MAN

Marine Engine
(herein referred to as “MAN Diesel & Turbo”).

registered with the Danish Commerce and Companies Agency under CVR Nr.: 31611792,
Copyright 2011 © MAN Diesel & Turbo, branch of MAN Diesel & Turbo SE, Germany,
MAN Diesel & Turbo Marine Engine IMO Tier ll Programme 3rd edition
IMO Tier ll
Programme 3rd edition 2011
This document is the product and property of MAN Diesel & Turbo
and is protected by applicable copyright laws.
Subject to modification in the interest of technical progress.
Reproduction permitted provided source is given.
4510-0009-02ppr May 2011
2011
All data provided in this document is non-binding. This data serves infor-
mational purposes only and is especially not guaranteed in any way.
Depending on the subsequent specific individual projects, the relevant

data may be subject to changes and will be assessed and determined
individually for each project. This will depend on the particular character-
istics of each individual project, especially specific site and operational
conditions.
If this document is delivered in another language than English and doubts

arise concerning the translation, the English text shall prevail.
Contents
MAN B&W Low Speed Propulsion Engines 5 – 52
MAN B&W Low Speed Propulsion Systems 53 – 58
MAN Medium Speed Propulsion Engines 59 – 82
MAN Medium Speed Offshore and

83 – 94
Marine GenSets
S.E.M.T. Pielstick Medium Speed

95 – 98
Propulsion Engines
MAN Medium Speed Propulsion Systems 99 – 108
MAN Exhaust Gas Turbochargers 109 – 118
Licensees 120 – 125
World Wide Offices 126 – 130
Branch Offices 131 – 133
Main Locations 134 – 135
3
DieselPort
DieselPort is MAN Diesel & Turbo’s customer extranet. A secure

online platform of document sharing and collaboration between
employees, customers, partners and suppliers. Sign up for a
userID and password on https://dieselport.mandiesel.com.
MAN B&W Low Speed
Propulsion engines
6
MAN B&W Low Speed Propulsion Engines
MAN Diesel & Turbo Tier II Engine Programme
The engines in this programme all comply with IMO’s Tier II emissions.
ME Programme
The electronic control of ME/ME-C/-GI engines includes the combustion
process, i.e. fuel injection timing, actuation of exhaust valves and starting
valves, and cylinder lubrication. On ME-B/-GI engines, the combustion pro-
cess is electronically controlled while the actuation of exhaust valves and
starting valves is hydraulically, respectively mechanically controlled.
The advantages of ME engines are:
fuel optimised over a wide power range

improved cylinder lube oil consumption
improved low-load running
adaptation to different fuel oil qualities
better part- and low-load effiency.
As a standard integrated feature, ME engines are specified with MAN B&W

Alpha Lubricators.
GI Dual Fuel Engines

All ME/ME-C/ME-B engines are available for natural gas operation
as dual fuel engines with high-pressure gas injection, designated -GI
(Gas Injection). Power, speed and gross efficiency are the same as for the
corresponding ME-C engines.
MC Programme
MAN B&W two-stroke MC/MC-C engines are characterised by having
mechanically driven camshaft-controlled fuel pumps.
VIT (Variable Injection Timing) fuel pumps are MAN Diesel & Turbo’s recom-
mended standard on mechanically controlled MC/MC-C Tier II engines with
50 bore and above. The engine’s maximum firing pressure can be con-
trolled accordingly to ensure optimum combination of NO x and SFOC can
be obtained at all loads.
7
Other MAN B&W Tier II Engines
Earlier versions of this engine programme have mentioned key figures for
‘Other MAN B&W Tier II engines’. Those engine types are still available.
However, new development will only be implemented in these designs to
the extent considered necessary based on service experience. New ef-
ficiency enhancing features and SFOC guarantee down to 50% load will not
be available on older engine types.
Engine Power
The engine brake power is stated in kW.
The power values stated in the tables are available up to tropical conditions
at sea level, i.e.:
blower inlet temperature 45 °C

blower inlet pressure 1,000 mbar
seawater temperature 32 °C
Specific Fuel Oil Consumption (SFOC)

The figures given in this folder represent the values obtained when the en-
gine and turbocharger are matched the lowest possible SFOC values while
also fulfilling the IMO NO x Tier II emission limitations.
Stricter emission limits can be met on request, using proven technologies.
The SFOC figures are given in g/kWh, and are based on the use of fuel
with a calorific value lower than 42,700 kJ/kg (~10,200 kcal/kg) at ISO
conditions:
ambient air pressure 1,000 mbar

ambient air temperature 25 °C
cooling water temperature 25 °C
Most commercially available HFO with a viscosity below 700 cSt at 50 °C

can be used.
8
The Energy Efficiency Design Index (EEDI) has increased the focus on part-
load SFOC. We therefore offer the option of selecting the SFOC guarantee
at a load point in the range between 50% and 100%.
All engine design criteria, e.g. heat load, bearing load and mechanical
stresses on the construction are defined at 100% load independent of the
guarantee point selected. This means that turbocharger matching, engine
adjustment and engine load calibration must also be performed at 100%
independent of guarantee point. At 100% load, the SFOC tolerance is 5%.
When choosing an SFOC guarantee below 100%, the tolerances, which

were previously compensated for by the matching, adjustment and calibra-
tion at 100%, will affect engine running at the lower SFOC guarantee load
point. This includes tolerances on measurement equipment, engine pro-
cess control and turbocharger performance.
Consequently SFOC guarantee tolerances are as follows:
1
00% – 85%: 5% tolerance
84% – 65%: 6% tolerance
64% – 50%: 7% tolerance
Please note that the SFOC guarantee can only be given in one (1) load
point.
9
Layout Diagram
The layout diagram applicable for the engines is Power L1
defined by the power and speed combinations
L1 - L 2 - L 3 and L 4, with L1 indicating the nominal L3
MCR. L2
Any combination of speed and power within the L4

layout diagram may be used for selecting the Speed
specified MCR point.
G80ME-C9 and G50ME-B9 Available at Increased Speed with Unchanged MEP

Two of the new G-engines (G80ME-C9 and G50ME-B9) are specified with
the L1 speed and power in the table below:
Engine L1 speed [rpm] L1 power/cyl. [kW]

G80ME-C9 68 4,450
G50ME-B9 100 1,720
Variants of these engines with increased speed and unchanged MEP are
available on request:
Engine L1 speed [rpm] L1 power/cyl. [kW]

G80ME-C9 72 4,710
G50ME-B9 108 1,860
Schematic Layout Diagram for G80ME-C9 and G50ME-B9 with Extended Area
Power
Speed
10
Fuel Consumption and Optimisation Possibilities
The current economic scenario has placed more emphasis on operational
flexibility in terms of demand for improved part-load and low-load SFOC.
As described below, different optimisation possibilities for the MAN B&W
type engines have been developed.
NO x regulations place a limit on the SFOC on two-stroke engines. In gen-

eral, NO x emissions will increase if SFOC is decreased and vice versa. In
the standard configuration, the engines are optimised close to the IMO NO x
limit and, therefore, NO x emissions may not be further increased.
The IMO NO x limit is given as a weighted average of the NO x emission at

25, 50, 75 and 100% load. This relationship can be utilised to tilt the SFOC
profile over the load range. This means that SFOC can be reduced at part
load or low load at the expense of a higher SFOC in the high-load range
without exceeding the IMO NO x limit.
Optimisation of SFOC in the part-load (50-85%) or low-load (25-70%) range

requires selection of a tuning method:
ECT: Engine Control Tuning (only available on ME/ME-C engines)

VT: Variable Turbine Area
EGB: Exhaust Gas Bypass
The above tuning methods are available for all SMCR in the specific en-
gine layout diagram. The specific SFOC reduction potential of each tuning
method together with full rated (L1/L 3) and maximum derated (L 2/L4) can be
seen for each individual engine page.
Only high-load optimisation is available for engines with conventional ef-

ficiency turbochargers (64% instead of 67%) and non-adjustable maximum
firing pressure at part load (MC engines without VIT).
The methods and options mentioned will be explained in the following.
For K98 engines high-load optimising is not a relevant option any more.
However, for such engines in part-load or low-load optimised execution,
the full 100% load is still available when needed for operational reasons.
11
Engine Control Tuning – Only Available for ME/ME-C Type Engines
This method can be implemented without change of engine components,
only engine control parameters are changed. The method solely utilises the
possibility for variable exhaust valve timing and injection timing and profil-
ing.
Two different optimisation possibilities are available. With part-load optimi-

sation, SFOC is decreased at all loads below 85%. With low-load optimi-
sation, SFOC is further decreased at loads below 70%, however, at the
expense of a higher SFOC in the high-load range. Which option is optimal
on a specific engine depends on the operating pattern.
The authorities do not allow random shifting between the modes. A mode
shift in case of a change in trade pattern is permitted if reported and ap-
proved by the flag state representative, usually a classification society.
Hence, on a longer term basis, the owner can select one or the other of the
modes for the engine, provided the authorities are informed.
Variable Turbine Area – VT Technology (or similar)

This method requires special turbocharger parts allowing the turbo-
charger(s) on the engine to vary the area of the nozzle ring. The nozzle ring
area is minimum at the lower engine load range. When the engine load is
increased above approx. 80%, the area gradually starts to increase and
reaches its maximum at 90% engine load. With this technology, SFOC is
decreased at low load at the expense of a higher SFOC at high load.
The VT technology is available for both the ME and MC type engines. The
SFOC potential is better on the ME type engine, where VT is combined with
variable exhaust valve timing.
For both the ME and MC type engines, two optimisation possibilities are
available. With part-load optimisation, SFOC is decreased at all loads be-
low 85%. With low-load optimisation, SFOC is further decreased at loads
below 70%, at the expense of a higher SFOC in the high-load range. Which
option is optimal on a specific engine depends on the operating pattern.
12
Exhaust Gas Bypass (EGB)
This method requires installation of EGB technology. The turbocharger(s)
on the engine are matched at 100% load with fully open EGB. At approxi-
mately 85% load, the EGB starts to close and is fully closed below 70%
load. With this technology SFOC is decreased at low load, at the expense
of a higher SFOC at high load.
The EGB technology is available for both ME and MC type engines. The
SFOC potential is better on the ME type engine, where EGB is combined
with variable exhaust valve timing.
For both ME and MC type engines, two optimisation possibilities are avail-
able. With part-load optimisation, SFOC is decreased at all loads below
85%. With low-load optimisation, SFOC is further decreased at loads below
70%, at the expense of a higher SFOC in the high-load range. Which option
is optimal depends on the operating pattern.
Turbocharger (TC) Cut-out

Besides the above-mentioned part-load and low-load methods (ECT, VT
and EGB), turbocharger cut-out can be applied on MAN B&W engines. This
method is mainly used on larger bore engines with two to four turbocharg-
ers. Many of the new container vessels in service with K98/90 engines have
TC cut-out installed.
At low load one TC is cut out, resulting in decreased SFOC. The major-
ity of the cut-out systems being retrofitted use manually installed blinding
plates, which assumes that owners expect operating at reduced speed
for extended periods. As an option, semi-automatic cut-out valves can be
installed to reduce the time for cut in or out to approx. 30 min. at dead slow
or with stopped engine.
SFOC benefits of up to 7 g/kWh can be achieved with TC cut-out at low

load. However, the engine load is limited when operating with TC cut-out.
13
Turbocharging System
Two-stroke low speed engines can be delivered with MAN, ABB or MHI
turbochargers as standard.
The SFOC figures given in this folder for two-stroke engines are based on
turbocharging with the best possible turbocharging efficiency generally
available, i.e. 67% for all engines with 50 bore and above (plus S46MC-C/
ME-B8) and 64% for engine bores smaller than 50 cm (except S46MC-C/
ME-B8). Both efficiency figures refer to 100% specified MCR. At lower
loads the turbocharger efficiency will be even higher.
For more information visit: www.mandieselturbo.com → ‘Products’ →

‘Marine Engines & Systems’ → ‘Low Speed’ → ‘Turbocharger Selection’.
Waste Heat Recovery

Waste heat can be economically recovered from all MAN B&W two-stroke
engines from 50 bore and up, by installing equipment for Waste Heat Re-
covery (WHR) and matching the engine for WHR.
A standard WHR-matched MAN B&W two-stroke engine will have a higher

exhaust gas temperature compared with an engine without WHR, and can
produce an extra electric power output corresponding to approx. 10% of
the engine shaft power. Total system efficiency will therefore be better than
that of the engine itself.
Lubricating Oil Consumption

The system oil consumption varies for the different engine sizes and
operational patterns. Typical consumptions are in the range from negligible
to 0.1 g/kwh.
Specific Cylinder Oil Consumption

Alpha ACC (Adaptive Cylinder-oil Control) is the lubrication mode for MAN
B&W two-stroke engines, i.e. lube oil dosing proportional to the engine
load and proportional to the sulphur content in the fuel oil being burnt. The
specific minimum dosage at lower-sulphur fuels is set at 0.6 g/kWh.
After a running-in period of 2,500 hours, the feed rate sulphur proportional
factor is 0.20 g/kWh x S% for all engines with 60 bore and above and 0.26
g/kWh x S% for engines with 50 bore and below.
14
Engines with 60 bore and above – ACC dosage for BN70 cylinder oil
Based on calculations of the aver- Absolute dosage (g/kWh)
1.40
age worldwide sulphur content 1.30
used on MAN B&W two-stroke 1.20

1.10
engines, the average cylinder oil 1.00
0.90
consumption will be less than 0.65 0.80
g/kWh. 0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
Sulphur %
Engines with 50 bore and below – ACC dosage for BN70 cylinder oil
Based on calculations of the Absolute dosage (g/kWh)
1.40
average worldwide sulphur 1.30
content used on MAN B&W two- 1.20 1.10

stroke engines, the average cyl- 1.00
0.90
inder oil consumption will be less 0.80
than 0.7 g/kWh. 0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
Sulphur %
Further information on cylinder oil as a function of fuel oil sulphur content

and alkalinity of lubricating oil is available from MAN Diesel & Turbo.
Extent of Delivery
The final and binding extent of delivery of MAN B&W two-stroke engines is
to be supplied by our licensee, the engine maker, who should be contacted
in order to determine the execution for the actual project.
In order to facilitate negotiations between the yard, the engine maker and
the customer, a set of guiding ‘Extent of Delivery’ (EoD) forms is available in
which MAN Diesel & Turbo’s recommended basic and optional executions
are specified.
Please note that licencees may select a different extent of delivery as their
standard.
15
CEAS - Engine Room Dimensioning
The CEAS program calculates basic data essential for the design and
dimensioning of a ship’s engine room. CEAS is available at
www.mandieselturbo.com → ‘Products’ → ‘Marine Engines & Systems’ →
‘Low Speed’ → ‘CEAS Engine Room Dimensions’.
In CEAS the engines are named with version numbers .1/.2. In this pro-
gramme K98ME7/ME-C7 are referring to K98ME7.1 and K98ME-C7.1.
All the others are referring to .2 – e.g. G80ME-C8.2.
Engine Dimensions
The minimum lengths L min are stated from the aft end of the crankshaft to
the fore end of the engine footprint.
L min: Minimum length of engine

A: Cylinder distance
B: Bedplate width
H1
C: Crankshaft to underside
H3
of foot flange
H1: Normal lifting procedure H2
H 2: Reduced height lifting
procedure
C
H 3: With electric double-jib crane A B
L min
Dry Masses
Dry masses are stated for engines with MAN turbocharger(s) and a stan-
dard turning wheel. The figures can vary up to 10% depending on the de-
sign and options chosen, e.g. moment compensators, tuning wheel, etc.
Alternative Cylinder Numbers

Engine types with 70 bore and smaller are available with 4 cylinders on
request.
16
Engine Type Designation
6 S 70 M E -B/C 8 -GI-TII
Emission regulation TII IMO Tier level
(blank) Fuel oil only

Fuel injection concept
GI Gas injection
Mark number
B Exhaust valve controlled

Design by camshaft
C Compact engine
E Electronically controlled
Concept
C Camshaft controlled
Engine programme series
Diameter of piston in cm
G ‘Green’ Ultra long stroke
S Super long stroke
Stroke/bore ratio L Long stroke
K Short stroke
Number of cylinders
17
MAN B&W K98ME-C7
Cyl. L1 kW L1 MEP: 19.2 bar Stroke: 2,400 mm
6 36,120
kW/cyl.
7 42,140 L1
6,020
8 48,160
L3
9 54,180 5,620
10 60,200 4,830
L2
11 66,220
12 72,240 4,510 L4
14 84,280
97 104 r/min
SFOC for engines with layout on L1 - L3 line [g/kWh]

