Bosch Horn Catalogue

The Art of Sound

The Art of Sound
Introduction
How it all began 2

Introduction to Product
The Structure 3
The Kinetics 4
The Acoustics 5

Frequently Asked Questions 6

Product Range Comparison 7

Product Ranges
Disc Horns 9
Fanfare Horns 17
Compressor Trumpets 23
Backup Buzzer 27

Application Summary 28

Appendix 31
 How it all began... The Bosch Buzzer

Automotive horns did not exist till almost a hundred years ago. At
that time, in order to signal their own presence and to warn other
road users, drivers used anything that made a loud enough noise.
Bosch saw in this clamour the need for a device that would
be easier on the ears.

In 1913 Bosch filed the first patent worldwide for automotive horns.

In 1919 we developed the buzzer system, which produced a

continuous and uniform tone with a single diaphragm. This tone,
however, made it difficult for other road users to estimate the
direction or proximity of the vehicle. Bosch later introduced a
second diaphragm, the ‘harmonic diaphragm’, which enables other
road users to better determine the position of the warning signal.

Later technological advancements led to more warning device

technologies and types, such as compressed-air and electro-
pneumatic fanfare horns.

Today Bosch horns are original equipment in vehicles made by many

renowned vehicle manufacturers. But we’re not done yet and continue
to innovate to bring the motoring world devices that are of:

Powerful Sound High Durability Design, Colour & Size Broad Application ECE Compliance

6 12 24 ECE
V V V

Effective warning power Patented Teflon filter and Suitable for Available in 6V, 12V Bosch horns are made
and harmonious sound corrosion-, impact- and internal/external/visible and 24V versions to ECE standards
for urban and rural roads weather-resistance mounting and tight
factors enhance or spacious
endurance and life installation spaces

2
 The Structure Anatomy

Disc Horn
Diaphragm
Point Armature
Vibrator

Air gap

Coil

Core

• Diaphragm
Thin, flexible metal membrane that creates the sound

• Armature
Connected to the diaphragm

• Solenoid Coil
To create the driving force

• Contact Point
Regulates current flow through the coil

• Vibrator (in disc horns)

Moves in a magnetic gap and vibrates to the
diaphragm to create sound by resonance

• Sound Chamber and Trumpet

(in fanfare horns)
Resonates the sound waves along the chamber wall

Fanfare Horn
Chamber Trumpet
Diaphragm
Point Armature

Air gap

Coil

Core
3
 The Kinetics Harmony in Motion

Armature
Point

Diaphragm
OFF

Switch On Battery
ON
Core

1 When horn is activated,

current flows through the
2 As the diaphragm and armature
move towards the core, the contact
3 The back and forth movement
of the armature and diaphragm
coil and forms a magnetic point disengages and stops the forms an even and rapid
field, drawing the armature current flow, causing the armature oscillation. This continuous
to the core. to spring back after striking the striking movement produces
core. This motion closes the circuit, the loud and sustained sound
thereby triggering the process again. of the horn.

The Construction of Sound

Stage Disc Horn Fanfare Horn Compressor Trumpet

• The armature collides • Diaphragm vibrates • Compressed air generated

with the core repeatedly via free produces alternating air
oscillation pressure states
• Sound is being
Sound generated by impact • Diaphragm design and • Diaphragm oscillation
Generation of repeated metallic trumpet length dictates results in an air column in
collisions pitch and timbre of sound trumpet

• Movement of air column

generates sound

• The vibrator creates • Trumpet resonates and • Trumpet resonates and

Sound sound by resonance amplifies the sound amplifies the sound
Amplification • Sound is amplified
by the tone disc

• Harsh metallic sound • Harmonic and fuller • Sound propagates in

travels in straight line sound propagates in fan-like pattern with
fan-like pattern high volume strength
• Sound is projected
forward • Sound reach is wider, • Wide sound reach
especially within near
radius
Sound
Propagation

4
 The Acoustics Highs & Lows

Short wavelength

Frequency
means lots of waves;
high frequency,
high-sound
Frequency refers to the number of oscillations
made by the diaphragm system per second. This
determines whether the tone is deep or
high-pitched. Frequency is measured in hertz (Hz);
1Hz corresponds to 1 oscillation per second.

If the oscillations are slow, frequency is low and

a deep tone results. If the oscillations are rapid,
frequency is high and a high tone is produced.

Long wavelength
means fewer waves;
low frequency,
low sound

Bosch offers a variety of tone and frequencies to suit your needs and preferences.

HI
LO
LO 840 Hz
HI 795 Hz
HI 630 Hz
LO 510 Hz
HI 500 Hz
HI 420 Hz
LO 400 Hz
LO 375 Hz
325 Hz
300 Hz

2-3 Tone
Air Fanfare
Europa H3F Digital EC9C
Supertone Fanfare Fanfare Wafer
Megatone

Windtone

Sound Pressure/Volume
Sound pressure and volume is measured in decibels (dB).
This relates to how far and fast the oscillating diaphragm
system is being deflected during horn activation.

The distance at which a sound can be heard depends on the

direction of the sound wave, the power, and the volume.

ECE standards call for all audible warning devices to have a

sound pressure of between 105 and 118 dB. All Bosch horns
have a sound pressure within this range.

