ZAXIS-5 series

SUPER LONG FRONT

A P P L I C A T I O N & A T T A C H M E N T

Model Code ZX85US-5A

Engine Rated Power 34.1 kW (45.7 HP)
Operating Weight 9 170 - 9 340 kg
 SPECIFICATIONS

ENGINE UNDERCARRIAGE
Model ............................ Yanmar 4TNV94L
Tracks
Type .............................. 4-cycle water-cooled, direct injection Tractor-type undercarriage. Welded track frame using selected
No. of cylinders ............. 4 materials. Side frame welded to track frame.
Rated power
ISO 9249, net ............... 34.1 kW (45.7 HP) at 2 000 min-1 (rpm) Numbers of Rollers and shoes on Each Side
EEC 80/1269, net ........ 34.1 kW (45.7 HP) at 2 000 min-1 (rpm) Upper roller .................. 1
SAE J1349, net ............ 34.1 kW (45.7 HP) at 2 000 min-1 (rpm) Lower rollers ................ 5
Maximum torque ........... 204.1 Nm (20.8 kgfm) at 1 000 min-1 (rpm) Track shoes ................. 40
Piston displacement ...... 3.053 L
Bore and stroke ............. 94 mm x 110 mm Travel Device
Batteries ........................ 2 × 12 V / 52 Ah Each track driven by 2-speed axial piston motor.
Parking brake is spring-set/hydraulic-released disc type.
Automatic transmission system: High-Low.
HYDRAULIC SYSTEM Travel speeds .............. High : 0 to 5.0 km/h
Low : 0 to 3.1 km/h
Hydraulic Pumps
Main pumps ................. 3 variable displacement axial piston pumps
pumps Maximum traction force . 71 kN
Maximum oil flow ........ 2 x 72 L/min
1 x 56 L/min
Gradeability ................. 70% (35 degree) continuous
Pilot pump .................... 1 gear pump
Maximum oil flow ........ 20.0 L/min
SOUND LEVEL

Hydraulic Motors Sound level in cab according to ISO 6396 .......................... LpA 72 dB(A)
Travel ........................... 2 variable displacement axial piston motors External sound level according to ISO 6395 and
Swing ........................... 1 axial piston motor EU Directive 2000/14/EC ................................................... LwA 97 dB(A)

SERVICE REFILL CAPACITIES

Relief Valve Settings
Fuel tank .....................................................................................135.0 L
Implement circuit .......... 26.0 MPa (265 kgf/cm²)
Engine coolant .................................................................................7.0 L
Swing circuit ................. 26.5 MPa (270 kgf/cm²) Engine oil ...................................................................................... 12.3 L
Travel circuit ................. 31.4 MPa (320 kgf/cm²) Travel device (each side) ................................................................. 1.2 L
Pilot circuit ................... 3.9 MPa (40 kgf/cm²) Hydraulic system ........................................................................ 100.0 L
Hydraulic oil tank .......................................................................... 56.0 L
Hydraulic Cylinders
WEIGHTS AND GROUND PRESSURE
Quantity Bore Rod diameter Stroke

Boom 1 115 mm 65 mm 885 mm Operating Weight and Ground Pressure

Shoe type Shoe width kg kPa (kgf/cm²)
Arm 1 95 mm 60 mm 900 mm
450 mm 9 170 44 (0.45)
Bucket 1 85 mm 55 mm 730 mm Grouser shoe
600 mm 9 340 33 (0.34)
Blade 1 120 mm 70 mm 145 mm Rubber shoe 450 mm 9 190 44 (0.45)
Off-set 1 105 mm 60 mm 386 mm Pad crawler shoe 450 mm 9 220 44 (0.45)
Including 0.28 m (ISO heaped) bucket weight (211 kg).
³

UPPERSTRUCTURE
Revolving Frame
D-section frame for resistance to deformation.