SFOC optimised load range Tuning 50% 75% 100%
ECT 171.5 169.0 177.0
Part load (50%-85%)
EGB 169.5 168.5 175.5
ECT 170.0 169.5 175.5
Low load (25%-70%)
EGB 167.5 169.5 175.5

ECT 167.5 163.0 171.0
Part load (50%-85%)
EGB 165.5 162.5 169.5
ECT 166.0 163.5 169.5
Low load (25%-70%)
EGB 163.5 163.5 169.5
Specifications
Dimensions: A B C H1 H2 H3
mm 1,750 4,370 1,700 12,900 12,575 -
Cylinders: 6 7 8 9 10 11 12 14
Lmin mm 12,865 14,615 16,410 19,135 20,885 22,635 24,385 27,885
Dry mass t 1,046 1,211 1,393 1,532 1,680 1,912 1,975 2,246
18
MAN B&W K98ME7
6 37,380
kW/cyl.
7 43,610 L1
6,230
8 49,840
L3
9 56,070 5,780
10 62,300 5,000
L2
11 68,530
12 74,760 4,630 L4
14 87,220
90 97 r/min

ECT 171.5 169.0 177.0
Part load (50%-85%)
EGB 169.5 168.5 175.5
ECT 170.0 169.5 175.5
Low load (25%-70%)
EGB 167.5 169.5 175.5

ECT 167.5 163.0 171.0
Part load (50%-85%)
EGB 165.5 162.5 169.5
ECT 166.0 163.5 169.5
Low load (25%-70%)
EGB 163.5 163.5 169.5
Specifications
mm 1,750 4,640 1,700 13,375 13,075 -
Cylinders: 6 7 8 9 10 11 12 14
Lmin mm 12,865 14,615 16,410 19,135 20,885 22,635 24,385 27,885
Dry mass t 1,067 1,220 1,437 1,581 1,755 1,895 2,058 2,328
19
MAN B&W S90ME-C9
5 29,050
kW/cyl.
6 34,860 L1
5,810
7 40,670
L3
8 46,480 5,250
9 52,290 4,650
L2
10 58,100
11 63,910 4,200 L4
12 69,720
14 81,340 76 84 r/min

High load (85%-100%) - 165.5 163.0 167.0
ECT 164.5 162.0 170.0
Part load (50%-85%) VT 162.5 161.5 167.5
EGB 162.5 161.5 168.5
ECT 163.0 162.5 168.5
Low load (25%-70%) VT 160.5 162.5 167.5
EGB 160.5 162.5 168.5

High load (85%-100%) - 161.5 157.0 161.0
ECT 160.5 156.0 164.0
Part load (50%-85%) VT 158.5 155.5 161.5
EGB 158.5 155.5 162.5
ECT 159.0 156.5 162.5
Low load (25%-70%) VT 156.5 156.5 161.5
EGB 156.5 156.5 162.5
Specifications
mm 1,590 5,140 1,900 15,000 * *
Cylinders: 5 6 7 8 9 10 11 12 14
Lmin mm 10,715 12,305 13,895 15,485 18,885 20,855 22,445 24,225 27,595
Dry mass t 925 1,070 1,215 1,360 1,595 1,765 1,920 2,070 2,370
* Data is available on request
20
MAN B&W S90ME-C8
6 31,620
kW/cyl.
7 36,890 L1
5,270
8 42,160
L3
9 47,430 4,870
4,220
L2
3,890 L4
72 78 r/min

High load (85%-100%) - 166.5 164.0 168.0
ECT 165.5 163.0 171.0
Part load (50%-85%) VT 163.5 162.5 168.5
EGB 163.5 162.5 169.5
ECT 164.0 163.5 169.5
Low load (25%-70%) VT 161.5 163.5 168.5
EGB 161.5 163.5 169.5

High load (85%-100%) - 162.5 158.0 162.0
ECT 161.5 157.0 165.0
Part load (50%-85%) VT 159.5 156.5 162.5
EGB 159.5 156.5 163.5
ECT 160.0 157.5 163.5
Low load (25%-70%) VT 157.5 157.5 162.5
EGB 157.5 157.5 163.5
Specifications
mm 1,602 5,000 1,800 14,500 13,650 14,100
Cylinders: 6 7 8 9
Lmin mm 12,802 14,404 16,006 17,608
Dry mass t 1,010 1,136 1,290 1,450
21
MAN B&W G80ME-C9
6 26,700
kW/cyl.
7 31,150 L1
4,450
8 35,600
L3
9 40,050 3,800
3,560
L2
3,040 L4
58 68 r/min

High load (85%-100%) - 165.5 163.0 167.0
ECT 164.5 162.0 170.0
Part load (50%-85%) VT 162.5 161.5 167.5
EGB 162.5 161.5 168.5
ECT 163.0 162.5 168.5
Low load (25%-70%) VT 160.5 162.5 167.5
EGB 160.5 162.5 168.5

High load (85%-100%) - 161.5 157.0 161.0
ECT 160.5 156.0 164.0
Part load (50%-85%) VT 158.5 155.5 161.5
EGB 158.5 155.5 162.5
ECT 159.0 156.5 162.5
Low load (25%-70%) VT 156.5 156.5 161.5
EGB 156.5 156.5 162.5
Specifications
mm 1,400 5,450 1,890 * * *
Cylinders: 6 7 8 9
Lmin mm 10,430 11,830 13,230 14,630
Dry mass t 850 960 1,080 1,190
22
MAN B&W S80ME-C9
6 27,060
kW/cyl.
7 31,570 L1
4,510
8 36,080
L3
9 40,590 4,160
3,610
L2
3,330 L4
72 78 r/min

High load (85%-100%) - 166.5 164.0 168.0
ECT 165.5 163.0 171.0
Part load (50%-85%) VT 163.5 162.5 168.5
EGB 163.5 162.5 169.5
ECT 164.0 163.5 169.5
Low load (25%-70%) VT 161.5 163.5 168.5
EGB 161.5 163.5 169.5

High load (85%-100%) - 162.5 158.0 162.0
ECT 161.5 157.0 165.0
Part load (50%-85%) VT 159.5 156.5 162.5
EGB 159.5 156.5 163.5
ECT 160.0 157.5 163.5
Low load (25%-70%) VT 157.5 157.5 162.5
EGB 157.5 157.5 163.5
Specifications
mm 1,334 5,280 1,900 15,050 13,925 13,500
Cylinders: 6 7 8 9
Lmin mm 10,100 11,434 12,768 14,102
Dry mass t 800 910 1,020 1,130
23
MAN B&W S80ME-C8
6 27,000
kW/cyl.
7 31,500 L1
4,500
8 36,000
L3
3,860
3,600
L2
3,090 L4
72 84 r/min

High load (85%-100%) - 166.5 164.0 168.0
ECT 165.5 163.0 171.0
Part load (50%-85%) VT 163.5 162.5 168.5
EGB 163.5 162.5 169.5
ECT 164.0 163.5 169.5
Low load (25%-70%) VT 161.5 163.5 168.5
EGB 161.5 163.5 169.5

High load (85%-100%) - 162.5 158.0 162.0
ECT 161.5 157.0 165.0
Part load (50%-85%) VT 159.5 156.5 162.5
EGB 159.5 156.5 163.5
ECT 160.0 157.5 163.5
Low load (25%-70%) VT 157.5 157.5 162.5
EGB 157.5 157.5 163.5
Specifications
mm 1,424 5,000 1,736 14,325 13,175 12,950
Cylinders: 6 7 8
Lmin mm 11,431 12,855 14,279
Dry mass t 820 922 1,023
24
MAN B&W K80ME-C9
6 27,180
kW/cyl.
7 31,710 L1
4,530
8 36,240
L3
9 40,770 4,090
10 45,300 3,620
L2
11 49,830
12 54,360 3,280 L4
94 104 r/min

High load (85%-100%) - 170.5 168.0 172.0
ECT 169.5 167.0 175.0
Part load (50%-85%) VT 167.5 166.5 172.5
EGB 167.5 166.5 173.5
ECT 168.0 167.5 173.5
Low load (25%-70%) VT 165.5 167.5 172.5
EGB 165.5 167.5 173.5

High load (85%-100%) - 166.5 162.0 166.0
ECT 165.5 161.0 169.0
Part load (50%-85%) VT 163.5 160.5 166.5
EGB 163.5 160.5 167.5
ECT 164.0 161.5 167.5
Low load (25%-70%) VT 161.5 161.5 166.5
EGB 161.5 161.5 167.5
Specifications
mm 1,334 4,480 1,650 12,400 11,825 11,675
Cylinders: 6 7 8 9 10 11 12
Lmin mm 10,100 11,434 12,768 14,102 16,676 18,010 19,344
Dry mass t 705 790 890 985 1,130 1,220 1,315
25
26
MAN B&W G70ME-C9
5 18,200
kW/cyl.
6 21,840 L1
3,640
7 25,480
L3
8 29,120 2,890
2,910
L2
2,310 L4
66 83 r/min

High load (85%-100%) - 166.5 164.0 168.0
ECT 165.5 163.0 171.0
Part load (50%-85%) VT 163.5 162.5 168.5
EGB 163.5 162.5 169.5
ECT 164.0 163.5 169.5
Low load (25%-70%) VT 161.5 163.5 168.5
EGB 161.5 163.5 169.5

High load (85%-100%) - 162.5 158.0 162.0
ECT 161.5 157.0 165.0
Part load (50%-85%) VT 159.5 156.5 162.5
EGB 159.5 156.5 163.5
ECT 160.0 157.5 163.5
Low load (25%-70%) VT 157.5 157.5 162.5
EGB 157.5 157.5 163.5
Specifications
mm 1,220 4,900 1,750 * * *
Cylinders: 5 6 7 8
Lmin mm 8,460 9,680 10,900 12,120
Dry mass t 490 580 655 735
27
MAN B&W S70ME-C8
5 16,350
kW/cyl.
6 19,620 L1
3,270
7 22,890
L3
8 26,160 2,770
2,610
L2
2,210 L4
77 91 r/min

High load (85%-100%) - 167.5 165.0 169.0
ECT 166.5 164.0 172.0
Part load (50%-85%) VT 164.5 163.5 169.5
EGB 164.5 163.5 170.5
ECT 165.0 164.5 170.5
Low load (25%-70%) VT 162.5 164.5 169.5
EGB 162.5 164.5 170.5

High load (85%-100%) - 163.5 159.0 163.0
ECT 162.5 158.0 166.0
Part load (50%-85%) VT 160.5 157.5 163.5
EGB 160.5 157.5 164.5
ECT 161.0 158.5 164.5
Low load (25%-70%) VT 158.5 158.5 163.5
EGB 158.5 158.5 164.5
Specifications
mm 1,190 4,390 1,520 12,550 11,675 11,475
Cylinders: 5 6 7 8
Lmin mm 8,308 9,498 10,688 11,878
Dry mass t 451 534 605 681
28
MAN B&W S70MC-C8
5 16,350
kW/cyl.
6 19,620 L1
3,270
7 22,890
L3
8 26,160 2,770
2,610
L2
2,210 L4
77 91 r/min

High load (85%-100%) - 174.0 169.0 172.0
VT 172.0 168.0 174.0
Part load (50%-85%)
EGB 172.0 168.0 175.0
VT 171.0 169.0 173.0
Low load (25%-70%)
EGB 171.0 169.0 174.0

High load (85%-100%) - 170.0 163.5 166.0
VT 168.0 162.0 168.0
Part load (50%-85%)
EGB 168.0 162.0 169.0
VT 167.0 163.0 167.0
Low load (25%-70%)
EGB 167.0 163.0 168.0
Specifications
mm 1,190 4,390 1,520 12,475 11,675 11,425
Cylinders: 5 6 7 8
Lmin mm 8,308 9,498 10,688 11,878
Dry mass t 495 569 624 704
29
MAN B&W L70ME-C8
5 16,350
kW/cyl.
6 19,620 L1
3,270
7 22,890
L3
8 26,160 2,750
2,620
L2
2,200 L4
91 108 r/min

High load (85%-100%) - 168.5 166.0 170.0
ECT 167.5 165.0 173.0
Part load (50%-85%) VT 165.5 164.5 170.5
EGB 165.5 164.5 171.5
ECT 166.0 165.5 171.5
Low load (25%-70%) VT 163.5 165.5 170.5
EGB 163.5 165.5 171.5

High load (85%-100%) - 164.5 160.0 164.0
ECT 163.5 159.0 167.0
Part load (50%-85%) VT 161.5 158.5 164.5
EGB 161.5 158.5 165.5
ECT 162.0 159.5 165.5
Low load (25%-70%) VT 159.5 159.5 164.5
EGB 159.5 159.5 165.5
Specifications
mm 1,190 3,980 1,262 11,250 10,550 10,575
Cylinders: 5 6 7 8
Lmin mm 7,639 8,829 10,019 11,209
Dry mass t 437 506 569 642
30
MAN B&W L70MC-C8
5 16,350
kW/cyl.
6 19,620 L1
3,270
7 22,890
L3
8 26,160 2,750
2,620
L2
2,200 L4
91 108 r/min

High load (85%-100%) - 175.0 170.0 173.0
VT 173.0 169.0 175.0
Part load (50%-85%)
EGB 173.0 169.0 176.0
VT 172.0 170.0 174.0
Low load (25%-70%)
EGB 172.0 170.0 175.0

High load (85%-100%) - 171.0 164.5 167.0
VT 169.0 163.0 169.0
Part load (50%-85%)
EGB 169.0 163.0 170.0
VT 168.0 164.0 168.0
Low load (25%-70%)
EGB 168.0 164.0 169.0
Specifications
mm 1,190 3,980 1,262 11,250 10,475 10,475
Cylinders: 5 6 7 8
Lmin mm 7,639 8,829 10,019 11,209
Dry mass t 465 501 586 683
31
MAN B&W S65ME-C8
5 14,350
kW/cyl.
6 17,220 L1
2,870
7 20,090
L3
8 22,960 2,450
2,290
L2
1,960 L4
81 95 r/min

High load (85%-100%) - 167.5 165.0 169.0
ECT 166.5 164.0 172.0
Part load (50%-85%) VT 164.5 163.5 169.5
EGB 164.5 163.5 170.5
ECT 165.0 164.5 170.5
Low load (25%-70%) VT 162.5 164.5 169.5
EGB 162.5 164.5 170.5

High load (85%-100%) - 163.5 159.0 163.0
ECT 162.5 158.0 166.0
Part load (50%-85%) VT 160.5 157.5 163.5
EGB 160.5 157.5 164.5
ECT 161.0 158.5 164.5
Low load (25%-70%) VT 158.5 158.5 163.5
EGB 158.5 158.5 164.5
Specifications
mm 1,084 4,124 1,410 11,950 11,225 11,025
Cylinders: 5 6 7 8
Lmin mm 7,068 8,152 9,236 10,320
Dry mass t 382 451 512 575
32
MAN B&W S65MC-C8
5 14,350
kW/cyl.
6 17,220 L1
2,870
7 20,090
L3
8 22,960 2,450
2,290
L2
1,960 L4
81 95 r/min

High load (85%-100%) - 174.0 169.0 172.0
VT 172.0 168.0 174.0
Part load (50%-85%)
EGB 172.0 168.0 175.0
VT 171.0 169.0 173.0
Low load (25%-70%)
EGB 171.0 169.0 174.0

High load (85%-100%) - 170.0 163.5 166.0
VT 168.0 162.0 168.0
Part load (50%-85%)
EGB 168.0 162.0 169.0
VT 167.0 163.0 167.0
Low load (25%-70%)
EGB 167.0 163.0 168.0
Specifications
mm 1,084 4,124 1,410 * * *
Cylinders: 5 6 7 8
Lmin mm 7,068 8,152 9,236 10,320
Dry mass t 401 474 538 604
33
MAN B&W G60ME-C9
5 13,400
kW/cyl.
6 16,080 L1
2,680
7 18,760
L3
8 21,440 2.130
2,140
L2
1,700 L4
77 97 r/min

High load (85%-100%) - 166.5 164.0 168.0
ECT 165.5 163.0 171.0
Part load (50%-85%) VT 163.5 162.5 168.5
EGB 163.5 162.5 169.5
ECT 164.0 163.5 169.5
Low load (25%-70%) VT 161.5 163.5 168.5
EGB 161.5 163.5 169.5

