Sewer and Septic Construction

Registration form
Sewer and Septic Construction CEU Training Course $200.00

48 HOUR RUSH ORDER PROCESSING FEE ADDITIONAL $50.00
Start and finish dates: _____________________________________

You will have 90 days from this date in order to complete this course
List number of hours worked on assignment must match State requirement. ________
Name________________________________Signature_______________________________
I have read and understood the disclaimer notice on page 2. Digitally sign XXX
Address: ______________________________________________________________
City_________________________________State_________________Zip________________
Email____________________________________ Fax (____)_______________________
Phone:
Home (____)_______________________ Work (____)___________________________
Operator ID #____________________________________Exp. Date______________
Please circle/check which certification you are applying the course CEU’s/PDH’s.
Wastewater Collection____ O and M____________ Onsite Installer ____
Oregon CCC ($50 additional fee) __________ Other ____________________

Your certificate will be e-mailed to you in about two weeks.
Technical Learning College PO Box 3060, Chino Valley, AZ 86323

Toll Free (866) 557-1746 Fax (928) 272-0747 info@tlch2o.com
If you’ve paid on the Internet, please write your Customer#______________
Please invoice me, my PO#_________________________________________
Please pay with your credit card on our website under Bookstore or Buy Now.
Or call us and provide your credit card information
We will stop mailing the certificate of completion so we need your e-mail address. We
will e-mail the certificate to you, if no e-mail address; we will mail it to you.
DISCLAIMER NOTICE
I understand that it is my responsibility to ensure that this CEU course is either
approved or accepted in my State for CEU credit. I understand State laws and rules
change on a frequent basis and I believe this course is currently accepted in my State
for CEU or contact hour credit, if it is not, I will not hold Technical Learning College
responsible. I also understand that this type of study program deals with dangerous
conditions and that I will not hold Technical Learning College, Technical Learning
Consultants, Inc. (TLC) liable for any errors or omissions or advice contained in this
CEU education training course or for any violation or injury caused by this CEU
education training course material. I will call or contact TLC if I need help or
assistance and double-check to ensure my registration page and assignment has
been received and graded.
Professional Engineers; Most states will accept our courses for credit but we do not
officially list the States or Agencies. Please check your State for approval.
You can obtain a printed version of the course manual from TLC for an additional
$69.95 plus shipping charges.
AFFIDAVIT OF EXAM COMPLETION

I affirm that I personally completed the entire text of the course. I also affirm that I
completed the exam without assistance from any outside source. I understand that it
is my responsibility to file or maintain my certificate of completion as required by the
state or by the designation organization.
Grading Information
In order to maintain the integrity of our courses we do not distribute test scores,
percentages or questions missed. Our exams are based upon pass/fail criteria with the
benchmark for successful completion set at 70%. Once you pass the exam, your
record will reflect a successful completion and a certificate will be issued to you.
Rush Grading Service

If you need this assignment graded and the results mailed to you within a 48-hour
period, prepare to pay an additional rush service handling fee of $50.00. This fee may
not cover postage costs. If you need this service, simply write RUSH on the top of
your Registration Form. We will place you in the front of the grading and processing
line.
Do not solely depend on TLC’s Approval list for it may be outdated.
A second certificate of completion for a second State Agency $50 processing

fee.
All downloads are electronically tracked and monitored for security purposes.
2
Sewer and Septic Construction Assignment 4/1/2018 TLC
Sewer and Septic Construction Answer Key
Name___________________________________
Phone# __________________________________
You are solely responsible to ensure that this course is accepted for credit by
your State. Did you check with your State agency to ensure this course is
accepted for credit?
Method of Course acceptance confirmation. Please fill this section
Website __ Telephone Call___ Email____ Spoke to___________________
Do not solely depend on TLC’s Approval list for it may be outdated.
What is the course approval number, if necessary? ____________________
You are responsible to ensure that TLC receives the Assignment and Registration Key.
Please call us to ensure that we received it. No refunds.
Please circle, underline, bold or X only one correct answer
1. A B C D E F 16. A B C D E F 31. A B C D E F
3
4
5
6
352. A B C D E F 386. A B C D E F
353. A B C D E F 387. A B C D E F
354. A B C D E F 388. A B C D E F
355. A B C D E F 389. A B C D E F
356. A B C D E F 390. A B C D E F
357. A B C D E F 391. A B C D E F
358. A B C D E F 392. A B C D E F
359. A B C D E F 393. A B C D E F
360. A B C D E F 394. A B C D E F
361. A B C D E F 395. A B C D E F
362. A B C D E F 396. A B C D E F
363. A B C D E F 397. A B C D E F
364. A B C D E F 398. A B C D E F
365. A B C D E F 399. A B C D E F
366. A B C D E F 400. A B C D E F
367. A B C D E F
368. A B C D E F
369. A B C D E F
370. A B C D E F
371. A B C D E F
372. A B C D E F
373. A B C D E F
374. A B C D E F
375. A B C D E F
376. A B C D E F
377. A B C D E F
378. A B C D E F
379. A B C D E F
380. A B C D E F
381. A B C D E F
382. A B C D E F
383. A B C D E F
384. A B C D E F
385. A B C D E F
7
You are responsible to ensure that TLC receives the Assignment and Registration
Key. Please call us to ensure that we received it.
Additional certificate for another Agency – additional fee $50
Please fax the answer key to TLC

(928) 272-0747
Rush Grading Service

If you need this assignment graded and the results mailed to you within a 48-hour
period, prepare to pay an additional rush service handling fee of $50.00. This fee may
not cover postage costs. If you need this service, simply write RUSH on the top of your
Registration Form. We will place you in the front of the grading and processing line.
Thank you…
8
SEWER AND SEPTIC CONSTRUCTION
CEU TRAINING COURSE
CUSTOMER SERVICE RESPONSE CARD
NAME: __________________________
E-MAIL _________________________________ PHONE _____________________
PLEASE COMPLETE THIS FORM BY CIRCLING THE NUMBER OF THE

APPROPRIATE ANSWER IN THE AREA BELOW.
1. Please rate the difficulty of your course.

Very Easy 0 1 2 3 4 5 Very Difficult
2. Please rate the difficulty of the testing process.

Very Easy 0 1 2 3 4 5 Very Difficult
3. Please rate the subject matter on the exam to your actual field or work.
Very Similar 0 1 2 3 4 5 Very Different
4. How did you hear about this Course? ____________________________________
5. What would you do to improve the Course?
_____________________________________________________________________
How about the price of the course?
Poor_____ Fair ____ Average ____ Good____ Great_____
How was your customer service?
Poor___ Fair ____ Average ____ Good _____ Great_____
Any other concerns or comments.
9
10
Sewer and Septic Construction CEU Training Course Assignment
The Assignment (Exam) is also available in Word on the Internet for your Convenience,
please visit www.ABCTLC.com and download the assignment and e- mail it back to TLC.
You’ll have 90 days from the start of this course to complete in order to receive your
Professional Development Hours (PDHs) or Continuing Education Unit (CEU). A score of 70 %
is necessary to pass this course. We prefer if this exam is proctored. No intentional trick
questions. If you should need any assistance, please email all concerns and the completed
manual to info@tlch2o.com.
We would prefer that you utilize the enclosed answer sheet in the front, but if you are unable to
do so, type out your own answer key. Please include your name and address on your manual
and make copy for yourself. You can e-mail or fax your Answer Key along with the Registration
Form to TLC. (S) Means answer may be plural or singular. Multiple Choice Section, One
answer per question and please use the answer key.
Onsite Sewage Facilities (OSSF)

1. Which of the following terms - are wastewater systems designed to treat and dispose of
effluent on the same property that produces the wastewater?
A. Effective management D. Onsite sewage facilities (OSSF)
B. Clustered wastewater system E. Decentralized treatment system(s)
C. Onsite wastewater management F. None of the Above
2. Onsite/decentralized wastewater treatment systems, commonly called _______________,

treat sewage from homes and businesses that are not connected to a centralized wastewater
treatment plant.
A. Septic system(s) D. Onsite wastewater management program(s)
B. Advanced wastewater treatment E. A septic tank and drainfield combination
C. Centralized sewer system(s) F. None of the Above
3. Decentralized treatment systems include individual onsite septic systems, cluster systems,
and _____________like constructed wetlands, and recirculating sand filters.
A. Effective management D. Alternative wastewater treatment technologies
4. Which of the following terms account for approximately 25% of all domestic wastewater
treatment in the United States?
A. Septic system(s) D. OSSFs
5. Recognition of the impacts of _____________on ground water and surface water quality
(e.g., nitrate and bacteria contamination, nutrient inputs to surface waters) has increased
interest in optimizing the systems' performance.
A. Effective management D. Ground water and surface water quality
C. Onsite systems F. None of the Above
11
6. Although some __________________ have functioned successfully in the past, problems
persist. Most current onsite regulatory programs focus on permitting and installation.
7. Which of the following terms - requires rigorous planning, design, installation, operation,
maintenance, monitoring, and controls?
A. Effective management D. Effective management of onsite systems
What is EPA doing to help manage onsite systems?

8. EPA develops voluntary policies and guidance for?
9. EPA sponsors state-of-the-art research on ____________technologies through

demonstration projects.
A. Effective management D. Onsite and clustered wastewater system
10. EPA works with state and local officials, industry professionals, and partner organizations to
support?
A. Conventional system(s) D. Volumes of treated wastewater
B. Onsite wastewater management E. Primary and secondary treatment
C. The quantity of contaminants F. None of the Above
11. EPA promotes homeowner awareness to strengthen?

A. Effective management D. Ground water and surface water quality
12. Which of the following terms - treatment increases the percentage of contaminants,
particularly nitrogen and fecal coliform, removed in wastewater?
A. Storm sewer(s) D. Water quality of receiving waters
B. Sanitary sewer(s) E. Wastewater management system(s)
C. Advanced wastewater F. None of the Above
13. Advanced pretreatment components typically follow _____________ from septic tanks and
decrease the constituents of concern before they reach the final treatment and dispersal
component.
(s) means the answer may be plural or singular in nature.
12
14. Which of the following terms - components are used when a site has a high risk to public or
environmental health and primary treatment is not protective enough?
C. Advanced pretreatment F. None of the Above
Types of Sewer Systems

15. Centralized sewer systems are generally broken out into three different categories: sanitary
sewers, storm sewers, and?
B. Advanced wastewater treatment E. Combined sewers
16. Which of the following terms - carry wastewater or sewage from homes and businesses to
treatment plants?
C. System F. None of the Above
17. Which of the following terms - are designed to quickly get rainwater off the streets during
rain events?
B. Storm sewers E. Primary and secondary treatment
18. Which of the following terms - do not connect with a treatment plant, but instead drain
directly into nearby rivers, lakes, or oceans?
A. Most storm sewers D. Water quality of receiving waters
C. System F. None of the Above
19. Which of the following terms - carry both wastewater and storm water in the same pipe?
B. Advanced wastewater treatment E. Combined sewers
20. Leaking, overflowing, and insufficient ______________can release untreated wastewater

into receiving waters.
C. Wastewater collection systems F. None of the Above
21. Outdated pump stations, undersized to carry ____________ from newly developed
subdivisions or commercial areas, can also create a potential overflow hazard, adversely
affecting human health and degrading the water quality of receiving waters.
A. Sewage D. Collection system
B. Wastewater E. Centralized wastewater
C. Septic system F. None of the Above
13
22. The maintenance of the ____________is therefore a continuous, never-ending cycle.
C. Sewer system F. None of the Above
23. Technology has improved collection system maintenance with such tools as television
camera assisted line inspection equipment, jet-cleaning trucks, and improvements in pump
design. Because of the increasing complexity of________, collection system maintenance is
evolving into a highly skilled trade.
C. Wastewater collection systems F. None of the Above
24. Collection system operators are charged with protecting public health and the environment,
and therefore must have documented proof of their certifications in the respective?
A. Sewage D. Wastewater management systems
B. Wastewater E. Centralized wastewater treatment
Onsite Treatment Processes

