International Journal of Engineering Applied Sciences and Technology, 2019

Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 48-52

Published Online June 2019 in IJEAST (http://www.ijeast.com)

DESIGN OF FOOTSTEP POWER

GENERATION SYSTEM USING RACK AND
PINION GEARS MECHANISM
Muhammad Asad Saeed Muhammad Hamza Tahir
Trainee Mechanical Engineer Research Associate
Hafiz Foundry Company PVT. LTD. Department of Mechanical Engineering
Pakistan Institute of Engineering and
Technology, Multan, Pakistan

Nouman Zaffar Arslan Malik

Mechanical Engineer Assistant Manufacture Engineer
Honda Breeze, Multan Hafiz Foundry Company PVT. LTD.

Abstract - Energy is the main concern of present increasing every day. Man has used remarkable
day. The production of electric current in a huge amount of energy for his daily needs. Therefore,
amount is the need of today world. There are large amount of energy has been exhausted and
different methods used for the production of wasted. Whether we realize it or not, energy is an
energy like conventional and non-conventional important part of most aspects of daily life. The
methods. Here I will represent the non-
quantity of life and even its sustenance, depends on
conventional method for the production of electric
current. This non-conventional method is the availability of energy. Therefore, it is important
“Footstep power generation Mechanism” here the to have a good understanding of the sources of
energy will be produce by moving the human on a energy, the conversion of energy from one form to
moving plates in which rack and pinion gear are another and the ramifications of these conversion.
used to convert the physical energy into The expanded mindfulness that the world's energy
mechanical energy and further they will have assets are restricted has cause numerous nations to
converted into electric energy by using the
rethink their vitality strategies and take extraordinary
dynamo. By using this method, we will have
produced the energy to light up the bulb. I will measures in killing waste. It has likewise started
also represent the simulation of the footstep power interest for established researchers to investigate the
generator using the ansys17.0 software. By the energy change gadgets and to grow new strategies to
results its seen we will produce the 10.925kw more readily use the current restricted
power in one hour. This project will be cost assets.[1],[2],[3]Therefore, here we will explain a
effective and easy to installed in a populated area new technique for electricity generation. This new
like railway station, bus stands and in shopping
malls. Our project is cost effective and easy to technique work on the law of conservation of energy
implement. “energy neither created or nor destroyed its can
Keywords changed its form”. Foot step power generation
system is designed to be very useful at public places
Foot Step, Electricity Generation, Rack and
like railway station, bus stand, shopping malls where
Pinion gear, Dynamo, Battery, Inverter.
lot of people keep walking through all day.[4],[5]
This entire human vitality being squandered if can be
I. INTRODUCTION
made workable for usage it will incredible
development and group vitality ranches will be
Now a day‟s electricity is an important one for
extremely helpful vitality sources in packed nations.
human population. The demand of electricity is

48
 International Journal of Engineering Applied Sciences and Technology, 2019
Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 48-52
Published Online June 2019 in IJEAST (http://www.ijeast.com)

In this paper portrayed about age electrical power as II. COMPONENT SELECTION
non-traditional strategy by essentially strolling or AND DESIGN
running on the stride. On-conventional system is very CALCULATION
essential at this time to our nation. Non-ordinary a. Frame
vitality utilizing stride is changing over mechanical Frame is the foremost supportive element in
vitality into the electrical vitality. There is some the system. The frame needs to endure all the
method to generate electrical energy from footsteps. heaviness of the exploratory setup. The power
Such as gear wheel and flywheel are methods to applied on the framework is conveyed to the four
generate electrical power.[6],[7] This method works legs.
on the movement of gear rack or pinion and its
mechanical parts are used because this is placed b. Rod
where there are so many people and the energy is A high carbon alloy steel that is EN8/ AISI 1045 was
produced by their movement on the floor.[8],[9] selected as material for rod. The measurement of rod
There is also some other mechanism to produce is given below:
energy from foot step power generation. Generation Table2.1 properties of rod
of power is done by footsteps from the crowed on Sr. # Properties Diameter
floor and piezo plate scheme is used below the floor, 1. Height (H) 120mm
then there will be sheet which cover the piezo plate 2. Outer diameter (Do) 22mm
and also spring will be there for vibrating force on
piezo sensor.[10],[11] The piezo plate will be struck
in the floor such a plate will generate power in the c. spring
form of electric current. The power which is A spring is characterized as a versatile body, whose
produced can be used as additional features like street capacity is to twist when stacked and to recuperate its
light or light which is used at the place of pedestrians, unique shape when burden is expelled. There are
so the pedestrians should give credit the energy many types of springs but here we used a helical
which is produced by their movement.[12],[13],[14] compression spring and there are four springs used as
Here we will show the block diagram for foot step our requirement. The specification of spring is given
power generation system. In this block diagram below;
whole mechanism will be explain step by step Table2.2 properties of spring
working process for the foot step power generation. Sr. # Properties Value
1. Height (H) 100mm
2. Outer diameter (Do) 30mm
3. Inner diameter (Di) 24mm
4. Wire diameter (Dw) 3mm
5. Total no. of turns (ni) 12
6. Active no. of turns(n) 10
7. Spring index (C) 1.10
8. Free length (L) 92.96mm
9. Pitch of coil (P) 10.32mm