High load (85%-100%) - 162.5 158.0 162.0
ECT 161.5 157.0 165.0
Part load (50%-85%) VT 159.5 156.5 162.5
EGB 159.5 156.5 163.5
ECT 160.0 157.5 163.5
Low load (25%-70%) VT 157.5 157.5 162.5
EGB 157.5 157.5 163.5
Specifications
mm 1,050 4,200 1,500 * * *
Cylinders: 5 6 7 8
Lmin mm 7,280 8,330 9,380 10,430
Dry mass t 350 395 445 495
34
MAN B&W S60ME-B8
5 11,900
kW/cyl.
6 14,280 L1
2,380
7 16,660
L3
8 19,040 2,010
1,900
L2
1,610 L4
89 105 r/min

High load (85%-100%) - 170.0 165.0 168.0
VT 168.0 164.0 170.0
Part load (50%-85%)
EGB 168.0 164.0 171.0
VT 167.0 165.0 169.0
Low load (25%-70%)
EGB 167.0 165.0 170.0

High load (85%-100%) - 166.0 159.5 162.0
VT 164.0 158.0 164.0
Part load (50%-85%)
EGB 164.0 158.0 165.0
VT 163.0 159.0 163.0
Low load (25%-70%)
EGB 163.0 159.0 164.0
The SFOC excludes 1 g/kWh for the consumption of the electric HPS
Specifications
mm 1,020 3,770 1,300 10,750 10,000 9,725
Cylinders: 5 6 7 8
Lmin mm 7,122 8,142 9,162 10,182
Dry mass t Not yet available
35
MAN B&W S60ME-C8
5 11,900
kW/cyl.
6 14,280 L1
2,380
7 16,660
L3
8 19,040 2,010
1,900
L2
1,610 L4
89 105 r/min

High load (85%-100%) - 167.5 165.0 169.0
ECT 166.5 164.0 172.0
Part load (50%-85%) VT 164.5 163.5 169.5
EGB 164.5 163.5 170.5
ECT 165.0 164.5 170.5
Low load (25%-70%) VT 162.5 164.5 169.5
EGB 162.5 164.5 170.5

High load (85%-100%) - 163.5 159.0 163.0
ECT 162.5 158.0 166.0
Part load (50%-85%) VT 160.5 157.5 163.5
EGB 160.5 157.5 164.5
ECT 161.0 158.5 164.5
Low load (25%-70%) VT 158.5 158.5 163.5
EGB 158.5 158.5 164.5
Specifications
mm 1,020 3,770 1,300 10,750 10,000 9,725
Cylinders: 5 6 7 8
Lmin mm 7,122 8,142 9,162 10,182
Dry mass t 321 366 414 463
36
MAN B&W S60MC-C8
5 11,900
kW/cyl.
6 14,280 L1
2,380
7 16,660
L3
8 19,040 2,010
1,900
L2
1,610 L4
89 105 r/min

High load (85%-100%) - 174.0 169.0 172.0
VT 172.0 168.0 174.0
Part load (50%-85%)
EGB 172.0 168.0 175.0
VT 171.0 169.0 173.0
Low load (25%-70%)
EGB 171.0 169.0 174.0

High load (85%-100%) - 170.0 163.5 166.0
VT 168.0 162.0 168.0
Part load (50%-85%)
EGB 168.0 162.0 169.0
VT 167.0 163.0 167.0
Low load (25%-70%)
EGB 167.0 163.0 168.0
Specifications
mm 1,020 3,770 1,300 10,700 10,050 9,800
Cylinders: 5 6 7 8
Lmin mm 7,122 8,142 9,162 10,182
Dry mass t 324 368 410 467
37
MAN B&W L60ME-C8
5 11,700
kW/cyl.
6 14,040 L1
2,340
7 16,380
L3
8 18,720 2,000
9 21,060 1,880
L2
1,600 L4
105 123 r/min

High load (85%-100%) - 168.5 166.0 170.0
ECT 167.5 165.0 173.0
Part load (50%-85%) VT 165.5 164.5 170.5
EGB 165.5 164.5 171.5
ECT 166.0 165.5 171.5
Low load (25%-70%) VT 163.5 165.5 170.5
EGB 163.5 165.5 171.5

High load (85%-100%) - 164.5 160.0 164.0
ECT 163.5 159.0 167.0
Part load (50%-85%) VT 161.5 158.5 164.5
EGB 161.5 158.5 165.5
ECT 162.0 159.5 165.5
Low load (25%-70%) VT 159.5 159.5 164.5
EGB 159.5 159.5 165.5
Specifications
mm 1,020 3,490 1,134 9,675 9,125 8,925
Cylinders: 5 6 7 8 9
Lmin mm 7,122 8,142 9,162 10,182 11,202
Dry mass t 286 326 354 426 479
38
MAN B&W L60MC-C8
5 11,700
kW/cyl.
6 14,040 L1
2,340
7 16,380
L3
8 18,720 2,000
9 21,060 1,880
L2
1,600 L4
105 123 r/min

High load (85%-100%) - 175.0 170.0 173.0
VT 173.0 169.0 175.0
Part load (50%-85%)
EGB 173.0 169.0 176.0
VT 172.0 170.0 174.0
Low load (25%-70%)
EGB 172.0 170.0 175.0

High load (85%-100%) - 171.0 164.5 167.0
VT 169.0 163.0 169.0
Part load (50%-85%)
EGB 169.0 163.0 170.0
VT 168.0 164.0 168.0
Low load (25%-70%)
EGB 168.0 164.0 169.0
Specifications
mm 1,020 3,228 1,134 9,675 9,125 8,925
Lmin mm 7,122 8,142 9,162 10,182 11,202
Dry mass t 304 347 397 453 510
39
40
MAN B&W G50ME-B9
5 8,600
kW/cyl.
6 10,320 L1
1,720
7 12,040
L3
8 13,760 1,460
9 15,480 1,370
L2
1,170 L4
85 100 r/min

High load (85%-100%) - 170.0 165.0 168.0
VT 168.0 164.0 170.0
Part load (50%-85%)
EGB 168.0 164.0 171.0
VT 167.0 165.0 169.0
Low load (25%-70%)
EGB 167.0 165.0 170.0

High load (85%-100%) - 166.0 159.5 162.0
VT 164.0 158.0 164.0
Part load (50%-85%)
EGB 164.0 158.0 165.0
VT 163.0 159.0 163.0
Low load (25%-70%)
EGB 163.0 159.0 164.0
Specifications
mm 875 3,728 1,195 10,525 10,400 10,150
Lmin mm 6,325 7,200 8,075 8,950 9,825
Dry mass t 205 240 275 305 340
41
MAN B&W S50ME-B9
5 8,900
kW/cyl.
6 10,680 L1
1,780
7 12,460
L3
8 14,240 1,510
9 16,020 1,420
L2
1,210 L4
99 117 r/min

High load (85%-100%) - 170.0 165.0 168.0
VT 168.0 164.0 170.0
Part load (50%-85%)
EGB 168.0 164.0 171.0
VT 167.0 165.0 169.0
Low load (25%-70%)
EGB 167.0 165.0 170.0

High load (85%-100%) - 166.0 159.5 162.0
VT 164.0 158.0 164.0
Part load (50%-85%)
EGB 164.0 158.0 165.0
VT 163.0 159.0 163.0
Low load (25%-70%)
EGB 163.0 159.0 164.0
Specifications
mm 875 3,290 1,185 9,775 9,200 8,900
Lmin mm 6,325 7,200 8,075 8,950 9,825
Dry mass t 194 225 257 289 321
42
MAN B&W S50ME-B8
5 8,300
kW/cyl.
6 9,960 L1
1,660
7 11,620
L3
8 13,280 1,410
9 14,940 1,330
L2
1,130 L4
108 127 r/min

High load (85%-100%) - 171.0 166.0 169.0
VT 169.0 165.0 171.0
Part load (50%-85%)
EGB 169.0 165.0 172.0
VT 168.0 166.0 170.0
Low load (25%-70%)
EGB 168.0 166.0 171.0

High load (85%-100%) - 167.0 160.5 163.0
VT 165.0 159.0 165.0
Part load (50%-85%)
EGB 165.0 159.0 166.0
VT 164.0 160.0 164.0
Low load (25%-70%)
EGB 164.0 160.0 165.0
Specifications
mm 850 3,150 1,088 9,000 8,475 8,250
Lmin mm 5,924 6,774 7,624 8,474 9,324
Dry mass t 189 215 241 276 314
43
MAN B&W S50ME-C8
5 8,300
kW/cyl.
6 9,960 L1
1,660
7 11,620
L3
8 13,280 1,410
9 14,940 1,330
L2
1,130 L4
108 127 r/min

High load (85%-100%) - 168.5 166.0 170.0
ECT 167.5 165.0 173.0
Part load (50%-85%) VT 165.5 164.5 170.5
EGB 165.5 164.5 171.5
ECT 166.0 165.5 171.5
Low load (25%-70%) VT 163.5 165.5 170.5
EGB 163.5 165.5 171.5

High load (85%-100%) - 164.5 160.0 164.0
ECT 163.5 159.0 167.0
Part load (50%-85%) VT 161.5 158.5 164.5
EGB 161.5 158.5 165.5
ECT 162.0 159.5 165.5
Low load (25%-70%) VT 159.5 159.5 164.5
EGB 159.5 159.5 165.5
Specifications
mm 850 3,150 1,085 9,000 8,475 8,250
Lmin mm 5,924 6,774 7,624 8,474 9,324
Dry mass t 180 211 241 271 293
44
MAN B&W S50MC-C8
5 8,300
kW/cyl.
6 9,960 L1
1,660
7 11,620
L3
8 13,280 1,410
9 14,940 1,330
L2
1,130 L4
108 127 r/min

High load (85%-100%) - 175.0 170.0 173.0
VT 173.0 169.0 175.0
Part load (50%-85%)
EGB 173.0 169.0 176.0
VT 172.0 170.0 174.0
Low load (25%-70%)
EGB 172.0 170.0 175.0

High load (85%-100%) - 171.0 164.5 167.0
VT 169.0 163.0 169.0
Part load (50%-85%)
EGB 169.0 163.0 170.0
VT 168.0 164.0 168.0
Low load (25%-70%)
EGB 168.0 164.0 169.0
Specifications
mm 850 3,150 1,085 9,000 8,475 8,250
Lmin mm 5,924 6,774 7,624 8,474 9,324
Dry mass t 186 212 238 273 311
45
MAN B&W S46ME-B8
5 6,900
kW/cyl.
6 8,280 L1
1,380
7 9,660
L3
8 11,040 1,175
1,105
L2
940 L4
110 129 r/min

High load (85%-100%) - 172.0 167.0 170.0
VT 170.0 166.0 172.0
Part load (50%-85%)
EGB 170.0 166.0 173.0
VT 169.0 167.0 171.0
Low load (25%-70%)
EGB 169.0 167.0 172.0

High load (85%-100%) - 168.0 161.5 164.0
VT 166.0 160.0 166.0
Part load (50%-85%)
EGB 166.0 160.0 167.0
VT 165.0 161.0 165.0
Low load (25%-70%)
EGB 165.0 161.0 166.0
Specifications
mm 782 2,924 986 9,000 8,175 7,900
Cylinders: 5 6 7 8
Lmin mm 5,528 6,310 7,092 7,874
Dry mass t 159 177 199 219
46
MAN B&W S46MC-C8
5 6,900
kW/cyl.
6 8,280 L1
1,380
7 9,660
L3
8 11,040 1,175
1,105
L2
940 L4
110 129 r/min

High load (85%-100%) - 177.0 172.2 174.0

High load (85%-100%) - 173.0 168.2 170.0
Specifications
mm 782 2,924 986 9,000 8,175 7,900
Cylinders: 5 6 7 8
Lmin mm 5,528 6,310 7,092 7,874
Dry mass t 157 175 197 217
47
MAN B&W S40ME-B9
5 5,675
kW/cyl.
6 6,810 L1
1,135
7 7,945
L3
8 9,080 965
910
L2
770 L4
124 146 r/min

High load (85%-100%) - 176.0 171.0 174.0

High load (85%-100%) - 172.0 165.5 168.0
Specifications
mm 700 2,590 950 7,800 7,475 7,200
Cylinders: 5 6 7 8
Lmin mm 5,000 5,700 6,400 7,100
Dry mass t 112 131 148 163
48
MAN B&W S40MC-C9
5 5,675
kW/cyl.
6 6,810 L1
1,135
7 7,945
L3
8 9,080 965
910
L2
770 L4
124 146 r/min

High load (85%-100%) - 180.0 175.0 177.0

High load (85%-100%) - 176.0 171.0 173.0
Specifications
mm 700 2,590 950 7,800 7,475 7,200
Cylinders: 5 6 7 8
Lmin mm 5,000 5,700 6,400 7,100
Dry mass t 112 131 148 163
49
MAN B&W S35ME-B9
5 4,350
kW/cyl.
6 5,220 L1
870
7 6,090
L3
8 6,960 740
695
L2
595 L4
142 167 r/min

High load (85%-100%) - 177.0 172.0 175.0

High load (85%-100%) - 173.0 166.5 169.0
Specifications
mm 612 2,265 830 6,875 6,700 6,325
Cylinders: 5 6 7 8
Lmin mm 4,378 4,990 5,602 6,214
Dry mass t 81 90 99 111
50
MAN B&W S35MC-C9
5 4,350
kW/cyl.
6 5,220 L1
870
7 6,090
L3
8 6,960 740
695
L2
595 L4
142 167 r/min

High load (85%-100%) - 181.0 176.0 178.0

High load (85%-100%) - 177.0 172.0 174.0
Specifications
mm 612 2,265 830 6,875 6,700 6,325
Cylinders: 5 6 7 8
Lmin mm 4,378 4,990 5,602 6,214
Dry mass t 81 90 99 111
51
Your fast access to technical aspects
of the MAN B&W two-stroke marine engines:
Marine Engine Programme
Turbocharger Selection
Installation Drawings
CEAS - Engine Room Dimensioning
Project Guides
Extent of Delivery
Technical Papers
MAN B&W Low Speed
Propulsion systems
54
MAN B&W Low Speed Propulsion Systems
MAN Alpha Controllable Pitch Propeller
T
he VBS programme features propeller blade pitch setting by a hydraulic
servo piston integrated in the propeller hub.
The figures stated after VBS indicate the propeller hub diameter.
Standard blade/hub materials are Ni-Al-bronze, stainless steel is op-
tional.
The propellers are available up to the highest ice classes. The below
standard programmes, however, are based on ‘no ice’.
VBS CP Propeller Programme
10,000
9,000
8,000
Propeller diameter (mm)
7,000 VBS2240
VBS2080
6,000
VBS
19 4
5,000 VBS
18 0 0
VBS 0
VBS 16 8
VBS 15 6 0
4,000 VBS 14 6 0
VBS 13 8 0
VBS 128 0
3,000 VBS 118 0 0
VBS 1080
VBS 9 8 0
2,000 VB 860
V B S S74 0
640
1,000
0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000
Engine Power (kW)
VBS Mk 5 CP Propeller Programme

11,000
10,000
9,000
8,000
7,000
6,000 VB
VB S2
VB S2 15
06 0
VB S1 0
VB S1 97
5,000 VB S1 89 0
VB S1 81 0
S1 73 0
64 0
VB
4,000 VB 0
S1
S1
55
45
VB
0
S1
VB
35
3,000
VB
S1
0
S1
26
VB 020
VB 940
0
18
S1
Hub sizes:
S1
VB 860
10
VB 79 0
S
2,000
VB S72 60
Small: VBS600 - 940

