CHAPTER 11

11.1. Show that Exs = Aej k0 z+φ is a solution to the vector Helmholtz equation, Sec. 11.1, Eq. (16), for
√
k0 = ω µ0 0 and any φ and A: We take

d2
Aej k0 z+φ = (j k0 )2 Aej k0 z+φ = −k02 Exs
dz2

11.2. Let E(z, t) = 200 sin 0.2z cos 108 tax + 500 cos(0.2z + 50◦ ) sin 108 tay V/m. Find:
a) E at P (0, 2, 0.6) at t = 25 ns: Obtain

EP (t = 25) = 200 sin [(0.2)(0.6)] cos(2.5)ax + 500 cos [(0.2)(0.6) + 50(2π)/360] sin(2.5)ay
= −19.2ax + 164ay V/m

b) |E| at P at t = 20 ns:

EP (t = 20) = 200 sin [(0.2)(0.6)] cos(2.0)ax + 500 cos [(0.2)(0.6) + 50(2π)/360] sin(2.0)ay
= −9.96ax + 248ay V/m


Thus |EP | = (9.96)2 + (248)2 = 249 V/m.
c) Es at P : Es = 200 sin 0.2zax − j 500 cos(0.2z + 50◦ )ay . Thus

EsP = 200 sin [(0.2)(0.6)] ax − j 500 cos [(0.2)(0.6) + 2π(50)/360] ay

= 23.9ax − j 273ay V/m

11.3. An H field in free space is given as H(x, t) = 10 cos(108 t − βx)ay A/m. Find
a) β: Since we have a uniform plane wave, β = ω/c, where we identify ω = 108 sec−1 . Thus
β = 108 /(3 × 108 ) = 0.33 rad/m.
b) λ: We know λ = 2π/β = 18.9 m.
c) E(x, t) at P (0.1, 0.2, 0.3) at t = 1 ns: Use E(x, t) = −η0 H (x, t) = −(377)(10) cos(108 t −
βx) = −3.77 × 103 cos(108 t − βx). The vector direction of E will be −az , since we require that
S = E × H, where S is x-directed. At the given point, the relevant coordinate is x = 0.1. Using
this, along with t = 10−9 sec, we finally obtain

E(x, t) = −3.77 × 103 cos[(108 )(10−9 ) − (0.33)(0.1)]az = −3.77 × 103 cos(6.7 × 10−2 )az
= −3.76 × 103 az V/m

11.4. In phasor form, the electric field intensity of a uniform plane wave in free space is expressed as
Es = (40 − j 30)e−j 20z ax V/m. Find:
a) ω: From the given expression, we identify β = 20 rad/m. Then ω = cβ = (3 × 108 )(20) =
6.0 × 109 rad/s.
b) β = 20 rad/m from part a.

182
11.4. (continued)
c) f = ω/2π = 956 MHz.
d) λ = 2π/β = 2π/20 = 0.314 m.
e) Hs : In free space, we find Hs by dividing Es by η0 , and assigning vector components such that
Es × Hs gives the required direction of wave travel: We find

40 − j 30 −j 20z
Hs = e ay = (0.11 − j 0.08)e−j 20z ay A/m
377

f) H(z, t) at P (6, −1, 0.07), t = 71 ps:

   
H(z, t) = Re Hs ej ωt = 0.11 cos(6.0 × 109 t − 20z) + 0.08 sin(6.0 × 109 t − 20z) ay

Then
  
H(.07, t = 71ps) = 0.11 cos (6.0 × 109 )(7.1 × 10−11 ) − 20(.07)
 
+ .08 sin (6.0 × 109 )(7.1 × 10−11 ) − 20(.07) ay
= [0.11(0.562) − 0.08(0.827)]ay = −6.2 × 10−3 ay A/m

11.5. A 150-MHz uniform plane wave in free space is described by Hs = (4 + j 10)(2ax + j ay )e−jβz A/m.
a) Find numerical values for ω, λ, and β: First, ω = 2π × 150 × 106 = 3π × 108 sec−1 . Second,
for a uniform plane wave in free space, λ = 2πc/ω = c/f = (3 × 108 )/(1.5 × 108 ) = 2 m.
Third, β = 2π/λ = π rad/m.
b) Find H(z, t) at t = 1.5 ns, z = 20 cm: Use

H(z, t) = Re{Hs ej ωt } = Re{(4 + j 10)(2ax + j ay )(cos(ωt − βz) + j sin(ωt − βz)}

= [8 cos(ωt − βz) − 20 sin(ωt − βz)] ax − [10 cos(ωt − βz) + 4 sin(ωt − βz)] ay

and time, ωt − βz = (3π × 108 )(1.5 × 10−9 ) − π(0.20) = π/4. And

. Now at the given position √
cos(π/4) = sin(π/4) = 1/ 2. So finally,

1  
H(z = 20cm, t = 1.5ns) = − √ 12ax + 14ay = −8.5ax − 9.9ay A/m
2

c) What is |E|max ? Have |E|max = η0 |H |max , where

|H |max = Hs · Hs∗ = [4(4 + j 10)(4 − j 10) + (j )(−j )(4 + j 10)(4 − j 10)]1/2 = 24.1 A/m

Then |E|max = 377(24.1) = 9.08 kV/m.

183
11.6. Let µR = R = 1 for the field E(z, t) = (25ax − 30ay ) cos(ωt − 50z) V/m.
a) Find ω: ω = cβ = (3 × 108 )(50) = 15.0 × 109 s−1 .
b) Determine the displacement current density, Jd (z, t):

∂D
Jd (z, t) = = −0 ω(25ax − 30ay ) sin(ωt − 50z)
∂t
= (−3.32ax + 3.98ay ) sin(1.5 × 1010 t − 50z) A/m2

c) Find the total magnetic flux passing through the rectangle defined by 0 < x < 1, y = 0,
0 < z < 1, at t = 0: In free space, the magnetic field of the uniform plane wave can be easily
found using the intrinsic impedance:
 
25 30
H(z, t) = ay + ax cos(ωt − 50z) A/m
η0 η0

Then B(z, t) = µ0 H(z, t) = (1/c)(25ay + 30ax ) cos(ωt − 50z) Wb/m2 , where µ0 /η0 =
√
µ0 0 = 1/c. The flux at t = 0 is now
 1 1  1 25 25
= B · ay dx dz = cos(50z) dz = sin(50) = −0.44 nWb
0 0 0 c 50(3 × 108 )

11.7. The phasor magnetic field intensity for a 400-MHz uniform plane wave propagating in a certain lossless
material is (2ay − j 5az )e−j 25x A/m. Knowing that the maximum amplitude of E is 1500 V/m, find β,
η, λ, vp , R , µR , and H(x, y, z, t): First, from the phasor expression, we identify β = −1
√ √25 m from
√
the
∗
argument of the exponential√function. Next, we evaluate H0 = |H| = H · H = 2 + 5 = 29. 2 2
Then η = E0 /H0 = 1500/ 29 = 278.5
. Then λ = 2π/β = 2π/25 = .25 m = 25 cm. Next,

ω 2π × 400 × 106
vp = = = 1.01 × 108 m/s
β 25

Now we note that

µR µR
η = 278.5 = 377 ⇒ = 0.546
R R
And c
vp = 1.01 × 108 = √ ⇒ µR R = 8.79
µR R
We solve the above two equations simultaneously to find R = 4.01 and µR = 2.19. Finally,


H(x, y, z, t) = Re (2ay − j 5az )e−j 25x ej ωt
= 2 cos(2π × 400 × 106 t − 25x)ay + 5 sin(2π × 400 × 106 t − 25x)az
= 2 cos(8π × 108 t − 25x)ay + 5 sin(8π × 108 t − 25x)az A/m

184
11.8. Let the fields, E(z, t) = 1800 cos(107 πt − βz)ax V/m and H(z, t) = 3.8 cos(107 πt − βz)ay A/m,
represent a uniform plane wave propagating at a velocity of 1.4 × 108 m/s in a perfect dielectric. Find:
a) β = ω/v = (107 π)/(1.4 × 108 ) = 0.224 m−1 .
b) λ = 2π/β = 2π/.224 = 28.0 m.
c) η = |E|/|H| = 1800/3.8 = 474
.
√ √
d) µR : Have two equations in the two unknowns, µR and R : η = η0 µR /R and β = ω µR R /c.
Eliminate R to find
 2  2
βcη (.224)(3 × 108 )(474)
µR = = = 2.69
ωη0 (107 π)(377)

e) R = µR (η0 /η)2 = (2.69)(377/474)2 = 1.70.

