to process the task.
6 Enter HU Enter the HU ID from step Process the Goods Receipt

HU: For example, 8#######
The HU ID from the previous step, containing 2 CAR EWMS4-01.
7 Verify the Verify the Dest.Bin (Destination Bin): 021.##.##.## The warehouse tasks for the movement of the products in car-
Destination Choose Enter. tons/pieces from the staging area to the Mezzanine are now confirmed
Bin in the system. As soon as the final putaway is completed, the HU num-
ber is deleted in the system and the stock is located in the final destina-
tion bin.
The system automatically changes the stock type for this stock from "in
putaway" (F1) to "available for sale" (F2).
8 Logoff You can use function key F7 to go back to previous screens.

RFUI Choose F1 Logoff.
Choose F1 Save.
4.4 Putaway to the High Rack Narrow Aisle
Test Administration

Business Role(s)
Purpose
● an RF device
Procedure

Step Fail /
# Com-
ment
1 Log on Open the Fiori Launchpad with the Warehouse The Fiori Launchpad is displayed.
Operative (EWM) role.
2 Log On to RFUI En- Open Test RF Environment. The RFUI screen is displayed.
vironment
3 Enter Data for RFUI Whse No: 1710

Resource: YREC-1
DefPresDvc: YE00
Choose Enter.

Step Fail /
# Com-
ment
4 Choose Menu for Choose 03 Inbound Processes > 04 Receiving of
Goods Receipt Handling Units > 04 Rec. HU by ASN
5 Enter ASN number Enter the ASN number from step 4.2
Choose Enter twice.
6 Enter Goods Receipt Choose F2 NewHU.

Data for 4 PC of Enter the following values for the item.
EWMS4-10
Prod.: 9781592292868
Press Enter after you have entered the EAN or
product ID before you enter the other fields (a
real mobile device would do this automati-
cally):
ActQty: 4
UoM: PC
Choose F1 Next.
Note Alternatively, you can enter the product
ID EWMS4-10

Material New P.Mat.: EWMS4-PAL00
Press Enter.
Note the HU ID (SSCC numbering) created by
the system on your ID sheet.
8 Post Goods Receipt Press Enter. The Goods Receipt is now recorded.
Choose F2 PGr.
9 Create Warehouse Choose F3 CrWT. The Putaway Warehouse Task is created.

Task Press F7 to go back. Put-away strategy for the HU containing the large parts EWMS4-10 :
The HU with the large parts EWMS4-10 is always moved to the Narrow Aisle High Rack Pallet
Buffer (via the handover point).

Step Fail /
# Com-
ment
10 Post Goods Receipt Repeat step 6 – 9 and create the 2nd HU for
for 2nd HU for Product: EWMS4-10
EWMS4-10 with 4
PCs Quantity: (again with) 4 PC

Data for 6 PC of Enter the following values for the item.
EWMS4-11
Prod.: 9781592294091
Press Enter after you have entered the EAN or
product ID before you enter the other fields (a
real mobile device would do this automati-
cally):
ActQty: 6
UoM: PC
Choose F1 Next.
Note Alternatively, you can enter the product
ID EWMS4-11

Material New P.Mat,.: EWMS4-PAL00
Press Enter.
Note the HU ID (SSCC numbering) created by
the system on your ID sheet.
Choose F2 PGr.

Task Put-away strategy for the HU containing the large parts EWMS4-11:
The HU with the large parts EWMS4-11 is always moved to the Narrow Aisle High Rack Pallet
Buffer (via the handover point).

Step Fail /
# Com-
ment
15 Logoff RFUI Press F7 four times to go back. All the goods have been packed (HUs created), unloaded and posted GR. If you followed the
Press F1 Logoff. example process accurately, you have created 3 HUs in total.
Press F1 Save. During the processing, HUs were created. All HUs are located in the GR zone at this point of
time.
Fiori tile Pack Handling Units can be used to display the storage type Y910 (at the same time a
work center) for an overview of the HUs located at the Goods Receipt Zone / Inbound Staging
Area. In this view, you can also see the Putaway Warehouse which was created in the steps
before.
For those HUs which are finally put away in the Narrow Aisle Pallet Buffer, the system already
created 2 warehouse tasks as there is an intermediate step via the handover point. As long as
the task to move the HUs from the inbound staging area to the handover point is not yet con-
firmed, the final putaway task with destination storage type Y011 is in status B – Waiting.
At the same time, you can display the inbound delivery along with the created warehouse
tasks and Handling Units in the Warehouse Monitor APP ( Inbound > Documents > Inbound
Delivery ).
Test Administration
Business Role(s)

Purpose
the open workload.
Procedure
See the chapter Warehouse Management Monitor Handling in the Appendix for details.
4.4.3 Move Pallets from Staging Area to Handover Point
Test Administration
Business Role(s)
Purpose
Before pallets are finally put away to the Narrow Aisle High Rack Storage, an operator first has to move them to the handover point (a handover point is an interim storage type physically located
adjacent to or attached to the High Rack Storage).
The operator confirms the putaway warehouse tasks using the Radio Frequency environment. You use either Queue or Handling Unit number to search for the putaway warehouse task.