S 0
VB BS6 00
S
V S6
Medium: VBS1020 - 1640

VB
1,000 Large: VBS1730 - 2150
0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 55,000
Engine Power [kW]
55
MAN B&W Standard Package Examples
Prop. Hub Prop.
speed D VBS Q R Wmin mass
Cyl. kW r/min mm mm mm mm mm t 1)
G70ME-C9
5 18,200 83 8,100 1,890
6 21,840 83 8,450 2,060
7 25,480 83 8,750 2,150
8 29,120 83 4) 4)
S70MC-C/ME-C8/-GI 2)
5 16,350 91 7,450 1,810 1,375 1,413 3,700 72.8
6 19,620 91 7,750 1,890 1,436 1,500 3,700 84.0
7 22,890 91 8,050 1,970 1,497 1,550 3,700 93.4
8 26,160 91 8,250 2,060 1,565 1,630 3,700 101.3
L70MC-C/ME-C8 2)
5 16,350 108 6,750 1,640 1,246 1,306 3,700 63.0
6 19,620 108 7,000 1,730 1,315 1,367 3,700 70.0
7 22,890 108 7,250 1,810 1,375 1,448 3,700 78.0
8 26,160 108 7,400 1,890 1,436 1,500 3,700 85.6
S65MC-C/ME-C8/-GI 2)
5 14,350 95 7,150 1,730 1,315 1,339 3,400 66,1
6 17,220 95 7,450 1,810 1,375 1,385 3,400 73,0
7 20,090 95 7,700 1,890 1,436 1,466 3,400 81,2
8 22,960 95 7,900 1,970 1,497 1,512 3,400 89,3
1)
The masses are stated for 3,000 mm stern tube and 6,000 mm propeller shaft
2)
4)
Available on request.
Q R S~3000 Wmin
56
MAN B&W Standard Package Examples
Prop. Hub Prop.
G60ME-C9
5 13,400 97 6,950 1,640
6 16,080 97 7,250 1,730
7 18,760 97 7,450 1,810
8 21,440 97 7,700 1,890
S60MC-C/ME-C/ME-B8/-GI
5 11,900 105 6,350 1,680 1,278 1,289 3,000 53.4
6 14,280 105 6,600 1,800 1,367 1,362 3,000 59.7
7 16,660 105 6,850 1,800 1,367 1,367 3,000 63.2
8 19,040 105 7,050 1,940 1,458 1,450 3,000 72.0
L60MC-C/ME-C8 3)
5 11,700 123 5,800 1,560 1,175 1,248 2,925 43.8
6 14,040 123 6,000 1,680 1,278 1,284 2,925 49.4
7 16,380 123 6,150 1,680 1,278 1,284 2,925 52.7
8 18,720 123 6,300 1,800 1,367 1,367 2,925 60.3
G50ME-B9
5 8,600 100 6,150 1,450
6 10,320 100 6,450 1,550
7 12,040 100 6,650 1,550
8 13,760 100 6,850 1,640
9 15,480 100 7,050 1,730
S50ME-B9
5 8,900 117 5,650 1,460 1,100 1,141 2,700 35.7
6 10,680 117 5,850 1,560 1,175 1,202 2,700 41.3
7 12,460 117 6,050 1,560 1,175 1,202 2,700 44.5
8 14,240 117 6,200 1,680 1,278 1,279 2,700 50.5
9 16,020 117 6,350 1,800 1,367 1,332 2,900 58.0
1)
3)
Data for 9 cylinders is available on request.
57
Prop. Hub Prop.
S50MC-C/ME-C/ME-B8 3)
5 8,300 127 5,300 1,380 1,030 1,082 2,690 31.7
6 9,960 127 5,500 1,460 1,100 1,145 2,690 35.4
7 11,620 127 5,700 1,560 1,175 1,233 2,690 39.9
8 13,280 127 5,850 1,560 1,175 1,248 2,690 42.0
S46MC-C/ME-B8
5 6,900 129 5,100 1,280 957 1,035 2,650 27.4
6 8,220 129 5,300 1,380 1,030 1,082 2,650 29.9
7 9,660 129 5,500 1,460 1,100 1,145 2,650 34.0
8 11,040 129 5,650 1,560 1,175 1,233 2,650 38.9
S40MC-C/ME-B9
5 5,675 146 4,500 1,180 885 972 2,500 22.1
6 6,810 146 4,700 1,280 957 1,025 2,500 24.6
7 7,945 146 4,850 1,280 957 1,025 2,500 26.0
8 9,080 146 5,000 1,380 1,030 1,081 2,500 29.8
S35MC-C/ME-B9
5 4,350 167 4,000 1,080 821 920 2,500 16.3
6 5,220 167 4,150 1,080 821 920 2,500 16.9
7 6,090 167 4,300 1,180 885 946 2,500 19.4
8 6,960 167 4,400 1,180 885 946 2,500 20.4
1)
3)
Data for 9 cylinders is available on request.
58
MAN Medium Speed
Propulsion engines
60
MAN Medium Speed Propulsion Engines
IMO Tier II Compliant Engine Programme
While power density and fuel economy have always been in the focus of
diesel engine developers, MAN Diesel & Turbo is going one step further
and has committed itself to further reduce the environmental impact of its
diesel engines.
With the current engine programme, MAN Diesel & Turbo is already offering
a complete portfolio of IMO Tier II compliant diesel engines for the entire
power range.
By applying engine internal and well proven measures which lead to a

cleaner and more efficient combustion MAN Diesel & Turbo is able to
decrease noxious emissions without exhaust gas after treatment. Taking
every single engine into account, an assortment of the following measures
has been applied in order to reach the IMO Tier II emission level.
Common Rail injection

Miller valve timing
Variable Valve timing
Optimised charge air pressure by high performance turbo charger
Optimised charge air cooler
Increased compression ratio and retarded injection.
 
Further Emission Reduction
In addition to the overall low emission level, MAN Diesel & Turbo is of-
fering a wide range of complementary emission reduction technologies
such as Fuel Water Emulsification (FWE), Humid Air Motor (HAM), Selec-
tive Catalytic Reduction (SCR) or Exhaust Gas Scrubbing. Please contact
MAN Diesel & Turbo for further information.
The Common Rail (CR) Engine Programme

The well established MAN Diesel & Turbo common rail injection system
permits independent and separate control of injection pressure and timing.
The result is improved combustion and lower emissions with the same or
even better fuel economy. This gives strong advantages, especially in the
low-load range where it becomes possible to get the exhaust gas opacity
down far below the visible limit.
Engines equipped with CR-systems operate on distillates according to

ISO 8217-2010 DMA, DMZ, and DMB and residual fuels up to 700 cSt
(acc ISO-F-RMK 700).
61
Dual Fuel (DF) Engines
Dual fuel engines from MAN Diesel & Turbo efficiently run on liquid fuels or
natural gas with emissions far below the IMO limit. The possibility to switch
over seamlessly from gas to diesel operation and vice versa provides full
flexibility in multiple applications. All dual fuel engines can run on natural
gas with a methane number higher than 80 without adjustments. For lower
methane numbers, MAN Diesel & Turbo is in a position to deliver well
adapted solutions. The optimised combustion chamber gives very low fuel
consumption in both operational modes.
Diesel Oil (D) Engines

The V28/33 D engine operates on distillates according to ISO 8217 DMA
or equivalent fuel types. The engine features very favourable ratios of
power-to-weight and power-to-installation space. Together with its low fuel
consumption, its low emissions and its reduced life cycle costs, this engine
represents the ideal solution for propulsion in high speed ferries, naval and
offshore patrol vessels as well as land based and offshore power genera-
tion.
Sequential Turbo Charging (STC)

The MAN Diesel & Turbo sequential turbocharging system operates with
high efficiency turbochargers. Depending on the amount of charge air re-
quired, a second turbo charger can be switched on or off. In this way the
engine is operated at its optimum operating point over the whole applica-
ble load range. The result is an extended envelope at low engine speeds,
which gives a power reserve for ship acceleration, ship turning, sprints or
towing. Furthermore, a low thermal signature, decreased smoke emission,
low vibrations and reduced fuel consumption in part load operation charac-
terise the STC-system and make it the ideal solution for propulsion in naval
and offshore patrol vessels.
Engine Programme with Conventional Injection System

These well established engine types are used in various applications all
around the world. Based on long-term experience, the engines have been
subject to constant development improving their power, emissions, fuel oil
consumption and reliability, making them the prime mover of choice in the
maritime sector.
62
Engine Power
The engine brake power is stated in kW. For conversion between kW and
metric horsepower, please note that 1 bhp = 75 kpm/s = 0.7355 kW.
Ratings are given according to ISO 3046-1:2002.

According ISO 15550:2002,the power figures in the tables remain valid
within a range of +/- 3% up to tropical conditions at sea level, i.e.
compressor inlet temperature 45 °C
compressor inlet pressure 1,000 mbar
seawater temperature 32 °C.
For all medium speed propulsion engines except 28/33D and 28/33D STC
the power is defined according ICN1 definition (ISO 3046-1:2002 : ISO stan-
dard power).
The engine rated power for V28/33D and V28/33D STC refers to ICFN1
power definition (ISO 3046:2002 : ISO standard fuel stop power)
Additionaly two different load profile types are considered for 28/33D and
28/33D STC depending on the engine application.
Load proﬁle type: Navy Load proﬁle type: Ferry

Time [%] Time [%]
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
10 10
0 0
Load: 0% to 10% 10% to 70% 70% to 100% Load: 0% to 10% 10% to 88% 88% to 100%
Typical use : Fast yachts Typical use : Ferries
Corvettes Catamaran
Frigates Commercial vessel
OPV
1
IC[F]N according ISO 3046-1:2002 :
I = ISO Power - C= Continuous Power Output - [ F = Fuel Stop Power] - N = Net
63
Specific Fuel Oil Consumption (SFOC) & Heat Rate
The stated consumption figures refer to the following ISO reference
conditions:
ambient air pressure 1,000 mbar
ambient air temperature 25 °C (77 °F)
cooling water temperature
upstream of charge air cooler 25 °C (77 °F).
The figures are given with a tolerance of +5% and without engine driven
pumps. Attached pumps and engines running in suction dredger operation
will require additional fuel.
The SFOC figures for engines in diesel operation are based on a lower
calorific value of the fuel of 42,700 kJ/kg.
Specific Lube Oil Consumption (SLOC)

The specific lube oil consumption is specified at MCR (Maximum Continu-
ous Rating) with a tolerance of 20%.
Blocking of Output
Blocking of output is made for engines driving a propeller at 100% of the
rated output. For engines powering an alternator, blocking of output is
made at 110%. However, more than 100% load may only be run for a short
period of time for recovery and prevention of a frequency drop.
Masses and Dimensions

For main marine engines, the masses stated refer to engines without a
turning wheel.
For auxiliary engines (GenSets), the masses correspond to the unit (includ-
ing alternator). The weight of the GenSets might vary depending on the
alternator make. All given masses are without lube oil and cooling water.
Dimensions and weights are given for guidance only and are subject to
change without notice. The length of the GenSet unit depends on the alter-
nator make. The centreline distance for twin engine installation is stated at
each engine type.
64
Marine Propulsion Engine with Controllable Pitch Propeller
1. Load limit curve

2. Recommended combinatory curve
3. Zero thrust curve
Operating range
MCR Maximum continuous rating.
The combinator curve has to have a sufficient distance to the load limit
curve. For overload protection, a load control is to be provided. Power
requirements from additional devices (e.g. PTO or shaft power devices) as
well as transmission losses (e.g. by gearboxes) are to be considered.
Engine Type Designation
12V28/33D STC
Appendix ‘technical key feature’ (e.g. CR, STC, TS)

Appendix ‘fuel’ for others than HFO (e.g. DF, D, G)
Stroke in cm
Bore in cm
L or V version
Number of cylinders
65
r/min Engine type
400-428 L58/64
500-514 L51/60DF V51/60DF
500-514 L48/60CR V48/60CR
500-514 L48/60B V48/60B
720-750 L32/44CR V32/44CR
720-750 L32/40 V32/40
1000-
V28/33D*
1032
1000-
V28/33D STC*
1032
L27/38
800 L27/38 (MGO)
1000 L21/31
0 5,000 10,000 15,000 20,000 25,000

kW
* The engine complies with EPA Tier 2.
66
MAN L58/64
Bore: 580 mm, Stroke: 640 mm
Speed r/min 428
mep bar 23.2
kW
6L58/64 8,400
7L58/64 9,800
8L58/64 11,200
9L58/64 12,600
Specific Fuel Oil Consumption (SFOC) to ISO conditions

MCR 100% 85%
L58/64 185 g/kWh 181 g/kWh
Specific lube oil consumption 0.8 g/kWh
Dimensions
Cyl. No. 6 7 8 9
L mm 9,190 10,600 11,600 12,600
L1 mm 7,810 8,810 9,810 10,810
W mm 3,550 3,550 3,550 3,550
Dry mass t 149 170 189 208
Minimum centreline distance for twin engine installation: 3,800 mm

Speed 400 r/min for generator drive only.
4,410
5,410
750
L1 2,300
L
67
MAN V51/60DF
Speed r/min 514 500
mep bar 19.1 19.1
kW kW
12V51/60DF 12,000 11,700
14V51/60DF 14,000 13,650
16V51/60DF 16,000 15,600
18V51/60DF 18,000 17,550
Specific Fuel Oil Consumption (SFOC) and Heat Rate to ISO conditions
MCR 100% 85%
Specific fuel oil con-
184 g/kWh 183 g/kWh
sumption (HFO)*
Heat Rate** 7,260 kJ/kWh 7,400 kJ/kWh
* Diesel or HFO fuel operation. ** Gas operation (including pilot fuel)
Dimensions
Cyl. No. 12 14 16 18
L mm 10,254 11,254 12,254 13,644
L1 mm 9,088 10,088 11,088 12,088
Dry mass t 187 213 240 265

LHVmin = 28,000 kJ/m3 (STP).
4,713
5,517
830
L1
L 2,280
68
MAN L51/60DF
Speed r/min 514 500
mep bar 19.1 19.1
kW kW
6L51/60DF 6,000 5,850
7L51/60DF 7,000 6,825
8L51/60DF 8,000 7,800
9L51/60DF 9,000 8,775
Specific Fuel Oil Consumption (SFOC) and Heat Rate to ISO conditions
MCR 100% 85%
Specific fuel oil con-
184 g/kWh 183 g/kWh
sumption (HFO)*
Heat Rate** 7,260 kJ/kWh 7,400 kJ/kWh
* Diesel or HFO fuel operation. ** Gas operation (including pilot fuel)
Dimensions
Cyl. No. 6 7 8 9
L mm 8,494 9,314 10,134 11,160
L1 mm 7,455 8,275 9,095 9,915
W mm 3,165 3,165 3,165 3,283
Dry mass t 106 119 135 148

LHVmin = 28,000 kJ/m3 (STP).
5,340
700
L1 2,100
L
69
MAN V48/60CR
Speed r/min 514 500
mep bar 25.8 26.5
kW kW
12V48/60CR 14,400 14,400
14V48/60CR 16,800 16,800
16V48/60CR 19,200 19,200
18V48/60CR 21,600 21,600

MCR 100% 85%
V48/60CR 177 g/kWh 173 g/kWh
Dimensions
Cyl. No. 12 14 16 18
L mm 10,760 11,760 13,100 14,100
L1 mm 9,088 10,088 11,088 12,088
Dry mass t 189 213 240 265
Minimum centreline distance for twin engine installation: 4,800 mm.
4,700
4,000
5,355
830
L1 2,280
L
70
MAN L48/60CR
Speed r/min 514 500
mep bar 25.8 26.5
kW kW
6L48/60CR 7,200 7,200
7L48/60CR 8,400 8,400
8L48/60CR 9,600 9,600
9L48/60CR 10,800 10,800

MCR 100% 85%
L48/60CR 179 g/kWh 175 g/kWh
Dimensions
Cyl. No. 6 7 8 9
L mm 8,615 9,435 10,460 11,425
L1 mm 7,455 8,275 9,095 9,915
W mm 3,195 3,195 3,325 3,325
Dry mass t 106 119 135 148
5,360 4,325
700
L1 2,100
L
71
MAN V48/60B
Speed r/min 514 500
mep bar 24.7 25.4
kW kW
12V48/60B 13,800 13,800
14V48/60B 16,100 16,100
16V48/60B 18,400 18,400
18V48/60B 20,700 20,700

MCR 100% 85%
V48/60B - 1) - 1)
Dimensions
Cyl. No. 12 14 16 18
L mm 10,760 11,760 13,100 14,100
L1 mm 8,915 9,915 10,915 11,915
Dry mass t 186 209 240 259

) Please contact MAN Diesel & Turbo for further information.
1
4,700
4,000
5,355
830
L1 2,280
L
72
MAN L48/60B
Speed r/min 514 500
mep bar 24.7 25.4
kW kW
6L48/60B 6,900 6,900
7L48/60B 8,050 8,050
8L48/60B 9,200 9,200
9L48/60B 10,350 10,350

MCR 100% 85%
L48/60B - 1) - 1)
Dimensions
Cyl. No. 6 7 8 9
L mm 8,615 9,435 10,460 11,425
L1 mm 7,290 8,110 8,930 9,895
W mm 3,195 3,195 3,325 3,325
Dry mass t 104 118 134 146

) Please contact MAN Diesel & Turbo for further information.
1
5,360 4,325
700
L1 2,100
L
73
MAN V32/44CR
Bore: 320 mm, Stroke : 440 mm
Speed r/min 750 720
mep bar 25.3 26.4
kW kW
12V32/44CR 6,720 6,720
14V32/44CR 7,840 7,840
16V32/44CR 8,960 8,960
18V32/44CR 10,080 10,080
20V32/44CR 11,200 11,200