11.9. A certain lossless material has µR = 4 and R = 9. A 10-MHz uniform plane wave is propagating in
the ay direction with Ex0 = 400 V/m and Ey0 = Ez0 = 0 at P (0.6, 0.6, 0.6) at t = 60 ns.
a) Find β, λ, vp , and η: For a uniform plane wave,

√ ω√ 2π × 107

β = ω µ = µR R = (4)(9) = 0.4π rad/m
c 3 × 108

Then λ = (2π)/β = (2π)/(0.4π) = 5 m. Next,

ω 2π × 107
vp = = = 5 × 107 m/s
β 4π × 10−1

Finally,

µ µR 4
η= = η0 = 377 = 251

 R 9

b) Find E(t) (at P ): We are given the amplitude at t = 60 ns and at y = 0.6 m. Let the maximum
amplitude be Emax , so that in general, Ex = Emax cos(ωt − βy). At the given position and time,

Ex = 400 = Emax cos[(2π × 107 )(60 × 10−9 ) − (4π × 10−1 )(0.6)] = Emax cos(0.96π )
= −0.99Emax

So Emax = (400)/(−0.99) = −403 V/m. Thus at P, E(t) = −403 cos(2π × 107 t) V/m.
c) Find H (t): First, we note that if E at a given instant points in the negative x direction, while the
wave propagates in the forward y direction, then H at that same position and time must point in
the positive z direction. Since we have a lossless homogeneous medium, η is real, and we are
allowed to write H (t) = E(t)/η, where η is treated as negative and real. Thus

Ex (t) −403
H (t) = Hz (t) = = cos(2π × 10−7 t) = 1.61 cos(2π × 10−7 t) A/m
η −251

185
11.10. Given a 20MHz uniform plane wave with Hs = (6ax − j 2ay )e−j z A/m, assume propagation in a
lossless medium characterized by R = 5 and an unknown µR .
a) Find λ, vp , µR , and η: First, β = 1, so λ = 2π/β = 2π m. Next, vp = ω/β = 2π × 20 × 106 =
4π × 107 m/s. Then, µR = (β 2 c2 )/(ω2 R ) = (3 × 108 )2 /(4π × 107 )2 (5) = 1.14.
√ √
Finally, η = η0 µR /R = 377 1.14/5 = 180.
b) Determine E at the origin at t = 20ns: We use the relation |E| = η|H| and note that for positive z
propagation, a positive x component of H is coupled to a negative y component of E, and a negative
y component of H iscoupledto a negative x component of E. We obtain Es = −η(6ay +j 2ax )e−j z .
Then E(z, t) = Re Es ej ωt = −6η cos(ωt − z)ay + 2η sin(ωt − z)ax = 360 sin(ωt − z)ax −
1080 cos(ωt − z)ay . With ω = 4π × 107 sec−1 , t = 2 × 10−8 s, and z = 0, E evaluates as
E(0, 20ns) = 360(0.588)ax − 1080(−0.809)ay = 212ax + 874ay V/m.

11.11. A 2-GHz uniform plane wave has an amplitude of Ey0 = 1.4 kV/m at (0, 0, 0, t = 0) and is propagating
in the az direction in a medium where   = 1.6×10−11 F/m,   = 3.0×10−11 F/m, and µ = 2.5 µH/m.
Find:
a) Ey at P (0, 0, 1.8cm) at 0.2 ns: To begin, we have the ratio,   /  = 1.6/3.0 = 0.533. So
 1/2

  2
µ  
α=ω 1+ − 1
2 

(2.5 × 10−6 )(3.0 × 10−11 ) 
1/2
= (2π × 2 × 109 ) 1 + (.533)2 − 1 = 28.1 Np/m
2
Then  1/2
 2
µ   1+  
β=ω + 1 = 112 rad/m
2 

Thus in general,
Ey (z, t) = 1.4e−28.1z cos(4π × 109 t − 112z) kV/m
Evaluating this at t = 0.2 ns and z = 1.8 cm, find
Ey (1.8 cm, 0.2 ns) = 0.74 kV/m

b) Hx at P at 0.2 ns: We use the phasor relation, Hxs = −Eys /η where


µ 1 2.5 × 10−6 1
η= 

= −11
√ = 263 + j 65.7 = 271 14◦


 1 − j ( / )  3.0 × 10 1 − j (.533)
So now
Eys (1.4 × 103 )e−28.1z e−j 112z ◦
Hxs = − =− j 14 ◦ = −5.16e−28.1z e−j 112z e−j 14 A/m
η 271e
Then
Hx (z, t) = −5.16e−28.1z cos(4π × 10−9 t − 112z − 14◦ )
This, when evaluated at t = 0.2 ns and z = 1.8 cm, yields
Hx (1.8 cm, 0.2 ns) = −3.0 A/m

186
11.12. The plane wave Es = 300e−j kx ay V/m is propagating in a material for which µ = 2.25 µH/m,   = 9
pF/m, and   = 7.8 pF/m. If ω = 64 Mrad/s, find:
a) α: We use the general formula, Eq. (35):
 1/2
 2
µ   1+  
α=ω − 1
2 

(2.25 × 10−6 )(9 × 10−12 ) 
1/2
= (64 × 106 ) 1 + (.867)2 − 1 = 0.116 Np/m
2

b) β: Using (36), we write

 1/2
 2
µ   1+  
β=ω + 1 = .311 rad/m
2 

c) vp = ω/β = (64 × 106 )/(.311) = 2.06 × 108 m/s.

d) λ = 2π/β = 2π/(.311) = 20.2 m.
e) η: Using (39):

µ 1 2.25 × 10−6 1
η= 

= −12
√ = 407 + j 152 = 434.5ej.36

 1 − j (  /  ) 9 × 10 1 − j (.867)

f) Hs : With Es in the positive y direction (at a given time) and propagating in the positive x direction,
we would have a positive z component of Hs , at the same time. We write (with j k = α + jβ):
Es 300
Hs = az = e−j kx az = 0.69e−αx e−jβx e−j.36 az
η 434.5ej.36
= 0.69e−.116x e−j.311x e−j.36 az A/m

g) E(3, 2, 4, 10ns): The real instantaneous form of E will be


E(x, y, z, t) = Re Es ej ωt = 300e−αx cos(ωt − βx)ay

Therefore

E(3, 2, 4, 10ns) = 300e−.116(3) cos[(64 × 106 )(10−8 ) − .311(3)]ay = 203 V/m

11.13. Let j k = 0.2 + j 1.5 m−1 and η = 450 + j 60

for a uniform plane wave propagating in the az
direction. If ω = 300 Mrad/s, find µ,   , and   : We begin with

µ 1
η= 

= 450 + j 60
 1 − j (  /  )

and


j k = j ω µ  1 − j (  /  ) = 0.2 + j 1.5

187
11.13. (continued) Then
µ 1
ηη∗ = 

= (450 + j 60)(450 − j 60) = 2.06 × 105 (1)
 1 + (  /  )2
and 
(j k)(j k)∗ = ω2 µ  1 + (  /  )2 = (0.2 + j 1.5)(0.2 − j 1.5) = 2.29 (2)
Taking the ratio of (2) to (1),
(j k)(j k)∗   2.29
2  2   2
= ω ( ) 1 + ( / ) = = 1.11 × 10−5
ηη∗ 2.06 × 10 5

Then with ω = 3 × 108 ,

1.11 × 10−5 1.23 × 10−22
(  )2 =  =  (3)
(3 × 108 )2 1 + (  /  )2 1 + (  /  )2
Now, we use Eqs. (35) and (36). Squaring these and taking their ratio gives


α2 1 + (  /  )2 (0.2)2
=
=
β2 1 + (  /  )2 (1.5)2

We solve this to find   /  = 0.271. Substituting this result into (3) gives   = 1.07 × 10−11 F/m.
Since   /  = 0.271, we then find   = 2.90 × 10−12 F/m. Finally, using these results in either (1) or
(2) we find µ = 2.28 × 10−6 H/m. Summary: µ = 2.28 × 10−6 H/m,
  = 1.07 × 10−11 F/m, and   = 2.90 × 10−12 F/m.

11.14. A certain nonmagnetic material has the material constants R = 2 and   /  = 4 × 10−4 at ω = 1.5
Grad/s. Find the distance a uniform plane wave can propagate through the material before:
a) it is attenuated by 1 Np: First,   = (4 × 104 )(2)(8.854 × 10−12 ) = 7.1 × 10−15 F/m. Then,
since   /  << 1, we use the approximate form for α, given by Eq. (51) (written in terms of   ):

. ω  µ (1.5 × 109 )(7.1 × 10−15 ) 377
α= = √ = 1.42 × 10−3 Np/m
2  2 2
The required distance is now z1 = (1.42 × 10−3 )−1 = 706 m
b) the power level is reduced by one-half: The governing relation is e−2αz1/2 = 1/2, or z1/2 =
ln 2/2α = ln 2/2(1.42 × 10− 3) = 244 m.
c) the phase shifts ◦ wavelength, where λ = 2π/β
 360 : This distance is defined as one
√

= (2πc)/(ω R ) = [2π(3 × 10 )]/[(1.5 × 10 ) 2] = 0.89 m.
8 9

11.15. A 10 GHz radar signal may be represented as a uniform plane wave in a sufficiently small region.
Calculate the wavelength in centimeters and the attenuation in nepers per meter if the wave is propagating
in a non-magnetic material for which
a) R = 1 and R = 0: In a non-magnetic material, we would have:
  1/2
  2
µ0 0 R R
α=ω  1+ − 1
2 R

188
11.15. (continued) and
  1/2
  2
µ0 0 R R
β=ω  1+ + 1
2 R
√
With the given values of R and R , it is clear that β = ω µ0 0 = ω/c, and so

λ = 2π/β = 2πc/ω = 3 × 1010 /1010 = 3 cm. It is also clear that α = 0.