Procedure

Step Name Fail /
# Com-
ment
1 Log on Open the Fiori Launch Pad with the Warehouse Operative (EWM) role. The Fiori Launch Pad is displayed.
2 Log On to Open Test RF Environment. The RFUI screen is displayed.

RFUI En-
vironment

for RFUI
Resource: YLLTR-1
DefPresDvc: YE00
Choose Enter.
4 Choose Choose 01 System Guided > 02 System Guided by Queue .

Menu
5 Enter In the Queue field, enter YI-910-001.

Queue Choose Enter.
Name
All HUs from this step which are a “Pallet Handling Unit” are moved to the High Rack handover point in
this process step.It is likely that in the System-Guided Selection, certain unfinished warehouse activities
may appear instead of the expected task. If this is the case, choose 03 Inbound Process -> 03 Putaway ->
01 Putaway by HU and enter the corresponding HU number in the HU field to process the task.
6 Enter HU Enter the HU ID from Check Warehouse Orders :

HU : 12345678#######Choose Enter.
The HU ID from the previous step, containing 4 CAR (= 1 PAL) EWMS4-10.
7 Verify the Verify the Dest.Bin (destination bin) field.

Destination Note the storage bin on the ID sheet.
Bin
Choose Enter.
Note Low-level trucks first move the pallets from the staging area to storage type Y001 (handover point)
before they are finally put away to the storage type Y011 (High Rack Storage). For example, a pallet be-
ing put away to Y001 – 02IN – 001.02.00 means it is put away to storage Y001, storage section
02IN (Incoming section for aisle 02) and storage bin 001.02.00, which is the storage bin assigned to the
Step Name Fail /
# Com-
ment
specific storage type and storage section combination. Y001 – 01IN – 001.01.00 means the in-
coming section for aisle 01.
8 Repeat Repeat steps 4-7 three times. Note The warehouse tasks for the movement
Steps ● for the another HU of product EWMS4-10. and of goods in pallets from the staging area to the
handover point are confirmed. The previously
● the HU product EWMS4-11. Take a note of the storage bins.
inactive WT for putaway from handover point
to High Rack storage is now active.
9 Logoff After you have processed all the HUs, use function key F7 to go back to previous screens.
RFUI Choose F1 Logoff.
Choose F1 Save.
4.4.4 Putaway of Products from the Handover Point to the High Rack Pallet Buffer
Test Administration
Business Role(s)

Purpose
The HUs are situated at the handover points of the different aisles. An operator (using a high-level truck) picks up the HUs at the handover point and moves them to their destination bins in the
upper level of the pallet rack.
Procedure
Test Test Step Instruction Expected Re- Pass / Fail

Step # Name sult / Com-
ment
1 Log on Open the Fiori Launch Pad with the Warehouse Operative (EWM) role. The Fiori
Launch Pad is
displayed.
2 Log On to Open Test RF Environment. The RFUI

RFUI Envi- screen is dis-
ronment played.

for RFUI
Resource:
YHLTR01-1
For putaway in aisle 01
YHLTR02-1
For putaway in aisle 02
DefPresDvc: YE00
Choose Enter.
Note Use resource high-level truck YHLTR01-1 for putting away pallets from the handover point to the first aisle of the High Rack
Buffer;
Use YHLTR02-1 for putting away pallets to the second aisle.
Check your data sheet to find out which aisle your pallets go to.
4 Choose Menu Choose 01 System Guided > 02 System Guided by Queue .
5 Enter Queue In the Queue field, enter the following:

Name ● YI-001-N01
Test Test Step Instruction Expected Re- Pass / Fail
Step # Name sult / Com-
ment
in case the putaway is intended in a bin of aisle 01 with resource YHLTR01-1.
● YI-001-N02
In case the putaway is intended in a bin of aisle 02 with resource YHLTR02-1.
Choose Enter.
Note Which queue is to be used depends on to which aisle the pallets are to be put away. Check your data sheet to find out.It is
likely that in the System-Guided Selection, certain unfinished warehouse activities may appear instead of the expected task. If this
is the case, choose 03 Inbound Process > 03 Putaway > 01 Putaway by HU and enter the corresponding HU number in the HU field to
process the task.
6 Verify the Verify the Source HU field by entering the HU number for the pallet to be put away to the first aisle of the High Rack Storage.
Source HU Choose Enter.
7 Verify the Verify the Dest.Bin (Destination Bin): 011.##.##.##