MCR 100% 85%
V32/44CR 178 g/kWh 177 g/kWh
Dimensions
Cyl. No. 12 14 16 18 20
L mm 7,195 7,970 8,600 9,230 9,860
L1 mm 5,795 6,425 7,055 7,685 8,315
W mm 3,100 3,100 3,100 3,100 3,100
H mm 4,039 4,262 4,262 4,262 4,262
Dry mass* t 70 79 87 96 104

Speed 720 r/min for generator drive only
* Including built-on lube oil automatic filter, fuel oil filter and electronic equipment.
3,400
580
L1 1,790
L
74
MAN L32/44CR
Speed r/min 750 720
mep bar 25.3 26.4
kW kW
6L32/44CR 3,360 3,360
7L32/44CR 3,920 3,920
8L32/44CR 4,480 4,480
9L32/44CR 5,040 5,040
10L32/44CR 5,600 5,600

MCR 100% 85%
L32/44CR 178 g/kWh 177 g/kWh
Dimensions
Cyl. No. 6 7 8 9 10
L mm 6,312 6,924 7,454 7,984 8,603
L1 mm 5,265 5,877 6,407 6,937 7,556
W mm 2,174 2,359 2,359 2,359 2,359
H mm 4,163 4,369 4,369 4,369 4,369
Dry mass* t 39.5 44.5 49.5 53.5 58.0

* Including built-on lube oil automatic filter, fuel oil filter and electronic equipment.
3,660
H
530
L1 1,590
L
75
MAN V32/40
Speed r/min 750 720
mep bar 24.9 25.9
kW kW
12V32/40 6,000 6,000
14V32/40 7,000 7,000
16V32/40 8,000 8,000
18V32/40 9,000 9,000

MCR 100% 85%
V32/40 183 g/kWh 182 g/kWh
V32/40 FPP 185 g/kWh 185 g/kWh
Dimensions
Cyl. No. 12 14 16 18
L mm 6,915 7,545 8,365 8,995
L1 mm 5,890 6,520 7,150 7,780
W mm 3,140 3,140 3,730 3,730
H mm 4,100 4,100 4,420 4,420
Dry mass t 61 68 77 85

Fixed Pitch Propeller: 450 kW/cyl.
3,230
580
L1 1,790
L
76
MAN L32/40
Speed r/min 750 720
mep bar 24.9 25.9
kW kW
6L32/40 3,000 3,000
7L32/40 3,500 3,500
8L32/40 4,000 4,000
9L32/40 4,500 4,500

MCR 100% 85%
L32/40 183 g/kWh 182 g/kWh
L32/40 FPP 185 g/kWh 185 g/kWh
Dimensions
Cyl. No. 6 7 8 9
L mm 5,940 6,470 7,000 7,530
L1 mm 5,140 5,670 6,195 6,725
W mm 2,630 2,630 2,715 2,715
H mm 4,010 4,010 4,490 4,490
Dry mass t 38 42 47 51
Minimum centreline distance for twin engine installation: 2,500 mm 1)

Fixed Pitch Propeller: 450 kW/cyl.
) Please contact MAN Diesel & Turbo, for the precise information about the centreline
1
distance for two engines with the same cylinder number standing near to each other.
3,460
H
530
L1 1,590
L
77
MAN V28/33D
Load profile 'Ferry' Load profile 'Navy'
Speed r/min 1000 1032
mep bar 26.9 28.6
Rated power output - ICFN kW kW
12V28/33D 5,460 6,000
16V28/33D 7,280 8,000
20V28/33D 9,100 10,000

MCR 100% 190 g/kWh 193 g/kWh
MCR 85% 188 g/kWh 190 g/kWh
Specific lube oil consumption 0.4 g/kWh 1
Figures for FPP operation
Dimensions
Cyl. No. 12 16 20
L mm 5,713 6,633 7,543
Dry mass 2 t 31.9 39.9 48.0
For multi engine arrangement only

Engine fuel: Distillate according to ISO 8217 DMA
Engine is EPA Tier 2 compliant
Weight and performance parameters refer to engine with flywheel, TC silencer, at-
tached pumps, oil filters and lube oil cooler
1
Tolerance: +0.2 g/kWh
2
Tolerance: 5%
2,313
3,734
78
MAN V28/33D STC
Load profile 'Ferry' Load profile 'Navy'
Speed r/min 1000 1032
mep bar 26.9 28.6
Rated power output - ICFN kW kW
12V28/33D STC 5,460 6,000
16V28/33D STC 7,280 8,000
20V28/33D STC 9,100 10,000

MCR 100% 190 g/kWh 193 g/kWh
MCR 85% 188 g/kWh 190 g/kWh
Specific lube oil consumption 0.4 g/kWh 1
Figures for FPP operation
Dimensions
Cyl. No. 12 16 20
L mm 6,207 7,127 8,047
Dry mass 2 t 33.6 41.6 49.5
For multi engine arrangement only

Engine fuel: Distillate according to ISO 8217 DMA
Engine is EPA Tier 2 compliant
Weight and performance parameters refer to engine with flywheel, TC silencer, at-
tached pumps, oil filters and lube oil cooler
1
Tolerance: +0.2 g/kWh
2
Tolerance: 5%
2,473
3,734
79
80
MAN L27/38
Speed r/min 800 800 (MGO)
mep bar 23.5 25.2
kW kW
6L27/38 2,040 2,190
7L27/38 2,380 2,555
8L27/38 2,720 2,920
9L27/38 3,060 3,285

MCR 100% 85%
L27/38 188 g/kWh 185 g/kWh
L27/38 (MGO) 190 g/kWh 187 g/kWh
Dimensions
Cyl. No. 6 7 8 9
L mm 5,070 5,515 5,960 6,405
L1 mm 3,962 4,407 4,852 5,263
H mm 3,555 3,687 3,687 3,687
Dry mass t 29.0 32.5 36.0 39.5
2,035
2,500
530
L1 1,370
L
81
MAN L21/31
Speed r/min 1000
mep bar 24.0
kW
6L21/31 1,290
7L21/31 1,505
8L21/31 1,720
9L21/31 1,935

MCR 100% 85%
L21/31 195 g/kWh 189 g/kWh
Dimensions
Cyl. No. 6 7 8 9
L mm 4,225 4,580 4,935 5,290
L1 mm 3,285 3,640 3,995 4,350
H mm 3,115 3,267 3,267 3,267
W mm 1,695 1,695 1,820 1,820
Dry mass t 16.0 17.5 19.0 20.5
2,500
420
L1 1,065
L
82
MAN Medium Speed
Offshore and Marine GenSets
84
MAN Medium Speed Offshore and Marine GenSet engines
Engine Power [MW]

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5
V32/44CR
V32/40
L32/44CR
L32/40
L27/38/
L27/38 (MGO)
L28/32H
L21/31
L23/30H1
L16/24
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5
Electrical Power [MW]
η = 0.95
1
The engine complies with EPA Tier 2.
85
MAN V32/44CR
Diesel Electric Propulsion and Offshore version

Speed r/min 750 720
Frequency Hz 50 60
Eng. kW Gen. kW* Eng. kW Gen. kW*
12V32/44CR 6,720 6,518 6,720 6,518
14V32/44CR 7,840 7,605 7,840 7,605
16V32/44CR 8,960 8,691 8,960 8,691
18V32/44CR 10,080 9,778 10,080 9,778
20V32/44CR 11,200 10,864 11,200 10,864
Dimensions
Cyl. No. 12 14 16 18 20
A mm 5,382 6,012 6,642 7,272 7,902
B mm 4,201 4,201 4,201 4,201 4,201
C mm 11,338 11,968 12,598 13,228 13,858
H mm 5,014 5,014 5,014 5,014 5,014
Dry mass t 117 131 144 159 172
* Based on nominal generator efficiencies of 97%.
4,260
A B
C
86
MAN L32/44CR
Diesel Electric Propulsion and Offshore version

Speed r/min 750 720
Frequency Hz 50 60
6L32/44CR 3,360 3,242 3,360 3,242
7L32/44CR 3,920 3,783 3,920 3,783
8L32/44CR 4,480 4,323 4,480 4,323
9L32/44CR 5,040 4,864 5,040 4,864
10L32/44CR 5,600 5,404 5,600 5,404
Dimensions
Cyl. No. 6 7 8 9 10
L mm 10,738 11,268 11,798 12,328 12,858
L1 mm 10,150 10,693 11,236 11,779 12,309
W mm 2,490 2,490 2,573 2,573 2,573
H mm 4,768 4,768 4,955 4,955 4,955
Dry mass t 71 78 84 91 97
* Based on nominal generator efficiencies of 96.5%.
1,630
L1 2,140
L
87
MAN V32/40
Speed r/min 750 720
Frequency Hz 50 60
12V32/40 6,000 5,820 6,000 5,820
14V32/40 7,000 6,790 7,000 6,790
16V32/40 8,000 7,760 8,000 7,760
18V32/40 9,000 8,730 9,000 8,730
Dimensions
Cyl. No. 12 14 16 18
L mm 11,045 11,710 12,555 13,185
L1 mm 10,450 11,115 11,950 12,580
W mm 3,365 3,365 3,730 3,730
H mm 4,850 4,850 5,245 5,245
Dry mass t 101 113 126 138
* Based on nominal generator efficiencies of 97%
1,920
L1
L 2,340
88
MAN L32/40
Speed r/min 720 750
Frequency Hz 60 50
6L32/40 3,000 2,895 3,000 2,895
7L32/40 3,500 3,380 3,500 3,380
8L32/40 4,000 3,860 4,000 3,860
9L32/40 4,500 4,345 4,500 4,345
Dimensions
Cyl. No. 6 7 8 9
r/min 720/750 720/750 720/750 720/750
A mm 6,340 6,870 7,400 7,930
B mm 3,415 3,415 3,635 3,635
C mm 9,755 10,285 11,035 11,565
H mm 4,510 4,510 4,780 4,780
Dry Mass t 75.0 79.0 87.0 91.0
* Based on nominal generator efficiencies of 96.5%
GenSet also available with Engine L32/40CR.
A B 2,360 2,584
C Q 1,527
P Free passage between the engines, width 600 mm and height 2,000 mm
Q ~Min. distance between centre of engines: 2,835 mm (without gallery)
~3,220 mm (with gallery).
89
MAN L28/32H
Speed r/min 720 750
Frequency Hz 60 50
5L28/32H 1,050 1,000 1,100 1,045
6L28/32H 1,260 1,200 1,320 1,255
7L28/32H 1,470 1,400 1,540 1,465
8L28/32H 1,680 1,600 1,760 1,670
9L28/32H 1,890 1,800 1,980 1,880
Dimensions
Cyl. No. 5 6 7 8 9
r/min 720/750 720/750 720/750 720/750 720/750
A mm 4,279 4,759 5,499 5,979 6,199
B mm 2,400 2,510 2,680 2,770 2,690
C mm 6,679 7,269 8,179 8,749 8,889
H mm 3,184 3,184 3,374 3,374 3,534
Dry Mass t 32.6 36.3 39.4 40.7 47.1
A B 1,490 1,800
C Q 1,126
~2,850 mm (with gallery)
90
MAN L27/38
Speed r/min 720/750 720/750 (MGO)
Frequency Hz 60/50 60/50
5L27/38 1,500/1,600 1,440/1,536 - -
6L27/38 1,980 1,900 2,100 2,016
7L27/38 2,310 2,218 2,450 2,352
8L27/38 2,640 2,534 2,800 2,688
9L27/38 2,970 2,851 3,150 3,024
Dimensions
Cyl. No. 5 6 7 8 9
r/min 720/750 720/750 720/750 720/750 720/750
A mm 4,346 4,791 5,236 5,681 6,126
B mm 2,486 2,766 2,766 2,986 2,986
C mm 6,832 7,557 8,002 8,667 9,112
H mm 3,712 3,712 3,899 3,899 3,899
Dry Mass t 42.3 45.8 52.1 58.3 63.9
A B 1,480 1,770
C Q 1,285
91
MAN L23/30H
Speed r/min 720 750 900
Frequency Hz 60 50 60
Eng. kW Gen. kW* Eng. kW Gen. kW* Eng. kW Gen. kW*
5L23/30H 650 620 675 640 - -
6L23/30H 780 740 810 770 960 910
7L23/30H 910 865 945 900 1,120 1,065
8L23/30H 1,040 990 1,080 1,025 1,280 1,215
Dimensions
Cyl. No. 5 6 6 7 7 8 8
r/min 720/750 720/750 900 720/750 900 720/750 900
A mm 3,369 3,738 3,738 4,109 4,109 4,475 4,475
B mm 2,155 2,265 2,265 2,395 2,395 2,480 2,340
C mm 5,524 6,004 6,004 6,504 6,504 6,959 6,815
H mm 2,383 2,383 2,815 2,815 2,815 2,815 2,815
Dry Mass t 18.0 19.7 21.0 21.4 22.8 23.5 24.5

Engine is EPA Tier 2 compliant.
A B 1,270 1,600
C Q
Q ~Min. distance between centre of engines: 2,250 mm
92
MAN L21/31
Speed r/min 900 1,000
Frequency Hz 60 50
5L21/31 1,000 950 1,000 950
6L21/31 1,320 1,254 1,320 1,254
7L21/31 1,540 1,463 1,540 1,463
8L21/31 1,760 1,672 1,760 1,672
9L21/31 1,980 1,881 1,980 1,881
Dimensions
Cyl. No. 5 6 7 8 9
r/min 900/1000 900/1000 900/1000 900/1000 900/1000
A mm 3,959 4,314 4,669 5,024 5,379
B mm 1,870 2,000 1,970 2,250 2,400
C mm 5,829 6,314 6,639 7,274 7,779
H mm 3,183 3,183 3,289 3,289 3,289
Dry Mass t 21.5 23.7 25.9 28.5 30.9
1,200 1,400
A B
C Q
93
MAN L16/24
Speed r/min 1,200 1,000
Frequency Hz 60 50
5L16/24 500 475 450 430
6L16/24 660 625 570 542
7L16/24 770 730 665 632
8L16/24 880 835 760 722
9L16/24 990 940 855 812
Dimensions
Cyl. No. 5 6 7 8 9
r/min 1200/1000 1200/1000 1200/1000 1200/1000 1200/1000
A mm 2,751 3,026 3,501 3,776 4,051
B mm 1,400 1,490 1,585 1,680 1,680
C mm 4,151 4,516 5,086 5,456 5,731
H mm 2,457 2,457 2,495/2,457 2,495 2,495
Dry Mass t 9.5 10.5 11.4 12.4 13.1
A B 830 1,000
C Q
Q ~Min. distance between centre of engines: 1,800 mm.
94
S.E.M.T. Pielstick
Medium Speed
Propulsion Engines
U.S. Navy photo by Mass Communication Specialist 2nd Class Nathan Laird/Released without endorsement expressed or implied
96
S.E.M.T. Pielstick PC2.6 B
Speed r/min 600
mep bar 23.9
kW
12PC2.6 B 9,000
14PC2.6 B 10,500
16PC2.6 B 12,000

MCR 100% 85%
PC2.6 B - 1) - 1)
Dimensions
Cyl. No. 12 14 16
L mm 9,100 9,840 10,580
L1 mm 5,960 6,700 7,440
W mm 3,780 3,780 3,780
H mm 4,800 4,800 4,800
Dry mass t 94 104 114
1) SFOC values are project specific. Please contact MAN Diesel & Turbo for further
information.
L1
L
97
98
MAN Medium Speed
Propulsion systems
100
MAN Medium Speed Propulsion Systems
MAN Alpha controllable Pitch Propeller
T
he VBS programme features propeller blade pitch setting by a hydraulic
servo piston integrated in the propeller hub.
The figures stated after VBS indicate the propeller hub diameter.
Standard blade/hub materials are Ni-Al-bronze, stainless steel is op-
tional.
The propellers are available up to the highest ice classes. The below
standard programmes, however, are based on ‘no ice’.
VBS CP Propeller Programme
10,000
9,000
8,000
7,000 VBS2240
VBS2080
6,000
VBS
19 4
5,000 VBS
18 0 0
VBS 0
VBS 16 8
VBS 15 6 0
4,000 VBS 14 6 0
VBS 13 8 0
VBS 128 0
3,000 VBS 118 0 0
VBS 10 8
980 0
VBS
2,000 VBS 860
VBS 74
640 0
1,000
0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000
Engine Power (kW)
VBS Mk 5 CP Propeller Programme

11,000
10,000
9,000
8,000
7,000
6,000 VB
VB S2
VB S2 15
06 0
VB S1 0
VB S1 97
5,000 VB S1 89 0
VB S1 81 0
S1 73 0
64 0
VB
4,000 VB 0
S1
S1
55
45
VB
0
S1
VB
35
3,000
VB
S1
0
S1
26
VB
VB 940
0
18
S1 0
Hub sizes:
S1
VB 860
10
VB S79 0
0
S
2,000
2
VB S72 60
Small: VBS600 - 940