.
b) R
= 1.04 and R
= 9.00 × 10−4 :
In this case R /R << 1, and so β = ω R /c = 2.13 cm−1 .
Thus λ = 2π/β = 2.95 cm. Then
√
. ω  µ ωR µ0 0 ω R 2π × 1010 (9.00 × 10−4 )
α= =  =  = √
2  2 R 2c   2 × 3 × 108 1.04
R

= 9.24 × 10−2 Np/m

c) R = 2.5 and R = 7.2: Using the above formulas, we obtain

√  1/2
 2
2π × 1010
2.5 7.2
β= √  1+ + 1 = 4.71 cm−1
(3 × 10 ) 2
10 2.5

and so λ = 2π/β = 1.33 cm. Then

√  1/2
 2
2π × 10102.5 7.2
α= √  1+ − 1 = 335 Np/m
(3 × 10 ) 2
8 2.5

11.16. The power factor of a capacitor is defined as the cosine of the impedance phase angle, and its Q is
ωCR, where R is the parallel resistance. Assume an idealized parallel plate capacitor having a dielecric
characterized by σ ,   , and µR . Find both the power factor and Q in terms of the loss tangent: First,
the impedance will be:
 
1
R j ωC 1 − j RωC 1 − jQ
Z=   =R =R
R+ 1 1 + (RωC) 2 1 + Q2
j ωC

Now R = d/(σ A) and C =   A/d, and so Q = ω  /σ = 1/ l.t. Then the power factor is P.F =


cos[tan−1 (−Q)] = 1/ 1 + Q2 .

189
11.17. Let η = 250 + j 30
and j k = 0.2 + j 2 m−1 for a uniform plane wave propagating in the az direction
in a dielectric having some finite conductivity. If |Es | = 400 V/m at z = 0, find:
a) Pz,av at z = 0 and z = 60 cm: Assume x-polarization for the electric field. Then
 
1  ∗
 1 −αz −jβz 400 −αz jβz
Pz,av = Re Es × Hs = Re 400e e ax × ∗ e e ay
2 2 η
   
1 2 −2αz 1 4 −2(0.2)z 1
= (400) e Re ∗ az = 8.0 × 10 e Re az
2 η 250 − j 30
= 315 e−2(0.2)z az W/m2

Evaluating at z = 0, obtain Pz,av (z = 0) = 315 az W/m2 ,

and at z = 60 cm, Pz,av (z = 0.6) = 315e−2(0.2)(0.6) az = 248 az W/m2 .
b) the average ohmic power dissipation in watts per cubic meter at z = 60 cm: At this point a flaw
becomes evident in the problem statement, since solving this part in two different ways gives
results that are not the same. I will demonstrate: In the first method, we use Poynting’s theorem
in point form (first equation at the top of p. 366), which we modify for the case of time-average
fields to read:
−∇ · Pz,av =< J · E >
where the right hand side is the average power dissipation per volume. Note that the additional
right-hand-side terms in Poynting’s theorem that describe changes in energy stored in the fields
will both be zero in steady state. We apply our equation to the result of part a:

d
< J · E >= −∇ · Pz,av = − 315 e−2(0.2)z = (0.4)(315)e−2(0.2)z = 126e−0.4z W/m3
dz

At z = 60 cm, this becomes < J · E >= 99.1 W/m3 . In the second method, we solve for the
conductivity and evaluate < J · E >= σ < E 2 >. We use



j k = j ω µ  1 − j (  /  )

and
µ 1
η=

  1 − j (  /  )
We take the ratio,    
jk  
= j ω 1 − j = j ω  + ω 
η 
Identifying σ = ω  , we find
   
jk 0.2 + j 2
σ = Re = Re = 1.74 × 10−3 S/m
η 250 + j 30

Now we find the dissipated power per volume:

  2
1
σ < E 2 >= 1.74 × 10−3 400e−0.2z
2

190
11.17b. (continued) At z = 60 cm, this evaluates as 109 W/m3 . One can show that consistency between the
two methods requires that  
1 σ
Re ∗ =
η 2α
This relation does not hold using the numbers as given in the problem statement and the value of σ
found above. Note that in Problem 11.13, where all values are worked out, the relation does hold and
consistent results are obtained using both methods.

11.18a. Find P (r, t) if Es = 400e−j 2x ay V/m in free space: A positive y component of E requires a posi-
tive z component of H for propagation in the forward x direction. Thus Hs = (400/η0 )e−j 2x az =
1.06e−j 2x az A/m. In real form, the field are E(x, t) = 400 cos(ωt −2x)ay and H(x, t) = 1.06 cos(ωt −
2x)az . Now P (r, t) = P (x, t) = E(x, t) × H(x, t) = 424.4 cos2 (ωt − 2x)ax W/m2 .
b) Find P at t = 0 for r = (a, 5, 10), where a = 0,1,2, and 3: At t = 0, we find from part a,
P (a, 0) = 424.4 cos2 (2a), which leads to the values (in W/m2 ): 424.4 at a = 0, 73.5 at a = 1,
181.3 at a = 2, and 391.3 at a = 3.
c) Find P at the origin for T = 0, 0.2T , 0.4T , and 0.6T , where T is the oscillation period. At
the origin, we have P (0, t) = 424.4 cos2 (ωt) = 424.4 cos2 (2πt/T ). Using this, we obtain
the following values (in W/m2 ): 424.4 at t = 0, 42.4 at t = 0.2T , 277.8 at t = 0.4T , and
277.8 at t = 0.6T .

11.19. Perfectly-conducting cylinders with radii of 8 mm and 20 mm are coaxial. The region between the
cylinders is filled with a perfect dielectric for which  = 10−9 /4π F/m and µR = 1. If E in this region
is (500/ρ) cos(ωt − 4z)aρ V/m, find:
a) ω, with the help of Maxwell’s equations in cylindrical coordinates: We use the two curl equations,
beginning with ∇ × E = −∂B/∂t, where in this case,
∂Eρ 2000 ∂Bφ
∇ ×E= aφ = sin(ωt − 4z)aφ = − aφ
∂z ρ ∂t
So 
2000 2000
Bφ = sin(ωt − 4z)dt = cos(ωt − 4z) T
ρ ωρ
Then
Bφ 2000
Hφ = = cos(ωt − 4z) A/m
µ0 (4π × 10−7 )ωρ
We next use ∇ × H = ∂D/∂t, where in this case
∂Hφ 1 ∂(ρHφ )
∇ ×H=− aρ + az
∂z ρ ∂ρ
where the second term on the right hand side becomes zero when substituting our Hφ . So
∂Hφ 8000 ∂Dρ
∇ ×H=− aρ = − sin(ωt − 4z)aρ = aρ
∂z (4π × 10−7 )ωρ ∂t
And

8000 8000
Dρ = − −7
sin(ωt − 4z)dt = cos(ωt − 4z) C/m2
(4π × 10 )ωρ (4π × 10−7 )ω2 ρ

191
11.19a. (continued) Finally, using the given ,

Dρ 8000
Eρ = = −16
cos(ωt − 4z) V/m
 (10 )ω2 ρ

This must be the same as the given field, so we require

8000 500
= ⇒ ω = 4 × 108 rad/s
(10−16 )ω2 ρ ρ

b) H(ρ, z, t): From part a, we have

2000 4.0
H(ρ, z, t) = cos(ωt − 4z)aφ = cos(4 × 108 t − 4z)aφ A/m
(4π × 10−7 )ωρ ρ

c) P(ρ, φ, z): This will be

500 4.0
P(ρ, φ, z) = E × H = cos(4 × 108 t − 4z)aρ × cos(4 × 108 t − 4z)aφ
ρ ρ
2.0 × 10−3
= 2
cos2 (4 × 108 t − 4z)az W/m2
ρ

d) the average power passing through every cross-section 8 < ρ < 20 mm, 0 < φ < 2π . Using
the result of part c, we find Pavg = (1.0 × 103 )/ρ 2 az W/m2 . The power through the given
cross-section is now
 2π  .020  
1.0 × 103 20
P= 2
ρ dρ dφ = 2π × 10 ln
3
= 5.7 kW
0 .008 ρ 8

11.20. If Es = (60/r) sin θ e−j 2r aθ V/m, and Hs = (1/4πr) sin θ e−j 2r aφ A/m in free space, find the average
power passing outward through the surface r = 106 , 0 < θ < π/3, and 0 < φ < 2π.

1   15 sin2 θ
Pavg = Re Es × Hs∗ = ar W/m2
2 2πr 2
Then, the requested power will be
   π/3
15 sin2 θ
2π π/3
= 2
ar · ar r sin θdθdφ = 15
2
sin3 θ dθ
0 2πr
 0  0
1 π/3 25
= 15 − cos θ (sin θ + 2) 
2
= = 3.13 W
3 0 8

Note that the radial distance at the surface, r = 106 m, makes no difference, since the power density
dimishes as 1/r 2 .

192
11.21. The cylindrical shell, 1 cm < ρ < 1.2 cm, is composed of a conducting material for which σ = 106
S/m. The external and internal regions are non-conducting. Let Hφ = 2000 A/m at ρ = 1.2 cm.
a) Find H everywhere: Use Ampere’s circuital law, which states:

H · dL = 2πρ(2000) = 2π(1.2 × 10−2 )(2000) = 48π A = Iencl

Then in this case

I 48
J= az = az = 1.09 × 106 az A/m2
Area (1.44 − 1.00) × 10−4

With this result we again use Ampere’s circuital law to find H everywhere within the shell as a
function of ρ (in meters):
 2π  ρ
1 54.5 4 2
Hφ1 (ρ) = 1.09 × 106 ρ dρ dφ = (10 ρ − 1) A/m (.01 < ρ < .012)
2πρ 0 .01 ρ

Outside the shell, we would have

48π
Hφ2 (ρ) = = 24/ρ A/m (ρ > .012)
2πρ

Inside the shell (ρ < .01 m), Hφ = 0 since there is no enclosed current.
b) Find E everywhere: We use

J 1.09 × 106
E= = az = 1.09 az V/m
σ 106
which is valid, presumeably, outside as well as inside the shell.
c) Find P everywhere: Use

54.5 4 2
P = E × H = 1.09 az × (10 ρ − 1) aφ
ρ
59.4
=− (104 ρ 2 − 1) aρ W/m2 (.01 < ρ < .012 m)
ρ

Outside the shell,

24 26
P = 1.09 az × aφ = − aρ W/m2 (ρ > .012 m)
ρ ρ

193
11.22. The inner and outer dimensions of a copper coaxial transmission line are 2 and 7 mm, respectively.
Both conductors have thicknesses much greater than δ. The dielectric is lossless and the operating
frequency is 400 MHz. Calculate the resistance per meter length of the:
a) inner conductor: First

1 1
δ=√ =
= 3.3 × 10−6 m = 3.3µm
πf µσ π(4 × 108 )(4π × 10−7 )(5.8 × 107 )

Now, using (70) with a unit length, we find

1 1
Rin = = = 0.42 ohms/m
2πaσ δ 2π(2 × 10 )(5.8 × 107 )(3.3 × 10−6 )
−3

b) outer conductor: Again, (70) applies but with a different conductor radius. Thus

a 2
Rout = Rin = (0.42) = 0.12 ohms/m
b 7

c) transmission line: Since the two resistances found above are in series, the line resistance is their
sum, or R = Rin + Rout = 0.54 ohms/m.