Destination
Choose Enter.
Bin
8 Repeat Steps Repeat step 6-7 for the remaining warehouse tasks to put away pallets to the first aisle of the High Rack Storage.
9 Logoff RFUI You can use function key F7 to go back to previous screens.
Choose F1 Logoff,
Choose F1 Save.
10 Repeat Steps Log on to the Test RF environment using resource YHLTR02-1 and execute using queue YI-001-N02 as described in steps 3-8 to
accomplish the warehouse tasks for the second aisle.
Note Ideally, the operators in the two aisles work in the RF environment and are system-guided. This way, the system can ensure
that after a putaway task, the operator performs a replenishment/picking task instead of returning (without a HU) to the handover
point for the next putaway.
-> Task interleaving is activated for these queues
The putaway tasks for your inbound delivery will end up in both aisles (due to cross-line putaway strategy).The warehouse tasks for
the movement of the goods in pallets from the handover point into to the High Rack Storage of both aisles are confirmed.
The HU information for the pallets is kept in the system. The physical stock is now “available for sale” (c.f. stock type F2).

4.5 Putaway to the Bulk Storage
4.5.1 Process the Goods Receipt
Test Administration
Business Role(s)
Context
● an RF device
● For the material EWMS4-40, two handling units with 36 CAR (= 1 PAL) for each HU/pallet are put away in the short lane of the storage type Y041Bulk Storage A.
● For the material EWMS4-41, one handling unit / pallet with 48 CAR ((= 1 PAL) are put away in the long lane of the storage type Y041Bulk Storage A.
● For the material EWMS4-42, two handling units with a quantity of 6 EA (= 1 PAL) for each HU / pallet are put away in the storage typeY042Bulk Storage B.

Procedure

Step Fail /
# Com-
ment
1 Log on Open the Fiori Launchpad with the Warehouse Operative (EWM) The Fiori Launchpad is displayed.
role.
vironment

Resource: YREC-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu for Choose 03 Inbound Processes > 04 Receiving of Handling Units >
Goods Receipt 04 Rec. HU by ASN
Choose Enter twice.

Data for 36 CAR of Enter the following values for the item.
EWMS4-40
Prod.: 9781592294121
Press Enter after you have entered the EAN or product ID before
you enter the other fields (a real mobile device would do this au-
tomatically):
ActQty: 36
UoM: CAR
Choose F1 Next.
Alternatively, you can enter the product ID EWMS4-40
Make sure you enter 36CAR (the 72 CAR from the PO item are
physically split up into two full-pallets /HUs)

Step Fail /
# Com-
ment
7 Enter Packaging Ma- Enter the packaging material:
terial New P.Mat.: EWMS4-PAL00
Press Enter.
Note the HU ID (SSCC numbering) created by the system on your
ID sheet.
The packaging material’s HU Type is one factor that determines
how many pallets set a bulk lane to “full”
Choose F2 PGr.

Task Press F7 to go back. Put-away strategy for the HU containing the large parts EWMS4-10 :
You could directly continue with the warehouse task confirmation The HU with the large parts EWMS4-10 is always moved to the Narrow
dialog using F4 Conf, but in this example process the assumption Aisle High Rack Pallet Buffer (via the handover point).
is that this is done separately in the next process step by another
warehouse operator/resource.
10 Repeat Steps for Repeat Step 6 to 9 and create the second HU for
Goods Receipt of an- Product: EWMS4-40
other 36 CARs of
EWMS4-40 Quantity:(again with) 36 CAR

Data for 48 CARs of Enter the following values for the item.
EWMS4-41
Prod.: 9781592294497
tomatically)
Alternatively, you can enter the product ID <EWMS4-41>
ActQty: 48
UoM: CAR

Step Fail /
# Com-
ment
Choose F1 Next.
Default UoM for the EAN number that is filled automatically
when using the EAN.

Press Enter.
Note the HU ID (SSCC numbering) creat-ed by the system on
your ID sheet.
Choose F2 PGr.

Task Press F7 to go back.

Data for 6 PCs of Enter the following values for the item.
EWMS4-42
Prod.: 9781592293858
tomatically)
Alternatively, you can enter the product ID <EWMS4-42>
ActQty:6
UoM:PC
Choose F1 Next.
Default UoM for the EAN number that is filled automatically
when using the EAN.
Make sure you enter 6 PC (the 12 PC from the PO item are physi-
cally split up into two full-pallet HUs)

Step Fail /
# Com-
ment
Press Enter.
Note the HU ID (SSCC numbering) created by the system on your
ID sheet.
The packaging material’s HU Type is one factor that determines
how many pallets set a bulk lane to “full”.
Choose F2 PGr.