25. Onsite sewage treatment systems provide septic system owners with best management
practices to keep their ____________functioning properly.
B. The tank effluent E. Primary and secondary treatment
C. Septic systems F. None of the Above
26. These practices are really about recycling water: cleaning ___________and returning safe
water to the water cycle. If a septic system is not functioning properly, clean water is not
returned to our groundwater systems.
27. Our goal is to ensure that you can treat __________while protecting human and
environmental health in a cost-effective manner.
A. Your wastewater D. Biological and chemical processes
B. Onsite sewage E. Wastewater collection and treatment
C. Enhanced organic matter removal F. None of the Above
28. The high cost of centralized wastewater treatment plants and the advances made in
individual and cluster (decentralized) system technologies have expanded the array of available
treatment options and supported development of a more tailored approach to
_______________ management services.
14
29. Which of the following terms - can be closely matched to the types and quantities of
sewage generated through a “just in time” modular approach financed via a “user pays” cost
structure?
A. Wastewater collection and treatment D. Biological and chemical processes
B. Onsite sewage treatment E. Wastewater collection and treatment
Key Considerations
30. Wastewater flow and strength, site and local infrastructure conditions, and performance
requirements for the _______________are all key considerations in deciding what type of
wastewater collection and treatment system is needed and how it should be designed.
B. Dispersed or discharged effluent E. Centralized wastewater treatment
31. Onsite systems treat wastewater and disperse it on the property where it is generated.
When functioning properly, onsite systems prevent human contact with_________, and prevent
contamination of surface and groundwater. Factors that affect the proper functioning of onsite
systems include the site and soil conditions, design, installation, operation and maintenance.
A. Wastewater D. Biological and chemical processes
C. Sewage F. None of the Above
Basic Onsite Treatment Processes

32. Which of the following terms - are designed to accomplish the same thing—the treatment of
wastewater—but how this is accomplished is based on the type of treatment technology used?
A. Individual and clustered wastewater systems D. Collection system(s)
B. Wastewater system(s) E. Centralized wastewater system(s)
C. Septic system(s) F. None of the Above
Primary Treatment
33. Physical treatment processes also includes trapping of solids via ___________or screens
prior to discharge of the tank effluent.
A. Conventional system(s) D. Septic tank effluent filters
Secondary Treatment
34. Which of the following terms - designed to remove organic matter, mostly through digestion
and decomposition, often aided by introduction of or exposure to atmospheric oxygen?
35. A typical standard for ________________ is biochemical oxygen demand (BOD) and total
suspended solids (TSS) concentrations less than or equal to 20 mg/L each on a 30-day average
basis.
15
Tertiary (Advanced) Treatment
36. Which of the following terms - includes enhanced organic matter removal, pathogen
reduction, and nutrient removal?
A. Advanced treatment of wastewater D. Biological and chemical processes
37. Which of the following terms - parameters can include nitrate-nitrogen, phosphorus, and
bacteria?
B. The tank effluent E. Typical effluent quality
38. Which of the following terms - can occur via process controls (e.g., alternating oxic/anoxic
conditions) or through exposure to additives or media designed to cause chemical or other
reactions (e.g., disinfection, phosphorus precipitation).
A. Advanced treatment D. Biological and chemical processes
Conventional Systems
39. Which of the following terms - are the most commonly used wastewater treatment
technologies, combining primary and secondary treatment?
B. The tank effluent E. Conventional treatment systems
40. Which of the following terms - consists of a septic tank and a soil absorption field that
allows primary treatment effluent to infiltrate into unsaturated soil?
A. A conventional wastewater treatment system D. Volumes of treated wastewater
41. Which of the following terms - can serve individual homes or businesses, or clusters of
buildings?
42. The conventional system has two principal parts—the tank and soil absorption field. The
septic tank treats _______________by allowing floatable materials (e.g., fats, oils, grease) to
rise to the surface, forming a scum layer, and the heavier solids to sink to the bottom, creating a
layer of sludge.
A. Pretreatment components D. Septic tanks, trash tanks, and processing tanks
B. Gravity flow systems E. Wastewater
C. Septic tank effluent F. None of the Above
16
43. Which of the following terms - is similar to that of primary sedimentation in larger treatment
facilities, except that it is generally devoid of oxygen?
44. Which of the following terms - facilitates aerobic treatment and filtration of the remaining
contaminants?
B. The soil absorption system E. Advanced system
C. Septic tank effluent system F. None of the Above
45. Subsurface discharge of effluent to the soil can be configured to optimize treatment via
pressurized time-dosing of preset volumes of treated wastewater, which facilitates oxygenation
of the soil matrix between doses, promotes film flow of wastewater over soil particles, and
ensures a uniform and consistent application of?
A. Effluent to the entire drainfield D. Volumes of treated wastewater
Pretreatment Components
46. Which of the following terms - remove many of the contaminants from the wastewater to
prepare the effluent for final treatment and dispersal into the environment?
B. Gravity flow systems E. Advanced systems
47. Which of the following terms - is reduced to a level the soil can accept and treat. Many
options exist for treatment prior to release into the receiving environment?
A. Advanced system(s) D. The quantity of contaminants
B. Septic tank effluent E. Final treatment and dispersal components
C. The dose/rest cycle F. None of the Above
48. Which of the following terms - include septic tanks, trash tanks, and processing tanks, while
aerobic treatment units, media filters, and constructed wetlands are considered advanced
pretreatment components?
A. Wastewater pretreatment components D. Septic tanks, trash tanks, and processing tanks
49. Which of the following terms - provide the final removal of contaminants and distribute the
effluent for dispersal back into the environment?
A. Advanced system(s) D. Pressurized distribution methods
50. Which of the following terms - are the most widely used dispersal systems?
17
51. Which of the following terms - overcome a variety of site limitations. Low pressure,
subsurface drip, and spray distribution systems are designed to function in difficult areas.
These systems are pressurized, which assists in providing even distribution of wastewater.
Advanced Systems
52. Treatment system components designed to pretreat septic tank effluent before discharge to
the soil dispersal field are often called?
53. Advanced systems can be designed and built on-site or can consist of prefabricated units
designed to overcome some site and soil limitations including:
When the aerated (unsaturated) soil depth below the infiltrative surface in the drainfield is less
than the minimum required, _______________or components (e.g., fixed film treatment units)
can be added to increase pollutant removal prior to soil discharge.
A. Advanced system(s) D. Advanced treatment processes
54. In environmentally sensitive areas, _____________ can be used to meet effluent standards
for oxygen-demanding wastes, bacteria, nitrogen, and phosphorus.
55. Which of the following terms - malfunctions hydraulically due to a buildup of the biomat at
the infiltrative surface, it may be restored, and treatment may be enhanced, by improving soil
oxidation through timed dosing of septic tank effluent to the dispersal field.
56. Which of the following terms - allows the soil to drain between doses, improving soil
oxygen transfer?
57. Wastewater with high organic strength can employ __________to improve aeration,
biological decomposition, and treatment of organic wastes.
B. Gravity flow systems E. Advanced treatment units/processes
18
58. Which of the following terms - that provide timed dosing of septic tank or treatment unit
effluent to the soil can sometimes be used where soil infiltration areas are limited, except in
cases of high-clay content soils.
59. Which of the following terms - that employ pressure drip dispersal of the effluent can reduce
bacteria and nutrient loading to groundwater by applying wastewater high in the soil profile,
improving bacteria predation and uptake of nutrients by plants and providing a carbon source for
denitrification.
60. Which of the following terms - require management, but advanced systems, due to their use
of pumps, switches, and other electromechanical components, especially need regular
operation and maintenance attention?
Elevated (Mound or At-Grade) Systems

61. This system type includes _____________to provide primary (and sometimes secondary)
treatment prior to discharging the effluent to a modified drainfield.
A. Pressure distribution D. A septic tank or prefabricated treatment unit
B. Septic tank effluent E. Infiltration area protection
62. Effluent flows from the tank or treatment unit to a pump tank and periodically dosed to
the_____________, which is typically constructed of a layer of clean, uniformly graded sand on
a plowed or roughened natural soil surface.
A. At-grade systems D. Modified dispersal area
B. Septic tank effluent E. Aerobic treatment units (ATUs)
C. Soil dispersal field F. None of the Above
63. The tank effluent is uniformly dosed onto the _____________within the mound, which may
be 1-4 ft. above the natural grade. Sand within the mound compensates for shallow unsaturated
soil conditions below the natural grade.
A. Media D. Vegetative submerged bed(s)
B. Media filter(s) E. Infiltrative surface
C. ATU(s) F. None of the Above
Mound Systems
64. Which of the following terms - are appropriate for areas with a high water table or shallow,
fractured bedrock?
A. At-grade systems D. Effluent flows from the tank
19
65. Which of the following terms - should have cleanouts so they can be flushed at least twice a
year?
B. Media filter(s) E. Distribution lines
Aerobic Treatment Units

66. Which of the following terms - consist of prefabricated units featuring consecutive or
compartmentalized tanks, pumps, blowers, and internal piping, and are designed to treat
wastewater via suspended or attached growth decomposition in an oxygen rich environment.
67. Three processes are involved in most____________: physical separation (mostly settling),
aerobic treatment (aeration and mixing), and clarification (final settling).
B. Media filter(s) E. Aerobic systems
68. Which of the following terms - vary in design and can consist of simple activated sludge
variations, sequencing batch reactors, trickling filters, and combinations of two or more of these
unit processes?
Media Filters
69. Which of the following terms - can be applied to a layer of sand or gravel, a tank containing
peat or plastic media, or compartments of hanging textile or other material to improve oxygen
access and enhance biochemical treatment processes?
A. Septic tank effluent D. Individual and clustered systems
B. Wastewater E. Infiltration area protection
70. A number of these so-called “______________” are available to treat wastewater. Sand is
the most commonly used media, but clean gravel, crushed glass, textile strips, peat, and tire
crumbs are also used, depending on site restrictions and state/local regulations.
71. In single-pass or intermittent filter design, _______________is pump-dosed uniformly onto

the media at regular intervals 12 to 48 times per day.
20
72. As the effluent trickles through the _____________, suspended and some colloidal
particles are filtered, and bacteria growing on the media aerobically treat organic wastewater.
73. Effluent that percolates through the media bed is discharged to the?
Submerged-Flow Wetland or Vegetative Submerged-Bed (VSB)

74. Which of the following terms - are also called submerged-flow wetlands. This system type
treats septic tank effluent by horizontal flow through a lined bed of unmulched gravel planted
with wetland species?
75. Which of the following terms - are extremely passive and require little management in
producing a good quality effluent?
A. Septic system(s) D. Collection systems for clustered facilities
B. Cluster system(s) E. Wetland system(s)
C. Treatment facilities F. None of the Above
76. Effluent is further treated when discharged to _____________following flow through the
wetland cell(s).
C. Unsaturated soil F. None of the Above
Cluster System Applications

