Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Doc

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11
At a glance
Powered by AI
The document describes safety information for a product called RESOLV EC2472A, including its composition, hazards, and safety precautions that should be followed.

RESOLV EC2472A is an emulsion breaker product used to treat emulsions.

The product is flammable and contains substances that are suspected carcinogens.

SAFETY DATA SHEET

RESOLV® EC2472A

Section: 1. PRODUCT AND COMPANY IDENTIFICATION

Product name : RESOLV® EC2472A

Other means of identification : Not applicable.

Recommended use : EMULSION BREAKER

Restrictions on use : Refer to available product literature or ask your local Sales
Representative for restrictions on use and dose limits.

Company : Nalco Champion Company


7705 Highway 90-A
Sugar Land, Texas 77478
USA
TEL: (281) 263-7000

Emergency telephone : (800) 424-9300 (24 Hours) CHEMTREC


number

Issuing date : 03/10/2015

Section: 2. HAZARDS IDENTIFICATION

GHS Classification
Flammable liquids : Category 3
Carcinogenicity : Category 2

GHS Label element


Hazard pictograms :

Signal Word : Warning

Hazard Statements : Flammable liquid and vapour.


Suspected of causing cancer.

Precautionary Statements : Prevention:


Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Keep away from
heat/sparks/open flames/hot surfaces. - No smoking. Keep
container tightly closed. Ground/bond container and receiving
equipment. Use explosion-proof electrical/ ventilating/ lighting/
equipment. Use only non-sparking tools. Take precautionary
measures against static discharge. Wear protective gloves/ eye
protection/ face protection. Use personal protective equipment as
required.
Response:
IF ON SKIN (or hair): Remove/ Take off immediately all
contaminated clothing. Rinse skin with water/ shower. IF exposed
or concerned: Get medical advice/attention. In case of fire: Use dry
sand, dry chemical or alcohol-resistant foam for extinction.

1 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

Storage:
Store in a well-ventilated place. Keep cool. Store locked up.
Disposal:
Dispose of contents/ container to an approved waste disposal
plant.

Other hazards : None known.

Section: 3. COMPOSITION/INFORMATION ON INGREDIENTS

Pure substance/mixture : Mixture

Chemical Name CAS-No. Concentration: (%)


Heavy Aromatic Naphtha 64742-94-5 10 - 30
Kerosene 8008-20-6 10 - 30
Naphthalene 91-20-3 1-5
1,2,4-Trimethylbenzene 95-63-6 1-5
Ethylbenzene 100-41-4 0.1 - 1

Section: 4. FIRST AID MEASURES

In case of eye contact : Rinse with plenty of water. Get medical attention if symptoms occur.

In case of skin contact : Wash off with soap and plenty of water. Get medical attention if
symptoms occur.

If swallowed : Do NOT induce vomiting. Rinse mouth. Get medical attention if


symptoms occur.

If inhaled : Get medical attention if symptoms occur.

Protection of first-aiders : In event of emergency assess the danger before taking action. Do
not put yourself at risk of injury. If in doubt, contact emergency
responders.Use personal protective equipment as required.

Notes to physician : Treat symptomatically.

Most important symptoms : See Section 11 for more detailed information on health effects and
and effects, both acute and symptoms.
delayed

Section: 5. FIREFIGHTING MEASURES

Suitable extinguishing media : Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.

Unsuitable extinguishing : High volume water jet


media

Specific hazards during : Fire Hazard


firefighting Keep away from heat and sources of ignition.
Flash back possible over considerable distance.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

Hazardous combustion : Carbon oxides


products

2 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

Special protective equipment : Use personal protective equipment.


for firefighters

Specific extinguishing : Use water spray to cool unopened containers. Fire residues
methods and contaminated fire extinguishing water must be disposed
of in accordance with local regulations. In the event of fire
and/or explosion do not breathe fumes.

Section: 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, : Remove all sources of ignition. Refer to protective measures listed
protective equipment and in sections 7 and 8.
emergency procedures

Environmental precautions : Do not allow contact with soil, surface or ground water.

Methods and materials for : Eliminate all ignition sources if safe to do so. Stop leak if safe to do
containment and cleaning up so. Contain spillage, and then collect with non-combustible
absorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to local /
national regulations (see section 13). Flush away traces with water.
For large spills, dike spilled material or otherwise contain material to
ensure runoff does not reach a waterway.