d. Rack and pinion

The gear of a shaft meshes externally and internally
with gear in a straight line. Such type of gear is called
rack and pinion gear. The straight line gear is called a
rack and the circular wheel is called pinion. The
specification of rack and pinion gear are given below;

49
 International Journal of Engineering Applied Sciences and Technology, 2019
Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 48-52
Published Online June 2019 in IJEAST (http://www.ijeast.com)

Table2.3 Specification of pinion electric power using electromagnetism. Its work on a

Material Cast iron Faradays law. The dynamo uses turning curl of wire
Outside diameter 75mm and attractive fields to change over mechanical
revolution into beating direct current.
Circular pitch 4.7mm
Tooth depth 3.375mm h. Inverter
Module 1.5mm It‟s an electric device that convert the direct
Pressure angle 21 current (DC) into alternating current (AC). The
Pitch circle diameter 72mm design of specific circuity depends by the input
Circular tooth thickness 2.355mm voltage, output voltage, frequency and overall power
handling capacity. The inverter does not provide
Fillet radius 0.45mm power but the power is provided with the help of DC
Clearance 0.375mm source.

Table2.4 Specification of rack i. Battery

Material Cast iron An electric battery is a device consisting of one or
Module 1.5mm more electromechanical cells that convert stored
chemical energy into electrical energy. Every cell
Cross section 75×25mm contains a positive terminal or cathode and a negative
terminal or anode. Electrolytes allow ions to move
e. Flywheel between the electrode and terminal, which allows
A flywheel utilized in machines fills in as a current to flow out of the battery to perform work.
repository which stores vitality amid the period when Specification of battery:
the supply of vitality is more than the necessity and o Battery capacity 12 1.3Ah.
discharges it amid the period when the prerequisite of o This is chargeable one.
vitality is more than supply. o Battery charging time 20 min.
Table2.5Specification of flywheel o Working conditions 2hrs.
Weight 1KG
Circular dia. 250mm III. DESIGN
Width 500 This is the 3D assembly of a foot step power
generation which is made using a solid works
f. Bearing software. We used different commands like
A bearing is a machine component which bolster rectangle, line, circle and many more commands to
another moving machine component (known as design foot step power generation system.
diary). It allows a relative movement between the
contact surfaces of the individuals, while conveying
the heap. A little thought will demonstrate that
because of the relative movement between the
contact surfaces, a specific measure of intensity is
squandered in conquering frictional obstruction and if
the scouring surfaces are in direct contact, there will
be quick wear. So as to lessen frictional obstruction
and wear and now and again to divert the warmth
produced, a layer of liquid (known as ointment)
might be given. The oil used to isolate the diary and
bearing is generally a mineral oil refined from oil,
however vegetable oils, silicon oils, oils and so forth., IV. CALCULATION
might be utilized.
Consider 120 man of mass 80 kg passes over a foot
g. Dynamo step power generation system in an hour. The height
Dynamo converts mechanical rotation into electric of rack is 14cm, the diameter of the final pulley is
power. It‟s a device that makes direct current into 18mm and having revolution speed (N) is equal to 37

50
 International Journal of Engineering Applied Sciences and Technology, 2019
Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 48-52
Published Online June 2019 in IJEAST (http://www.ijeast.com)