S 0
VB BS6 00
V S6
Medium: VBS1020 - 1640

VB
1,000 Large: VBS1730 - 2150
0
0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 55,000
Engine Power [kW]
101
MAN Standard Package Examples
Prop. Hub Gear Prop.
speed D VBS Q R Wmin K mass mass
Cyl. kW r/min mm mm mm mm mm mm t t*
L58/64
6 8,400 170 4,500 1,280 975 1,115 2,200 2,250 12.2 23.9
6 8,400 130 5,100 1,280 975 1,115 2,350 2,350 15.1 28.2
6 8,400 90 6,100 1,560 1,190 1,305 2,550 2,700 26.2 40.3
7 9,800 170 4,650 1,280 975 1,115 2,200 2,385 14.5 27.1
7 9,800 130 5,300 1,380 1,050 1,175 2,350 2,585 20.1 32.2
7 9,800 90 6,300 1,560 1,190 1,305 2,570 2,835 31.0 45.4
8 11,200 170 4,800 1,380 1,050 1,175 2,270 2,420 15.0 30.8
8 11,200 130 5,500 1,460 1,110 1,220 2,350 2,620 20.8 35.9
8 11,200 90 6,500 1,680 1,280 1,380 2,570 3,120 36.5 52.2
9 12,600 170 4,950 1,380 1,050 1,175 2,350 2,520 16.8 31.9
9 12,600 130 5,650 1,560 1,190 1,305 2,550 2,740 23.7 41.2
9 12,600 90 6,700 1,680 1,280 1,380 2,570 3,140 43.0 55.4
* Smin and propeller mass are based on 6,000 mm propeller shaft and 3,000 mm
stern tube.
Q R S~ Wmin K
3000
102
V48/60CR
12 14,400 180 4,950 1,460 1,100 1,170 2,676 2,620 19.9 34.4
12 14,400 140 5,600 1,560 1,175 1,242 2,676 2,770 27.0 40.2
12 14,400 100 6,600 1,680 1,278 1,333 2,919 3,140 42.9 49.3
14 16,800 180 5,100 1,560 1,175 1,242 2,651 2,775 23.5 38.6
14 16,800 140 5,850 1,680 1,278 1,333 2,676 2,905 31.9 50.1
14 16,800 100 6,850 1,800 1,370 1,227 2,920 3,355 48.2 62.7
16 19,200 180 5,260 1,680 1,278 1,333 2,676 2,805 26.8 46.5
16 19,200 140 6,050 1,800 1,370 1,227 2,920 3,155 37.1 58.8
16 19,200 100 7,100 1,940 1,480 1,307 3,000 3,455 57.8 74.0
18 21,600 180 5,400 1,680 1,278 1,333 2,676 2,905 30.9 50.1
18 21,600 140 6,200 1,800 1,370 1,227 2,900 3,155 37.4 61.4
18 21,600 100 7,300 1,940 1,480 1,307 3,000 3,655 68.3 77.2
L48/60CR
6 7,200 180 4,250 1,180 885 996 2,170 2,415 10.5 19.9
6 7,200 140 4,800 1,280 957 1,075 2,500 2,485 12.8 24.9
6 7,200 100 5,600 1,380 1,050 1,175 2,270 2,905 23.2 30.2
7 8,400 180 4,400 1,280 957 1,075 2,170 2,485 12.2 24.3
7 8,400 140 5,000 1,380 1,030 1,131 2,580 2,585 15.2 29.3
7 8,400 100 5,850 1,460 1,100 1,170 2,657 2,935 26.3 34.7
8 9,600 180 4,550 1,280 975 1,115 2,200 2,250 12.6 25.5
8 9,600 140 5,150 1,380 1,030 1,131 2,500 2,450 17.0 30.6
8 9,600 100 6,000 1,560 1,175 1,257 2,600 2,800 29.7 38.3
9 10,800 180 4,700 1,380 1,030 1,131 2,500 2,385 14.7 24.8
9 10,800 140 5,300 1,460 1,100 1,170 2,651 2,485 17.4 34.6
9 10,800 100 6,200 1,560 1,190 1,350 2,550 2,835 30.7 42.4
103
104
Prop. Hub
speed D VBS
Cyl. kW r/min mm mm
V32/44CR
12 6,720 200 3,800 1,180
12 6,720 160 4,400 1,180
12 6,720 120 5,250 1,380
14 7,840 200 3,950 1,280
14 7,840 160 4,550 1,380
14 7,840 120 5,400 1,380
16 8,960 200 4,050 1,380
16 8,960 160 4,650 1,380
16 8,960 120 5,550 1,460
18 10,080 200 4,150 1,380
18 10,080 160 4,750 1,460
18 10,080 120 5,700 1,560
20 11,200 200 4,250 1,380
20 11,200 160 4,850 1,460
20 11,200 120 5,850 1,560
L32/44CR
6 3,360 200 3,350 860
6 3,360 160 3,800 980
6 3,360 120 4,450 1,080
7 3,920 200 3,500 980
7 3,920 160 3,950 1,080
7 3,920 120 4,600 1,180
8 4,480 200 3,600 1,080
8 4,480 160 4,050 1,080
8 4,480 120 4,750 1,180
9 5,040 200 3,650 1,080
9 5,040 160 4,150 1,080
9 5,040 120 4,900 1,280
10 5,600 200 3,700 1,180
10 5,600 160 4,250 1,180
10 5,600 120 5,000 1,280
stern tube.
105
V32/40
12 6,000 200 3,950 1,080 821 880 1,560 2,090 8.5 16.2
12 6,000 160 4,400 1,180 821 945 1,630 2,220 10.6 16.8
12 6,000 120 5,050 1,280 957 1,075 1,700 2,590 19.5 23.6
14 7,000 200 4,100 1,180 821 945 1,630 2,165 8.9 16.7
14 7,000 160 4,550 1,180 885 996 1,650 2,365 12.5 19.2
14 7,000 120 5,250 1,380 957 1,075 1,700 2,785 22.0 26.7
16 8,000 200 4,200 1,180 885 996 1,630 2,295 10.5 20.8
16 8,000 160 4,700 1,280 885 996 1,700 2,465 14.5 22.6
16 8,000 120 5,400 1,380 1,030 1,131 1,740 2,815 25.1 29.6
18 9,000 200 4,300 1,280 885 1,021 1,650 2,295 10.7 20.7
18 9,000 160 4,850 1,280 957 1,075 1,700 2,465 14.8 23.4
18 9,000 120 5,600 1,460 1,100 1,170 1,780 2,915 29.4 33.1
L32/40
6 3,000 200 3,300 860 655 735 1,400 1,740 4.5 8.8
6 3,000 160 3,700 980 655 735 1,520 1,830 5.6 9.9
6 3,000 120 4,200 1,080 820 805 1,520 2,130 9.8 12.4
7 3,500 200 3,450 980 655 735 1,400 1,740 4.6 9.7
7 3,500 160 3,850 980 746 785 1,520 1,880 6.5 11.8
7 3,500 120 4,400 1,080 820 875 1,560 2,130 10.1 14.5
8 4,000 200 3,550 980 655 735 1,520 1,920 5.7 10.4
8 4,000 160 4,000 1,080 820 805 1,520 2,030 7.4 12.6
8 4,000 120 4,550 1,180 885 880 1,630 2,290 11.9 16.4
9 4,500 200 3,650 980 746 785 1,520 1,920 5.8 12.2
9 4,500 160 4,100 1,080 820 805 1,560 2,090 9.0 13.2
9 4,500 120 4,650 1,180 885 880 1,630 2,390 13.9 17.2
stern tube.
106
L27/38
6 2,040 256 2,650 740 569 655 1,300 2,279 8.5 4.7
6 2,040 208 2,950 740 569 655 1,300 2,279 8.5 5.3
6 2,040 177 3,200 860 653 743 1,400 2,279 8.5 5.7
6 2,040 145 3,500 860 653 743 1,400 2,279 8.5 7.0
6 2,040 133 3,650 860 653 743 1,400 3,071 14.0 7.3
7 2,380 256 2,800 740 569 655 1,300 2,279 8.5 5.3
7 2,380 208 3,100 860 653 743 1,400 2,279 8.5 6.4
7 2,380 177 3,350 860 653 743 1,400 2,279 8.5 6.6
7 2,380 145 3,650 860 653 743 1,450 2,279 8.5 7.7
7 2,380 133 3,800 980 746 806 1,500 3,071 14.0 9.4
8 2,720 256 2,900 860 653 743 1,400 2,279 8.5 6.4
8 2,720 208 3,200 860 653 743 1,400 2,279 8.5 6.8
8 2,720 177 3,450 860 653 743 1,450 2,279 8.5 7.6
8 2,720 161 3,600 860 653 743 1,450 2,279 8.5 7.8
8 2,720 133 3,950 980 746 806 1,500 3,071 14.0 9.6
9 3,060 256 2,950 860 653 743 1,400 2,279 8.5 6.7
9 3,060 208 3,300 860 653 743 1,400 2,279 8.5 7.1
9 3,060 177 3,550 860 653 743 1,400 2,279 8.5 8.1
9 3,060 161 3,700 980 746 806 1,500 2,279 8.5 9.4
9 3,060 133 4,050 980 746 806 1,550 3,071 14.0 10.0
* Smin and propeller mass are based on 4,000 mm propeller shaft and 2,000 mm stern
tube for 21/31, 27/38 and 6,000 mm propeller shaft and 3,000 mm stem tube for the
other types.
Q R S~2000 Wmin K
107
L21/31
6 1,290 270 2,350 640 550 596 1,200 2,241 4.9 3.2
6 1,290 218 2,600 640 550 596 1,200 2,241 4.9 3.6
6 1,290 190 2,800 740 569 655 1,300 2,241 6.4 4.5
6 1,290 167 3,000 740 569 655 1,300 2,241 6.4 5.7
7 1,505 270 2,500 640 550 596 1,200 2,241 4.9 3.6
7 1,505 218 2,750 740 569 655 1,300 2,241 4.9 4.4
7 1,505 190 2,950 740 569 655 1,300 2,241 6.4 4.9
7 1,505 167 3,150 860 653 743 1,400 2,241 6.4 6.2
8 1,720 278 2,550 640 550 596 1,200 2,241 6.1 3.7
8 1,720 218 2,850 740 569 655 1,300 2,241 6.1 4.6
8 1,720 190 3,050 740 569 655 1,300 2,241 6.4 6.1
8 1,720 167 3,250 860 653 743 1,400 2,241 6.4 6.5
9 1,935 278 2,600 740 569 655 1,300 2,241 6.1 4.5
9 1,935 218 2,900 740 569 655 1,300 2,241 6.1 5.0
9 1,935 194 3,100 860 653 743 1,400 2,241 8.5 6.4
9 1,935 182 3,200 860 653 743 1,400 2,241 8.5 7.0
* S min and propeller mass are based on 4,000 mm propeller shaft and 2,000 mm stern
tube for 21/31, 27/38 and 6,000 mm propeller shaft and 3,000 mm stem tube for the
other types.
Q R S~2000 Wmin K
108
MAN Exhaust Gas
Turbochargers
MAN Exhaust Gas Turbochargers
TCR and NR types with radial flow turbine and TCA types with axial
flow turbine
Straightforward design, uncooled gas casings, inboard bearing
arrangement, plain bearings
Lube oil supply from the engine
High availability, reliability, durability
High efficiency
Easy maintenance and servicing
Long lifetimes of components
Long intervals between overhauls
Applications for Marine and Stationary

Propulsion units
Generating sets
Diesel and dual fuel engines
Gas engines
HFO engines
Special Equipment
Tailormade solutions
Power Turbines (PTG)
Turbo Compound Systems (TCS - PTG)
with Power Turbine Generator
Variable Turbine Area (VTA)
110
MAN Exhaust Gas Turbochargers
MAN Turbocharger types TCA
Compressor Volume Flow Vc tot [m 3/s]
4 5 6 7 8 9 10 15 20 30 40 50 60
Compressor Pressure Ratio πc tot
6.0
5.5
5.0 TCA33 TCA44 TCA55 TCA66 TCA77 TCA88
4.5
4.0
3.5 TCA44 TCA55 TCA66 TCA77 TCA88 TCA88-25
3.0
four-stroke version two-stroke version
MAN Turbocharger types TCR

Compressor Volume Flow Vc tot [m 3/s]
1 2 3 4 5 6 7 8 10 15
Compressor Pressure Ratio πc tot
6.0
5.5
5.0 TCR10 TCR12 TCR14 TCR16 TCR18 TCR20 TCR22

TCR10 TCR12 TCR14 TCR16 TCR18 TCR20 TCR22
4.5
TCR18 TCR20 TCR22 TCR22-25
4.0
3.5
3.0
high pressure four-stroke version standard four-stroke version two-stroke version
111
MAN TCA Series
Main features
Turbine type Axial flow turbine
Max. permiss. temp. 500 °C 2-stroke / 650 °C 4-stroke
Pressure ratio up to 5.5
Suitable for HFO, MDO, Gas
Turbocharger programme
Max. supercharged engine Max.
Turbocharger
output kW permissible
type 2-stroke 4-stroke Speed Mass
le* = 9 kg/kWh le* = 6.5 kg/kWh rpm kg
TCA33 - 5,300 27,800 1,140
TCA44 6,200 7,900 22,700 1,970
TCA55 8,000 10,400 20,000 3,290
TCA66 11,600 14,800 16,900 5,510
TCA77 16,600 20,900 14,200 9,250
TCA88 27,200 29,800 12,000 15,790
* Specific air consumption
112
MAN TCR Series
Main features
Turbine type Radial flow turbine
Max. permiss. temp. 700 °C
Max. supercharged engine Max.
Turbocharger
output kW permissible
type 2-stroke 4-stroke Speed Mass
le* = 8 kg/kWh le* = 6.5 kg/kWh rpm kg
TCR10 - 550 85,000 40
TCR12 - 800 70,900 100
TCR14 - 1,200 58,700 135
TCR16 - 1,750 48,800 205
TCR18 2,400 2,600 40,300 350
TCR20 3,500 3,800 33,400 600
TCR22 6,200 6,500 25,600 1,400
* Specific air consumption
113
MAN NA/S/T9 Series
Main features
Turbine type Axial flow turbine
Max. permiss. temp. 650 °C
Turbocharger Max. supercharged Max. permissible Mass
type engine output kW speed rpm kg
NA29/S 3,600 31,300 1,050
NA34/S 5,100 26,300 1,350
NA40/S 7,300 22,400 2,200
NA48/S 11,000 18,600 3,700
NA57/T9* 16,100 15,000 5,100
NA70/T9** 24,500 12,000 9,800
* Pressure ratio up to 4.2

** Pressure ratio up to 4.0
Specific air consumption Ie = 6.5 kg/kWh
114
MAN NR/S Series
Main features
Turbine type Radial flow turbine
Max. permiss. temp. 650 °C (opt. 720 °C)
Turbocharger Max. supercharged Max. permissible Mass
type engine output kW speed rpm kg
NR12/S 670 75,000 155
NR14/S 950 64,000 190
NR17/S 1,350 52,600 260
NR20/S 1,870 44,700 350
NR24/S 2,690 37,300 505
NR29/S 3,820 31,300 780
NR34/S 5,400 26,300 1,450
Specific air consumption Ie = 7 kg/kWh
115
MAN (TCS-) PTG Power Turbines
Exhaust Gas Turbine
Newly developed high efficiency turbine
New turbine nozzle ring with extended life time
Bearing arrangement with long life time
Axial: Based on most modern TCA series
Radial: Based on most modern TCR series
Gearbox
High efficiency high speed gearbox reducing turbine speed to
generator speed
Couplings
Gearbox to generator: High flexible coupling
Generator
Synchronous generator suited to marine applications
Asynchronous generator suited to stationary applications
Exhaust Gas System

Control valves for power turbine operating range
Fast acting emergency valves for emergency shutdown
Control and saftey equipment
Optional: Variable Turbine Area (VTA) for Exhaust Gas Turbine

Increasing efficiency and flexibility of operation
Funnel (Boiler)
Turbochargers
Exhaust gas receiver

Gearbox
Coupling
Generator
Main engine
Exhaust gas turbine

Board grid
116
MAN (TCS-) PTG Power Turbines
Main Features Power Turbines
Turbine type Radial or Axial
Max. permiss. temp. 550 ºC
Output shaft speed 1,800 rpm (1,500 rpm)
Radial flow turbine