Task Press F7 to go back.
19 Repeat Steps for Repeat Step 15 to 18 and create the sec-ond HU for
Goods Receipt of an- Product: EWMS4-42
other 6 PCs of
EWMS4-42 Quantity:(again with) 6 PC
20 Logoff RFUI Press F7 four times to go back. All the goods have been packed (HUs created), unloaded and posted GR.
Press F1 Logoff. If you followed the example process accurately, you have created 5 HUs in
total.
Press F1 Save.
During the processing, HUs were created. All HUs are located in the GR
zone at this point of time.
Fiori tile Pack Handling Units can be used to display the storage type Y910
(at the same time a work center) for an overview of the HUs located at the
Goods Receipt Zone / Inbound Staging Area. In this view, you can also see
the Putaway Warehouse which was created in the steps before.
The system created put-away warehouse tasks which can now be pro-
cessed by other operators/resources.
Put-away strategy for respective warehouse products are as the follow-
ing:

Step Fail /
# Com-
ment
● Two full-pallet HUs containing product EWMS4-40(360 PC = 36 CAR =
1 PAL) are moved to the Bulk Storage A to a “Short Lane” bin.
● One full-pallet HU containing product EWMS4-41(480 PC = 48 CAR =
1 PAL) is moved to the Bulk Storage A to a “Long Lane” bin.
● Two full-pallet HUs containing product EWMS4-42(6 PC = 1 PAL) are
moved to the Bulk Storage B to a “Short Lane” bin (Bulk B only has
short lanes).
Test Administration
Business Role(s)
Purpose
the open workload.

Procedure
See the chapter Warehouse Management Monitor Handling [page ] 56in the Appendix for details.
4.5.3 Putaway of Products to Bulk Storage
Test Administration
Business Role(s)
Purpose
An operator (operating a low-level truck) picks up the HUs at the inbound staging area and moves them to their destination bins in the Bulk Storage.
The operator confirms the putaway warehouse tasks using radio frequency environment. You use either the queue or handling unit number to search for the putaway ware-house task.
Procedure

Step Fail /
# Comment
1 Log on Open the Fiori Launch Pad with the EWM Warehouse Worker role. The Fiori Launchpad is displayed.
2 Log On to RFUI Open Test RF Environment. The RFUI screen is displayed.

Environment

Step Fail /
# Comment
RFUI Resource: YLLTR-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu Choose 01 System Guided > 02 System Guided by Queue
5 Enter Queue Name In the Queue field, enter YI-910-041.

Choose Enter.
Note It is likely that in the System-Guided Selection, certain unfinished warehouse activities
may appear instead of the expected task. If this is the case, choose 03 Inbound Process > 03
Putaway > 01 Putaway by HU and enter the corresponding HU number in the HU field to pro-
cess the task.
6 Enter HU Enter the HU ID from previous step

HU: 112345678#########
Choose Enter.
Note The first HU ID from the previous step, containing 36 CAR (= 1 PAL) of product EWMS4-
40.
7 Verify the Desti-na- Verify the Dest.Bin (Destination Bin): 041.##

tion Bin Note the storage bin.
Choose Enter.
8 Repeat Steps for the Repeat steps 3-7 for the 2nd HU of product EWMS4-40
2nd HU of product
EWMS4-40
9 Repeat Steps for the Repeat steps 3-7 for the HU of product EWMS4-41
HU of product
EWMS4-41
10 Choose Back After you have processed all the HUs in the specific queue, the system displays the message
‘E: Suitable warehouse orders were not found’. Use function key F7 to go back to previous
screens.

Step Fail /
# Comment
11 Choose Menu Choose 01 System Guided > 02 System Guided by Queue .
12 Enter Queue Name In the Queue field, enter YI-910-042.

Choose Enter.
It is likely that in the System-Guided Selection, certain unfinished warehouse activities may
appear instead of the expected task. If this is the case, choose 03 Inbound Process > 03 Puta-
way > 01 Putaway by HU and enter the corresponding HU number in the HU field to process
the task.
13 Enter HU Enter the HU ID from previous step The Goods Receipt is now recorded.
HU: 112345678#########
Choose Enter.
The first HU ID from the previous step, containing 6 PC (= 1 PAL) EWMS4-42.
14 Verify the Desti-na- Verify the Dest.Bin (Destination Bin): 042.## The Putaway Warehouse Task is created.
tion Bin Note the storage bin.
Choose Enter.
15 Repeat Steps for the Repeat steps 12-14 for the 2nd HU of product EWMS4-42
2nd HU of product
EWMS4-42
16 Choose Back After you have processed all the HUs in the specific queue, the system displays the message
‘E: Suitable warehouse orders were not found’. Use function key F7 to go back to previous
screens.
17 Logoff RFUI You can use function key F7 to go back to previous screens. The warehouse tasks for the movement of the
Choose F1 Logoff. goods in pallets from the staging area to the
Bulk Storage are confirmed and putaway has
Choose F1 Save.
been completed.
The system automatically changes the stock
type for this stock from “in puta-way” (F1) to
“available for sale” (F2).