77. he Cluster Wastewater Systems Planning Handbook lists a number of potential wastewater
collection technologies for small and large cluster systems, including: grinder pump systems,
which transport all sewage; effluent sewers, such as the_______________; the septic tank
effluent gravity (STEG) collection system; and vacuum systems.
A. Pressure distribution D. Individual and clustered systems
B. Septic tank effluent pump (STEP) E. Infiltration area protection
78. Which of the following terms - facilities serving clustered buildings may range from a
communal septic tank and soil dispersal system to a more advanced treatment system.
A. Treatment D. Individual and clustered systems
79. Advanced systems may facilitate local reuse of the treated effluent for toilet flushing,
irrigation, industrial purposes, or to replenish?
A. Aerobic microsite(s) D. Microbes and other particles
B. All sewage E. Waterborne illnesses
C. Aquifer(s) F. None of the Above
21
80. Which of the following terms - must be managed by an entity with the technical, financial,
and managerial capacity to effectively and efficiently handle operation, maintenance, customer
billing, repair/replacement, and other tasks?
Septic System Failures

81. Improperly treated water can carry ____________that can cause gastroenteritis, fever,
common cold, respiratory infections and hepatitis.
C. Bacteria and viruses F. None of the Above
82. Septic system maintenance is like automobile maintenance; a little effort on a regular basis
can save you a lot of money and significantly prolong the life of the?
B. Cluster system(s) E. System
83. Failing systems are a major source of groundwater pollution, cause ________________,
such as dysentery and hepatitis, and are expensive for homeowners to replace.
C. Aquifer(s) F. None of the Above
84. Systems can treat individual homes, clusters of buildings, or whole subdivisions and/or
commercial establishments. ___________ for clustered facilities can work by gravity or operate
via vacuum or pressure pump.
A. Septic system(s) D. Collection systems
85. Wastewater is typically treated through primary and secondary processes (and sometimes
tertiary or_____________________) and can be disinfected prior to discharge.
A. Advanced “polishing” procedures D. Individual and clustered systems
Improving OSSF Treatment through Performance Requirements

86. Most onsite wastewater treatment systems are of the conventional type, consisting of a
septic tank and a?
A. Regular maintenance D. Subsurface wastewater infiltration system (SWIS)
B. Drainage features E. Approving the use of various treatment technologies
22
87. Over the past 20 years the onsite wastewater treatment system (OWTS) industry has
developed many ______________that can achieve high performance levels on sites with size,
soil, ground water, and landscape limitations that might preclude installing conventional
systems.
A. Performance requirements D. Primary and secondary processes
B. Water resources E. New treatment technologies
C. Fixed-film reactors F. None of the Above
88. New technologies and ______________are based on defining the performance

requirements of the system, characterizing wastewater flow and pollutant loads, evaluating site
conditions, defining performance and design boundaries, and selecting a system design that
addresses these factors.
A. Alternative treatment technologies D. Performance-based management
B. Existing technologies E. Wastewater characteristics, and site conditions
C. Improvements to existing technologies F. None of the Above
89. Which of the following terms - can be expressed as numeric criteria or narrative criteria and
are based on the assimilative capacity of regional ground water or surface waters, water quality
objectives, and public health goals?
B. Water resources E. Onsite wastewater treatment system (OWTS)
90. Which of the following terms - help define system design and size and can be estimated
by comparing the size and type of facility with measured effluent outputs from similar, existing
facilities?
C. Wastewater flow and pollutant content F. None of the Above
91. Which of the following terms - integrate detailed analyses of regional hydrology, geology,
and water resources with site specific characterization of soils, slopes, structures, property lines,
and other site features to further define system design requirements and determine the physical
placement of system components.
A. Site evaluations D. Individual and clustered systems
92. Which of the following terms - applied today treat wastes after they exit the septic tank; the
tank retains settleable solids, grease, and oils and provides an environment for partial digestion
of settled organic wastes.
A. Regular maintenance D. Most of the alternative treatment technologies
93. Post-tank treatment can include aerobic (with oxygen) or anaerobic (with no or low oxygen)
biological treatment in suspended or fixed-film reactors, physical/chemical treatment, soil
infiltration,_________________.
A. Fixed-media filtration, and/or disinfection D. Primary and secondary processes
B. Water resources E. Onsite wastewater treatment system (OWTS)
23
94. Which of the following terms - based on these technologies are defined by performance
requirements, wastewater characteristics, and site conditions?
A. Alternative treatment technologies D. The application and sizing of treatment units
Performance-Based Standards
95. The move toward site-appropriate, risk-based system design and the growing interest in
______________has increased the need for performance-based design guidance.
B. Clustered facilities E. Onsite wastewater treatment system (OWTS)
96. Which of the following terms - approaches have been proposed as a substitute for
prescriptive requirements for system design, siting, and operation?
System Design Considerations

97. One of the more common reasons why some individual or cluster systems do not perform
properly is inappropriate _____________ selection.
A. Soil condition(s) D. Life of system components
B. System/technology E. System compatibility
C. Subsurface drainfield(s) F. None of the Above
98. A wastewater system should be matched to the volume and_________________, and the
site, soil, and groundwater/surface water conditions must be known in detail in order to develop
an appropriate system design.
A. Alternative treatment technologies D. Pollutant profile of wastewater
99. Which of the following terms - permitting programs are expanding the options available for
providing treatment services, especially for sites with limiting soil conditions?
A. Regular maintenance D. State and local wastewater system
Management Considerations
100. Which of the following terms - systems require management. Management services can
be provided by an outside contractor or responsible management entity.
B. System/technology E. Wastewater treatment
24
101. Factors that influence system management include:
_________________, such as very cold or wet climates.
A. Complexity of service D. Operation in extreme conditions
B. Final design components E. Designs and materials specifications
C. All system components F. None of the Above
102. __________________ and access to repair parts.

B. System/technology E. System compatibility
103. Maintenance needs, including frequency and?

A. Complexity of service D. Very cold or wet climates
Permitting and Approval Process

104. State and local governments vary considerably in their approach to approving
_________________and issuing installation and operation permits.
Consultation with the property owner regarding final design components.
A. Complexity of service D. System types and components
105. It is important that the application include___________, narratives, forms, calculations,

catalog cuts, photos, and other data, including detailed equipment and installation specifications
to make siting the system components easier.
A. System drawings D. System maintenance
B. System location and features E. Wastewater treatment system
C. Installation specifications F. None of the Above
106. If the site has been developed, all structures, utilities, and _______________should be
identified.
A. Regular maintenance D. Ingress and egress pathways
B. Drainage features E. Various treatment technologies
107. The source of potable water and distribution lines should be identified as well. If there is
an existing wastewater treatment system, the condition of all components, including the reserve
area, should be recorded and?
A. Drainage features D. System maintenance
B. System location and features E. Minimum setbacks met
Regular Maintenance
108. Regular maintenance is required for_______________. However, it is especially important
for more complex alternative systems, especially those that use pumps, controls, timers, and
pressure distribution.
A. All systems D. Individual and clustered systems
B. Wastewater systems E. Infiltration area protection
C. Septic systems F. None of the Above
25
109. Verification of _______________ contracts, operator expertise, and reporting
requirements for system maintenance such as tank pumping and repairs should be included in
the approval process.
A. Drainage features D. System maintenance
B. System location and features E. Wastewater treatment system
These records should reflect:

110. The______________. If properly designed, installed, and maintained, a septic system can
effectively treat household wastewater for up to 20 years or more. Look to see if the house has
a system that is near the end of its life-span.
A. Regular maintenance D. Age of the system
B. Drainage features E. Location of the system
C. Size of the system F. None of the Above
111. The _________________. Size is important because graywater (laundry water, sink
water) and blackwater (toilet water) need to be retained in the tank for at least a day or more to
allow solids to separate from the liquids and begin breaking down. If wastewater is pushed
through without proper settling, the solids can clog the drainfield, stressing and possibly
damaging the system.
112. The _________________. Knowing where the tank and drainfield are will help you visually
check the area for obvious signs of failure. In addition, poorly sited drainfields can result in
septic system failures. Location of the system in relation to wells, other septic systems, slope of
the land, natural drainage patterns, underlying soil conditions, and lot boundaries may indicate
potential problems with the septic system and should be reviewed by you or a professional.
Testing and Certification

113. Approving the use of various treatment technologies is under the purview of state and
local governments. Some states individually test and validate __________and maintain a list of
those approved in their state.
A. Regular maintenance D. Adequate tank size
B. Drainage features E. Treatment technologies
Construction Section
114. Appropriate wastewater treatment system construction and/or installation practices are
critical to the performance of individual and?
A. Pressure distribution D. Clustered systems
26
115. Construction activities can affect short-term and long-term system performance by failing
to adhere to ______________, neglecting proper pipe slope requirements, inadvertently
switching tank inlet/outlet orientation, or failing to protect infiltration area soils from equipment
compaction.
A. Infiltration area D. Secondary treatment unit(s)
B. Inlet/outlet orientation E. Uphill dispersal piping
C. Distribution pipe effluent F. None of the Above
116. ___________________, a key component of good system installation practice, should be

carefully considered during site preparation, construction equipment selection and use, and
before and during construction.
117. The development of a final design plan that includes drawings, narratives, forms,
calculations, photos, and other data, including____________, will help ensure a successful
outcome. This information must be assembled into a cohesive document to allow the proper
installation of the design without the need for any assumptions.
A. Infiltration area D. Detailed equipment and installation specifications
Preparation Phase
118. Conduct a pre-construction conference at the site to identify site component locations,
verify setbacks and other site conditions, check surface elevations, and identify potential
problems or safety concerns (_________________________).
119. Assess changes in conditions (__________________) that may have occurred since
design work was completed.
120. If work will be delayed, flag off or otherwise protect the?

A. Infiltration area(s) D. Gravity flow pipe(s)
B. Site component location(s) E. Designed component finished condition(s)
C. Gravity flow system(s) F. None of the Above
Project Execution
121. Verify designed treatment system components and materials, such as tank type, size, and
material; piping; and?
27
122. Excavate areas for conveyance piping, the tank(s), secondary treatment units, and
infiltration or soil dispersal components according to designated depths and required?
A. Infiltration area D. Pipe slopes
123. For_______________, all elevations are tied to the building sewer line elevation. Ensure
that the proper fall is available from the building to the tank, then to the distribution box(es), and
to the infiltration area.
124. Ensure that the tank is on solid tamped ground, installed level and at the proper elevation,
and that __________________ is correct. Secure tank covers after hours to prevent accidents.
Backfill tanks as soon as possible.
125. Follow manufacturer’s recommendations for__________________. Plastic and fiberglass

tanks usually require special installation techniques (e.g., anchoring, backfilling with sand,
tamping backfill in lifts, filling tank with water as its backfilled, etc.)
C. Installing tanks F. None of the Above
126. Ensure that ________________are plumbed, wired, and installed to allow easy
inspection, access, and removal (e.g., use quick-connect union and backflow prevention valve
between pump and uphill dispersal piping).
A. Infiltration area D. Pumps
127. Ensure that trench bottoms for _________________ are tamped and stable and free of
rocks and roots, and that backfilled areas around pipes are tamped to prevent dips.
128. Ensure that ______________effluent dispersal holes go on the bottom.