5
 Frequently Asked Questions Technology

Why do Bosch horn products typically

come in a set of two horns?
A Bosch horn set comprises a high-tone and a low-tone horn.

A high-tone horn produces a more piercing sound. This enables

the signal to reach forward and farther. The low tone with a lower
frequency is better heard at close range.
Sound-Wave Propagation of a
set of horns with 2 frequencies Used together, the two horns maximise signal area coverage,
thus ensuring better safety.

How does Teflon Filter technology work?

The microporous Teflon filter serves two purposes:
• Pressure compensation: Allows air to pass through for
ventilation and to relieve the pressure buildup between the
device interior and the atmosphere

• Keeps out dirt and humidity: The pores of the filter are
designed to allow air through whilst repelling larger particles
such as dirt and water

What is the benefit of having corrosion resistance?

Corrosion resistance minimises the effects of wear and tear from
exposure to the environment, thereby maximising the horn‘s
performance and service life.

Bosch builds corrosion resistance into its horns by using:

• Special filter technologies such as the patented
Illustration of Teflon Filter Technology Teflon Filter Technology and Membrane Filter Technology

• Passivation and other finishing techniques

Small air particles Water, dust &

other large particles Why the need for EMC protection?
Electromagnetic interference occurs when multiple electronic devices
within the same electrical system interact together.

EMC protection (Electro-Magnetic Compatibility) minimises the

amount of electronic disturbance and interference to other electronic
components in the car, such as the ECU, in-car entertainment system,
navigation system, etc.

6
 Product Range Comparison 2-Wheeler

Premium

Avant Garde
Avant Bass Power

FC2 Disc
Compact

Piccolo

Aesthetic

FC4 Disc
Standard

Motorcycle Mini

OE Classic Legacy

Passenger Car & Light

Commercial Vehicles

Premium

Avant Garde Bass Power

Europa
H3F Supertone
EC9C Digital
Fanfare Fanfare
Wafer Megatone
EC6
FC2 Fanfare
Disc Compact
Compact

Aesthetic

2-3 Tone Airmaster

Air Fanfare

FD4 Disc Duty Windtone

FC4 Disc
Standard

OE Classic Legacy

* Product shown is not the actual size. 7

 Heavy Commercial Vehicles

Premium

Avant Garde Bass Power

Trucker

Windtone 24V

Europa
Supertone

Aesthetic

Airmaster
2-3 Tone
Air Fanfare

FD4 Disc Duty

OE Classic Legacy

Product Characteristics
DISC HORNS FANFARE HORNS COMPRESSOR TRUMPETS

Models H3F EC9C EC6 2-3 Tone

Europa Piccolo Megatone FC2 Disc Motorcycle FC4 Disc FD4 Disc Digital Fanafare Fanfare Windtone Trucker Air
Supertone Compact Mini Standard Duty Fanfare Wafer Compact Fanfare
Characteristics

Weather-Resistant
RESISTANCE FACTORS

Impact-Resistant

Corosion-Resistant

EMC protection

Teflon Filter
DESIGN & TUNING FACTORS

Compact Design

Serviceable

Extra-high Durability

Privileged Vehicles

Suitable for external mounting

* Mini option available

** Refer to product page for more details

8
 fights above weight class

Disc Horns
Produces a metallic "beep" sound with high sound pressure
level and far-reaching penetrating power

9
 Premium
Europa Supertone Euro-Style Solution

• For privileged vehicles or other

special uses

• Low bassy supertone for use

with wide range of vehicle types

• *Suitable for privileged vehicles

or other special uses

• Micro-porous Teflon Filter for

pressure compensation

• Weather-, impact- and corrosion-

resistant

• With EMC protection

Check with your dealer for more information.

Ø 140 84 86
24
65

10,5 2,4 2,4

11

23 72 74

DECORATIVE DECORATIVE
RING GRILL

Design 1
OUR RECOMMENDATION

VEHICLE APPLICATION

Options 2

Black 12V Set; 2 horns • 300 Hz / 375 Hz 0 986 AH0 210

Decorative
Ring 12V comprisingof 1 high • 300 Hz / 375 Hz
0 320 223 911
Silver tone & 1 low tone
24V • 300 Hz / 375 Hz 0 986 AH0 211

Black 12V Set; 2 horns • 300 Hz / 375 Hz 0 320 223 910

Decorative
Grill comprisingof 1 high
Chrome 24V tone & 1 low tone • 300 Hz / 375 Hz 0 986 AH0 213
24V • 300 Hz / 375 Hz 0 986 AH0 212

* High-frequency options available – 375 Hz / 500 Hz

For privileged vehicles or other special uses

For more options and available part numbers, please refer to the Appendix 10
 Your Enduring
Piccolo Travel Companion

• High-grade copper wire material

for better electromagnetic power

• High-strength nylon shell provides

improved performance stability

• High durability with enhanced

life service

• Corrosion-resistant

Check with your dealer for more information.