Swing Device
Axial piston motor with planetary reduction gear is bathed in oil. Swing
circle is single-row. Swing parking brake is spring-set/hydraulic-released
disc type.
Swing speed ............... 10.5 min-1 (rpm)
Swing torque ............... 16.6 kNm

Operator's Cab
Independent spacious cab, 1 005 mm wide by 1 675 mm high,
conforming to ISO* Standards. Reinforced glass windows on 4 sides
for visibility. Front windows (upper and lower) can be opened. Reclining
seat.
* International Organization for Standardization

2
 SPECIFICATIONS

DIMENSIONS

K L
E D/D'

M F
O

N QC
G
A
I H B
J P

Unit: mm
ZAXIS 85US TYPE HE10
A Distance between tumblers 2 290
B Undercarriage length 2 920
* C Counterweight clearance 730
D Rear-end swing radius 1 370
D’ Rear-end length 1 370
E Overall width of upperstructure 2 260
F Overall height of cab 2 690
* G Min. ground clearance 360
H Track gauge 1 870
I Track shoe width 450
J Undercarriage width 2 320
K Overall width 2 320
L Overall length 8 100
* M Overall height of boom 2 590
N Track height 650
O Engine cover-height 1 850
P Horizontal distance to blade 1 890
Q Blade height 480

* Excluding track shoe lug.

3
 WORKING RANGES

meter

11

10

9
E
8

5
C
4
D
3

1
F
0
Ground Line
1
A'
2
A
3
B
4

8
meter
13 12 11 10 9 8 7 6 5 4 3 2 1 0

Unit: mm
ZAXIS 85US TYPE HE10

A Max. digging reach 10 280

A’ Max. digging reach (on ground) 10 170

B Max. digging depth 7 650

C Max. cutting height 10 370

D Max. dumping height 8 280

E Min. swing radius 2 070

F Min. dumping height 1 680

G Bucket digging force ISO 53.0 kN

H Bucket digging force SAE:PCSA 47.0 kN

I Arm crowd force ISO 19.0 kN

J Arm crowd force SAE:PCSA 18.0 kN

Excluding track shoe lug.

4
 LIFTING CAPACITIES
Notes: 1. Without bucket.
2. Lifting capacity of the ZAXIS series does not exceed 75% of tipping load with A: Load radius
the machine on firm, level ground or 87% full hydraulic capacity. B: Load point height
3. The load point is the center-line of the bucket pivot mounting pin on the arm. C: Lifting capacity
4. * Indicates load limited by hydraulic capacity.
5. 0 m = Ground.

ZX85US-5A SUPER LONG FRONT, Blade (Up) Rating over-front Rating over-side or 360 degrees Unit: kg

Load Load radius

point 1.0 m 2.0 m 3.0 m 4.0 m 5.0 m
Conditions
height
m

Boom 5.48 m 8.0

Arm 4.04 m 7.0
Counterweight 6.0
1 820 kg
5.0
Rubber crawler
shoe 450 mm 4.0 *1 060 *1 060
3.0 *1 790 *1 790 *1 420 *1 420 *1 200 *1 200
2.0 *2 330 *2 330 *1 700 *1 700 *1 360 *1 360
1.0 *2 760 2 730 *1 930 1 810 *1 500 1 320
0 *880 *880 *2 030 *2 030 2 000 1 670 1 450 1 220
-1.0 *865 *865 *1 180 *1 180 *2 050 *2 050 1 900 1 570 1 380 1 150
-2.0 *1 220 *1 220 *1 550 *1 550 *2 340 *2 340 1 850 1 530 1 335 1 110
-3.0 *1 590 *1 590 *1 970 *1 970 *2 580 2 370 1 840 1 520 1 320 1 100
-4.0 *2 010 *2 010 *2 460 *2 460 *2 250 *2 250 *1 750 1 540 1 330 1 110
-5.0 *2 480 *2 480 *2 350 *2 350 *1 800 *1 800 *1 430 *1 430 *1 140 *1 140
-6.0 *1 390 *1 390 *1 160 *1 160 *940 *940 *700 *700