B. Site component location(s) E. Distribution pipe
129. Extend ___________piping stubs below tank access ports, but do not block ports to
ensure access for pumping and inspection. Use rubber boots or grout to completely seal around
pipes and risers.
B. Inlet and outlet E. Uphill dispersal piping
28
130. Install access _________________to the surface, install outlet filters/screens, and
complete installation of pumps, wiring, control panels, and other components.
A. Port risers D. Gravity flow pipe(s)
131. Install _________________in key locations (near building sewer, D-box, etc.); this aids in
operation/maintenance later on.
A. Infiltration area D. Cleanouts and inspection ports
132. Conduct functional test of the system after installation, checking flows, pump discharge (if
used), operation of ?
Site Preparation and Excavation Practices

133. Overhead power lines, steep slopes, and _______________ at the installation site can all
present serious safety hazards. A brief preconstruction meeting can ensure that safety hazards
and practices to eliminate, minimize, or respond to them are identified.
A. Compaction D. Excavations
B. Moisture E. Infiltration
C. Disturbance F. None of the Above
134. Site preparation requires a number of activities including clearing and surface preparation
for filling. Use of lightweight tracked equipment will minimize soil?
A. Compaction D. Excavation
135. Soil ______________ should be determined to ensure that it is dry, and care should be
taken to avoid soil disturbance as much as possible.
136. To avoid potential soil _______________during construction, the soil below the proposed
infiltration surface elevation must be below its plastic limit during construction (i.e., it must lack
the moisture required to make it moldable into stable shapes). This should be tested before
excavation begins.
B. Moisture E. Damage
137. Site ______________ is conducted only when the infiltration surface can be covered the
same day to avoid loss of soil permeability from wind-blown silt or raindrop impact.
29
138. Another solution is to use light-weight gravel-less systems, which reduce the
________________ process. Site access points and areas for traffic lanes, material stockpiling,
and equipment parking should be designated on the drawings for the contractor.
139. Heavy equipment should be diverted from the absorption field to avoid compaction and
damage to the area. Flagging off the ____________ area as early as possible is critical to
ensure long-term function of the system.
140. Grubbing of the site (mechanically raking away roots) should be avoided. If the site is to
be filled, the surface should be moldboard- or chisel-plowed parallel to the contour (usually to a
depth of seven to ten inches) when the soil is sufficiently dry to ensure maximum vertical?
A. Compaction D. Permeability
141. The organic layer should not be removed. Scarifying the surface with the teeth of a
backhoe bucket is not sufficient. All efforts should be made to avoid any disturbance to the
exposed _______________ surface.
Field Construction Practices

142. Changes in construction practices over the past 25 years have led to improvements in the
performance of _____________. For example, construction materials used in plumbing,
wastewater lines, and lateral fields should meet American Society for Testing and Materials
standards.
A. Individual wastewater system(s) D. Long-term system performance
B. Infiltration area E. Distribution pipe(s)
C. System design F. None of the Above
143. Avoid work during wet conditions. ______________in infiltration trenches should be
scarified and the surface gently raked prior to installing the gravel or gravel-less
piping/chambers.
C. Smeared soil surfaces F. None of the Above
144. If gravel or crushed rock is to be used for the system medium, the rock should be placed
in the trench by using the backhoe bucket to long-term system performance. If soil compaction
occurs during drainfield installation, _______________, but only by removing the compacted
layer.
30
145. The removal of this amount of soil over the entire infiltration surface can be significant. It
will reduce the separation distance to the restrictive horizon and could place the infiltration
surface in an unacceptable soil?
A. Compaction D. Horizon
146. Which of the following terms - should be carefully placed over the rock, leveled, and
bedded in on the sides?
147. After the rock and pipes have been placed in the trench, the ________________should be
placed over the top of the rock to prevent soil from moving into the rock.
A. Filter fabric D. Long-term system performance
148. Flag off the ________________ to keep construction and other traffic away.
149. All ______________programs should carefully consider construction and installation
elements to ensure the proper operation of onsite systems. These programs should include
permits, inspections, and installer training requirements.
B. Infiltration area E. Onsite management
Construction/Installation Programs Basic Approach

150. Construction permit based on code-compliant site evaluations and?
Enhanced Treatment Systems

151. Which of the following terms - have proven to be effective in situations where
conventional systems are not appropriate?
A. Treatment performance D. Wastewater treatment system(s)
B. Cluster system(s) E. Wastewater alternative technologie(s)
C. Several wastewater alternative technologies F. None of the Above
Material Replacement
152. Technologies that replace one component of the conventional system with a component
manufactured from?
A. Clustered system(s) D. Advanced or innovative technologies
B. Conventional system(s) E. Wastewater alternative technologie(s)
C. O&M requirement(s) F. None of the Above
31
Enhanced Wastewater Treatment
153. Advanced or innovative technologies that provide a _____________beyond conventional
systems. Generally, these systems have mechanical or moving parts that require periodic
operation and maintenance, inspections, and eventual replacement.
A. Clustered system(s) D. Higher level of treatment
154. Enhanced wastewater treatment systems are more complex than ____________and
require greater oversight to keep all aspects of the treatment process in balance.
A. Treatment performance D. Conventional systems
Clustered Treatment Systems

155. Which of the following terms - can serve from two to 200 or more homes and/or
commercial facilities?
156. Which of the following terms - have become an attractive option for many locations,
especially in areas like small lakeside communities?
A. Treatment performance D. Enhanced wastewater treatment system(s)
157. The operation and maintenance requirements of cluster systems will vary based on the
size of the system, the wastewater being treated, and the types of technology used. Various
technologies that can be implemented via a?
A. Cluster system(s) D. Advanced or innovative technologies
158. In the past, state and local wastewater management programs rarely specified O&M
requirements for?
B. Cluster system(s) E. Conventional or enhanced wastewater systems
159. As more and more systems malfunction and threaten waterways and as more systems
include higher maintenance electrical and mechanical components, communities are
recognizing the value of?
B. Conventional system(s) E. Private property
32
160. Many are strengthening programs with a number of tools, including requirements for
homeowner service contracts, routine maintenance inspections, revocable operating permits,
monitoring, and enhanced reporting and data management that support proper ?
B. System performance E. Wastewater alternative technologie(s)
Maintenance Inspections
161. Maintenance inspections are gaining appeal as a management tool to assess the
condition of systems and determine pumping or___________. In some cases, this is a strictly
voluntary program, while in other cases; communities have elected to mandate pumping based
on third party inspections.
A. Other O&M needs D. Alternative and enhanced wastewater technologies
B. Septic tank pumping E. Operation and maintenance inspection programs
C. Advances in technology F. None of the Above
162. Some local agencies have adopted a sewage management program that requires the
annual inspection of systems with newly issued or modified permits and proof of ___________
for all systems.
A. O&M needs D. Alternative and enhanced wastewater technologies
163. Which of the following terms - are usually coupled with a mandatory septic tank pumping
program. The local agency notifies the system owner when pumping is due?
A. O&M needs D. Alternative and enhanced wastewater technologies
164. Typical pumping requirements vary from three to five years or more based on the
____________and individual household wastewater characteristics.
A. Service provider(s) D. Performance-based system
B. Typical pumping requirement(s) E. Daily sewage flow
C. Enhanced system(s) F. None of the Above
165. Alternative and ___________________require additional maintenance and/or ongoing

attention. In states and communities where these systems are authorized, performance
inspections are mandated in the state code or in the system’s operating permit.
A. O&M needs D. Enhanced wastewater technologies
Maintenance of Systems
166. Enhanced systems may also require an increased frequency of inspections to determine if
they are performing as required. These systems are _________and require an annual operating
permit, maintenance contract, and annual inspection from the county health department.
A. Service provider(s) D. Performance-based treatment systems
B. Typical pumping requirement(s) E. Final inspection
33
167. A key part of ___________is to track the maintenance of systems. The only way to ensure
that maintenance contracts are kept in effect and that systems are monitored when required is
for the management entity or regulatory authority to have a structured reporting program.
A. An O&M program D. Alternative and enhanced wastewater technologies
168. Service providers should report maintenance events and any lapses in maintenance
contracts to the management or regulatory authority. This information should be managed in a
database to monitor _______________and provide a system of accountability.
B. Typical pumping requirement(s) E. O&M activities
Operating Permits
169. More complex systems, however, often include_____________, maintenance contracts,
and compliance measures. In the case of a performance-based system, the operating permit
may include specific standards that must be maintained along with monitoring and reporting
requirements.
B. Typical pumping requirement(s) E. Maintenance inspections
OSSF Maintenance
170. Which of the following terms - can add years to an older system. Even well-designed and
properly installed septic systems can fail earlier than expected if previous homeowners did not
perform routine maintenance.
A. Proper maintenance D. Septic tank or ATU
B. Necessary pumping frequency E. Pressure manifold(s)
C. An advanced OWTS F. None of the Above
171. Keep in mind the necessary pumping frequency depends on the size of the household and
the size of the?
A. Sand/media filter(s) D. Onsite system
B. Septic tank or ATU E. Size of the household and the size of the tank
C. Tank F. None of the Above
172. For example, a four-bedroom home with a 1,250-gallon tank should be pumped
approximately every 2.6 years. Modern conveniences such as garbage disposals, hot tubs, or
whirlpools will increase the?
Permit
173. Several factors should be considered when choosing the type of onsite system for a site
including: soil/site limitations, available space, operation and maintenance requirements, initial
costs as well as_______________, landscape disturbance, and the owners' preferences.
B. Septic tank or ATU E. O & M costs
C. Sewage tank F. None of the Above
34
174. Of these considerations, often the most limiting is the ___________or site and space
limitations.
C. Soil resource F. None of the Above
Aerobic Treatment Units (ATUs)

175. A mechanical onsite treatment unit that provides secondary wastewater treatment by
mixing air (oxygen) and aerobic and facultative microbes with the wastewater in a sewage tank.
In Missouri, the minimum construction standards require that __________comply with NSF
Standard 40.
B. ATUs E. Size of the household and the size of the tank
Gravity Effluent Distribution Devices

176. Divide and/or transport the liquid effluent from a ____________ to absorption trenches for
dispersal into the soil. These devices include distribution boxes, drop boxes, and step-downs.
C. OWTS F. None of the Above
Gravity Laterals
177. A system of trenches excavated along ground contours used to distribute effluent by
gravity flow from a _________________and apply the effluent to the soil infiltrative surface.
Dosed Gravity Systems

178. Which of the following terms - can be used to more equally divide effluent between gravity
lateral trenches or to proportion effluent to unequal length trenches?
Advanced Onsite Wastewater Treatment Systems and components include:

Sand filters
179. Which of the following terms - consist of a lined excavation or structure filled with uniform
washed sand that is placed over an under-drain system?
180. The wastewater is dosed onto the surface of the sand through a ____________and
allowed to percolate through the sand to the under-drain system, which collects the filter effluent
for further processing or discharge.
A. Proper maintenance D. Distribution network
35
Other Media Bio-filters
181. _______________ using other more porous materials, (e.g., peat, textile, or foam) to
provide advanced secondary treatment of septic tank effluent.
A. Packed-bed filter(s) D. An above ground treatment system
B. Engineered distribution system(s) E. A subsurface soil dispersal system
C. An OWTS F. None of the Above
Constructed Wetlands
182. An OWTS that incorporates ________________ consisting of one or more lined basins
which may be filled with a medium and where wastewater undergoes some combination of
physical, chemical, and/or biological treatment and evapotranspiration.
Sand Mounds
183. Which of the following terms - that incorporates at least 12 inches of clean sand above
the original soil surface and disperses the treated wastewater into the original soil?
Low-pressure Distribution Systems