Max. output Max. flow rate Speed
kW kg/s PT 1/min
Temperature before
∏T = 3.6
turbine 450 °C
(TCS-) PTG18 960 6.7 34,000
(TCS-) PTG20 1,400 9.7 28,000
(TCS-) PTG22 2,420 16.6 21,000
Axial flow turbine

(TCS-) PTG55 3,650 23.2 16,000
(TCS-) PTG66 5,140 32.7 13,500
PTG
TCS - PTG
117
MAN Variable Turbine Area (VTA)
Variable Turbine Area (VTA)
The VTA system consists of a nozzle ring equipped with adjustable vanes
which optionally replace the fixed-vane nozzle rings in MAN Diesel & Tur-
bo’s standard TCA and TCR turbochargers.
By altering the pitch of the adjustable vanes, the pressure of the exhaust
gases on the turbine is regulated and thus the volume of charge air can be
precisely matched to the quantity of injected fuel at all points in an engine’s
load and speed range. The result is reduced specific fuel consumption, re-
duced emissions HC and CO2 and improved engine response.
Benefits of VTA
Up to 5g/kWh lower fuel consumption
Lower soot and smoke emission
Lower CO2 emissions
Lower particle emissions
Suitable for TCA and TCR turbochargers
Retrofit packages
Short payback time
VTA cuts fuel consumption and reduces emissions
118
Contacts
List of Licensees
Symbols used:
T: MAN Diesel & Turbo Two-stroke licence
F: MAN Diesel & Turbo Four-stroke licence
FS: MAN Diesel & Turbo Four-stroke SEMT Pielstick licence
P: MAN Diesel & Turbo Propeller licence
TC: MAN Diesel & Turbo Turbocharger licence
China, The People’s Republic of

CSSC-MES Diesel Co., Ltd. (T)
Tel.: +86 (21) 6118 6666 / 6118 6656
Fax: +86 (21) 6118 8088 / 6118 6655
market@shcmd.com.cn
CSR ZiYang Locomotive Co., Ltd. (F)

Tel.: +86 28 2628 1990
Fax: +86 28 2665 3416
lfl431@zyloco.com
Dalian Marine Diesel Co. Ltd. (T)

Tel.: +86 (411) 8441 77 24
Fax: +86 (411) 8441 74 99
dmd@online.in.cn
ZGPT Diesel Heavy Industry Co., Ltd. (F)

Tel.: +86 (571) 8672 6666
Fax: +86 (571) 8768 0980
g-engineer@163.com
Hefei Rong An Power Machinery Co., Ltd. (T, F)

Tel.: +86 (551) 87 88888-9977
Fax: +86 (551) 87 88888-1001
Henan Diesel Engine Heavy Industry Co., Ltd. (F)

Tel.: +86 (379) 6407 6362
Fax: +86 (379) 6422 5395
hnd@hnd.com.cn
Hudong Heavy Machinery Co., Ltd. (T, FS)

Tel.: +86 (21) 58 71 32 22
Fax: +86 (21) 58 46 20 23
tech@hhm.com.cn
120
List of Licensees
Jiangsu Antai Power Machinery Co., Ltd. (T)
Tel.: +86 523 8235 5888
Fax: +86 523 8235 5898
Jiangsu Guotai Marine Diesel Manufacture Co., Ltd. (F)

Tel.: +86 510 8501 2959
Fax: +86 510 8505 2002
xunian_xunian@yahoo.com.cn
CNPC Jichai Power Equipment Company (F)

Tel.: +86 531 874 23 110
Fax: +86 531 874 23 189
lishusheng@cnpc.com.cn
Shaanxi Diesel Engine Heavy Industry Co., Ltd. (F, FS)

Tel.: +86 29 3831 3596
Fax: +86 29 3831 4626
sxd408@public.xa.sh.cn
Shanghai Qiyao Engine Co., Ltd. (SQE) (F, TC)

Tel.: +86 (21) 3131 0688
Fax: +86 (21) 3131 0150
admin@chsqe.com
Weichai Heavy Machinery Co., Ltd. (F)

Tel.: +86 536 229 7186
Fax: +86 536 819 7186
julidj@weichaihm.com
STX (Dalian) Engine Co., Ltd. (T)

Tel.: +86 411 3939 2681
Fax: +86 411 3939 4409
cs@onestx.com
STX Heavy Industry Fushun Co., Ltd. (F)

Tel.: +86 413 764 2451
Fax: +86 413 764 2165
yskim@onestx.com
Wuhan Marine Machinery Plant Co., Ltd. (P)

Tel.: +86 413 764 2451
Fax: +86 413 764 2165
wmmp@public.wh.hb.cn
121
List of Licensees
Yichang Marine Diesel Engine Plant (T)
Tel.: +86 (717) 646 89 50
Fax: +86 (717) 646 91 52
jsb-sj1@ymd.com.cn
Zhejiang Yungpu Heavy Machinery Co., Ltd. (T)

Tel.: +86 (574) 8775 2109
Fax: +86 (674) 8775 6578
yp@xsg.cn
Zhenjiang CME Co., Ltd (T, F)

Tel.: +86 (511) 45 11 880
Fax: +86 (511) 45 10 033
zjcme@zjcme.cn
Zhongji Hitachi Zosen Diesel Engine Co., Ltd. (T)

Tel.: +86 580 806 2028
Fax: +86 580 806 2026
Croatia
Adriadiesel d. d. (F)
Tel.: +385 (47) 843 370
Fax: +385 (47) 434 380
adriadiesel@adriadiesel.hr
Brodosplit – Diesel Engine Factory d.o.o. (T, F)

Tel.: +385 (21) 382 863
Fax: +385 (21) 382 323
strobrod@brodost.tel.hr
Uljanik Strojogradnja d.d. (T)

Tel.: +385 (52) 373 309
Fax: +385 (52) 373 821
diesel@uljanik.hr
Czech Republic
PBS Turbo s.r.o. (TC)
Tel.: +420 (566) 822 201
Fax: +420 (566) 822 272
122
List of Licensees
India
Kirloskar Oil Engines Ltd. (FS)
Tel.: +91 20 25 81 03 41
Fax: +91 20 25 81 32 08
madhav.chandrachud@kirloskar.com
Japan
Hitachi Zosen Corporation (T)
Machinery Division
Tel.: +81 (6) 6569 0206
Fax: +81 (6) 6569 0218
de-info@hitachizosen.co.jp
JFE Engineering Corporation (FS)

Tel.: +81 (45) 505 7885
Fax: +81 (45) 505 7882
www.jfe-eng.co.jp
Kawasaki Heavy Industries Ltd. (T, F, TC, FS)

Tel.: +81 (78) 682 5340
Fax: +81 (78) 682 5558
hashimoto_h@khi.co.jp
Mitsubishi Heavy Industries Ltd. (F)

Tel.: +81 (45) 775 1220
Fax: +81 (45) 773 8514
Ryouji_Nakano@d.ydmw.mhi.co.jp
Mitsui Engineering & Shipbuilding Co., Ltd. (T, TC)

Tel.: +81 (3) 5202 3600
Fax: +81 (3) 5202 3610
suemasu@mes.co.jp
Mitsui Sub-licensee:
Makita Corporation (T)
Tel.: +81 (87) 821 5501
Fax: +81 (87) 821 5510
makita@mail.netwave.or.jp
Mitsui Sub-licensee:
Diesel United, Ltd. (T)
Tel.: +81 (79) 124 2650
Fax: +81 (79) 124 2648
info@du.ihi.co.jp
123
List of Licensees
Japan
Niigata Power Systems Co., Ltd. (FS)
Tel.: +81 (3) 6214 2800
Fax: +81 (3) 6214 2809
info1@niigata-power.com
Diesel United, Ltd. (FS)

Tel.: +81 (79) 124 2650
Fax: +81 (79) 124 2648
info@du.ihi.co.jp
Poland
H. Cegielski - Poznan S.A. (T, F)
Tel.: +48 (61) 831 1958
Fax: +48 (61) 831 1391
ts3@hcp.com.pl
Russia
Bryansk Engineering Works (T)
Tel.: +7 (04832) 55 81 80
Fax: +7 (04832) 68 78 29
post@diesel.bmz.032.ru
South Korea
Doosan Engine Co., Ltd. (T, F, FS)
Tel.: +82 (55) 260 6370
Fax: +82 (55) 260 6381
hyungkwon.park@doosan.com
Hyundai Heavy Industries Co., Ltd. (T, FS)

Engine & Machinery Division
Domestic Sales Dep't Overseas Sales Dep't
Tel.: +82 (52) 202 7291 +82 (52) 202 7281
Fax: +82 (52) 202 7300 +82 (52) 202 7427
k110@hhi.co.kr k150@hhi.co.kr
STX Engine Co., Ltd. (T, F, P, FS)

Tel.: +82 (55) 280 0568
Fax: +82 (55) 280 0539
sowy@onestx.com
124
List of Licensees
South Korea
STX Heavy Industries Co., Ltd. (T)
Tel.: +82 (55) 278 9663
Fax: +82 (55) 278 9500
mschoe@onestx.com
STX Metal Co., Ltd. (TC)

Tel.: +82 (55) 280 0682
Fax: +82 (55) 280 0539
kean@onestx.com
Spain
Navantia S.A. (F)
Fábrica De Motores Cartagena
Tel.: +34 (968) 128 200
Fax: +34 (968) 500 902
navantia@navantia.es
USA
Fairbanks Morse Engine (F, FS)
Tel.: +1 (608) 364 4411
Fax: +1 (608) 364 0382
chuck.kissee@fairbanksmorse.com
Vietnam
Vietnam Shipbuilding Industry Group (Vinashin) (T)
Tel.: +844 7711 212
Fax: +844 7711 535
phanco@bdsy.com.vn
125
World Wide Offices
ol Argentina l Canada
MAN Diesel & Turbo Argentina S.A. MAN Diesel & Turbo Canada Ltd.
Mariano Moreno 4476 710 Dorval Drive, Suite 600
CP B1605BOH - Munro, Oakville, Ontario L6K 3V7
Prov. Buenos Aires Tel.: +1 905 842 2020
Tel.: +54 11 5236 6006/07 Fax: +1 905 842 7892
Fax: +54 11 5353 0279 gunther.scholz@ca.man.eu
carsten.schrick@man.eu www.manbw.ca
ol Australia o Canary Islands

MAN Diesel & Turbo Australia Pty., Ltd. MAN Diesel & Turbo Canarias, S.L.
396, Lane Cove Road Muelle Reina Sofia s/n
North Ryde NSW 2113 Puerto de Las Palmas
Sydney Las Palmas de Gran Canaria
Tel.: +61 2 8874 0700 35008 Spain
Fax: +61 2 9889 5337 Tel.: +34 928 935 959
larry.silva@au.man.eu Fax.: +34 928 494 199
www.mandiesel.com.au jesus.montenegro@man.eu
l Belgium ol Chile
MAN Diesel & Turbo Benelux N.V. MAN Diesel & Turbo Chile Ltda.
Noorderlaan 181 Parcela 291
2030 Antwerpen - sector Placilla de Peñuelas
Tel.: +32 3 543 8500 Ruta 68 - Km. 98
Fax: +32 3 541 7508 Valparaíso
dirk.willems@man.eu Tel.: +56 32 235 1500
www.mandieselturbobenelux.com carsten.schrick@man.eu
ol Brazil o China
MAN Diesel & Turbo Brasil Ltda. MAN Diesel Shanghai Co. Ltd.
General José Cristino, 31 29F, King Tower, No. Xin Jin Qiao Rd,
São Cristóvão Pudong District,
BR-20921-400 Rio de Janeiro, RJ SHA 201206, China
Tel.: +55 21 3506 2151 Tel.: +86 21 5030 1010
Fax: +55 21 3506 2150 Fax: +86 21 5030 1130
lincoln.sousa@mandiesel.com.br goetz.kassing@cn.man.eu
www.mandiesel.com.br www.mandiesel.com.cn
ol Bulgaria l China
MAN Diesel & Turbo Bulgaria EOOD MAN Diesel Shanghai Co. Ltd.
Kv. Briz 1869 A office 1 76 Qing Da Road,
Varna 9010 Zhangjiang Hi-Tech, East Area,
Tel.: +359 5233 5960 Pudong District
Fax: +359 5233 5970 Shanghai 201203
blagoy.hristov@man.eu Tel.: +86 21 5897 6758
Fax: +86 21 5897 6552
ralph.klaunig@cn.man.eu
126 o Representative Office l Service Center

World Wide Offices
o Cyprus l Guatemala
MAN Diesel & Turbo Cyprus MAN Diesel & Turbo Guatemala Ltda.
Office 403, Taitou Court 6a. avenida 1-36 Zona 14
2M Koutsofta Str. Edificio Plaza Los Arcos Of. 4B
3031 Limassol Guatemala City, C.A.
Tel.: +357 25 342 379/746/082 Tel.: +502 2368 2744
Fax: +357 25 746 083 Fax: +502 2366 2836
hans.odgaard@man.eu michael.baier@man.eu
o Germany ol Hong Kong

MAN Diesel & Turbo SE MAN Diesel & Turbo Hong Kong Ltd.
Representative Office 5/F, No. 1-7, Sai Tso Wan Road
Baumwall 5 Tsing Yi Island, N.T.
20459 Hamburg Hong Kong SAR
Tel.: +49 40 7409 361 Tel.: +852 2527 1368
Fax: +49 40 7409 366 Fax: +852 2861 2594
wilfried.giehl@man.eu peter.kisslinger@hk.man.eu
l Germany ol India
MAN Diesel & Turbo SE MAN Diesel & Turbo India Ltd.
MAN Diesel PrimeServ (Hamburg) L-16, MIDC Industrial Area
Hachmannkai Taloja, Navi Mumbai
Rossweg 6 Dist. Raigad 410 208
20457 Hamburg Maharashtra India
Tel.: +49 40 7409 0 Tel.: +91 22 2740 3710
Fax: +49 40 7409 104 Fax: +91 22 2740 3701 / 3702
tilmann.greiner@man.eu shiv.aggarwal@in.manbw.com
www.man-india.com
l Germany
MAN Diesel & Turbo SE l Italy
Fischerweg 421 MAN Diesel & Turbo s.r.l.
18069 Rostock Via dei Pescatori - Porto Antico
Tel.: +49-381-811 3600 16129 Genova (GE)
Fax: +49-381-811 3605 Tel.: +39 010 209 1637
peter.gau@man.eu Fax: +39 010 251 6588
www.RostockDieselService.de marco.colombo@man.eu
ol Greece ol Japan
MAN Diesel & Turbo Hellas Ltd. MAN Diesel & Turbo Japan Ltd.
Akti Miaouli 89 Kobe Kokusai Kaikan 16F
185 38 Piraeus 8-1-6 Goko-dori Chuo-ku
Tel.: +30 210 45 87 900 Kobe 651-0087
Fax: +30 210 45 87 928/29 Tel.: +81 78 261 9645/9646
dimitris.vlantos@man.eu Fax: +81 78 261 9649
sasaki@mandiesel.jp
www.mandiesel.jp
o Representative Office l Service Center 127

World Wide Offices
ol Netherlands ol Portugal
MAN Diesel & Turbo Benelux B.V. MAN Diesel & Turbo Portugal,
Schiekade 36 Unipessoal, Lda.
3125 KJ Schiedam (Port of Rotterdam) Avenida do Rio Tejo, lote 3
Tel.: +31 10 272 4500 Parque Industrial Sapec Bay
Fax: +31 10 437 6115 2910-440 Setúbal
dirk.willems@man.eu Tel.: +351 265 799 500
www.mandieselturbobenelux.com Fax: +351 265 751 460
jesperb.weller@man.eu
ol Norway
MAN Diesel & Turbo Norge A/S ol Qatar
Haakon VII's gate 1 MAN Diesel & Turbo Qatar
0161 Oslo Navigation L.L.C
Tel.: +47 2201 7190 60, Al Tameen Street
Fax: +47 2283 2416 153 West Bay, Doha
harald.fondenaer@man.eu State of Qatar
Tel.: +974 3381 9414
l Pakistan oles.jensen@man.eu
MAN Diesel & Turbo Operations
Pakistan, Private Limited ol Russian Federation
6-Km Raiwind Road MAN Diesel & Turbo Russia Ltd.
Lahore-55150 Electrozavodskaya Street 27/8
Tel.: +92 42 3533 0091-3 107 023 Moscow
Fax: +92 42 3533 0094 Tel.: +7 495 258 36 70
imran.ghani@mandiesel.com.pk Fax: +7 495 258 36 71
uwe.neumann@man.eu
l Panama www.man-russia.com
MAN Diesel & Turbo Panama
Enterprises Inc ol Saudi Arabia
Calle Arturo del Valle, MAN Diesel & Turbo Saudi Arabia LLC
Final Local 0-02 Madina Road
Urb. La Loceria Al Thinayyan Building
Tel.: +507 236 1594 P.O.Box: 55990
Fax: +507 236 8229 Jeddah 21544
ralf.oldenburg@man.eu Saudi Arabia
Tel: +966 2 639 4346
ol Poland Fax: +966 2 639 5482
MAN Diesel & Turbo Poland Sp. z o.o. syed.shahnawaz@sa.man.eu
ul. Lubowidzka 43
80-174 Gdansk ol Singapore
Tel.: +48 58 325 33 90 MAN Diesel & Turbo Singapore Pte.
Mob: +48 502 536 800 Ltd.
mandiesel-poland@mandiesel.com 29 Tuas Avenue 2
Andrzej.Krupa@man.eu Singapore 639460
Tel.: +65 6349 1600
Fax: +65 6862 1409
patrice.mauger@sg.man.eu