Section: 7. HANDLING AND STORAGE

Advice on safe handling : Take necessary action to avoid static electricity discharge (which
might cause ignition of organic vapours). Keep away from fire,
sparks and heated surfaces. Wash hands thoroughly after handling.
Use only with adequate ventilation.

Conditions for safe storage : Keep away from heat and sources of ignition. Keep in a cool, well-
ventilated place. Keep away from oxidizing agents. Keep out of
reach of children. Keep container tightly closed. Store in suitable
labeled containers.

Suitable material : The following compatibility data is suggested based on similar


product data and/or industry experience: Stainless Steel 304,
Stainless Steel 316L, Carbon Steel C1018, Aluminum, Brass,
Copper, Hastelloy C-276, PTFE, Surface fluorinated polyethylene,
Fluoroelastomer, Perfluoroelastomer, Compatibility with Plastic
Materials can vary; we therefore recommend that compatibility is
tested prior to use.

Unsuitable material : The following compatibility data is suggested based on similar


product data and/or industry experience: Buna-N, EPDM, Ethylene
propylene, HDPE (high density polyethylene), Neoprene, PVC,
Polyurethane, Polypropylene, Polyethylene, Rubber,
Polytetrafluoroethylene/polypropylene copolymer, Chlorosulfonated
polyethylene rubber

Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Basis
Components CAS-No. Form of Permissible

3 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

exposure concentration
Heavy Aromatic Naphtha 64742-94-5 TWA 500 ppm OSHA Z1
2,000 mg/m3
TWA 200 mg/m3 ACGIH
Kerosene 8008-20-6 TWA 100 mg/m3 NIOSH REL
TWA 500 ppm OSHA Z1
2,000 mg/m3
TWA 200 mg/m3 ACGIH
Naphthalene 91-20-3 TWA 10 ppm ACGIH
TWA 10 ppm NIOSH REL
50 mg/m3
STEL 15 ppm NIOSH REL
75 mg/m3
TWA 10 ppm OSHA Z1
50 mg/m3
1,2,4-Trimethylbenzene 95-63-6 TWA 25 ppm NIOSH REL
125 mg/m3
Ethylbenzene 100-41-4 TWA 20 ppm ACGIH
TWA 100 ppm NIOSH REL
435 mg/m3
STEL 125 ppm NIOSH REL
545 mg/m3
TWA 100 ppm OSHA Z1
435 mg/m3

Engineering measures : Effective exhaust ventilation system Maintain air concentrations


below occupational exposure standards.

Personal protective equipment

Eye protection : Safety glasses

Hand protection : Wear protective gloves.


Gloves should be discarded and replaced if there is any indication of
degradation or chemical breakthrough.

Skin protection : Wear suitable protective clothing.

Respiratory protection : When workers are facing concentrations above the exposure limit
they must use appropriate certified respirators.

Hygiene measures : Handle in accordance with good industrial hygiene and safety
practice. Remove and wash contaminated clothing before re-use.
Wash face, hands and any exposed skin thoroughly after handling.

Section: 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Liquid
Colour : dark brown
Odour : hydrocarbon-like
Flash point : 56 °C
Method: ASTM D 93, Pensky-Martens closed cup

pH : Not applicable.
Odour Threshold : no data available

4 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

Melting point/freezing point : POUR POINT: -37 °C


Initial boiling point and boiling : 158.3 °C
range
Evaporation rate : no data available
Flammability (solid, gas) : no data available
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : 3.1 mm Hg (70 °C)
Relative vapour density : no data available
Relative density : 0.97 (15.5 °C)
Density : 0.96 g/cm3
8.0 lb/gal
Water solubility : Insoluble
Solubility in other solvents : no data available
Partition coefficient: n- : no data available
octanol/water
Auto-ignition temperature : no data available
Thermal decomposition : no data available
temperature
Viscosity, dynamic : no data available
Viscosity, kinematic : 53 mm2/s (40 °C)

VOC : no data available

Section: 10. STABILITY AND REACTIVITY

Chemical stability : Stable under normal conditions.

Possibility of hazardous : No dangerous reaction known under conditions of normal use.


reactions
Conditions to avoid : Heat, flames and sparks.

Incompatible materials : Contact with strong oxidizers (e.g. chlorine, peroxides, chromates,
nitric acid, perchlorate, concentrated oxygen, permanganate) may
generate heat, fires, explosions and/or toxic vapors.

Hazardous decomposition : Carbon oxides


products

Section: 11. TOXICOLOGICAL INFORMATION

Information on likely routes of : Inhalation, Eye contact, Skin contact


exposure

Potential Health Effects

Eyes : Health injuries are not known or expected under normal use.