184. An OWTS in which pressurized small diameter distribution lines are used for equal
distribution of effluent within the final treatment and?
C. Dispersal component F. None of the Above
Drip Irrigation Systems

185. Which of the following terms - that distributes treated wastewater through drip irrigations
lines?
Suitable Soil
186. One tablespoon of soil can contain over one million microscopic organisms, including
bacteria, protozoa, fungi, molds, and?
A. Effluent D. Some organic material and total suspended solids (TSS)
B. Soil microorganism(s) E. Suitable soil
C. Soil condition(s) F. None of the Above
187. The bacteria and other microorganisms in the soil treat the wastewater and purify it before
it reaches groundwater. But the wastewater must pass through the ___________slowly enough
to provide adequate contact time with microorganisms.
B. Soil microorganism(s) E. Soil
36
188. Which of the following terms - in soil treat wastewater physically, chemically, and
biologically before it reaches the groundwater, preventing pollution and public health hazards?
A. Complex biological community D. Pathogenic bacteria
B. Microorganism(s) E. TSS and organic material
C. Microbial slime(s) F. None of the Above
189. Under some soil conditions, __________may not accept the wastewater or may fail to
properly treat the wastewater unless special modifications to system design are made.
B. Soil microorganism(s) E. Subsurface absorption systems
190. Public health is a major concern because domestic wastewaters contain many substances
that are undesirable and potentially harmful, such as pathogenic bacteria, ___________,
organic matter, toxic chemicals, pharmaceutical drugs (e.g. endocrine disruptors), and excess
nutrients.
A. Complex biological community D. Infectious viruses
191. Which of the following terms - need the same basic conditions as humans do to live and
grow: a place to live, food to eat, water, oxygen to breathe, suitable temperatures, and time to
grow?
192. Soil microorganisms attach themselves to soil particles using microbial slimes and use the
oxygen and water that are present in the?
A. Complex biological community D. Soil pores
193. The first component in an individual sewage treatment system is usually a septic tank,
which removes some organic material and?
A. Effluent D. Total suspended solids (TSS)
194. Which of the following terms - removal is very important because it prevents excessive
clogging of the soil infiltrative surface?
A. Complex biological community D. Pathogenic bacteria
Suitably-textured Soil
195. Which of the following terms - must be deep enough to allow adequate filtration and
treatment of the effluent before it is released into the natural environment?
A. Effluent D. Suitably-textured soil
37
196. Usually this release is into groundwater. It has been determined that three feet of aerated
soil will provide sufficient treatment of?
A. Complex biological community D. Septic tank effluent
197. This three-foot treatment zone provides sufficient detention time for final bacteria
breakdown and sufficient distance for the filtration that is essential for the safe treatment of ?
A. Effluent D. Effluent BOD
Impacts of Effluent on Groundwater

198. Which of the following terms - is overloaded with a treatable contaminant, or when the
contaminant cannot be treated by the soil, the quality of the underlying groundwater may
change significantly?
A. Wastewater D. Soil treatment trench
B. Distribution media E. Dispersal zone
C. Biomat F. None of the Above
199. When a septic system fails to effectively treat and disperse _________, it can become a
source of pollution. This type of failure can occur in three different ways.
A. Pollution of groundwater D. Soil treatment and dispersal zone
B. Effluent E. Unsaturated flow
C. Anaerobic bacteria F. None of the Above
200. The second obvious way that ____________can fail is to have effluent backing up into the
dwelling. It is also important to prevent a third, and less obvious, type of failure, which is
contamination of the ground or surface waters.
A. Septic system D. Soil treatment trench
201. Pollution of groundwater (with nitrogen, pathogens, bacteria, chemicals, etc.) is very
difficult to clean up, since the only access to the water table is through wells, trenches (if the
water table is high enough), or?
Soil Treatment Processes

202. The soil treatment and ____________ provides for the final treatment and dispersal of
septic tank effluent.
38
203. To varying degrees, the _________ and dispersal zone treats the wastewater by acting as
a filter, exchanger, or absorber by providing a surface area on which many chemical and
biochemical processes occur.
A. Pollution of groundwater D. Soil treatment
Biomat
204. As septic tank effluent flows into a soil treatment trench, it moves vertically through the
distribution media to the __________ where treatment begins.
205. The biomat is a biological layer formed by ________, which secrete a sticky substance
and anchor themselves to the soil, rock particles, or other available surfaces.
206. The biomat develops first along the trench bottom, where effluent begins to pond. The
biomat develops along the soil-media contact surfaces on the trench’s sidewalls. When fully
developed, the gray-to-black sticky ________layer is about one inch thick.
207. Unsaturated flow increases the travel time of effluent through the soil, ensuring that it has
sufficient time to contact the surfaces of soil particles and?
B. Effluent E. Microorganisms
208. A properly functioning ________will have wastewater ponded in the distribution media
while the soil a few inches outside of and below the distribution media will be unsaturated.
A. Gravity-fed system D. Soil treatment trench
209. Unsaturated soil has pores containing both air and water so aerobic microorganisms living
in the soil can effectively treat the wastewater as it travels through the?
B. Effluent E. Soil system
210. In order for the wastewater to move through the soil, it must be pulled or wicked through
the fine pores by ?
A. Aerobic bacteria D. Aerobic
B. Clustered wastewater system(s) E. Anaerobic
C. Equilibrium F. None of the Above
39
Sewage Treatment Utilizing Soil
211. A developed biomat reaches ______________ over time, remaining at about the same
thickness and the same permeability if effluent quality is maintained.
A. Final treatment of effluent D. Upstream processes in the treatment train
B. Wastewater flow/strength E. Anaerobic microorganism(s)
C. Quality of the effluent F. None of the Above
212. On the soil side of the biomat beneath the drainfield, oxygen is present so that conditions
are allowing aerobic soil bacteria to feed on and continuously break down the?
A. Aerobic bacteria D. Biomat
213. Which of the following terms - leaving the septic tank decreases because of failure to
regularly pump out the septic tank, more food will be present for the anaerobic bacteria, which
will cause an increase in the thickness of the biomat and decrease its permeability.
B. Wastewater flow/strength E. If the quality of the effluent
214. If seasonally saturated conditions occur in the soil outside the trench, aerobic conditions
will no longer exist, which will prevent _________from breaking down the biomat.
A. Aerobic bacteria D. Aerobic
Site Evaluations
215. The success of any soil-discharging wastewater treatment system depends on the
appropriate match between_______________, the treatment system design, and the site that
receives effluent from the system.
B. Wastewater flow/strength E. Wastewater flow/strength
216. Which of the following terms - observations and characterization by a qualified,

experienced professional is essential to understanding local site conditions and ensuring the
proper operation of individual and clustered wastewater systems?
A. Aerobic bacteria D. Site-specific
Assure System Performance

217. Wastewater systems depend on the soil for 1) final treatment of effluent from the tank or
unit process components, and 2)__________________.
B. Dispersal of the effluent to the soil E. Anaerobic microorganism(s)
40
218. The subsurface “ponding” and slow release of effluent to the soil through the biomat
facilitates treatment via chemical, physical, and biological processes such as________,
adsorption of potential pollutants (e.g., phosphorus), filtration of solids, and decomposition of
organic constituents.
A. Aerobic bacteria D. Upstream processes in the treatment train
B. Clustered wastewater system(s) E. Aerobic nitrification of ammonia
219. Predicting the ____________and overall treatment efficacy of the soil component of the
system requires a fairly comprehensive understanding of how these processes work.
A. Final treatment of effluent D. Pollutant removal
B. Wastewater flow/strength E. Anaerobic microorganism(s)
Basic Onsite Wastewater Treatment Systems and Components

220. Building sewers and other sewer lines: watertight pipes, which carry waste by
_______________ from a building to the onsite system or carry effluent by gravity from sewage
tanks to other system components.
A. Liquid effluent D. System components
B. Gravity E. Lateral trenches
C. Pressure manifolds F. None of the Above
Septic Tanks
221. A watertight, covered container designed and constructed to receive the discharge of
sewage from a building sewer. Its function is to separate solids from liquid, digest organic
matter, store liquids through a period of detention and allow the _________________to
discharge to other components of an onsite system.
A. Biological processes D. Digest organic matter
B. Gravity lateral trenches E. A mechanical onsite treatment unit
C. Clarified liquids F. None of the Above
Septic/Sewage Tank Removal

222. Which of the following terms - need to be properly abandoned to prevent them from
becoming a safety hazard.
B. Unused sewage tanks E. Lateral trenches
Aerobic Treatment Units (ATUs)

223. A mechanical onsite treatment unit that provides _________________by mixing air
(oxygen) and aerobic and facultative microbes with the wastewater in a sewage tank.
B. Gravity lateral trenches E. Secondary wastewater treatment
C. Soil infiltrative surface F. None of the Above
Gravity Effluent Distribution Devices

224. Divide and/or transport the liquid effluent from a septic tank or ____________to absorption
trenches for dispersal into the soil.
B. ATU E. Lateral trenches
41
Gravity laterals
225. A system of trenches excavated along ground contours used to distribute effluent by
gravity flow from a septic tank or ________________and apply the effluent to the soil infiltrative
surface.
B. Gravity lateral trenches E. A mechanical onsite treatment unit
C. ATU F. None of the Above
226. Generally, 18-inch deep trenches are used; however, with _______________can be up to
30 inches deep.
B. Approval trenches E. Lateral trenches
Wastewater Collection System Introduction

227. Every house, restaurant, business, and industry produces waste. Wastewater collection
protects public health and the environment by removing this?
A. Almost infinite D. Wastewater
B. Storm sewers E. Concern
C. Infectious waste and recycling the water F. None of the Above
228. A network of ___________________________ accepts the flow from each building's

sewer connection and delivers it to the treatment facilities.
A. Interconnected pipes D. Wastewater
B. Storm sewers E. Manholes
C. Combined sewers F. None of the Above
229. Wastewater collection is therefore a comprehensive ____________removal system.

A. Almost infinite D. Wastewater
B. Storm sewers E. Plan
C. Liquid waste F. None of the Above
230. Which of the following terms - distributed through this system is about 98% water?
A. Fluid waste D. Wastewater
B. Storm sewers E. Solids
231. The waste floats on, is carried along by, and goes into _________________ in water.
Possible waste includes anything that can be flushed down the drain--human excretion, body
fluids, paper products, soaps and detergents, foods, fats, oil, grease, paints, chemicals,
hazardous materials, solvents, disposable and flushable items; the list is almost infinite.
A. Sewer D. Wastewater
B. Storm sewers E. Drain
C. Suspension or solution F. None of the Above
232. This mixture of water and wastes is called?