11.23. A hollow tubular conductor is constructed from a type of brass having a conductivity of 1.2 × 107 S/m.
The inner and outer radii are 9 mm and 10 mm respectively. Calculate the resistance per meter length
at a frequency of
a) dc: In this case the current density is uniform over the entire tube cross-section. We write:

L 1
R(dc) = = = 1.4 × 10−3
/m
σA (1.2 × 10 )π(.012 − .0092 )
7

b) 20 MHz: Now the skin effect will limit the effective cross-section. At 20 MHz, the skin depth is

δ(20MHz) = [πf µ0 σ ]−1/2 = [π(20 × 106 )(4π × 10−7 )(1.2 × 107 )]−1/2 = 3.25 × 10−5 m

This is much less than the outer radius of the tube. Therefore we can approximate the resistance
using the formula:

L 1 1
R(20MHz) = = = = 4.1 × 10−2
/m
σA 2πbδ (1.2 × 10 )(2π(.01))(3.25 × 10−5 )
7

c) 2 GHz: Using the same formula as in part b, we find the skin depth at 2 GHz to be δ = 3.25 × 10−6
m. The resistance (using the other formula) is R(2GHz) = 4.1 × 10−1
/m.

194
11.24a. Most microwave ovens operate at 2.45 GHz. Assume that σ = 1.2 × 106 S/m and µR = 500 for the
stainless steel interior, and find the depth of penetration:

1 1
δ=√ =
= 9.28 × 10−6 m = 9.28µm
πf µσ 9 −7
π(2.45 × 10 )(4π × 10 )(1.2 × 10 )
6

b) Let Es = 50 0◦ V/m at the surface of the conductor, and plot a curve of the amplitude of Es vs.
the angle of Es as the field √
propagates into the stainless steel: Since the conductivity is high, we
. .
use (62) to write α = β = πf µσ = 1/δ. So, assuming that the direction into the conductor is
z, the depth-dependent field is written as

Es (z) = 50e−αz e−jβz = 50e−z/δ e−j z/δ = 50 exp(−z/9.28) exp(−j z/9.28)

     
amplitude angle

where z is in microns. Therefore, the plot of amplitude versus angle is simply a plot of e−x versus
x, where x = z/9.28; the starting amplitude is 50 and the 1/e amplitude (at z = 9.28 µm) is 18.4.

11.25. A good conductor is planar in form and carries a uniform plane wave that has a wavelength of 0.3 mm
and a velocity of 3 × 105 m/s. Assuming the conductor is non-magnetic, determine the frequency and
the conductivity: First, we use

v 3 × 105
f = = = 109 Hz = 1 GHz
λ 3 × 10−4

Next, for a good conductor,

λ 1 4π 4π
δ= =√ ⇒ σ = = = 1.1 × 105 S/m
2π πf µσ λ2 f µ (9 × 10−8 )(109 )(4π × 10−7 )

11.26. The dimensions of a certain coaxial transmission line are a = 0.8mm and b = 4mm. The outer
conductor thickness is 0.6mm, and all conductors have σ = 1.6 × 107 S/m.
a) Find R, the resistance per unit length, at an operating frequency of 2.4 GHz: First

1 1
δ=√ =
= 2.57 × 10−6 m = 2.57µm
πf µσ 8 −7
π(2.4 × 10 )(4π × 10 )(1.6 × 10 )
7

Then, using (70) with a unit length, we find

1 1
Rin = = = 4.84 ohms/m
2πaσ δ 2π(0.8 × 10−3 )(1.6 × 107 )(2.57 × 10−6 )

The outer conductor resistance is then found from the inner through

a 0.8
Rout = Rin = (4.84) = 0.97 ohms/m
b 4
The net resistance per length is then the sum, R = Rin + Rout = 5.81 ohms/m.

195
11.26b. Use information from Secs. 5.10 and 9.10 to find C and L, the capacitance and inductance per unit
length, respectively. The coax is air-filled. From those sections, we find (in free space)
2π0 2π(8.854 × 10−12 )
C= = = 3.46 × 10−11 F/m
ln(b/a) ln(4/.8)
µ0 4π × 10−7
L= ln(b/a) = ln(4/.8) = 3.22 × 10−7 H/m
2π 2π
√
c) Find α and β if α + jβ = j ωC(R + j ωL): Taking real and imaginary parts of the given
expression, we find
 1/2


 ω√LC 
R
2
α = Re j ωC(R + j ωL) = √  1+ − 1
2 ωL

and  1/2


 ω√LC  2
β = Im j ωC(R + j ωL) = √  1+ R + 1
2 ωL
√  √
These can be found by writing out α = Re j ωC(R + j ωL) = (1/2) j ωC(R + j ωL)+c.c.,
where c.c denotes the complex conjugate. The result is squared, terms collected, and the square root
taken. Now, using the values of R, C, and L found in parts a and b, we find α = 3.0 × 10−2 Np/m
and β = 50.3 rad/m.

11.27. The planar surface at z = 0 is a brass-Teflon interface. Use data available in Appendix C to evaluate
the following ratios for a uniform plane wave having ω = 4 × 1010 rad/s:
a) αTef /αbrass : From the appendix we find   /  = .0003 for Teflon, making the material a good
dielectric. Also, for Teflon, R = 2.1. For brass, we find σ = 1.5 × 107 S/m, making brass a good
conductor at the stated frequency. For a good dielectric (Teflon) we use the approximations:
    
 
. σ µ  1 
1   ω  
α= = ω µ = R
2   2 2  c
  
.
 1   . √ ω 
β = ω µ 1 + = ω µ = R
8  c
For brass (good conductor) we have
  
. .
1
α = β = πf µσbrass = π (4 × 1010 )(4π × 10−7 )(1.5 × 107 ) = 6.14 × 105 m−1
2π
Now
  
1/2   /  (ω/c) R √
αTef (1/2)(.0003)(4 × 1010 /3 × 108 ) 2.1
= √ = = 4.7 × 10−8
αbrass πf µσbrass 6.14 × 105

b)
√
λTef (2π/βTef ) βbrass c πf µσbrass (3 × 108 )(6.14 × 105 )
= = =  = √ = 3.2 × 103
λbrass (2π/βbrass ) βTef 
ω R Tef (4 × 10 10 ) 2.1

196
11.27. (continued)

c)
vTef (ω/βTef ) βbrass
= = = 3.2 × 103 as before
vbrass (ω/βbrass ) βTef

11.28. A uniform plane wave in free space has electric field given by Es = 10e−jβx az + 15e−jβx ay V/m.
a) Describe the wave polarization: Since the two components have a fixed phase difference (in this
case zero) with respect to time and position, the wave has linear polarization, with the field vector
in the yz plane at angle φ = tan−1 (10/15) = 33.7◦ to the y axis.
b) Find Hs : With propagation in forward x, we would have

−10 −jβx 15 −jβx

Hs = e ay + e az A/m = −26.5e−jβx ay + 39.8e−jβx az mA/m
377 377

c) determine the average power density in the wave in W/m2 : Use


1  ∗
 1 (10)2 (15)2
Pavg = Re Es × Hs = ax + ax = 0.43ax W/m2 or Pavg = 0.43 W/m2
2 2 377 377

11.29. Consider a left-circularly polarized wave in free space that propagates in the forward z direction. The
electric field is given by the appropriate form of Eq. (80).
a) Determine the magnetic field phasor, Hs :
We begin, using (80), with Es = E0 (ax + j ay )e−jβz . We find the two components of Hs
separately, using the two components of Es . Specifically, the x component of Es is associated
with a y component of Hs , and the y component of Es is associated with a negative x component
of Hs . The result is
E0  
Hs = ay − j ax e−jβz
η0

b) Determine an expression for the average power density in the wave in W/m2 by direct application
of Eq. (57): We have
 
1 ∗ 1 −jβz E0 +jβz
Pz,avg = Re(Es × Hs ) = Re E0 (ax + j ay )e × (ay − j ax )e
2 2 η0
E02
= az W/m2 (assuming E0 is real)
η0

197
11.30. The electric field of a uniform plane wave in free space is given by Es = 10(ay + j az )e−j 25x .
a) Determine the frequency, f : Use

βc (25)(3 × 108 )
f = = = 1.2 GHz
2π 2π

b) Find the magnetic field phasor, Hs : With the Poynting vector in the positive x direction, a positive
y component for E requires a positive z component for H. Similarly, a positive z component for
E requires a negative y component for H. Therefore,

10 !
Hs = az − j ay e−j 25x
η0

c) Describe the polarization of the wave: This is most clearly seen by first converting the given field
to real instantaneous form:

 !
E(x, t) = Re Es ej ωt = 10 cos(ωt − 25x)ay − sin(ωt − 25x)az

At x = 0, this becomes, !
E(0, t) = 10 cos(ωt)ay − sin(ωt)az
With the wave traveling in the forward x direction, we recognize the polarization as left circular.