2-6.3
Ø69.8

15

35
60

000
14

Ø6.5
2

6.5
0.7X2 30±2
22
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

6V • 420 Hz 0 986 AH0 713

Black Single Horn
12V • 420 Hz 0 986 AH0 712

For more options and available part numbers, please refer to the Appendix

11
 Announcer with
Megatone Powerful Bass Tone

• Supertone horn with large

diaphragm for dynamic sound
power and signal range

• Chromium-plated protective
grill for impact resistance

• Corrosion-resistant

• Suitable for external mounting

and off-road applications

Check with your dealer for more information.

91 25

11 Ø8,5

10
75
Ø156
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Set; 2 horns
Silver 12V comprising of 1 high • 325 Hz / 400 Hz 0 986 AH0 203
tone & 1 low tone

For more options and available part numbers, please refer to the Appendix

12
 Full Function in
FC2 Disc Compact Compact Package

50 ±2

M6
±0,1
77 ±1

• Small and compact

25,9

• Easy installation in tight spaces

60

• Dirt- and humidity-resistant with Ø 8

,3
˙
90

Membrane Filter Technology

• Corrosion-resistant

22 1 ±0.03
Check with your dealer for more information.
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Set; 2 horns
Black 12V comprising of 1 high • 350 Hz / 420 Hz 0 986 AH0 103
tone & 1 low tone

For more options and available part numbers, please refer to the Appendix

13
 Motorcycle Mini Easy Rider

• Includes a serviceable component

• Can be adjusted and tuned to

achieve desired tone output

• Corrosion-resistant

Check with your dealer for more information.

±1.0
19.0 ±2.0
±0.5
Ø8.5 0.8 x2Nos
±1.0
10.0
±2.0

±5°
90°
52.0

±2.0
Ø72.0

44.0 max
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

6V • 430 Hz 0 986 AH0 002

Black Single Horn
12V • 430 Hz 0 986 AH0 003

For more options and available part numbers, please refer to the Appendix

14
 The All-Weather
FC4 Disc Standard Disc Horn

• Solid mechanical construction

for greater durability

• Wide range of mounting &

angle options

• Micro-porous Teflon filter

for pressure compensation

• Weather, impact and

corrosion resistant

• With EMC protection

Check with your dealer for more information.

60 Ø96
60
12

Øb

a 23
OUR RECOMMENDATION

Design
VEHICLE APPLICATION

1
Options 2

Standard 6V (6V) Single Horn • 335 Hz 0 986 320 101

Steel
12V (12V) Set; 2 horns
• 335 Hz / 420 Hz 0 986 320 191
(Single Point
Mounting) 6V comprising of 1 high • 335 Hz 0 986 320 102
Black tone & 1 low tone
12V • 335 Hz / 420 Hz 0 986 AH0 192

3-Point Single horn with

Mounting Black 12V 3-point type connection • 335 Hz 0 986 320 110
for mounting

For more options and available part numbers, please refer to the Appendix

15
 All-Round
FD4 Disc Duty Commerical Use

• Solid mechanical construction

for greater durability

• Weather- and impact-resistant

• Corrosion-resistant

• With EMC protection

• Suitable for external mounting

and off-road applications

Check with your dealer for more information.

60 Ø112
α 71 Ø115
60

˚
60
60
12

1,6 ,4
a Øb Ø8 23
23
12

STANDARD DECORATIVE GRILL

Design
OUR RECOMMENDATION

1
VEHICLE APPLICATION

Options 2

12V Set; 2 horns • 335 Hz / 420 Hz 0 986 320 392

Steel + Grey 24V
Standard comprising of 1 high • 335 Hz / 420 Hz 0 986 320 394
tone & 1 low tone
Black 24V • 335 Hz / 420 Hz 0 986 AH0 193

Decorative Set; 2 horns

Steel+
Grill 12V comprising of 1 high • 335 Hz / 420 Hz 0 986 320 393
Black Grill
tone & 1 low tone

For more options and available part numbers, please refer to the Appendix

16
 mellowed brilliance

Fanfare Horns
Produces a soft timbre and mellow sound for a more harmonic
experience. Larger fanfares give full-bodied and more robust
harmonics with a wider sound spectrum.

17
 The Power
H3F Digital Fanfare of Digital

• Microchip technology for enhanced

sound quality and low sound sensitivity

• Up to 10 times longer service life

• Stable sound properties even with

long continuous honking

• Resistant to environmental fluctuations

• Corrosion-resistant with
Nano-Filter technology

• With EMC protection

Check with your dealer for more information.

78 88

.5
Ø8
6.3

XXX
112

OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Set; 2 horns
Black 12V comprising of 1 high • 420 Hz / 500 Hz 0 986 AH0 601
tone & 1 low tone

For more options and available part numbers, please refer to the Appendix

18
 The Ultrathin
EC9C Fanfare Wafer Travel Mate

• Ultra-thin, ultra-lightweight
electro-pneumatic fanfare

• Vertical mounting for forward

sound propagation and reduced
water-pooling

• Micro-porous Teflon filter for

pressure compensation

• Impact- and corrosion-resistant

• With EMC protection

Check with your dealer for more information.