A. Sewage D. Wastewater
B. Solids and liquids E. Stink Pickles
C. Combined sewage F. None of the Above
42
233. "Wastewater" is a more accurate description and has become the standard term for this
fluid waste because it encompasses the total _________________ in water that is gathered
from homes and businesses.
A. Slurry of wastes D. Wastewater
B. Storm sewers E. Stink Pickles
Types of Sewer Systems

234. Centralized sewer systems are generally broken out into three different categories:
sanitary sewers, storm sewers, and?
A. Storm drains D. Dark or grey water
B. Storm sewers E. Bad water
235. Underground _________________pipes can clog or break, causing unintentional

"overflows" of raw sewage that flood basements and streets.
A. Sanitary sewer D. Wastewater
B. Storm sewer E. Clay
C. Combined sewer F. None of the Above
236. Which of the following terms - are designed to quickly get rainwater off the streets during
rain events.
A. Drains D. Wastewater
B. Storm sewers E. Streets
237. Most storm sewers do not connect with a _________________, but instead drain directly
into nearby rivers, lakes, or oceans.
A. Treatment plant D. Wastewater factory
B. Storm sewer E. Turd collector
238. Combined sewers carry both wastewater and storm water in the same pipe. Most of the
time, ________________transport the wastewater and storm water to a treatment plant.
A. Wastewater collection system D. Mammals
B. Sewer systems E. Trucks
239. However, when there is too much rain, combined sewer systems cannot handle the extra
volume and designed "________________" of raw sewage into streams and rivers occur.
A. Wastewater collection D. Overflows
B. Sewers E. CMOM
240. The great majority of ________________have separated, not combined, sanitary and
storm water pipes.
A. Wastewater collection system D. Solids
B. Sewer systems E. People
43
241. As the infrastructure in the United States and other parts of the world ages, increasing
importance is being placed on rehabilitating?
A. Wastewater collection system D. Inspecting equipment
B. Sewer systems E. Collection workers
242. Cracks, settling, tree root intrusion, and other disturbances that develop over time
deteriorate pipelines and other conveyance structures that comprise ________________,
including stormwater, sanitary, and combined sewers.
A. Wastewater collection systems D. Septic Tanks
B. Sewer systems E. Stormwater systems
243. Outdated pump stations, undersized to carry sewage from newly developed subdivisions
or commercial areas, can also create a _________________, adversely affecting human health
and degrading the water quality of receiving waters.
A. Wastewater collection system D. FUBAR
B. Potential overflow hazard E. CMOM
244. The maintenance of the _________________is therefore a continuous, never-ending

cycle.
A. Wastewater collection system D. Inspection equipment
B. Sewer system E. Drain
245. As sections of the system age, problems such as corroded concrete pipe, cracked tile, lost
joint integrity, grease, and heavy root intrusion must be?
A. Promoted D. Inspected
B. Patched E. Removed
C. Constantly monitored and repaired F. None of the Above
246. Technology has improved __________________ with such tools as television camera
assisted line inspection equipment, jet-cleaning trucks, and improvements in pump design.
A. Wastewater collection system D. Collection system maintenance
B. Sewer systems E. The space shuttle
247. Because of the increasing complexity of wastewater collection systems, ______________

is evolving into a highly skilled trade.
A. Wastewater treatment D. The operator
B. Collection system maintenance E. Management
C. Combined careers F. None of the Above
248. Collection system operators are charged with __________________ and the environment,
and therefore must have documented proof of their certifications in the respective wastewater
management systems.
A. Protecting public health D. Inspecting
B. Making arrests E. Debt
C. Smoking out F. None of the Above
44
249. These professionals ensure that the system pipes remain clear and open. They eliminate
obstructions and are constantly striving to ___________________________. They keep the
wastewater moving underground, unseen and unheard.
A. Find problems D. Inspect equipment
B. Create problems E. Hide from the public
C. Improve flow characteristics F. None of the Above
250. Because this ___________________________ and the professionals who maintain it

operate at such a high level of efficiency, problems are very infrequent. So much so that the
public often takes the wastewater collection system for granted. In truth, these operators must
work hard to keep it functioning properly.
A. Wastewater collection system D. Inspection equipment
B. Sewer system E. Pecking order
Sewer Main
251. In a centralized __________________, the sewer to which sewer connections are made
from individual residences.
A. Sewer pipe D. Manhole
B. Wastewater treatment system E. Building
Trunk Lines
252. Sewer pipes measuring more than 12 inches in diameter and having a capacity of 1 to 10
million gallons per day. Trunk lines connect smaller sewer pipes, or ___________________, to
the largest transport pipes or interceptors.
A. Manholes D. Services
B. Wastewater treatment system E. Collectors
Collectors
253. Small ___________________ measuring twelve inches or less in diameter.
A. Manholes D. Inspection equipment
B. Services E. Sewer pipes
Wastewater Collection Rules and Regulations

Rule to Protect Communities from Overflowing Sewers
254. Which of the following terms - has clarified and expanded permit requirements under the
Clean Water Act for 19,000 municipal sanitary sewer collection systems in order to reduce
sanitary sewer overflows?
A. POTW D. NPDES
B. CWA or Act E. OSFF
C. EPA F. None of the Above
255. The requirements will help communities improve some of our Nation’s most valuable
infrastructure –our wastewater collection systems–by requiring facilities to develop and
implement new capacity, management, operation, and maintenance programs and?
A. POTW's D. NPDES
B. CWA E. OSHA
45
256. The 19,000 systems covered by this rule include 4,800 municipal satellite collection
systems which will be directly regulated under the ___________________for the first time.
A. POTW's D. NPDES
B. Law E. CWA or Act
Clean Water Act (Rule) Summary

33 U.S.C. s/s 1251 et seq. (1977)
257. Which of the following terms - is a 1977 amendment to the Federal Water Pollution
Control Act of 1972, which set the basic structure for regulating discharges of pollutants to
waters of the United States?
A. POTW's D. NPDES
B. Law E. CWA
258. The law gave ___________________the authority to set effluent standards on an industry
basis and continued the requirements to set water quality standards for all contaminants in
surface waters.
A. POTW's D. NPDES
B. OSHA E. CWA
259. The CWA makes it unlawful for any person to discharge any pollutant from a point source
into navigable waters unless a permit (___________________) is obtained under the Act.
A. POTW's D. NPDES
B. OSHA E. CWA
260. The 1977 amendments focused on toxic pollutants. In 1987, the ___________________
was reauthorized and again focused on toxic substances, authorized citizen suit provisions, and
funded sewage treatment plants (POTW's) under the Construction Grants Program.
A. POTW's D. NPDES
B. Law E. CWA
261. The CWA provisions for the delegation by the ___________________ of many permitting,
administrative, and enforcement aspects of the law to state governments. In states with the
authority to implement CWA programs, the EPA still retains oversight responsibilities.
A. POTW's D. NPDES
B. OSHA E. CWA
262. In 1972, ___________________ enacted the first comprehensive national clean water
legislation in response to growing public concern for serious and widespread water pollution.
A. POTW's D. NPDES
B. OSHA E. CWA
46
263. Which of the following terms - is the primary federal law that protects our nation’s waters,
including lakes, rivers, aquifers, and coastal areas. Lake Erie was dying?
A. POTW's D. NPDES
264. Which of the following terms - primary objective is to restore and maintain the integrity of
the nation's waters?
A. POTW's D. NPDES
265. Which of the following terms - focuses on improving the quality of the nation’s waters. It
provides a comprehensive framework of standards, technical tools and financial assistance?
A. POTW's D. NPDES
266. Which of the following terms - requires major industries to meet performance standards to
ensure pollution control; charges states and tribes with setting specific water quality criteria
appropriate for their waters?
A. POTW's D. NPDES
267. Which of the following terms - provides funding to states and communities to help them
meet their clean water infrastructure needs?
A. POTW's D. NPDES
268. After 25 years, the ___________________continues to provide a clear path for clean
water, and a solid foundation for an effective national water program.
A. POTW's D. NPDES
In 1972
269. Only a third of the ___________________were safe for fishing and swimming. Wetlands
losses were estimated at about 460,000 acres annually.
A. Nitrogen levels D. Lakes and Rivers
B. Phosphorus and nitrogen E. Fish
C. Wetlands F. None of the Above
270. Agricultural runoff resulted in the erosion of 2.25 billion tons of soil and the deposit of large
amounts of _____________________into many waters. Sewage treatment plants served only
85 million people.
A. Nitrogen levels D. Lakes and Rivers
B. Phosphorus and nitrogen E. Fish
47
Today
271. Two-thirds of the nation's waters are safe for fishing and swimming. The rate of annual
wetlands _____________________is estimated at about 70,000-90,000 acres according to
recent studies.
A. Nitrogen levels D. And lakes l
B. Losses E. Including fish
C. Replenishment F. None of the Above
272. The amount of soil lost due to ______________________ has been cut by one billion tons
annually, and phosphorus and nitrogen levels in water sources are down. Modern wastewater
treatment facilities serve 173 million people.
A. Nitrogen levels D. Losses
B. Agricultural runoff E. Pollution
C. Dust F. None of the Above
The Future
273. All Americans will enjoy clean water that is safe for ________________________. We will
achieve a net gain of wetlands by preventing additional losses and restoring hundreds of
thousands of acres of wetlands.
A. Fishing and swimming D. Drinking
B. Hunting and Camping E. Birds
C. Preservation F. None of the Above
274. Soil erosion and runoff of phosphorus and nitrogen into watersheds will be minimized,
helping to sustain the nation's farming?
A. Nitrogen levels D. Additional losses
B. Economy and aquatic systems E. Discharges
CMOM - "Capacity, Management, Operation and Maintenance"

275. Proper function of sanitary sewer systems is vital to protect public health, property, and
waterways in the surrounding area. Most utilities have a management, operation, and
maintenance (_______________________) plan to ensure their system is in working order.
A. OSSF D. Clean Water Act
B. CMOM or MOM E. SSOs
C. Infiltration and Inflow (I/I) F. None of the Above
276. More than 40,000 sanitary sewage overflows _______________________ occur every
year, causing huge monetary losses, damage to fish/shellfish beds, polluting groundwater, and
decreased tourism.
277. Which of the following terms - release raw sewage from the collection system before it
can reach a treatment facility?
48
278. Sewage _______________________, into businesses and homes, and eventually ends
up in local waterways.
B. CMOM or MOM E. Is not harmful
279. Many factors are involved in _______________________. Many municipalities started

constructing sewer systems over 100 years ago. Some of these have not been adequately
maintained, improved, or repaired over the last century.
280. Cities have used a wide variety of building materials, designs, and installation techniques,
which aren’t _______________________to withstand heavy, continuous use.
281. Problems can be especially bad where an older system is attached to a new system or an
older system has?
A. OSSF D. Problems
282. Which of the following terms - is a release of untreated wastewater before the flow
reaches a treatment plant. SSOs pose a significant threat to public health and water quality.
The term or means or and is only here to help you in answering the question. Not a trick
Municipality Self-Assessment
283. Under the MOM Programs Project, Region 4 invites municipalities to undertake a detailed
self-assessment of their _______________________programs.
284. The municipalities submit this self-assessment along with recommendations for
improvements to the _______________________ programs and/or remedial measures to
correct sewer infrastructure problems.
B. SSOs E. CMOM or MOM
49
285. In consideration for undertaking the self-assessment, the municipality is able to establish
its own reasonable goals and schedules, and the Region may use its discretion to significantly
reduce penalties related to?
286. Where an enforcement action is necessary, the Region works with the municipality to
identify necessary _______________________and to establish schedules. The Region will
likely defer any penalty decision until after the completion of the necessary improvements.
B. Permits E. Maintenance
Project Initiation
287. In 1998, Region 4 began the _______________________Programs Project by identifying
priority watersheds and geographical areas in each of the eight States in the Region.
288. These included areas where _______________________ could cause significant public
health concerns, such as beaches, shellfish harvesting areas and drinking water supplies. In
addition, watersheds already listed as impaired by collection system overflows or bacterial
contamination were identified.
289. Those municipalities wanting to participate in the _______________________ Project

undertake the self-assessment using the guidance materials provided and submit the self-
assessment to the Region within seven months of the kickoff.
Infiltration and Inflow (I/I)

290. ________________________occurs when rain or snowmelt enters the ground and seeps
into leaky sanitation sewers, which were not designed to carry rainfall or drain property.
A. Sanitary Sewer Overflows (SSOs) D. Inflow
B. Line/main breaks E. Leaks
291. Which of the following terms - can also occur when excess waters from roof drains,
broken pipes and bad connections at sewer service lines infiltrates the sanitary sewer?
50
Structural Failures
292. Which of the following terms - are a major result of structural failure. Undersized systems
do not have large enough pumps or lines to carry all the sewage generated by the buildings
attached to them. This is especially true for new subdivisions or commercial areas.
293. Some cities estimate that up to 60% of ________________________come from service

lines.
What are Sanitary Sewer Overflows?