Load Load radius

At max. reach
point 6.0 m 7.0 m 8.0 m 9.0 m
Conditions
height
m meter
Boom 5.48 m 8.0 *745 *745 *550 *550 6.40
Arm 4.04 m 7.0 *855 *855 *680 *680 *505 *505 7.31
Counterweight 6.0 *860 *860 *835 *835 *480 *480 7.99
1 820 kg
5.0 *895 *895 *850 *850 *770 720 *470 *470 8.49
Rubber crawler
shoe 450 mm 4.0 *960 *960 *890 *890 820 705 *475 *475 8.85
3.0 *1 050 *1 050 *940 875 795 680 *560 530 *485 *485 9.09
2.0 *1 150 1 070 965 830 765 650 610 510 *500 490 9.21
1.0 1 170 1 000 920 780 730 620 590 495 *530 475 9.21
0 1 110 935 875 740 705 590 580 480 565 470 9.11
-1.0 1 060 890 840 705 685 570 580 480 8.89
-2.0 1 030 860 820 685 670 560 610 510 8.54
-3.0 1 010 845 815 680 675 565 670 560 8.06
-4.0 1 020 855 825 690 770 645 7.40
-5.0 *880 *880 *730 *730 6.53
-6.0 *610 *610 5.32

5
 LIFTING CAPACITIES
Notes: 1. Without bucket.
2. Lifting capacity of the ZAXIS series does not exceed 75% of tipping load with A: Load radius
the machine on firm, level ground or 87% full hydraulic capacity. B: Load point height
3. The load point is the center-line of the bucket pivot mounting pin on the arm. C: Lifting capacity
4. * Indicates load limited by hydraulic capacity.
5. 0 m = Ground.

ZX85US-5A SUPER LONG FRONT, Blade (Down) Rating over-front Rating over-side or 360 degrees Unit: kg

Load Load radius

point 1.0 m 2.0 m 3.0 m 4.0 m 5.0 m
Conditions
height
m

Boom 5.48 m 8.0

Arm 4.04 m 7.0
Counterweight 6.0
1 820 kg
5.0
Rubber crawler
shoe 450 mm 4.0 *1 060 *1 060
3.0 *1 790 *1 790 *1 420 *1 420 *1 200 *1 200
2.0 *2 330 *2 330 *1 700 *1 700 *1 360 *1 360
1.0 *2 760 2 730 *1 930 1 810 *1 500 1 320
0 *880 *880 *2 030 *2 030 *2 090 1 670 *1 600 1 220
-1.0 *865 *865 *1 180 *1 180 *2 050 *2 050 *2 130 1 570 *1 650 1 150
-2.0 *1 220 *1 220 *1 550 *1 550 *2 340 *2 340 *2 090 1 530 *1 630 1 110
-3.0 *1 590 *1 590 *1 970 *1 970 *2 580 2 370 *1 970 1 520 *1 550 1 100
-4.0 *2 010 *2 010 *2 460 *2 460 *2 250 *2 250 *1 750 1 540 *1 400 1 110
-5.0 *2 480 *2 480 *2 350 *2 350 *1 800 *1 800 *1 430 *1 430 *1 140 *1 140
-6.0 *1 390 *1 390 *1 160 *1 160 *940 *940 *770 *700

Load Load radius

At max. reach
point 6.0 m 7.0 m 8.0 m 9.0 m
Conditions
height
m meter
Boom 5.48 m 8.0 *745 *745 *550 *550 6.40
Arm 4.04 m 7.0 *855 *855 *680 *680 *505 *505 7.31
Counterweight 6.0 *860 *860 *835 *835 *480 *480 7.99
1 820 kg
5.0 *895 *895 *850 *850 *770 720 *470 *470 8.49
Rubber crawler
shoe 450 mm 4.0 *960 *960 *890 *890 *835 705 *475 *475 8.85
3.0 *1 050 *1 050 *940 875 *860 680 *560 530 *485 *485 9.09
2.0 *1 150 1 070 *1 000 830 *895 650 *695 510 *500 490 9.21
1.0 *1 230 1 000 *1 055 780 *925 620 *750 495 *530 475 9.21
0 *1 300 935 *1 100 740 *945 590 *700 480 *575 470 9.11
-1.0 *1 330 890 *1 110 705 *940 570 *630 480 8.89
-2.0 *1 320 860 *1 090 685 *905 560 *720 510 8.54
-3.0 *1 260 845 *1 030 680 *810 565 *800 560 8.06
-4.0 *1 120 855 *880 690 *780 645 7.40
-5.0 *880 *880 *730 *730 6.53
-6.0 *610 *610 5.32