56 8,6

1,6
23
15
Ø8,4

α
12
60

24
52,5

93

55
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Chrome 12V Set; 2 horns • 420 Hz / 510 Hz 6 033 FB1 510

comprising of 1 high
Black 12V tone & 1 low tone • 420 Hz / 510 Hz 9 320 335 206

For more options and available part numbers, please refer to the Appendix

19
 The Compact
EC6 Fanfare Compact Broadcaster

• Compact, lightweight fanfare

with wide sound propagation

• Easy installation in limited spaces

• Dirt- and humidity-resistant with

Membrane Filter Technology

• Corrosion-resistant

Check with your dealer for more information.

60

25.9 ± 0.1 1 ± 0.03

Ø8.3
M6
22

85 ± 1

86 ± 1.5
82 ±2
90˚
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Set; 2 horns
Black 12V comprising of 1 high • 400 Hz / 500 Hz 0 986 AH0 403
tone & 1 low tone

For more options and available part numbers, please refer to the Appendix

20
 The All-Round
Windtone Fanfare

• Economical fanfare option

• Large trumpet for enhanced

sound propagation

• Corrosion-resistant

• With EMC protection

Check with your dealer for more information.

22

Ø 8.7 2 84
11
65

101

Ø 95

114
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Red 12V Set; 2 horns • 420 Hz / 500 Hz 0 986 AH0 507

comprising of 1 high
Black 12V tone & 1 low tone • 420 Hz / 500 Hz 0 986 AH0 503

For more options and available part numbers, please refer to the Appendix

21
 Fanfare for the
Windtone 24V Commercial Vehicle

• Economical fanfare option

• Large trumpet for enhanced sound

propagation

• Anti-corrosion protection

• Electrophoretic processing coating

• Suitable for light duty vehicle, buses

and trucks

Check with your dealer for more information.

OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Sets of 2 horns,
Black 24V 1 High tone, • 410 Hz / 510 Hz 0 986 AH0 454
1 Low tone

For more options and available part numbers, please refer to the Appendix

22
 goes far & wide

Compressor Trumpets
Generates high-volume output that produces
a penetrating signal with wide sound reach

23
 Compact and
Air Master Powerful Air Horn

• For privileged vehicles or other special uses

• Ideal for large trucks and HCVs with

built in compressor

• Perfect balance of air compressor system

projecting loud and powerful sound

• Harmonic two-toned sound with loud

propagation

• Compact and easy installation

Check with your dealer for more information.

136+
–2
+2
6–
–2
91+
–2
115+

1
OUR RECOMMENDATION

VEHICLE APPLICATION

12V • 520 Hz/ 660 Hz 0 986 320 400

Single horn with 2
Black with trumpet of high
Red and low tone
24V • 520 Hz/ 660 Hz 0 986 320 401

For more options and available part numbers, please refer to Appendix

24
 The Classic Choice
Trucker for Trucks

• Ideal for large trucks and HCVs

with built-in compressed-air system

• Penetrating two-tone signal with

wide sound reach

• Secure installation with fixed

anchorage

• Impact- and corrosion-resistant

• Suitable for external mounting

Check with your dealer for more information.

436,4

387,4
388,4
84

159
123,5

78

64

347,4
OUR RECOMMENDATION

VEHICLE APPLICATION

1
2

Single horn with 2

Chrome 5 - 8 bar trumpets of varying • 300 Hz / 320 Hz 0 328 100 002
tones

To be fitted on floor of
Foot Valve driver’s cabin; operated 1 327 011 003
ACCESSORY

by foot pressure

Protects connections
Protective against dirt and moisture 3 340 552 025
Cap for better weather resistance

For more options and available part numbers, please refer to the Appendix
25
 Announce
2-3 Tone Air Fanfare Your Presence

• Compressor fanfare with fast

response time

• High frequency with large capacity

and wide sound propagation
aX
• Easy installation with two-hole
mounting and blade terminal
112

• Weather- and impact-resistant

76

• Compressor unit inclusive

Check with your dealer for more information. Ø49

Design 1
OUR RECOMMENDATION

VEHICLE APPLICATION

Options 2

Mini 2-tone Red 12V • 735 Hz / 785 Hz 0 986 320 003

2 trumpets with
varying tones, and
12V a compressor unit • 630 Hz / 795 Hz 0 328 003 024
2-tone Red 24V • 630 Hz / 795 Hz 0 328 006 002

3 trumpets with
3-tone Red varying tones, and • 630 Hz / 795 Hz 0 328 003 025
12V
a compressor unit /840 Hz

For more options and available part numbers, please refer to Appendix

26
 Universal Backup
Backup Buzzer Beeper Warning Alarm

• Activated as soon as the reverse gear is

engaged

• Comes in 2 options: Fixed sound pressure

level and self adjusting

• Suitable for commercial vehicles,

construction vehicles, cranes and fork
lift truck

Check with your dealer for more information.