294. Which of the following terms - are discharges of raw sewage from municipal sanitary
sewer systems?
295. Which of the following terms - can release untreated sewage into basements or out of
manholes and onto city streets, playgrounds, and into streams before it can reach a treatment
facility.
The term or means or and is only here to help you in answering the question. Not a
trick.
296. Which of the following terms - are often caused by blockages and breaks in the sewer
lines?
Why do Sewers Overflow?

297. SSOs occasionally occur in almost every ______________________, even though
systems are intended to collect and contain all the sewage that flows into them.
298. When ______________________happen frequently, it means something is wrong with

the system.
51
Problems that Can Cause Chronic SSOs Include:
299. Infiltration and Inflow (I&I): too much rainfall or snowmelt infiltrating through the ground
into leaky sanitary sewers not designed to hold rainfall or to drain property, and excess water
inflowing through roof drains connected to sewers, broken pipes, and?
A. Break or collapse D. Badly connected sewer service lines
B. Infiltration and inflow E. Carry sewage
C. Inflow F. None of the Above
300. Undersized Systems: Sewers and pumps are too small to _____________________ from
newly-developed subdivisions or commercial areas.
301. Pipe Failures: blocked, broken or cracked pipes, tree roots grow into the sewer, sections
of pipe settle or shift so that pipe joints no longer match, and sediment and other material builds
up causing pipes to?
302. Sewer Service Connections: discharges occur at ____________________ to houses and

other buildings; some cities estimate that as much as 60% of overflows comes from the service
lines.
B. Infiltration and inflow E. Sewer service connections
303. Deteriorating Sewer System: ____________________, improper maintenance;

widespread problems that can be expensive to fix develop over time.
A. Combined Sewer Overflows D. Sanitary Sewer Overflows (SSOs)
B. Infiltration and inflow E. Maintenance activities
C. Improper installation F. None of the Above
Why are SSOs a Problem?

304. The EPA has found that ____________________________ caused by poor sewer
collection system management pose a substantial health and environmental challenge. The
response to this challenge varies considerably from state to state.
305. Many municipalities have asked for national consistency in the way permits are
considered for wastewater discharges, including ___________________________, and in
enforcement of the law prohibiting unpermitted discharges.
52
306. This SSO Federal Advisory Subcommittee examines the need for national consistency in
permitting and enforcement, effective sewer operation and maintenance principles, public
notification for ___________________________ with potential health or environmental dangers,
and other public policy issues.
307. The EPA carefully considers the Subcommittee's recommendations for regulatory and
nonregulatory actions to reduce ___________________________ nationally.
How Big is the SSO Problem?

308. The total number of ___________________________ that occur nationwide each year is
not known. In some areas, they might not be reported or are underreported to the EPA and
state environmental agencies. Two surveys, however, help to define the size of the problem:
309. In a 1994 survey of 79 members of the Association of Metropolitan Sewerage Agencies,

65 percent of the respondents reported wet weather?
310. Municipal respondents with ___________________________had only limited information

about them. Only 60 percent had estimated the annual number. Half of those had estimated the
amount of sewerage discharged, and 17 percent had determined what pollutants were in their
overflows.
Combined Sewer Overflow Section

311. Which of the following terms - are sewers that are designed to collect rainwater runoff,
domestic sewage, and industrial wastewater in the same pipe?
A. Combined Sewer systems D. Sanitary Sewer Overflows (SSOs)
312. Most of the time, ___________________________transport all of their wastewater to a

sewage treatment plant, where it is treated and then discharged to a water body.
A. Combined Sewer systems D. Sanitary Sewer Overflows (SSOs)
53
313. Which of the following terms - are designed to overflow occasionally and discharge
excess wastewater directly to nearby streams, rivers, or other water bodies?
A. Combined Sewer Overflows D. Sanitary Sewer systems
314. These overflows, called ___________________________contain not only storm water but
also untreated human and industrial waste, toxic materials, and debris.
315. They are a major water pollution concern for the approximately 772 cities in the U.S. that
have combined sewer systems. ___________________________may be thought of as a type
of "urban wet weather" discharge.
316. Which of the following terms - and storm water discharges, they are discharges from a
municipality's wastewater conveyance infrastructure that are caused by precipitation events
such as rainfall or heavy snowmelt?
317. The Policy provides guidance on how communities with combined sewer systems can
meet Clean Water Act goals in as flexible and cost-effective a manner as possible. EPA's
Report to Congress on implementation of the ___________________________Control Policy
assesses the progress made by EPA, states, and municipalities in implementing and enforcing
the CSO Control Policy.
A. Combined Sewer Overflows or (CSOs) D. Sanitary Sewer Overflows (SSOs)
The Elements of a Proper CMOM Program

Utility Specific
318. The complexity and expense associated with a utility's CMOM or MOM programs is
specific to the size and complexity of the __________________and related infrastructure.
Factors such as population growth rate and soil/groundwater conditions also dictate the level of
investment which should be made.
A. Maintenance activities D. Goals
B. POTW E. Properly maintained
C. MOM F. None of the Above
Purposeful
319. When MOM programs are present and __________________, they support customer
service and protect system assets, public health, and water quality.
54
Goal-Oriented
320. Which of the following terms - programs have goals directed toward their individual
purposes. Progress toward these goals is measurable, and the goals are attainable.
Uses Performance Measures

321. Performance measures should be established for each MOM program in conjunction with
the program goal. These __________________, and used in determining progress to, or
beyond, the program goal.
A. Maintenance activities D. Measures are quantifiable
What Costs are Involved with Reducing or Eliminating SSOs?

322. _______________________are a valuable part of the nation's infrastructure. The EPA
estimates that our nation's sewers are worth a total of more than $1 trillion.
A. Rehabilitation or Upgrading sewer D. Performance measures
B. SSOs E. Evaluation
C. Sanitary sewer collection systems F. None of the Above
323. The collection system of a single large municipality is an asset ___________________ of

dollars and that of a smaller city could cost many millions to replace.
324. Sewer _______________________to reduce or eliminate SSOs can be expensive, but the
cost must be weighed against the value of the collection system asset and the added costs if
this asset is allowed to further deteriorate.
325. Ongoing maintenance and _____________ adds value to the original investment by
maintaining the system's capacity and extending its life.
A. Rehabilitation D. Performance measures
326. The costs of rehabilitation and other measures to correct _____________ can vary widely
by community size and sewer system type.
55
Overflow Response Plan
327. The overflow response plan should be designed provide a quick response to?
System Evaluation and Capacity Assurance Plan

328. These two activities work hand-in-hand to detect and address deficiencies and
scheduling. These will provide an __________________________ of parts of the collection
system that have substandard performance.
329. Performance measures and indicators are important in evaluating collection system
performance and ____________________________, operation and maintenance programs.
B. SSOs E. Implementing capacity management
Communication/Notification
330. If an ____________________________ occurs, sanitary sewer facilities will be required to
immediately notify the NPDES permit authority.
B. SSOs E. Record keeping provisions
331. Facilities must post locations of recurrent _____________ and let the public know that the
annual report is available to them.
332. The ____________________________ mandate that facilities must maintain records for
three years about all overflows, complaints, work orders on the system, and implementation
measures.
333. According to the EPA, an effective __________________________ program would help

NPDES permitees to: Develop/revise routine preventive maintenance activities that prevent
service interruption and protect capital investments.
A. Rehabilitation or Upgrading sewer D. MOM
B. SSOs E. CMOM
334. Create an ____________________________ and respond to the inspection results.

A. Inspection schedule D. Performance measures
C. Hydraulic (capacity) F. None of the Above
56
335. Investigate the causes of ____________________________ and take corrective
measures.
336. Respond quickly to ____________________________ to minimize impacts to human

health and the environment.
337. Identify ____________________________ and physical deficiencies and prioritize

responses, including capital investments.
338. Identify and develop ____________________________ to program deficiencies (e.g., lack

of legal authority, inadequate funding, and inadequate preventive maintenance).
A. Inspection schedule D. Procedures
B. SSOs E. Appropriate responses
C. Skill of the responding crews F. None of the Above
Continuous Training
339. Which of the following terms - for emergency response plans should be understood and
practiced by all personnel in order to ensure safety of the public and the collection system
personnel responding?
340. Which of the following terms - should be specific to the type of emergency that could
occur?
341. The ability to deal with emergencies depends on the knowledge and _______________, in
addition to availability of equipment.
342. The crew should be able to _____________________ in the field under stress and select
the right equipment needed to correct the problem.
A. Routine preventative operations D. Rapidly diagnose problems
B. Procedures E. Be utilized to perform
C. Exceed the capacity of staff F. None of the Above
57
343. If resources are limited, consideration should be given to contracting other departments or
private industries to respond to some emergency situations, for example, those rare
emergencies that would?
Routine Preventative O&M Activities – Wastewater Collection Lines

344. Which of the following terms - and maintenance activities for wastewater collection lines
shall be performed by the system’s personnel and outside contractors?
345. A qualified outside contractor can also ________________________ hydraulic cleaning

using a jet hydro-vac combination truck and mechanical cleaning using a rodding machine.
346. Which of the following terms - including cleaning and removing roots from small and large
diameter lines?
B. Procedures E. Routine operations and maintenance activities
347. Closed-circuit television (CCTV) is used to assess the condition of the sewers. There are
four types of activities that the system or a CCTV contractor can also perform: 1) inspect new
work, 2) inspect condition of older portions of the wastewater collection system, 3) routine
inspection of approximately 10% of the wastewater collection, and 4) _____________________
to determine the cause of selected overflow events. Manhole inspection, manhole coating (to
prevent concrete deterioration) and manhole painting (for roach control) are also routinely
performed.
A. Routine preventative operations D. Routine operations and maintenance activities
B. Damage your system E. Necessary process
C. Problem identification F. None of the Above
348. Sewer filled with grass will ________________________, pumps, and upset the
wastewater treatment system. Require your industrial users like golf courses to install grass,
grease, and sand/oil interceptors.
349. Certain compounds and undesirable solids, like grease and grass clippings, can disturb
this delicate balance and ________________________ at the wastewater treatment facility.
58
350. There are compounds and mixtures that should never be introduced into a?
A. Stormwater Program D. Permit conditions
B. Sanitary sewer system E. NPDES
C. WET F. None of the Above
National Pollutant Discharge Elimination System (NPDES) Permit Program

351. The Clean Water Act requires that all point source wastewater dischargers obtain and
comply with an ________________________ permit.
352. Which of the following terms - permits regulate the discharges from publicly owned
wastewater treatment facilities, other wastewater treatment facilities?
353. The ________________________ program also regulates wet weather discharges such
as stormwater discharges from industrial activities (e.g. factory stormwater runoff) and municipal
stormwater discharges including urban storm-water runoff, combined sewer overflows, and
storm sewer overflows.
354. Which of the following terms - permits are developed to ensure that such discharges to
receiving waters are protective of human health and the environment?
355. Violations of permit conditions are enforceable under the ________________________.