4.6 Putaway from Clarification Zone
Test Administration
Business Role(s)
Purpose
● an RF device

Procedure

Step # Fail /
Comment
1 Log on Open the Fiori Launchpad with the Warehouse Op- The Fiori Launchpad is displayed.
erative (EWM) role.
vironment

Resource: YREC-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu for Choose 03 Inbound Processes > 04 Receiving of Han-

Goods Receipt dling Units > 04 Rec. HU by ASN
Choose Enter twice.

Data for 5 CAR of Enter the following values for the item.
EWMS4-02
Prod.: 9783836218122
Press Enter after you have entered the EAN or prod-
uct ID before you enter the other fields (a real mo-
bile device would do this automatically).
ActQty: 5
UoM: CAR
Choose F1 Next.
Note Alternatively, you can enter the product ID
EWMS4-02

terial New P.Mat.: EWMS4-WBTRO00
Press Enter.
Step # Fail /
Comment
Note the HU ID (internal numbering) created by the
system on your ID sheet.
Choose F2 PGr.

Task Put-away strategy for the HU containing EWMS4-02
The HU containing the small part EWMS4-02 is moved to the clarification zone since
the content of the handling unit exceeds the bin volume in the Mezzanine. The HU
needs to be repacked first and split up into 2 units before being moved to the Mezza-
nine.
10 Logoff RFUI Press F7 four times to go back. All the goods have been packed (HUs created), unloaded and posted GR. If you fol-
Press F1 Logoff. lowed the example process accurately, you have created 1 HUs in total.
Press F1 Save. During the processing, HUs were created. All HUs are located in the GR zone at this
point of time.
Fiori tile Pack Handling Units can be used to display the storage type Y910 (at the same
time a work center) for an overview of the HUs located at the Goods Receipt Zone / In-
bound Staging Area. In this view, you can also see the Putaway Warehouse which was
created in the steps before.
At the same time, you can display the inbound delivery along with the created ware-
house tasks and Handling Units in the Warehouse Monitor APP ( Inbound > Documents
> Inbound Delivery ).
4.6.2 Move Products to Clarification Zone
Test Administration

Business Role(s)
Purpose
Due to a violation of the maximum bin volume, the system could not determine a valid bin. As a result, the system creates a warehouse task to move the HU to the clarification zone waiting for
further processing (“clearing”).
Procedure

Step # Comment
1 Log on Open the Fiori Launch Pad with the Warehouse Operative (EWM) role. The Fiori Launch
Pad is displayed.
2 Log On to RFUI Open Test RF Environment. The RFUI screen

Environment is displayed.

RFUI
Resource: YLLTR-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu Choose 01 System Guided -> 02 System Guided by Queue.
5 Enter Queue In the Queue field, enter YI-910-970.

Name Note It is likely that in the System-Guided Selection, certain unfinished warehouse activities may appear instead of the ex-
pected task. If this is the case, choose 03 Inbound Process -> 03 Putaway -> 01 Putaway by HU and enter the corresponding
HU number in the HU field to process the task.
6 Enter HU num- Enter the HU ID from Step the Inbound processing of EWMS4-02 / 5 CAR:
ber HU: For example, 8#######
Step # Comment
Choose Enter.
Note The HU ID from the inbound processing step, containing 5 CAR EWMS4-02.
7 Verify the Des- Verify the Dest.Bin (Destination Bin)

tination Bin DstBin: 970.00.00
Choose Enter.
Note The warehouse tasks for the movement of the goods from the staging area to the clarification zone are confirmed and
the product is ready for further processing. The stock is still in stock type F1 (“In Putaway”).
Choose F1 Logoff.
Choose F1 Save.
4.6.3 Repack at the Clarification Zone
Test Administration
Business Role(s)
Purpose
The clearing operator investigates the HU and decides that the product needs to be repacked into the correct packaging materials. The clearing operator repacks the product into two storage
containers with the correct quantity, that is, the quantity (number of cartons) along with the related volume does not violate the bin’s volume capacity in the Mezzanine.