11.31. A linearly-polarized uniform plane wave, propagating in the forward z direction, is input to a lossless
anisotropic material, in which the dielectric constant encountered by waves polarized along y (Ry )
differs from that seen by waves polarized along x (Rx ). Suppose Rx = 2.15, Ry = 2.10, and the
wave electric field at input is polarized at 45◦ to the positive x and y axes. Assume free space wavelength
λ.
a) Determine the shortest length of the material such that the wave as it emerges from the output end
is circularly polarized: With the input field at 45◦ , the x and y components are of equal magnitude,
and circular polarization will result if the phase difference between the components is π/2. Our
requirement over length L is thus βx L − βy L = π/2, or

π πc
L= = √ √
2(βx − βy ) 2ω( Rx − Ry )

With the given values, we find,

(58.3)πc λ
L= = 58.3 = 14.6 λ
2ω 4

b) Will the output wave be right- or left-circularly-polarized? With the dielectric constant greater for
x-polarized waves, the x component will lag the y component in time at the output. The field can
thus be written as E = E0 (ay − j ax ), which is left circular polarization.

198
11.32. Suppose that the length of the medium of Problem 11.31 is made to be twice that as determined in
the problem. Describe the polarization of the output wave in this case: With the length doubled, a
phase shift of π radians develops between the two components. At the input, we can write the field as
Es (0) = E0 (ax + ay ). After propagating through length L, we would have,

Es (L) = E0 [e−jβx L ax + e−jβy L ay ] = E0 e−jβx L [ax + e−j (βy −βx )L ay ]

where (βy − βx )L = −π (since βx > βy ), and so Es (L) = E0 e−jβx L [ax − ay ]. With the reversal of
the y component, the wave polarization is rotated by 90◦ , but is still linear polarization.

11.33. Given a wave for which Es = 15e−jβz ax + 18e−jβz ej φ ay V/m, propagating in a medium characterized
by complex intrinsic impedance, η.
a) Find Hs : With the wave propagating in the forward z direction, we find:

1 
Hs = −18ej φ ax + 15ay e−jβz A/m
η

b) Determine the average power density in W/m2 : We find

   
1  ∗
 1 (15)2 (18)2 1
Pz,avg = Re Es × Hs = Re ∗
+ ∗ = 275 Re ∗ W/m2
2 2 η η η

11.34. Given the general elliptically-polarized wave as per Eq. (73):

Es = [Ex0 ax + Ey0 ej φ ay ]e−jβz

a) Show, using methods similar to those of Example 11.7, that a linearly polarized wave results when
superimposing the given field and a phase-shifted field of the form:

Es = [Ex0 ax + Ey0 e−j φ ay ]e−jβz ej δ

where δ is a constant: Adding the two fields gives

     
Es,tot = Ex0 1 + ej δ ax + Ey0 ej φ + e−j φ ej δ ay e−jβz
 
     
= E
 x0 e j δ/2
e −j δ/2
+ e j δ/2
ax + E y0 e j δ/2
e −j δ/2 j φ
e + e −j φ j δ/2
e ay 
e
−jβz
     
2 cos(δ/2) 2 cos(φ−δ/2)

!
This simplifies to Es,tot = 2 Ex0 cos(δ/2)ax + Ey0 cos(φ − δ/2)ay ej δ/2 e−jβz , which is lin-
early polarized.
b) Find δ in terms of φ such that the resultant wave is polarized along x: By inspecting the part a
result, we achieve a zero y component when 2φ − δ = π (or odd multiples of π).

199
 CHAPTER 12

+ +
12.1. A uniform plane wave in air, Ex1 = Ex10 cos(1010 t −βz) V/m, is normally-incident on a copper surface
at z = 0. What percentage of the incident power density is transmitted into the copper? We need to
find the reflection coefficient. The intrinsic impedance of copper (a good conductor) is



j ωµ ωµ 1010 (4π × 107 )
ηc = = (1 + j ) = (1 + j ) = (1 + j )(.0104)
σ 2σ 2(5.8 × 107 )

Note that the accuracy here is questionable, since we know the conductivity to only two significant
figures. We nevertheless proceed: Using η0 = 376.7288 ohms, we write

ηc − η0 .0104 − 376.7288 + j.0104

= = = −.9999 + j.0001
ηc + η0 .0104 + 376.7288 + j.0104

Now ||2 = .9999, and so the transmitted power fraction is 1 − ||2 = .0001, or about 0.01% is
transmitted.

= 1, µ = µ ,
12.2. The plane y = 0 defines the boundary between two different dielectrics. For y < 0, R1 1 0


= 0; and for y > 0, 
= 5, µ = µ , and 

= 0. Let E + = 150 cos(ωt − 8y) V/m, and
and R1 R2 2 0 R2 z1
find
a) ω: Have β = 8 = ω/c ⇒ ω = 8c = 2.4 × 109 sec−1 .
b) H1+ : With E in the z direction, and propagation in the forward y direction, H will lie in the positive
x direction, and its amplitude will be Hx = Ey /η0 in region 1.
Thus H1+ = (150/η0 ) cos(ωt − 8y)ax = 0.40 cos(2.4 × 109 t − 8y)ax A/m.

c) H1− : First,
√ √
− + η0 / 5 − η0 /1 1− 5 + +
Ez1 = Ez1 = √ = √ Ez1 = −0.38Ez1
η0 / 5 + η0 /1 1+ 5
Then
− + 0.38(150)
Hx1 = +(0.38/η0 )Ez1 = cos(ωt + 8y)
377
−
So finally, Hx1 = 0.15 cos(2.4 × 109 t + 8y)ax A/m.

12.3. A uniform plane wave in region 1 is normally-incident on the planar boundary separating regions 1 and
2. If 1

= 2

= 0, while R1

= µ3 and 
= µ3 , find the ratio 
/
if 20% of the energy in
R1 R2 R2 R2 R1
the incident wave is reflected at the boundary. There are two possible answers. First, since ||2 = .20,
and since both permittivities and permeabilities are real,  = ±0.447. we then set up
 
η (µ /
)−η
)
(µR1 /R1
η2 − η1 0 R2 R2 0
 = ±0.447 = =  
η2 + η1 η0 (µR2 /R2
)+η

0 (µR1 /R1 )
 
(µR2 /µ3R2 ) − (µR1 /µ3R1 ) µR1 − µR2
=  =
(µ /µ3 ) + (µ /µ3 ) µR1 + µR2
R2 R2 R1 R1

200
12.3. (continued) Therefore
 3
µR2 1 ∓ 0.447 
µR2
=
=
= (0.382, 2.62) ⇒ R2 = (0.056, 17.9)
µR1 1 ± 0.447 R1 µR1

12.4. The magnetic field intensity in a region where 

= 0 is given as H = 5 cos ωt cos βz ay A/m, where
ω = 5 Grad/s and β = 30 rad/m. If the amplitude of the associated electric field intensity is 2kV/m,
find
a) µ and 
for the medium: In phasor form, the magnetic field is Hys = H0 e−jβz + H0 e+βz =
5 cos βz ⇒ H0 = 2.5. The electric field will be x directed, and is Exs = η(2.5)e−jβz −
η(2.5)e+jβz = (2j )η(2.5) sin βz. Giventhe electric field amplitude of 2 kV/m, we write
 2×10 =
3

5η, or η = 400 . Now η = 400 = η0 µr /R
and we also have β = 30 = (ω/c) µR R
. We
solve these two equations simultaneously for µR and R
to find µR = 1.91 and R
= 1.70.
Therefore µ = 1.91 × 4π × 10−7 = 2.40 µH/m and 
= 1.70 × 8.854 × 10−12 = 15.1 pF/m.
b) E: From part a, electric field in phasor form is Exs = j 2 sin βz kV/m, and so, in real form:
E(z, t) = Re(Exs ej ωt )ax = 2 sin βz sin ωt ax kV/m with ω and β as given.

12.5. The region z < 0 is characterized by R
= µR = 1 and R

= 0. The total E field here is given as the
sum of the two uniform plane waves, Es = 150e−j 10z ax + (50 20◦ )ej 10z ax V/m.
a) What is the operating frequency? In free space, β = k0 = 10 = ω/c = ω/3 × 108 . Thus,
ω = 3 × 109 s−1 , or f = ω/2π = 4.7 × 108 Hz.
b) Specify the intrinsic impedance of the region z > 0 that would provide the appropriate reflected
wave: Use ◦
Er 50ej 20 1 ◦ η − η0
= = = ej 20 = 0.31 + j 0.11 =
Einc 150 3 η + η0
Now    
1+ 1 + 0.31 + j 0.11
η = η0 = 377 = 691 + j 177 
1− 1 − 0.31 − j 0.31

c) At what value of z (−10 cm < z < 0) is the total electric field intensity a maximum amplitude?
We found the phase of the reflection coefficient to be φ = 20◦ = .349rad, and we use

−φ −.349
zmax = = = −0.017 m = −1.7 cm
2β 20

12.6. Region 1, z < 0, and region 2, z > 0, are described by the following parameters: 1
= 100 pF/m,
µ1 = 25 µH/m, 1

= 0, 2
= 200 pF/m, µ2 = 50 µH/m, and 2

/2
= 0.5.
If E1+ = 600e−α1 z cos(5 × 1010 t − β1 z)ax V/m, find:
a) α1 : From Eq. (35), Chapter 11, we note that since 1

= 0, it follows that α1 = 0.
 
b) β1 : β1 = ω µ1 1
= (5 × 1010 ) (25 × 10−6 )(100 × 10−12 ) = 2.50 × 103 rad/m.
+
= 600e−j 2.50×10 z ax V/m.
3
c) Es1
−
d) Es1 : To find this, we need to evaluate the reflection coefficient, which means that we first need the
 
two intrinsic impedances. First, η1 = µ1 /1
= (25 × 10−6 )/(100 × 10−12 ) = 500.