Design Options 1
OUR RECOMMENDATION

VEHICLE APPLICATION

Fixed sound Black 3.5V – 30V Single piece High pulse tone 0 986 334 001
pressure

Self adjusting Black 9 – 28V Single piece High pulse tone 0 986 334 002
sound pressure

For more options and available part numbers, please refer to Appendix

27
Application Summary

28
 Design
Europa 1
OUR RECOMMENDATION

VEHICLE APPLICATION
Options 2

Black 12V Set; 2 horns • 300 Hz / 375 Hz 0 986 AH0 210

Decorative
Ring 12V comprising of 1 high tone • 300 Hz / 375 Hz 0 320 223 911
Silver & 1 low tone
24V • 300 Hz / 375 Hz 0 986 AH0 211

Black 12V Set; 2 horns • 300 Hz / 375 Hz 0 320 223 910

Decorative
Grill comprising of 1 high tone
24V • 300 Hz / 375 Hz 0 986 AH0 213
Chrome & 1 low tone
24V • 300 Hz / 375 Hz 0 986 AH0 212
OUR RECOMMENDATION

VEHICLE APPLICATION
1
Piccolo 2

16V • 420 Hz 0 986 AH0 713

Black Single Horn
12V • 420 Hz 0 986 AH0 712
OUR RECOMMENDATION

VEHICLE APPLICATION
Megatone 1
2

Set; 2 horns
Silver 12V comprising of 1 high tone • 325 Hz / 400 Hz 0 986 AH0 203
& 1 low tone
OUR RECOMMENDATION

VEHICLE APPLICATION
FC2 Disc 1
Compact 2

Set; 2 horns
Black 12V comprising of 1 high tone • 350 Hz / 420 Hz 0 986 AH0 103
& 1 low tone
OUR RECOMMENDATION

VEHICLE APPLICATION

Motorcycle 1
Mini 2

6V • 430 Hz 0 986 AH0 002

Black Single Horn
12V • 430 Hz 0 986 AH0 003

FC4 Disc
OUR RECOMMENDATION

Design 1
VEHICLE APPLICATION

Standard Options 2

Standard 6V (6V)Single Horn • 335 Hz 0 986 320 101

Steel • 335 Hz / 420 Hz 0 986 320 191
12V (12V)Set; 2 horns
(Single Point comprising of 1 high
6V • 335 Hz 0 986 320 102
Mounting) Black tone & 1 low tone • 335 Hz / 420 Hz 0 986 AH0 192
12V
Single horn with
3-Point
Black 12V 3-point type connection • 335 Hz 0 986 320 110
Mounting
for mounting

FD4 Disc Design 1

OUR RECOMMENDATION

VEHICLE APPLICATION

Duty Options 2

12V Set; 2 horns • 335 Hz / 420 Hz 0 986 320 392

Standard Steel +Grey 24V • 335 Hz / 420 Hz
comprising of 1 high tone 0 986 320 394
& 1 low tone
Black 24V • 335 Hz / 420 Hz 0 986 AH0 193
Set; 2 horns
Decorative Steel +
12V comprising of 1 high tone • 335 Hz / 420 Hz 0 986 320 393
Grill Black Grill
& 1 low tone

29
OUR RECOMMENDATION

VEHICLE APPLICATION
H3F Digital 1
Fanfare 2

Set; 2 horns
Black 12V comprising of 1 high tone • 420 Hz / 500 Hz 0 986 AH0 601
& 1 low tone
OUR RECOMMENDATION

VEHICLE APPLICATION
EC9C Fanfare 1
Wafer 2

Chrome 12V Set; 2 horns • 420 Hz / 510 Hz 6 033 FB1 510

comprising of 1 high tone
Black 12V & 1 low tone • 420 Hz / 510 Hz 9 320 335 206
OUR RECOMMENDATION

VEHICLE APPLICATION
EC6 Fanfare 1
Compact 2

Set; 2 horns
Black 12V comprising of 1 high tone • 400 Hz / 500 Hz 0 986 AH0 403
& 1 low tone
OUR RECOMMENDATION

VEHICLE APPLICATION
Windtone 1
2

Red 12V Set; 2 horns • 420 Hz / 500 Hz 0 986 AH0 507

comprising of 1 high tone
Black & 1 low tone • 420 Hz / 500 Hz 0 986 AH0 503
12V
OUR RECOMMENDATION

VEHICLE APPLICATION
Trucker 1
2

Single horn with

Chrome 5 - 8 bar 2 trumpets of • 300 Hz / 320 Hz 0 328 100 002
varying tones

2-3 Tone
OUR RECOMMENDATION

Design 1
VEHICLE APPLICATION

Air Fanfare Options 2

Mini 2-tone Red 12V 2 trumpets with • 735 Hz / 785 Hz 0 986 320 003
varying tones, and
12V a compressor unit • 630 Hz / 795 Hz 0 328 003 024
2-tone Red
24V • 630 Hz / 795 Hz 0 328 006 002

3 trumpets with varying • 630 Hz / 795 Hz /

3-tone Red 12V tones, and a compressor unit 0 328 003 025
840 Hz
OUR RECOMMENDATION

Fanfare
VEHICLE APPLICATION

1
Windtone 24V 2

Sets of 2 horns,
Black 24V 1 High tone, • 410 Hz / 510 Hz 0 986 AH0 454
1 Low tone

Fanfare
VEHICLE APPLICATION
OUR RECOMMENDATION

1
Air Master 2

12V • 520 Hz/ 660 Hz 0 986 320 400

Single horn with
Black with Red 2 trumpet of high
and low tone
24V • 520 Hz/ 660 Hz 0 986 320 401