Procedure
Test Test Step Instruction Expected Result Pass / Fail

Step # Name / Com-
ment
1 Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) role. The Fiori Launch Pad is displayed.
2 Access the Choose Pack Handling Units. The Packing screen is displayed.
App
3 Enter Se- On the Work Center Clarification Zone screen, make the following entries:
lection Whse No: 1710
Data
Work Center: Y970
Choose Execute.
4 Adjust On the Work Center Clarification Zone screen, navigate to the Control tab page.
Default Deselect the Propose Dest. HU checkbox.
Settings
5 Repack Navigate to the Repack Product tab page and create the following entries:
Src HU/Bin: 8######( HU number created in for product EWMS4-02 / 5 CAR )
Prod/HU/BI: EWMS4-02 or 9783836218122
Quantity: 4 CAR
Pack. Materia: EWMS4-STOCON00
Storage Bin: 970.00.00
Choose Execute.
Note the new HU number created in the Clarification Zone (in the Section/Bin/HU/Item area on the left
of the screen).
Note To have the system propose the data, you can choose the Stock button.Make sure you adapt the
quantity to 4 CAR; otherwise, no warehouse task to move to the Mezzanine is created.Repack at the
main storage bin 970.00.00 of the clarification zone.
6 Repeat Repeat the step 5 for the remaining 1 CAR until the Source Handling Unit is emptied. The content of the HU for product EWMS4-02
Step Note Since this is not part of the inbound storage process, the system does not automatically create in the clarification zone is repacked into
the follow-up warehouse task, that is, the warehouse task to move the new HUs from the clarification EWMS4-STOCON00, and two new HUs are cre-
zone to the Mezzanine. This needs to be done manually by the user and is described in the next pro- ated.
cess step.
Test Test Step Instruction Expected Result Pass / Fail
Step # Name / Com-
ment
The original HU (which used the packaging ma-
terial EWMS4-WBTRO00) is automatically de-
leted by the system once it is empty.
4.6.4 Create Warehouse Tasks to Move Handling Units from the Clarification Zone
Test Administration
Business Role(s)
Purpose
After completing missing parameters for the product master data, you create an ad-hoc warehouse task for the movement of the product from the clarification zone to the final storage bin.
Procedure

Step # Comment
1 Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) role. The Fiori Launch Pad is displayed.

Step # Comment
2 Access the App Click Home on top of the screen to open All My Apps list.
In the App list, choose EWM – Work Scheduling and then choose Create
Warehouse Tasks – Handling Units.
3 Enter Search On the Create HU Warehouse Task in Warehouse Number1710 screen,

Criteria make the following entries:
Find: Handling Unit
Search Criteria ID: HU number
Choose Search.
Note Enter the first HU number noted down in the step Repack at the
Clarification Zone , containing 4 CAR EWMS4-02.
4 Create Ware- Select the entry and choose Switch to Form View. The warehouse task created is now displayed in the Created
house Task In the Warehouse Task sub area, make the following entries: HU WTs tab page.
Whse Proc. Type : Y123

Choose Create (Warehouse Task):
Note Putaway from Cl. Zone.May already be filled with Y123 if you ad-
justed default values for the APP and your user
5 Check Destina- Select the entry and choose Switch to Form View to check the Dest. Stor. You should see a destination bin in the storage type Y021 (Mez-
tion Bin Bin field for the destination bin for putaway. zanine) such as 021.##.##.##
6 Save Warehouse Choose Save. The system issues the message: Warehouse order
Task 2######## created.
7 Repeat Steps Repeat step 2 – 6 for second HU containing 1 CAR EWMS4-02.
4.6.5 Move Products from Clarification Zone to Mezzanine
Test Administration

Business Role(s)
Purpose
Once the warehouse tasks for moving HUs from the clarification zone to the Mezzanine are created in the system, the operator can pick up the HU(s), move them to the destination bin(s) and
confirm the warehouse tasks in the RF environment.
Procedure

Step # Comment
1 Log on Open the Fiori Launch Pad with the Warehouse Operative (EWM) role. The Fiori Launch
Pad is displayed.
2 Log On to RFUI Open Test RF Environment. The RFUI screen

Environment is displayed.

RFUI Resource: YMEZZ-1
DefPresDvc: YE00
Choose Enter.
4 Choose Menu Choose 03 Inbound Process -> 03 Putaway -> 01 Putaway by HU.
Note When you create warehouse tasks and warehouse orders to move HUs from the clarification zone – either to the Mez-
zanine (Storage Type Y021) or to the pallet buffer (final Storage Type Y011), you can also process these task in the RFUI
using the corresponding RF Queues:
YI-970-021
-> in case the putaway is into the Mezzanine

Step # Comment
or
YI-970-00
-> in case the putaway is into the High Rack via the handover point
5 Enter HU num- In the HU field, enter the first HU number noted down from the section Repack at the Clarification Zone.
ber HU: For example, 8#######
The HU ID from the repacking processing step in the clarification zone, containing 4 CAR EWMS4-02.
6 Verify the Des- Verify the Dest.Bin (Destination Bin)

tination Bin DstBin: 021.##.##.##
Choose Enter.
7 Repeat Steps Repeat step 4-6 for the second HU number noted down from the section Repack at the Clarification Zone, containing 1 CAR
EWMS4-02.
Note The warehouse tasks for the movement of the goods from the clarification zone to the Mezzanine are confirmed and
the product has been put away. The stock type automatically changes to F2 Available for Sale.
Choose F1 Logoff.
Choose F1 Save.
4.7 Check Inbound Delivery (Optional)
Test Administration
Business Role(s)