The EPA uses a variety of techniques to monitor permittee compliance status, including on-site
inspections and review of data submitted by permittees. NPDES permits are issued for a term of
five years (or less).
C. Clean Water Act F. None of the Above
Wastewater Collection
356. A very economical and quick method of determining if a new sewer line is straight and
unobstructed is called “_______________________” and can be done with a mirror and a bright
source of light, for example a headlight at night or Sunlight.
A. Flamer D. Candling
B. Lamping E. Lighting
C. Natural lighting F. None of the Above
59
357. Which of the following terms - coupled with a good cleaning program can be a highly
effective maintenance tool.
A. Gravity-flow D. Video inspection
B. Lamping E. Taste testing
C. Natural elevation F. None of the Above
358. Which of the following terms - your lines, restrictions caused by debris, roots and grease
buildup can be prevented?
A. Video inspection D. Bucketing
B. By cleaning and root sawing E. Rodding
C. Gravity-flow sanitary sewers F. None of the Above
359. Sewage collection systems that have video inspection closed circuit television (CCTV) and
cleaning programs, _______________________in the number of emergency calls because the
system was cleaned and potential trouble spots were located prior to problems occurring.
A. Video inspection D. Bucketing
B. By cleaning and root sawing E. Rodding
C. Gravity-flow sanitary sewers F. None of the Above
360. Sanitary sewers are designed to transport the wastewater by utilizing the potential energy
provided by the _______________________ of the earth resulting in a downstream flow.
A. Gravity-flow D. Video inspection
B. Lamping E. Taste testing
C. Natural elevation F. None of the Above
361. This energy, if not designed properly, can cause losses due to free falls, _____________,
and sharp bends.
A. Designed to follow the topography of the land
B. Dissipate excess potential energy
C. Turbulent junctions
D. Population served, density of population, and water consumption
E. Based on the quantity of wastewater to be transported
F. None of the Above
362. Sewer systems are designed to?

C. Maintain proper flow velocities with minimum head loss
363. Higher elevations in the system may find it necessary to?

60
364. Design flows are?
365. Flow is determined largely by?

366. Sanitary sewers should be?

C. Designed for peak flow of population
E. Designed separate from the sanitary system
367. Stormwater inflow is highly discouraged and should be?

368. Gravity-flow sanitary sewers are usually _________________________and to flow full or

nearly full at peak rates of flow and partly full at lesser flows.
369. Most of the time the flow surface is exposed to the atmosphere within the sewer and it
functions as an open channel. At extreme peak flows the wastewater will?
A. Surcharge back into the manholes
B. Evaluate the capacity
C. Protect the health of the customers we serve
E. Understanding of flow velocities
61
370. In order to design a sewer system, many factors are considered. The purpose of this topic
is to aid in the ____________________and design depths of flow.
D. Understanding of flow velocities
E. None of the Above
371. The ultimate goal for our industry is to____________________. This is achieved by
prevention of sewer manhole overflows.
Sewer System Capacity Evaluation - Testing and Inspection

372. The collection system owner or operator should have a program in place to periodically
____________________ of the sewer system in both wet and dry weather flows and ensure the
capacity is maintained as it was designed.
373. The ____________________builds upon ongoing activities and the everyday preventive
maintenance that takes place in a system.
A. General inspection D. Address hydraulic deficiencies
B. Flow and rainfall monitoring E. Continuously update
C. Capacity evaluation program F. None of the Above
374. The system then undergoes general inspection which serves to ____and add to the
inventory information.
Capacity Limitations
375. The next step in the ____________________is to identify the location of wet weather
related SSOs, surcharged lines, basement backups, and any other areas of known capacity
limitations.
C. Capacity evaluation F. None of the Above
62
376. These areas warrant further investigation in the form of ____________________and
inspection procedures to identify and quantify the problem.
377. The reviewer should determine that the capacity evaluation includes an estimate peak
flows experienced in the system, an estimate of the ____________________ components, and
identifies the major sources of I/I that contribute to hydraulic overloading events.
A. Alleviate capacity limitations D. Address hydraulic deficiencies
B. Flow and rainfall monitoring E. Options or alternatives
C. Capacity of key system F. None of the Above
378. The capacity evaluation should also make use of a hydraulic model. This model will help
identify areas that need to?
379. Short and long term alternatives to _____________________should be identified,

prioritized, and scheduled for implementation.
380. A sewer inspection is an important part of a sewer system capacity evaluation and
determining your?
Flow Monitoring
381. Fundamental information about the collection system is obtained by?
A. Flow monitoring D. Temporary monitoring
B. Records of each inspection E. Base flow
C. Discharge point F. None of the Above
382. Which of the following terms - provides information on dry weather flows as well as areas
of the collection system potentially affected by I/I.
383. Which of the following terms - may also be performed for billing purposes, to assess the
need for new sewers in a certain area, or to calibrate a model?
63
384. Permanent installations are done at key points in the collection system such as the
_________ of a satellite collection system, pump stations, and key junctions.
385. Which of the following terms - consists of flow meters typically installed for 30-90 days?
Sewer Cleaning
386. The purpose of ______________________is to remove accumulated material from the
sewer.
A. Preventing blockages D. Scraping
B. Lamping E. Rodding
C. Sewer cleaning F. None of the Above
387. Which of the following terms - helps to prevent blockages and is also used to prepare the
sewer for inspections.
A. Prevent blockages D. Scraping
B. Identify E. Rodding
C. Cleaning F. None of the Above
388. Stoppages in gravity sewers are usually caused by a structural defect, poor design, poor
construction, an ______________________, or root intrusion.
B. Identify E. Rodding
389. Protruding traps (lateral sewer connections ______________________ so that they

protrude into the main sewer) may catch debris, which then causes a further buildup of solids
that eventually block the sewer.
B. Incorrectly installed E. Rodding
Sewer Cleaning Methods

390. There are three major methods of ______________________: hydraulic, mechanical, and
chemical.
391. Hydraulic ______________________ refers to any application of water to clean the pipe.
64
392. Mechanical ___________________ uses physical devices to scrape, cut, or pull material
from the sewer.
393. Chemical cleaning can ___________________ the control of odors, grease buildup, root
growth, corrosion, and insect and rodent infestation.
A. Prevent blockages D. Identify
B. Recordkeeping E. Facilitate
C. Identified F. None of the Above
Sewer Cleaning Records

394. The backbone of an effective sewer cleaning program is accurate recordkeeping. Accurate
___________________ provides the collection system owner or operator with information on
the areas.
395. The owner or operator should be able to ___________________ problem collection

system areas, preferably on a map.
396. Potential problem areas ___________________ should include those due to grease or
industrial discharges, hydraulic bottlenecks in the collection system, areas of poor design (e.g.,
insufficiently sloped sewers), areas prone to root intrusion, sags, and displacements.
A. Prevent blockages D. Cleaning
397. The connection between problem areas in the collection system and the preventive
maintenance _________________ schedule should be clear.
B. Stoppages E. Facilitate
398. The owner or operator should also be able to identify the number of ________________
experienced per mile of sewer pipe.
B. Stoppages E. Facilitate
Infiltration and Inflow

399. Which of the following terms - occurs when groundwater enters the sewer system through
cracks, holes, faulty connections, or other openings?
A. Inflow D. Sewer taste
B. Infiltration E. Leaks
C. I/I F. None of the Above
65
400. Which of the following terms - occurs when surface water such as storm water enters the
sewer system through roof downspout connections, holes in manhole covers, illegal plumbing
connections, or other defects?
A. Inflow D. Sewer odors
B. Infiltration E. Leaks
C. I/I F. None of the Above
66

Sewer and Septic Construction

Uploaded by

Copyright:

Available Formats

Sewer and Septic Construction

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sewer and Septic Construction

Uploaded by

Copyright:

Available Formats

Registration form

Sewer and Septic Construction CEU Training Course $200.00

Start and finish dates: _____________________________________

Email____________________________________ Fax (____)_______________________

Operator ID #____________________________________Exp. Date______________

Oregon CCC ($50 additional fee) __________ Other ____________________

Technical Learning College PO Box 3060, Chino Valley, AZ 86323

If you’ve paid on the Internet, please write your Customer#______________

Please invoice me, my PO#_________________________________________

AFFIDAVIT OF EXAM COMPLETION

Rush Grading Service

Do not solely depend on TLC’s Approval list for it may be outdated.

A second certificate of completion for a second State Agency $50 processing

Method of Course acceptance confirmation. Please fill this section

Website __ Telephone Call___ Email____ Spoke to___________________

Do not solely depend on TLC’s Approval list for it may be outdated.

What is the course approval number, if necessary? ____________________

Please circle, underline, bold or X only one correct answer

Additional certificate for another Agency – additional fee $50

Please fax the answer key to TLC

Rush Grading Service

E-MAIL _________________________________ PHONE _____________________

PLEASE COMPLETE THIS FORM BY CIRCLING THE NUMBER OF THE

1. Please rate the difficulty of your course.

2. Please rate the difficulty of the testing process.

4. How did you hear about this Course? ____________________________________

5. What would you do to improve the Course?

How about the price of the course?

Poor_____ Fair ____ Average ____ Good____ Great_____

How was your customer service?

Poor___ Fair ____ Average ____ Good _____ Great_____

Any other concerns or comments.

Onsite Sewage Facilities (OSSF)

2. Onsite/decentralized wastewater treatment systems, commonly called _______________,

What is EPA doing to help manage onsite systems?

9. EPA sponsors state-of-the-art research on ____________technologies through

11. EPA promotes homeowner awareness to strengthen?

(s) means the answer may be plural or singular in nature.

Types of Sewer Systems

20. Leaking, overflowing, and insufficient ______________can release untreated wastewater

Onsite Treatment Processes

Basic Onsite Treatment Processes

(s) means the answer may be plural or singular in nature.

Elevated (Mound or At-Grade) Systems

Aerobic Treatment Units

71. In single-pass or intermittent filter design, _______________is pump-dosed uniformly onto

(s) means the answer may be plural or singular in nature.

Submerged-Flow Wetland or Vegetative Submerged-Bed (VSB)

Cluster System Applications

Septic System Failures

Improving OSSF Treatment through Performance Requirements

88. New technologies and ______________are based on defining the performance

System Design Considerations

(s) means the answer may be plural or singular in nature.

102. __________________ and access to repair parts.

103. Maintenance needs, including frequency and?

Permitting and Approval Process

105. It is important that the application include___________, narratives, forms, calculations,

These records should reflect:

Email______________ Fax ()_

Operator ID #______________________Exp. Date

Oregon CCC ($50 additional fee) Other __________

Website Telephone Call_ Email Spoke to_______________

E-MAIL _____________ PHONE _

Poor_ Fair Average Good Great_

Poor_ Fair Average Good _ Great___