6
 EQUIPMENT
.......... Standard equipment .......... Optional equipment

ENGINE CAB UPPER STRUCTURE UNDERCARRIAGE

Air cleaner double filters Air suspension seat with heater Auxiliary overload relief valve Blade
Auto idle system AM/FM radio Electrical fuel feed pump with auto Reinforced track links with pin seals
Cartridge-type engine oil filter Anti-slip plate stop Travel motor covers
Cartridge-type fuel filter Armrests Fuel level float 4 tie down hooks
Dry-type air filter with evacuator valve Ashtray Pilot accumulator 450 mm grouser shoe
(with air filter restriction indicator) Auto control air conditioner Rear view camera 450 mm pad crawler shoe
Electric fuel refilling pump Auxiliary function lever (AFL) Rear view mirror (right, left side & 450 mm rubber shoe
Fan guard cab rear)
AUX. terminal and storage 600 mm grouser shoe
Fuel main filter Stack muffler
Defroster
PWR/ECO mode control Tool box
Drink holder
Radiator reserve tank Undercover FRONT ATTACHMENTS
Electric horn
Radiator, oil cooler with dust-proof Assist piping
Floor mat
indoor net Dirt seal on all bucket pins
Glove compartment
Water-separator for engine fuel Flanged pin
Rain guard
60 A alternator HN bushing
Reclining seat
Reinforced resin thrust plate
Retractable seat belt
WC (tungsten-carbide) thermal
HYDRAULIC SYSTEM ROPS/OPG cab
spraying
Boom anti-drift valve Storage box
Casted bucket link A
Extra port for control valve Sun visor
Full-flow filter Transparent roof
Hose rupture valve Window washer MISCELLANEOUS
Hydraulic pilot type control levers Wiper Global e-Service
Pilot control shut-off lever with neutral 4 fluid-filled elastic mounts Theft deterrent system*
engine start system 12 V power source
Pilot filter
Suction filter
Swing drain filter LIGHTS
Swing parking brake Additional boom lights with cover

Travel parking brake Additional cab roof front lights

Two-speed travel system Additional cab roof rear lights

Valve for extra piping Rotating lamp

2 working lights

Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details.
* Hitachi Construction Machinery cannot be held liable for theft, any system will just minimize the risk of theft.

7
 Built on the foundation of superb technological capabilities,
Hitachi Construction Machinery is committed to providing leading-
edge solutions and services to contribute as a reliable partner to
the business of customers worldwide.

Hitachi Environmental Vision 2025

The Hitachi Group released the Environmental Vision 2025 to curb annual Reducing Environmental Impact by New ZAXIS
carbon dioxide emissions. The Group is committed to global production Hitachi makes a green way to cut carbon emissions for global warming
while reducing environmental impact in life cycles of all products, and prevention according to LCA*. New ZAXIS utilizes lots of technological
realizing a sustainable society by tackling three goals — prevention of global advances, including the new ECO mode, and Isochronous Control. Hitachi
warming, recycling of resources, and enhancement of ecosystem. has long been committed to recycling of components, such as aluminum
parts in radiators and oil cooler. Resin parts are marked for recycling.
*Life Cycle Assessment – ISO 14040

Prior to operating this machine, including communication system, in a Illustrations and photos show the standard models, and may or may not include optional
country other than a country of its intended use, it may be necessary to make equipment, accessories, customer installed and modified parts, optional parts and all standard
modifications to it so that it complies with the local regulatory standards equipment with some differences in color and features. Before use, read and understand the
(including safety standards) and legal requirements of that particular country. Operator’s Manual for proper operation.
Please do not export or operate this machine outside the country of its
intended use until such compliance has been confirmed. Please contact your
Hitachi dealer in case of questions about compliance.
These specifications are subject to change without notice.

Hitachi Construction Machinery

KA-EN216EU
www.hcme.com
Printed in Europe