Purpose
In this step, you check the (S/4HANA) Inbound deliveries, which were posted “goods receipt”.
Procedure

Step # Name Comment
1 Log on Open the Fiori Launch Pad with the Receiving Specialist role. The Fiori Launch Pad is displayed.
2 Access the Open Display Inbound Delivery. The Inbound delivery screen is displayed.
App
3 Select In- On the Display Inbound Delivery screen, choose F4 (Matchcode Search).
bound Deliv- In the Delivery (1) dialog box , choose External delivery number of vendor.
ery
If you cannot see this option, choose the button with 3 full stop sign on the
right hand side and choose it from the dropdown menu.
Make the following entry:
External Delivery ID: ASN #
Choose Start Search.
Double-click the inbound delivery.
Enter the ASN / Vendor Delivery Note ID you have entered in step Create
an Inbound Delivery.
4 Display In- On the Display Inbound Delivery screen, choose Enter. Check that the Total goods movement status is set to C-Completely
bound Deliv- On the Inbound Delivery ######## Display: Overview screen, go to the (green background color) for the Overall Status as well as for the De-
ery livery Item Status (usually 4 items).
Status Overview tab page.
Note In addition to checking the inbound deliveries, you can also check the
stock situation on the Available for Sale storage location (171S) with Dis-
play Stock Overview APP.

4.8 Appendix
4.8.1 Warehouse Management Monitor Handling
Test Administration
Business Role(s)
Purpose
The Warehouse Management Monitor is a central tool for the management staff in the warehouse to stay up-to-date with the current situation in the warehouse. It provides a wide range of
queues with which historical and current data can be displayed. Within the monitor, it is also easy to navigate to transactions, assign tasks and warehouse resources and so on.
In this example, you search for the HU numbers, Warehouse Order and Warehouse task numbers specific to an inbound delivery in the Warehouse Management Monitor to facilitate the goods
receipt and putaway warehouse task execution in the RF environment.
Procedure

Step Name Fail /
# Com-
ment
1 Log on Open the Fiori Launch Pad with the Warehouse Clerk (EWM) The Fiori Launch Pad is displayed.
role.

Step Name Fail /
# Com-
ment
2 Access the Choose Warehouse Monitor. The Warehouse Management Monitor screen is displayed.
App
3 Enter the data In the dialog box, make the following entries:
for Warehouse Warehouse Number: 1710
Monitor
Monitor: SAP
Choose Execute.
4 Choose Menu In the hierarchy in the left screen area, choose Inbound >
Documents > Inbound Delivery
A dialog box appears.
5 Enter Inbound In the dialog box, enter the inbound delivery number and The system displays the inbound delivery in the right screen area.
Delivery Num- choose Execute.
ber
6 Display Data Select the inbound delivery, and choose Warehouse Order. The system displays the corresponding WO numbers to this inbound delivery docu-
related to In- Choose Warehouse Task to display the WTs associated with ment. If you choose the WO number, you navigate to the Warehouse Order display
bound Delivery screen with further detailed information, such as the Warehouse Tasks that are con-
the inbound delivery.
tained in the Warehouse Order, the source and destination HU numbers and so on.
Choose Handling Unit to display the HUs associated with the
inbound delivery.
In the Warehouse Monitor, a user can display all relevant
data (for example, warehouse orders, warehouse tasks, HUs
etc.) linked to a particular inbound delivery. This is an effi-
cient way to monitor the progress of the related process.
4.8.2 Succeeding Processes

After completing the activities in this test script, you can continue testing the following business processes:

Process Business Condition
J45 - Procurement of Direct Complete all activities described in the test script of the scope item: Procurement of Direct Materials (J45) (Sections Create Supplier Invoice with PO/GR
Materials ) relation) using the master data from this document.

Typographic Conventions
Type Style Description
Example Words or characters quoted from the screen. These include field names, screen titles, pushbuttons labels, menu names, menu paths, and menu options.
Textual cross-references to other documents.
Example Emphasized words or expressions.
EXAMPLE Technical names of system objects. These include report names, program names, transaction codes, table names, and key concepts of a programming language when
they are surrounded by body text, for example, SELECT and INCLUDE.
Example Output on the screen. This includes file and directory names and their paths, messages, names of variables and parameters, source text, and names of installation,
upgrade and database tools.
Example Exact user entry. These are words or characters that you enter in the system exactly as they appear in the documentation.
<Example> Variable user entry. Angle brackets indicate that you replace these words and characters with appropriate entries to make entries in the system.
EXAMPLE Keys on the keyboard, for example, F 2 or E N T E R .