30
 Appendix Disc Horns

Europa Supertone

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Decorative Black 12V Single Low tone horn 300 Hz 0 320 223 804
Grill
Black 12V Single High tone horn 375 Hz 0 320 223 805
Black 12V Set Comprising of 0 320 223 804 300 Hz/ 0 320 223 910
and 0 320 223 805 375 Hz
Chrome 12V Single Low tone horn 300 Hz 0 320 223 144
Chrome 12V Single High tone horn 375 Hz 0 320 223 145
Chrome 12V Set Comprising of 0 320 223 144 300 Hz/ 0 986 AH0 212
and 0 320 223 145 375 Hz
Black 24V Single Low tone horn 300 Hz 0 320 226 004
Black 24V Single High tone horn 375 Hz 0 320 226 005
Black 24V Set Comprising of 0 320 226 004 300 Hz/ 0 986 AH0 213
and 0 320 226 005 375 Hz

Decorative Black 12V Single Low tone horn 300 Hz 0 320 223 024
Plastic Grill
Black 12V Single High tone horn 375 Hz 0 320 223 025

Decorative Black 12V Single Low tone horn 300 Hz 0 320 223 027
Ring
Black 12V Single High tone horn 375 Hz 0 320 223 028
Black 12V Set Comprising of 0 320 223 027 300 Hz/ 0 986 AH0 210
and 0 320 223 028 375 Hz
Silver 12V Single Low tone horn 300 Hz 0 320 223 016
Silver 12V Single High tone horn 375 Hz 0 320 223 017
Silver 12V Set Comprising of 0 320 223 016 300 Hz/ 0 320 223 911
and 0 320 223 017 375 Hz
Silver 24V Single Low tone horn 300 Hz 0 320 226 016
Silver 24V Single High tone horn 375 Hz 0 320 223 017
Silver 24V Set Comprising of 0 320 226 016 300 Hz/ 0 986 AH0 211
and 0 320 226 017 375 Hz

*Decorative Silver 12V Single Low tone horn for special 375 Hz 0 320 223 008
Ring priority vehicles
(for priority
vehicles e.g. Silver 12V Single High tone horn for special 500 Hz 0 320 223 009
police, priority vehicles
ambulance, fire
engines, etc.) Black 12V Single Low tone horn for special 375 Hz 0 320 223 002
priority vehicles
Black 12V Single High tone horn for special 500 Hz 0 320 223 003
priority vehicles
Black 24V Single Low tone horn for special 375 Hz 0 320 226 002
priority vehicles
Black 24V Single High tone horn for special 500 Hz 0 320 226 003
priority vehicles

31
 Appendix Disc Horns

Europa Supertone

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Standard Black/ 12V Single Low tone horn 300 Hz 0 320 223 021
Silver
Black/ 12V Single High tone horn 375 Hz 0 320 223 022
Silver
Black 12V Single Connection Type B* 375 Hz 0 320 223 011
Black 12V Single Connection Type B** 500 Hz 0 320 223 012
Black/ 24V Single Low tone 300 Hz 0 320 226 007
Silver
Black/ 24V Single Medium-high tone* 375 Hz 0 320 226 008
Silver
Black/ 24V Single High tone* 500 Hz 0 320 226 009
Silver
Black 24V Single Medium-high tone* 375 Hz 0 320 226 010
Black 24V Single Connection Type B** 375 Hz 0 320 226 011
Black 24V Single Connection Type B** 500 Hz 0 320 226 012

*Applicable for special priority vehicles such as police vehicles, fire-engines, ambulances etc
**With connection Type B; All other part numbers, unless indicated otherwise, belong to Type A

Connection Types for Europa Supertone

Connection Type A Connection Type B

FC2 Disc Compact

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 12V Single Low tone horn 350 Hz 0 986 AH0 101
Black 12V Single High tone horn 420 Hz 0 986 AH0 102
Black 12V Set Comprising of 0 986 AH0 101 350 Hz/ 0 986 AH0 103
and 0 986 AH0 102 420 Hz

32
 Appendix Disc Horns

FC9

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Steel 12V Single Low tone horn 335 Hz 9 320 332 803
Steel 12V Single High tone horn 420 Hz 9 320 332 804
Steel 12V Set Comprising of 9 320 332 803 335 Hz/ 9 320 332 802
and 9 320 332 804 420 Hz
Steel 24V Single Low tone horn 335 Hz 6 033 FB4 102
Steel 24V Single High tone horn 420 Hz 6 033 FB4 103
Steel 24V Set Comprising of 6 033 FB4 102 335 Hz/ 6 033 FB4 147
and 6 033 FB4 103 420 Hz

FC4 Disc Standard

Design Colour Voltage Unit *Mounting *Mounting *Mounting Unit Description Frequency Part Number
Plate Hole Angle
Thickness Diameter (α˚)
(a mm) (Øb mm)