201
12.6d) (continued) Next, using Eq. (39), Chapter 11,



µ2 1 50 × 10−6 1
η2 =
 = −10
√ = 460 + j 109
2 1 − j (2

/2
) 2 × 10 1 − j 0.5

Then
η2 − η1 460 + j 109 − 500 ◦
= = = −2.83 × 10−2 + j 1.16 × 10−1 = 0.120ej 104
η2 + η1 460 + j 109 + 500
+
Now we multiply Es1 by  and reverse the propagation direction to obtain

− ◦ 3z
Es1 = 71.8ej 104 ej 2.5×10 V/m

+
e) Es2 : This wave will experience loss in region 2, along with a different phase constant. We need
to evaluate α2 and β2 . First, using Eq. (35), Chapter 11,
  1/2
 
µ2 2
2

2
α2 = ω  1+ − 1
2 2


(50 × 106 )(200 × 10−12 )  1/2
= (5 × 1010 ) 1 + (0.5)2 − 1 = 1.21 × 103 Np/m
2

Then, using Eq. (36), Chapter 11,

  1/2
 
µ2 2
2

2
β2 = ω  1+ + 1 = 5.15 × 103 rad/m
2 2

Then, the transmission coefficient will be

◦
τ = 1 +  = 1 − 2.83 × 10−2 + j 1.16 × 10−1 = 0.972ej 7
+ +
The complex amplitude of Es2 is then found by multiplying the amplitude of Es1 by τ . The field
in region 2 is then constructed by using the resulting amplitude, along with the attenuation and
phase constants that are appropriate for region 2. The result is

+ ◦
= 587e−1.21×10 z ej 7 e−j 5.15×10
3 3z
Es2 V/m

12.7. The semi-infinite regions z < 0 and z > 1 m are free space. For 0 < z < 1 m, R
= 4, µR = 1,
and R

= 0. A uniform plane wave with ω = 4 × 108 rad/s is travelling in the az direction toward the
interface at z = 0.
a) Find the standing wave ratio in each of the three regions: First we find the phase constant in the
middle region, 
ω R
2(4 × 108 )
β2 = = = 2.67 rad/m
c 3 × 108

202
  layer thickness of 1 m, β2 d = 2.67 rad. Also, the intrinsic impedance
12.7a. (continued) Then, with the middle
of the middle layer is η2 = η0 / R
= η0 /2. We now find the input impedance:
 
η0 cos(β2 d) + j η2 sin(β2 d) 377 2 cos(2.67) + j sin(2.67)
ηin = η2 = = 231 + j 141
η2 cos(β2 d) + j η0 sin(β2 d) 2 cos(2.67) + j 2 sin(2.67)

Now, at the first interface,

ηin − η0 231 + j 141 − 377
12 = = = −.176 + j.273 = .325 123◦
ηin + η0 231 + j 141 + 377
The standing wave ratio measured in region 1 is thus

1 + |12 | 1 + 0.325
s1 = = = 1.96
1 − |12 | 1 − 0.325
In region 2 the standing wave ratio is found by considering the reflection coefficient for waves incident
from region 2 on the second interface:
η0 − η0 /2 1 − 1/2 1
23 = = =
η0 + η0 /2 1 + 1/2 3
Then
1 + 1/3
s2 = =2
1 − 1/3
Finally, s3 = 1, since no reflected waves exist in region 3.
b) Find the location of the maximum |E| for z < 0 that is nearest to z = 0. We note that the phase
of 12 is φ = 123◦ = 2.15 rad. Thus
−φ −2.15
zmax = = = −.81 m
2β 2(4/3)

12.8. A wave starts at point a, propagates 100m through a lossy dielectric for which α = 0.5 Np/m, reflects
at normal incidence at a boundary at which  = 0.3 + j 0.4, and then returns to point a. Calculate the
ratio of the final power to the incident power after this round trip: Final power, Pf , and incident power,
Pi , are related through
Pf
Pf = Pi e−2αL ||2 e−2αL ⇒ = |0.3 + j 0.4|2 e−2(0.5)100 = 3.5 × 10−88 (!)
Pi
Try measuring that.

12.9. Region 1, z < 0, and region 2, z > 0, are both perfect dielectrics (µ = µ0 , 

= 0). A uniform plane
wave traveling in the az direction has a radian frequency of 3 × 1010 rad/s. Its wavelengths in the two
regions are λ1 = 5 cm and λ2 = 3 cm. What percentage of the energy incident on the boundary is
a) reflected; We first note that
 2  2

2πc
2πc
R1 = and R2 =
λ1 ω λ2 ω

203

/
= (λ /λ )2 . Then with µ = µ in both regions, we find
12.9a. (continued) Therefore R1 R2 2 1 0
  

−η
η0 1/R2

/
− 1
η2 − η1 0 1/R1 R1 R2 (λ2 /λ1 ) − 1
= =   = =
η2 + η1 η 1/
+ η 1/

/
+ 1 (λ2 /λ1 ) + 1
0 R2 0 R1 R1 R2
λ 2 − λ1 3−5 1
= = =−
λ2 + λ1 3+5 4
The fraction of the incident energy that is reflected is then ||2 = 1/16 = 6.25 × 10−2 .
b) transmitted? We use part a and find the transmitted fraction to be
1 − ||2 = 15/16 = 0.938.
c) What is the standing wave ratio in region 1? Use
1 + || 1 + 1/4 5
s= = = = 1.67
1 − || 1 − 1/4 3

12.10. In Fig. 12.1, let region 2 be free space, while µR1 = 1, R1

= 0, and 
is unknown. Find 
if
R1 R!
− +
a) the amplitude of E1 is one-half that of E1 : Since region 2 is free space, the reflection coefficient
is  
− η − η / 

−1
R1
|E1 | η0 − η1 0 0 R1 1

= + = =  = = ⇒ R1 =9
|E1 | η0 + η1 η0 + η0 / R1


R1 + 1 2
.
− +
b) P1,avg is one-half of P1,avg : This time
 2


 R1 − 1 
  1

||2 =    = ⇒ R1 = 34
 
+ 1  2
 R1 

c) |E1 |min is one-half |E1 |max : Use



−1
R1
|E1 |max 1 + || 1

=s= = 2 ⇒ || =  = =  ⇒ R1 =4
|E1 |min 1 − || 3

R1 + 1

12.11. A 150 MHz uniform plane wave in normally-incident from air onto a material whose intrinsic impedance
is unknown. Measurements yield a standing wave ratio of 3 and the appearance of an electric field
minimum at 0.3 wavelengths in front of the interface. Determine the impedance of the unknown
material: First, the field minimum is used to find the phase of the reflection coefficient, where
1
zmin = − (φ + π) = −0.3λ ⇒ φ = 0.2π
2β
where β = 2π/λ has been used. Next,
s−1 3−1 1
|| = = =
s+1 3+1 2

204
12.11. (continued) So we now have
ηu − η0
 = 0.5ej 0.2π =
ηu + η0
We solve for ηu to find
ηu = η0 (1.70 + j 1.33) = 641 + j 501 

12.12. A 50MHz uniform plane wave is normally incident from air onto the surface of a calm ocean. For
seawater, σ = 4 S/m, and R
= 78.
a) Determine the fractions of the incident power that are reflected and transmitted: First we find the
loss tangent:
σ 4
= = 18.4
ω
2π(50 × 106 )(78)(8.854 × 10−12 )
This value is sufficiently greater than 1 to enable seawater to be considered a good conductor
at 50MHz.
√ Then, using the approximation (Eq. 65, Chapter 11), the intrinsic impedance is
ηs = πf µ/σ (1 + j ), and the reflection coefficient becomes
√
πf µ/σ (1 + j ) − η0
=√
πf µ/σ (1 + j ) + η0
√ 
where πf µ/σ = π(50 × 106 )(4π × 10−7 )/4 = 7.0. The fraction of the power reflected is
√
Pr [ πf µ/σ − η0 ]2 + πf µ/σ [7.0 − 377]2 + 49.0
= || = √
2
= = 0.93
Pi [ πf µ/σ + η0 ]2 + πf µ/σ [7.0 + 377]2 + 49.0

The transmitted fraction is then

Pt
= 1 − ||2 = 1 − 0.93 = 0.07
Pi

b) Qualitatively, how will these answers change (if at all) as the frequency is increased? Within
the limits of our good conductor approximation (loss tangent greater than about ten), the reflected
power fraction, using the formula derived in part a, is found to decrease with increasing frequency.
The transmitted power fraction thus increases.