Skin : Health injuries are not known or expected under normal use.

5 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

Ingestion : Produces methemoglobin.

Inhalation : Health injuries are not known or expected under normal use.

Chronic Exposure : Suspected of causing cancer.

Experience with human exposure

Eye contact : No symptoms known or expected.

Skin contact : No symptoms known or expected.

Ingestion : No symptoms known or expected.

Inhalation : No symptoms known or expected.

Toxicity

Product
Acute oral toxicity : Acute toxicity estimate : > 5,000 mg/kg

Acute inhalation toxicity : Acute toxicity estimate : > 40 mg/l


Exposure time: 4 h

Acute dermal toxicity : no data available

Skin corrosion/irritation : no data available

Serious eye damage/eye : no data available


irritation

Respiratory or skin : no data available


sensitization

Carcinogenicity
IARC Group 2B: Possibly carcinogenic to humans
Naphthalene 91-20-3
Ethylbenzene 100-41-4

OSHA No component of this product present at levels greater than or


equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.

NTP Reasonably anticipated to be a human carcinogen


Naphthalene 91-20-3

Reproductive effects : no data available

Germ cell mutagenicity : no data available

Teratogenicity : no data available

STOT - single exposure : no data available

STOT - repeated exposure : no data available

6 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

Aspiration toxicity : no data available

Components
Acute dermal toxicity : Ethylbenzene
LD50 rabbit: 15,400 mg/kg

Section: 12. ECOLOGICAL INFORMATION

Ecotoxicity

Environmental Effects : Toxic to aquatic life with long lasting effects.

Product
Toxicity to fish : LC50 Pimephales promelas (fathead minnow): 5.52 mg/l
Exposure time: 96 hrs
Test substance: Product

NOEC Pimephales promelas (fathead minnow): 2.5 mg/l


Exposure time: 96 hrs
Test substance: Product

LC50 Rainbow Trout: 13.9 mg/l


Exposure time: 96 h
Test substance: Product

Toxicity to daphnia and other : LC50 Ceriodaphnia dubia: 4.67 mg/l


aquatic invertebrates Exposure time: 48 hrs
Test substance: Product
Test Type: Static

NOEC Ceriodaphnia dubia: 2.5 mg/l


Exposure time: 48 hrs
Test substance: Product
Test Type: Static

EC50 Daphnia magna: 1.55 mg/l


Exposure time: 48 h
Test substance: Product
Test Type: Static

Components
Toxicity to algae : Kerosene
EC50 : 5 mg/l
Exposure time: 72 h

Persistence and degradability

The organic portion of this preparation is expected to be inherently biodegradable.

Mobility

The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation
program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition
between the total input and output. The level III model does not require equilibrium between the
defined media. The information provided is intended to give the user a general estimate of the
environmental fate of this product under the defined conditions of the models.

7 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

If released into the environment this material is expected to distribute to the air, water and
soil/sediment in the approximate respective percentages;

Air : <5%
Water : 5 - 10%
Soil : 70 - 90%

The portion in water is expected to float on the surface.

Bioaccumulative potential

Component substances have a potential to bioaccumulate.

Other information

no data available

Section: 13. DISPOSAL CONSIDERATIONS

If this product becomes a waste, it could meet the criteria of a hazardous waste as defined by the
Resource Conservation and Recovery Act (RCRA) 40 CFR 261. Before disposal, it should be
determined if the waste meets the criteria of a hazardous waste.

Hazardous Waste: : D001,D018

Disposal methods : The product should not be allowed to enter drains, water
courses or the soil. Where possible recycling is preferred to
disposal or incineration. If recycling is not practicable, dispose
of in compliance with local regulations. Dispose of wastes in
an approved waste disposal facility.

Disposal considerations : Dispose of as unused product. Empty containers should be


taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers.

Section: 14. TRANSPORT INFORMATION

The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are
in compliance with the selected mode of transport.

Land transport (DOT)

The presence of an RQ component (Reportable Quantity for U.S. EPA and DOT) in this product
causes it to be regulated with an additional description of RQ for road, or as a class 9 for road and air,
ONLY when the net weight in the package exceeds the calculated RQ for the product.

Proper shipping name : FLAMMABLE LIQUID, N.O.S.