www.sap.com/contactsap
© 2018 SAP SE or an SAP affiliate company. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or
for any purpose without the express permission of SAP SE or an SAP affili-
ate company.
SAP and other SAP products and services mentioned herein as well as their
respective logos are trademarks or registered trademarks of SAP SE (or an
SAP affiliate company) in Germany and other countries. Please see
http://global.sap.com/corporate-en/legal/copyright/index.epx#trademark
for additional trademark information and notices.
Some software products marketed by SAP SE and its distributors contain
proprietary software components of other software vendors.
National product specifications may vary.
These materials are provided by SAP SE or an SAP affiliate company for in-
formational purposes only, without representation or warranty of any kind,
and SAP SE or its affiliated companies shall not be liable for errors or omis-
sions with respect to the materials. The only warranties for SAP SE or SAP
affiliate company products and
services are those that are set forth in the express warranty statements ac-
companying such products and services, if any. Nothing herein should be
construed as constituting an additional warranty.
In particular, SAP SE or its affiliated companies have no obligation to pursue
any course of business outlined in this document or any related presenta-
tion, or to develop or release any functionality mentioned therein. This doc-
ument, or any related presentation, and SAP SE’s or its affiliated compa-
nies’ strategy and possible future developments, products, and/or platform
directions and functionality are all subject to change and may be changed
by SAP SE or its affiliated companies at any time for any reason without no-
tice. The information in this document is not a commitment, promise, or le-
gal obligation to deliver any material, code, or functionality. All forward-
looking statements are subject to various risks and uncertainties that could
cause actual results to differ materially from expectations. Readers are cau-
tioned not to place undue reliance on these forward-looking statements,
which speak only as of their dates, and they should not be relied upon in
making purchasing decisions.

1FS - Basic Warehouse Inbound Processing From Supplier

Uploaded by

Copyright:

Available Formats

1FS - Basic Warehouse Inbound Processing From Supplier

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1FS - Basic Warehouse Inbound Processing From Supplier

Uploaded by

Copyright:

Available Formats

What are the different types of storage locations mentioned in the document?

What are the different types of storage locations mentioned in the document?

What factors determine where inbound products are put away?

What factors determine where inbound products are put away?

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC

Purpose © 2018 SAP SE or an SAP affiliate company. All rights reserved. 1

Basic Warehouse Inbound Processing from Supplier

Sensitivity: Internal & Restricted

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC

2.1 System Access

Business Role Business Role ID as supplied by SAP Log On

Warehouse Operative (EWM) SAP_BR_WAREHOUSE_OPERATIVE_EWM

Receiving Specialist SAP_BR_RECEIVING_SPECIALIST

2.3 Master Data, Organizational Data, and Other Data

Value UoM EAN Description

EWMS4-02 1 PAL 9783836218122 (CAR) Small Part, Fast-Moving Item

EWMS4-10 1 PAL 9781592292868 (PC) Large Part, Slow-Moving Item

EWMS4-11 1 PAL 9781592294091 (PC) Large Part, Fast-Moving Item

EWMS4-40 1 PAL=360 PC 9781592294121(CAR) Product for Bulk Storage A, Short Lane

EWMS4-41 1 PAL=480 PC 9781592294497(CAR) Product for Bulk Storage A, Long Lane

EWMS4-42 1 PAL=6 PC 9781592293858(PC) Product for Bulk Storage B

Packaging Material Master Data:

Value UoM EAN Description

EWMS4-PAL01 PC US Pallet with SSCC generation

EWMS4-STOCON00 PC EWM Default Storage Container / Box

EWMS4-WBTRO00 PC EWM Default Wire Basket Trolley

Configuration Guide for Material Master Creation Description

BL9 Section Material Master

Supplier Master Data:

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC

Organizational Master Data in the SAP S/4HANA System:

Org. Master Data Value Master Data Details Comments

Company Code 1710

Purchasing Organization 1710

Purchasing Group 002

Storage Location 171D Received on Dock

ERP Warehouse Number 171

Receiving Point 1710

Warehouse Specific Organizational Master Data:

Org. Master Data Value Master Data Details Comments

Supply Chain Unit YWAREHOUSE-1710

EWM Warehouse Number 1710

Entitled to Dispose CZB1710

Goods Receipt Office YWAREHOUSE-1710

Warehouse-Specific Master Data:

Org. Data Value Org. Data Details Comments

Storage Type Y011 Narrow Aisle High Rack Pallet Buffer

Storage Type Y021 Mezzanine

Storage Type Y041 Bulk Storage A (Partial Pallets Allowed)

Storage Type Y042 Bulk Storage B (No Partial Pallets)

Storage Type Y910 Inbound Staging Area

Storage Type Y930 Doors

Storage Type Y970 Clarification Zone

2.4 Business Conditions

Scope Item Business Condition

2.5 Preliminary Steps

Basic Warehouse Inbound Processing from Supplier (1FS_US) PUBLIC

2. Access the App Choose Create Inbound Deliveries - Deliveries.