Standard Steel 6V Single 2.4 mm Thread M8 275˚ Type A Connection** 335 Hz 0 986 320 101
Black 6V Single 1.6 mm 8.4 mm 175˚ Type A Connection** 335 Hz 0 986 320 102
Steel 12V Single 2.4 mm Thread M8 90˚ Type A Connection** 335 Hz 0 986 320 111
Steel 12V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 335 Hz 0 986 320 132
Steel 12V Single 1.6 mm 8.4 mm 300˚ Type A Connection** 420 Hz 0 986 320 133
Steel 12V Set 1.6 mm 8.4 mm - 0 986 320 132 and 335 Hz/ 0 986 320 191
0 986 320 133 420 Hz
Steel 12V Single 1.6 mm 8.4 mm 275˚ Type A Connection** 335 Hz 0 986 320 146
Steel 12V Single 1.6 mm 10.5 mm 90˚ Type A Connection** 335 Hz 0 986 320 112
Steel 12V Single 1.6 mm 8.4 mm 90˚ Type A Connection** 420 Hz 0 986 320 147
Steel 12V Single 2.4 mm 8.7 mm 100˚ Type A Connection** 420 Hz 0 986 320 140
Black 12V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 335 Hz 0 986 320 137
Black 12V Single 2.4 mm 8.4 mm 100˚ Type A Connection** 335 Hz 0 986 320 188
Black 12V Single 2.4 mm 8.4 mm 300˚ Type A Connection** 335 Hz 0 986 320 131
Black 12V Single 1.6 mm 8.4 mm 285˚ Type B Connection** 335 Hz 0 986 320 148
Black 12V Single 1.6 mm 8.4 mm 180˚ Type A Connection** 335 Hz 0 986 320 113
Black 12V Single 1.6 mm 8.4 mm 300˚ Type A Connection** 335 Hz 0 986 320 136
Black 12V Single 2.0 mm 8.4 mm 60˚ Type C Connection** 335 Hz 0 986 320 110
Black 12V Single 1.6 mm 8.4 mm 270˚ Type A Connection** 420 Hz 0 986 320 114
Black 12V Set 1.6 mm 8.4 mm - 0 986 320 137 and 335 Hz/ 0 986 AH0 192
0 986 320 114 420 Hz
Black 12V Single 1.6 mm 8.4 mm 285˚ Type B Connection** 420 Hz 0 986 320 149

*Refer to technical drawing and dimensions on FC4 Disc Standard product page
**Refer to Connection Type drawing for FC4 and FD4 horns on page 31

33
 Appendix Disc Horns

FD4 Disc Duty

Design Colour Voltage Unit *Mounting *Mounting *Mounting Unit Description Frequency Part Number
Plate Hole Angle
Thickness Diameter (α˚)
(a mm) (Øb mm)

Standard Steel 12V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 335 Hz 0 986 320 310
Steel 12V Single 1.6 mm 8.4 mm 300˚ Type A Connection** 420 Hz 0 986 320 311
Steel 12V Set 1.6 mm 8.4 mm - Comprising of 335 Hz/ 0 986 320 392
0 986 320 310 420 Hz
and 0 986 320 311
Steel 24V Single 1.6 mm 8.4 mm 270˚ Type A Connection** 335 Hz 0 986 320 301
Steel 24V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 420 Hz 0 986 320 302
Steel 24V Set 1.6 mm 8.4 mm - Comprising of 335 Hz/ 0 986 320 394
0 986 320 301 420 Hz
and 0 986 320 302
Black 24V Single 1.6 mm 8.4 mm 270˚ Type A Connection** 335 Hz 0 986 320 317
Black 24V Single 2.4 mm 8.4 mm 90˚ Type A Connection** 335 Hz 0 986 320 314
Black 24V Single 2.4 mm 10.5 mm 155˚ Type B Connection** 335 Hz 0 986 320 312
Black 24V Single 2.4 mm 8.4 mm 270˚ Type A Connection** 335 Hz 0 986 320 351
Black 24V Single 2.4 mm 8.4 mm 60˚ Type A Connection** 420 Hz 0 986 320 316
Black 24V Set 2.4 mm 8.4 mm - Comprising of 335 Hz/ 0 986 AH0 193
0 986 320 351 420 Hz
and 0 986 320 316
Black 24V Single 2.4 mm 8.4 mm 155˚ Type B Connection** 420 Hz 0 986 320 313
Decorative Steel/ 12V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 335 Hz 0 986 320 306
Grill Black
Steel/ 12V Single 1.6 mm 8.4 mm 60˚ Type A Connection** 420 Hz 0 986 320 307
Black
Steel/ 12V Set 1.6 mm 8.4 mm - Comprising of 335 Hz/ 0 986 320 393
Black 0 986 320 351 420 Hz
and 0 986 320 316

*Refer to technical drawing and dimensions on FD4 Disc Duty product page
**Refer to Connection Type drawing for FC4 and FD4 horns below

Connection Types for FC4 and FD4 horns

Type A Type B Type C

34
 Appendix Disc Horns

Megatone
FD4
Design Option Colour Voltage Unit Unit Frequency Part Number
Quantity Description

Silver 12V Single Low tone horn 325 Hz 0 986 AH0 201
Silver 12V Single High tone horn 400 Hz 0 986 AH0 202
Silver 12V Set Comprising of 0 986 AH0 201 325 Hz/ 0 986 AH0 203
and 0 986 AH0 202 400 Hz

Motorcycle Mini

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 6V Single Single horn 430 Hz 0 986 AH0 002

Black 12V Single Single horn 430 Hz 0 986 AH0 003

Piccolo

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 6V Single Single horn 420 Hz 0 986 AH0 713