World Wide Offices
ol South Africa l Turkey
MAN Diesel & Turbo MAN Diesel ve Turbo Satis Servis
South Africa (Pty) Ltd. Limited Sirketi
Unit 1 Table Bay Industrial Park (Hizmetleri Limited Sirketi)
Milner St. Orhanli Aydinli Yolu Uzeri
Paarden Eiland 7405, Cape town Deri Org. Yan San. Sit. YB-5
Tel.: +27 21 514 3360 Parsel
Fax: +27 21 510 0174 34367 Tuzla – Istanbul
tom.martin@za.man.eu Tel.: +90 216 581 9900
Fax: +90 216 591 0854
ol South Korea timur.iyi@man.eu
MAN Diesel & Turbo Korea Ltd.
1606-1 SongJeong-Dong ol United Arab Emirates
GangSeo-Gu MAN Diesel & Turbo Middle East LLC
Busan Jumeira Beach road
Korea 618-819 at Dry docks World Dubai
Tel.: +82 51 635 6644 P.O. BOX 57091
Fax: +82 51 635 4004 Dubai, U.A.E
KK.Lee@kr.man.eu Tel.: +971-4-345 40 45
Fax: +971-4-345 40 48
ol Spain olaf.gunia@ae.man.eu
MAN Diesel & Turbo Espana, S.A.U. www.man-middleeast.com
Calle Pedro Teixeira 8, 10th floor
28020 Madrid ol United Kingdom
Tel.: +34 91 411 1413 MAN Diesel & Turbo UK Ltd.
Fax: +34 91 411 7276 Diesel & Turbo new engine sales
alejandro.held@man.eu Betchworth House
57-65 Station Road
ol Sweden Redhill
MAN Diesel & Turbo Sverige AB Surrey, RH 1 1 DL
Banehagsliden 5 Tel.: +44 1737 779 429
414 51 Göteborg Fax: +44 1737 781 299
Tel.: +46 31 176 295 howard.white@man.eu
Fax: +46 31 131 564
ulf.backstrom@man.eu l United Kingdom
MAN Diesel & Turbo UK Ltd.
o Turkey PrimeServ Diesel
MAN Diesel ve Turbo Satis Servis Hythe Hill
Limited Sirketi Colchester
Cumhuriyet Cad. Hava Palas Essex
Apt. No: 99/5 CO1 2HW
34373 Elmadag – Sisli Tel.: +44 1206 795 151
Istanbul Fax: +44 1206 794 325
Tel.: +90 212 219 18 93 chris.betts@man.eu
Fax: +90 212 219 18 96
timur.iyi@man.eu

World Wide Offices
l United Kingdom
MAN Diesel & Turbo UK Ltd.
PrimeServ Diesel
Gwash Way Industrial Estate
Ryhall Road,
Stamford
Lincolnshire
PE9 1XP
Tel.: +44 1780 764 641
Fax: +44 1780 756 694
philip.heathcote@man.eu
ol USA
MAN Diesel & Turbo North America Inc.
2 Amboy Avenue
P.O. Box 5043
Woodbridge, NJ 07095
Tel.: +1 732 582 8200
Fax: +1 732 582 0032
poul.korsgaard@us.man.eu

Branch Offices
l Brazil o China
MAN Diesel & Turbo Brasil Ltda. MAN Diesel Shanghai Co. Ltd.
Branch Office Manaus – Am Branch Office Beijing
Av. Pres. Kennedy, 651 10F, 1001-1008, CYTS
Morro da Liberdade (Zhong Qin Lv) Plaza,
69074-000 Manaus – Am Dongzhimen South Ave.
Tel.: +55 92 3624 2424 Dongcheng District,
Fax: +55 92 3624 5853 Beijing 100007
marcos.macedo@mandiesel.com.br Tel: +86 10 5815 6015
Fax: +86 10 5815 6017
l China virginia.wang@cn.man.eu
MAN Diesel Shanghai Co. Ltd.
Branch Office Dalian l France
Zhong Yuan Road 80, MAN Diesel & Turbo France SAS
Gan Jin Zi District PrimeServ Marseille
Dalian 116113 2 BD des Bassins de Radoub
Tel.: +86 411 8710 8633 CS 11541
Fax: +86 411 8710 8233 13236 Marseille Cedex 02
zhao.encai@cn.man.eu Tel./Fax: +33 491 630 134
Mobile: +33 670 540 566
ol China remi.leport@man.eu
Branch Office Zhejiang l India
Liuheng Putuo, MAN Diesel & Turbo India Ltd.
Zhoushan, Branch Office Aurangabad
Zhejiang 316131 E-73, MIDC Waluj 431 136
Tel: +86 0580 6189 520 Aurangabad
Fax: +86 0580 6189 520 Maharashtra
peter.zhang@cn.man.eu Tel: +91 240 2566 700
Fax: +91 240 2554 621
o China shiv.aggarwal@in.manbw.com
Branch Office Guangzhou ol Malaysia
No. 828 Mao Gang Road, MAN Diesel & Turbo Singapore Pte. Ltd.
Huangpu District Branch Office Petaling Jaya
Guangzhou 510700 Unit 851, Block A2
Tel.: +86 20 3238 7997 Leisure Commerce Square
Fax: +86 20 3238 7997 No 9. Jalan JS 8/9
jane.tan@cn.man.eu 46150
Selangor Darul Ehsan
Tel.: +60 3 7875 7513
Fax: +60 3 7875 7524
oeambw@tm.net.my

Branch Offices
o Norway l South Africa
MAN Diesel & Turbo Norge A/S MAN Diesel & Turbo
Branch Office Ålesund South Africa (Pty) Ltd.
Molovegen 5 Branch Office Durban
6004 Ålesund 14 Hopson Avenue
Norge 70 11 65 90 Glenwood 3630
Tel.: +47 70 11 6590 Durban
Fax: +47 70 11 1211 Tel.: +27 31 301 2999
oleandre.grebstad@man.eu Fax: +27 31 201 0854
werner.krisch@za.man.eu
l Norway
MAN Diesel & Turbo Norge A/S ol Taiwan
Branch Office Bergen MAN Diesel & Turbo Singapore Pte. Ltd.
Postboks 2033 Nordnes Branch Office Taipei
5817 Bergen 8F-1, No. 15, Sec. 2, Tiding Blvd.
Tel.: +47 5523 6050 Nei-Hu District,
Fax: +47 5523 6051 Taipei 11493
arne.fagerbakke@man.eu Tel.: +886 2 8752 4043
Fax: +886 2 8752 4053
ol Philippines steen.schou@manbw.com.tw
MAN Diesel & Turbo Singapore Pte. Ltd.
Branch Office Paranaque City o USA
Km. 17, West Service Road MAN Diesel & Turbo North America Inc.
Cervantes Compound Brgy. Branch Office Washington
Marcelo Green 4401 Ford Ave., Suite 410
South Superhighway Alexandria, VA 22302
Paranaque City, 1700 Tel: +1 703 373 0690
Tel.: +63 2 776 3369/3347 Fax: +1 703 373 0688
Fax: +63 2 776 3384 philip.wasinger@us.man.eu
sebastien.marchand@man.eu
www.manbw.com.ph
ol USA
ol Russia MAN Diesel & Turbo North America Inc.
MAN Diesel & Turbo Russia Ltd. Branch Office Ft. Lauderdale
Branch Offce St. Petersburg 551 S.W. 13th Terrace
Vilensky 4 Pompano Beach, FL 33069
191014 St. Petersburg Tel.: +1 954 960 6700
Tel.: +7 812 740 1322 Fax: +1 954 782 5426
Fax: +7 812 740 1323 les.gingell@us.man.eu
alexander.nesterchuk@man.eu

Branch Offices
ol USA
Branch Office Houston
1600A Brittmoore Road
Houston, TX 77043
Tel.: +1 832 209 3400
Fax: +1 713 939 0105
anthony.thompson@us.man.eu
ol USA
Branch Office Los Angeles
24341 South Wilmington Avenue
Carson, CA 90745
Tel.: +1 310 547 8700
Fax: +1 310 547 8705
frank.hansen@us.man.eu
ol USA
Branch Office Seattle
6608 South 211th Street, Suite 101
Kent, Wa 98032
Tel.: +1 253 479 6800
Fax: +1 253 479 6899
martin.jensen.b@us.man.eu
ol Vietnam
MAN Diesel & Turbo Singapore Pte. Ltd.
Branch Office Hanoi
Unit 9, Second Floor,
International Central
17 Ngo Quyen, Hoan Kiem
Hanoi
Tel.: +84 4 3936 9728
Fax: +84 4 3936 9727
hoanghai.tran@man.eu

Main Locations
Germany - Headquarters Denmark - Headquarters
MAN Medium Speed Propulsion MAN B&W Low Speed Engines:
Engines and Propulsion Systems: MAN Diesel & Turbo
MAN Diesel & Turbo SE Teglholmsgade 41
Stadtbachstrasse 1 DK-2450 Copenhagen SV
D-86153 Augsburg Tel.: +45 3385 1100
Tel.: +49 821 322 0 Fax +45 3385 1030
Fax: +49 821 322 3382 info-cph@mandieselturbo.com
info-aug@mandieselturbo.com
France - Headquarters United Kingdom - Headquarters

MAN Medium Speed Propulsion Aftermarket Support of High and
Engines, Propulsion Systems and Medium Speed Engines for
Marine GenSets: Marine, Power and Traction
MAN Diesel & Turbo France SAS (Original Brands of: Mirrlees
Le Ronsard Paris Nord 2 Blackstone, Ruston and Paxman):
22 Avenue des Nations MAN Diesel & Turbo UK Ltd.
BP 84013 Villepinte 1 Mirrlees Drive,
F-95931 Roissy Ch de Gaulle Cedex Hazel Grove
Tel.: +33 1 48 17 63 00 UK-Stockport, SK7 5BP
Fax: +33 1 48 17 63 49 Tel.: +44 161 419 3105
info-fr@mandieselturbo.com Fax: +44 161 426 4596
primeserv-uk@mandieselturbo.com
Denmark Germany
ALPHA CP Propellers, MAN Exhaust Gas Turbochargers:
Gears & Aft-ship systems, MAN Diesel & Turbo SE
MAN Offshore projects: Stadtbachstrasse 1
MAN Diesel & Turbo D-86224 Augsburg
Niels Juels Vej 15 Tel.: +49 821-322 1345
DK-9900 Frederikshavn Fax: +49 821-322 3299
Tel.: +45 9620 4100 turbochargers@mandieselturbo.com
Fax: +45 9620 4030
info-frh@mandieselturbo.com
China
MAN Exhaust Gas Turbochargers:
MAN Medium Speed Marine MAN Diesel Turbochargers Shanghai
GenSets: Co. Ltd.
MAN Diesel & Turbo Wai Gao Qiao FTZ
H. Christoffersensvej 6 Ao Na Road 151
DK-4960 Holeby CN-Shanghai 200131
Tel.: +45 5469 3100 Tel: +86 21 5866 2108
Fax: +45 5469 3041 Fax: +86 21 6843 0118
info-hol@mandieselturbo.com Dai.jun@cn.man.eu
134
Main Locations
Czech Republic
MAN Exhaust Gas Turbochargers:
PBS Turbo s.r.o.
Velká Bíteš
Vlkovská 279
CZ-595 01 Velká Bíteš
Tel.: +420-566 822 201
Fax: +420-566 822 272
pbst_sales@pbsvb.cz
France
MAN Medium Speed Propulsion
Engines, Propulsion Systems and
Marine GenSets:
MAN Diesel & Turbo France SAS
Avenue de Chatonay Porte n° 7
BP 427
F-44615 Saint-Nazaire
Tel.: +33 240 906 500
Fax: +33 240 906 589
info-fr@mandieselturbo.com
135
Notes
136
Notes
137
Notes
138
Marine Engine
(herein referred to as “MAN Diesel & Turbo”).

registered with the Danish Commerce and Companies Agency under CVR Nr.: 31611792,
Copyright 2011 © MAN Diesel & Turbo, branch of MAN Diesel & Turbo SE, Germany,
MAN Diesel & Turbo Marine Engine IMO Tier ll Programme 3rd edition
IMO Tier ll
Programme 3rd edition 2011
This document is the product and property of MAN Diesel & Turbo
and is protected by applicable copyright laws.
Subject to modification in the interest of technical progress.
Reproduction permitted provided source is given.
4510-0009-02ppr May 2011
2011

MAN

Uploaded by

Copyright:

Available Formats

MAN

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MAN

Uploaded by

Copyright:

Available Formats

Marine Engine

(herein referred to as “MAN Diesel & Turbo”).

Depending on the subsequent specific individual projects, the relevant

If this document is delivered in another language than English and doubts

MAN B&W Low Speed Propulsion Engines 5 – 52

MAN B&W Low Speed Propulsion Systems 53 – 58

MAN Medium Speed Propulsion Engines 59 – 82

MAN Medium Speed Offshore and

S.E.M.T. Pielstick Medium Speed

MAN Medium Speed Propulsion Systems 99 – 108

MAN Exhaust Gas Turbochargers 109 – 118

Licensees 120 – 125

World Wide Offices 126 – 130

Branch Offices 131 – 133

Main Locations 134 – 135

DieselPort is MAN Diesel & Turbo’s customer extranet. A secure

The advantages of ME engines are:

 fuel optimised over a wide power range

As a standard integrated feature, ME engines are specified with MAN B&W

GI Dual Fuel Engines

 blower inlet temperature 45 °C

Specific Fuel Oil Consumption (SFOC)

Stricter emission limits can be met on request, using proven technologies.

 ambient air pressure 1,000 mbar

Most commercially available HFO with a viscosity below 700 cSt at 50 °C

When choosing an SFOC guarantee below 100%, the tolerances, which

Consequently SFOC guarantee tolerances are as follows:

Any combination of speed and power within the L4

G80ME-C9 and G50ME-B9 Available at Increased Speed with Unchanged MEP

Engine L1 speed [rpm] L1 power/cyl. [kW]

Engine L1 speed [rpm] L1 power/cyl. [kW]

NO x regulations place a limit on the SFOC on two-stroke engines. In gen-

The IMO NO x limit is given as a weighted average of the NO x emission at

Optimisation of SFOC in the part-load (50-85%) or low-load (25-70%) range

 ECT: Engine Control Tuning (only available on ME/ME-C engines)

Only high-load optimisation is available for engines with conventional ef-

The methods and options mentioned will be explained in the following.

Two different optimisation possibilities are available. With part-load optimi-

Variable Turbine Area – VT Technology (or similar)

Turbocharger (TC) Cut-out

SFOC benefits of up to 7 g/kWh can be achieved with TC cut-out at low

For more information visit: www.mandieselturbo.com → ‘Products’ →

Waste Heat Recovery

A standard WHR-matched MAN B&W two-stroke engine will have a higher

Lubricating Oil Consumption

Specific Cylinder Oil Consumption

used on MAN B&W two-stroke 1.20

content used on MAN B&W two- 1.20 1.10

Further information on cylinder oil as a function of fuel oil sulphur content

L min: Minimum length of engine

Alternative Cylinder Numbers

Emission regulation TII IMO Tier level

(blank) Fuel oil only

B Exhaust valve controlled

Engine programme series

SFOC for engines with layout on L1 - L3 line [g/kWh]

SFOC for engines with layout on L2 - L4 line [g/kWh]

SFOC for engines with layout on L1 - L3 line [g/kWh]

SFOC for engines with layout on L2 - L4 line [g/kWh]

SFOC for engines with layout on L1 - L3 line [g/kWh]

fuel optimised over a wide power range

blower inlet temperature 45 °C

ambient air pressure 1,000 mbar

ECT: Engine Control Tuning (only available on ME/ME-C engines)