Sikacim Latex - Pds en PDF

PRODUCT DATA SHEET
SikaCim® Latex
BONDING AGENT
DESCRIPTION CHARACTERISTICS / ADVANTAGES

A synthetic rubber emulsion for addition to cement SikaCim® Latex is simply added to the mixing water to
mortars where good adhesion and water resistance provide the following beneficial properties :
are required. ▪ Excellent adhesion.
▪ Reduced shrinkage.
USES ▪ Greater elasticity.
▪ Excellent water resistance.
SikaCim® Latex is a high quality emulsion which sub- ▪ Increased abrasion resistance.
stantially increases the qualities of cement mortars, ▪ Improved chemical resistance.
such as : ▪ Non-toxic.
▪ Thin layer patching mortars. Notes: SikaCim® Latex does not re-emulsify, even in
▪ Rendering. highly alkaline conditions
▪ Floor screeds.
▪ Concrete repair mortars.
▪ Abrasion resistant linings.
▪ Tile fixing mortars.
▪ Masonry mortars.
▪ Bonding agent between old and new concrete.
PRODUCT INFORMATION
Chemical base Styrene Butadiene Liquid
Packaging 10 x 900 mL, Tray
Appearance / Colour Liquid / White
Shelf life 12 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage conditions Store in dry conditions at temperatures between +5 °C and +30 °C. Protect
from direct sunlight and frost.
Density 1.01 ± 0.01 kg/L
Product Data Sheet

SikaCim® Latex
November 2016, Version 02.01
020301010010000172
1/3
APPLICATION INFORMATION
Recommended Dosage Added to the mixing water within the range 1 : 1 – 1 : 4 depending on ap-
plication.
Consumption figures are given in the table.
Latex:Water
1:1 1:2 1:3 1:4
W/C Ratio 0.5 0.8 0.5 0.8 0.5 0.8 0.5 0.8
1:1* 2.3 3.0 1.5 2.1 1.1 1.5 0.9 0.12
1:2* 1.4 1.9 0.9 1.3 0.7 1.0 0.6 0.8
1:3* 1.1 1.5 0.7 1.0 0.5 0.8 0.4 0.6
Note :
*Cement/Sand
APPLICATION INSTRUCTIONS BASIS OF PRODUCT DATA

APPLICATION METHOD / TOOLS All technical data stated in this Data Sheet are based
on laboratory tests. Actual measured data may vary
SUBSTRATE QUALITY / PRE-TREATMENT due to circumstances beyond our control.
Concrete surfaces should be clean, sound and free
from oil, grease, cement laitance and all loosely adher- LOCAL RESTRICTIONS
ing particles.
Absorbent surfaces should be saturated thoroughly Please note that as a result of specific local regula-
Aggregates should be well-graded and thoroughly tions the declared data and recommended uses for
washed. this product may vary from country to country. Please
Sand particle sizes should correspond to thickness of consult the local Product Data Sheet for the exact
mortar to be applied and required surface finish. product data and uses.
Thickness Sand Size
5 - 15 mm 0 - 3.0 mm ECOLOGY, HEALTH AND SAFETY
Over 15 mm 0 - 7.0 mm
For information and advice on the safe handling, stor-
APPLICATION age and disposal of chemical products, users shall refer
For all applications a bonding coat of SikaCim® Latex – to the most recent Safety Data Sheet (SDS) containing
water 1 : 1 mixed with cement and/or sand should be physical, ecological, toxicological and other safety-re-
brushed into the prepared surface. lated data.
Subsequent mortar application must be carried out
whilst the bonding coat is still wet.
LIMITATIONS
▪ Renderings, floor toppings should be allowed to cure
correctly.
▪ Avoid excessive air-entrainment through over-mixing
▪ Do not use SikaCim® Latex as a bonding agent
without adding cement.
Product Data Sheet

SikaCim® Latex
020301010010000172
2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
PT. Sika Indonesia

Jl. Raya Cibinong-Bekasi km.20.
Cileungsi, Bogor 16820 - Indonesia
Tel. +62 21 8230025
Fax. +62 21 8230026
Website: idn.sika.com
email: sikacare@id.sika.com
SikaCimLatex_en_ID_(11-2016)_2_1.pdf
Product Data Sheet

SikaCim® Latex
020301010010000172
3/3

Sikacim Latex - Pds en PDF

Uploaded by

Copyright:

Available Formats

Sikacim Latex - Pds en PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sikacim Latex - Pds en PDF

Uploaded by

Copyright:

Available Formats

PRODUCT DATA SHEET

DESCRIPTION CHARACTERISTICS / ADVANTAGES

Product Data Sheet

APPLICATION INSTRUCTIONS BASIS OF PRODUCT DATA

Product Data Sheet

PT. Sika Indonesia

Product Data Sheet

You might also like