12.13. A right-circularly-polarized plane wave is normally incident from air onto a semi-infinite slab of plex-
iglas (R
= 3.45, R

= 0). Calculate the fractions of the incident power that are reflected and trans-
mitted. Also, describe the polarizations
√ of the reflected and transmitted waves. First, the impedance of
the plexiglas will be η = η0 / 3.45 = 203 . Then

203 − 377
= = −0.30
203 + 377

The reflected power fraction is thus ||2 = 0.09. The total electric field in the plane of the interface
must rotate in the same direction as the incident field, in order to continually satisfy the boundary
condition of tangential electric field continuity across the interface. Therefore, the reflected wave will
have to be left circularly polarized in order to make this happen. The transmitted power fraction is now
1 − ||2 = 0.91. The transmitted field will be right circularly polarized (as the incident field) for the
same reasons.

205
12.14. A left-circularly-polarized plane wave is normally-incident onto the surface of a perfect conductor.
a) Construct the superposition of the incident and reflected waves in phasor form: Assume positive
z travel for the incident electric field. Then, with reflection coefficient,  = −1, the incident and
reflected fields will add to give the total field:
Etot = Ei + Er = E0 (ax + j ay )e−jβz − E0 (ax + j ay )e+jβz
 
 −jβz      
= E0 
 e − e jβz
a x + j e −jβz
− e jβz
ay 
 = 2E0 sin(βz) ay − j ax
     
−2j sin(βz) −2j sin(βz)

b) Determine the real instantaneous form of the result of part a:

   
E(z, t) = Re Etot ej ωt = 2E0 sin(βz) cos(ωt)ay + sin(ωt)ax

c) Describe the wave that is formed: This is a standing wave exhibiting circular polarization in
time. At each location along the z axis, the field vector rotates clockwise in the xy plane, and has
amplitude (constant with time) given by 2E0 sin(βz).

12.15. Consider these regions in which 

= 0: region 1, z < 0, µ1 = 4 µH/m and 1
= 10 pF/m; region 2,
0 < z < 6 cm, µ2 = 2 µH /m, 2
= 25 pF/m; region 3, z > 6 cm, µ3 = µ1 and 3
= 1
.
a) What is the lowest frequency at which a uniform plane wave incident from region 1 onto the
boundary at z = 0 willhave no reflection? This frequency gives the condition β2 d = π , where
d = 6 cm, and β2 = ω µ2 2
Therefore
π 1
β2 d = π ⇒ ω = 

⇒ f =  = 1.2 GHz
(.06) µ2 2 0.12 (2 × 10−6 )(25 × 10−12 )

b) If f = 50 MHz, what  will the standing wave ratio be in region 1? At the given frequency,
β2 = (2π × 5 × 107 ) (2 × 10−6 )(25 × 10−12 ) = 2.22 rad/m.
 Thus β2 d = 2.22(.06) = 0.133.
The intrinsic impedance of regions 1 and 3 is η1 = η3 = (4 × 10−6 )/(10−11 ) = 632 . The
input impedance at the first interface is now

632 cos(.133) + j 283 sin(.133)
ηin = 283 = 589 − j 138 = 605 − .23
283 cos(.133) + j 632 sin(.133)
The reflection coefficient is now
ηin − η1 589 − j 138 − 632
= = = .12 − 1.7
ηin + η1 589 − j 138 + 632
The standing wave ratio is now
1 + || 1 + .12
s= = = 1.27
1 − || 1 − .12

12.16. A uniform plane wave in air is normally-incident onto a lossless dielectric plate of thickness λ/8, and
of intrinsic impedance η = 260 . Determine the standing wave ratio in front of the plate. Also find
the fraction of the incident power that is transmitted to the other
√ side of the plate: With the a thickness
of λ/8, we have βd = π/4, and so cos(βd) = sin(βd) = 1 2. The input impedance thus becomes

377 + j 260
ηin = 260 = 243 − j 92 
260 + j 377

206
12.16. (continued)
The reflection coefficient is then
(243 − j 92) − 377
= = −0.19 − j 0.18 = 0.26 − 2.4rad
(243 − j 92) + 377

Therefore
1 + .26
s= = 1.7 and 1 − ||2 = 1 − (.26)2 = 0.93
1 − .26

12.17. Repeat Problem 12.16 for the cases in which the frequency is
a) doubled: If this is true, then d = λ/4, and thus ηin = (260)2 /377 = 179. The reflection coefficient
becomes
179 − 377 1 + .36
= = −0.36 ⇒ s = = 2.13
179 + 377 1 − .36
Then 1 − ||2 = 1 − (.36)2 = 0.87.
b) quadrupled: Now, d = λ/2, and so we have a half-wave section surrounded by air. Transmission
will be total, and so s = 1 and 1 − ||2 = 1.

12.18. In Fig. 12.6, let η1 = η3 = 377, and η2 = 0.4η1 . A uniform plane wave is normally incident from
the left, as shown. Plot a curve of the standing wave ratio, s, in the region to the left:
a) as a function of l if f = 2.5GHz: With η1 = η3 = η0 and with η2 = 0.4η0 , Eq. (41) becomes
 
cos(βl) + j 0.4 sin(βl) 0.4 cos(βl) − j sin(βl)
ηin = 0.4η0 ×
0.4 cos(βl) + j sin(βl) 0.4 cos(βl) − j sin(βl)

1 − j 1.05 sin(2βl)
= η0
cos2 (βl) + 6.25 sin2 (βl)

Then  = (ηin − η0 )/(ηin + η0 ), from which we find

  1/2
√ 1 − cos2 (βl) − 6.25 sin2 (βl) 2 + (1.05)2 sin2 (2βl)
|| =  ∗ =  2
1 + cos2 (βl) + 6.25 sin2 (βl) + (1.05)2 sin2 (2βl)
√
Then s = (1 + ||)/(1 − ||). Now for a uniform plane wave, β = ω µ = nω/c. Given that
η2 = 0.4η0 = η0 /n, we find n = 2.5 (assuming µ = µ0 ). Thus, at 2.5 GHz,

nω (2.5)(2π)(2.5 × 109 )
βl = l= l = 12.95 l (l in m) = 0.1295 l (l in cm)
c 3 × 108
Using this in the expression for ||, and calculating s as a function of l in cm leads to the first plot
shown on the next page.
b) as a function of frequency if l = 2cm. In this case we use

(2.5)(2π)(0.02)
βl = f = 1.04 × 10−10 f (f in Hz) = 0.104 f (f in GHz)
3 × 108
Using this in the expression for ||, and calculating s as a function of f in GHz leads to the second
plot shown on the next page. MathCad was used in both cases.

207
12.18 (continued) Plots for parts a and b

12.19. You are given four slabs of lossless dielectric, all with the same intrinsic impedance, η, known to
be different from that of free space. The thickness of each slab is λ/4, where λ is the wavelength as
measured in the slab material. The slabs are to be positioned parallel to one another, and the combination
lies in the path of a uniform plane wave, normally-incident. The slabs are to be arranged such that the
air spaces between them are either zero, one-quarter wavelength, or one-half wavelength in thickness.
Specify an arrangement of slabs and air spaces such that
a) the wave is totally transmitted through the stack: In this case, we look for a combination of half-
wave sections. Let the inter-slab distances be d1 , d2 , and d3 (from left to right). Two possibilities are
i.) d1 = d2 = d3 = 0, thus creating a single section of thickness λ, or ii.) d1 = d3 = 0, d2 = λ/2,
thus yielding two half-wave sections separated by a half-wavelength.
b) the stack presents the highest reflectivity to the incident wave: The best choice here is to make
d1 = d2 = d3 = λ/4. Thus every thickness is one-quarter wavelength. The impedances transform
as follows: First, the input impedance at the front surface of the last slab (slab 4) is ηin,1 = η2 /η0 .
We transform this back to the back surface of slab 3, moving through a distance of λ/4 in free
space: ηin,2 = η02 /ηin,1 = η03 /η2 . We next transform this impedance to the front surface of slab 3,
producing ηin,3 = η2 /ηin,2 = η4 /η03 . We continue in this manner until reaching the front surface
of slab 1, where we find ηin,7 = η8 /η07 . Assuming η < η0 , the ratio ηn /η0n−1 becomes smaller as
n increases (as the number of slabs increases). The reflection coefficient for waves incident on the
front slab thus gets close to unity, and approaches 1 as the number of slabs approaches infinity.

12.20. The 50MHz plane wave of Problem 12.12 is incident onto the ocean surface at an angle to the normal
of 60◦ . Determine the fractions of the incident power that are reflected and transmitted for
a) s polarization: To review Problem 12, we first we find the loss tangent:

σ 4


= = 18.4
ω 2π(50 × 10 )(78)(8.854 × 10−12 )
6

This value is sufficiently greater than 1 to enable seawater to be considered a good conductor at
50MHz. Then, using √ the approximation (Eq. 65, Chapter 11), and with µ = µ0 , the intrinsic
impedance is ηs = πf µ/σ (1 + j ) = 7.0(1 + j ).

208
12.20a. (continued)
Next we need the angle of refraction, which means that we need to know the refractive index of
seawater at 50MHz. For a uniform plane wave in a good conductor, the phase constant is


nsea ω .  . µσ
β= = πf µσ ⇒ nsea = c = 26.8
c 4πf

Then, using Snell’s law, the angle of refraction is found:

nsea
sin θ2 = sin θ1 = 26.8 sin(60◦ ) ⇒ θ2 = 1.9◦
n1
.
This angle is small enough so that cos θ2 = 1. Therefore, for s polarization,

. ηs2 − ηs1 7.0(1 + j ) − 377/ cos 60◦

s = = = −0.98 + j 0.018 = 0.98 179◦
ηs2 + ηs1 7.0(1 + j ) + 377/ cos 60◦

The fraction of the power reflected is now |s |2 = 0.96. The fraction transmitted is then 0.04.
b) p polarization: Again, with the refracted angle close to zero, the relection coefficient for p polar-
ization is

. ηp2 − ηp1 7.0(1 + j ) − 377 cos 60◦

p = = ◦
= −0.93 + j 0.069 = 0.93 176◦
ηp2 + ηp1 7.0(1 + j ) + 377 cos 60

The fraction of the power reflected is now |p |2 = 0.86. The fraction transmitted is then 0.14.