Technical name(s) : Kerosene, Heavy Aromatic Naphtha
UN/ID No. : UN 1993
Transport hazard class(es) : 3
Packing group : III
Reportable Quantity (per : 2,506 lbs
package)
RQ Component : Naphthalene

Air transport (IATA)

8 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

The presence of an RQ component (Reportable Quantity for U.S. EPA and DOT) in this product
causes it to be regulated with an additional description of RQ for road, or as a class 9 for road and air,
ONLY when the net weight in the package exceeds the calculated RQ for the product.

Proper shipping name : FLAMMABLE LIQUID, N.O.S.


Technical name(s) : Kerosene, Heavy Aromatic Naphtha
UN/ID No. : UN 1993
Transport hazard class(es) : 3
Packing group : III
Reportable Quantity (per : 2,506 lbs
package)
RQ Component : Naphthalene

Sea transport (IMDG/IMO)

Proper shipping name : FLAMMABLE LIQUID, N.O.S.


Technical name(s) : Kerosene, Heavy Aromatic Naphtha
UN/ID No. : UN 1993
Transport hazard class(es) : 3
Packing group : III

*Marine pollutant : Naphthalene

*Note: This product is regulated as a Marine Pollutant when shipped by Rail, Highway (in bulk
quantities), or Air (if no other hazard class applies), and when shipped by water in all quantities.

Section: 15. REGULATORY INFORMATION

EPCRA - Emergency Planning and Community Right-to-Know Act

CERCLA Reportable Quantity


Components CAS-No. Component RQ (lbs) Calculated product RQ
(lbs)
Naphthalene 91-20-3 100 2506

SARA 304 Extremely Hazardous Substances Reportable Quantity


This material does not contain any components with a section 304 EHS RQ.

SARA 311/312 Hazards : Fire Hazard


Chronic Health Hazard

SARA 302 : No chemicals in this material are subject to the reporting requirements
of SARA Title III, Section 302.
SARA 313 : The following components are subject to reporting levels established
by SARA Title III, Section 313:
Naphthalene 91-20-3 1-5%
1,2,4-Trimethylbenzene 95-63-6 1-5%
Ethylbenzene 100-41-4 0.1 - 1 %

California Prop 65
WARNING! This product contains a chemical known to the State of California to cause cancer.

Naphthalene 91-20-3
Ethylbenzene 100-41-4

INTERNATIONAL CHEMICAL CONTROL LAWS :

9 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

TOXIC SUBSTANCES CONTROL ACT (TSCA)


The substances in this preparation are included on or exempted from the TSCA 8(b) Inventory (40
CFR 710)

CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA)


The substance(s) in this preparation are included in or exempted from the Domestic Substance List
(DSL).

AUSTRALIA
All substances in this product comply with the National Industrial Chemicals Notification & Assessment
Scheme (NICNAS).

CHINA
All substances in this product comply with the Provisions on the Environmental Administration of New
Chemical Substances and are listed on or exempt from the Inventory of Existing Chemical Substances
China (IECSC).

EUROPE
The substances in this preparation have been reviewed for compliance with the EINECS or ELINCS
inventories.

JAPAN
All substances in this product comply with the Law Regulating the Manufacture and Importation Of
Chemical Substances and are listed on the Existing and New Chemical Substances list (ENCS).

KOREA
All substances in this product comply with the Toxic Chemical Control Law (TCCL) and are listed on
the Existing Chemicals List (ECL)

NEW ZEALAND
All substances in this product comply with the Hazardous Substances and New Organisms (HSNO)
Act 1996,and are listed on or are exempt from the New Zealand Inventory of Chemicals.

PHILIPPINES
All substances in this product comply with the Republic Act 6969 (RA 6969) and are listed on the
Philippines Inventory of Chemicals & Chemical Substances (PICCS).

Section: 16. OTHER INFORMATION

NFPA: HMIS III:


Flammability

HEALTH 2*
2
Instability
Health

2 0 FLAMMABILITY 2
PHYSICAL HAZARD 0
0 = not significant, 1 =Slight,
2 = Moderate, 3 = High
Special hazard. 4 = Extreme, * = Chronic

Revision Date : 03/10/2015


Version Number : 1.0
Prepared By : Regulatory Affairs

10 / 11
SAFETY DATA SHEET
RESOLV® EC2472A

REVISED INFORMATION: Significant changes to regulatory or health information for this revision
is indicated by a bar in the left-hand margin of the SDS.

The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is
not to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
For additional copies of an MSDS visit www.nalco.com and request access.

11 / 11

You might also like