TECHNICAL EVALUATION - Quotation Comparison Sheet

Technical
SPECIFICATION SHEET FOR 320 KVA
Specification PIDILITE INDUSTRIES LTD
DG SET ALTERNATOR
For
Delivery
SPAN INDUSTRIES VAPI Specification Received Date 15/08/2019
Location
Order
1 NOS (ALTERNATOR + DISEL ENGINE Technical Evaluation Date 18/08/2019
Quantity
SPECIFICATION SHEET FOR 320 KVA DG SET ALTERNATOR
PARAMETER SUDHIR JACKSON
4800 X 1500 X 2025( Mentioned size of 4800 X 1500 X 2025( Mentioned size of
1 Length (mm) Width (mm) Height (mm)
enclosure ) enclosure )
2 Wet Weight (kg) 4350 4350
3 Standard Fuel tank Capacity (litre) 480 480
19,22,972.00 " As per quatation dated 14 23,25,000/- " As per quatation dated
4 PRICE
September 2018" 15 March 2019"
BASIC TECHNICAL PARAMETER
OPERATING CONDITIONS :
1 Design & operating Temperature Diesel Engines are designed at 50 Deg C Diesel Engines are designed at 50 Deg C
Noise level @ 1 mt. distance from panel @
2 75 dBA as per CPCB /MoEF Norms 75 dBA as per CPCB /MoEF Norms
Full load
3 Installation altitude above sea level
4 Make & Type Cummins Cummins
5 Model QSL9-G15 QSL9G15
6 Alternator Type CGT Stamford CGT Stamford
Rated continuous kVA Rated kW at 0.8 PF
7 320 KVA 320 KVA
(Lag)
8 Rated voltage 415V 415V
9 Rated Frequency 50 Hz 50 Hz
10 Rated Speed 1500 RPM 1500 RPM
11 No.of phase 3 Ph 3 Ph
12 Neutral ---- ----
13 Rated continuous load current 448 Amps 448 Amps
14 IP class of enclosure IP-23 IP-23
15 Class of insulation H Class H Class
16 Standard temperature rise Within limits of Class H insulation Within limits of Class H insulation
17 Efficiency at rated voltage & 0.8 p.f. ---- ----
18 i. Full load 94 94.6
19 ii. 3/4 load 94.62 94.62
20 iii. Half load 94.36 94.36
0.009 Ohms PER PHASE AT 22°C SERIES STAR 0.009 Ohms PER PHASE AT 22°C SERIES
21 Main Stator
CONNECTED STAR CONNECTED
22 Main Rotor 1.19 Ohms at 22°C 1.19 Ohms at 22°C
23 Exciter Stator 18 Ohms at 22°C 18 Ohms at 22°C
24 Exciter Rotor 0.068 Ohms PER PHASE AT 22°C 0.068 Ohms PER PHASE AT 22°C
25 Governing specification Electronic Electronic
10% overload for 1 hr in 12 hrs of
26 Overload capacity 10% overload for 1 hr in 12 hrs of operation
operation
27 150 % Overload capacity 30 Sec 30 Sec
Class of Insulation.
28 Main Stator H Class H Class
Main Rotor H Class H Class
32 AVR Voltage regulation. YES YES
33 Direction of Rotation CCW from NDE CCW from NDE
34 Bearing Detail Single Bearing Single Bearing
35 Bearing lubrication sealed bearing sealed bearing
36 Waveform Distortion on No Load No load < 1.5 %, No load < 1.5 %,
37 Waveform Distortion on 100% Load ---- ----
38 RF / Telephone interference better than 2% better than 2%
39 Quadrature Droop Kit & Setting Not applicable Not applicable
40 Unbalance load 25% 25%
41 Make Cummins Cummins
42 Model PC 1.1 PC 1.1
Technical Acceptance ( Acceptable / Non-Acceptable
)
Standard Certifications ( ISO / PUC / CE etc.)
Documentatio 1 Manufacturing drawings
n 2 Design Data sheet
management 3 Quality control records

Prepared By Yash B. Maradia Approved By