12.21. A right-circularly polarized plane wave in air is incident at Brewster’s angle onto a semi-infinite slab
of plexiglas (R
= 3.45, R

= 0, µ = µ0 ).
a) Determine the fractions of the incident power that are reflected
√ and transmitted: In plexiglas,
Brewster’s angle is θB = θ1 = tan−1 (R2
/
) = tan−1 ( 3.45) = 61.7◦ . Then the angle of
R1
refraction is θ2 = 90◦ − θB (see Example 12.9), or θ2 = 28.3◦ . With incidence at Brewster’s
angle, all p-polarized power will be transmitted — only s-polarized power will be reflected. This
is found through
η2s − η1s .614η0 − 2.11η0
s = = = −0.549
η2s + η1s .614η0 + 2.11η0
where η1s = η1 sec θ1 = η0 sec(61.7 ◦ ) = 2.11η ,
√ 0
and η2s = η2 sec θ2 = (η0 / 3.45) sec(28.3◦ ) = 0.614η0 . Now, the reflected power fraction
is ||2 = (−.549)2 = .302. Since the wave is circularly-polarized, the s-polarized component
represents one-half the total incident wave power, and so the fraction of the total power that is
reflected is .302/2 = 0.15, or 15%. The fraction of the incident power that is transmitted is then
the remainder, or 85%.
b) Describe the polarizations of the reflected and transmitted waves: Since all the p-polarized com-
ponent is transmitted, the reflected wave will be entirely s-polarized (linear). The transmitted
wave, while having all the incident p-polarized power, will have a reduced s-component, and so
this wave will be right-elliptically polarized.

209
12.22. A dielectric waveguide is shown in Fig. 12.18 with refractive indices as labeled. Incident light enters
the guide at angle φ from the front surface normal as shown. Once inside, the light totally reflects
at the upper n1 − n2 interface, where n1 > n2 . All subsequent reflections from the upper an lower
boundaries will be total as well, and so the light is confined to the guide. Express, in terms of n1 and
n2 , the maximum value of φ such that total confinement will occur, with n0 = 1. The quantity sin φ is
known as the numerical aperture of the guide.
From the illustration we see that φ1 maximizes when θ1 is at its minimum value. This minimum will
be the critical angle for the n1 − n2 interface, where sin θc = sin θ1 = n2 /n1 . Let the refracted angle
to the right of the vertical interface (not shown) be φ2 , where n0 sin φ1 = n1 sin φ2 . Then we see that
φ2 + θ1 = 90◦ , and so sin θ1 = cos φ2 . Now, the numerical aperture becomes
  
n1
sin φ1max = sin φ2 = n1 cos θ1 = n1 1 − sin θ1 = n1 1 − (n2 /n1 ) = n21 − n22
2 2
n0
 
Finally, φ1max = sin −1 n1 − n2 is the numerical aperture angle.
2 2

12.23. Suppose that φ1 in Fig. 12.18 is Brewster’s angle, and that θ1 is the critical angle. Find n0 in terms of
n1 and n2 : With the incoming ray at Brewster’s angle, the refracted angle of this ray (measured from
the inside normal to the front surface) will be 90◦ − φ1 . Therefore, φ1 = θ1 , and thus sin φ1 = sin θ1 .
Thus 
n1 n2
sin φ1 =  = sin θ1 = ⇒ n0 = (n1 /n2 ) n21 − n22
n20 + n21 n1

Alternatively,
 we could have used the result of Problem 12.22, in which it was found that sin φ1 =
(1/n0 ) n1 − n22 , which we then set equal to sin θ1 = n2 /n1 to get the same result.
2

12.24. A Brewster prism is designed to pass p-polarized light without any reflective loss. The prism of Fig.
12.19 is made of glass (n = 1.45), and is in air. Considering the light path shown, determine the apex
angle, α: With entrance and exit rays at Brewster’s angle (to eliminate reflective loss), the interior ray
must be horizontal, or parallel to the bottom surface of the prism. From the geometry, the angle between
the interior ray and the normal to the prism surfaces that it intersects is α/2. Since this angle is also
Brewster’s angle, we may write:
   
1 1
α = 2 sin−1 √ = 2 sin−1  = 1.21 rad = 69.2◦
1 + n2 1 + (1.45)2

12.25. In the Brewster prism of Fig. 12.19, determine for s-polarized light the fraction of the incident power
that is transmitted through the prism: We use s = (ηs2 − ηs1 )/(ηs2 + ηs1 ), where
η2 η2 η0 
ηs2 = = √ = 2 1 + n2
cos(θB2 ) n/ 1 + n2 n

and η1 η1 
ηs1 = = √ = η0 1 + n2
cos(θB1 ) 1/ 1 + n2

210
12.25. (continued) Thus, at the first interface,  = (1 − n2 )/(1 + n2 ). At the second interface,  will be equal
but of opposite sign to the above value. The power transmission coefficient through each interface is
1 − ||2 , so that for both interfaces, we have, with n = 1.45:
  2  2 2
Ptr  2 n −1
= 1 − ||2
= 1− = 0.76
Pinc n2 + 1

12.26. Show how a single block of glass can be used to turn a p-polarized beam of iight through 180◦ , with the
light suffering, in principle, zero reflective loss. The light is incident from air, and the returning beam
(also in air) may be displaced sideways from the incident beam. Specify all pertinent angles and use
n = 1.45 for glass. More than one design is possible here.
The prism below is designed such that light enters at Brewster’s angle, and once inside, is turned around
using total reflection. Using the result of Example 12.9, we find that with glass, θB = 55.4◦ , which, by
the geometry, is also the incident angle for total reflection at the back of the prism. For this to work,
the Brewster angle must be greater than or equal to the critical angle. This is in fact the case, since
θc = sin−1 (n2 /n1 ) = sin−1 (1/1.45) = 43.6◦ .

12.27. Using Eq. (59) in Chapter 11 as a starting point, determine the ratio of the group and phase velocities
of an electromagnetic wave in a good conductor. Assume conductivity does not vary with frequency:
In a good conductor:


 ωµσ dβ 1  ωµσ −1/2 µσ
β = πf µσ = → =
2 dω 2 2 2

Thus
 −1  
dω dβ 2ω ω ω 2ω
= =2 = vg and vp = = √ =
dβ dω µσ β ωµσ /2 µσ
Therefore vg /vp = 2.

211
12.28. Over a certain frequency range, the refractive index of a certain material varies approximately linearly
.
with frequency: n(ω) = na + nb (ω − ωa ), where na , nb , and ωa are constants. Using β = nω/c:
a) determine the group velocity as a function (or perhaps not a function) of frequency:
vg = (dβ/dω)−1 , where

dβ d na ω nb (ω − ωa )ω 1
= + = [na + nb (2ω − ωa )]
dω dω c c c
so that
vg (ω) = c [na + nb (2ω − ωa )]−1
b) determine the group dispersion parameter, β2 :

d 2 β  d 1 

β2 =  = [na + n b (2ω − ω a 
)] = 2nb /c
dω2 ω0 dω c ω0

c) Discuss the implications of these results, if any, on pulse broadening: The point of this problem was
to show that higher order terms (involving d 3 β/dω3 and higher) in the Taylor series expansion,
Eq. (89), do not exist if the refractive index varies linearly with ω. These higher order terms
would be necessary in cases involving pulses of exremely large bandwidth, or in media exhibiting
complicated variations in their ω-β curves over relatively small frequency ranges. With d 2 β/dω2
constant, the three-term Taylor expansion of Eq. (89) describes the phase constant of this medium
exactly. The pulse will broaden and will acquire a frequency sweep (chirp) that is precisely linear
with time. Additionally, a pulse of a given bandwidth will broaden by the same amount, regardless
of what carrier frequency is used.

12.29. A T = 5 ps transform-limited pulse propagates in a dispersive channel for which β2 = 10 ps2 /km.
Over 
what distance will the pulse spread
√ to twice its initial width? After propagation, the width is
T
= T 2 + (τ )2 = 2T . Thus τ = 3T , where τ = β2 z/T . Therefore
√ 2 √
β2 z √ 3T 3(5 ps)2
= 3T or z = = = 4.3 km
T β2 10 ps2 /km

12.30. A T = 20 ps transform-limited pulse propagates through 10 km of a dispersive channel for which β2 =

12 ps2 /km. The pulse then propagates through a second 10 km channel for which β2 = −12 ps2 /km.
Describe the pulse at the output of the second channel and give a physical explanation for what hap-
pened.
Our theory of pulse spreading will allow for changes in β2 down the length of the channel. In fact, we
may write in general:
1 L
τ = β2 (z) dz
T 0
Having β2 change sign at the midpoint, yields a zero τ , and so the pulse emerges from the output
unchanged! Physically, the pulse acquires a positive linear chirp (frequency increases with time over
the pulse envelope) during the first half of the channel. When β2 switches sign, the pulse begins to
acquire a negative chirp in the second half, which, over an equal distance, will completely eliminate
the chirp acquired during the first half. The pulse, if originally transform-limited at input, will emerge,
again transform-limited, at its original width. More generally, complete dispersion compensation is
achieved using a two-segment channel when β2 L = −β2
L
, assuming dispersion terms of higher order
than β2 do not exist.

212