Black 12V Single Single horn 420 Hz 0 986 AH0 712

35
 Appendix Fanfare Horns

EC6 Fanfare Compact

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 12V Single Low tone horn 325 Hz 0 986 AH0 401
Black 12V Single High tone horn 400 Hz 0 986 AH0 402
Black 12V Set Comprising of 0 986 AH0 401 325 Hz/ 0 986 AH0 403
and 0 986 AH0 402 400 Hz

EC9

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

*Painted Black 12V Single Low tone horn 420 Hz 6 033 FB1 213
Housing
Black 12V Single High tone horn 510 Hz 6 033 FB1 214
Black 12V Set Comprising of 6 033 FB1 213 420 Hz/ 6 033 FB1 217
and 6 033 FB1 214 510 Hz

*Galvanised Black 12V Single Low tone horn 420 Hz 6 033 FB2 011
Housing
Black 12V Single High tone horn 510 Hz 6 033 FB2 012
Black 12V Set Comprising of 6 033 FB2 011 420 Hz/ 9 320 335 007
and 6 033 FB2 012 510 Hz
Red 12V Single Low tone horn 420 Hz 9 320 335 111
Red 12V Single High tone horn 510 Hz 9 320 335 112
Red 12V Set Comprising of 9 320 335 112 420 Hz/ 9 320 335 113
and 9 320 335 113 510 Hz
Chrome 12V Single Low tone horn 420 Hz 6 033 FB1 194
Chrome 12V Single High tone horn 510 Hz 6 033 FB1 195
Chrome 12V Set Comprising of 6 033 FB1 194 420 Hz/ 6 033 FB1 193
and 6 033 FB1 195 510 Hz
Black - Set Conmprising of relays, small - 9 320 335 052
parts and mounting instructions

EC9C Fanfare Wafer

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 12V Single Low tone horn 420 Hz 9 320 335 207
Black 12V Single High tone horn 510 Hz 9 320 335 208
Black 12V Set Comprising of 9 320 335 207 420 Hz/ 9 320 335 206
and 9 320 335 208 510 Hz
Chrome 12V Single Low tone horn 420 Hz 6 033 FB1 505
Chrome 12V Single High tone horn 510 Hz 6 033 FB1 506
Chrome 12V Set Comprising of 6 033 FB1 505 420 Hz/ 6 033 FB1 510
and 6 033 FB1 506 510 Hz

36
 Appendix Fanfare Horns

H3F Digital Fanfare

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 12V Single Low tone horn 400 Hz 0 986 AH0 761
Black 12V Single High tone horn 500 Hz 0 986 AH0 762
Black 12V Set Comprising of 0 986 AH0 761 400 Hz/ 0 986 AH0 601
and 0 986 AH0 762 500 Hz

Windtone

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 12V Single Low tone horn 420 Hz 0 986 AH0 501
Black 12V Single High tone horn 500 Hz 0 986 AH0 502
Black 12V Set Comprising of 0 986 AH0 761 420 Hz/ 0 986 AH0 503
and 0 986 AH0 762 500 Hz
Red 12V Single Low tone horn 420 Hz 0 986 AH0 505
Red 12V Single High tone horn 500 Hz 0 986 AH0 506
Red 12V Set Comprising of 0 986 AH0 761 420 Hz/ 0 986 AH0 507
and 0 986 AH0 762 500 Hz

Windtone 24V

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black 24V Single Low Tone 410 Hz 0 986 AH0 456

Black 24V Single High Tone 510 Hz 0 986 AH0 455
Black 24V Set Comprising of 0 986 AH0 455 410 Hz/ 0 986 AH0 454
and 0 986 AH0 456 510 Hz

Air Master

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Black with 12V Single Single horn with 520 Hz/ 0 986 320 400
Red 2 trumpet of high 660 Hz
and low tone

Black with 24V Single Single horn with 520 Hz/ 0 986 320 401
Red 2 trumpet of high 660 Hz
and low tone

37
 Appendix Compressor Trumpets

Trucker

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Chrome - Single Low tone horn 300 Hz/ 0 328 100 002
320 Hz

2-3 Tone Air Fanfare

Design Option Colour Voltage Unit Unit Frequency Part Number

Quantity Description

Mini 2-tone Red 12V Single 2 trumpets with varying tones 795 Hz/ 0 986 320 003
and a compressor unit 840 Hz

2-tone Red 12V Single 2 trumpets with varying tones 630 Hz/ 0 328 003 024
and a compressor unit 795 Hz
Red 24V Single 2 trumpets with varying tones 630 Hz/ 0 328 006 002
and a compressor unit 795 Hz

3-tone Red 12V Single 2 trumpets with varying tones 630 Hz/ 0 328 003 025
and a compressor unit 795 Hz/
840 Hz

Appendix Backup Buzzer

Backup Buzzer

Design Option Colour Voltage Unit Unit Part Number

Quantity Description

Fixed sound Black 24V Single High pulse tone 0 986 334 001
pressure

Self adjusting Black 24V Single High pulse tone 0 986 334 002
sound
pressure

38
 AA/MKI2 AP / 201612

Robert Bosch (SEA) Pte Ltd

11 Bishan Street 21
Singapore 573943
Tel: (65) 65712111
www.bosch.com.sg

Authorised Dealer