RPM. Down word motion of foot step is due to the

weight of moving the person and upward motion of VI. CONCLUSION
foot step is take place due to the utilization of energy Our work show that in foot step power generation
from springs. there is no need of fuel to generate the electrical
Let‟s us consider, energy. This is also an eco-friendly method for
Weight(mass) of a man=m= 80 kg energy production, there is no huge land required to
Force=F= mg=80×9.8= 784N install the as like other energy plants. There is no
r=9mm pollution, no sound, no smoke so this is a best
T=r×F(Nm) method to install this in public place area. There is no
T=9×10ˉ³×784 maintenance cost and installation cost is also less as
T=7.056Nm compared to other. We will also make the energy
P=T×w production greater than 10.925KW (hr) by increasing
P=7.056×2πN/60 the size of power generation system. We can further
P=7.056×2π37/60 design it for a different size as requirement of energy
P=7.056×3.87 to full fill. It‟s also install on parks to light up the
P=27.34 lights. Executing this system, we can easily reduce
Total generated power in forward and reversed stoke. the dependence on the other conventional sources of
P=2×27.34W energy, thus can be considered valuable from that
P=54.68W point of view.
Revolution in one minute=200/60=3.33rev/min In energy crises facing countries where the load
Power generated in one shading of electricity are due to the shortage of
minute=54.68×3.33=182.1(minute) energy, this foot step power generation system is best
Power generated in one method to produce energy and the output of
hour=182.1×60=10925.01W(hr) electricity production is increased by increasing the
Power generated in one hour=10.925 KW (hr) size of foot step power generation system. As
compare to other energy producing system the cost of
V. WORKING PROCESS this system is less.

I. When a person moves from a foot step VII. REFERENCE

power generation system the plates move [1] Bhosale, P. P. A. et al. (2017) „Design of Foot
downward direction due to force is applied Step Power Energy Generation Machine‟, 4(June),
on the plate by virtue of impressing on the pp. 943–948.
plate the force spring gets compressed. [2] Dhanalakshmi, G. et al. (2017) „Footstep Power
II. The rack here moves vertically downward. Generation System‟, International Journal Of
III. When the rack moves pinion will have Engineering And Computer Science. doi:
engaged with the rack gear results in circular 10.18535/ijecs/v6i4.38.
motion of the pinion gear. [3] Gothane, A. V and Gosavi, A. R. (2018) „Foot
IV. For one full compression the pinion moves 1 step power generation‟, pp. 1582–1584.
half circle. [4] Janugade, S. V, Yadav, G. A. and Mahadik, O. R.
V. When the force will have removed on the (2017) „Foot Steps Power Generation using
plate the pinion reverses and moves another Mechanical System‟, 4(1), pp. 55–59. doi:
half circle. 10.17148/IARJSET/NCDMETE.2017.15.
VI. The dynamo attached to the pinion hence [5] Journal, D. et al. (2017) „Footstep Power
result in the sinusoidal wave form (for single Generation‟, 2(7), pp. 8–13.
dynamo). [6] Journal, I., Technology, E. R. and Volume, S.
VII. Then, in this result energy produced will (2016) „Power Generation By Foot Steps Using
stored on battery for used. Rack‟, International Journal of Engineering

51
 International Journal of Engineering Applied Sciences and Technology, 2019
Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 48-52
Published Online June 2019 in IJEAST (http://www.ijeast.com)

Research And Advanced Technology (IJERAT),

2(01), pp. 10–14.
[7] Marshiana, D. et al. (2016) „Footstep power
production using piezoelectric sensors‟, Research
Journal of Pharmacy and Technology, 9(7), pp. 831–
834. doi: 10.5958/0974-360X.2016.00157.8.
[8] Munaswamy, B. et al. (2018) „Mechanical
Footstep Power Generation‟, 5(2), pp. 291–298.
[9] Pokale, R. S. (2016) „Design and analysis of a
Mechanical Device to harvest energy from human
footstep motion‟, 3(1), pp. 1–5.
[10] Prabhavathi, K. (2017) „Foot Step Power
Generation Using Piezoelectric Material 2016-2017‟,
1(1), pp. 595–600.
[11] Saif, A. (2016) „Generation of Electrical Energy
from Foot Step Using Rack and Pinion Mechanism‟,
3(4), pp. 693–699.
[12] Sarnaik, J. R. (2018) „Implementation of
Mechanical Power on Footstep Power Generation
System‟, pp. 205–209.
[13] Suresh, S. et al. (2018) „Design and Fabrication
of foot step power generation using rack and pinion
assembly‟, 4(8), pp. 24–26.
[14] Vasantharaj, A., Haridevi, P. and Dhivya, M.
(2016) „ELECTRICAL POWER GENERATION
USING FOOT STEPS‟, 2(10), pp. 1412–1424.

52